ISOS }SE CLEC CECE LS GS SOE SSUES OCS SBE Y Ww AN AMERICAN NATIONAL STANDARD ASME B16.5a-1998 ADDENDA to ASME B16.5-1996 PIPE FLANGES AND FLANGED FITTINGS NPS % Through NPS 24 ‘THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS Three Park Avenue ® New York, NY 10016Date of Issuance: October 26, 1998 ASME is thi cistered trademark of The American Society of Mechanical Engineers ‘This code or standard was developed under procedures accrodited as meeting the criteria for ‘American National Standards. Tho Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concorned interests have had an ‘opportunity to participate. The proposed code or standard was made available for public review land comment that provides an opportunity for addtional public input from industry, academia, fegulatory agencies, and the publicat large. ‘ASME does not “approve,” “rate,” oF “ondorse” any item, construction, proprstary dovioo, of activity [ASME does not take any position with respect tothe validity of any patent rights asserted in conngction with any items mentioned in this document, and does not undertake to insure anyone Utilizing a standard agains liability for infringoment of any applicable Leters Patent, nor assumes ‘any such liability. Users of a code or standard ara exprassly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their ‘own responsibilty. Participation by federal agency representativels) or personts) affliated with industry is nat to be interpreted as government or industry endorsement ofthis code or standard, 'ASME accepts responsiblity for only those interpretations issued in accordance wth gover ASME procedures and policies which preclude the issuance of interpr volunteers. ing ions by individual No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. The American Sociaty of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990 Copyright © 1998 by ‘THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS ‘All Rights Reserved Printed in USABDSG we ss Powe Ss cs 3 a > 9 pew ees SGevlCcvuceclooge ASME B16.5a-1998 Following approval by the ASME B16 Committee and ASME, and after public review, ASME B16.5a- 1998 was approved by the American National Standards Institute on February 20, 1998. ‘Addenda to the 1996 edition of ASME B16.5 are issued in the form of replacement pages. Revision additions, and deletions are incorporated directly into the affected pages. It is advisable, however, that page, the Addenda title and copyright pages, and all replaced pages be retained for reference. SUMMARY OF CHANGES ‘This is the first Addenda to be published to ASME B16.5-1996, Replace or insert the pages listed. Changes given below are identified on the pages by a margin note, (a), pliced next to the affected area. The pages not listed are the reverse sides of the listed pages and contain ‘no changes. Page Location _ ‘ Foreword ASME address updated “i Commitee Roster Updated * Conens Updated ores Aden changes 1 at Inthe third and seventh ies, Annex @ comeced by Eta to read Aner # a Revised 8 7a 2S cometed by Erato ead NPS 9 16 (Overall length for NPS 4 and smaller revised 81 Title corrected by Errata 10-12 Table 1A, (1) A 350 Gr. LF6 Cl. | added to materis (2) R38 Ge LF6 C2 old 6 materi eroup 12 (3) A351 Gr. CE8MN, A 351 Gr. CD4MCu, A351 Gr. CD3MWCuN, A 182 Gr. F55, ‘and A 240 Gr. $32760 added to material ‘group 2.8 (4) New material groups 1.15 and 3.17 added (5) A 351 Gr. CN7M deleted from material ‘group 3.1 (©) General Notes added 15 Table 2-1.1 (1) A 350 Gr. LF6 Cl. 1 added Q) Note (4) added woPage Location Change 16 Table 2-1.2 (1) A350 Gr. LF6 Cl. 2 added (2) Note (3) added. 