CATALOGUE

Products for oil&gas

industry
 CATALOGUE Products for oil&gas industry

Contents
2 Company
8 Innovations
14 Quality Management System
20 Drill bit technology and lease
26 Roller cone drill bits

Company
28 Designation
29 Design features
32 Roller cone drill bits product lines
32 Slimhole
34 SlimholePro
37 Grand
38 GrandPro
40 Motor
44 MotorPro
46 Storm
47 Standart
48 Single
50 Technical information

52 PDC drill bits

54 Designation
55 Design features
57 PDC bits product lines
57 FastDrill
60 smartFastDrill
61 FastDrillMatrix
62 BicentricDrill
63 SideTrack
63 WiperTrip
64 PDC core bits
64 CoreBits
65 Technical information
66 BHA constituent elements
68 Hole-openers
68 Rock bit hole-openers
69 Bladed hole-openers
69 String stabilizers
70 Near-bit stabilizers
www.vbm.ru 71 Subs

72 Contacts

www.vbm.ru
 Volgaburmash. XXI century tools.
Company

Company
Company
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Company

Volgaburmash, JSC was founded in The Company carries out continuous technical modernization of production. Currently, Volgabur-
1948 and is currently the largest and the mash, JSC is equipped with the most advanced multi-axis machining centers, furnaces, heat-
most advanced Russian rock cutting tools treatment machines, welding and hardfacing units purchased from the world’s leading producers.
producing company.

The Company manufactures over

1000 rock bit designs for oil and gas

Company
Company

industr y ranging from 3 3/4” to 26” in

diameter with milled teeth and tungsten Our state of the art equipment enables us to
carbide inserts; over 80 standard sizes master new bit designs in the shortest time and
of mining rock bits ranging from 5 1/8” provides products quality conformance with
to 15 1/2” in diameter for compressed-air the international standards. All Volgaburmash,
drilling in various mining and geological JSC products undergo quality control at each
conditions. Also, Volgaburmash manu- manufacturing stage. Since 1997, the Company
factures over 350 designs of PDC bits has established certified Quality Management
with matrix or steel bodies for various System that meets ISO standards and API
drilling applications ranging from 3 1/4” Q1 specification.
to 17 1/2” in diameter, PDC core bits for
core drilling, stabilizers, string stabilizers
and near-bit stabilizers.

оver 1.5
thousand drill
bit designs

6 www.vbm.ru www.vbm.ru 7
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Company

Volgaburmash, JSC has also imple- Our background of experience,

mented Environment Management System high scientific engineering potential
and Health and Safety Management System and the team of professionals give
according to ISO 14001:2004 and OHSAS Volgaburmash, JSC an excellent op-
18001:2007 requirements. portunity of creating an individual
approach to each customer and de-
Since the Company was founded, Vol- veloping unique drill bit designs for

Company
Company

gaburmash, JSC specialists have developed any drilling applications in the shortest
over 1600 drill bit designs. Many of these
time possible.
design solutions are of international novelty.
Their authors and the Company have obtained

the Company
more than 300 inventor’s certificates and
patents for inventions in Russia and 17
other countries. Over fifteen hundred in-
novations have been put into production.

has manufactured
over 8.5 million drill bits

Since its foundation, the Company has produced more

than 8.5 million drill bits for oil and gas and mining indus-
tries. The quality of the products and the sales volume make
Volgaburmash, JSC one of the world’s leading rock-cutting
tools manufacturers. Rock-cutting tools produced by Vol-
gaburmash, JSC are used in the main Russian fields and
in more than 40 other countries.

8 www.vbm.ru www.vbm.ru 9
 Volgaburmash. XXI century practices.
Innovations

Company
Company
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Innovations

The base of the Company development Having its proprietary patented technical research
is working out and introducing innovation and software developments enables Volgaburmash,
technologies in all aspects of its activities JSC to manufacture highly competitive drill bits
providing high product quality level: in design modified for customer specific applications.
engineering, manufacturing technology and
after-sales service.

introducing
Volgaburmash, JSC has worked out a

Company
Company

successful thorough system of automated

design engineering, technology process plan-
ning and engineering evaluation (CAD/CAM/

innovation
CAE-system) based on the unified environment
of Siemens UG NX software system that is
widely used by the world’s leading companies.
Design engineering system incorporates

technologies
patented research results, math model simula-
tion, selecting the optimal drill bit design param-
eters and multi-factor analysis of bit test results.

Design engineers have at their disposal a software for automated drawing of a bit profile
and bottom-hole coverage pattern, dull bit grading, selection of optimal hydraulics, load balanc-
in all aspects
of business
ing for improving bit steerability, as well as field test performance analysis by means of advanced
statistical data processing methods.

12 www.vbm.ru www.vbm.ru 13
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Innovations

Manufacturing technology upgrading includes the selection of the optimal manufacturing

The Company monitors its products equipment, improvement of technical processes, production modes as well as choosing new
quality at all stages of their life cycle to materials with improved characteristics.
suppor t operational decision making re-
lated to improvement of design parameters
and manufacturing technology.
D e sign e ngine er ing and products
A team of highly skilled specialists manufacturing are fulfilled according to an

Company
Company

works out and implements innovations in individual arrangement for a particular cus-
cooperation with scientific and research tomer, taking into account customer equip-
organizations. ment and field lithology. Currently, Volga-
burmash, JSC specialists can design and
manufacture drilling tools of any complexity
and modify bit design depending on the
drilling application.

from  scientific  research All Volgaburmash, JSC innovations are

targeted at fulfillment of Quality Policy, which
means maximum satisfaction of customer’s

results to the math model,

requirements and expectations and creat-
ing their conf idence in the Company’s
product.

manufacturing and improvement

14 www.vbm.ru www.vbm.ru 15
 Volgaburmash. XXI century quality.
Quality
Management
System

Company
Company
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Quality Management System

Volgaburmash, JSC has implemented, A special place in the Quality Management System is traditionally and justly held by product
certified and maintains Quality Management quality control. Highly qualified personnel of Manufacturing Engineering Support and Technical
System (QMS), that meets the requirements Control departments, a number of high technology laboratories and services ensure undeviating
of the International Standards ISO 9001 filling product requirements that have been set before Volgaburmash, JSC for many decades.
and ANSI/API Spec.Q1.

Also, the Company has implemented

quality regulates

Company
Company

ISO 14001 Standard (Environment Manage-

ment System) and British National Standard

all Company’s processes

BS-OHSAS 18001 (Health and Safety Man-
agement System).

The main strategic aim of Volgaburmash, JSC — the quality — regulates all Company’s pro-
cesses — management, production and marketing processes — starting with development of new
bit designs to satisfy customer requirements and finishing with the delivery of the finished products
to the consumer.

18 www.vbm.ru www.vbm.ru 19
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Quality Management System

Advanced and constantly brought up to date equipment of the

Company’s laboratories and services guarantees quality control and
assessment level meeting the International Standards as far as design
solutions, materials, component parts and manufacturing processes.

From chemical analysis of highly complex materials, structural

study, identification of grade, grain size, plating thickness  — to opera­

Company
tional control in express laboratories and modification of techno­logy
Company

processes of powder metallurgy, industrial rubber articles, chemical

and heat treatment of bit component parts — this is by no means the
complete list of methods and processes that are successfully carried
out for the purposes of product quality control.

from structural study to

modification of technology

The Central Laboratory and Metrology

Service of Volgaburmash, JSC are accredited
and certified by the Federal Agency for Techni-
cal Regulation and Metrology (ROSSTANDART)
which is an official confirmation of the Com-
pany’s conformity to technical regulations and
compulsory standard requirements.

20 www.vbm.ru www.vbm.ru 21
 Volgaburmash. XXI century service.
Drill Bits
Technology
and Lease

Company
Company
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Drill Bits Technology and Lease

Volgaburmash, JSC renders engineering services for well construction, for this
purpose the Company established its own Drill Bit Services Department. It ensures
the customers get maximum bit performance by means of proper bit selection and
constant control of drilling parameters. Moreover, a direct “manufacturer — customer”
relationship allows Volgaburmash to respond promptly and modify drill bits for a
given application.
Main advantages of Volgaburmash drill bit service:

Company
Company

• Highly qualified and experienced service personnel, comprehensive information

on new bit designs and bit features, bit wear and bit performance help lower
the risks and achieve maximum performance;
• Payment is made on the basis of actual meters drilled. It allows the Customer
to accurately plan well construction expenses and to minimize financial risks;
• Storage and transportation costs are eliminated;
• Number of drilling personnel and technological service experts is lowered.

drilling efficiency, drill

bit technology, drill bit upgrading

24 www.vbm.ru www.vbm.ru 25
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Drill Bits Technology and Lease

Volgaburmash, JSC Service Dept. also

renders bit lease services. Unlike after-sales
service, bit lease does not involve Volgaburmash,
JSC engineers in the drilling process which ad-
ditionally saves money and makes it possible to

Company
Company

estimate the expenses connected with rock

cutting tools in advance.

Specialists of oil&gas and service companies

upgrade their qualification in Volgaburmash, JSC’
Training Center. During practical and consulting
seminars the specialists study peculiarities of
conventional and new bit designs, get hand-on
experience of selecting optimal drilling parameters
as well as dull bit evaluation skills. Personnel
training will help companies incorporate more
efficiency in their drilling operations and reduce
costs associated with improper selection and
use of drill bits.

26 www.vbm.ru www.vbm.ru 27
 Volgaburmash. XXI century tool.
Roller Cone
Drill Bits

Company
Company

Roller Cone Drill Bits

 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Designation Roller Cone Bits Design Features

8 1/2
Diameter, in Product line IADC code Design

Central mud circulation Combined mud circulation Extended nozzles

Roller Cone Drill Bits

Roller Cone Drill Bits

Leg protection with
Shirttail and leg leading Enhanced shirttail Leg protection TCI cutters, shirttail
edge hardfacing hardfacing with TCI cutters protection with
diamond cutters

Stabilization pad Stabilization pad

Mud blade with diamond cutters
with TCI cutters

30 www.vbm.ru www.vbm.ru 31
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Design Features

Single gauge Double gauge

of diamond compacts of diamond compacts

Chisel inserts Conical inserts

Roller Cone Drill Bits

Roller Cone Drill Bits

Near gauge row (reamers) Diamond compacts
in the near gauge row

Other shape Enhanced steel

inserts teeth hardfacing

Enhanced Enhanced heel row

heel row with diamond compacts

Single gauge Double gauge

of tungsten carbide of tungsten carbide
compacts compacts
Energy balanced
cutting structure

32 www.vbm.ru www.vbm.ru 33
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

Slimhole
Drill bits with sealed bearing for drilling small
Shirttail and
diameter wells (less than 6 3/4”). Slimhole bits leg protection
are ideal to drill for liner.
In Slimhole bits, both friction and roller bear- Shirttail or shirttail and leg lead-
ings can be used. In friction bearings, antifric- ing edge are hardfaced and may have
tion wear-resistant materials and silver coating tungsten carbide inserts.
are used.

