Inlet Elements
with limitation of primary pressure, LS compensated
flow control and solenoid operated unloading RE 18300-07
Edition: 02.2016
TE-07-__- Replaces: 07.2012
Technical data
General
TE-07-_ _- kg (lbs) 1.80 (3.98)
Ambient Temperature °C (°F) –20....+50 (-4....+122)
(NBR seals)
Hydraulic
Maximum pressure bar (psi) 250 (3625)
Maximum inlet flow l/min (gpm) 90 (23.8)
Rated flow at P1 l/min (gpm) 0-30 (0-7.9)
Hydraulic fluid Mineral oil based hydraulic
Description General properties: it must have fluids HL (DIN 51524 part 1).
The inlet elements TE-07-__ are employed to connect the physical lubricating and chemical Mineral oil based hydraulic
external P, T lines to the P, T channels inside the ED elements properties suitable for use in fluids HLP (DIN 51524 part 2).
hydraulic systems such as, for For use of environmentally
of the Directional Valve Assembly and to connect to the LS
example: acceptable fluids
ports of the elements equipped with LS channels. The main (vegetable or polyglycol
functions are: to provide LS controlled pressure compensated base) please consult us.
flow to the Directional Valve Elements, to limit the primary Fluid Temperature °C (°F) –20....+80 (-4....+176) (NBR)
pressure in the P channels and to unload to Tank the inlet flow Permissible degree of ISO 4572: βx≥75 X=10...12
when all hydraulic operations must be inhibited, by fluid contamination ISO 4406: class 19/17/14
NAS 1638: class 8
de-energizing the VEI solenoid operated cartridge.
Viscosity range mm2/s 5....420
They are available in two versions: TE-07-01-03-… suitable for
fixed displacement pumps, and TE-07-02-03-… for variable
displacement pumps. The TE-07-__ inlet elements are Note
manufactured with body made of Black Anodized Aluminium For applications with different specifications consult us
(AL). Port sizes are G 1/2, with LS and M test points G1/4.
NOTE: the mechanical locking of the 3-way pressure
compensator can be supplied upon request.
RE 18300-07/02.2016, Bosch Rexroth AG
2 TE-07-__- | Inlet Elements
Ordering details
Ordering details Symbol
TE-07-01-03 Open center, Open/Closed center
01 02 03 04 05 06 07 08 09 10
M LS
TE - 07 - - 03 - - - - - -
P P1
Family
01 Inlet Elements TE
Configuration
02 with limitation of primary pressure, LS compensated
07
flow control and solenoid operated unloading
Application Scheme
03 For open center or open/closed center 01 T
For closed center 02
TE-07-02-03 Closed center
Ports
04 G 1/2 DIN 3852 03 M LS
Pressure Relief range
P P1
05 50-210bar (725-3046 psi) 01
100-250bar (1450-3626 psi) 02
Restrictor adjustment
06 Flow restrictor with screw type adjustment S
Flow restrictor with hand-knob adjustment K
3-way compensator type
T
07 Without mechanical blocking 00
1)
With mechanical blocking 01
Cartridge voltage supply
08 No cartridge No
code
Characteristic curves
Cartridge without coil 00
Pressure drop through compensator
12V DC OB
psi bar
24V DC OC
26V DC AC 350 25
Electric connections 280 20
Pressure p
09 No cartridge No 210 15
code
140 10
Without coils 00
70 5
With coils, without mating connector
01 0 0
DIN EN 175301-803 2)
0 20 40 60 80 100 l/min
With coils, with bi-directional diode, without mating
03
connector vertical Amp-Junior 0 3 6 9 12 15 18 21 24 27 gpm
With coils,with bi-directional diode, without mating Flow Q
07
connector DT04-2P
Options
10 No cartridge No
code
Standard 00
Push-button type manual override OP
Push and twist type manual override SG
1) Necessary for open/closed center configuration.
2) For connectors ordering code see data sheet RE 18325-90.
Bosch Rexroth AG., RE 18300-07/02.2016
Dimensions [mm (inches)]
Inlet Elements | TE-07-__- 3
External dimensions and fittings
External dimensions and fittings
)
)
)
( )
(
(
)
( )
( ) ( )
(
( )
( )
( ) ( )
)
)
( )
(
(
)
)
)
)
)
(
(
(
(
(
)
)
)
)
)
(
(
(
(
(
( ) ( ) ( ) ( )
( ) ( ) ( )
( )
)
)
)
( ) ( )
)
(
(
(
( )
)
( ) ( )
(
1 Flange specifications for coupling to the ED Directional Valve 6 Pressure relief cartridge VS-5-C.
Elements. 7 Cavity for Solenoid Cartridge, VEI type.
2 For tie rod and tightening torque information see data sheet 8 Hydraulic Ports P-T G 1/2.
RE 18301-90. 9 G 1/4 ports for pressure gauge connection and LS signal.
3 Flow restrictor with hand-knob adjustment. 10 Overall dimension, including compensator,
4 Flow restrictor with screw type adjustment. for TE-07-__-03-__-_-01.
5 Plug G 1/4 for version TE-07-01-03-…
RE 18300-07/02.2016, Bosch Rexroth AG
4 TE-07-__- | Inlet Elements
Bosch Rexroth Oil Control S.p.A. © This document, as well as the data, specifications and other information
Oleodinamica LC Division set forth in it, are the exclusive property of Bosch Rexroth Oil Control S.p.a..
Via Artigianale Sedrio, 12 It may not be reproduced or given to third parties without its consent.
42030 Vezzano sul Crostolo The data specified above only serve to describe the product. No statements
Reggio Emilia - Italy concerning a certain condition or suitability for a certain application can be
Tel. +39 0522 601 801 derived from our information. The information given does not release the
Fax +39 0522 606 226 / 601 802 user from the obligation of own judgment and verification. It must be
[email protected] remembered that our products are subject to a natural process of wear and
www.boschrexroth.com/compacthydraulics aging.
Subject to change.
Bosch Rexroth AG, RE 18300-07/02.2016
