ALLIANCE Multi-Operator DAS
2W Low-Power Remote Optic Unit (N2ROU)
Product Specifications / Parts List
The ALLIANCE Release 6 platform is SOLiD’s The 2W N2ROU features:
multi-operator, neutral host Distributed • Up to 7 bands in one cabinet
Antenna System (DAS) that efficiently
delivers wireless RF signals into any indoor • Easy install, commissioning, and
or outdoor location difficult to cover with management
traditional macro networks. • Full 194MHz bandwidth support for
The Low-power 2W Remote Optic Unit 2500TDD
(N2ROU) can support up to seven commercial • Rugged construction: IP66 / NEMA 4
bands in one cabinet, each delivering 2W of certified
output power. An Add-on remote unit (AOR)
• Support for VHF/UHF with Add-on
is available for supporting VHF/UHF services.
remote unit
Version 2.1 – October 2021 ©SOLiD. All Rights Reserved. Confidential & Proprietary. www.solid.com
ALLIANCE DAS 2W N2ROU Product Data Sheet
Specifications
RF Parameters All Bands
Input TX LPOI: -10 to +20 dBm. HPOI: +15 to +43 dBm each port
Power RX N2ROU: -50 dBm max
Output TX +33 dBm for all modules except +32 dBm for 2500TDD
Power RX 0 dBm ± 0.5 dB all bands except -3 dBm for 2100AWS / 2300WCS and -20 dBm for 2500TDD
System TX 53 dB max all modules except 52 dB for 2500TDD
Gain RX All bands 47 dB max (except 27 dB for 2500TDD); 25 dB gain control at remote all bands
Spurious Emissions Maximum Intermodulation Distortion: TX: ≤ -13 dBm @ 9kHz to 5GHz
Nominal Impedance 50 Ohm
System Ripple 4 dB for all modules except 5 dB for 2500 TDD,1900PCS and 3 dB for 2300 WCS
VSWR 1.54:1 typical, 1.65:1 max.
NOTES: TX input power refers to the DAS headend. TX output power is measured at the antenna port. TX and RX output
power is ± 0.5 dB. Additional gain control available at head end including uplink gain control. See the AOR data sheet for
VHF/UHF specifications.
RF 700LTE + 800/850 2500 TDD
600LTE 1900PCS 2100AWS 2300WCS
Parameters Band 14 Cell (Full Band)
NF (typical) 4.3 dB 4.8 dB 4.2 dB 4.6 dB 3.1 dB 5 dB 5.2 dB
NF (max.) 4.8 dB 5.5 dB 4.5 dB 5.3 dB 3.6 dB 5.3 dB 6.0 dB
IIP3 (typical) -20.2 dB -20.4 dB -15 dB -17.3 dB -19.8 dB -18 dB -20.8 dB
IIP3 (max.) -20.9 dB -20.9 dB -15.5 dB -17.8 dB -20.3 dB -18.5 dB -21.3 dB
EVM (typical) 1.5% 2.0% 2.0% 1.9% 1.5% 1.3% 1.8%
EVM (max.) 2.0% 2.5% 2.5% 2.5% 2.0% 1.7% 2.5%
Downlink 617-652 729-768 862-894 1930-1995 2110-2180 2350-2360 2496-2690
699-716
Uplink 663-698 817-849 1850-1915 1710-1780 2305-2315 2496-2690
777-798
Power 600LTE Base Module: 700LTE+FN / 800/850C / 2500 TDD
2300WCS
Consumption (Max) (DL only) 1900PCS / 2100AWS (Full Band)
2W N2RDU 31W 139W 56W 62W
N2ROU Chassis RCPU, RPSU, R-Optic = 16W
NOTES: For total power, add the power consumption of the included N2RDU’s to the chassis’ power consumption.
Optical Specification
Wavelength Tx: 1550 nm; Rx: 1310 nm
Loss 4-port optic module: 5 dBo max.; 1-port optic module: 10 dBo max.
Regulatory Specification
Type Approval FCC, IC, FCC Part 15 Subpart B, Class A
Safety NRTL Certified
This equipment uses a Class 1 LASER according to FDA/CDRH Rules. This product conforms to
FDA/CDRH
all applicable standards of 21 CFR Chapter 1, Subchapter J, Part 1040.