19 Table 2-1.5 First line of Note (1) corrected by Errata 20 Table 2-1.7 First line of Note (1) corrected by Errata 241 Table 2-1.15 Added 25 Table 2-2.1 ‘Working pressure for Class 600 at 1400°F corrected by Errata to read 90 28 Table 2-24 ‘Working pressure for Class 600 at 1150°F corrected by Errata to reed 475 31 Table 2.2.7 (1) Working pressure for Class 2500 at 400°F corrected by Errata to read 4460 (2) Working pressure for Class 400 at 850°F corrected by Errata to read 570 32 Table 2.2.8 ‘A351 Gr. CE8MN, A 351 Gr. CD4MCu, A 351 Gr. CD3MWCUN, A 182 Gr. FSS, and ‘A240 Gr. $32760 added 3 Table 23.1 Revised in its entirety 35 Table 2-33, Working pressure for Class 600 at 900°F corrected by Errata to read 280 36 Table 23.4 ‘Working pressure for Class 400 at 900°F revised 3 Table 23.5 Working pressure for Class 900 at 800°F corrected by Errata to read 1520 38 Table 23.6 ‘Working pressure for Class 1500 at 750°F corrected by Errata to read 2650 Ey Table 2.3.7 Working pressure for Class 900 at 800°F corrected by Errata to read 1520 40 Table 2.3.8 Working pressure for Class 900 at 800°F corrected by Brrata to read 1520 48 Table 2-3.16 ‘Working pressure for Class 2500 at 1150°F corrected by Errata t0 real 1545 48.1 Table 23.17 ‘Added 53,54 Fig.7 (1) Top left sketch for Classes 150 and 300 revised (2) Top left sketch for Classes 400 and Higher revised n Table 9 In column 10, value for NPS 4 corrected by Errata to read 4.57 84 Table 13, Note (19) renumbered to Note (18) by Errata asUVISV Ses Pee SCE SO UELEYVUON SGtoceceeeceve VY XR Page Location Change 150 Annex H ASME address updated 153 Interpretations ASME address updated SPECIAL NOTE: ‘The Interpretations to ASME B16.5 are included in this Addenda as a separate section for the user's convenience. This section, however, is not part of the Addenda or the edition. io)> revisions. Following approval by the Standards Committee and ASME, approval as an : ‘American National Standard was given by ANSI on October 3, 1996 with the new designation 2 ASME B16.5-1996. ) (a) Requests for interpretations or suggestions for revision should be sent to the Secretary, BI6 Committee, The American Society of Mechanical Engineers, Three Park Avenue, New York, NY 10016-5990. 7 we ECCS Veuve Uee eel Cocos te3 d ~ } 9 9 a 3 > 2 3 > 9 a a 3 3 3 2 €e€vcocevvece WY ASME B16 COMMITTEE (a) ‘Standardization of Valves, Flanges, Fittings, Gaskets, and Valve Actuators (The following isthe roster of the Committe at the time of approval ofthis Standard.) OFFICERS W.N. McLean, Chair R.A. Schmidt, Vice Chair P. A. Reddington, Secretary COMMITTEE PERSONNEL W. L Balls, Consultant, London, Ohio RW. Barnes, Anric Enterprises, Elobicoke, Ontario, Canada national, Inc., Marshalltown, lowa, M.A. Clark, Nibco In. Elkhart, India E. Floren, Mueller Co,, Decatur, Ilinois Ri. Frikken, Monsanto Co, St. Louis, Missouri Henrich, Minnegasco, Inc, Garden Valley, Minnesota JC. Inch, Mueller Refrigeration Products Co., Hartsville, Tennesse A. Jolly Vogt Valve Co., Louisville, Kentucky 1G. Knecht, Consultant, Williamsport, Ponnsylvania 'A. Koester, The William Powell Co., Cincinnati, Ohio 1. N. McLean, Newco Valve Co., Palos Park, linois | L. Nayyar, Bechtel Corp., Gaithersburg, Maryland 'A. Senmict, Lagish Co,, Kusselivle, Arkansas 1 R. Sonderegger, Grinnell Corp., Cranston, Rhode Island. Mi, Stephan, Flexitalic, Inc, Pennsauken, New Jersey _ Stroud, Ductile Iron Research Association, Birmingham, Alabama D. Wasicek, ABS Americas, Houston, Texas ‘White, Richard E. White & Associates, South Bend, Indiana liam, Southern Company Services, irmingham, Alabama Wilis, Dow Chemical Co, Freeport, Texas . Worley, Union Carbide Corp., South Charleston, West Virgin SC QEEAEEDEEreenzoC! BP>r PERSONNEL OF SUBCOMMITTEE C — STEEL FLANGES AND FLANGED FITTINGS D.R.Frikken, Chair, Monsanto Co, St. Louis, Missouri P. A. Reddington, Secretary, ASME International, New York, New York VC. Bhasin, Sigmatech, Pittsburgh, Pennsyivania GD. Conlee, Consultant, St. Louis, Missouri W. C. Farell, Jr, Consultant, Birmingham, Alabama IM. L Henderson, Cofter Corp., Houston, Texas RE. Johnson, Flowline Div., New Castle, Pennsylvania R. Koester, The William Powell Co,, Cincinnati, Ohio R. Madewell,Flo‘Bend, Inc. Sand Springs, Oklahoma W.N, MeLean, Newco Valve Co., Palos Park, Ilinois