Calibration

Tools & Software

 Ready-to-Use Calibration Solutions
Pump Systems Designed for Your Specific Requirements

A METEK offers a variety of solutions for

pressure generation and measurement. Our line
of products for pressure generation includes ev-
erything from small pneumatic hand pumps to a
precision, hydraulic pressure comparator capable of
generating up to 15 000 psi / 1000 bar / 100 MPa.

All of our pumps may be ordered as part of a

Pump System, complete with a Crystal Reference
Indicator and delivered in a sturdy carrying case
with custom insert.

Key Features & Options

 Easy to use fine adjustments.

 CPF Fittings and Hoses.

 Oil or water compatible.

 Wide pressure ranges.

 A Better Way to Calibrate
Automate Your Calibrations: 7 to 10 Times Faster than a Deadweight Tester

FastCalXP Software
 10 point up and down calibration in less than 3 minutes.

 Eliminates typing.

 Reduces calculation errors.

 Saves time on each calibration.

 Easy to use, fast to set up.

Download a free 30-day trial here 

Designed to Test
GaugeCalHP Comparator
 Pressure Gauges
 Generates pressure up to 15 000 psi.
 Transmitters
 Works with oil, water, or air. *
 Transducers
 Faster than any deadweight tester and most
automated pressure controllers.  Chart Recorders

 Use in a lab or out in the field.

Learn more here  ( *up to 400 inH 0 )

2
 Precision Calibration
GaugeCalHP is a self-contained, precision
Connection Fitting Relief Valve
hydraulic pressure comparator intended for the With easy alignment swivel capability.
No Mess Drip Tray
calibration of pressure gauges, transmitters, sensors, Captures fluid from bleeding the system.

and safety valves rated up to 15 000 psi / 1000 bar.

You may fill the comparator with your choice of Fine Adjust Pivot Manifold
Easy to use, even at 15000 psi. Manifold rotates for testing large size gauges.
water or oil.
Reservoir
Clear, removable reservoir with a fill line.
The GaugeCalHP is much faster than deadweight
testers and most automated pressure control-
lers; and it’s so quick and easy to use, it’s ideal for
calibrating those low cost gauges that are often Travel Indicator
Shows the amount of stroke available.
overlooked for ISO9000 compliance.
Pump System

Learn more here 

Brackets
For easy mounting to a table top.

Removable Handle Assembly

For transport. Includes captive screw.
 Portable Hand Pumps
Crystal Pressure Fittings are machined
T-600 Series is a lightweight and portable T-900 Series pneumatic pressure pump features in high-strength 316 Stainless Steel to
hydraulic hand pump, specially designed for high pres- an extended range fine adjust for precise control of operate with a 4:1 Safety Factor at 10 000 psi /700 bar. A
sure applications. A fine adjust allows precise control of pressure. A built-in relief valve and dual pressure output self-venting weep hole adds peace of mind, alerting you
pressure, while a vent valve provides quick and positive enable safe and simple operation. The T-965 and T-975 by leaking gas or test fluid before you fully disconnect
shut-off and pressure release. The pump is compatible are available with a button valve, making them capable from a pressurized system. Every pump and comparator
with petroleum-based oils or hydraulic fluids. of switching easily from pressure to vacuum generation. is available in a CPF Version.
Pump Systems  Pump Systems 

 Two outlet ports.  Lightweight, compact design.

2 Ways to Seal

 Large reservoir.  Two outlet ports.

 Easy-to-use fine adjust .  Adjustable stroke.

 Generates up to  Generates up to
5000 psi/350 bar. 580 psi /40 bar
and vacuum.
Learn more here  
CPF to CPF O-ring seal. CPF to non-CPF metal seal.
Learn more here   Finger-tight up to 10 000 psi. Use a wrench to create a seal.

Flexible, Lightweight Hose

0.08" [2 mm]

Minimum 1” (2.5cm) bend radius, Small inner hose diameter reduces

even under pressure. pumping effort and saves time.
 Bench-mount Pressure Sources
P014 hydraulic jack pump is designed for high pressure oil
applications. Its small size and light weight makes it a sensible,
Calibration Solutions for a Wide Range
rugged and portable pressure generating solution. of Industry Applications
Pump System 
AMETEK pressure measurement and calibration solutions
 Generates 10 000 psi/ 700 bar.
are in use every day across the globe in industries like
 Small, and light weight.
offshore oil drilling, oil and gas refineries and distribution,
 Easy-to-use fine adjust.
traditional and nuclear power generation, water supply
 Four pressure output manifold. and waste water treatment, manufacturing, aircraft main-

Learn more here   tenance, aerospace, marine, and food & beverage.

AMETEK reference indicators and pressure sources are

perfect for testing:

Pressure Gauges, Transmitters   
P018 hydraulic screw pump produces pressure with superior
control. The adjustable reference pressure port lets you set your Transducers, Flow Computers, Indicators,

reference gauge at the best viewing angle.   Pressure Relief Valves, Valve Positioners,
Pump Systems 
Converters (I-P, P-I), Volume Correctors,
 Generates 5000 psi/350 bar.
Leak Testing    Chart Recorders, and
 Easy-to-use fine adjust.
Pressure Switches.
 Adjustable reference port.

