SERIES 56 / 57
Resilient Seated Butterfly Valves
for Higher Pressure Applications
DelVal
Wafer, Lug Body ®
Flow Controls
WARR
AR
ANT
3.-YE
delvalflow.com
1-833-DELVAL1
STANDARD FEATURES
Quality & Performance
DelVal Flow Controls provides a wide range of quality products with the reliability you can count on. All Series 56 /57 valves are
manufactured in ISO 9001 certified facilities with a robust quality management system and according to API 609 and BS EN 593
standards.
Design Construction and Features
7 1
1. ISO Top Flange
The top flange is drilled as per ISO 5211 8
to accommodate direct mounting of a 10
wide range of actuators and manual
operators. 9
2. Heavy Duty Body
Ribbed wafer body from 2"-10" and four 6 2
locating holes on wafer bodies in sizes 5
12" and larger. Standard construction
ensures installation between ASME
Class 150 / Class 125.
3
3. Disc
High strength disc with polished edge
and hubs. Nylon PA 12 coated disc
ensures excellent resistance to several 4
chemical media. The hard, non-porous
sintered polymer has very low
hygroscopicity and is suitable for use in
drinking water and non-alcoholic food 11
safe applications.
4. Seat
2'' to 24'' valves are constructed with
cartridge seat by permanently bonding a
resilient elastomer to a rigid backing
ring. This gives advantages of bonded
6. Secondary Seal 9. Bearings
seat while also replaceable. Seat is slip-
Double O-rings are molded in both The drive and non-drive end stem “Bear-
fitted into the body, no need of special
upper and lower journals providing a G” bearings are made of high
tools.
superior secondary seal. compressive strength polymers, which
For sizes larger than 26'' and onward,
provides rigid stem support, reduces
valve seat is in-situ molded which
friction, and isolates stem from valve
provides complete isolation of flowing
body.
media from the body. 7. Stem Retention System
The seat also features face o-rings which Unique stem, retention system provides 10. Stem Seal
eliminates the use of flange gaskets. anti-blowout stem, and easy assembly Bi-directional ‘U’ cup stem seal.
and disassembly of valve.
11. Disc - Stem Sealing
5. Disc - Stem Connection Precision machined radius on the upper
Dry stem journal reduces potential for 8. Bushing and lower disc hubs is pressed against
leakage. Stem with close tolerance Heavy duty bushing absorbs the forces upper and lower seat sealing faces for
square / double-D drive eliminates the acting on the stem / disc assembly due achieving primary sealing between disc
need of disc screws and taper pins. to line pressure. and seat.
DIMENSIONS AND WEIGHTS (WAFER / LUG) ØF SQ H
J
SEE CHART FOR ACTUATOR ØG
