HR-660
Coiled Tubing
Injector
Proven performance Options
for intermediate range • Manually or hydraulically deployed tubing guides
available in 60-, 72-, and 100-in. radius sizes
applications • Multiple options for tubing depth and speed
counters available
Engineered and manufactured for rugged reliability and reduced • Fold-down walkways
maintenance, we’ve manufactured over 2,200 coiled tubing injectors so • Electronic or hydraulic load cells
you can rely on our field-proven designs.
• Fall protection device
Whether you are packaging a new, custom-built unit with the
HR-660 model injector or just replacing an existing one, our injectors
have the performance and dependability that is required in the
Upgrades and accessories
toughest oilfield conditions around the world.
• Condition-based monitoring (CBM) system
Designed to handle 1- to 2⅜-in. coiled tubing strings with
superior slow speed control (inches per minute), the HR-660 has • Transport stands with or without hydraulic tilt frame
an 60,000-lb continuous lifting capacity and 30,000-lb continuous
snubbing capacity. • Injector or tilt frame-mounted stabbing winch
• Injector auto-lubrication system
The free-floating traction systems enhance performance and reliability
in the field by reducing dynamic loads on the coiled tubing and injector
components.
[email protected] nov.com/hydrarig
© 2021 NOV Inc. All Rights Reserved. 11938 v02
HR-660 Coiled Tubing Injector
Drive system
Specifications
Maximum speed (min. displacement) 250 ft/min • Deep reduction, purpose-built gear drives
Maximum speed (max. displacement) 125 ft/min
• Dual hydraulic motor input (variable displacement,
Horsepower 100-hp continuous at 120° F
piston motors)
Lifting capacity through outer frame 70,000 lb
Lifting capacity from stripper 60,000 lb • Counterbalance valves
Assembled weight: 72-in. gooseneck • Dual oil seals on gear drive output shafts for long and
7,600 lb
installed, no stripper reliable service
• Dual spring applied/pressure released brakes
mounted between the hydraulic drive motors and
gear drives
Traction system
• Reduced remove/install time with our “quick
disconnect” gripper system (1-3 seconds)
• Hardened and grooved single piece grippers
• Pocket-style elastomer gripper block suspension
system
• Reduced injector chain maintenance due to sealed-
for-life gripper carrier roller bearings
• Independent sets of traction system hydraulic
cylinders
• 180-pitch heavy-duty roller chains
HR-660 in offshore transport skid with hose reel and tilt frame
[email protected] nov.com/hydrarig
© 2021 NOV Inc. All Rights Reserved. 11938 v02