Shirttail and leg leading Leg protection with

edge hardfacing tungsten carbide inserts

Cutting structure
Slimhole Product Line
This product line may have either milled teeth
Bit diameter Connecting thread Weight,
or TCI. To increase bit life, steel teeth are Bit designation IADC code
hardfaced with wear-resistant tungsten carbide mm in GOST API kg
based material. Depending on the rock hard-
Roller Cone Drill Bits

Roller Cone Drill Bits

SLH117 (R967) 117 pin З-66 2 3/8 Reg 5,5
ness, either side surfaces or side and end 95,3 3 3/4
SLH637 (R906) 637Y pin З-66 2 3/8 Reg 4,0
surfaces of steel teeth are hardfaced.
SLH117 (R966) 117 pin З-66 2 3/8 Reg 6,0
The gauge may be protected with tungsten SLH135 (R757) 135 pin З-66 2 3/8 Reg 6,0
carbide inserts. For additional protection against
SLH137 (R978) 137 pin З-66 2 3/8 Reg 6,0
Steel teeth bit gauge loss, a near gauge of tungsten carbide
4 1/8 SLH215 (R870) inserts may be used. 104,8 4 1/8 SLH214 (R871) 214 pin З-66 2 3/8 Reg 6,0
SLH215 (R870) 215 pin З-66 2 3/8 Reg 6,0

Lubrication system SLH517 (R541) 517X pin З-66 2 3/8 Reg 5,0
SLH537 (R944) 537X pin З-66 2 3/8 Reg 6,0
Bit lubrication system is designed to com- 517X pin З-66 2 3/8 Reg 6,0
108,0 4 1/4 SLH517 (R542)
pensate grease consumption and pressure
during long-term operation. It consists of a 117,5 4 5/8 SLH214 (R2068) 214 pin З-76 2 7/8 Reg 9,0
grease reservoir with a rigidly mounted cap, a 139,7 5 1/2 SLH547 (R2042) 547X pin З-76 2 7/8 Reg 13,5
flexible diaphragm, a metal canister protecting 134 pin З-88 3 1/2 Reg 15,0
SLH134 (R975)
the diaphragm from breakage, and channels to 149,2 5 7/8
connect the grease reservoir with friction areas SLH214 (R764) 214 pin З-88 3 1/2 Reg 15,0
in bearings. 152,4 6 SLH215 (R850) 215 pin З-88 3 1/2 Reg 16,0
SLH135 (R753) 135 pin З-88 3 1/2 Reg 17.0
155,6 6 1/8
SLH215 (R861) 215 pin З-88 3 1/2 Reg 15,6
SLH127 (R186) 127 pin З-88 3 1/2 Reg 16,0
158,7 6 1/4 SLH517 (R145) 517X pin З-88 3 1/2 Reg 17,0
SLH537 (R147) 537X pin З-88 3 1/2 Reg 17,0
SLH126 (R98) 126 pin З-88 3 1/2 Reg 17,0
161,0 6 11/32
SLH517 (R94) 517X pin З-88 3 1/2 Reg 18,0
SLH537 (R144) 537X pin З-88 3 1/2 Reg 19,0
165,1 6 1/2
SLH817 (R148) 817Y pin З-88 3 1/2 Reg 20,0
TCI bit SLH517 (R151) 517X pin З-88 3 1/2 Reg 22,0
4 1/4 SLH517 (R542) 171,4 6 3/4
SLH537 (R152) 537X pin З-88 3 1/2 Reg 22,0

34 www.vbm.ru www.vbm.ru 35
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

SlimholePro
Small diameter bits (less than 6 3/4”) with pre-
Lubrication system
Bit lubrication system is designed to com-
mium sealed bearing. Designing the bits of this
pensate grease consumption and pressure
product line involves advanced knowledge-inten-
sive technologies and engineering analysis in the
state of the art software systems. High bit perfor-
mance is achieved due to high-quality materials,
using improved reliability bearings, most recent during long-term operation. It consists of a grease reservoir with a rigidly mounted cap, a flexible
bit body protection systems and optimum cutting diaphragm, a metal canister protecting the diaphragm from breakage, and channels to connect the
structure layout. This bit type is ideal for horizon- grease reservoir with friction areas in bearings.
tal drilling. SlimholePro bits use friction bearings
with constituent parts made of antifriction wear-
resistant material with silver coating as well as
elastomer coating to improve wear characteristics.

Shirttail and leg protection

SlimholePro bits have improved protection against gauge loss. Gauge
rows have maximum number of tungsten carbide inserts. Legs have ad-
ditional stabilization pads.
Roller Cone Drill Bits

Roller Cone Drill Bits

Cutting structure
TCI bit This product line may have either milled
SlimholePro Product Line
6 1/2 SLHP547 (R496) teeth or TCI. Cutting structure designed with Diameter Connecting thread Weight,
advanced software systems provides effective Bit designation IADC code
mm in GOST API kg
drilling of any rock type and prolongs bit life.
To increase steel teeth life, a patented mate- 114,3 4 1/2 SLHP136 (R2001) 136 pin З-66 2 3/8 Reg 7,0
rial is used that consists of a mixture of SLHP117 (R557) 117 pin З-76 2 7/8 Reg 7,6
spherical cast tungsten carbide and small SLHP437 (R885) 437Х pin З-76 2 7/8 Reg 7,8
120,6 4 3/4
hard-alloy grains. Depending on the rock hard- SLHP517 (R218) 517X pin З-76 2 7/8 Reg 8,0
ness, either side surfaces or side and end SLHP547 (R928) 547X pin З-76 2 7/8 Reg 9,5
surfaces of steel teeth are hardfaced. The SLHP117 (R891) 117 pin З-76 2 7/8 Reg 10,5
gauge may be protected with tungsten carbide SLHP517 (R959) 517Х pin З-76 2 7/8 Reg 11,2
124,0 4 7/8
inserts. For additional protection against gauge SLHP547 (R881) 547Х pin З-76 2 7/8 Reg 11,2
loss, a near gauge of tungsten carbide inserts SLHP627 (R960) 627Y pin З-76 2 7/8 Reg 9,4
may be used. 126,0 4 31/32 SLHP117 (R965) 117 pin З-76 2 7/8 Reg 10,8
127,0 5 SLHP527 (R809) 527Х pin З-76 2 7/8 Reg 11,2
The gauge and the near gauge rows may 130,2 5 1/8 SLHP117 (R943) 117 pin З-88 3 1/2 Reg 8,5
include diamond-coated tungsten carbide in-
SLHP216 (R223) 216 pin З-88 3 1/2 Reg 13,5
serts. Depending on the application, these
SLHP447 (R507) 447X pin З-88 3 1/2 Reg 13,5
inserts may come up to 30%, 50% or 100% of 139,7 5 1/2
SLHP547 (R923) 547X pin З-88 3 1/2 Reg 13,5
the total amount of inserts.
SLHP637 (R876) 637Y pin З-88 3 1/2 Reg 13,5
SLHP117 (R558) 117 pin З-88 3 1/2 Reg 14,0
SLHP437 (R409) 437X pin З-88 3 1/2 Reg 14,0
SLHP517 (R538) 517X pin З-88 3 1/2 Reg 14,0
142,9 5 5/8
SLHP547 (R579) 547X pin З-76 2 7/8 Reg 13,2
SLHP547 (R961) 547X pin З-88 3 1/2 Reg 13,0
SLHP627 (R922) 627X pin З-88 3 1/2 Reg 14,0
Steel teeth bit
6 1/2 SLHP127 (R550) SLHP547 (R882) 547Х pin З-88 3 1/2 Reg 13,7
143,9 5 2/3
SLHP627 (R893) 627Х pin З-88 3 1/2 Reg 14,0

36 www.vbm.ru www.vbm.ru 37
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

SlimholePro Product Line

Grand
Diameter Connecting thread Weight, Large diameter bits (over 15 1/2”) with open bear-
Bit designation IADC code ings are designed for drilling upper well sections
mm in GOST API kg
(surface hole drilling). Without sealing elements
SLHP547 (R296) 547Y pin З-88 3 1/2 Reg 15,0
146,0 5 3/4 in the bearing, it is possible to maximize the
SLHP627 (R949) 627X pin З-88 3 1/2 Reg 13,6 journal and the rollers dimensions and to achieve
SLHP117 (R585) 117 pin З-88 3 1/2 Reg 14,0 full circulation in the bearing which is highly
SLHP137 (R977) 137 pin З-88 3 1/2 Reg 15,0 important as it helps reduction of the torque,
SLHP217 (R474) 217 pin З-88 3 1/2 Reg 14,0 providing quick cooling action and increasing
SLHP437 (R805) 437X pin З-88 3 1/2 Reg 15,0 bearing life.
SLHP447 (R577) 447X pin З-88 3 1/2 Reg 15,0
149,2 5 7/8 SLHP517 (R495) 517X pin З-88 3 1/2 Reg 15,0
SLHP527 (R955) 527X pin З-88 3 1/2 Reg 15,0
SLHP537 (R485) 537X pin З-88 3 1/2 Reg 15,0 Cutting structure
SLHP547 (R877) 547Х pin З-88 3 1/2 Reg 15,0 This product line may have either milled teeth
SLHP617 (R497) 617Х pin З-88 3 1/2 Reg 15,0 or TCI. To increase steel teeth life, steel teeth are
SLHP637 (R435) 637Y pin З-88 3 1/2 Reg 14,0 hardfaced with wear-resistant tungsten carbide
151,0 5 15/16 SLHP217 (R586) 217 pin З-88 3 1/2 Reg 14,0 based material. Depending on the rock hardness,
either side surfaces or side and end surfaces of steel
Roller Cone Drill Bits

