WELCOME TO
PRESENTATION
ARTIFICIAL INTELLIGENCE
CONTROLLED
SMART ROOM
PRESENTED TO –
TAHSEEN ASMA MEEM
PRESENTED BY
NAME ID
• 1. MD Nayem Khan 18-38193-2
• 2. Khan,Tahir Azad 18-37901-2
• 3. Chakraborty,Saptak 18-37243-1
• 4. Shahriar Ahmed 18-36926-1
• 5. Alamin Shumon 18-38222-2
• 6. Baidya Samson P. 18-37649-1
• 7. Jumo, kazi shanzida 17-34318-1
• 8. Mohammed Aftahi Islam 17-34454-2
• 9. Farhana Anwar Hossain 17-34666-2
WHAT IS ‘SMART ROOM!’
• Smart room
• Technology
• Intelligently
• Ultimate
• Automating
• Efficiency
• Connect
• Communicate
MAIN PURPOSE
• To get rid of from irregular lighting.
• To keep oneself away from excessive
noise.
• To maintain a normal temperature.
• To detect air condition and notifying
with suggestion.
LITERATURE REVIEW -
• 1.Regulation, maintenance, and synchronization
• 2. Monitoring wide range of sensors
• 3. Analyzing the building blocks of smart houses through an exhaustive study.
• 4. The production of automatic processes that can use case-based logic to make decisions.
• 5. Providing almost all automated processes by decision making AI
• 6. Trained in calculating temperature, humidity, light, and motion, and supporting voice command
by device.
• 7. Decoding the voice command of the users and deriving the precise interpretation of its
command.
• 8. Speeding up control and tracking activities by smart devices.
Component Details
Sound Sensor:
• Detects the intensity of sound and coverts into electric signal
• Consist of microphone, peak detector and amplifier
• capable to determine noise levels within decibels at 3 kHz 6 kHz frequencies
Luminance Sensor: Sound Sensor
• Luminance Sensor detects the intensity of the ambient light on a surface area
• Converts light energy into electricity
• It is used for brightness control of light depending on day/night
Buzzer:
• Used for signaling high intensity of sound around the place
• It makes sound through vibration
Buzzer
Component Details
Arduino UNO:
• An electronics platform based on easy-to-use hardware and software
• Capable of reads inputs from light sensors, gas sensors, temperature sensors etc.
• Control the board by sending set of instructions.
Arduino UNO
DHT11:
• Used instead of gas sensor
• Detects Temperature and Gas Density(actually measures Humidity)
• It will help to determine when the AC or Fan will be turned on/off
DHT11
DC motor:
• Two DC moto were used to control the speed of Fan and also for AC
• Works by turning electricity into motion
• One is for running the AC and another is for running the Fan
CIRCUIT DESIGN
PROJECT WORKFLOW
PROJECT WORKFLOW
RESULT
PROJECT FINANCE
The cost of a smart room greatly depend on how “ SMART” you really want it
ADVANTAGES
• Energy efficient.
• Hands-free
• Enhanced life security.
• Save time with automated tasks.
• Easy to use
• Cost efficient
DISADVANTAGES
•Configuration
•Maintenance
•Unsuitable
•Damage
LIFE SAVING TECHNOLOGY
Quality
Harmful Gas
Alarm
Save themselves
ENVIRONMENTAL IMPACT
Engineering on Society:
#Positive impact:Simply
automated doing task
#Negative impact:Human
interaction and Psychological
issue.
CONCLUSION
• Keeping in mind that technology is rapidly changing, we can use
modern technology for the betterment of our life and for that AI
controlled Smart Room is a great choice. As this device is energy
and cost efficient, it will be very much helpful for Bangladeshi
people to take them into next stage of technological life. Many
country can provide similar type of features with a higher cost
whereas our device is providing all these features with lower cost. In
a nutshell, we believe and say that AI controlled Smart Room is a
must component for the future human kind.
REFERENCES: -
1. HOME AUTOMATION USING ARTIFICIAL INTELLIGENCE. (2018). INTERNATIONAL JOURNAL OF RECENT TRENDS IN
ENGINEERING AND RESEARCH, 4(3), 780-784. DOI:10.23883/IJRTER.2018.4206.PD8PQ
2. D. H. STEFANOV, ZEUNGNAM BIEN AND WON-CHUL BANG, "THE SMART HOUSE FOR OLDER PERSONS AND PERSONS WITH
PHYSICAL DISABILITIES: STRUCTURE, TECHNOLOGY ARRANGEMENTS, AND PERSPECTIVES," IN IEEE TRANSACTIONS ON
NEURAL SYSTEMS AND REHABILITATION ENGINEERING, VOL. 12, NO. 2, PP. 228-250, JUNE 2004, DOI:
10.1109/TNSRE.2004.828423.
3. PRABHU, V., JENA, J., RODE, S., & PATHARI, P. (2018). HOME AUTOMATION USING ARTIFICIAL
INTELLIGENCE. INTERNATIONAL JOURNAL OF RECENT TRENDS IN ENGINEERING AND RESEARCH, 4(3), 780-784.
DOI:10.23883/IJRTER.2018.4206.PD8PQ
4. MALIK, N., & BODWADE, Y. (2017). LITERATURE REVIEW ON HOME AUTOMATION SYSTEM. IJARCCE, 6(3),
733-737. DOI:10.17148/IJARCCE.2017.63173
5. KUMAR, S., & QADEER, M. A. (2012). APPLICATION OF AI IN HOME AUTOMATION. INTERNATIONAL JOURNAL
OF ENGINEERING AND TECHNOLOGY, 4(6), 803-807. DOI:10.7763/IJET.2012.V4.488
6. SFIKAS, G., AKASIADIS, C., & SPYROU, E. (N.D.). CREATING A SMART ROOM USING AN IOT APPROACH.
RESEARCHGATE.NET.
7. BINGOL, O., TASDELEN, K., KESKIN, Z., & KOCATURK, Y. E. (2014). WEB-BASED SMART HOME AUTOMATION:
PL CCONTROLLED IMPLEMENTATION. RESEARCHGATE.NET, 11(3).
8. SHAWKI, F., DESSOUKI, M. E., ELBASIOUNY, A., ALMAZROUI, A., & ALBELADI, F. (JUNE-2015).
MICROCONTROLLER BASED SMART HOME WITH SECURITY USING GSM TECHNOLOGY. INTERNATIONAL
JOURNAL OF RESEARCH IN ENGINEERING AND TECHNOLOGY, 04(06).