MOUNTING FLANGE DRILLING
J
0
45
K
FOR 14" & ABOVE
L
ØA B
Dimensions (mm)
Valve Size Top Flange Drilling Lug Bolting Data App. Weight (kg)
ØA *B E L ØF No. of Hole Sq. H ØG J Key Size K No. of Threads Wafer Lug
Inch DN BC BC
Holes Dia. Holes UNC/UN - 2B (Series 56) (Series 57)
2 50 96 43 115 78 90 70 4 10 14 ---- 16 ---- 32.6 120.7 4 5/8-11 UNC 2.5 3.5
2.5 65 108 46 125 80 90 70 4 10 14 ---- 16 ---- 48.2 139.7 4 5/8-11 UNC 3.3 3.8
3 80 126 46 130 85 90 70 4 10 14 ---- 16 ---- 63.0 152.4 4 5/8-11 UNC 3.6 4.0
4 100 154 52 152 105 90 70 4 10 14 ---- 16 ---- 84.2 190.5 8 5/8-11 UNC 6.0 8.0
5 125 175 56 165 125 90 70 4 10 17 ---- 19 ---- 117.3 215.9 8 3/4-10 UNC 7.0 11.0
6 150 216 56 180 140 90 70 4 10 17 ---- 19 ---- 135.9 241.3 8 3/4-10 UNC 12.0 14.0
8 200 272 60 230 175 150 102/125 4 12/14 19 ---- 21 ---- 186.1 298.5 8 3/4-10 UNC 22.5 24.0
10 250 327 68 255 216 150 102/125 4 12/14 22 ---- 24 ---- 236.4 362.0 12 7/8-9 UNC 24.0 30.0
12 300 380 78 285 240 150 125 4 14 27 ---- 29 ---- 282.6 431.8 12 7/8-9 UNC 37.0 45.0
14 350 430 78 340 280 210 165 4 22 ---- 40.0 51 10.00 x 10.00 315.7 476.3 12 1-8 UN 60.0 69.5
16 400 482 102 360 310 210 165 4 22 ---- 40.0 51 10.00 x 10.00 367.3 539.8 16 1-8 UN 75.0 97.0
18 450 540 114 390 347 210 165 4 22 ---- 50.0 64 10.00 x 12.00 421.6 577.9 16 1 1/8-8 UN 115.0 151.0
20 500 600 127 430 390 210 165 4 22 ---- 50.0 64 10.00 x 12.00 471.0 635.0 20 1 1/8-8 UN 156.0 178.0
24 600 692 154 495 461 210 165 4 22 ---- 63.5 102 15.88 x 15.88 572.7 749.3 20 1 1/4-8 UN 195.0 245.0
26 650 745 165 555 475 300 254 8 18 ---- 63.5 102 15.88 x 15.88 589.0 806.4 24 1 1/4-8 UN 272.0 377.0
28 700 795 165 580 495 300 254 8 18 ---- 76.2 102 19.05 x 19.05 651.0 863.6 28 1 1/4-8 UN 305.0 389.0
30 750 820 165 595 530 350 298 8 21 ---- 76.2 102 19.05 x 19.05 698.0 914.4 28 1 1/4-8 UN 373.0 493.0
32 800 870 190 670 568 350 298 8 21 ---- 76.2 102 19.05 x 19.05 852.0 977.9 28 1 1/2-8 UN 403.0 597.0
36 900 1025 203 705 660 350 298 8 21 ---- 88.9 134 22.23 x 15.88 870.0 1085.8 32 1 1/2-8 UN 607.0 956.0
40 1000 1120 216 782 675 415 356 8 32 ---- 101.6 134 25.40 x 19.05 952.0 1200.3 36 1 1/2-8 UN 829.0 971.0
42 1050 1140 251 815 726 415 356 8 32 --- 101.6 134 25.40 x 19.05 1020 1257.3 36 1 1/2-8 UN 860.0 1150.0
44 1100 1190 251 845 740 415 356 8 32 --- 101.6 134 25.40 x 19.05 1070 1314.4 40 1 1/2-8 UN 950.0 1270.0
48 1200 1293 276 910 800 415 356 8 32 ---- 110.0 140 28.00 x 16.00 1120.0 1422.4 44 1 1/2-8 UN 1212.0 2053.0
Dimensions (Inch)
Valve Size Top Flange Drilling Lug Bolting Data App. Weight (lbs)
ØA *B E L ØF No. of Sq. H ØG J Key Size K No. of Threads Wafer Lug
Inch DN BC Hole Dia. BC
Holes Holes UNC/UN - 2B (Series 56) (Series 57)