Version 2.1 – October 2021 ©SOLiD. All Rights Reserved. Confidential & Proprietary. www.solid.com
ALLIANCE DAS 2W N2ROU Product Data Sheet
Mechanical Specification
Mounting Type Wall mount standard or rack mount with additional bracket
Antenna Connectors Antenna port type: 4.3-10 DIN
External Alarm Interface 5-Pin connector on bottom panel
Optical Connector SC / APC, step ferrule, waterproof, single mode fiber
Monitoring Port - 30 dB (±3 dB), SMA female, TX output only, located on multiplexer
Craft Port Serial interface RS-232 9-pin D-sub Male
Dimensions (WxHxD) 21 x 16.5 (10U) x 10.2 inches (535 x 420 x 260mm) Including wall mount bracket
Weight 73 lbs. (33 kg) for base model (4 bands). Max 86 lbs. (39 kg) with 7 bands.
MTBF 11.51 Years (fully loaded unit)
Ingress Protection IP66, NEMA 4
Operating Environment Temp: 14° to 122°F / -10° to 50°C. Humidity: 5 to 90% non-condensing
Overview
This highly efficient, small footprint unit can support up to seven bands simultaneously. An optional Add-on
remote unit (AOR) can be connected to the N2ROU to offer VHF/UHF services.
The N2ROU enclosure incorporates a rugged, yet compact NEMA 4 design. Units can be wall or rack mounted,
indoors or outdoors. A dry contact relay can be used for input alarms from external units, like battery backup.
Unit Name Unit Description
2W Remote Optic Unit (N2ROU) Enclosure with CPU, R-Optic, AC or DC power, base amplifier, multiplexer
Remote Power Supply Unit (RPSU) AC: 100 to 240V; DC: -42 to -56V
Remote Central Processor Unit (RCPU) Controls and monitors signals for each unit
Remote Drive Unit (N2RDU) Filters and amplifies downlink / uplink signals
Remote Optic Module (R Optic) Converts downlink optical signals to RF and uplink RF signals to optical
Multiplexer Combines Tx signals to antenna port and distributes Rx signals to amplifiers
Dry Contact Relay Used for input alarms from external units, like battery backup systems
Version 2.1 – October 2021 ©SOLiD. All Rights Reserved. Confidential & Proprietary. www.solid.com
ALLIANCE DAS 2W N2ROU Product Data Sheet
Ordering Information / Part Numbers
Base Models: The base model can be ordered with AC or DC power. The base model includes the 7-band
multiplexer, CPU, power supply, R-Optic unit, and 4 amplifiers providing 700LTE full band (includes Band 14),
800 (legacy Sprint) / 850 MHz, 1900 PCS, and 2100 AWS 1+3.
Additional Bands: Order additional bands with the initial purchase or add later by ordering the corresponding
amplifiers (N2RDU_600, N2RDU_2300, N2RDU_2500_FB_TDD_R). These modules can be installed in the field
with minimal service disruption.
VHF/UHF: The Add-on Remote (AOR) is required to support VHF/UHF. Order the AOR (ROU_Add-on_AC or
DC), the amplifier (PS2RDU_E_VHF_UHF), and cable kit (N2ROU-AOR).
External Alarm: The cable kit (N2ROU-DRY) is needed to support an external alarm when an AOR is not used.
Part Number 2W N2ROU / N2RDU
N2ROU_BASE_7B_AC 2 WATT Remote Unit, 700/8085/1900/2100, MUX_7B - AC
N2ROU_BASE_7B_DC 2 WATT Remote Unit, 700/8085/1900/2100, MUX_7B - DC
N2RDU_600 2 WATT Amplifier Module, 600
N2RDU_2300 2 WATT Amplifier Module, 2300
N2RDU_2500_FB_TDD_R 2 WATT Amplifier Module, 2500TDD Full Band
N2ROU_AOR Kit N2ROU AOR Cable Kit
N2ROU-DRY Kit N2ROU Dry Contact Kit
Additional information is available in the following documents, available from SOLiD Support.
SOLiD Operations Manual – ALLIANCE DAS REL6
SOLiD Installation Manual – ALLIANCE DAS REL6
SOLiD Data Sheet – ALLIANCE MTBF Specification
SOLiD Data Sheet - Add-On Remote (AOR)
Version 2.1 – October 2021 ©SOLiD. All Rights Reserved. Confidential & Proprietary. www.solid.com
