Product data sheet
E 250 NT
AREAS OF APPLICATION
Smoke and heat extraction system and natural ventilation (24 V) for direct opening in the façade and roof
area
Inward- and outward-opening windows with bottom-hung, top-hung and side-hung leaves
Can be used in the exhaust air and air intake
Protected outdoor area (e.g. conservatories) with variant E 250 NT AB
Installation on wooden, plastic or metal windows
Compact design spindle drive with a wide area of application
AREAS OF APPLICATION
Smoke and heat extraction system and natural ventilation (24 V) for direct opening in the façade and roof
area
Inward- and outward-opening windows with bottom-hung, top-hung and side-hung leaves
Can be used in the exhaust air and air intake
Protected outdoor area (e.g. conservatories) with variant E 250 NT AB
Installation on wooden, plastic or metal windows
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:10Z
Product data sheet | Page 2 of 9
E 250 NT
PRODUCT FEATURES
Continuously adjustable drive stroke and individual speeds for ventilation and smoke and heat extraction
Synchronisation of max. four drives without external control unit
Easy change of the mode of operation (Solo and Syncro, master/slave) via DIP switch
IQ windowdrive - intelligent drive control
SHEV tested according to EN 12101-2
TECHNICAL DATA
Productname E 250 NT
Possible stroke heights 100 mm, 150 mm, 200 mm, 230 mm, 300 mm, 500 mm, 750 mm, 1000
mm
Opening speed smoke and heat extraction: 5.7 mm, stroke 500: 9.5 mm/s
Opening speed ventilation 5 mm/s
Tensile force (max.) 750 N
Force of pressure (max.) 750 N
Holding force (max.) 2000 N
Voltage at operation 24 V, ± 25 %
Operating voltage 24 V DC
Current consumption 1.3 A
Power consumption Ventilation (24 V): 0.9 A; RWA (18 V): 1.0 A, Stroke 500: Ventilation (24
V): 1.1 A; RWA (18 V): 1.3 A
Power consumption 20 W
Duty rating 30 %
Connection cable length 2m
Special length of power supply cable 5 m, 7.5 m
Cable dimensions 4 cores 0.75 mm²
Temperature range -5°C...+70°C
IP rating IP65
protection rating III
Syncro function Yes
Additional locking available Yes
Type of additional locking device Locking drive
Type of stroke shortening Synchronising unit, Factory setting
End position cut-off extended electronic, via internal path sensor
End position cut-off retracted electronic, via path and load
Overload cut-off Yes
Complete opening within 60 s yes, up to 500 mm stroke
SHEV tested Yes
SHEV additional information yes, up to 500 mm stroke
Synchronisation (max.) 4 drives
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:10Z
Product data sheet | Page 3 of 9
E 250 NT
Bottom-hung window INWARD-opening frame installation Yes
Bottom-hung window INWARD-opening leaf installation Yes
Bottom-hung window OUTWARD-opening frame Yes
installation
Side-hung window INWARD-opening frame installation Yes
Side-hung window INWARD-opening door leaf installation Yes
Side-hung window OUTWARD-opening frame installation Yes
Top-hung window INWARD-opening frame installation Yes
Top-hung window INWARD-opening leaf installation Yes
Top-hung window OUTWARD-opening frame installation Yes
OUTWARD-opening roof window Yes
NETWORKING
VARIANTS / ORDER INFO
Operating
Name Description Ident-No. Colour Stroke voltage
E 250 NT 146657 acc. to RAL 200 mm 24 V DC
E 250 NT - special Can be configured: Stroke, cable length, colour, 146676 24 V DC
version variant E 250 NT AB
E 250 NT 146659 white RAL 230 mm 24 V DC
9016
E 250 NT 146665 white RAL 500 mm 24 V DC
9016
E 250 NT 146672 acc. to RAL 750 mm 24 V DC
