Scribd
Upload
83 views4 pages

CT 1 MCQ Ans

This document contains an answer key for a linear integrated circuits exam with 20 multiple choice questions. Some key points: - Questions test concepts like op-amp characteristics, gain calculations, compensation techniques and their effects. - Answers explore properties such as input bias current, slew rate, phase relationships, gain calculations and bandwidth improvements. - Calculations include determining maximum output offset voltage, compensative resistance values, and operating frequencies. - Sections cover topics like op-amp fundamentals, characteristics, applications and compensation methods.

Uploaded by

Varshni Karthikeyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views4 pages

CT 1 MCQ Ans

This document contains an answer key for a linear integrated circuits exam with 20 multiple choice questions. Some key points: - Questions test concepts like op-amp characteristics, gain calculations, compensation techniques and their effects. - Answers explore properties such as input bias current, slew rate, phase relationships, gain calculations and bandwidth improvements. - Calculations include determining maximum output offset voltage, compensative resistance values, and operating frequencies. - Sections cover topics like op-amp fundamentals, characteristics, applications and compensation methods.

Uploaded by

Varshni Karthikeyan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Cycle test-1 Answer key

Course 18ECC202J - Linear Integrated Circuits


Duration: 60 minutes
Sem. : IV Semester / B.Tech (ECE)Max. Marks : 25
Date: 20.2.2021

Section-A
1. Identify the component which causes roll off of gain at higher frequency of op-amp
A. Resistive
B. Capacitive
C. Inductive
D. Both resistive and inductive
Ans: --Capacitive (B)

2. Identify, which is not a characteristic of an ideal op-amp


A. Infinite voltage gain
B. Zero output resistance
C. Zero slew rate
D. Infinite common-mode rejection ratio

Ans: --Zero slew rate (C)

3. Calculate the output voltage of an open-loop non-inverting amplifier,


Where input voltage is 10 mV, open loop gain=2,00,000, input resistance= 2 MΩ,
output resistance= 75 Ω, and output voltage swing=± 14 V.
A. 10 mV
B. -14 V
C. 14 V
D. -10 mV

Ans: ---- 14 V (C)

4. Identify the dc characteristic of an op-amp, if ,


where, are current going to non-inverting and inverting input terminal of an
op-amp respectively.
A. Input bias current
B. Input offset current
C. Input offset voltage
D. Thermal drift
Ans: -- Input bias current (A)
5. What is the value of compensative resistance needed to reduce the effect of input bias
current for the non-inverting amplifier having input resistance (R1) =5 KΩ and
feedback resistance (Rf)=15 KΩ?
A. 2.75 KΩ
B. 3.75 KΩ
C. 4.5 KΩ
D. 3.5 KΩ

Ans: -- 3.75 KΩ (B)

6. Identify the voltage gain of a voltage follower


A. 1
B. 2
C. 0
D. ∞

Ans: -- 1 (A)
7. Identify the slew rate in V/μsecof 741C op-amp
A. 0.1
B. 1
C. 0.7
D. 0.5
Ans: --- 0.5 (D)
8. The open-loop op-amp shows the first corner frequency 100 Hz, second corner
frequency 125 Hz, and third corner frequency 175 Hz. What is the improvement of
bandwidth in pole-zero compensation compared to dominant pole compensation?
A. 25 Hz
B. 50 Hz
C. 75 Hz
D. 100 Hz

Ans: -- 25 Hz (A)

9. The dc open-loop gain of an op-amp is 50,000. Identify the phase angle of open-loop
gain when operating frequency at its break frequency or corner frequency.
A. -900
B. -450
C. 00
D. -750

Ans: -- -450 (B)


10. What is the maximum output offset voltage for the inverting amplifier having input
resistance (R1) =6 KΩ and feedback resistance (Rf)=12 KΩ caused by input offset
voltage . Given =3 mV?
A. 7 mV
B. 8 mV
C. 9 mV
D. 10 mV
Ans: -- 9 mV (C)

11. What is the value of feedback resistance ( in a voltage follower circuit?


A.1
B. 0
C. ∞
D. -1

Ans: -- 0 (B)
12. What is difference in phase between input voltage and output voltage of an inverting
amplifier?
A. 00
B. 1800
C. 900
D.
1350

Ans: -- 1800 (B)

13.How many resistors are used in pole zero frequency compensation technique?
A. 1
B. 2
C. 3
D. 4
Ans: -- 2 (B)
14.Calculate the break frequency or corner frequency of an open-loop op-amp whose output
resistance (R0) =100 Ω and presence of capacitive component at the output side is 100
µFarad.
A. 16.5 Hz
B. 15.5 Hz
C. 15.9 Hz
D. 15.1 Hz

Ans: -- 15.9 Hz (C)


15.Calculate the magnitude of an open-loop voltage gain of an op-amp in dB for operating
frequency 200 Hz, and the corner frequency 100 Hz. Where the magnitude of the open-loop
voltage gain of an op-amp for operating frequency at 0 Hz is 60 dB.
A. 65 dB
B. 57 dB
C. 53 dB
D. 61 dB

Ans: -- 53 dB (C)
Section-B
16.Derive the slew rate equation for a voltage follower, if input applied to voltage follower is
.
17.An inverting amplifier having input resistance (R1) =15 KΩ and feedback resistance
(Rf)=150 KΩ, input bias current =300 nano ampere, the input offset current= 100 nano
ampere, input offset voltage = 3 millivolt. Calculate the maximum output offset voltage if
compensative resistance is used in the circuit.
18.A non-inverting amplifier is nulled at 250 C. Find the value of input offset voltage if the
temperature rises to 400 C for an offset voltage drift 0.25 .
19. Design a non-inverting amplifier, whose closed loop gain=5, and input resistance =1 KΩ.
20 Calculate the maximum frequency of for a sine wave whose output voltage is 15-volt peak
with an op-amp whose slew rate is 1 .

You might also like