Technical Data Sheet

SP-100
Stain-free Grout

Stain-free grout for interior & covered exterior

floor & wall

Substrates
Features / Benefits
• Ceramic tile

• Stain-free • Vitrified tile

• Glass Mosaic Tiles
• Colour fast
• Granite
• Easy to clean • Marble
• Chemical and Temperature resistant • Metal tiles
• Non-cracking or powdering • Agglomerates (Engineered Stones)
• Complies with ANSI A 118.3, EN 13888, • Precast Terrazzo tiles
standards.
• Water and shock resistant.
• Food grade – Certified by CFTRI, Mysore

Application Compliance
Designed especially for interior and covered exterior
floor and wall joints of all types of ceramic tile, ISO 13007 / EN ANSI A118.3
vitreous, semi-vitreous tile, glass mosaic tiles, metal 13888
tiles, precast terrazzo, engineered stone floors and
natural stones. Recommended for Institutional and
commercial kitchens, Cafeterias, residential facilities,
Rest rooms, Schools and wet areas like swimming
pools, sauna, water bodies and wash rooms.

MYKL-TDS- L SP-100 – REV 01; 08/18

 standard
conditions: ISO
TECHNICAL DATA 13007 – 4: Clause
Applicable Standards: 4.1.4; EN 12808
ANSI A118.3; ISO 13007 – 3 (RG) / EN 13888 –4
Shrinkage: ISO
ANSI Data 13007 – 4: Clause
< 1.5mm / m 0.6 – 0.8 mm /m
Property / Test Requirement Typical Values 4.3 : EN 12808 –
4
Method
Water Absorption
Water cleanability:
ANSI A118.3: >80 Minutes 90-120 Minutes after 240 Minutes:
ISO 13007 – 4: ≤0.1 g 0.015 – 0.040 g
Clause 5.1
Clause 4.2; EN
Initial Setting Time:
12808 – 5
ANSI A118.3: >120 Minutes 200 - 260 Minutes
Chemical
Clause 5.2 See Chemical resistance chart
Resistance
Service Setting
The grout mortar conforms to ISO 13007 – 4 (RG) / EN
Time: ANSI 48 Hours – 72
≤ 7 Days 13888.
A118.3: Clause Hours
5.2 The mix density of SP-100 grout is 1710 kg /m3.
Shrinkage after 7
Packaging:
days: ANSI
< 0.25% < 0.10%
A118.3: Clause SP-100 is a factory proportioned kit with Hardener
5.3
Sag in Vertical (Part A), Resin (Part B), and colored filler powder (Part C).
Joints: ANSI No change in Pass. No change in
A118.3: Clause shape of joint shape of joint Unit Net weight
5.4 1/5th unit 1.0 kg
Bond strength to 1 full unit 5.0 kg
Quarry Tile: ANSI >1000 psi >1100 psi Double unit 10.0 kg
A118.3: Clause (6.87 Mpa) (7.86 Mpa)
5.5
Compressive Colour:
Strength after 7 7500 – 8200 psi
>3500 psi Choose from range of colours available in Part C filler
days: ANSI (51.56 – 56.37
(24.06 Mpa) powder. Please refer the grout colour chart for choosing
A118.3: Clause Mpa)
5.6 the colour required.
Tensile Strength Coverage:
2300 – 2600 psi
after 7 days: ANSI >1000 psi
(15.81 – 17.87 Please refer the coverage chart as it depends
A118.3: Clause (6.87 Mpa)
Mpa) on the tile size, joint width and depth.
5.7)
Thermal Shock
>500 psi 1000 – 1100 psi
ANSI A118.3:
(3.43 Mpa) (6.87 – 7.86 Mpa) Working Properties at 70° F (21° C)
Clause 5.8)
The grout mortar conforms to ANSI A 118.3 Working properties:
Pot life 45 minutes
Foot traffic 24 hours
ISO / EN Data Heavy traffic 72 hours
Property / Test Requirement Typical Values
Method
CHEMICAL RESISTANCE CHARTS: At 23° C
Abrasion
Acid Based Chemicals
resistance: ISO
≤ 250 mm³ Pass Chemical Concentration PE IE SE
13007 – 4: Clause
4.4; EN 12808 - 2 2.5% VG VG VG
Acetic Acid
Flexural strength 5% G VG VG
under standard • HCL 10% VG VG VG
conditions: ISO 20% VG VG VG
≥ 30 N / mm² 38 - 40 N / mm² • H2SO4
13007 – 4: Clause 50% P G G
4.1.3; EN 12808 - • Formic 2.5% VG VG VG
3
Acid 10% P P P
Compressive
≥ 45 N / mm² 55 – 57 N / mm² Nitric Acid 10% P G VG
Strength under

