MATERIAL SAFETY DATA SHEET
JA-41001
JAZEERA C PRIMER
Version No: 3 Revision Date: 12/4/2020
1. PRODUCT & COMPANY IDENTIFICATION
PRODUCT NAME JAZEERA C PRIMER
PRODUCT CODE JA-41001
PRODUCT DESCRIPTION See Technical Data Sheet
RECOMMENDED USE See Technical Data Sheet
COMPANY IDENTIFICATION
COMPANY NAME: JAZEERA FACTORY FOR PAINTS CO.
COUNTRY: SAUDI ARABIA
CITY: KHAMIS MUSHAYT.61961
P.O. BOX: 1900
TEL: + 966 17 221 1111
FAX: + 966 17 238 2728
EMERGENCY TEL: + 966 558558921
2. COMPOSITION / INFORMATION ON INGREDIENTS
MATERIAL OR COMPONENT CAS NO OSHA PEL AGGIH TLV WT%
C-9 1330-20-7 100 PPM 100 PPM 20-50
Acrylic resin N/A ---- N/A 20-40
Xylene 1330-20-7 100 PPM 100 PPM 01-10
3. HAZARD IDENTIFICATION
HUMAN AND ENVIRONMENTAL HAZARDS:
Flammability: Flammable
Effects of Exposure: Heated product may produce inhalable
Skin Irritation: Irritant
Eye Irritation: Irritant
Breathing Irritations Irritant to respiratory system
1
MATERIAL SAFETY DATA SHEET
JA-41001
JAZEERA C PRIMER
Version No: 3 Revision Date: 12/4/2020
4. FIRST AID MEASURES
Eyes Contact Immediately flush eyes with fresh water at least 15 times. Contact a physician.
Skin Contact Wash with soap and water, remove contaminated clothing and launder before re-use.
Ingestion If conscious, give plenty of water to drink do not induce vomiting Contact a
physician.
Inhalation Remove to fresh air, give oxygen and/or artificial respiration if required. Contact a
physician.
Others Referral to a physician is recommended if there is any question about the seriousness
or any injury
5. FIRE FIGHTING MEASURES
Flash Point 22-28oC DIN 51758 (Pensky-Martens Closed Cup).
Extinguishing Media Water Jet, CO2 , Dry Chemical, Foam.
Fire Fighting Procedure Use self contained- breathing apparatus.
Unusual Fire/Explosion Hazard Decomposition and composition product may be toxic.
6. ACCIDENT RELEASE MEASURES
SAFETY PRECAUTION
- Open enclosed spaces to outside atmosphere.
- Wear protective clothings , boots , gloves & eye protection.
- Consult the safety measures listed under headings 7 & 8.
SPILL RELEASE PROCEDURES:
Remove spillage by absorbing in nonreactive absorbent material.
WASTE DISPOSAL METHODS:
Consult qualified local or corporate personnel for method that will comply with local, state and
federal health and environmental regulations.
7. HANDLING & STORAGE
Spill Release Procedure
Avoid breathing of vapors or dust. Use absorbent clean-up materials or sweep up. Place in
separate container. Keep out of public sewers & waterways. If entry is threatened or occurs , notify local
authorities. Eliminate all sources of ignition.
2
MATERIAL SAFETY DATA SHEET
JA-41001
JAZEERA C PRIMER
Version No: 3 Revision Date: 12/4/2020
Waste Disposal Methods
In separate closed metal container in accordance with all applicable regulations.
Handling & Storage Precautions
Keep container closed upright when not in use. Store in cool , dry , well ventilated area. Avoid
storage temperature above 100 Degrees Fahrenheit.
Other Precautions
Do not take internally. Avoid prolonged breathing of vapors or dust or spray mist or contact with
skin & eyes. Do not weld or flame cut an empty container. Ground containers when pouring. Destroy
contaminated leather & absorbent shoes.
8. EXPOSURE CONTROL / PERSONAL PROTECTION
Respiratory Protection
Use NIOSH approved organic vapor cartridge respirator when vapor/mist exposure is likely. Use air-
line respirator in confined or restricted ventilation areas. Refer to 29 CFR, OSHA parts 1910, 1915, and
1916 for coating operations.
