© Siemens AG 2016

RUGGEDCOM WIN
Wide Area Private
Wireless Systems

Brochure 09/2016 siemens.com/ruggedcom-win

 © Siemens AG 2016

RUGGEDCOM WIN | Contents

RUGGEDCOM WIN family of products is the first

field proven broadband wireless product portfolio
designed for private networks, delivering the
benefits of carrier-grade 4G technology to critical
infrastructure applications in harsh environments.

Contents

Features and benefits 3

RUGGEDCOM WIN base stations 4

RUGGEDCOM WIN subscriber units 6

RUGGEDCOM power injectors 8

AeroMACS 9

Use cases 10

Ordering options 12

2
 © Siemens AG 2016

Features and benefits | RUGGEDCOM WIN

RUGGEDCOM WIN
Features and benefits

Standards based Quality of service

• Based on the IEEE 802.16e family of standards and • RUGGEDCOM WIN has built-in quality of service to
third party validated to support interoperability with enable operators to guarantee latency throughout
other vendors. a mix of IT and OT applications.
Standalone mode Security
• Unique capability that allows RUGGEDCOM WIN products • The RUGGEDCOM WIN product family has the security
to operate without external servers, reducing initial feature set to enable organizations that provide critical
capital outlay significantly, while maintaining features infrastructure to be compliant with legal mandates and
such as GOOSE over the air and mobility. security guidelines.
Range/throughput Mobility
• The RUGGEDCOM WIN product family has built-in • The RUGGEDCOM WIN product line is capable of maintaining
mechanisms to ensure the system is delivering session persistence with real time applications in a
maximum bandwidth for a given distance/coverage mobility environment at vehicular speeds.
requirement at all times.
Scale
• RUGGEDCOM WIN has been designed to cover
vast territories with embedded GPS or IEEE1588
synchronization options to reduce self-interference
and maximize frequency reuse.

3
 © Siemens AG 2016

RUGGEDCOM WIN | Base stations

RUGGEDCOM WIN base stations

The RUGGEDCOM WIN7000 and RUGGEDCOM WIN7200 Mobile WiMAX compliance
• Based on IEEE 802.16e standard and WiMAX Forum
base stations are powered by OFDMA radio technology,
Wave2 (MIMO) certification
which is robust in adverse environmental conditions
Rated for harsh environments
and enables Non-Line-Of-Sight (NLOS) operation. • IEEE 1613, IEC 61850-3, Class 1 Div 2 / ATEX Zone 2,
Leveraging link adaptation algorithms, modulation MIL-STD 810F, MIL-STD 509.4 – salt fog
• -40° C to +75° C temperature range
and coding are continuously adapted to prevailing
link conditions, ensuring an optimal balance between Range
• Transmit and receive diversity combined with high
robustness and efficiency. power for improved reach and NLOS performance
High bandwidth
• RUGGEDCOM WIN has two built-in radios operating on
the same frequency simultaneously (MIMO) to increase
bandwidth (up to 40 Mbps) and spectral efficiency

Volt/VAR Optimization

Voltage
Regulator
Control
Capacitor
Bank
Control

Fault Detection, Isolation & Restoration (FDIR)

Switch
Distribution Substation Control
RUGGEDCOM
RX1512
Recloser
Control

RUGGEDCOM
RUGGEDCOM IED
RUGGEDCOM RP100 Switch
WIN7200
WIN5200 Control

RTU & Line

Monitoring
Demand
RUGGEDCOM Optimization
RX1512
with Cellular
Distribution Substation
Line Module
G_RCM0_XX_90002

Power
Industrial Ethernet

Load Balancing

Multi-service field area network for smart grid applications.

4
 © Siemens AG 2016

Base stations | RUGGEDCOM WIN

RUGGEDCOM WIN7000 RUGGEDCOM WIN7200

high power base station standard power base station
The RUGGEDCOM WIN7000 is a high power, broadband The RUGGEDCOM WIN7200 is a lightweight broadband
wireless base station, compliant to the IEEE 802.16e wireless base station, compliant with the IEEE 802.16e
standard, designed for long range deployments in standard, also supporting unlicensed frequency bands
licensed frequency bands in harsh environments. in harsh environments.