Roller Cone Drill Bits

SLHP117 (R591) 117 pin З-88 3 1/2 Reg 14,0 Steel teeth bit
SLHP127 (R910) 127 pin З-88 3 1/2 Reg 13,7 19 19/64 GRD213 (R216)
teeth are hardfaced. The gauge may be protected
with tungsten carbide inserts. For additional protec-
SLHP137 (R878) 137 pin З-88 3 1/2 Reg 13,7
tion against gauge loss, a near gauge of tungsten
SLHP217 (R570) 217 pin З-88 3 1/2 Reg 14,0
carbide inserts may be used.
SLHP417 (R411) 417X pin З-88 3 1/2 Reg 15,0
437X pin З-88 3 1/2 Reg 16,0
152,4 6
SLHP437 (R811)
SLHP447 (R592) 447X pin З-88 3 1/2 Reg 15,0
Shirttail and leg
SLHP517 (R934) 517X pin З-88 3 1/2 Reg 16,0 protection
SLHP537 (R948) 537X pin З-88 3 1/2 Reg 16,0 Shirttail is hardfaced along its leading edge.
SLHP547 (R416) 547Y pin З-88 3 1/2 Reg 15,0
SLHP617 (R480) 617X pin З-88 3 1/2 Reg 16,0
SLHP627 (R939) 627Y pin З-88 3 1/2 Reg 16,0
SLHP637 (R481) 637Y pin З-88 3 1/2 Reg 16,0
SLHP117 (R887) 117 pin З-88 3 1/2 Reg 17,0
SLHP217 (R465) 217 pin З-88 3 1/2 Reg 16,0
SLHP437 (R867) 437X pin З-88 3 1/2 Reg 16,1
SLHP447 (R909) 447X pin З-88 3 1/2 Reg 17,0
SLHP517 (R450) 517X pin З-88 3 1/2 Reg 17,0 Grand Product Line
155,6 6 1/8 SLHP527 (R455) 527Y pin З-88 3 1/2 Reg 16,0 Diameter Connecting thread Weight,
SLHP537 (R847) 537X pin З-88 3 1/2 Reg 17,0 Bit designation IADC code
mm in GOST API kg
SLHP547 (R892) 547X pin З-88 3 1/2 Reg 16,1
393,7 15 1/2 GRD111 (R970) 111 pin З-177 7 5/8 Reg 180,0
SLHP617 (R964) 617X pin З-88 3 1/2 Reg 17,0
GRD211 (R971) 211 pin З-177 7 5/8 Reg 180,0
SLHP627 (R890) 627X pin З-88 3 1/2 Reg 17,0
GRD111 (R211) 111 pin З-177 7 5/8 Reg 235,0
SLHP637 (R456) 637Y pin З-88 3 1/2 Reg 17,0 444,5 17 1/2
GRD113 (R130) 113 pin З-177 7 5/8 Reg 240,0
SLHP127 (R550) 127 pin З-88 3 1/2 Reg 20,0
GRD311 (R972) 311 pin З-177 7 5/8 Reg 235,0
SLHP217 (R994) 217 pin З-88 3 1/2 Reg 20,0 GRD111 (R215) 111 pin З-177 7 5/8 Regv 300,0
165,1 SLHP517 (R499) 517X pin З-88 3 1/2 Reg 19,0 GRD213 (R216) 213 pin З-177 7 5/8 Reg 290,0
6 1/2 490,0 19 19/64
SLHP547 (R496) 547Y pin З-88 3 1/2 Reg 23,0 GRD111 (R213) 111 pin З-177 7 5/8 Reg 320,0
SLHP637 (R500) 637Y pin З-88 3 1/2 Reg 19,0 GRD111 (R633) 111 pin З-177 7 5/8 Reg 630,0
SLHP837 (R521) 837Z pin З-88 3 1/2 Reg 23,0 508,0 20 GRD121 (R636) 121 pin З-177 7 5/8 Reg 660,0
171,4 6 3/4 SLHP117 (R936) 117 pin З-88 3 1/2 Reg 18,0 660.4 26 GRD131 (R658) 131 pin З-177 7 5/8 Reg 660,0

38 www.vbm.ru www.vbm.ru 39
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

GrandPro GrandPro Product Line

Large diameter bits (over 15 1/2”) with premium
Diameter Connecting thread Weight,
sealed bearing designed for multiple drilling of up- Bit designation IADC code
per sections (surface hole drilling), they have in- mm in GOST API kg
creased bit life during forced drilling practices. GRDP115 (R905) 115 pin З-177 7 5/8 Reg 170,0
GrandPro Line may have both friction and roller GRDP117 (R897) 117 pin З-177 7 5/8 Reg 170,0
bearings. The friction bearings have constituent GRDP127 (R987) 127 pin З-177 7 5/8 Reg 172,0
parts made of antifriction wear-resistant material GRDP135 (R732) 135 pin З-177 7 5/8 Reg 180,0
with silver coating to increase bearing life. GRDP137 (R988) 137 pin З-177 7 5/8 Reg 180,0
393,7 15 1/2
GRDP215 (R167) 215 pin З-177 7 5/8 Reg 187,0
GRDP217 (R989) 217 pin З-177 7 5/8 Reg 180,0
GRDP235 (R2000) 235 pin З-177 7 5/8 Reg 180,0
GRDP545 (R174) 545X pin З-177 7 5/8 Reg 170,0
GRDP625 (R326) 625X pin З-177 7 5/8 Reg 180,0
TCI bit Cutting structure GRDP115 (R559) 115 pin З-177 7 5/8 Reg 200,0
26 GRDP515 (R560)
GRDP135 (R556) 135 pin З-177 7 5/8 Reg 190,0
This product line may have either milled teeth
GRDP215 (R940) 215 pin З-177 7 5/8 Reg 200,0
or TCI. Cutting structure designed with advanced
software systems provides effective drilling of any 406,4 16 GRDP415 (R555) 415X pin З-177 7 5/8 Reg 200,0
rock type and prolongs bit life. To increase steel teeth GRDP435 (R571) 435X pin З-177 7 5/8 Reg 200,0
Roller Cone Drill Bits

Roller Cone Drill Bits

life, a patented material is used that consists of a GRDP437 (R935) 437X pin З-177 7 5/8 Reg 200,0
mixture of spherical cast tungsten carbide and small GRDP535 (R937) 535X pin З-177 7 5/8 Reg 200,0
hard-alloy grains. Depending on the rock hardness, GRDP115 (R832) 115 pin З-177 7 5/8 Reg 205,0
either side surfaces or side and end surfaces of steel 431,8 17
GRDP117 (R842) 117 pin З-177 7 5/8 Reg 205,0
teeth are hardfaced. The gauge may be protected with GRDP115 (R477) 115 pin З-177 7 5/8 Reg 235,0
tungsten carbide inserts. For additional protection
GRDP117 (R828) 117 pin З-177 7 5/8 Reg 235,0
against gauge loss, a near gauge of tungsten carbide
inserts may be used. GRDP127 (R911) 127 pin З-177 7 5/8 Reg 235,0
GRDP135 (R418) 135 pin З-177 7 5/8 Reg 235,0
The gauge and the near gauge rows may include
GRDP137 (R543) 137 pin З-177 7 5/8 Reg 235,0
diamond-coated tungsten carbide inserts. Depending
on the application, these inserts may come up to GRDP215 (R566) 215 pin З-177 7 5/8 Reg 230,0
Steel teeth bit 30%, 50% or 100% of the total amount of inserts. GRDP217 (R990) 217 pin З-177 7 5/8 Reg 240,0
17 1/2 GRDP117 (R828) GRDP415 (R421) 415Z pin З-177 7 5/8 Reg 245,0
Lubrication system 444,5 17 1/2
GRDP417 (R904) 417Z pin З-177 7 5/8 Reg 252,0
GRDP425 (R493) 425X pin З-177 7 5/8 Reg 250,0
Bit lubrication system is designed to compensate GRDP435 (R421) 435Z pin З-177 7 5/8 Reg 245,0
grease consumption and pressure during long-term GRDP437 (R486) 437Z pin З-177 7 5/8 Reg 252,0
operation. It consists of a grease reservoir with a GRDP445 (R863) 445Z pin З-177 7 5/8 Reg 252,0
rigidly mounted cap, a flexible diaphragm, a metal GRDP515 (R445) 515X pin З-177 7 5/8 Reg 244,0
canister protecting the diaphragm from breakage, GRDP517 (R379) 517X pin З-177 7 5/8 Reg 255/0
and channels to connect the grease reservoir with
GRDP535 (R168) 535X pin З-177 7 5/8 Reg 235,0
friction areas in bearings.
GRDP537 (R378) 537X pin З-177 7 5/8 Reg 235,0
GRDP545 (R242) 545Z pin З-177 7 5/8 Reg 270,0
Shirttail and leg protection GRDP115 (R855) 115 pin З-177 7 5/8 Reg 250,0
Shirttail and leg leading edge are hardfaced GRDP125 (R858) 125 pin З-177 7 5/8 Reg 255,0
469,9 18 1/2
and may be protected with tungsten carbide or dia- GRDP135 (R860) 135 pin З-177 7 5/8 Reg 260,0
mond inserts or a combination of tungsten carbide GRDP215 (R859) 215 pin З-177 7 5/8 Reg 260,0
and diamond inserts. Bits may have stabilization GRDP115 (R682) 115 pin З-177 7 5/8 Reg 290,0
490,0 19 19/64
features. GRDP545 (R698) 545Z pin З-177 7 5/8 Reg 290,0
GRDP115 (R552) 114 pin З-177 7 5/8 Reg 630,0
GRDP135 (R653) 135 pin З-177 7 5/8 Reg 620,0
660,4 26
GRDP215 (R650) 215 pin З-177 7 5/8 Reg 693,0
GRDP515 (R560) 515X pin З-177 7 5/8 Reg 680,0

40 www.vbm.ru www.vbm.ru 41
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

Motor Motor Product Line

Drill bits with sealed bearing are designed for a wide range of applications and give high Diameter Connecting thread Weight,
performance due to the use of improved reliability bearings, advanced bit body protection Bit designation IADC code
mm in GOST API kg
system and optimal cutting structure.
Motor bits can have both friction and roller bearings. The friction bearings use antifriction MTR117 (R837) 117 pin З-117  4 1/2 Reg 27,8
wear-resistant material with silver coating. MTR127 (R65) 127 pin З-117  4 1/2 Reg 28,0
MTR137 (R506) 137 pin З-117  4 1/2 Reg 28,0
MTR214 (R55) 214 pin З-117  4 1/2 Reg 28,0
MTR217(R508) 217 pin З-117  4 1/2 Reg 27,3
MTR314 (R25) 314 pin З-117  4 1/2 Reg 26,0
Cutting structure 190,5 7 1/2 MTR437 (R91) 437Х pin З-117  4 1/2 Reg 28,7
MTR517 (R494) 517X pin З-117  4 1/2 Reg 30,0
This product line may have either milled teeth MTR537 (R24) 537X pin З-117  4 1/2 Reg 30,0
or TCI. To increase steel teeth life, steel teeth are
MTR547 (R553) 547X pin З-117  4 1/2 Reg 29,5
hardfaced with wear-resistant tungsten carbide
based material. Depending on the rock hardness, MTR625 (R29) 625X pin З-117  4 1/2 Reg 30,0
either side surfaces or side and end surfaces of MTR627 (R60) 627X pin З-117  4 1/2 Reg 33,0
steel teeth are hardfaced. The gauge may be pro- MTR757 (R33) 747Y pin З-117  4 1/2 Reg 30,0
Roller Cone Drill Bits

