LAST UPDATED 072020

OWEN OIL T OOL S

OWEN OIL T OOL S

Calgary
CANADA
403.571.2400
UNITED STATES
Bakersfield, California 661. 637.1380 Bridge Plugs Operations
Fruita, Colorado 970. 858.1850
Estevan 306.636.6936 Bridge Plug operations are used to isolate sections of the wellbore. Owen offers
Grande Prairie 780.539.0506 Godley, Texas 817.551.0540
a wide range of plugs to cover many typical completion and abandonment
Lloydminster 780.871.0670 Houma, Louisiana 985. 868.7010
scenarios.
Red Deer 403.340.1017 Houston, Texas 713.328.2673

Standard 403.644.3901 Marshall, Texas 903. 471.3680

Odessa, Texas 432. 385.7484

Aberdeen, Scotland 44.1224.421.133 Oklahoma City, Oklahoma 405. 495.4441

Abu Dhabi, UAE 971.2.551.5559 Punxsutawney, Pennsylvania 724. 286.9131

Adelaide, Australia 61.8.8152.0244 Snyder, Texas 325. 573.9580

Balikpapan, Indonesia 62.542.852.6551 Victoria, Texas 361. 576.6083

Beijing, China 86.10.8458.0125 Williston, North Dakota 701. 577.6936

Bogota, Columbia 57.3134506927

Kuala Lumpur, Malaysia 60.35.031.0088
Limehillock, Scotland 44.146.629.5222
Songkhla, Thailand 66.74.334.070
Tangerang, Indonesia 62.21.8062.3777

International customers please be sure to add the USA country code (+1) when
calling to the numbers listed above. Shipping is available to most international
locations from our USA Headquarters.

From our global network of Owen Oil Tools facilities, we provide

perforating gun systems, pipe recovery systems and auxiliary
equipment that can be conveyed into the well bore by any
method available to provide our customers with solutions for
their well intervention problems.

We do more than simply provide a commodity. We provide a

“Best in Class” product line and back the product with unrivaled
technical support and training where required. We also endeavor
to assist our clients with choosing the Owen Oil Tools product
that best fits their particular needs. This is a rarity in today’s
“one size fits all” marketplace.

©2013-2020 Owen Oil Tools LP. All Rights Reserved.

Owen Oil Tools LP. is a subsidiary of Core Laboratories,
12001 County Road 1000, Godley, TX 76044
TEL: 1.800.333.6936 • www.corelab.com/owen
 PREMIUM & ECONO BRIDGE PLUGS
Plug Premium Econo DIMENSIONAL DATA (inches)
OD Part No. Part No. A B C D E F G

OWEN OIL T OOL S

1.71 PLG-1710-001 1.71 .63 .81 1.09 N/A N/A 7.88
2.10 PLG-2100-001 2.10 1.06 1.00 1.25 .38 7.36 9.00
2.16 PLG-2160-001 2.16 1.06 1.00 1.25 .38 7.36 9.00
2.50 PLG-2500-001 2.50 1.125 1.06 1.50 .63 10.24 12.13
2.75 PLG-2750-001 2.75 1.06 1.31 1.50 .63 10.24 12.13
3.12 PLG-3120-001 3.12 1.25 1.44 1.87 .75 10.78 13.25
3.50 PLG-3500-001 PLG-3500-003 3.50 1.25 1.63 2.12 1.10 13.56 14.81
3.71 PLG-3710-001 3.71 1.25 1.63 2.12 1.10 13.56 14.81
4.24 PLG-4240-001 PLG-4240-003 4.24 1.38 1.63 2.75 1.10 13.56 14.81
4.75 PLG-4750-001 4.75 1.38 1.94 3.00 1.34 14.95 16.03
5.34 PLG-5340-001 5.34 1.63 2.13 3.68 2.38 17.25 19.00
5.61 PLG-5610-001 PLG-5610-003 5.61 1.63 2.19 3.68 2.38 17.25 19.00
6.09 PLG-6090-001 6.09 1.63 2.38 4.12 2.00 19.07 20.75
6.96 PLG-6960-001 6.96 1.63 2.75 4.62 2.50 21.40 22.88
7.71 PLG-7710-001 7.71 1.75 2.88 5.12 3.25 21.81 24.03