Available in a number of different frequency bands, The RUGGEDCOM WIN7200 is a single sector lightweight
the RUGGEDCOM WIN7000 has been designed around base station that can be easily installed on poles, street
delivering maximum coverage where regulations permit lamps or walls, and provides connectivity to fixed or mobile
high power operation. The single sector design can end points. Connected via a single Power-over-Ethernet
accomodate as many sectors as required at a given (PoE) connection and easily provisioned, the RUGGEDCOM
site, driven by coverage, bandwidth and subscriber WIN7200 reduces operational cost and complexity.
density considerations.

Specifications RUGGEDCOM WIN7000 RUGGEDCOM WIN7200

Support of worldwide WiMAX deployments 1.X, 2.X and 3.X GHz bands 2.5,3.5,4.9,5.1,5.8 GHz bands
Flexible configurations Dual PoE or fiber optic interfaces Single PoE interfaces
2 x 27 dBm output power for 2.X GHz and 3.X GHz
Power output 2 x 36 dBm output power 2 x 24 dBm output power for 4.9 GHz and 5.1 GHz
2 x 21 dBm output power for 5.8 GHz
Width 290 mm (11.42 in) 257 mm (10.12 in)
Height 756 mm (29.76 in) 228 mm (8.98 in)
Depth 195 mm (7.68 in) 112 mm (4.41 in)
Net weight 15 kg (33.1 lb) 3 kg (6.6 lbs )
Maximum subscribers supported 128 64

5
 © Siemens AG 2016

RUGGEDCOM WIN | Subscriber units

RUGGEDCOM WIN subscriber units

RUGGEDCOM WIN5100 RUGGEDCOM WIN5100-V

vehicular subscriber unit enhanced vehicular subscriber unit
The RUGGEDCOM WIN5100 is a broadband wireless The RUGGEDCOM WIN5100-V is built to sustain shock
subscriber unit, compliant with the IEEE 802.16e and vibration to comply with heavy rail industry
standard, with external RF connectors for use in fixed certifications. With external M12 RF connectors and M12
or mobile applications in harsh environments. DC power connector, this subscriber unit can be installed
on mobile tractors and trucks, or in fixed locations
The self-learning subscriber device automatically detects susceptible to vibration such as runways.
the base station on the best signal available, allowing
for plug-and-play installation and maintenance-free The RUGGEDCOM WIN5100-V supports 9-36 VDC and
operation. RUGGEDCOM WIN5100 comes with external comes with an optional GPS receiver which allows accurate
antenna connectors and can be ordered with an location sharing with devices behind the subscriber unit or
optional 10 – 30 VDC input. over-the-air, using 802.16e protocol.

Specifications RUGGEDCOM WIN5100 RUGGEDCOM WIN5100-V RUGGEDCOM WIN5200

2 N-type antenna connectors for 2 N-type antenna connectors for
Antenna connection to external omni or connection to external omni or High gain integrated antenna
directional antenna directional antenna
Designed for vehicular, cabinet Designed for vehicular, cabinet
Flexible configurations Designed for pole top installations
or pole top installations or pole top installations
Single cable Power-over-Ethernet
Power supply PoE or Direct +/-12 to 24 VDC input PoE or Direct +/-12 to 24 VDC input
(PoE)
Integrated GPS No Optional No
Width 226 mm (8.9 in) 255 mm (10 in) 300 mm (11.8 in)
Height 80 mm (3.15 in) 92 mm (3.62 in) 310 mm (12.2 in)
Depth 92 mm (3.62 in) 108 mm (4.25 in) 91 mm (3.58 in)
Net weight 1.1 kg (2.4 lb) 1.2 kg (2.6 lb) 1.8 kg (4 lb)

6
 © Siemens AG 2016

Subscriber units | RUGGEDCOM WIN

RUGGEDCOM WIN5200
outdoor subscriber unit
The RUGGEDCOM WIN5200 is a broadband wireless Excellent performance in NLOS conditions
subscriber unit, compliant with the IEEE 802.16e • Overcoming multipath and deep fading,
standard, with a built-in directional antenna for use providing extended range and easy installation
in harsh environments. Automatic Transmit Power Control (ATPC)
• Optimal network deployment, tight frequency
The RUGGEDCOM WIN5200 greatly simplifies installation
reuse, and interference avoidance
with LEDs for signal strength alignment, automatic
connection to strongest serving base station and Numerous applications and services
automated service provisioning, based on authentication • Guaranteed data, VoIP, video and other
credentials. Specifically designed for point-to-multipoint services based on advanced QoS
broadband wireless access applications, the RUGGEDCOM
Robust hardware
WIN5200 provides efficient use of the wireless spectrum,
• -40° C to +75° C temperature range
supporting a range of applications.
Global availability
• Wide frequency band support for
deployments around the world