Roller Cone Drill Bits

tected with tungsten carbide inserts. For addi- MTR117 (R567) 117 pin З-117  4 1/2 Reg 28,0
tional protection against gauge loss, a near gauge MTR417 (R846) 417X pin З-117  4 1/2 Reg 33,0
of tungsten carbide inserts may be used.
MTR437 (R803) 437X pin З-117  4 1/2 Reg 33,0
MTR517 (R405) 517X pin З-117  4 1/2 Reg 31,0
Lubrication system MTR527 (R512) 527Y pin З-117  4 1/2 Reg 33,0
200,0 7 7/8
Bit lubrication system is designed to com- MTR537 (R532) 537Y pin З-117  4 1/2 Reg 32,0
pensate grease consumption and pressure during MTR547 (R514) 547Y pin З-117  4 1/2 Reg 33,0
long-term operation. It consists of a grease reser- MTR627 (R529) 627Y pin З-117  4 1/2 Reg 33,0
TCI bit voir with a rigidly mounted cap, a flexible diaphragm, MTR637 (R513) 637Y pin З-117  4 1/2 Reg 33,0
8 1/2 MTR435 (R206) a metal canister protecting the diaphragm from MTR817 (R149) 817Y pin З-117  4 1/2 Reg 33,0
breakage, and channels to connect the grease
MTR215 (R851) 215 pin З-117  4 1/2 Reg 33,0
reservoir with friction areas in bearings.
MTR217 (R464) 217 pin З-117  4 1/2 Reg 33,0
212,7 8 3/8 MTR435 (R471) 435X pin З-117  4 1/2 Reg 35,0
Shirttail and leg protection MTR515 (R478) 515X pin З-117  4 1/2 Reg 35,0
MTR547 (R476) 547X pin З-117  4 1/2 Reg 36,0
Shirttail and leg leading edge are hardfaced
and may be protected with tungsten carbide or MTR114 (R848) 114 pin З-117  4 1/2 Reg 34,0
diamond inserts or a combination of tungsten MTR117 (R443) 117 pin З-117  4 1/2 Reg 33,0
carbide and diamond inserts. MTR125 (R199) 125 pin З-117  4 1/2 Reg 35,0
MTR135 (R184) 135 pin З-117  4 1/2 Reg 35,0
MTR214 (R190) 214 pin З-117  4 1/2 Reg 35,0
MTR215 (R501) 215 pin З-117  4 1/2 Reg 33,3
MTR217 (R454) 217 pin З-117  4 1/2 Reg 35,0
215,9 8 1/2
MTR315 (R962) 315 pin З-117  4 1/2 Reg 36,0
MTR417 (R587) 417X pin З-117  4 1/2 Reg 34,9
MTR427 (R598) 427X pin З-117  4 1/2 Reg 36,0
MTR435 (R206) 435Z pin З-117  4 1/2 Reg 37,0
MTR545 (R816) 545X pin З-117  4 1/2 Reg 36,0
Steel teeth bit
MTR547 (R584) 547Y pin З-117  4 1/2 Reg 37,0
8 1/2 MTR215 (R501)
MTR625 (R810) 625X pin З-117  4 1/2 Reg 36,0

42 www.vbm.ru www.vbm.ru 43
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

Motor
Motor Product Line Motor Product Line
Diameter Connecting thread Weight, Diameter Connecting thread Weight,
Bit designation IADC code Bit designation IADC code
mm in GOST API kg mm in GOST API kg
219,1 8 5/8 MTR437 (R840) 437X pin З-117  4 1/2 Reg 37,0 MTR115 (R380) 115 pin З-152  6 5/8 Reg 78,0
220,7 8 11/16 MTR435 (R844) 435Z pin З-117  4 1/2 Reg 37,0 MTR117 (R564) 117 pin З-152  6 5/8 Reg 78,0
MTR117 (R219) 117 pin З-117  4 1/2 Reg 35,0 279,4 11  MTR527 (R545) 527Y pin З-152  6 5/8 Reg 79,0
MTR215 (R821) 215 pin З-117  4 1/2 Reg 35,0 MTR547 (R547) 547Y pin З-152  6 5/8 Reg 79,0
MTR417 (R872) 417X pin З-117  4 1/2 Reg 38,0 MTR837 (R581) 837Y pin З-152  6 5/8 Reg 80,0
222,3 8 3/4 MTR124 (R85) 124 pin З-152  6 5/8 Reg 92,0
MTR435 (R516) 435Z pin З-117  4 1/2 Reg 38,0
MTR214 (R58) 214 pin З-152  6 5/8 Reg 80,0
MTR547 (R536) 547Y pin З-117  4 1/2 Reg 37,0
MTR217 (R588) 217 pin З-152  6 5/8 Reg 79,2
MTR627 (R535) 627Y pin З-117  4 1/2 Reg 38,0
MTR236 (R996) 236 pin З-152  6 5/8 Reg 85,0
MTR117 (R2004) 117 pin З-152  6 5/8 Reg 56,0
241,3 9 1/2 MTR337 (R593) 337 pin З-152  6 5/8 Reg 84,0
MTR537 (R827) 537X pin З-152  6 5/8 Reg 58,0 295,3 11 5/8 MTR435 (R77) 435X pin З-152  6 5/8 Reg 92,0
Roller Cone Drill Bits

Roller Cone Drill Bits

MTR117 (R446) 117 pin З-152  6 5/8 Reg 55,0 MTR535 (R201) 535X pin З-152  6 5/8 Reg 86,3
MTR437 (R444) 437X pin З-152  6 5/8 Reg 56,0 MTR537 (R596) 537X pin З-152  6 5/8 Reg 88,0
244,5 9 5/8
MTR535 (R12) 535X pin З-152  6 5/8 Reg 58,0 MTR545 (R23) 545X pin З-152  6 5/8 Reg 85,0
MTR545 (R17) 545X pin З-152  6 5/8 Reg 58,0 MTR625 (R57) 625X pin З-152  6 5/8 Reg 90,0
MTR114 (R135) 114 pin З-152  6 5/8 Reg 57,0 MTR627 (R438) 627Y pin З-152  6 5/8 Reg 90,0
MTR126 (R143) 126 pin З-152  6 5/8 Reg 62,0 304,8 12 MTR115 (R941) 115 pin З-152  6 5/8 Reg 90,0
MTR134 (R142) 134 pin З-152  6 5/8 Reg 58,0 MTR115 (R193) 115 pin З-152  6 5/8 Reg 85,0
MTR125 (R853) 125 pin З-152  6 5/8 Reg 88,0
MTR417 (R518) 417X pin З-152  6 5/8 Reg 60,5
MTR135 (R339) 135 pin З-152  6 5/8 Reg 82,0
MTR517 (R132) 517X pin З-152  6 5/8 Reg 62,0
250,8 9 7/8 MTR137 (R540) 137 pin З-152  6 5/8 Reg 90,0
MTR535 (R460) 535X pin З-152  6 5/8 Reg 59,2
MTR215 (R338) 215 pin З-152  6 5/8 Reg 82,2
MTR537 (R131) 537X pin З-152  6 5/8 Reg 62,0
MTR217 (R505) 217 pin З-152  6 5/8 Reg 90,0
MTR617 (R154) 617X pin З-152  6 5/8 Reg 64,0
MTR415 (R467) 415X pin З-152  6 5/8 Reg 92,0
MTR637 (R156) 637Y pin З-152  6 5/8 Reg 64,0 MTR417 (R599) 417X pin З-152  6 5/8 Reg 100,0
MTR737 (R150) 737Y pin З-152  6 5/8 Reg 64,0 311,1 12 1/4 MTR427 (R826) 427X pin З-152  6 5/8 Reg 97,0
MTR117 (R835) 117 pin З-152  6 5/8 Reg 67,0 MTR435 (R461) 435X pin З-152  6 5/8 Reg 89,8
MTR127 (R992) 127 pin З-152  6 5/8 Reg 68,0 MTR445 (R463) 445X pin З-152  6 5/8 Reg 90,0
MTR137 (R993) 137 pin З-152  6 5/8 Reg 68,0 MTR515 (R2037) 515X pin З-152  6 5/8 Reg 90,0
MTR215 (R856) 215 pin З-152  6 5/8 Reg 72,0 MTR527 (R533) 527Y pin З-152  6 5/8 Reg 96,0
MTR217 (R806) 217 pin З-152  6 5/8 Reg 67,5 MTR535 (R984) 535Х pin З-152  6 5/8 Reg 97,0
MTR437 (R78) 437X pin З-152  6 5/8 Reg 72,0 MTR547 (R561) 547Y pin З-152  6 5/8 Reg 96,0
MTR617 (R562) 617X pin З-152  6 5/8 Reg 96,4
269,9 10 5/8 MTR517 (R483) 517X pin З-152  6 5/8 Reg 72,0
MTR837 (R299) 837Y pin З-152  6 5/8 Reg 95,7
MTR535 (R36) 535X pin З-152  6 5/8 Reg 70,0
349,2 13 3/4 MTR115 (R181) 115 pin З-152  6 5/8 Reg 111,0
MTR537 (R35) 537X pin З-152  6 5/8 Reg 70,0
368,3 14 1/2 MTR117 (R839) 117 vpin З-177  7 5/8 Reg 145,0
MTR545 (R06) 545X pin З-152  6 5/8 Reg 73,0
MTR117 (R831) 117 pin З-177  7 5/8 Reg 130,0
MTR547 (R18) 547X pin З-152  6 5/8 Reg 70,0 374,6 14 3/4
MTR427 (R874) 427X pin З-177  7 5/8 Reg 137,0
MTR627 (R100) 627X pin З-152  6 5/8 Reg 78,0 MTR217 (R2032) 217 pin З-177  7 5/8 Reg 160,0
381,0 15 
MTR745 (R26) 745Y pin З-152  6 5/8 Reg 72,3 MTR837 (R815) 837Y pin З-177  7 5/8 Reg 160,0

44 www.vbm.ru www.vbm.ru 45
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

MotorPro MotorPro Product Line

Diameter Connecting thread Weight,
Drill bits with premium sealed friction bearing are designed for drilling with high WOB and RPM Bit designation IADC code
using downhole hydraulic motor. mm in GOST API kg
Designing the bits of this product line involves advanced knowledge-intensive technologies and MTRP137 (R920) 137 pin З-117  4 1/2 Reg 30,0
engineering analysis in the state of the art software systems. High bit performance is achieved MTRP517 (R933) 517X pin З-117  4 1/2 Reg 33,0
due to using of high-quality materials, improved reliability bearings, most recent bit body protec- 209,6 8 1/4
MTRP537 (R915) 537X pin З-117  4 1/2 Reg 37,0
tion systems and optimum cutting structure layout. This bit type is ideal for horizontal drilling.
MTRP617 (R913) 617X pin З-117  4 1/2 Reg 37,0
MotorPro bits use bearings with constituent parts made of antifriction wear-resistant material
with silver coating as well as elastomer coating to improve wear characteristics. MTRP117 (R896) 117 pin З-117  4 1/2 Reg 35,0
MTRP137 (R925) 137 pin З-117  4 1/2 Reg 35,0
MTRP417 (R946) 417X pin З-117  4 1/2 Reg 35,0
MTRP437 (R947) 437X pin З-117  4 1/2 Reg 35,0
MTRP517 (R862) 517X pin З-117  4 1/2 Reg 37,0
Cutting structure 212,7 8 3/8
MTRP527 (R951) 527X pin З-117  4 1/2 Reg 35,0
MTRP537 (R869) 537X pin З-117  4 1/2 Reg 35,0
This product line may have either milled teeth
or TCI. Cutting structure designed with advanced MTRP627 (R875) 627Y pin З-117  4 1/2 Reg 37,0
software systems provides effective drilling of any MTRP737 (R879) 737Y pin З-117  4 1/2 Reg 37,0
rock type and prolongs bit life. To increase steel MTRP837 (R886) 837Y pin З-117  4 1/2 Reg 37,0
Roller Cone Drill Bits