Notes:

Owen Oil Tools

P.O. Box 568, 12001 County Road 1000, Godley, Texas 76044
P. 800.333.6936 - www.corelab.com/owen

PERFORATING SOLUTIONS
 MAGNA RANGE BRIDGE PLUGS OWEN SETTING ADAPTERS
Magna Range Plug Setting
Wireline Setting Fuse
Part No. Max. Range Setting Sleeve Setting Nut Adapter Rod
Tool (O.D. & Type) (lbs)

OWEN OIL T OOL S

(Nitrile Packing*) O.D. Min./Max.
PLG-1500-001 1.500 1.610 1.995 1.5” O.D. Owen Shorty SET-5302-015 8,000
PLG-1750-001 1.750 1.905 2.441 1.687” O.D. M.S.S.T. PREMIUM Bridge Plug Wireline Set/Drillable
SET-5304-011
PLG-1900-001 1.906 2.156 2.765 1.687” O.D. Owen Shorty • Electric wireline set with either Go or Baker setting tools
PLG-2180-001 2.187 2.375 3.000 1.687” O.D. M.S.S.T.
SET-5304-018 13,000 • Designed for high pressure and rapid drill-out
(1.687” M.S.S.T.)
Not Required • Can be set in casing grades up to P-110
SET-5306-014
PLG-2280-001 2.281 2.441 3.343 2.125” O.D. M.S.S.T.
(2.125” M.S.S.T.) Not Required • Tested up to 10,000 psi
PLG-2500-101 2.500 2.875 3.500 • Standard plugs are fitted with Nitrile which have an tempature rating up to 275˚F
PLG-2750-101 2.750 3.187 3.920 2.125” O.D. M.S.S.T. SET-2125-030 25,000 • Various other elements can be supplied to meet Well bore fluids and temperatures
PLG-3000-101 3.000 3.437 4.154   - HSN, Viton and Aflas elements are available 
2.125” O.D. M.S.S.T. SET-2125-035 SET-2125-036 • Contact your nearest Owen Oil Tool representative for guidance
PLG-3250-101 3.250 3.920 4.276 27,000
3.25” O.D. M.S.S.T. SET-3250-098 SET-3250-099
3.625” O.D.
PLG-4060-101 4.062 4.154 5.044 SET-5307-090 SET-5307-079 SET-5303-093 30,000
Owen Compact
*Also available with VITON or AFLAS packing
“The only plug system offered in the
industry, is offered by Owen Oil Tools”
MAGNA RANGE BRIDGE PLUGS
DIMENSIONAL DATA (inches)
Bridge
Plug Size After Set
A B C D E F
G
1.500 1.40 .625 1.468 .625 .56 .88 11.88 ECONO Bridge Plug
1.750 1.70 1.093 1.750 .750 7.00 7.50 20.50 • Electric wireline set
1.906 1.70 1.093 1.906 .750 7.00 7.50 21.88 • Sets in any grade casing - including P-110
2.187 2.00 1.250 2.187 .750 7.25 7.71 21.71 • Rated to 7,500 psi at 200°F
2.281 2.00 1.250 2.281 .750 7.25 8.00 22.56 • Can be set on any wireline pressure setting tool
2.500 2.50 1.250 2.500 1.25 2.56 2.56 17.25 • Drillable cast iron construction
2.750 2.75 1.250 2.750 1.25 2.56 2.56 17.25
3.000 3.00 1.250 3.000 1.25 2.63 2.63 17.25 ‘MAGNA RANGE’ Bridge Plug
3.250 3.25 1.500 3.250 1.50 1.68 1.68 15.88 • Designed to pass through restricted I.D. tubing and set securely in the
4.062 4.06 2.750 4.062 2.50 2.78 3.53 20.84 larger tubing or casing I.D. below
Not all Magna Range Bridge Plugs assume this design shape • One step performance saves time and money
• Not all Magna Range Bridge Plugs assume this design shape
ATTENTION: Use only the setting tools listed above to set Magna Range Bridge Plugs.
When two setting tool sizes are listed always use the larger O.D. tool whenever possible.
Type ‘A’ Wireline Set Millable Frac Plug
All Magna Range Bridge Plugs should have cement placed on top before further operations • Compact unit designed expressly for multi-zone fracturing of gas wells
are performed in the well.
• Shear screw setting design allows for the frac ball to be run in place
• The bottom is notched to allow lower zone gas flow, even when frac ball
Notes:
from a previously set lower plug has flowed up to the bottom of plug
• Rated to 6,000 psi

