Scribd
Upload
130 views

GS Inverter Series8-12KW: Specifications

The document summarizes the specifications of the GS Inverter Series for 8-12KW models. It describes the key features and parameters including LCD display, MPPT solar charger, AC and DC inputs/outputs, charging options, protections, efficiencies, and dimensions. The specifications cover voltage and power ranges, charging currents, transfer times, temperatures, weights and more for each model.

Uploaded by

Dessire Williams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
130 views

GS Inverter Series8-12KW: Specifications

The document summarizes the specifications of the GS Inverter Series for 8-12KW models. It describes the key features and parameters including LCD display, MPPT solar charger, AC and DC inputs/outputs, charging options, protections, efficiencies, and dimensions. The specifications cover voltage and power ranges, charging currents, transfer times, temperatures, weights and more for each model.

Uploaded by

Dessire Williams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GS Inverter Series8-12KW

GS Series AC/Solar charging Off grid Hybrid Inverter.


LED/LCD display, Enhanced functions setting via LCD, Man-machine
intelligent design.
Built-in 40A/60A optional MPPT solar charger controller.
LCD shows the solar capacity.
5 stages adjustable AC charging current. AC charging also can be closed.
AC/DC priority modes can be set.
Generator restart signal. (Dry contact)
3 times peak power. Strong loading capacity.
Overload, output short-circuit protection.

Specifications
Model
GS8KW GS10KW GS12KW
Parameters
Nominal Power 8KW 10KW 12KW
Input Voltage Waveform Sinusoidal (utility or generator)
AC Nominal input Voltage 230Vac ±10%rms
Input Low Line Disconnect 184Vac±4%(Normal) or 135Vac±4%(Wide)
High Line Disconnect 263Vac±4%(Normal) or 263Vac±4%(Wide)
Max AC input Voltage Max 270Vac
Frequency 50Hz:41-54Hz, 60Hz:51-64Hz
Output Voltage Waveform Sine wave
AC
Power Factor 0.9~1.0
output
Nominal
Nominal Output
Output Voltage (V) 230Vac ±10%rms
Frequency (Hz) 50Hz ± 0.3Hz, 60Hz ± 0.3Hz
Rated Charge Current 60A
PV Inputopen
Max.PV Voltage range
circuit 60-110VDC
Solar array voltage 110VDC
charger Charger mode
PV Low Voltage MPPT
Re-connect
PV Low Voltage PV≥ Bat.V+3V
Disconnect PV≦Bat.V
Efficiency ≥ 97%
AC Nominal Charger 35A/50A/70A(According to the inverter model)
Charger Current 5 stages adjustable charging current
Over charge Protection Bat.V≥ 62.0VDC battery beeps 0.5s every 1s & fault after 60s
Efficiency(Battery Mode) ≥ 87%
Efficiency
Efficiency (Line Mode) ＞98%
Battery Nominal DC input Voltage 48VDC
Voltage Low Battery Alarm 42VDC±1.2VDC
High DC input
64VDC±1.2VDC
Alarm & Fault
Transfer
20ms(max)
Time 110%＜load＜150%，beeps 0.5s every 1s，and Fault after 60s off
Over-Load Protection the output，load＞150%，beeps 0.5s every 1s，and Fault after 20s
System Output Short Circuit
Current limit (Fault after 10s)
Parameter Protection
Surge Rating(10s) 1:3(VA)
Power Saver Load≤ 25W(Enabled on "P/S auto"Setting of Remote control)
Protections Low battery, over charging, over load, over temp
Operating Temperature
0℃ to 40℃
Range
Storage Temperature ﹣15℃～60℃
General Operation humidity 5% to 95%(non-condensing)
Specifications
Audible Noise 60dB max
cooling Forced air,variable speed fan
Dimension(L*W*H) 627*416*204mm
Net Weight(kg) 52.5 58.5 66.5

◆ Product specifications are subject to change without further notice

You might also like