Roller Cone Drill Bits

teeth life, a patented material is used that consists
of a mixture of spherical cast tungsten carbide MTRP117 (R802) 117 pin З-117  4 1/2 Reg 33,0
and small hard-alloy grains. Depending on the rock MTRP127 (R986) 127 pin З-117  4 1/2 Reg 40,0
hardness, either side surfaces or side and end MTRP137 (R442) 137 pin З-117  4 1/2 Reg 32,9
surfaces of steel teeth are hardfaced. The gauge
may be protected with tungsten carbide inserts. MTRP137 (R917) 137 pin З-117  4 1/2 Reg 33,0
For additional protection against gauge loss, a MTRP437 (R582) 437X pin З-117  4 1/2 Reg 35,0
near gauge of tungsten carbide inserts may be MTRP447 (R807) 447X pin З-117  4 1/2 Reg 36,0
used.
MTRP517 (R902) 517X pin З-117  4 1/2 Reg 35,0
The gauge and the near gauge rows may
include diamond-coated tungsten carbide inserts. 215,9 8 1/2  MTRP527 (R926) 527Х pin З-117  4 1/2 Reg 36,0
TCI bit Depending on the application, these inserts may MTRP537 (R864) 537X pin З-117  4 1/2 Reg 36,0
8 1/2 MTRP737 (R908) come up to 30%, 50% or 100% of the total amount
MTRP617 (R563) 617Х pin З-117  4 1/2 Reg 37,0
of inserts.
MTRP627 (R2059) 627X pin З-117  4 1/2 Reg 37,0
Lubrication system MTRP627 (R590) 627Y pin З-117  4 1/2 Reg 37,0
MTRP637 (R589) 637Y pin З-117  4 1/2 Reg 37,0
Bit lubrication system is designed to compensate MTRP737 (R908) 737Y pin З-117  4 1/2 Reg 37,0
grease consumption and pressure during long-term
operation. It consists of an increased grease reservoir MTRP837 (R912) 837Y pin З-117  4 1/2 Reg 37,0
with a rigidly mounted cap, a flexible diaphragm, a MTRP117 (R931) 117 pin З-152  6 5/8 Reg 90,0
metal canister protecting the diaphragm from breakage, MTRP127 (R991) 127 pin З-152  6 5/8 Reg 90,0
and channels to connect the grease reservoir with fric-
295,3 11 5/8 MTRP137 (R927) 137 pin З-152  6 5/8 Reg 90,0
tion areas in bearings.
MTRP437 (R114) 437X pin З-152  6 5/8 Reg 90,0
Shirttail and leg protection MTRP547 (R419) 547Х pin З-152  6 5/8 Reg 90,0
MTRP117 (R916) 117 pin З-152  6 5/8 Reg 85,0
Shirttail and leg leading edge are hardfaced and 304,8 12
MTRP437 (R918) 437X pin З-152  6 5/8 Reg 95,0
may be protected with tungsten carbide or diamond
inserts or a combination of tungsten carbide and diamond MTRP117 (R822) 117 pin З-152  6 5/8 Reg 86,0
inserts. Bits may have stabilization features to improve MTRP127 (R932) 127 pin З-152  6 5/8 Reg 90,0
bit performance by increasing bearing and cutting MTRP437 (R295) 437X pin З-152  6 5/8 Reg 95,0
structure durability. 311,1 12 1/4
MTRP447 (R597) 447X pin З-152  6 5/8 Reg 100,0
MTRP517 (R865) 517X pin З-152  6 5/8 Reg 100,0
MTRP537 (R929) 537X pin З-152  6 5/8 Reg 97,0
349,2 13 3/4 MTRP837 (R942) 837Y pin З-152  6 5/8 Reg 140,0

46 www.vbm.ru www.vbm.ru 47
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

Storm Standart
Drill bits with open bearings are designed specifically for high Standart line presents open bearing bits with steel teeth or tungsten carbide inserts.
speed drilling (up to 600 RPM). They are designed for a wide range of applications, drilling with low speed turbines,
Without sealing elements in the bearing, it is possible to maximize downhole hydraulic motor or for rotary drilling. Standart bits use both friction and roller
the journal and the rollers dimensions and to achieve full circu- bearings.
lation in the bearing which is highly important as it helps reduc-
tion of the torque, providing quick cooling action and increasing
bearing life.

Cutting structure
This product line may have either milled
teeth or TC I. To increase steel teeth life, steel
Cutting structure teeth are hardfaced with wear-resistant tung-
sten carbide based material. Depending on
This product line may have either milled teeth or TCI. To increase the rock hardness, either side surfaces or
steel teeth life, steel teeth are hardfaced with wear-resistant tungsten side and end surfaces of steel teeth are hard-
TCI bit
11 5/8 STM543 (R175) carbide based material. Depending on the rock hardness, either faced. The gauge may be protected with
side surfaces or side and end surfaces of steel teeth are hardfaced. tungsten carbide inserts. For additional pro-
The gauge may be protected with tungsten carbide inserts. For tection against gauge loss, a near gauge of
Roller Cone Drill Bits

Roller Cone Drill Bits

additional protection against gauge loss, a near gauge of tungsten tungsten carbide inserts may be used.
carbide inserts may be used.
Shirttail and leg protection
Shirttail and leg protection
Shirttail is hardfaced along its leading edge.
Shirttail is hardfaced along its leading edge.

Steel teeth bit

4 1/4 STD211 (R548)

Steel teeth bit Standart Product Line

11 5/8 STM121 (R187)
Diameter Connecting thread Weight,
Bit designation IADC code
mm in GOST API kg
Storm Product Line 95,3 3 3/4 STD211 (R569) 211 pin З-66  2 3/8 Reg 11,1
Diameter Connecting thread Weight, 104,8 4 1/8 STD211 (R549) 211 pin З-66  2 3/8 Reg 6,0
Bit designation IADC code
mm in GOST API kg
108,0 4 1/4 STD211 (R548) 211 pin З-66  2 3/8 Reg 5,0
171,4 6 3/4 STM121 (R459) 121 pin З-88  3 1/2 Reg 18,5
117,5 4 5/8 STD211 (R974) 211C pin З-76  2 7/8 Reg 7,0
190,5 7 1/2 STM513 (R225) 513X pin З-117  4 1/2 Reg 30,0
STM133 (R523) 133 pin З-117  4 1/2 Reg 36,0 130,2 5 1/8  STD613 (R236) 613X pin З-76 shortened  2 7/8 Reg 8,0
215,9 8 1/2 STM211 (R192) 211 pin З-117  4 1/2 Reg 35,0 190,5 7 1/2 STD131 (R64) 131 pin З-117  4 1/2 Reg 30,0
STM513 (R524) 513X pin З-117  4 1/2 Reg 37,0
215,9 8 1/2 STD623 (R957) 623CX pin З-117  4 1/2 Reg 37,0
222,3 8 3/4 STM513 (R515) 513X pin З-117  4 1/2 Reg 33,0
269,9 10 5/8 STM543 (R226) 543X pin З-152  6 5/8 Reg 72,0 STD231 (R07) 231 pin З-152  6 5/8 Reg 67,0
269,9 10 5/8
STM121 (R187) 121 pin З-152  6 5/8 Reg 76,2 STD623 (R20) 623X pin З-152  6 5/8 Reg 77,0
STM133 (R519) 133 pin З-152  6 5/8 Reg 82,0 STD533 (R95) 533X pin З-152  6 5/8 Reg 95,0
295,3 11 5/8
STM211 (R166) 211 pin З-152  6 5/8 Reg 84,0 295,3 11 5/8
STD623 (R62) 623X pin З-152  6 5/8 Reg 95,0
STM543 (R175) 543Х pin З-152  6 5/8 Reg 86,0

48 www.vbm.ru www.vbm.ru 49
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Roller Cone Bits Product Lines

Single
Small and medium diameter one-cone bits with sealed bearings are designed for deep
Single Product Line
drilling and provide increased bit life as compared with three-cone bits.
Single bits have uniform friction bearings with hard-faced sur faces. Diameter Connecting thread
Their strong bearing, power ful cutting structure and high thickness of the cone ensure Bit designation IADC code Weight, kg
accident-free highly-efficient per formance at greatest depths. mm in GOST API
When fitted with PDC cutters such bits per fectly cope with high loading during forced
drilling practices.
The shape of the cone accounts for semispherical cutting at bottom hole. The absence
of the gauge relief typical of the three-cone bits, as well as the legs facing the wellbore
124,0 4 7/8 SGL627 (R2007) 627Z pin З-76  2 7/8 Reg 15,0
wall and preventing the quick change of the direction make the one-cone drill bits of the
Single Product Line indispensable during horizontal and directional drilling with high
build rate.

190,5 7 1/2 SGL547 (R2016) 547Z pin З-117  4 1/2 Reg 37,0

Cutting structure
Roller Cone Drill Bits

Roller Cone Drill Bits

Patented cutting structure of Single bits is
represented with tungsten carbide hoof-shaped
inserts with sharp curvilinear cutting edge, project-
ing above the cone body by 5-7mm and having SGL547 (R812) 547Z pin З-117  4 1/2 Reg 45,0
various layout patterns, as well as PDC cutters.
Depending on the drilling applications, it is pos-
sible to alternate TCI and PDC cutters.
To improve durability of the cutting structure, 215,9 8 1/2
enhance the performance and reduce casing wear,
full surface of the cone can be coated with pat-
ented protector by means of detonation spraying. SGL627 (R2006) 627Z pin З-117  4 1/2 Reg 45,0

Lubrication system
Bit lubrication system is designed to com-
pensate grease consumption and pressure during
long-term operation and consists of a grease
reservoir with a rigidly mounted cap, a flexible
diaphragm, a metal canister protecting the dia-
phragm from breakage, and channels connecting
the grease reservoir with friction areas in the bear-
ings.

One-cone bit
8 1/2 SGL547 (R812)

50 www.vbm.ru www.vbm.ru 51
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Technical Information

Set of nozzles for roller cone bits

Torque recommended for thread connections
Bit diameter, in Design number Nozzle ID, mm

3 3/4”; 4 1/8”; 4 1/4” R9531 7,9; 9,5; 11,1

Bit diameter Connection thread Recommended wrench torque

4 3/4” – 5”
12,7; 14,3; 14,3
4 3/4” – 5” for IADC codes 54x, R6738
8,7; 12,7; 14,3
61x and 62x in mm API GOST Ft-lbs kN.m

5 1/2” – 6” R3401 8,7; 11,1; 14,3

3 3/4 - 4 1/4 95,3 - 108,0 2 3/8 Reg З - 66 З000 - 3500 4 - 4,8

6 1/8” – 6 3/4” R1804 8,7; 11,1; 14,3

4 5/8 - 5 3/8 117,5 - 136,5 2 7/8 Reg З - 76 4500 - 5500 6 - 7,5

7 1/2”; 7 7/8” – 8 1/2”; 8 3/4”;
R0030 12,7; 14,3; 15,9
9 5/8” for IADC codes 54x,
Roller Cone Drill Bits

Roller Cone Drill Bits

R0030 (centr.) 12,7
61x and 62x
5 1/2 - 6 3/4 139,7 - 171,4 3 1/2 Reg З - 88 7000 - 9000 9,5 - 12
7 1/2”; 7 7/8” – 9 5/8” for R0030 14,3; 15,9; 19,0
other bit types R0030 (centr.) 14,3

7 1/2 - 8 3/4 190,5 - 222,3 4 1/2 Reg З - 117 12000 - 16000 16 - 22

11”; 11 5/8”; 12”; 12 1/4”; 13 3/8”; R0101 19,0; 20,6; 20,6
13 3/4”; 15 1/2”; 17 1/2” R0101 (centr.) 15,9
9 7/8”; 10 5/8” R0030 (centr.) 12,7
9 5/8 - 13 3/4 244,5 - 349,2 6 5/8 Reg З - 152 28000 - 32000 38 - 43

R9819 (extended) 15,9; 15,9; 15,9

16”
R0101 (centr.) 15,9
14 3/4 - 26 374,6 - 660,4 7 5/8 Reg З - 177 З4000 - 40000 46 - 54

14 1/2”; 14 3/4”; 15”; 16”; 17”; R0101 15,9; 15,9; 15,9

18 1/2”; 19 19/64” R0101 (centr.) 15,9

R0101 19,0; 19,0; 19,0

20”
R0101 (centr.) 15,9 Roller cone bits diameter tolerances
R0101 20,6; 20,6; 20,6
26”
R0101 (centr.) 19,0
Drill bit rated diameter, in Tolerance, in Tolerance, mm

8 3/8” — 8 3/4” extended nozzles 20 18

(steel teeth bits) 18 15 1 3/4” up to and including 13 3/4” +1/32 - 0 +0.8
Tech Spec
3664-034-05749180-01
Over 13 3/4” up to and including 17 1/2” +1/16 - 0 +1.6
8 1/2” — 8 3/4” extended nozzles 20 18
(TCI bits) 18 15

Over 17 1/2” +3/32 - 0 +2.4

*Set of nozzles can be changed on customer request

52 www.vbm.ru www.vbm.ru 53
 Volgaburmash. XXI century tool.
tools.