PERFORATING SOLUTIONS
Bridge Plugs Operations

OWEN OIL T OOL S

PREMIUM BRIDGE PLUGS Go type Setting Tools Baker type Setting Tools
Casing Bridge Plug Part Plug Setting Range Setting Force Setting Setting Force
Setting Tool Setting Sleeve Setting Nut Adapter Rod Setting Sleeve Setting Nut Adapter Rod Lock Spring
O.D. Wt. (T&C) No. O.D. Min Max (lbs.) Tool (lbs.)
2.375 3.3-5.9 PLG-1710-00* 1.71 1.867 2.107 SET-5304-011 SET-05E4-050
1.687” O.D.
2.875 6.4-7.9 PLG-2100-00* 2.10 2.280 2.441 SET-5304-018
SET-05E4-052
2.875 6.4-6.5 PLG-2160-00* 2.16 2.280 2.563 2.125” O.D. SET-5306-014
13,000 No. 05 7,000 SET-05E4-051
1.687” O.D. SET-1687-035 Not Required Not Required
9.2-12.9 PLG-2500-00* 2.50 2.750 2.992 SET-05E4-054
3.5 2.125” O.D. SET-2125-027
Not Required Not Required
5.7-10.2 PLG-2750-00* 2.75 2.867 3.258 1.687” O.D. SET-1687-030 SET-05E4-053
4 5.6-14 PLG-3120-00* 3.12 3.340 3.732 2.125” O.D. 20,000 SET-2125-028 20,000 SET-10E4-055 SET-10E4-056
9.5-15.1 PLG-3500-00* 3.5 3.826 4.090 SET-5307-220
4.5
9.5-13.5 SET-5303-010 SET-5307-078 SET-5307-165 SET-5307-201 SET-5307-201
PLG-3710-00* 3.71 3.920 4.56
5 11.5-21 No. 10 SET-5307-222
30,000 30,000
5.5 13-25 SET-5307-217
PLG-4240-00* 4.24 4.580 5.047 SET-5307-079 SET-5307-079
5.75 22.5-25 SET-5307-081
6 14-26 SET-5307-163
PLG-4750-00* 4.75 5.140 5.595 35,000 SET-5307-088 35,000 SET-5307-088
6.625 34 3.625” O.D.
6 10.5-12 3.500” O.D.
6.625 17-34 PLG-5340-00* 5.34 5.595 6.366 SET-5303-093 SET-5307-221 SET-5307-202
7 23-40
SET-5307-082 No. 20 SET-5307-167
6.625 17-22
PLG-5610-00* 5.61 5.989 6.655 55,000 SET-5307-088 55,000 SET-5307-080
7 17-35
7.625 20-39 PLG-6090-00* 6.09 6.625 7.263
8.625 24-49 PLG-6960-00* 6.96 7.511 8.248
SET-5307-084 SET-5307-215
9.625 29.3-53.5 PLG-7710-00* 7.71 8.435 9.063

Notes:

PERFORATING SOLUTIONS
 MAGNA RANGE BRIDGE PLUGS OWEN SETTING ADAPTERS
Magna Range Plug Setting
Wireline Setting Fuse
Part No. Max. Range Setting Sleeve Setting Nut Adapter Rod
Tool (O.D. & Type) (lbs)

