Flow Meters
ATLUGB/E series are suitable for oil,chemical industry,metallurgy,heating power,spinning,
papermaking ,etc.
Be use of control: overheating vapor, saturation vapor, compressed air, ordinary air(oxygen, nitrogen, hydr
ogen,natural gas, coal gas,etc),water and liquid (water, petrol , alcohol, benzene ,etc.)
Precision :liquid +-1.0%FS
Gas and vapor: +-1.0%FS or +-1.5%FS
Range of medium temperature:-25centigrade to +350C
Ambient temperature: -25centigrade to +70C
Power :analog output:18—45 VDC
Pulse output:14—30VDC
Working pressure:< 3.2Mpa
Explode-proof : BT4/Ex ib I
Spectrum 25,40,50,80,100,150,200,250,300mm
Measuring medium Liquid, gas, vapor,steam
Normal temperature: -40° C~+80° C High temperature +280° C Maximum
Medium temperature
temperature +350° C
Medium pressure 1.0MPa, 1.6MPa, 2.5MPa… 4.0MPa
Intrinsic error Full tube type: ± 0.5%, ± 1.0%, ± 1.5% Plug-in type: ± 2.5%
Ratio of measurement
1: 10 1: 20 1: 30 1: 40
range
Range of flow speed Liquid(water): 0.25M/S~9.5M/S Gas: 4M/S~78M/S Vapor: 3M/S~78M/S
Full tube type: 15, 25, (32), 40, 50, (65), 80, 100, (125), 150, 200, 250, 300 Plug-
Caliber DN (mm)
in type: 300~3000
Reynolds number Re> 4000
Drag coefficient Full tube type: Cd ≤ 2.4, Plug-in type: Drag loss can be omitted
Degree of anti-explosion Intrinsic safety type: ia II T2~T5, Explosion-proof type: d II BT4
Ambient temperature Non anti-explosive area: -40° C~+55° C Anti-explosive area: -20° C~+55° C
DC supply +3.6V, +12V, +24V (Field data show the supply is +3.6V for 3 to 5 years)
Frequency impulse signal: 1~2600Hz, low level≤ 1V, high level≥ 5V, transmitter:
Output signal
two-wire system 4~20mA
Material 1Cr18Ni9Ti
Airtronics Sweden AB,Lavettvagen,174 59,Sudbyberg,Sweden. [email protected]