E 250 NT 146661 EV1 300 mm 24 V DC
E 250 NT 146674 white RAL 1000 mm 24 V DC
9016
E 250 NT 146671 white RAL 750 mm 24 V DC
9016
E 250 NT 146670 EV1 750 mm 24 V DC
E 250 NT 146673 EV1 1000 mm 24 V DC
E 250 NT 146651 acc. to RAL 100 mm 24 V DC
E 250 NT 146662 white RAL 300 mm 24 V DC
9016
E 250 NT 146664 EV1 500 mm 24 V DC
E 250 NT 146660 acc. to RAL 230 mm 24 V DC
E 250 NT 146653 white RAL 150 mm 24 V DC
9016
E 250 NT 146663 acc. to RAL 300 mm 24 V DC
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail
[email protected] 2021-08-06T02:37:11Z
Product data sheet | Page 4 of 9
E 250 NT
Operating
Name Description Ident-No. Colour Stroke voltage
E 250 NT 146655 EV1 200 mm 24 V DC
E 250 NT 146500 white RAL 100 mm 24 V DC
9016
E 250 NT 146658 EV1 230 mm 24 V DC
E 250 NT 146656 white RAL 200 mm 24 V DC
9016
E 250 NT 146675 acc. to RAL 1000 mm 24 V DC
E 250 NT 146652 EV1 150 mm 24 V DC
E 250 NT 146499 EV1 100 mm 24 V DC
E 250 NT 146654 acc. to RAL 150 mm 24 V DC
E 250 NT 146666 acc. to RAL 500 mm 24 V DC
ACCESSORY
ADAPTER FOR CONSOLE E 250 NT NSK-S
For installation of the E 250 NT spindle drive on Schüco roof windows
Ident- Syncro
Name Description No. Colour function
Adapter for console E 250 suitable for installation on the secondary closing edge of roof 138370 EV1 0
NT NSK-S windows (Schüco AWS57 RO)
EYE BOLT E 250 NT DRM
For installation of the E 250 NT spindle drive
Syncro
Name Description Ident-No. Colour function
Eye bolt E 250 NT suitable for installation on the secondary closing edge of roof 138368 silver- 0
DRM windows coloured
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:11Z
Product data sheet | Page 5 of 9
E 250 NT
SWIVELLING CONSOLE E 250 NSK
For roof window installation of the E 250 NT spindle drive
Ident- Syncro
Name Description No. Colour function
Swivelling console E with eye bolts and leaf bracket / suitable for installation on the 138367 silver- 0
250 NSK secondary closing edge of roof windows coloured
SWIVELLING CONSOLE E 250 NT
For roof window installation of the E 250 NT spindle drive
Name Description Ident-No. Colour Syncro function
Swivelling console E 250 NT With eye bolts and leaf bracket 116114 acc. to RAL 0
Swivelling console E 250 NT With eye bolts and leaf bracket 116112 EV1 0
Swivelling console E 250 NT With eye bolts and leaf bracket 116113 white RAL 9016 0
CONSOLE INWARD E 250 NT / E 350 N
For installation of the E 250 NT and E 350 N spindle drives
Name Description Ident-No. Colour Syncro function
Console INWARD E 250 NT / E 350 N With eye bolts and leaf bracket 027223 white RAL 9016 0
Console INWARD E 250 NT / E 350 N With eye bolts and leaf bracket 027222 acc. to RAL 0
Console INWARD E 250 NT / E 350 N With eye bolts and leaf bracket 027218 EV1 0
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:12Z
Product data sheet | Page 6 of 9
E 250 NT
STANDARD CONSOLE E 250 NT / E 350 N
For installation of the E 250 NT and E 350 N spindle drives
Name Description Ident-No. Colour Syncro function
Standard console E 250 NT / E 350 N With eye bolts and leaf bracket 020879 white RAL 9016 0
Standard console E 250 NT / E 350 N With eye bolts and leaf bracket 019032 EV1 0
Standard console E 250 NT / E 350 N With eye bolts and leaf bracket 020878 acc. to RAL 0
BRACKET E 250 NT NSK
For roof window installation of the E 250 NT spindle drive
Name Ident-No. Colour Syncro function
Bracket E 250 NT NSK 138369 silver-coloured 0
LEAF BRACKET E 1500 HSK HE
For roof window installation of the E 1500 N, E 250 NT and E 350 N
spindle drives