OWEN OIL T OOL S

(Nitrile Packing*) O.D. Min./Max.
PLG-1500-001 1.500 1.610 1.995 1.5” O.D. Owen Shorty SET-5302-015 8,000
PLG-1750-001 1.750 1.905 2.441 1.687” O.D. M.S.S.T. PREMIUM Bridge Plug Wireline Set/Drillable
SET-5304-011
PLG-1900-001 1.906 2.156 2.765 1.687” O.D. Owen Shorty • Electric wireline set with either Go or Baker setting tools
PLG-2180-001 2.187 2.375 3.000 1.687” O.D. M.S.S.T.
SET-5304-018 13,000 • Designed for high pressure and rapid drill-out
(1.687” M.S.S.T.)
Not Required • Can be set in casing grades up to P-110
SET-5306-014
PLG-2280-001 2.281 2.441 3.343 2.125” O.D. M.S.S.T.
(2.125” M.S.S.T.) Not Required • Tested up to 10,000 psi
PLG-2500-101 2.500 2.875 3.500 • Standard plugs are fitted with Nitrile which have an tempature rating up to 275˚F
PLG-2750-101 2.750 3.187 3.920 2.125” O.D. M.S.S.T. SET-2125-030 25,000 • Various other elements can be supplied to meet Well bore fluids and temperatures
PLG-3000-101 3.000 3.437 4.154   - HSN, Viton and Aflas elements are available 
2.125” O.D. M.S.S.T. SET-2125-035 SET-2125-036 • Contact your nearest Owen Oil Tool representative for guidance
PLG-3250-101 3.250 3.920 4.276 27,000
3.25” O.D. M.S.S.T. SET-3250-098 SET-3250-099
3.625” O.D.
PLG-4060-101 4.062 4.154 5.044 SET-5307-090 SET-5307-079 SET-5303-093 30,000
Owen Compact
*Also available with VITON or AFLAS packing
“The only plug system offered in the
industry, is offered by Owen Oil Tools”
MAGNA RANGE BRIDGE PLUGS
DIMENSIONAL DATA (inches)
Bridge
Plug Size After Set
A B C D E F
G
1.500 1.40 .625 1.468 .625 .56 .88 11.88 ECONO Bridge Plug
1.750 1.70 1.093 1.750 .750 7.00 7.50 20.50 • Electric wireline set
1.906 1.70 1.093 1.906 .750 7.00 7.50 21.88 • Sets in any grade casing - including P-110
2.187 2.00 1.250 2.187 .750 7.25 7.71 21.71 • Rated to 7,500 psi at 200°F
2.281 2.00 1.250 2.281 .750 7.25 8.00 22.56 • Can be set on any wireline pressure setting tool
2.500 2.50 1.250 2.500 1.25 2.56 2.56 17.25 • Drillable cast iron construction
2.750 2.75 1.250 2.750 1.25 2.56 2.56 17.25
3.000 3.00 1.250 3.000 1.25 2.63 2.63 17.25 ‘MAGNA RANGE’ Bridge Plug
3.250 3.25 1.500 3.250 1.50 1.68 1.68 15.88 • Designed to pass through restricted I.D. tubing and set securely in the
4.062 4.06 2.750 4.062 2.50 2.78 3.53 20.84 larger tubing or casing I.D. below
Not all Magna Range Bridge Plugs assume this design shape • One step performance saves time and money
• Not all Magna Range Bridge Plugs assume this design shape
ATTENTION: Use only the setting tools listed above to set Magna Range Bridge Plugs.
When two setting tool sizes are listed always use the larger O.D. tool whenever possible.
Type ‘A’ Wireline Set Millable Frac Plug
All Magna Range Bridge Plugs should have cement placed on top before further operations • Compact unit designed expressly for multi-zone fracturing of gas wells
are performed in the well.
• Shear screw setting design allows for the frac ball to be run in place
• The bottom is notched to allow lower zone gas flow, even when frac ball
Notes:
from a previously set lower plug has flowed up to the bottom of plug
• Rated to 6,000 psi

PERFORATING SOLUTIONS
 PREMIUM & ECONO BRIDGE PLUGS
Plug Premium Econo DIMENSIONAL DATA (inches)
OD Part No. Part No. A B C D E F G