MYKL-TDS- L SP-100 – REV 01; 08/18

 Citric Acid 10% VG VG VG Carbon Tetra
NA P P G
Tartaric Acid 50% VG VG VG Chloride
Tannic Acid 50% VG VG VG Methylene
NA P P P
Benzoic Acid 5% VG VG VG Chloride
Oxalic Acid 10% VG VG VG Toluene NA P P G
PE: Prolonged Exposure; IE: Intermittent Exposure: SE: Xylene NA P P G
Splash Exposure; P: Poor: G: Good; VG: Very Good; Butyl Acetate NA P P VG
• Long exposure will cause colour change PE: Prolonged Exposure; IE: Intermittent Exposure: SE:
Splash Exposure; P: Poor: G: Good; VG: Very Good;
NA: Not Applicable
Base and Salt Solutions • Long exposure will cause colour change
Chemical Concentration PE IE SE
Sodium
50% VG VG VG INSTALLATION
Hydroxide
Ammonia
25% VG VG VG Important site Checks: Notes to the specifiers:
Solution
Baking Soda 20% VG VG VG • It is recommended to check the colour of the
• grout, if it is meeting the desired colour of the
Hypochlo client
4% P G VG • It is recommended to do a small area with actual
rite
Solution tile/stone at site and check for any colour ingress
• Potassium 1% VG VG VG into the tile/stone. Many tiles / stones have high
Permangana absorption which may lead to discoloration /
10% P P VG colour marks.
te
• Plan to provide proper movement joints,
Calcium
10% VG VG VG peripheral joints as per EJ 171 to accommodate
Chloride
movements in tile/stone and use flexible grout /
Hydrogen 1% VG VG VG
sealant to fill these movement joints.
Peroxide 10% VG VG VG
• SP 100 is a solid epoxy grout and does not
PE: Prolonged Exposure; IE: Intermittent Exposure: SE:
accommodate movements in tile/stone that can
Splash Exposure; P: Poor: G: Good; VG: Very Good;
occur due to various reasons. Movements which
• Long exposure will cause colour change occur in the tile/stone area due to non provision
of movement joints will lead to cracks /
Household / Food Stuff Solutions breakage of grout joints / tile/ stone.
Chemical Concentration PE IE SE • Keep the working area covered and protected
Coffee NA VG VG VG from Sun light while application of SP-100, stain
Milk NA VG VG VG free epoxy grout, is applied in open areas like
Vinegar NA VG VG VG swimming pools etc. Keep the cover for 7 days
Citrus Juice / and till the filling of pools with water after the
NA P G VG completion of grouting with SP-100, stain free
Sauce
Butter NA VG VG VG epoxy grout.
Beer NA VG VG VG •
Surface Preparation:
Sugar / Glucose NA VG VG VG
Before starting to grout, remove debris in grout joints and
Vegetable Oil NA VG VG VG
lightly sponge the tile surface to remove dust and dirt. Do
Coke NA VG VG VG
not clean tiles with acid cleaners. In case acid cleaners
PE: Prolonged Exposure; IE: Intermittent Exposure: SE:
were used to clean the tiles, ensure to wash the area with
Splash Exposure; P: Poor: G: Good; VG: Very Good;
plenty of water before commencing grouting.
NA: Not Applicable
Substrate temperature must between 60°F (16°C) and
Solvents & Combustible Solutions 90°F (32°C).
Chemical Concentration PE IE SE
• Ethonol NA P G VG Mixing
Acetone NA P G G Empty entire contents of SP-100 Stain free Grout Part “A”
Ethylene Glycol NA VG VG VG and Part “B” container into a clean mixing pail. Mix with
MEK NA P P VG a margin trowel or a slow speed drill mixer until liquids
Glycerol NA VG VG VG are completely blended. Add at least ¾ of SP-100 Part
Chloroform NA P P P “C” Filler Powder and mix to a uniform consistency. Add

