S 36 X
Truck-mounted concrete pump
Vertical reach 35.2 m
Concrete output max. 161 m3/h
Pressure on concrete max. 85 bar
The SCHWING S 36 X
The benchmark for reliability
With its proven technology and main components developed and manufactured by SCHWING, the S 36 X
ensures maximum reliability so there are no surprises - even when operating high pump power at low engine
speed. The legendary ROCK valve, famed for its robustness and dependability, provides unmatched low
operating and maintenance costs. And when it is time for a new SCHWING concrete pump, the high resale
value makes it easier to say goodbye.
Boom Pump kit
The turret can be rotated 365° in either The switching of the ROCK and the differential
direction and the tip section can rotate cylinders is controlled hydraulically. This ensures
238° meaning that even the most deman- high reliability even under difficult operating
ding placement situations can be mastered conditions and makes maintenance of the
effortlessly. And the robust construction system much simpler.
ensures a long service life.
Concrete valve Supply control
The legendary low wear ROCK The water box can be filled and emptied, and
valve with its optimal geometry for the water pump, agitator, spray hose, high pressure
low-friction concrete flow ensures low jet wash and compressor, all controlled via the new
service and operating costs. Being standardised supply control. This is the standard for
fast and easy to clean, the S 36 X is all SCHWING truck-mounted concrete pumps for
quickly ready for the next job. greater clarity and ease of operation.
S 36 X Truck-mounted concrete pump
R folding
Open hydraulic system
The S 36 X open hydraulic system
converts the engine power efficiently
into pump power with little loss. Thus,
the usual practice output rates can
be realized with a fuel-saving engine
speed below 1000 rpm.
*mounted on Mercedes-Benz
Outriggers
The unique combination of front X
and rear H outriggers results in a
uniquely small footprint. The only
thing smaller is the risk of damaging
the outriggers – thanks to their
protected piston rods and internally
laid hydraulic lines.
Remote control SC 30 VECTOR control
The light weight, easy to use and comfortable The machine operator can inspect machine
SC 30 helps minimise fatigue, allowing the data, operating conditions and settings on
operator to focus on the job for extended S 36 X, changing various parameters, all
periods. The powerful batteries guarantee an through the intuitive VECTOR control. The
operating time of at least 8 hours. integrated diagnostic system ensures safe
operation and also reminds the operator when
maintenance is necessary.
S 36 X Truck-mounted concrete pump
Technical data
Performance
Pump kit P2023-110/75 P2023-110/75 P2025-120/80
Drive l/min 535 636 535
Delivery cylinders mm 230 x 2,000 230 x 2,000 250 x 2,000
Concrete output max. m3/h 136 161 136
Pressure on concrete max. bar 85 85 85
Stroke rate max. 1/min. 27 32 23
Concrete valve M-ROCK M-ROCK B-ROCK
(Option: B-ROCK) (Option: B-ROCK)
Hydraulic system
Design open system
Hydraulic tank l 370
Boom 36 R
Delivery line DN 125
Length of end hose m 4.00
Vertical reach m 35.20
Reach depth m 24.00
Horizontal reach m 31.25
Net horizontal reach m 29.80 (mounted on Mercedes-Benz)
Number of boom sections 4
Height of joints (supported) m 4.00 / 12.4 / 20.1 / 27.90
Slewing range 2 x 365°
Folding height m 8.32
Support
Outrigger width, front m 6.21
Outrigger width, rear m 5.70
Outrigger load, front kN 190
Outrigger load, rear kN 150
SCHWING concrete pumps. Efficiency as standard.
10311048.03.2016
SCHWING GmbH Stetter GmbH
Heerstrasse 9-27 · 44653 Herne, Germany Dr.-Karl-Lenz-Strasse 70 · 87700 Memmingen, Germany
Fon +49 23 25 - 987-0 · Fax +49 23 25 - 72922 Fon +49 83 31 - 78-0 · Fax +49 83 31 - 78 275
www.schwing-stetter.com ·
[email protected] www.schwing-stetter.com ·
[email protected] Subject to technical and dimensional modifications. Illustrations are non-binding. The exact standard specification, the scope of delivery and the technical data are detailed in the offer.
