UA844plus SWB

Antenna Distribution System

The Shure UA844SWB antenna distribution system user guide.

Version: 4 (2019-H)
 Shure Incorporated

Table of Contents
Specifications 4
UA844plus SWBAntenna Distribution System 3 FRONT AND REAR PANELS 5

Connecting Multiple UA844 Systems 6

General Description 3

Model Variations 3 Certifications 6

Accessories 3 Important Product Information 7

System Components 3 LICENSING INFORMATION 7
Optional Accessories 3

2/7
 Shure Incorporated

UA844plus SWB
Antenna Distribution System

General Description
The Shure Model UA844+ is an antenna distribution system that allows for the expansion of wireless microphone systems by
splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results
from splitting signal power to multiple outputs. A single UA844+ system can support up to five wireless receivers. A maximum
of five UA844+ systems may be used in a two-tiered configuration.

Model Variations
UA844+ Model Variations
UA844+V 174-216 MHz

UA844+SWB 470-960 MHz

UA844+Z16 1240-1260 MHz

UA844+Z17 1492-1525 MHz

UA844+Z18 1785-1805 MHz

Note: Some units include a power switch on the front panel to meet regional regulations.

Accessories
System Components
• Front-mounting antenna hardware
• Rack-mounting hardware
• External power supply
• (2) 6 ft. BNC cables
• (4) Non-locking DC power cords (QLXD4, SLX4, BLX4R)
• (10) 22 in. BNC cables*
• (4) Locking DC power cords** (ULXD4)

*Model UA844+/LC substitutes (2) 22 in. BNC cables.

**Not included with Model UA844+/LC

Optional Accessories
1/2 Wave Omnidirectional Receiver Antenna for improved wireless signal reception UA8

3/7
 Shure Incorporated

In-Line RF Amplifier compensates for signal loss over extended cable runs UA834

UA874 Active Directional Antenna for improved wireless signal reception with
UA874
greater rejection of unwanted signals

1/2 Wave Antenna Remote Mount Kit UA505

Antenna Rack Panel with Cables and BNC Adapters UA440

Note: Be sure to select antennas and accessories that are compatible with the operating frequency range of your wireless system. Contact Shure or your local
retailer for help with selecting the right wireless accessories.

Selecting Antenna Cables

Use 50 ohm low-loss coaxial cable, such as RG-8U. Shure offers pre-terminated antenna cables ranging from 6 to 100 feet.

NOTE: When ordering cables from Shure, select the low-loss "Z" models (available for longer cables) when using frequency bands above 1000 MHz.

Specifications
Power Requirements
14 to 18  V DC

DC Output
14 to 18  V DC (x4)

Output Current
Combined total from all DC outputs

2.5 A, maximum

Operating Temperature Range

-18°C (0°F) to 63°C (145°F)

Dimensions
45 x 483 x 172  mm (H x W x D)

Net Weight
1.62  kg (3.6  lbs)

Connector Type
BNC

RF Frequency Range
model dependent

174 to 1805 MHz

Bias Voltage
15 V DC (150  mA, maximum) (x2)

4/7
 Shure Incorporated

Impedance
50  Ω

RF Frequency Range
model dependent

174 to 1805 MHz

Output Intercept Point

21 dBm, typical

Connector Type
BNC

Impedance
50 Ω

Output Connector Isolation

30 dB, typical

Gain
Input to any output port (Unused ports terminated in 50 Ω)

-1 to +1 dB

FRONT AND REAR PANELS

① Antenna A Connector
② Power Indicator
③ Power Switch(country dependent)
④ Antenna B Connector
⑤ 15 V dc (2.54 A) power input
⑥ Power Output for receivers. Do not connect to additional distribution systems
⑦ RF Input Antenna B
⑧ Cascade (2)
⑨ RF Output B
⑩ RF Output A
⑪ RF Input Antenna A

5/7
 Shure Incorporated

INSTALLATION

CABLE CONNECTIONS (ONE UA844)

Connecting Multiple UA844 Systems

① Connect additional systems to the A/B ports of the top level UA844.
② Connect additional systems on the second level to the A and B antenna inputs.
③ Connect each receiver (RX) to the A/B output port pairs on the UA844.

Rear panel connections for each level of RF and power distribution

Certifications
The CE Declaration of Conformity can be obtained from Shure Incorporated or any of its European representatives. For contact
information please visit www.shure.com
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
6/7
 Shure Incorporated

Fax: +49-7262-92 49 11 4
Email: [email protected]

Important Product Information

LICENSING INFORMATION
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for
possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to
operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability de­
pends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the 
appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.

NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of oper­
ating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and RF power
levels for wireless microphone products.

7/7