Configuration Guide of
HP WLAN Infrastructure
for OmniTouch™ 8118/8128 WLAN Handset
8AL90453USAA ed02
April 2013
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Table of Content
1. SOFTWARE VERSIONS ............................................................................................................................... 3
2. GLOSSARY ................................................................................................................................................... 3
3. INITIAL CONFIGURATION ......................................................................................................................... 5
4. NETWORK CONFIGURATION .................................................................................................................... 6
5. VSC CONFIGURATION................................................................................................................................ 9
6. VSC BINDING ............................................................................................................................................. 11
8AL90453USAA ed02 2
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
1. Software versions
This paragraph lists all software versions tested for the concerned product or features.
Device Model Software version
Handsets-EL OT8118 4.2.2
Handsets-HE OT8128 4.2.2
HP WLAN Controller MSM710 5.7.2.0-12736
HP Access Point MSM320 5.7.2.0-12736
HP Access Point MSM422 5.7.2.0-12736
Call Server OXE R10.0-j1.410-23-e
Call Server OXE R9.1-i1.605-21-d
2. Glossary
Abbreviation Description
ALU Alcatel-Lucent
AOS Alcatel-Lucent OmniAccess operating system Software
AP Access Point
CAC Call Admission Control
CNG Comfortable Noise Generation
DFS Dynamic Frequency Selection
EAP Extensible Authentication Protocol
EDCA Enhanced Distributed Channel Access
EL Entry Level handset
HE High End handset
MS-CHAP Microsoft version of the Challenge-handshake authentication protocol
MIPT Alcatel-Lucent Mobile IP Touch
NRT Non-Regression Test
OAW OmniAccess Wireless
PEAP Protected Extensible Authentication Protocol
PTT Push To Talk
QoS Quality of Service
RF Radio Frequency
8AL90453USAA ed02 3
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Abbreviation Description
TBC To Be Checked
TBD To Be Defined
TSPEC Traffic SPECifications
U-APSD Unscheduled Automatic Power Save Delivery
UP User Priority
VAD Voice Activity Detection
VoWLAN VoIP over WLAN
WMM Wireless MultiMedia
WMM-PS WMM Power Save
WMM-AC WMM Admission Control
WFA Wi-Fi Alliance
WPA Wi-Fi Protected Access
8AL90453USAA ed02 4
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
3. Initial configuration
Login the WebUI of the HP MSM710 controller.
And accept the “License Agreement”
Then click “Register later”
8AL90453USAA ed02 5
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Select the country and save the configuration.
Now, the default configuration page displays as below:
4. Network configuration
Click the “Service Controller” in the left, and select “Network -> LAN Port”
Configure the IP address of the LAN port or Internet port.
Then you may add VLANs in “VLAN configuration” menu. The VLANs need to be attached into the
related port.
8AL90453USAA ed02 6
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
5. AP Provisioning
Power on HP access point with default settings, AP will get a IP address from DHCP Server,
Login the WebUI of the MSM320/422 Access Point with username: admin/password:admin.
Press ‘Provision’ button
Click the ‘connectivity’ box and press save button below.
8AL90453USAA ed02 7
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Add IP address in the right box, and click ‘Discover using IP address’.
Click ‘Discovery’ box and press save button,
Enter the location information and click ‘Location’ box.
Press save button to finish.
8AL90453USAA ed02 8
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Restart the AP and it will connect to the controller.
6. VSC configuration
Create a new “VSC profile” in “Network Tree”
Unclick “Access control”
If using WPA-PSK/WPA2-PSK, please enable “Wireless protection”;
Select “WPA”;
In “Mode” field, choose “WPA” or “WPA2” or “WPA or WPA2”
In “Key source” field, select “Preshared Key” and enter the “Key”
If using 802.1x authentication, please enable “Wireless protection”;
Select “WPA”;
In “Mode” field, choose “WPA” or “WPA2” or “WPA or WPA2”
8AL90453USAA ed02 9
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
In “Key source” field, select “Dynamic”
Then the “802.1x authentication” parameters will be displayed as below.
Choose “Local” or “Remote” Radius Server.
Enter the “SSID” in “Virtual AP” field as below. Modify the “DTIM count” to “5”
Enable “WMM” in QoS field.
8AL90453USAA ed02 10
Configuration Guide of HP WLAN Infrastructure for
OmniTouch™ 8118/8128 WLAN Handset
Now the VSC profile has been created.
7. VSC binding
If the administrator wants separate the SSID into different VLANs. It need to configure the “VSC
bindings” in the AP Group as below.
END OF DOCUMENT
8AL90453USAA ed02 11