2 50 3.78 1.69 4.53 3.07 3.54 2.76 4 0.39 0.55 ---- 0.63 ---- 1.28 4.75 4 5/8-11 UNC 5 7
2.5 65 4.25 1.81 4.92 3.15 3.54 2.76 4 0.39 0.55 ---- 0.63 ---- 1.89 5.50 4 5/8-11 UNC 7 8
3 80 4.96 1.81 5.12 3.35 3.54 2.76 4 0.39 0.55 ---- 0.63 ---- 2.47 6.00 4 5/8-11 UNC 7 8
4 100 6.06 2.06 5.98 4.13 3.54 2.76 4 0.39 0.55 ---- 0.63 ---- 3.31 7.50 8 5/8-11 UNC 13 17
5 125 6.89 2.19 6.50 4.92 3.54 2.76 4 0.39 0.66 ---- 0.75 ---- 4.61 8.50 8 3/4-10 UNC 15 24
6 150 8.50 2.19 7.09 5.51 3.54 2.76 4 0.39 0.66 ---- 0.75 ---- 5.35 9.50 8 3/4-10 UNC 26 30
8 200 10.71 2.38 9.06 6.89 5.90 4.01/4.92 4 0.47/0.55 0.74 ---- 0.83 ---- 7.32 11.75 8 3/4-10 UNC 49 52
10 250 12.87 2.69 10.03 8.50 5.90 4.01/4.92 4 0.47/0.55 0.86 ---- 0.94 ---- 9.30 14.25 12 7/8-9 UNC 52 66
12 300 14.96 3.06 11.22 9.44 5.90 4.92 4 0.55 1.06 ---- 1.13 ---- 11.12 17.00 12 7/8-9 UNC 81 99
14 350 16.93 3.06 13.39 11.02 8.26 6.50 4 0.86 ---- 1.57 2.00 0.39 x 0.39 12.42 18.75 12 1-8 UN 132 152
16 400 18.98 4.00 14.17 12.20 8.26 6.50 4 0.86 ---- 1.57 2.00 0.39 x 0.39 14.46 21.25 16 1-8 UN 165 213
18 450 21.26 4.50 15.35 13.66 8.26 6.50 4 0.86 ---- 1.97 2.50 0.39 x 0.47 16.59 22.75 16 1 1/8-8 UN 253 332
20 500 23.62 5.00 16.93 15.35 8.26 6.50 4 0.86 ---- 1.97 2.50 0.39 x 0.47 18.54 25.00 20 1 1/8-8 UN 343 391
24 600 27.24 6.06 19.48 18.15 8.26 6.50 4 0.86 ---- 2.50 4.00 0.62 x 0.62 22.54 29.50 20 1 1/4-8 UN 429 539
26 650 29.33 6.50 21.85 18.70 11.81 10.00 8 0.71 ---- 2.50 4.00 0.62 x 0.62 23.19 31.75 24 1 1/4-8 UN 598 829
28 700 31.30 6.50 22.83 19.49 11.81 10.00 8 0.71 ---- 3.00 4.00 0.75 x 0.75 25.63 34.00 28 1 1/4-8 UN 671 855
30 750 32.28 6.50 23.43 20.87 13.78 11.73 8 0.83 ---- 3.00 4.00 0.75 x 0.75 27.48 36.00 28 1 1/4-8 UN 820 1084
32 800 35.43 7.48 26.38 22.36 13.78 11.73 8 0.83 ---- 3.00 4.00 0.75 x 0.75 33.54 38.50 28 1 1/2-8 UN 886 1313
36 900 40.35 7.99 27.76 25.98 13.78 11.73 8 0.83 ---- 3.50 5.25 0.88 x 0.62 34.25 42.75 32 1 1/2-8 UN 1335 2103
40 1000 44.09 8.50 30.79 26.57 16.33 14.02 8 1.25 ---- 4.00 5.25 1.00 x 0.75 37.48 47.25 36 1 1/2-8 UN 1823 2662
42 1050 44.88 9.88 32.09 28.58 16.33 14.02 8 1.25 --- 4.00 5.25 1.00 x 0.75 40.15 49.50 36 1 1/2-8 UN 1892 2530
44 1100 46.85 9.88 33.27 29.13 16.33 14.02 8 1.25 --- 4.00 5.25 1.00 x 0.75 42.12 51.75 40 1 1/2-8 UN 2090 2794
48 1200 50.91 10.88 35.83 31.50 16.33 14.02 8 1.25 ---- 4.33 5.51 1.10 x 0.63 44.09 56.00 44 1 1/2-8 UN 2666 4516
*Face to face dimension ‘B’ conforming to API 609 category A / BS EN 558 Series 20 / ISO 5752 Series 20 / MSS SP 27 / ASME B16.10, sizes 40''and above will have 2 keys 180 deg. apart.
DelVal reserves rights to change the contents without notice.
