TC4069UBP/UBF/UBFN/UBFT
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
TC4069UBP,TC4069UBF,TC4069UBFN,TC4069UBFT
TC4069UB Hex Inverter
Note: xxxFN (JEDEC SOP) is not available in
Japan.
TC4069UB contains six circuits of inverters. Since the internal
circuit is composed of a single stage inverter, this is suitable for TC4069UBP
the applications of CR oscillator circuits, crystal oscillator circuits
and linear amplifiers in addition to its application as inverters.
Because of one stage gate configuration, the propagation time
has been reduced.
Pin Assignment
TC4069UBF
I1 1 14 VDD
O1 2 13 I6
I2 3 12 O6
O2 4 11 I5
I3 5 10 O5
O3 6 9 I4
TC4069UBFN
VSS 7 8 O4
(top view)
Circuit Diagram
1/6 TC4069UB
VDD
TC4069UBFT
INPUT OUTPUT
Weight
DIP14-P-300-2.54 : 0.96 g (typ.)
VSS SOP14-P-300-1.27A : 0.18 g (typ.)
SOL14-P-150-1.27 : 0.12 g (typ.)
TSSOP14-P-0044-0.65A : 0.06 g (typ.)
1 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Absolute Maximum Ratings (Note)
Characteristics Symbol Rating Unit
DC supply voltage VDD VSS − 0.5 to VSS + 20 V
Input voltage VIN VSS − 0.5 to VDD + 0.5 V
Output voltage VOUT VSS − 0.5 to VDD + 0.5 V
DC input current IIN ±10 mA
Power dissipation PD 300 (DIP)/180 (SOIC) mW
Operating temperature range Topr −40 to 85 °C
Storage temperature range Tstg −65 to 150 °C
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or
even destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly
even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute
maximum ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Operating Ranges (VSS = 0 V) (Note)
Characteristics Symbol Test Condition Min Typ. Max Unit
DC supply voltage VDD ― 3 ― 18 V
Input voltage VIN ― 0 ― VDD V
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VDD or VSS.
2 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Static Electrical Characteristics (VSS = 0 V)
Test Condition −40°C 25°C 85°C
Characteristics Symbol VDD Unit
Min Max Min Typ. Max Min Max
(V)
5 4.95 ⎯ 4.95 5.00 ⎯ 4.95 ⎯
High-level |IOUT| < 1 μA
VOH 10 9.95 ⎯ 9.95 10.00 ⎯ 9.95 ⎯ V
output voltage VIN = VSS, VDD
15 14.95 ⎯ 14.95 15.00 ⎯ 14.95 ⎯
5 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05
Low-level |IOUT| < 1 μA
VOL 10 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05 V
output voltage VIN = VSS, VDD
15 ⎯ 0.05 ⎯ 0.00 0.05 ⎯ 0.05
VOH = 4.6 V 5 −0.61 ⎯ −0.51 −1.0 ⎯ −0.42 ⎯
VOH = 2.5 V 5 −2.50 ⎯ −2.10 −4.0 ⎯ −1.70 ⎯
Output high
IOH VOH = 9.5 V 10 −1.50 ⎯ −1.30 −2.2 ⎯ −1.10 ⎯ mA
current
VOH = 13.5 V 15 −4.00 ⎯ −3.40 −9.0 ⎯ −2.80 ⎯
VIN = VSS
VOL = 0.4 V 5 0.61 ⎯ 0.51 1.2 ⎯ 0.42 ⎯
Output low VOL = 0.5 V 10 1.50 ⎯ 1.30 3.2 ⎯ 1.10 ⎯
IOL mA
current VOL = 1.5 V 15 4.00 ⎯ 3.40 12.0 ⎯ 2.80 ⎯
VIN = VDD
VOUT = 0.5 V, 4.5 V 5 4.0 ⎯ 4.0 ⎯ ⎯ 4.0 ⎯
Input high VOUT = 1.0 V, 9.0 V 10 8.0 ⎯ 8.0 ⎯ ⎯ 8.0 ⎯
VIH mA
voltage VOUT = 1.5 V, 13.5 V 15 12.0 ⎯ 12.0 ⎯ ⎯ 12.0 ⎯
|IOUT| < 1 μA
VOUT = 0.5 V, 4.5 V 5 ⎯ 1.0 ⎯ ⎯ 1.0 ⎯ 1.0
Input low VOUT = 1.0 V, 9.0 V 10 ⎯ 2.0 ⎯ ⎯ 2.0 ⎯ 2.0
VIL mA
voltage VOUT = 1.5 V, 13.5 V 15 ⎯ 3.0 ⎯ ⎯ 3.0 ⎯ 3.0
|IOUT| < 1 μA
“H” 5
IIH VIL = 18 V 18 ⎯ 0.1 ⎯ 10− 0.1 ⎯ 1.0
Input level
μA
current “L”
5
IIL VIL = 0 V 18 ⎯ −0.1 ⎯ −10− −0.1 ⎯ −1.0
level
5 ⎯ 0.25 ⎯ 0.001 0.25 ⎯ 7.5
Quiescent VIN = VSS, VDD
IDD 10 ⎯ 0.50 ⎯ 0.001 0.50 ⎯ 15.0 μA
supply current
(Note)
15 ⎯ 1.00 ⎯ 0.002 1.00 ⎯ 30.0
Note: All valid input combinations.
3 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Dynamic Electrical Characteristics (Ta = 25°C, VSS = 0 V, CL = 50 pF)
Test Condition
Characteristics Symbol Min Typ. Max Unit
VDD (V)
5 ⎯ 70 200
Output transition time
tTLH ⎯ 10 ⎯ 35 100 ns
(low to high)
15 ⎯ 30 80
5 ⎯ 70 200
Output transition time
tTHL ⎯ 10 ⎯ 35 100 ns
(high to low)
15 ⎯ 30 80
5 ⎯ 55 110
Propagation delay time
tpLH ⎯ 10 ⎯ 30 60 ns
(low to high)
15 ⎯ 25 50
5 ⎯ 55 110
Propagation delay time
tpHL ⎯ 10 ⎯ 30 60 ns
(high to low)
15 ⎯ 25 50
Input capacitance CIN ⎯ ⎯ 7.5 15 pF
Waveform for Measurement of Dynamic Characteristics
20 ns 20 ns
90% 90%
Input 50% 50%
10% 10%
tpHL tpLH
Output
tTHL tTLH
4 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Package Dimensions
Weight: 0.96 g (typ.)
5 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Package Dimensions
Weight: 0.18 g (typ.)
6 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Package Dimensions (Note)
Note: This package is not available in Japan.
Weight: 0.12 g (typ.)
7 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
Package Dimensions
Weight: 0.06 g (typ.)
8 2007-10-01
TC4069UBP/UBF/UBFN/UBFT
RESTRICTIONS ON PRODUCT USE 20070701-EN GENERAL
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
9 2007-10-01