OWEN OIL T OOL S

1.71 PLG-1710-001 1.71 .63 .81 1.09 N/A N/A 7.88
2.10 PLG-2100-001 2.10 1.06 1.00 1.25 .38 7.36 9.00
2.16 PLG-2160-001 2.16 1.06 1.00 1.25 .38 7.36 9.00
2.50 PLG-2500-001 2.50 1.125 1.06 1.50 .63 10.24 12.13
2.75 PLG-2750-001 2.75 1.06 1.31 1.50 .63 10.24 12.13
3.12 PLG-3120-001 3.12 1.25 1.44 1.87 .75 10.78 13.25
3.50 PLG-3500-001 PLG-3500-003 3.50 1.25 1.63 2.12 1.10 13.56 14.81
3.71 PLG-3710-001 3.71 1.25 1.63 2.12 1.10 13.56 14.81
4.24 PLG-4240-001 PLG-4240-003 4.24 1.38 1.63 2.75 1.10 13.56 14.81
4.75 PLG-4750-001 4.75 1.38 1.94 3.00 1.34 14.95 16.03
5.34 PLG-5340-001 5.34 1.63 2.13 3.68 2.38 17.25 19.00
5.61 PLG-5610-001 PLG-5610-003 5.61 1.63 2.19 3.68 2.38 17.25 19.00
6.09 PLG-6090-001 6.09 1.63 2.38 4.12 2.00 19.07 20.75
6.96 PLG-6960-001 6.96 1.63 2.75 4.62 2.50 21.40 22.88
7.71 PLG-7710-001 7.71 1.75 2.88 5.12 3.25 21.81 24.03

Notes:

Owen Oil Tools

P.O. Box 568, 12001 County Road 1000, Godley, Texas 76044
P. 800.333.6936 - www.corelab.com/owen

PERFORATING SOLUTIONS
 LAST UPDATED 072020
OWEN OIL T OOL S

OWEN OIL T OOL S

Calgary
CANADA
403.571.2400
UNITED STATES
Bakersfield, California 661. 637.1380 Bridge Plugs Operations
Fruita, Colorado 970. 858.1850
Estevan 306.636.6936 Bridge Plug operations are used to isolate sections of the wellbore. Owen offers
Grande Prairie 780.539.0506 Godley, Texas 817.551.0540
a wide range of plugs to cover many typical completion and abandonment
Lloydminster 780.871.0670 Houma, Louisiana 985. 868.7010
scenarios.
Red Deer 403.340.1017 Houston, Texas 713.328.2673

Standard 403.644.3901 Marshall, Texas 903. 471.3680

Odessa, Texas 432. 385.7484

Aberdeen, Scotland 44.1224.421.133 Oklahoma City, Oklahoma 405. 495.4441

Abu Dhabi, UAE 971.2.551.5559 Punxsutawney, Pennsylvania 724. 286.9131

Adelaide, Australia 61.8.8152.0244 Snyder, Texas 325. 573.9580

Balikpapan, Indonesia 62.542.852.6551 Victoria, Texas 361. 576.6083

Beijing, China 86.10.8458.0125 Williston, North Dakota 701. 577.6936

Bogota, Columbia 57.3134506927

Kuala Lumpur, Malaysia 60.35.031.0088
Limehillock, Scotland 44.146.629.5222
Songkhla, Thailand 66.74.334.070
Tangerang, Indonesia 62.21.8062.3777

International customers please be sure to add the USA country code (+1) when
calling to the numbers listed above. Shipping is available to most international
locations from our USA Headquarters.

From our global network of Owen Oil Tools facilities, we provide

perforating gun systems, pipe recovery systems and auxiliary
equipment that can be conveyed into the well bore by any
method available to provide our customers with solutions for
their well intervention problems.

We do more than simply provide a commodity. We provide a

“Best in Class” product line and back the product with unrivaled
technical support and training where required. We also endeavor
to assist our clients with choosing the Owen Oil Tools product
that best fits their particular needs. This is a rarity in today’s
“one size fits all” marketplace.

©2013-2020 Owen Oil Tools LP. All Rights Reserved.

Owen Oil Tools LP. is a subsidiary of Core Laboratories,
12001 County Road 1000, Godley, TX 76044
TEL: 1.800.333.6936 • www.corelab.com/owen