PDC Drill Bits

Company
Company

PDC Drill Bits

 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

PDC Bits Designation PDC Bits Design Features

Спиральная
Key features:
12 1/4 sFD 5 19 SM (A64)
лопасть долота

Improved structural strength and increased PDC

number.

Diameter, in Product
line
Blade
count
PDC- Rock
size hardness
Design
Advantages:
Cutting mode is smoother. Drilling efficiency is higher,
the bit is more steerable in directional wells.

Bit spiral blade

Key features:
Increased bit wear-resistance.

Advantages:
This type of bit gauge protection ensures that the
hole gauge is maintained for a long period of time,
which, in its turn, ensures steady bit performance.
PDC cutters on the bit gauge

Key features:
In case of vibrations, shock-
proof inserts restore smooth drilling.

Advantages:
PDC Drill Bits

PDC Drill Bits

The bit operates more steadily, the life of PDC cutters
Bit anti-vibration protection
and general bit performance are increased.

Key features:
The cutters interact with forma-
tion when the bit is pulled up.

Advantages:
Preventing drill pipe drag provides quicker and safer
Back-reamers
pulling out the bit.

56 www.vbm.ru www.vbm.ru 57
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

PDC Bits Design Features PDC Bits Product Lines

FastDrill
Key features: These steel body PDC bits are designed for full diam-
Bearing inserts limit depth of eter drilling of oil and gas vertical and directional wells.
cut of the bit. They give high performance and high ROPs.

Advantages:
Depth-of-cut control lessens bit torque and improves
steerability in directional drilling.
Bearing inserts on the inner cone
of the bit profile

Key features:
Protective coating (1) includes solid mass of ultra- PDC bit
5 1/2 FD413S (A303)
hard tungsten carbide. Powder coating (2) contains het-
erogeneous mixture of metallic powders of pulverous
matrix components and tungsten carbide.
FastDrill Product Line
Advantages: Diameter
Bit designation IADC code
Connecting thread Weight,
mm in GOST API kg
The contents of the hard-facing (1) absorbs impact and
improves corrosion resistance. Powder coating (2) has very high 83,0 3 9/32 FD409МA (A83) S233 pin З-66 2 3/8 Reg 5,0
resistance to friction, impacts and erosive action even at high 92,0 3 5/8 FD409MA (A84) S233 pin З-66 2 3/8 Reg 6,2
Improved coating of the bit body temperature. It has high abrasion resistance.
with plazma flame spraying
98,4 3 7/8 FD413SM (A620) S233 pin З-66 2 3/8 Reg 5,0
and weld penetration 114,0 4 1/2 FD609MA (A85) S223 pin З-66 2 3/8 Reg 6,0
118,0 4 21/32 FD313S (A437) S233 pin З-50 - 4,5
FD313S (A386) S233 pin З-76 2 7/8 Reg 10,0
120,6 4 3/4
FD613SM (A86) S332 pin З-76 2 7/8 Reg 11,5
Key features: FD413SM (A301) S233 pin З-76 2 7/8 Reg 11,0
Anti-balling coating of the bit body with a special-
123,8 4 7/8 FD513SM (A473) S332 pin З-76 2 7/8 Reg 10,5
ized alloy prevents cuttings sticking to the bit body.
FD609SMA (A300) S233 pin З-76 2 7/8 Reg 10,3
PDC Drill Bits

PDC Drill Bits

Advantages: 124,0 4 7/8
FD413SMA (A249) S233 pin З-76 2 7/8 Reg 12,0
This features stabilizes drilling in various applications by FD609SMA (A104) S233 pin З-76 2 7/8 Reg 10,0
preventing bit balling and stabilizing ROP. FD413SMA (A289) S233 pin З-76 2 7/8 Reg 11,5
126,0 4 31/32
FD613SMA (A321) S233 pin З-76 2 7/8 Reg 10,0
132,0 5 3/16 FD313S (A387) S233 pin З-63,5 - 10,0
Anti-balling coating
FD513M (A01) S333 pin З-88 3 1/2 Reg 18,0
139,7 5 1/2
FD813MH (A302) S333 pin З-88 3 1/2 Reg 17,0
141,0 5 35/64 FD313S (A438) S233 pin З-76 2 7/8 Reg 12,2
FD613SM (A62) S233 pin З-88 3 1/2 Reg 18,0
142,9 5 5/8 FD709MH (A87) S333 pin З-88 3 1/2 Reg 17,0
FD713M (A420) S333 pin З-88 3 1/2 Reg 16,5
144,4 5 11/16 FD613MH (A88) S233 pin З-88 3 1/2 Reg 16,0

58 www.vbm.ru www.vbm.ru 59
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

PDC Bits Product Line

FastDrill Product Line FastDrill Product Line

Diameter Connecting thread Weight, Diameter Connecting thread Weight,
Bit designation IADC code Bit designation IADC code
mm in GOST API kg mm in GOST API kg
FD513SM (A397) S232 pin З-88 3 1/2 Reg 16,0 FD416SM (A346) S223 pin З-117 4 1/2 Reg 42,0
146,0 5 3/4 FD613SM (A396) S232 pin З-88 3 1/2 Reg 17,0
FD416SM (A417) S223 pin З-117 4 1/2 Reg 45,5
FD713M (A426) S333 pin З-88 3 1/2 Reg 17,0
FD416SM (A423) S223 pin З-117 4 1/2 Reg 49,0
FD513SM (A34) S233 pin З-88 3 1/2 Reg 19,0
149,2 5 7/8 FD419S (A245) S223 pin З-117 4 1/2 Reg 41,0
FD713MH (A485) S333 pin З-88 3 1/2 Reg 18,0
FD413SM (A285) S223 pin З-88 3 1/2 Reg 18,0 FD419S (A383) S222 pin З-117 4 1/2 Reg 43,0
FD513SM (A106) S233 pin З-88 3 1/2 Reg 19,0 220,7 8 11/16 FD516SM (A350) S223 pin З-117 4 1/2 Reg 43,0
152,4 6
FD609MA (A107) S233 pin З-88 3 1/2 Reg 16,0 FD613MH (A360) S433 pin З-117 4 1/2 Reg 45,0
FD713MH (A169) S333 pin З-88 3 1/2 Reg 18,0 FD613SM (A399) S233 pin З-117 4 1/2 Reg 40,0
FD416S (A286) S223 pin З-88 3 1/2 Reg 18,0 FD613SM (A422) S233 pin З-117 4 1/2 Reg 46,0
FD609MА (A89) S233 pin З-88 3 1/2 Reg 18,0
155,6 6 1/8 FD616SM (A351) S224 pin З-117 4 1/2 Reg 44,0
FD613SM (A471) S333 pin З-88 3 1/2 Reg 9,5
FD813MH (A175) S333 pin З-117 4 1/2 Reg 51,0
FD713MH (A460) S332 pin З-88 3 1/2 Reg 17,5
222,3 8 3/4 FD616SM (A421) S323 pin З-117 4 1/2 Reg 43,5
161,0 6 21/62 FD313S (A439) S233 pin З-76 2 7/8 Reg 15,5
FD513M (A06) S223 pin З-88 3 1/2 Reg 20,0 FD519S (A192) S223 pin З-152 6 5/8 Reg 64,0
250,8 9 7/8
165,1 6 1/2 FD613SM (A474) S333 pin З-88 3 1/2 Reg 25,0 FD616SM (A90) S223 pin З-152 6 5/8 Reg 63,5
FD713MH (A469) S332 pin З-88 3 1/2 Reg 18,3 FD416SM (A432) S323 pin З-152 6 5/8 Reg 69,0
FD313S (A388) S233 pin З-117 4 1/2 Reg 33,0 FD519S (A196) S223 pin З-152 6 5/8 Reg 65,0
FD416S (A433) S323 pin З-117 4 1/2 Reg 36,5 269,9 10 5/8
190,5 7 1/2 FD616SM (A102) S223 pin З-152 6 5/8 Reg 67,4
FD613SM (A77) S233 pin З-117 4 1/2 Reg 37,0 FD716SM (A307) S223 pin З-152 6 5/8 Reg 76,0
FD813MH (A97) S333 pin З-117 4 1/2 Reg 38,0
FD419SM (A436) S323 pin З-152 6 5/8 Reg 82,0
195,0 7 11/16 FD613SM (A390) S233 pin З-117 4 1/2 Reg 35,5
FD613MH (A361) S433 pin З-152 6 5/8 Reg 86,5
214,3 8 7/16 FD613SM (A149) S233 pin З-117 4 1/2 Reg 42,0
FD313S (A389) S233 pin З-117 4 1/2 Reg 40,0 FD616M (A398) S424 pin З-152 6 5/8 Reg 95,0
FD613MH (A359) S433 pin З-117 4 1/2 Reg 45,0 FD619SM (A129) S223 pin З-152 6 5/8 Reg 83,0
295,3 11 5/8
FD416S (A368) S223 pin З-117 4 1/2 Reg 42,0 FD619SM (A395) S223 pin З-152 6 5/8 Reg 80,0
FD416SM (A400) S223 pin З-117 4 1/2 Reg 44,0 FD619SM (A406) S323 pin З-152 6 5/8 Reg 83,0
FD416SM (A466) S222 pin З-117 4 1/2 Reg 41,5 FD716M (A425) S323 pin З-152 6 5/8 Reg 84,0
FD416SM (A478) S223 pin З-117 4 1/2 Reg 44,0 FD816MH (A472) S424 pin З-152 6 5/8 Reg 96,0
FD419S (A284) S223 pin З-117 4 1/2 Reg 41,0
FD519SM (A392) S223 pin З-152 6 5/8 Reg 84,0
FD419S (A382) S222 pin З-117 4 1/2 Reg 42,0
FD613MH (A385) S333 pin З-152 6 5/8 Reg 92,0
PDC Drill Bits