Ventilation
General mechanical and local exhaust in accordance with ACGI recommendations.
Protective Gloves
Wear impermeable gloves.
Eye Protection
Wear splash-proof chemical goggles
9. PHYSICAL AND CHEMICAL PROPERTIES
Specific Gravity (0.9-1.0) water = 1
Solubility Aromatic Hydrocarbon.
Insolubility Water, Aliphatic Hydrocarbon.
Odor Organic Solvent.
Appearance Liquid
VOC % by volume 22±2 %
Lead content: % Nil
10. STABILITY AND REACTIVITY
Stability Stable
Stability Condition to Avoid Elevated temperature
Materials to Avoid Strong oxidization agents, mineral acids, and bases
Hazardous Decomposition Products Carbon monoxide, Carbon dioxide, and Oxides of Nitrogen
Polymerization Will not occur
3
MATERIAL SAFETY DATA SHEET
JA-41001
JAZEERA C PRIMER
Version No: 3 Revision Date: 12/4/2020
11. TOXICOLOGICAL INFORMATION
No toxicological information is available for this product
12. ECOLOGICAL INFORMATION
Biological degradability Not readily biodegradable
13. DISPOSAL CONSIDERATION
Spill Release Procedure
Avoid breathing of vapors or dust. Use absorbent clean-up materials or sweep up. Place in separate
container. Keep out of public sewers & waterways. If entry is threatened or occurs , notify local authorities.
Eliminate all sources of ignition.
Waste Disposal Methods
In separate closed metal container in accordance with all applicable regulations.
Handling & Storage Precautions
Keep container closed upright when not in use. Store in cool , dry , well ventilated area. Avoid
storage temperature above 100 Degrees Fahrenheit.
Other Precautions
Do not take internally. Avoid prolonged breathing of vapors or dust or spray mist or contact with
skin & eyes. Do not weld or flame cut an empty container. Ground containers when pouring. Destroy
contaminated leather & absorbent shoes.
14. TRASPORT INFORMATION
Land Transport (ADG)
Class : 3
Labeling of vehicles – hazard code : 90 UN No. :1263
Symbol of hazard : 3
Sea Transport ( IMDG )
IMO PSN Code : LCT
IMO Proper Shipping name : Paint or Paint related material.
UN Hazard Class : 3 UN Number1263
4
MATERIAL SAFETY DATA SHEET
JA-41001
JAZEERA C PRIMER
Version No: 3 Revision Date: 12/4/2020
Air Transport ( IATA )
IATA Label : Flammable liquid.
Symbol of Hazard : 3
UN Hazard Class : 3 UN Number1263
15. STATUTORY / REGULATORY INFORMATION
According to the regulations, the following danger labeling of the product is required.
- The Text Flammable
- Danger labeling Xi and N, Dangerous for environment.
R Phrases
- R 36/38 Irritating to eye & skin
- R 43 May cause sensitization by skin contact.
- R 51/53 Toxic to aquatic organisms.
S Phrases
- S 7/9 Keep container tightly closed in well ventilated place.
- S 28 After contact with skin, wash immediately with plenty of soap & water.
- S 36/37/39 Wear suitable clothings , gloves and eye/face protection.
- S 61 Avoid release to the environment.
- S51 Use only in ventilated areas
16. OTHER INFORMATION
- Since the end users working conditions are not known by us the information provided in this safety
data sheet is based on our current level of knowledge.
- The information provided in this safety data sheet relates to the product in the state in which it is
delivered.
- It is intended to describe our products from the point of view of safety requirements & is not intended
to guarantee any particular properties.
- The product must not be used for any purpose other than those specified under heading without first
obtaining written handling instructions.
- It is all times the responsibility of the users to take all necessary measures to comply with legal
requirements & local regulations.
- The information given in this safety data sheet must be regarded as a description of the safety
requirements relating to our product and not guarantee of its properties.
