Scribd
Upload
4K views1 page

LV Cable Commissioning Test Report

This report summarizes cable commissioning test results for a feeder located at an unspecified location. Core continuity, insulation resistance, sheath integrity, and voltage measurements were taken for four cable sections using various instruments. Readings for resistance, voltage, and insulation were recorded for evaluation against acceptance levels. Additional checks confirmed phasing was marked correctly, terminations were tightened, and pillars/switchgear were properly labeled, aligned and secured with no remarks noted.

Uploaded by

Nghiem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

LV Cable Commissioning Test Report

This report summarizes cable commissioning test results for a feeder located at an unspecified location. Core continuity, insulation resistance, sheath integrity, and voltage measurements were taken for four cable sections using various instruments. Readings for resistance, voltage, and insulation were recorded for evaluation against acceptance levels. Additional checks confirmed phasing was marked correctly, terminations were tightened, and pillars/switchgear were properly labeled, aligned and secured with no remarks noted.

Uploaded by

Nghiem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LV CABLE COMMISSIONING TEST REPORT

CABLE NUMBER/S LOCATION: REPORT:

FEEDER:

Preliminary Details: Main backbone identified as section 1, Each tee-off or spur identified as separate section
Section From To Conductor Type and Size:
1
2
3
4

Core Continuity Instrument Number:


Readings in Section A-N B-N C-N A-B B-C C-A
Ohms 1
2
3
4

Insulation Resistance Instrument Number:


Readings in Megohms.
All cable sections together A - B+C+N+E B - A+C+N+E C - A+B+N+E N - A+B+C+E Acceptance Levels
Test Voltage: 1.0kV @ 1Min New 100M, aged 1 M

Sheath Integrity Applicable to metallic Instrument Number:


screen cables only
Readings in All cable sections together Msh- E Msh- E Msh- E Msh- E Acceptance Levels
Megohms. Test Voltage: 1.0kV @ 1Min Greater then 10 M
MEN Resistance Instrument Number:
Readings in Location Ohms Location Ohms
Ohms

Voltage Measurements Instrument Number:


Location Voltage
A-N B-N C-N A-B B-C C-A

LV Phase Out
From: To: Instrument Number:
Voltage Measurement
A1-A2 A1-B2 A1-C2 B1-A2 B1-B2 B1-C2 C1-A2 C1-B2 C1-C2

Phasing marked: Yes / No Cable number marked: Yes / No / NA


MENs replaced: Yes / No Pillars/switchgear labelled: Yes / No
Neutrals replaced: Yes / No Terminations tightened: Yes / No
Fuses replaced: Yes / No Pillars/switchgear correct alignment/depth: Yes / No
Polarity okay: Yes / No Pillars/switchgear closed/locked: Yes / No
REMARKS:…………………………………………………………………………………………………………
……………………..…………………………………………………………………………………………………
TEST OFFICER: DATE: SUPERVISOR:

Page 1 of 1 Form SP0405C01 Ver 4

Ergon Energy Corporation Limited ABN 50 087 646 062

You might also like