PDC Drill Bits

FD513MH (A404) S434 pin З-117 4 1/2 Reg 45.4
FD513SM (A488) S333 pin З-117 4 1/2 Reg 43,0 FD616SM (A157) S223 pin З-152 6 5/8 Reg 81,0
215,9 8 1/2 FD516MH (A415) S322 pin З-117 4 1/2 Reg 42,0 311,1 12 1/4 FD619SM (A140) S223 pin З-152 6 5/8 Reg 91,0
FD516SM (A477) S223 pin З-117 4 1/2 Reg 42,0 FD619SM (A393) S323 pin З-152 6 5/8 Reg 83,7
FD613SM (A418) S233 pin З-117 4 1/2 Reg 43,0 FD713SM (A162) S233 pin З-152 6 5/8 Reg 84,0
FD616MH (A369) S423 pin З-117 4 1/2 Reg 49,0 FD716SM (A121) S223 pin З-152 6 5/8 Reg 87,0
FD616SM (A248) S224 pin З-117 4 1/2 Reg 44,0 374,7 14 3/4 FD716SM (A128) S223 pin З-177 7 5/8 Reg 97,0
FD619SM (A153) S233 pin З-117 4 1/2 Reg 45,0
FD419SM (A288) S223 pin З-177 7 5/8 Reg 162,0
FD713MH (A170) S334 pin З-117 4 1/2 Reg 49,0 393,7 15 1/2
FD816MH (A467) S424 pin З-177 7 5/8 Reg 200,0
FD716MH (A309) S324 pin З-117 4 1/2 Reg 47,0
FD813MH (A155) S434 pin З-117 4 1/2 Reg 50,0 406,4 16 FD619SM (A73) S224 pin З-177 7 5/8 Reg 180,0
FD816MH (A463) S424 pin З-117 4 1/2 Reg 50.5 431,8 17 FD619SM (A123) S224 pin З-177 7 5/8 Reg 190,0
FD913MH (A105) S434 pin З-117 4 1/2 Reg 48,5 FD519SM (A130) S223 pin З-177 7 5/8 Reg 151,0
444,5 17 1/2
219,1 8 5/8 FD613SM (A419) S233 pin З-117 4 1/2 Reg 40,0 FD619SM (A82) S224 pin З-177 7 5/8 Reg 190,0

60 www.vbm.ru www.vbm.ru 61
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

PDC Bits Product Line

smartFastDrill FastDrillMatrix
These bits are designed for full diameter drilling of oil and gas vertical and directional wells. Premium smart- These matrix body PDC bits are designed for drill-
FastDrill PDC bits are developed with unique software system giving an opportunity of making up optimal ing wells in complicated drilling applications and
cutting structure for efficient rock drilling. This method increases bit dynamic stability, ROP and wear-resistance, for drilling long sections where the key task is drill-
аs well as provides high bit steerability. ing a section in one trip. The bits have high resis-
tance to abrasiveness and erosion.

PDC bit
PDC bit 8 1/2 FDM616 (AM369)
15 1/2 sFD619SM (A56)

smartFastDrill Product Line FastDrillMatrix Product Line

Diameter Connecting thread Weight, Diameter Connecting thread
Bit designation IADC code Weight,
mm in GOST API kg Bit designation IADC code
mm in GOST API kg
123,8 4 7/8 sFD613M (A410) S332 pin З-76  2 7/8 Reg 12,0
124,0 4 7/8 sFD613M (A440) S332 pin З-76  2 7/8 Reg 12,0 152,4 6  FDM613MH (AM452) М432 pin З-88  3 1/2 Reg 26,0
sFD413SM (A407) S233 pin З-88  3 1/2 Reg 16,0
139,7 5 1/2 FDM613MH (AM424) M434 pin З-117  4 1/2 Reg 78,0
sFD613M (A408) S332 pin З-88  3 1/2 Reg 16,5
sFD413SM (A304) S233 pin З-88  3 1/2 Reg 16,2 FDM616MH (AM369) М323 pin З-117  4 1/2 Reg 70,0
142,9 5 5/8
sFD613M (A409) S332 pin З-88  3 1/2 Reg 16,7 215,9 8 1/2
FDM616MH (AM465) М423 pin З-117  4 1/2 Reg 112,0
PDC Drill Bits

PDC Drill Bits

sFD519SM (A147) S223 pin З-117  4 1/2 Reg 47,0
215,9 8 1/2 sFD613SM (A405) S333 pin З-117  4 1/2 Reg 41,0 FDM716MH (AM309) M323 pin З-117  4 1/2 Reg 73,0
sFD616SM (A154) S233 pin З-117  4 1/2 Reg 42,0
219,1 8 5/8 FDM616MH (AM449) M424 pin З-117  4 1/2 Reg 75,0
sFD416SM (A348) S223 pin З-117  4 1/2 Reg 44,0
219,1 8 5/8
sFD613SM (A462) S333 pin З-117  4 1/2 Reg 40,0 220,7 8 11/16 FDM616MH (AM451) M423 pin З-117  4 1/2 Reg 77,0
220,7 8 11/16 sFD613SM (A461) S333 pin З-117  4 1/2 Reg 41,0
222,3 8 3/4 FDM716MH (AM427) М423 pin З-117  4 1/2 Reg 82,0
sFD419S (A394) S222 pin З-152  6 5/8 Reg 82,0
295,3 11 5/8
sFD519SM (A47) S223 pin З-152  6 5/8 Reg 75,0 FDM516MH (AM412) М423 pin З-152  6 5/8 Reg 150,0
sFD419S (A342) S223 pin З-152  6 5/8 Reg 77,0 295,3 11 5/8
300,0 11 13/16 FDM616MH (AM441) М422 pin З-152  6 5/8 Reg 130,0
sFD519SM (A243) S223 pin З-152  6 5/8 Reg 80,0
311,1 12 1/4 sFD419S (A391) S222 pin З-152  6 5/8 Reg 87,0 311,1 12 1/4 FDM616MH (AM450) M422 pin З-152  6 5/8 Reg 140,0
393,7 15 1/2 sFD619SM (A56) S323 pin З-177  7 5/8 Reg 188,0

62 www.vbm.ru www.vbm.ru 63
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

PDC Bits Product Line

BicentricDrill SideTrack
Bicentric steel body PDC bits of BicentricDrill line are designed Side-tracking PDC bits are designed for side-tracking in open hole with
for drilling with simultaneous borehole opening of oil and gas water or mud flushing. The bits can be used in rotary, turbine drilling
vertical and directional wells. Absence of moving parts or with downhole motors.
eliminates possibility of their being lost in the well. Other
advantages of BicentricDrill bits are their ROP comparable
with the standard one and bits cost reduction.

Side-tracking PDC bit

8 1/2 ST613MH (A100)

SideTrack Product Line

Diameter Connecting thread Weight,
Bit designation IADC code
mm in GOST API kg
139,7 5 1/2 ST613MH (A242) S231 pin З-88  3 1/2 Reg 14,7
Bicentric PDC bit
6 x 6 14/16 BD613SM (A58) 142,9 5 5/8 ST613MH (A468) S231 pin З-88  3 1/2 Reg 15,0
215,9 8 1/2 ST613MH (A100) S231 pin З-117  4 1/2 Reg 35,6
220,7 8 11/16 ST613MH (A384) S331 pin З-117  4 1/2 Reg 36,0
BicentricDrill Product Line 295,3 11 5/8 ST613MH (A240) S231 pin З-152  6 5/8 Reg 73,0

Diameter Connecting thread

mm in
Bit designation IADC
code GOST API
Weight, kg WiperTrip
120,6 x 142,9 4 3/4 x 5 5/8 BD613M (A14) S233 pin З-76  2 7/8 Reg 14,5 These are steel body PDC bits. The bits are designed for wiper drift-
ing and borehole reaming. The bits have PDC and TCI in their cutting
139,7 х 165,1 5 1/2 х 6 1/2 BD613MH (A26) S233 pin З-88  3 1/2 Reg 22,0 structure. The design has a parabolic profile preventing self-induced
side-tracking.

152,4 х 175,0 6 x 6 7/8 BD613SM (A58) S233 pin З-88  3 1/2 Reg 26,0
PDC Drill Bits

PDC Drill Bits

165,1 х 190,5 6 1/2 x 7 1/2 BD713MH (A144) S233 pin З-88  3 1/2 Reg 31,0

215,9 х 238,2 8 1/2 x 9 3/8 BD713SM (A19) S233 pin З-117  4 1/2 Reg 70,0

PDC bit
215,9 х 250,8 8 1/2 x 9 7/8 BD613SM (A136) S233 pin З-117  4 1/2 Reg 61,0 8 7/16 WT613SM (A445)

215,9 х  266,7 8 1/2 x 10 1/2 BD713SM (A71) S233 pin З-117  4 1/2 Reg 70,0 WiperTrip Product Line
Diameter Connecting thread Weight,
241,2 х 269,9 9 1/2 x 10 5/8 BD713MH (A317) S233 pin З-152  6 5/8 Reg 83,0 Bit designation IADC code
mm in GOST API kg
142,9 5 5/8 WT613S (A416) S234 box З-86 box NC31 17,0
BD713MH (A241) S233 pin З-152  6 5/8 Reg 150,0
214,0 8 7/16 WT613SM (A445) S134 box З-117 box 4 1/2 Reg 41,5
311,1 х 342,9 12 1/4 x 13 1/2
215,9 8 1/2 WT413SM (A447) S134 box З-133  box NC 50 42,5
BD716MH (A316) S323 pin З-152  6 5/8 Reg 147,0
218,0 8 19/32 WT613SM (A446) S134 box З-117 box 4 1/2 Reg 43,0

64 www.vbm.ru www.vbm.ru 65
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Core Bits Product Lines Technical information

CoreBits
Steel body PDC core bits are designed for drilling oil and gas wells with simultaneous core
Torque recommended for thread connections
recover y.
Connecting thread
Recommended torque, kNm
API GOST
2 3/8 З-66 4,0 - 4,8

2 7/8 З-76 6,0 – 7,5

3 1/2 З-88 9,5 – 12,0

4 1/2 З-117 16,0 – 22,0

6 5/8 З-152 38,0 – 43,0

7 5/8 З-177 46,0 – 54,0

Formation hardness PDC bits diameter tolerance

S Soft Drill bit rated diameter, in Tolerance, in Tolerance, mm

SM Soft with medium stringers Less than 6 3/4 +0 - 0,015 –0.38

6 25/32 to 9 +0 - 0,020 –0.51
M Medium 9 1/31 to 13 3/4 +0 - 0,030 –0.76
13 25/32 to 17 1/2 +0 - 0,045 –1.14
MH Medium with hard stringers
Over 17 17/32 +0 - 0,063 –1.60
Core bit Core bit Core bit
8 3/8 / 3 1/8 CB613SM (A38) 8 3/8 / 3 7/8 CB613SM (A45) 8 3/8 / 3 1/8 CB1009MH (A68)
Nozzle types for PDC bits
CoreBits Product Line Nozzles ID, in/mm
Diameter Core bit IADC Connecting thread Weight, Nozzletype 7/32 8/32 9/32 10/32 11/32 12/32 13/32 14/32 15/32 16/32 18/32 20/32 22/32 24/32 26/32 28/32
mm in designation code GOST API kg 5,6 6,4 7,1 7,9 8,7 9,5 10,3 11,1 11,9 12,7 14,3 15,9 17,5 19,1 20,6 22,2
139,7 / 52,0 5 1/2 / 2 1/32 CB613SM (A25) S132 box МК 110 х 6 х 1:8  10,0 22, ports * * * * * * *
139,7 / 67,0 5 1/2 / 2 5/8 CB613SM (A353) S132 box МК 110 х 6 х 1:8  9,0 27 * * * * * * * * * * * *
PDC Drill Bits

