Scribd
Upload
240 views2 pages

Motion Connect 800plus: 6FX8002-2CA31-1AG0

This document provides technical specifications for the MOTION CONNECT 800PLUS motion control cable. Key details include: - The cable has an outer diameter of 9.8mm, minimum bending radius of 4x the diameter for fixed installation and 70mm for flexible installation. - It can operate at ambient temperatures between -50°C to 80°C when permanently installed, and -20°C to 60°C when moving. - The cable has an incremental encoder that outputs 2048 pulses per revolution and is 6m in length.

Uploaded by

Hugo Menéndez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
240 views2 pages

Motion Connect 800plus: 6FX8002-2CA31-1AG0

This document provides technical specifications for the MOTION CONNECT 800PLUS motion control cable. Key details include: - The cable has an outer diameter of 9.8mm, minimum bending radius of 4x the diameter for fixed installation and 70mm for flexible installation. - It can operate at ambient temperatures between -50°C to 80°C when permanently installed, and -20°C to 60°C when moving. - The cable has an incremental encoder that outputs 2048 pulses per revolution and is 6m in length.

Uploaded by

Hugo Menéndez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MOTION CONNECT 800PLUS

MLFB-Ordering data 6FX8002-2CA31-1AG0

Figure similar

Client order no. : Item no. :


Order no. : Consignment no. :
Offer no. : Project :
Remarks :

Electrical data

Incremental encoder sin/cos 1 Vpp 2048


Design of the sensor
pulses/rev with C and D track

Test voltage, rms Signal conductors 500 V

Rated voltage U0/U in accordance with EN 50395 Power conductors 30 V

Mechanical data

Type of connection cable engine side M23 full thread

Type of connection cable converter side SUB-D

Maximum cable outer diameter 9.8 mm

Smallest bending radius (fixed installation) 4 x Dmax

Smallest bending radius (flexible installation) 70 mm

Number of bends, max. 10,000,000

Maximum traversing velocity 300 m/min

Acceleration horizontal, max 50 m/s²

Tensile stress, max. Fixed installation 50 N/mm²

Tensile stress, max. Flexible installation 20 N/mm²

Torsional stress Absolute 30°/m

Length 6.0 m

Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Page 1 of 2 Generated Fri Oct 29 13:44:31 CEST 2021
MLFB-Ordering data 6FX8002-2CA31-1AG0

Figure similar

Technical data

Ambient temperature

Operation with permanently installed cable -50 ... 80 °C

Module-end power connector -40°C …


80°C, Motor-end power connector -20 …
80°C

Operation with moving cable -20 ... 60 °C

Storage -20 ... 80 °C

Module-end power connector -40°C …


80°C, Motor-end power connector -20 …
80°C

Kind of connection cable Basis cable

PUR, HD22.10 S2 (VDE 0282, part 10)


Material of the cable sheath
DESINA-color green RAL 6018

Without CFC and silicone IEC 60754-1/DIN


Type of insulation
VDE 0472-815

Standard for behavior in fire: flame resistance EN 60332-1-1 to 1-3

Oil resistance EN 60811-2-1

Verification of suitability as authorisation for USA UL758, cURus with AWM-Style

Verification of suitability as authorisation for Canada CSA-C22.2-N.210.2-M90

Technical data are subject to change! There may be discrepancies between calculated and rating plate values.
Page 2 of 2 Generated Fri Oct 29 13:44:31 CEST 2021

You might also like