MYKL-TDS- L SP-100 – REV 01; 08/18

the remaining filler powder and mix to achieve a stiff mix
to work into the joints. MAINTENANCE
Immediately pour entire contents of bucket onto working LATICRETE® and LATAPOXY® grouts require routine
area. Use a plastic sheet as a drop cloth. Use standard cleaning with neutral pH soap and water or MYK
epoxy grouting techniques to work with SP-100 Grout LATICRETE Clenza series suitable cleaners. All other
into tile joints. SP-100 Grout can also be applied with a LATICRETE® and LATAPOXY® materials require no
caulking gun. Be sure all grout joints are packed full. maintenance but proper installation as per instruction.
Remove as much excess material as possible before Performance and durability may depend on properly
initial cleaning with grout float. Do not leave excess grout maintaining of Installed area.
on the face of tiles.

Cleaning WARRANTY
Remove excess grout from the face of the tiles with the MYK LATICRETE India Pvt Ltd warrants that LATICRETE®
edge of the grout float. Hold the float at a 90° angle and SP
pull it diagonally across the joints and tile to avoid pulling -100 Stain free grout is free from manufacturing defects
out the material. and will not break down, deteriorate or disintegrate under
normal usage for a period of two (2) years from
Initial Cleaning: After 30-45 min of the application of the manufacturing of the product subject to the terms and
grout scrub the surface of the tile & joint with clean water conditions stated in LATICRETE® Product Warranty.
and scrubber provided to remove any excess grout. Then
take a clean thick white towel and drag across the tile to Customer Care
remove any residue.
Final Cleaning: within 24 hours do a second cleaning MYK LATICRETE India Pvt Ltd.
with normal soap detergent to remove any haze from the 8-2-703/A, Fourth Floor, Leela Gopal Towers,
tile Road No-12, Banjara Hills, Hyderabad – 500034
(T.S.) Tel: +91-40-30413100
* Contact MYK LATICRETE technical services for large E-mail: [email protected]
format tile or stone installations on exterior surfaces.
Website: www.myklaticrete.com

Application:

Shelf Life
Factory sealed containers of this product are guaranteed
to be of first quality for two (2) years if stored at
temperatures >32°F (0°C) and <110°F (43°C).

Limitations
• Light colors may darken slightly from direct UV
exposure.
Consult with Technical Services for specific exterior
grouting recommendations.
• For industrial applications exposed to high
concentrations of food and mineral acids and to high
heat, use LATAPOXY®2000 Industrial Epoxy Grout.
• Maximum stain resistance is achieved 10 days after
installation. Protect from exposure to acids and strong
cleaners during this period.
• Not recommended for soft, polished marble or delicate
glazed tiles.
• Adhesives/mastics, mortars and grouts for ceramic tile,
pavers, brick and stone are not replacements for
waterproof membranes. When a waterproof membrane is
required, use LATICRETE® Hydro ban / 9237 Waterproof
Membrane.

MYKL-TDS- L SP-100 – REV 01; 08/18