MCLN1 Series
Industrial one channel 10/100M Ethernet Media Converter
Product Description
The KBC MCLN1 series is an industrial 10/100M Ethernet media converter(MC). It supports transmission of one
channel 10/100Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex
operation. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment
needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure
and electrical protection makes it suit for application in harsh environment.
The series is available in wall, DIN, and 2U passive rack FR2-12, or card version in 2U chassis FR2-16.
Product Features
10/100M auto sensing
2kV Surge Protection on RJ45 electrical Port
Compatible with SFP version of MCLN1 series, PoE version of MCLS1 series, and two channel 10/100M media
converter MCLN2 series
SM(Single Mode) and MM(Multi Mode)
1 fiber or 2 fibers
SM&MM: 1310nm/1550m for 1 fiber, 1310nm for 2 fibers
Typical SM and MM transmission distance are 20km and 2 km respectively, longer distance is available
IP40 enclosure
DIN, Wall Mount or 2U Card version
FR2-12 passive Rack with 12 slots or Chassis card in FR2-16 with 16 slots
Typical System Configuration
Specsheet-MCLN1_Series-Rev1803 www.kbcnetworks.com
Copyright© KBC Networks 2018
Specifications
Standards Power
IEEE Standards IEEE802.3 10Base-TX Power Input +12Vdc
IEEE802.3u 100Base-TX Power consumption < 3W
IEEE802.3u 100Base-FX Power Supply (2) Input: 100 ~ 240Vac
Electrical Output: +12Vdc
Data Port 1 Chassis Card Supplied from FR2 PSU
Data Rate 10/100Mbps Auto-Sensing
Half & Full Duplex Environmental
Surge Protection 2kV Operating Temperature -40° ~ +75°C
Storage Temperature -40° ~ +85°C
Optical Operating Humidity 0 to 95% non-condensing
Port 1 Mean Time Between Failure (MTBF) > 100,000 Hours
Wavelength 1 fiber SM&MM: 1310nm/1550nm
2 fibers SM&MM: 1310nm Enclosure Protection IP40
Fiber 1 or 2
MM (50/62.5/125μm) Connectors
SM (9/125μm) 10/100M Electrical RJ-45
Fiber (3) SC, FC or ST
Typical Loss Budget 12dB Power (4) Wall Mount/DIN Rail Screw Block Terminal
Typical Distance (1) Multimode: 2km
Singlemode: 20km Others
Longer distance is available Cable CAT5 or CAT6, direct or cross cable
LEDs Connection status
data sending & receiving
Part Number Configurator
MCLN1-XXX-XXX-B
S: Single-mode Power Adapter Type
M: Multimode A: US
B: UK
C: Euro
No of fibers : 1 ~ 2(*) E: Australian
F: China
N: 2U Chassis Card
or No PSU
A: Transceiver A End
B: Transceiver B End
N: NA S: ST Connector
F: FC Connector
C: SC Connector
W: Wall Mount
D: DIN Rail
A: 2U Chassis Card
*: For two fibers,both ends are same , that is MCLN1-X2N-XXX-B
Dimension
LxWxH 94mm x 74mm x 33 mm
1. Transmission distance is limited by optical loss of the total fiber connection and fiber dispersion (fiber bandwidth).
2. Please select the power plug type when placing order.
3. Please select the fiber connector when placing order.
4. Power lines are crimped and fitted to screw block connector in factory.
Due to ongoing technological improvements, product specifications are subject to change without notice. KBC is not liable for any
errors, omissions or changes of any description of the goods contained herein. This information is for the sole purpose of identifying
the products and KBC makes no warranty that the products conform to any description contained herein. Do not rely solely on any
representations, statements, or assertions concerning these Products contained herein.
www.kbcnetworks.com