TORQUE DATA (Nm/Lbf-Inch)
Differential Pressure (∆P)
PN 3.5 / 50 Psi
Inch DN PN 6 / 100 Psi PN 10 / 150 Psi PN 12 / 175 Psi PN 16 / 230 Psi PN 20 / 285 Psi
(Undercut Disc)
Nm Lbf-Inch Nm Lbf-Inch Nm Lbf-Inch Nm Lbf-Inch Nm Lbf-Inch Nm Lbf-Inch
2 50 --- --- 8 72 9 80 10 91 17 150 31 275
2.5 65 --- --- 14 124 16 142 17 150 22 195 40 355
3 80 --- --- 16 142 20 177 22 197 32 283 58 514
4 100 15 133 29 256 31 271 32 279 45 398 81 738
5 125 21 187 44 393 48 426 50 443 65 575 117 1036
6 150 30 267 62 545 66 582 70 620 110 974 132 1168
8 200 70 623 110 977 122 1083 128 1133 210 1859 252 2231
10 250 87 771 179 1586 198 1756 208 1841 319 2823 383 3390
12 300 142 1259 302 2677 337 2987 355 3146 468 4142 562 4974
14 350 244 2159 398 3527 450 3980 – – 690 6106 863 7639
16 400 297 2627 500 4428 585 5178 – – 925 8187 1156 10231
18 450 412 3649 822 7273 989 8756 – – 1192 10550 1490 13188
20 500 484 4285 954 8441 1144 10126 – – 1506 13329 1883 16666
24 600 734 6500 1410 12482 1760 15576 – – 3029 26809 3786 33509
26 650 1063 9408 2202 19488 2750 24338 – – 4200 37173 – –
28 700 1266 11204 2640 23364 3320 29382 – – 6204 54910 – –
30 750 1465 12965 3083 27285 3900 34515 – – 7493 66318 – –
32 800 1755 15532 3715 32878 4740 41949 – – 8782 77728 – –
36 900 2342 20727 4975 44029 6420 56817 – – 12142 107465 – –
40 1000 3085 27302 6175 54649 8165 72260 – – 16122 142691 – –
42 1050 4317 38208 8475 75010 11300 100013 – – 18838 166730 – –
44 1100 4995 44209 9797 86710 13368 118316 – – 21553 190760 – –
48 1200 6328 56007 12430 110014 16950 150020 – – 26984 238828 – –
DelVal reserves rights to change the contents without notice.
STANDARD MATERIALS OF CONSTRUCTION
(2" to 24") 10
8
7
6 1
3
13
2
12
14
4 15
16
11
Part List
Item Description Standard Material* Item Description Standard Material*
ASTM A126 Class B Polyacetal
ASTM A395 60-40-18 8** Stem Bushing
1 Body RPTFE
ASTM A216 WCB
ASTM A351 CF8M / CF3M
9 Stem Retainer ASTM A240 SS304
ASTM A536 65-45-12 + NYLON 12 COATED
ASTM A536 65-45-12 + AROXY COATED
2 Disc ASTM A684 Gr. 1070
ASTM A351 CF8M / CF3M 10** Retainer Circlip
NAB ASTM A148 C95800 ASTM A313 SS302
Seat with EPDM 11 O-ring NBR (BUNA-N)
3** Replaceable NBR (BUNA-N)
Metal Insert Viton® (FKM)
ASTM A684 Gr. 1074
12** Spring Dowel Pin
ASTM A479 SS410-L2 ASTM A313 SS302
Stem ASTM A564 17-4 PH Type 630
4 Key
(Upper / Lower) ASTM A182 F51 / F55 13 En8
ASTM A479 SS316 (14 to 24'')
Bottom Plate ASTM A516 Gr. 70
5** Sleeve Bearing Bear-G 14
(24") ASTM A240 SS304
Packing Punch Washer
6** RPTFE 15 ASTM A240 SS304
Support (24")
Stem Seal Hex Hd. screw
7 ** NBR (BUNA-N) 16 ISO 3506 A2-70
(Double U-cup) (24")
*Other materials may be available on request
**Recommended spares
STANDARD MATERIALS OF CONSTRUCTION
(26" to 48")
10
9
15
8
16
7
6 4
1
5
4 1a
2 3
11
12
13
17 14
Part List
Item Description Standard Material* Item Description Standard Material*
ASTM A126 Class B 7 Stem Bushing Phosphorous Bronze
ASTM A395 60-40-18
1 Body
ASTM A216 WCB ASTM A684 Gr.1070
ASTM A351 CF8M / CF3M 8 Retainer Circlip
ASTM A313 SS302
ASTM A516 Gr.70
EPDM 9 Retaining Ring
ASTM A240 SS304
1a Seat NBR (BUNA-N
Viton® (FKM) 10 Soc. Hd. Screw ISO 3506 A2-70
ASTM A536 65-45-12 + NYLON 12 COATED 11 O-ring NBR (BUNA-N)