7
 © Siemens AG 2016

RUGGEDCOM WIN | Power injectors

RUGGEDCOM power injectors

RUGGEDCOM RP100 & RP110

The RUGGEDCOM RP100 & RP110 are single port 802.3at • Rugged Rated, -40° C to +85° C temperature range
Power-over-Ethernet injectors that provide the flexibility to • IEEE 1613 and IEC 61850-3 compliance means
power remote PoE devices using standard Cat 5 cable. continued operation in harsh environments
• Supports a wide range of AC and DC input voltages
Compatible with the latest 802.3at high-power PoE • Space-saving compact DIN rail design
standard and backward compatible with low-power • Reduces cabling, connection, and power supply
802.3af PoE devices, the RUGGEDCOM RP100 family requirements for PoE devices
provides versatility and investment protection to handle • Rated for 12, 24 – 48 VDC, 100 – 240 VAC, 125 – 250 VDC
future demands for increased power.
Serial Server
The RUGGEDCOM RP110 is a serial 802.3at Power-over- The RUGGEDCOM RP110 comes with an integrated
Ethernet injector with a built-in serial server, designed to serial server and includes a subset of the
bridge legacy serial devices onto an IP network and to features of the ROS® operating system, including:
power remote PoE devices, using standard Cat 5 cable. • Remote management and logging
• Serial IP encapsulation
Features • SNMP based network management
• Configuration-free, plug and play operation • Precision timing support
• 802.3at/af-compliant or RM version for connection • 1 RS485/RS422 port and 1 independent
to RUGGEDCOM WIN products RS232 port and 1 IRIG-B Output

Specifications RUGGEDCOM RP100 RUGGEDCOM RP110

Width 226 mm (8.9 in) 226 mm (8.9 in)
Height 80 mm (3.15 in) 80 mm (3.15 in)
Depth 92 mm (3.62 in) 92 mm (3.62 in)
Net weight 1.5 kg (3.3 lbs) 1.5 kg (3.3 lbs)

8
 © Siemens AG 2016

AeroMACS | RUGGEDCOM WIN

AeroMACS
AeroMACS (Aeronautical Mobile Airport Siemens offers 4 products for setting up wireless networks
in airports: the RUGGEDCOM WIN7251 base station,
Communications System) is a new data link technology the WIN5251 pole-mounted subscriber unit, the WIN5151,
intended to support airport surface communications. and the WIN5151-V-GPS mobile subscriber units.
This wireless technology is mandated by ICAO These products go beyond the AeroMACS standard feature
(International Civil Aviation Organization) and will set to provide the following additional functionality:
• Built-in ASN (Access Service Network) Gateway, with
be used for airport ground communications as well
embedded management for routing and mobility in the
as for a safe, orderly, and expeditious flow of air base station
traffic around the globe. • Full Layer 2 deployment option, including encrypted
multicast VLANs support
• IP-CS and ETH-CS co-existence
Using the 5000–5030 MHz and the 5091–5150 MHz band, • Highly accurate NTP Server at the subscriber unit to
allocated by the International Telecommunication Union, synchronize end devices
the RUGGEDCOM WIN products are optimized for • IEEE1588 synchronization support, with redundancy
AeroMACS based airport surface communications. to GPS
• Extended cell range: coverage beyond the required
With the use of an all IP radio, RUGGEDCOM WIN products 8 km and up to 40 km
can be easily integrated in existing airport networks or • SNMP-V3 management system
future networks such as PENS (Pan European Network
Services) in Europe, or SWIM (System Wide Information
Management) in North America.

