MODEL: FJT

Space-saving Plug-in Signal Conditioners F-UNIT 3: E (CRC) (Usable range -270 to +1000°C, -454 to +1832°F)
4: J (IC) (Usable range -210 to +1200°C, -346 to +2192°F)
5: T (CC) (Usable range -270 to +400°C, -454 to +752°F)
THERMOCOUPLE TRANSMITTER 6: B (RH) (Usable range 0 to 1820°C, 32 to 3308°F)
(field-programmable) 7: R (Usable range -50 to +1760°C, -58 to +3200°F)
Functions & Features 8: S (Usable range -50 to +1760°C, -58 to +3200°F)
• Accepting direct input from a thermocouple and providing 9: WRe 5-26 (Usable range 0 to 2320°C, 32 to 4200°F)
a standard process signal N: N (Usable range -270 to +1300°C, -454 to +2372°F)
• Micro-processor based 0: Specify
• Field-programmable T/C type and temperature range
• Linearization
• Burnout protection [2] OUTPUT
• High accuracy cold junction compensation Current
• Loop testing via hand-held programmer PU-2x A: 4 – 20 mA DC (Load resistance 600 Ω max.)
• High-density mounting Voltage
6: 1 – 5 V DC (Load resistance 500 Ω min.)
Typical Applications
• Ideal for quick spare part [3] POWER INPUT
• High-accuracy cold junction compensation benefits narrow AC Power
span measurements K: 85 – 132 V AC
• 0.1 μA burnout sensing enables long distance (Operational voltage range 85 – 132 V, 47 – 66 Hz)
transmission with minimum offset drifts L: 170 – 264 V AC
• Electric furnace (isolation) (Operational voltage range 170 – 264 V, 47 – 66 Hz)
• No burnout type can connect to a single T/C in parallel DC Power
with recorder R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
26 (1.02) P: 110 V DC
(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

100 [4] OPTIONS (multiple selections)

(3.94)
Burnout
blank: Upscale burnout
/BL: Downscale burnout
137
(5.39) /BN: No burnout
mm (inch)
Other Options
blank: none
/Q: Option other than the above (specify the specification)
MODEL: FJT–[1][2]-[3][4]

SPECIFICATIONS OF OPTION: Q (multiple selections)

ORDERING INFORMATION
COATING (For the detail, refer to M-System's web site.)
• Code number: FJT-[1][2]-[3][4]
/C01: Silicone coating
Specify a code from below for each of [1] through [4].
/C02: Polyurethane coating
(e.g. FJT-2A-R/BL/Q)
/C03: Rubber coating
• Temperature range (e.g. 0 – 800°C)
TERMINAL SCREW MATERIAL
K thermocouple setting will be used if the input code is not
/S01: Stainless steel
specified.
• Specify the specification for option code /Q
(e.g. /C01/S01) RELATED PRODUCTS
• Programming Unit (model: PU-2x)
• PC configurator software (model: JXCON)
[1] INPUT THERMOCOUPLE
Downloadable at M-System’s web site.
1: (PR) (Usable Range 0 to 1760°C, 32 to 3200°F)
A dedicated cable is required to connect the module to the
2: K (CA) (Usable range -270 to +1370°C, -454 to +2498°F)
FJT SPECIFICATIONS ES-1463 Rev.11 Page 1/3

http://www.m-system.co.jp/
 MODEL: FJT
PC. Please refer to the internet software download site or S: 0 to 1600°C
the users manual for the PC configurator for applicable WRe 5-26: 0 to 2000°C
cable types. N: 0 to 1000°C

GENERAL SPECIFICATIONS INSTALLATION

Construction: Plug-in Power input
Connection: M3.5 screw terminals (torque 0.8 N·m) •AC: Approx. 4.5 VA
Screw terminal: Nickel-plated steel (standard) or stainless •DC: 24 V approx. 70 mA
steel 110 V approx. 20 mA
Housing material: Flame-resistant resin (black) Operating temperature: -5 to +55°C (23 to 131°F)
Isolation: Input to output to power Operating humidity: 30 to 90 %RH (non-condensing)
Overrange output: Approx. -10 to +120 % at 1 – 5 V Mounting: Surface or DIN rail; Standard Rack Mounting
Linearization: Standard Frame BX-16H available
Cold junction compensation: CJC sensor attached to the Weight: 220 g (0.49 lb)
input terminals
Adjustments: Programming Unit (model: PU-2x);
PERFORMANCE in percentage of span
(Refer to the users manual of JXCON for the adjustments
Accuracy: ±0.1 %
configurable with JXCON.)
Linearization accuracy: ±0.05 %
• T/C type
Cold junction compensation error: ±0.5°C or ±0.9°F
• temp. range
(at 20°C ±10°C or 68°F ±18°F)
• zero and span
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
• simulating output
Response time: ≤ 0.8 sec. (0 – 90 %)
• Others
Burnout response: ≤ 10 sec.
Line voltage effect: ±0.1 % over voltage range
INPUT SPECIFICATIONS Insulation resistance: ≥ 100 MΩ with 500 V DC
Minimum span: 3 mV Dielectric strength
Offset: Max. 3 times span Power input code R:
Input resistance: 20 kΩ min. 1000 V AC @ 1 minute (input to output)
Burnout sensing: 0.1 μA 2000 V AC @ 1 minute (input or output or power to ground)
Minimum span in °C and °F 500 V AC @ 1 minute (I/O to power)
(PR): 370°C, 670°F Power input code K, L, P:
K (CA): 75°C, 140°F 1000 V AC @ 1 minute (input to output)
E (CRC): 50°C, 90°F 2000 V AC @ 1 minute (input or output or power to ground)
J (IC): 60°C, 110°F 1500 V AC @ 1 minute (I/O to power)
T (CC): 75°C, 140°F
B (RH): 780°C, 1410°F
R: 360°C, 650°F
S: 380°C, 690°F
WRe 5-26: 200°C, 360°F
N: 110°C, 200°F
Note: The described accuracy may be partially not satisfied
when the temperature ranges below 0°C. Consult factory.

If not specified, the input range is shown below.

(PR): 0 to 1600°C
K (CA): 0 to 1000°C
E (CRC): 0 to 500°C
J (IC): 0 to 500°C
T (CC): 0 to 300°C
B (RH): 0 to 1800°C
R: 0 to 1600°C

FJT SPECIFICATIONS ES-1463 Rev.11 Page 2/3

http://www.m-system.co.jp/
 MODEL: FJT
EXTERNAL DIMENSIONS unit: mm (inch)
CLAMP
(top & bottom) 7.8 (.31)

1 2
DIN RAIL 15 3 4
35mm wide (.59)
100 (3.94)

93 (3.66)
2–4.5 (.18)
HOLE
15 (.59) deep

5 6
8–M3.5 7 8
SCREW
26 (1.02) 107 (4.21) 26 (1.02)
137 (5.39) [3.3 (.13)]

•When mounting, no extra space is needed between units.

TERMINAL ASSIGNMENTS unit: mm (inch)

CJC SENSOR
(model: CJM)
14 (.55)

1 1 2
3 4

5 6
7 8

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

comp. leadwire Isolation

T/C
+ Low Drift Digital Output
+ 1 5 +
Amplifier Computation Driver
OUTPUT
– 6 –
metal leg –
CJC 2 7 U(+)
SENSOR POWER
3 8 V(–)
model: CJM
4 Burnout

PU-2x MODULAR JACK

SERIAL TRANSMISSION LINE

Base Socket

Specifications are subject to change without notice.

FJT SPECIFICATIONS ES-1463 Rev.11 Page 3/3

http://www.m-system.co.jp/