Scribd
Upload
41 views2 pages

3412C Fuel System Especificaciones 2

Uploaded by

Juan Carlos Inga Vasquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
41 views2 pages

3412C Fuel System Especificaciones 2

Uploaded by

Juan Carlos Inga Vasquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Service Information System Page 1 of 2

Especificaciones
3412 Generator Set Engines
Número de medio -RENR1387-07 Fecha de publicación -01/08/2015 Fecha de actualización -26/08/2015

i02765338

Fuel Injection Nozzles and Adapters


SMCS - 1106; 1254

Ver imagen

Illustration 1 g01388086

(1) Prior to assembly, lightly lubricate the O-ring seal with zinc stearite.

(A) Select the length of the fuel valve sleeve in order to obtain the following lift setting. ... 0.38 ±
0.05 mm (0.015 ± 0.002 inch)

(2) Torque for valve adapter ... 72 ± 7 N·m (55 ± 5 lb ft)

(3) Select correct spacer thickness in order to provide a valve opening pressure of 15170 ± 1030
kPa (2200 ± 150 psi).

Note: A spring with the nominal load of 127.2 N (29 lb) is required to obtain 15170 ± 1030 kPa
(2200 ± 150 psi) valve opening pressure.

(4) Torque for screw ... 2.7 ± 0.8 N·m (24 ± 7 lb in)

https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/produ... 27/10/2021
Service Information System Page 2 of 2

Note: There must be no leakage around the screw when the nozzle is submerged in calibrating
fluid and pressurized to 13800 ± 1000 kPa (2000 ± 145 psi) for a period of ten seconds.

Note: Always use a new washer seal when the screw is loosened or removed.

ReferenceRefer to Special Instruction, SEHS9083, "Test Sequence For Caterpillar 7000 Series
Fuel Nozzles".

Copyright 1993 - 2021 Caterpillar Inc. Wed Oct 27 2021 04:13:45 GMT-0500 (Hora est. Pacífico, Sudamérica)
Todos los derechos reservados.
Red privada para licenciados del SIS.

https://127.0.0.1/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/produ... 27/10/2021

You might also like