Product

Sheet

SYMAP®

SYMAP® - Advanced Feeder Protection

relay

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

SYMAP® - Advanced Feeder Protection relay

SYMAP® F is designed for land and marine applications

for protection, control, measurement and monitoring of
low and medium voltages power systems. All protection
functions in SYMAP® F can be activated simultaneously,
and there are no limits to using all of them at the same
time. Hence follows, that SYMAP ® F can be used in
different switchgear and network applications.

SWICHGEAR Control and Interlocking

• single busbar
• double busbar
• duplex systems;
• interlocking at feeder level;
• interlocking at station level

NETWORKS

• isolated networks,
• resonant-earthed networks and
• solidly, and partially earthed networks

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

PROTECTION APPLICATIONS
24 Overexcitation protection
25/A Synchrocheck
27 Undervoltage, instantaneous, definite time
27 B BUS undervoltage, definite time
32 Overload relay
46 Reverse phase current
47 Phase sequence voltage
49 Thermal overload protection
50 BF Breaker failure
50 Overcurrent, instantaneous
50 G/N Current earth fault, instantaneous
51 AC time overcurrent, definite time, IDMT
51 G/N AC ground overcurrent, definite time, IDMT
Overvoltage relay, instantaneous, definite time,
59
normal inverse
59 B BUS overvoltage relay, definite time
59 N Residual overvoltage
64 Ground overvoltage
67 AC AC directional overcurrent, definite time, IDMT
67GS/GD directional earth fault, definite time
78 Vector surge supervision
79 Auto reclosing
81 Frequency supervision
81 B BUS frequency supervision
86 Electrical lock out
94 Trip circuit supervision
95 i Inrush blocking
-- FF Fuse failure (voltages)
-- FL Fault locator
www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

MONITORING AND MEASUREMENT FUNCTIONS


• 3 × phase-to-phase and line voltages of feeder and BUS1
• 3 × phase feeder current (average/max. value)
• Frequencies of all systems (min./max. value)
• Ground current and voltage (max. value)
• Active and reactive power of each phase
• Active and reactive ground power
• Power factor of each phase
• Active and reactive power counter (reverse and forward,
constant and temporary)
• Operating hours
• Breaker cycles (life time)
• Harmonic waves of feeder current and voltage (up to 5th
harmonic wave)
• Circuit-breaker wear monitoring
• Trip circuit supervision (94)
• Fuse failure monitor
• 5 oscillographic fault records

COMMUNICATION INTERFACES


• 1 RS232 programming on front or rear
• 1 CANBUS interlocking, CB control, power management system..,
• RS422/RS485 port
• Fiber optic
• RJ45

PROTOCOLS
• PROFIBUS DP
• MODBUS
• IEC60870-5-103
• IEC61850

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

PLC - powerful PLC function

Powerful PLC function. A large number of PLC functions and blocks, user programmable
inputs and outputs, large numbers of predefined logical results as event numbers allows user
powerful control and automation functions.

CONTROLS

• programmable inputs and outputs
• programmable interlocking
• five CB control
• programmable PMS functions


Hardware:

Housing: : small, special design from steel and aluminium (suitable for aggressive
environment)
Terminals: pluggable
Display : large graphical LCDisplay


ANALOG INPUTS FOR MEASURING AND PROTECTION

• 3 × CT for feeder current
• 1 × CT for ground current or sensitive ground current
• 3 × PT for feeder voltage
• 3 × PT for BUS1 voltage
• 1 × PT for ground voltage
Option:
• 3 × PT for BUS2 voltage

Analog I/O 0-20mA

• 2 x Analog outputs 4-20 mA (optional and hardware depending)
• 2 x Analog outputs 4-20 mA (optional and hardware depending)

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

Binary I/O

Configurable binary inputs

• 14(20) binary inputs(basic unit)


Configurable binary outputs (output relays)

• 8 binary outputs
• 1 lock out relay
• 1 synchro on relay
• 2 shunts
• 4 binary outputs optional in basic card

Other functions:

ALARMS

• 80 configurable alarms
• 20 configurable groups


Two rows text description for each Alarm/Trip in chronological order.

Annunciator Page:

• 16 or 32 graphical states with user defined text description

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

Event History

SYMAP® automatically collects and stores all activated events indicating their number, title,
coming/going status, and time stamp. A maximum of 5.000 events can be stored. In case of
overflow, data overwriting operates according to the first-in-first-out (FIFO) principle.

Detailed Protection Function History

SYMAP® F automatically collects and stores all activated events related to protection
functions with a time stamp.

• Event number
• Event title
• Time stamp
• Pickup or trip value (with fault phase indication)
• Setting value
• Trip time
• 3-line voltage and current pickup, synchronized with the trip event

A maximum of 1.000 protection function events can be stored. In case of overflow, the
oldest data will be recorded over.

Data Recorder (Option)

• Number of samples (6 - 72)
• Recording period (5 - 60 sec)
• Pre-trigger (0 - 100%)
• Trigger event (stop for recorder)


Diagnostics and Monitoring

SYMAP® F has three microprocessors that supervise each other, providing a watchdog
system. Important functions are laid out in a double redundancy combination, operating
independently with the second processor. Connected separately, an optional unit for short
circuit protection operates parallel to the SYMAP® F device and will do so even if the entire
voltage fails.

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0



Product Sheet

SYMAP® F provides various diagnostic and monitoring functions as follows:

• All memories (ROMs, RAMs, EEPROMs)
• All analog reference voltages
• Automated test sequences
• Control power ON/OFF of SYMAP® F
• Binary input and output for control logic

The following supervising systems are offered by SYMAP® F:

• Self diagnostics of SYMAP® F
• The inputs of analog data (auxiliary circuit)
• The status and position of switching device and motor's on-off status
• Supervising supply of trip coil
• Gas pressure
• Temperature inside panel
• Each operating life of breaker (hours)

Extended Boards (special applications)

• extra binary inputs and outputs: yes
• PT100: yes

Software and accessory:


• Parameter Tool
• Recorder Tool
• Modbus Tool
• History Tool
• “SYMAP Parameter Tool (SPT)” ( NEW software, license is required )
• Firmware Tool
• • Communication cable

Firmware and SPT software:

• Multilingual

www.stuckegroup.com
PS.SYMAP.Feeder.ENG.REV0