Ident- Syncro
Name Description No. Colour function
Leaf bracket E 1500 suitable for installation on the main closing edge of roof windows (Heroal 136190 EV1 0
HSK HE 85 D), can also be used for E 250 NT / E 350 N
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:12Z
Product data sheet | Page 7 of 9
E 250 NT
LEAF BRACKET E 1500 NSK A-HU
For roof window installation of the E 1500 N and E 250 NT spindle drives
Ident- Syncro
Name Description No. Colour function
Leaf bracket E 1500 suitable for installation on the secondary closing edge of roof windows 136189 EV1 0
NSK A-HU (Alcoa AA 100, Hueck VF 50/60), can also be used for E 250 NT
LEAF BRACKET E 1500 NSK HE
For roof window installation of the E 1500 N and E 250 NT spindle drives
Ident- Syncro
Name Description No. Colour function
Leaf bracket E 1500 suitable for installation on the secondary closing edge of roof windows 136188 EV1 0
NSK HE (Heroal 85 D), also suitable for E 250 NT
LEAF BRACKET E 1500 NSK W-HU
For roof window installation of the E 1500 N and E 250 NT spindle drives
Ident- Syncro
Name Description No. Colour function
Leaf bracket E 1500 suitable for installation on the secondary closing edge of roof windows 136187 EV1 0
NSK W-HU (Wicona WT 50/60, Hueck 85 E), can also be used for E 250 NT
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:13Z
Product data sheet | Page 8 of 9
E 250 NT
LEAF BRACKET E 1500/ E 3000 NSK SURFACE MOUNTING
For roof window installation of the E 1500 N, E 1500 S, E 3000 and E 250
NT spindle drives
Ident- Syncro
Name Description No. Colour function
Leaf bracket E 1500/ E suitable for installation on the secondary closing edge of roof 140713 EV1 0
3000 NSK surface mounting windows (Aluprof MB-SR50), can also be used for E 250 NT
SAFETY SCISSOR STAY NO. 35
For protection of bottom-hung leaves
Name Description Ident-No. Colour
Safety scissor stay no. 35 Fix pack available from stock (10 pcs), minimum leaf height 300mm 014499 galvanised
SAFETY SCISSOR NO. 60
For protection of bottom-hung leaves
Name Description Ident-No. Colour
Safety scissor stay no. 60 Fix pack available from stock (10 pcs), minimum leaf height 700mm 133814 galvanised
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:13Z
Product data sheet | Page 9 of 9
E 250 NT
SERVICE CASE IQ WINDOWDRIVE
For commissioning and parameter setting of the window drives from the
IQ windowdrive range
Ident- Supply
Name Description No. Colour voltage
Service case GEZE IQ for service case of 24 V window drives and for parameter setting 142586 silver- 100 - 240 V
windowdrive of the IQ window drives in combination with the ST 220 coloured AC
POWER SUPPLY HS
24 V power supply for top hat rail mounting
IQ GEAR
Interface for activation of the Slimchain, Powerchain and E 250 NT
window drives in ventilation mode
Name Description Ident-No.
IQ gear Interface for activation of the Slimchain, Powerchain and E 250 NT window drives in ventilation mode 151959
IQ BOX SAFETY
Safety module to protecting hazardous ateas of power-operated
windows
Ident- Dimension Operating Type of
Name Description No. s voltage installation
IQ box Closing edge safety module for 24V window drives of the IQ 187677 35 x 90 x 24 V DC Top hat rail
Safety windowdrive series. One IQ box Safety is needed per window 60 mm mounting
(also for Syncro applications and with locking drives). Top hat
rail mounting (space needed 32 mm/2 TE)
GEZE GmbH Reinhold-Vöster-Straße 21–29 D-71229 Leonberg TEL +49 7152 203-0 WEB www.geze.de Mail [email protected]
2021-08-06T02:37:14Z