RUGGEDCOM
GPS WIN5100-V
RUGGEDCOM
WIN7251

RUGGEDCOM
WIN7251

DHCP &
Radius
Servers Fuel
Truck

RUGGEDCOM RUGGEDCOM RUGGEDCOM RUGGEDCOM RUGGEDCOM RUGGEDCOM

WIN5251 WIN5100-V WIN5251 WIN5251 WIN5251 WIN5100-V
G_RCM0_XX_90005

Security Service Vehicles Airport Surface Detection Remote Transmitter/Receiver (RTR) Weather Airport
Equipment (ASIDE-X) and Remote Communications Monitoring Surveillance
Industrial Ethernet (Copper) Air/Ground (RCAG) (Wx) Radar (ASR)

RUGGEDCOM WIN AeroMACS installation locations and applications in an airport.

9
 © Siemens AG 2016

RUGGEDCOM WIN | Use cases

Use cases

RUGGEDCOM RUGGEDCOM
WIN7200 WIN7200

RUGGEDCOM RUGGEDCOM
RS900GP RS900GP

Secure Stationary Access

Secure Mobile
Wireless Access RUGGEDCOM
WIN5200
RUGGEDCOM
WIN5100

G_RCM0_XX_90001
Onboard Data
Terminal
Industrial Ethernet (Copper) RUGGEDCOM
Industrial Ethernet (Fiber Optic) RS900GP

Wireless broadband is widely used to enhance connectivity in the ITS industry.

Gigabit Ethernet Ring Control Center

RUGGEDCOM RUGGEDCOM RUGGEDCOM

RS900GP RS900GP RS900GP

RUGGEDCOM RUGGEDCOM RUGGEDCOM RUGGEDCOM

WIN7200 WIN7200 WIN7200 WIN5100

PoE PoE PoE

G_RCM0_XX_90006

Industrial Ethernet (Copper)

Fully integrated wireless solutions offer broadband data rates for the rail industry.

10
 © Siemens AG 2016

Use cases | RUGGEDCOM WIN

RUGGEDCOM RUGGEDCOM RUGGEDCOM

WIN5200 WIN5200 WIN7200

Control Room

HMI

RUGGEDCOM SIMATIC RUGGEDCOM SIMATIC

RP100 ET200SP RP100 ET200SP
SIMATIC RUGGEDCOM
Control Control S7-1200 RS900GP
Cabinet Cabinet
Tank Farm Diesel Tank

G_RCM0_XX_90019
Industrial Ethernet (copper)
WiMAX

PROFINET IO over wireless broadband for reliable monitoring of remote locations in the oil & gas industry.

RUGGEDCOM RUGGEDCOM RUGGEDCOM

WIN5200 WIN7200 WIN5200

RUGGEDCOM RUGGEDCOM RUGGEDCOM

RS900GP RS900GP RS900GP
G_RCM0_XX_90018

Industrial Ethernet (copper)

WiMAX

Offshore wireless long range monitoring and control of oil platforms.

11
 © Siemens AG 2016

RUGGEDCOM WIN | Ordering options

Ordering options
RUGGEDCOM WIN7000 Article number
High power base station, supporting 1350 MHz to 1400 MHz RUM:WIN7014 – ...
High power base station, supporting 1400 MHz to 1525 MHz RUM:WIN7015 – ...
High power base station, supporting 1800 MHz to 1830 MHz RUM:WIN7018 – ...
High power base station, supporting 1785 MHz to 1805 MHz RUM:WIN7018 – ...
High power base station, supporting 2300 MHz to 2400 MHz RUM:WIN7023 – ...
High power base station, supporting 2496 MHz to 2690 MHz RUM:WIN7025 – ...
High power base station, supporting 3400 MHz to 3600 MHz RUM:WIN7035 – ...
Ethernet interfaces
Ethernet copper interface PEC
Single-mode fiber optic interface – DC power SFD
Single-mode fiber optic interface – AC power SFA