PDC Drill Bits

146,0 / 80,0 5 3/4 / 3 1/8 CB613SM (A458) S133 box МК 119 х 4 х 1:16 8,0 39 * * * * * * * * * * * * * * *
158,7 / 67,0 6 1/4 / 2 5/8 CB613SM (A37) S133 box З-133  13,0
163,5 / 67,0 6 7/16 / 2 5/8 CB813МН (A92) S123 box З-133  NC 50 16,8
187,3 / 80,0 7 3/8 / 3 1/8 CB613SM (A35) S132 box МК 150 х 6 х 1:8 19,0 RPM recommended for PDC drill bits and core bits
195,0 / 80,0 7 11/16 / 3 1/8 CB913MH (A174) S233 box МК 150 х 6 х 1:8 19,0
212,7 / 80,0 8 3/8 / 3 1/8 CB613SM (A459) S233 box З-150  22,0 Drill bits and core bits diameter, in
Product type Blade count
212,7 / 80,0 8 3/8 / 3 1/8 CB613SM (A38) S133 box МК 150 х 6 х 1:8 20,0 3 9/32 to 5 1/2 5 5/8 to 7 7/8 8 3/8 to 9 7/8 10 5/8 to 17 1/2

212,7 / 80,0 8 3/8 / 3 1/8 CB1009MH (A68) S233 box МК 150 х 6 х 1:8 28,6 3-4 60...400 60...400 60...350 60...350
212,7 / 100,0  8 3/8 / 3 7/8 CB613SM (A45) S133 box З-161  23,0 5-6 60...200 60...250 60...350 60...400
212,7 / 100,0 8 3/8 / 3 7/8 CB1009MH (A69) S233 box З-161  24,5 Drill bits
7-8 60...200 60...280 60...350 60...400
215,9 / 80,0 8 1/2 / 3 1/8 CB613SM (A431) S133 box МК 150 х 6 х 1:8 20,0
More than 9 - 60...250 60...300 60...400
215,9 / 80,0 8 1/2 / 3 1/8 CB813SM (A74) S233 box МК 150 х 6 х 1:8 23,0
215,9 / 100,0 8 1/2 / 3 7/8 СВ1009MH (A292) S233 box З-171  6 5/8 FH 23,0 Core bits More than 4 60...120 60...120 60...120 60...120

66 www.vbm.ru www.vbm.ru 67
 Volgaburmash. XXI century tools.
BHA Constituent
Elements

Company
BHA Constituent Elements
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Hole-openers Bladed hole-openers

Bladed and rock bit hole-openers up to 920 mm (36 1/4 inch) in diameter are used for hole-opening
while drilling oil and gas wells, as well as at any sites due to technical factors, including the regions
of the Far North. A hole-opener combined with a pilot bit can replace a large diameter bit. Application:
Several patented original technical solutions were implemented in hole-openers design. The prod-
uct is characterized by the operating convenience and reliability, it helps customers reduce drilling Opening bore hole in different types of formations: from
time and drilling costs. soft with medium interlayers to hard formations.

Design:
Work surfaces of the hole-opener are applied
with wear-resistant material to prevent early wear of
Rock bit hole-openers the blades. PDC cutters on the gauge improve wear-
resistance of the design.

Bladed hole-opener
Application: 1-РЛ711, 0МС

Opening oil and gas wells as well as using when

building oil and gas pipelines and different utility systems
in soft, medium and hard formations, borehole is washed Bladed hole-openers
with water or drilling mud. Pilot bit Rock Диаметр
Diameter Connecting thread Number Length, Weight,
Designation diameter hardness
Design: mm in mm in category GOST API
резца
PDC,мм
of cones mm kg

The hole-openers are manufactured from sec- 19 box З-171 / box box 6 5/8 FH /
711,0 28 1-РЛ711,0МС 490,0 МС 16 6 1100 763,0
tions of roller cone bits with sealed or open bearings, 9/32 З-171 box 6 5/8 FH
with TCI or milled cutting structure. 920,0
36 
1-РЛ920,0МС 508,0
20
МС
box З-171 / box box 6 5/8 FH /
16 6 1200 1070,0
7/32 1/32 З-171 box 6 5/8 FH

String Stabilizers
String stabilizers are designed to balance drill string and downhole motor, to stabilize or
Rock bit hole-opener modify well-bore trajectory.
РШ-558, 8М-R2031

Application:
Rock bit hole-openers Drilling soft, medium, hard and solid formations (MCTK type).

Diameter
Pilot bit
diameter Rock Connecting thread
Number Length, Weight,
Design:
Designation hardness Bearing surfaces of the blades are hardfaced with wear-
of cones mm kg
mm in mm in category GOST API resistant material to prevent early wear. PDC cutters on the
bearing surfaces improve durability of string stabilizers.
РШ-558, box З-171 / box 6 5/8 FH / String stabilizer
558,8 22 393,7 15 1/2 М 4 1700 590,0 1-Ц 219,0 МСТК
8М-R2031 box З-171 box 6 5/8 FH

РШ-711, box З-171 / box 6 5/8 FH /

711,2 28
2М-R2030
444,5 17 1/2 М
box З-171 box 6 5/8 FH
4 1700 836,0 String Stabilizers Product Line
BHA Constituent Elements

BHA Constituent Elements

String stabilizer Working
Connecting thread Total
diameter part Weight,
Designation lenght,
lenght, kg
mm
mm in GOST API mm
1-Ц 219,0 МСТК 219,0 8 5/8 З-147/З-133 5 1/2 FH/NC50 500 150 57

70 www.vbm.ru www.vbm.ru 71
 CATALOGUE Products for oil&gas industry CATALOGUE Products for oil&gas industry

Near-bit Stabilzers Subs

Near-bit stabilizers are designed for reaming the Subs are designed for interconnecting drill string com-
wellbore and improvement of bit and downhole ponents and making up drilling tools used for drilling a
motor performance. well.

Application:
Drilling soft and medium abrasive formations
(MC-type);
Drilling medium abrasive and hard formations
(CT-type).

Design:
Bearing surfaces of the blades are hard-
faced with wear-resistant material to prevent
early wear. PDC cutters on the bearing sur- Subs М-152/152
faces improve durability of near-bit stabilizers.
Near-bit stabilizer
1-КА 220,7 CТ

Subs Product Line

Near-bit Product Line Diameter,
mm
Designation Lenght, mm Inner diameter, mm
Weight,
kg
Near-bit Working 140,0 М-117/117 355 78 23,3
Connecting thread Total
diameter part Weight,
Designation lenght,
lenght, kg 140,0 Н-117/117 463 58 44,0
mm
mm in GOST API mm 140,0 П-117/117 355 58 36,0
1-КА 212,0 СТ 212,0 8 11/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 43,0
155,0 М-133/117 385 78 32,0
1-КА 213,0 СТ 213,0 8 3/8 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 48,8 155,0 П-133/133 484 95 24,0
2-КА 213,5 СТ 213,5 8 13/32 Pin З-147/box З-133 5 1/2 FH/NC50 500 153 64,0 178,0 П-133/147 520 101 46,1
1-КА 214,0 СТ 214,0 8 7/16 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 49,0 178,0 П-147/133 524 95 44,0
1-КА215,1МС 215,1 8 15/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 523 150 62,0 178,0 М-147/117 400 78 33,5
1-КА 215,9 СТ 215,9 8 1/2 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 43,0 190,00 П-147/147 527 80 63,0
2-КА215,9СТ 215,9 8 1/2 Pin З-133/box 3-133 NC 50 / NC 50 500 153 55,0 195,00 П-133/133 484 95 56,0
2-КА 215,9 СТ-02 215,9 8 1/2 Box З-133/box 3-133 NC 50 / NC 50 386 155 49,0 195,00 П-147/147 527 80 68,0
3-КА 215,9 СТ 215,9 8 1/2 Pin З-147/box 3-133 5 1/2 FH/NC50 350 115 43,0 195,00 П-133/133 484 95 53,0

1-КА 218,0 СТ 218,0 8 19/32 Box З-133/box З-133 NC50/NC50 386 150 47,0
197,00 М-152/152 391 101 42,0
203,00 П-147/171 521 101 62,8
1-КА 218,0 СТ-01 218,0 8 19/32 Box З-133/box З-133 NC50/NC50 386 155 49,0
203,00 Н-171/171 528 101 79,0
2-КА 218,0 СТ 218,0 8 19/32 Pin З-147/box З-133 5 1/2 FH/NC50 350 115 43,5
225,00 Н-171/177 550 101 79,0
1-КА218,2МС 218,0 8 19/32 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 526 150 62,0
225,00 П-177/171 517 90 98,8
1-КА 220,7 СТ 220,7 8 11/16 Box З-117/box З-117 4 1/2 Reg/4 1/2 Reg 295 150 44,0
225,00 П-177/152 517 98 114,0
1-КА 292,0 СТ 292,0 11 1/2 Box З-152/box З-147 6 5/8 Reg/5 1/2 FH 505 220 103,0
226,00 М-171/177 415 101 79,0
1-КА 294,0 СТ 294,0 11 9/16 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 395 227 93,0
228,00 П-171/171 1600 90 350,0
BHA Constituent Elements

BHA Constituent Elements

2-КА 294,0 СТ 294,0 11 9/16 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 483 226 103,0
229,00 М-171/177 415 101 76,9
1-КА 295,3 СТ 295,3 11 5/8 Box З-152/box З-152 6 5/8 Reg/6 5/8 Reg 395 225 93,0 229,00 М-177/152 400 122 72,0
1-КА 311,1 СТ 311,1 12 1/4 Box З-152/box З-14 6 5/8 Reg/5 1/2 FH 505 200 103,0 229,00 М-152/171 400 122 77,8
1-КА 393,7 СТ 393,7 15 1/2 Box З-177/box З-152 7 5/8 Reg/6 5/8 Reg 390 180 148,0 229,00 П-171/171 1127 90 225,0

72 www.vbm.ru www.vbm.ru 73
CATALOGUE Products for oil&gas industry

Contacts

Volgaburmash, JSC

Groznenskaya 1, Samara, 4430 04, Russia

Tel. +7 (846) 30 0 -80 0 0
Fa x +7 (846) 30 0 -80 00
w w w.v b m.r u
E-m a il: m a il @ v b m.r u

Distributor

Samarsk iy Burovoy Instr ument

(Samara Drilling Tools), LLC

Zvenigorodskaya 22, Saint Petersburg, 191119, Russia, of f ice 342-343

Tel./fa x: +7 (812) 713-35- 0 0

email: expor [email protected] u

Volgaburmash, JSC
Groznenskaya 1, Samara, 443004, Russia
Tel.: +7(846) 300-8000
Fax: +7(846) 300-8000
E-mail: [email protected]
74 www.vbm.ru
 www.vbm.ru
© VOLGABURMASH, JSC

7 63 22 1408