 Compatible with water or oil.

Learn more here  

 High Volume Pressure Source
T-Series is a high volume hydraulic comparator capable Fine Adjust
Use up to 3500 psi for fine adjustments.
of producing pressure up to 15 000 psi / 1000 bar. This unit is
ideal for testing and calibrating pressure gauges, relief valves,
and pressure switches. Pump Systems

 High and Low Volume Settings.

 Two outlet ports.

Manifold Assembly
 Large fluid capacity. Dual pressure port manifold.

 Fine Adjustment up to 3500 psi.

 Compatible with water or oil.

Valve Rod Selector
For rapid pressure increase at lower pressures
and easier pumping at higher pressures. Vent Valve
Learn more here 
Quickly relieve pressure and vent the system.

Reservoir Tube
High volume reservoir compatible with oil or water.
 Ordering Information
A ny Pump System may be ordered with or without a reference indicator. The table below provides an explanation of the Pump System
ordering scheme when ordering a system without an indicator. For details on ordering the Pump Systems with an indicator, see the indicator data sheet.

Reference Indicator Reference Indicator Included Pump System Liquid * Carrying Case **

nVision . . . . . . . . . . NV No . . . -NONE System A (T-960) . . . . . . . . . . . . . . . . . . . . . -AXX Full . . . . . . . (omit) Aluminum . . . . (omit)

30 Series . . . . . . . . . IS30 System A (T-970) . . . . . . . . . . . . . . . . . . . . . -AHX Drained. . . -E Waterproof . . . -W

XP2i . . . . . . . . . . . . . XP2I System B (T-965) . . . . . . . . . . . . . . . . . . . . . -BXX * Full is an option for Systems C, D, E, and H only. Drained is the only option for Systems F and G.
** The Waterproof Case is an option for Systems A, B, and C only. The Waterproof Case is the only option for Systems G and H.
m1. . . . . . . . . . . . . . . M1 System B (T-975) . . . . . . . . . . . . . . . . . . . . . -BHX

System C (T-620) . . . . . . . . . . . . . . . . . . . . . -CXX

Sample Part Numbers System C (T-620H) . . . . . . . . . . . . . . . . . . . -CHX

XP2I-NONE-AXX System D (P016 or P-018) . . . . . . . . . . . . . -DOX

System A (for XP2i) with an aluminum carrying case.
System D (P017 or P-018) . . . . . . . . . . . . . -DWX
NV-NONE-BXX-W System E (P014) . . . . . . . . . . . . . . . . . . . . . . -EXX
System B (for nVision) with a waterproof carrying case. 1 meter CPF Male Hose
System F (T-1) . . . . . . . . . . . . . . . . . . . . . . . . -FWB
Pack Tape
3KPSIXP2I-CXX
System G (GaugeCalHP–oil) . . . . . . . . . . -GOX CPF Fittings (NPT and BSP)
System C with a 3000 psi XP2i gauge in an aluminum case.
System G (GaugeCalHP–water) . . . . . . . -GWX
IS30-NONE-DOX
System D (for 30 Series) filled with oil. System H (T-620H and T-975) . . . . . . . . . -HOX

Shoulder Strap
NV-NONE-EXX-E
System E (for nVision) drained of fluid.

15KPSIXP2i-FWV-E
System F with a 15 000 psi XP2i gauge for use with water, drained. 1/4" Bonded Seals
System C
CPF Male Plug & CPF Female Cap Fittings
NV-NONE-GOX-E-W
Protective Vinyl Fitting Caps
System G (for an nVision) for use with oil, drained of fluid, in a waterproof case.
Red & Black Test Leads and Clips
IS30-NONE-HOX-E-W (Included only with Pump Systems for the 30 Series Calibrator)

System H (for 30 Series) drained of fluid, in a waterproof case.

 CrystalCalHP
Everything You Need
for Ultra-Fast, Error-Free
Dear Calibration Professional, Calibrations
You’re already familiar with the family of high quality AMETEK calibrators and pressure gauges.
Perhaps you even own one.
10-point up and down calibrations in under 3 minutes.
CrystalCalHP-PSI includes:
The same relentless pursuit of perfection invested in our gauges; and that spurred the design of CPF–
the industry’s safest test fitting line–also drives us to create top-quality pressure generation systems.
 One GaugeCalHP pressure comparator.
We know, just as you do, that the best calibrators are only as good as their support equipment.
 One copy of FastCalXP calibration software, with footswitch.
Our pumps and Pump Systems deliver exactly what you need for field and lab calibration: reference
indicators, fittings, hoses, and accessories, all packed inside sturdy and portable cases.  Three XP2i gauges with 0.1% of Reading accuracy.
From rugged and effective pumps, to the best fittings and hoses, to time-saving software–we’ve thought
 One Weatherproof carrying case.
of everything.

These are your tools for pressure calibration; the ones you use over and over, every day. Doesn’t it make  All the CPF fitting adapters you need.
sense to buy the best?
Eliminates typing and guesswork–
automatically generates
Working for you,
calibration reports.
The AMETEK Team
Learn more here…  

No part of this document may be reproduced or modified in any form or by any means, electronic or mechanical,
without express written permission from AMETEK Incorporated. ©2014 AMETEK Incorporated

4940.F