RUGGEDCOM WIN7000 – Accessories Article number

Antennas
Omni antenna 1350-1500MHz 5dBi 360°, N-female (order 2 per base station) RUM:ANTN0018
GPS antenna for WIN7000 omni 1575.42MHz, +/- 1.023 30dB 360 degrees 3V TNC RUM:ANTN0023
Sector antenna 3.3-3.8GHz 17dBi 65° X-Pol RUM:ANTN0027
Sector antenna BST 3.3-3.8GHz 17dBi 90° X-Pol RUM:ANTN0029
Omni antenna 3.4-3.7GHz 8.5dBi 360° N-male (order 2 per base station) RUM:ANTN0040
Sector antenna 2300-2700MHz 16dBi 90° X-Pol RUM:ANTN0048
Omni antenna 2.3-2.7GHz 9dBi 360° N-female (order 2 per base station) RUM:ANTN0050
Sector antenna 1350-1500MHz 12dBi 90° X-Pol RUM:ANTN0054
High gain sector 1.71-1.88 GHz 17. 5 dBi 90° X-Pol RUM:ANTN0060
Omni antenna 1.7-1.9 GHz - 10 dBi N-female RUM:ANTN0061
Sector antenna 2.3-2.7 GHz, 16 dBi 65° X-Pol RUM:ANTN0068
Dual slant sector 1.71-1.880 GHz 17dBi 90° RUM:ANTN0070
Antenna 1390-1525MHz 16.0 dBi RUM:ANTN0071
Power supply
Power supply AC/DC 85-264V input, 48V output, 240W RUM:WIN1210
WIN1210, surge protection and barrier card for hazardous locations RUM:WIN1210
DC-DC converter 130 VDC – 48 VDC for WIN7000 series RUM:DCPS0008
Power cables
Combined cable (Power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 30m RUM:CBDC0110
Combined cable (Power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 60 m RUM:CBDC0111
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 80 m RUM:CBDC0112
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 30 m RUM:CBDC0113
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 60 m RUM:CBDC0114
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 80 m RUM:CBDC0115
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 2 m RUM:CBDC0131
Combined cable (power + Ethernet) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 2 m RUM:CBDC0133
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 30 m RUM:CBDC0120
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 60 m RUM:CBDC0121
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 80 m RUM:CBDC0122
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 30 m RUM:CBDC0123
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 60 m RUM:CBDC0124
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 80 m RUM:CBDC0125
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 2 m RUM:CBDC0135
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 120 m RUM:CBDC0136
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 30 m RUM:CBDC0137
Cable (power) for WIN1210, WIN1212 and WIN7000 for +48 VDC – 60 m RUM:CBDC0138

(1) Cables and antennas are recommended but need to be ordered separately

12
 © Siemens AG 2016

Ordering options | RUGGEDCOM WIN

RUGGEDCOM WIN7000 – Accessories Article number

Sector antenna
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 3 m RUM:CBWR0009
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 30 m RUM:CBWR0019
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 50 m RUM:CBWR0020
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 100 m RUM:CBWR0021
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 150 m RUM:CBWR0022
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC duplex – 200 m RUM:CBWR0023
Mounting kit
19“ rack mount kit for two WIN7000 base stations RUM:MKIT0060

RUGGEDCOM WIN7200 Article number

Standard power base station, supporting 2483 MHz to 2690 MHz RUM:WIN7225
Standard power base station, supporting 3300 MHz to 3400 MHz RUM:WIN7233
Standard power base station, supporting 3400 MHz to 3600 MHz RUM:WIN7235
Standard power base station, supporting 3550 MHz to 3720 MHz RUM:WIN7237
Standard power base station, supporting 4900 MHz to 5000 MHz RUM:WIN7249
Standard power base station, supporting 5000 MHz to 5150 MHz – AeroMACS RUM:WIN7251
Standard power base station, supporting 5725 MHz to 5850 MHz RUM:WIN7258

