Scribd
Upload
138 views4 pages

Job Sheet UKK 2021 - JOB 3

This document contains diagrams and descriptions of the input-output (I/O) configuration and wiring for a PLC-based control system using an Omron CP1E PLC to control a motor with forward and reverse directions. The system uses push buttons and relays to control the direction and status of the motor based on ladder logic programmed into the PLC. Power is supplied from 220VAC mains power to a 24VDC power supply providing inputs and outputs to the PLC and relays controlling contactors that switch the motor's direction.

Uploaded by

Aji Safari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views4 pages

Job Sheet UKK 2021 - JOB 3

This document contains diagrams and descriptions of the input-output (I/O) configuration and wiring for a PLC-based control system using an Omron CP1E PLC to control a motor with forward and reverse directions. The system uses push buttons and relays to control the direction and status of the motor based on ladder logic programmed into the PLC. Power is supplied from 220VAC mains power to a 24VDC power supply providing inputs and outputs to the PLC and relays controlling contactors that switch the motor's direction.

Uploaded by

Aji Safari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

RANGKAIAN INPUT-OUTPUT (I/O) PLC OMRON CP1E

PB 1

PB 2

PB 2
220VAC

L1 L2/N COM 00 01 02 03 04 05 06 07 08 09 10 11

PLC OMRON CP1E


E-20 SDR-A
24VDC Keterangan:
220VAC = Sumber tegangan AC
+ - COM 00 COM 01 COM 02 03 COM 04 05 06 07 08 PB 1 = Push Button 1
PB 2 = Push Button 2
PB 3 = Push Button 3
14 14 R1 = Relay 24VDC (Forward)
R2 = Relay 24VDC (Reverse)
R1 R2 Catatan:
13 13 PLC Omron CP1E
TIDAK MEMPUNYAI
sumber 24VDC internal!
Gambar sumber 24VDC
di samping hanya sebagai ilustrasi /
acuan pengawatan
I/O PLC dengan sumber 24VDC /
Power Supply eksternal

INSTALASI KONTROL BERBASIS PLC: KET: UKK TITL 2021


2 ARAH PUTARAN / REVERSE-FORWARD (R-F)
A4 NO: 3.1
SMK TEKNOLOGI MANDIRI SKL: DIG:
GARUT DIP: DIS: JOB: 3
RANGKAIAN KONTROL

Keterangan:
L-N = Sumber Tegangan
F2 = MCB 1F 2P
ES = Emergency Stop
F3-F4 = Thermal Overload Relay
PLC = Programmable Logic Controller
PSU = Power Supply Unit (eksternal)
R1-R2 = Relay 24VDC
K1-K2 = Kontaktor Magnet
H1 = Lampu 1 (Forward) - Merah
H2 = Lampu 2 (Reverse) - Hijau
H3 = Lampu 3 (Gangguan) - Kuning

INSTALASI KONTROL BERBASIS PLC: KET: UKK TITL 2021


2 ARAH PUTARAN / REVERSE-FORWARD (R-F)
A4 NO: 3.2
SMK TEKNOLOGI MANDIRI SKL: DIG:
GARUT DIP: DIS: JOB: 3
RANGKAIAN POWER

Keterangan:
L1-L2-L3 = Sumber Tegangan 3 fasa
PE = Protection Earth (Grounding)
Q = ELCB
F1 = MCB 3F
K1-K2 = Kontaktor Magnet
F3-F4 = Thermal Overload Relay (TOR)
M = Motor listrik 3 fasa

INSTALASI KONTROL BERBASIS PLC: KET: UKK TITL 2021


2 ARAH PUTARAN / REVERSE-FORWARD (R-F)
A4 NO: 3.3
SMK TEKNOLOGI MANDIRI SKL: DIG:
GARUT DIP: DIS: JOB: 3
DIAGRAM LADDER

TABEL I/O
BIT I/O PERALATAN I/O

0.00 PB 1 – Stop
0.01 PB 2 – Start 1 (F)
0.02 PB 3 – Start 2 (R)
100.00 Forward
100.01 Reverse

INSTALASI KONTROL BERBASIS PLC: KET: UKK TITL 2021


2 ARAH PUTARAN / REVERSE-FORWARD (R-F)
A4 NO: 3.4
SMK TEKNOLOGI MANDIRI SKL: DIG:
GARUT DIP: DIS: JOB: 3

You might also like