ASTM A536 65-45-12 + AROXY COATED
2 Disc
ASTM A351 CF8M / CF3M ASTM A516 Gr.70
NAB ASTM A148 C95800 12 Bottom Plate
ASTM A240 SS304
ASTM A479 SS410-L2 13 Punch Washer ASTM A240 SS304
Stem ASTM A564 17-4 PH Type 630
3
(Upper / Lower) ASTM A182 F51 / F55
ASTM A479 SS316 14 Hex Hd. Screw ISO 3506 A2-70
4 Sleeve Bearing Bear-G 15 Key En8
5 Packing Support RPTFE 16 Hex Hd. Screw ISO 3506 A2-70
Stem Seal
6 NBR (BUNA-N) 17 Plug ISO 3506 A2-70
(Double U-cup)
*Other materials may be available on request
Standards and Specifications
DelVal series 56/57 Butterfly Valves are designed and manufactured to meet the requirements of the following
industry standards:
Design: API 609, BS EN593 Body Style: One-Piece
Face to Face: API 609 Category-A, BS EN558 Series 20, Rating: 2'' to 24'' PN20 / 285 Psi max.
ISO 5752 Series 20 26'' to 48'' PN16 / 230 Psi max.
Testing: API 598, BS EN 12266-1 Temp Range:* -29oC to 200oC,
-20oF to 390oF
Flange Standard: ASME B16.5 Class 150, ASME B16.47 Class 150,
Size Range: 2" to 48"
Other International Standards
Seat Temperature Limits
Temperature Limits*
Seat Type
Lower Limits Upper Limits
EPDM -200F (-290C) 3020F (1500C)
NBR (BUNA-N) 00F (-180C) 2120F (1000C)
Viton® (FKM) 00F (-180C) 3900F (2000C)
*Temperature range shall be the lesser of the seat temperature or disc coating temperature.
End-of-Line Service
Lug body valves may be used in end-of-line service with downstream piping removed.
2” to 24” (DN 50 to DN 600) lug type butterfly valves are suitable for pressure up to PN10 /150 Psi and 26” to 48” (DN 650 to DN
1200) up to PN16 / 230 Psi with downstream piping removed.
Operator Information
Valves up to size 12”can be Valves of all sizes can be direct All valves can be direct mounted
supplied with lever handles for mounted with gear operators for with pneumatic actuators or
manual operation. Optional manual operation. Gear operators electric actuators and accessories
accessories for hand-lever can also be attached with chain- for complete on-off automation or
operation can be provided for wheel operators for opening or modulating control. Valves can be
various flow control requirements. closing valves located on pipelines mounted with manual overrides.
Pad locking can also be provided at high elevations.
for preventing unauthorized
operation.
100% TESTING
100% SERIALIZATION
CERTIFICATES
ANCE M TAL MAN L HEALT VES CAT.
UR EN NA AL
API
AN
AG
CUPATIO
TERFLY V
H&
LITY ASS
A&
ENVIROM
ISO ISO OHSAS
AGEMENT
EMENT
609
SAFETY
B API 6
9001 14001 18001 CAT A&B
UA
OC
UT
09
Q B
Manufacturing & Sales - International Manufacturing & Sales - Americas DelVal Arizona International Projects
DelVal Flow Controls Pvt. Ltd. DelVal Flow Controls USA DelVal Flow Controls USA DelVal Flow Controls USA
Gat No: 25, Kavathe 6068 Highway 73 1120 W Alameda Dr., Suite 3 77 Sugar Creek Center Blvd.,
Post-Javale, Tal. Khandala Geismar, Louisiana 70734 | USA Tempe, Arizona 85282 | USA Suite 600
Dist. Satara Pin-412801 | India T: +1 833-DELVAL1 T: +1 623-215-7146 Sugarland, Texas 77478 | USA
[email protected] F: +1 225-744-4328 F: +1 623-215-7187 T: +1 833-DELVAL1
[email protected] [email protected] [email protected]
delvalflow.com
PC.BFV.016.00
