Scribd
Upload
933 views7 pages

Sheet Pile Calculation REF Calculations Output

The document contains calculations to design a sheet pile wall and retaining wall system. It includes: 1) Calculations to determine the earth pressures and required depth of embedment for the sheet pile wall, which is 5.5m. 2) Recommendations for PU18 steel sheet piles based on the bending moment calculation. 3) Design of the concrete retaining wall behind the sheet pile wall including reinforcement details. 4) Check of stability of the retaining wall and recommendation to use the same reinforcement as the concrete sheet pile. 5) Calculation of tie rod capacity for the deadman anchor and check that it exceeds the pressure on the main wall.

Uploaded by

Agboola Oluwasola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
933 views7 pages

Sheet Pile Calculation REF Calculations Output

The document contains calculations to design a sheet pile wall and retaining wall system. It includes: 1) Calculations to determine the earth pressures and required depth of embedment for the sheet pile wall, which is 5.5m. 2) Recommendations for PU18 steel sheet piles based on the bending moment calculation. 3) Design of the concrete retaining wall behind the sheet pile wall including reinforcement details. 4) Check of stability of the retaining wall and recommendation to use the same reinforcement as the concrete sheet pile. 5) Calculation of tie rod capacity for the deadman anchor and check that it exceeds the pressure on the main wall.

Uploaded by

Agboola Oluwasola
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

SHEET PILE CALCULATION

REF CALCULATIONS OUTPUT


2
Earth Pressures KA = Tan (45 – 30/2)
= 0.33
- 2
P a = 17 x 2.5 x 0.33 ≈ 14KN/m
- 2
P = (2 x 2 x 30)1/2 – 17 x 2.5 = 17.5KN/m

Pa = ½ x 17 x 2.5 = 21.25KN/m
For static equilibrium, the resultant moments about C must be equal to zero.
2
[0.5(2qu) – γH]D0 + (-2Pa)D0 + [-Pa(Pa + 6quЎ)] / (γH + qu) = 0

Taking C1 =[0.5(2qu) – γH)] … … … … eqn 1

C2 = -2Pa … … … … eqn 2
C3 = [-Pa(Pa + 6quЎ)] / (γH + qu) … … … … eqn 3
Sum of moments:
2
C1D0 + C2D0 + C3 = 0 … … … … eqn 4

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080


Solving eqn 1, 2 and 3
C1 = 17.5 C2 = -42.5 C3 = -50.19
Substituting in eqn 4
2
17.5D0 – 42.5D0 – 50.19 = 0
Solving the equation above
D0 = 3.3m
Required depth of embedment: Depth of
D = D0 x S.F Embedment D
= 3.3 x 1.4 = 4.6m (say 5.5m) = 5.5m
Required length of sheet pile L = D + H
= 5.5 + 2.5 = 8m L = 8m

Mmax Calculating maximum bending moments at the point of zero shear C


2 - 2 2
Mmax = Pa(0.8 + Ў0) – P (Ў0 )/2 Mmax=60.1KN/m
2 2 2 2
= 21.25 [0.8 +(17 x 2.5 x 0.33)/(2 x 17.5)] – 17.5/2[ (17 x 2.5 x 0.33)/(2 x 17.5)]
2
= 60.1KN/m

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080


Sheet Pile STEEL SHEET PILE
Recommendation Modulus of elasticity = Mmax/fb
6 3 3
= (60.1 x 10 )/(130 x 10 )cm /m
3
= 462 cm /m
PU18 Steel
3
Provide PU18 grade of steel sheet pile (484 cm /m) Sheet Pile

CONCRETE SHEET PILE


Try: h = 300mm, b = 600mm
d = h – c – 1/2Ø – link
= 300 – 75 – 10 – 10 = 205mm d = 205mm

2
K = M/(bd fcu)
6 2
= (60.1 x 10 )/(600 x 205 x 25)
= 0.095

la = 0.5 + √(0.25 – 0.095/0.9)

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080


= 0.87
6
As = [(60.1 x 10 )/(0.95 x 460 x 0.87 x 205)] x (1.5 for lifting and driving stresses)
2
= 1,157mm
Provide Y20 as main bars with Y10 stirrups at 150mm c/c
2
As provided = 1,050mm As provided =
2
1,050mm
RETAINING WALL
Retaining Wall Pa = Ka γH
= 0.33 x 17 x 2.2
2
= 12.3KN/m

Horizontal Forces:
Earth Force = 12.3 x 2.2 x ½ = 13.53KN

Vertical Forces:
Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080
Wall = 0.3 x 2.2 x 24 = 15.84KN
Base = 0.3 x 1.2 x 24 = 8.64KN
Earth = 0.75 x 2.2 x 17 = 28.05KN
Total = 52.53KN

For stability

μ(1 x vertical forces) ≥ 1.6 x horizontal forces


0.5 (1 x 52.53) ≥ 1.6 x 13.53
26.3 ≥ 21.6 (O.K)

Provide main reinforcement same as in concrete sheet pile (Y20)


Provide Y12 as distribution bars

ANCHOR DEADMAN

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080


2
Tie rod capacity = 1/2 γH (Kp – KA)
2
Kp = tan (45 + 30/2)
= 1.73
KA = 1/1.73
= 0.58
2
Tu = ½ x 17 x 1.5 (1.73 – 0.58)
= 21.9KN/m

TA = Tu/Cosα
= 21.9/Cos45
= 29.8KN/m

TA ≥ Pa (main wall)

29.8 ≥ 21.25 (O.K)

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080


- -
P P

-
P -y

Rinitak Construction Limited, Email: [email protected] , Tel.: 08038200676, 09098692080

You might also like