RUGGEDCOM WIN7200 – Accessories Article number

Antennas
Sector antenna 3.3-3.8GHz 17dBi 65° X-Pol RUM:ANTN0027
Sector antenna BST 3.3-3.8GHz 17dBi 90° X-Pol RUM:ANTN0029
Omni antenna 3.4-3.7GHz 8.5dBi 360° N-male (order 2 per base station) RUM:ANTN0040
Omni antenna 3.4-3.6GHz 6dBi 360° (order 2 per base station) RUM:ANTN0043
Sector antenna 2300-2700MHz 16dBi 90° X-Pol RUM:ANTN0048
Omni antenna 2.3-2.7GHz 9dBi 360° N-female (order 2 per base station) RUM:ANTN0050
Omni antenna 2.5-2.7GHz 5.5dBi 360° N-male (order 2 per base station) RUM:ANTN0051
Omni antenna 3.6-3.8GHz 6dBi 360° (order 2 per base station) RUM:ANTN0057
Sector antenna 2.3-2.7 GHz, 16 dBi 65° X-Pol RUM:ANTN0068
Sector antenna (dual slant) 4.9-5.95 GHz 16dBi 90° RUM:ANTN0074
Cables
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 2 m RUM:CBWR0014-02M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 15 m RUM:CBWR0014-15M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 30 m RUM:CBWR0014-30M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 45 m RUM:CBWR0014-45M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 60 m RUM:CBWR0014-60M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 75 m RUM:CBWR0014-75M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 90 m RUM:CBWR0014-90M
Outdoor combined cable (power + Ethernet) for WIN7200 for +48 VDC – 500 m (batch for self-connectorization) RUM:CBWR0014-500
Serial cable UART 3P to DB9F for WIN7200 RUM:CBDC0017
Power Supplies
See RUGGEDCOM RP100/RP110 ordering information on page 15

13
 © Siemens AG 2016

RUGGEDCOM WIN | Ordering options

RUGGEDCOM WIN5100 Article number

Vehicular subscriber unit, supporting 1350 MHz to 1525 MHz RUM:WIN5114 – ...
Vehicular subscriber unit, supporting 1785 MHz to 1805 MHz RUM:WIN5118-WR – ...
Vehicular subscriber unit, supporting 1800 MHz to 1830 MHz RUM:WIN5118 – ...
Vehicular subscriber unit, supporting 2300 MHz to 2400 MHz RUM:WIN5123 – ...
Vehicular subscriber unit, supporting 2496 MHz to 2690 MHz RUM:WIN5125 – ...
Vehicular subscriber unit, supporting 3300 MHz to 3600 MHz RUM:WIN5135 – ...
Vehicular subscriber unit, supporting 3550 MHz to 3800 MHz RUM:WIN5137 – ...
Vehicular subscriber unit, supporting 4900 MHz to 5000 MHz RUM:WIN5149 – ...
Vehicular subscriber unit, supporting 5000 MHz to 5150 MHz – AeroMACS RUM:WIN5151 – ...
Vehicular subscriber unit, supporting 5725 MHz to 5850 MHz RUM:WIN5158 – ...
Power options ...
Direct 10-30 VDC input with separate Ethernet connector, equipped with DC power cable DC
Standard commercial grade AC power injector – power AC

RUGGEDCOM WIN5100-V Article number

Enhanced vehicular subscriber unit, supporting 3550 MHz to 3800 MHz, integrated 9-36 VDC power supply RUM:WIN5137-V – ...
Enhanced vehicular subscriber unit, supporting 4900 MHz to 5000 MHz, integrated 9-36 VDC power supply RUM:WIN5149-V – ...
Enhanced vehicular subscriber unit, supporting 5000 MHz to 5150 MHz,
RUM:WIN5151-V – ...
integrated 9-36 VDC power supply – AeroMACS
Enhanced vehicular subscriber unit, supporting 5725 MHz to 5850 MHz, integrated 9-36 VDC power supply RUM:WIN5158-V – ...
Add-on options
No add-on
Global Positioning System support for WAAS (USA system), EGNOS (European system),
GPS
MSAS (Japanese system)

RUGGEDCOM WIN5100 & WIN5100–V – Accessories Article number

Data / PoE cables
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 2 m RUM:CBWR0014-02M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 15 m RUM:CBWR0014-15M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 30 m RUM:CBWR0014-30M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 45 m RUM:CBWR0014-45M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 60 m RUM:CBWR0014-60M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 75 m RUM:CBWR0014-75M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 90 m RUM:CBWR0014-90M
Outdoor cable (Ethernet) for WIN5100 & WIN5100-V for +48 VDC – 500 m (batch for self-connectorization) RUM:CBWR0014-500
Power cables
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors to LC Duplex – 3 m RUM:CBWR0009
Fiber optic cable (Ethernet), single-mode, 1310 nm, sealed LC duplex connectors To LC Duplex – 30 m RUM:CBWR0019
Antennas
Omni-directional antenna3.4-3.6GHz 6dBi 360° RUM:ANTN0043
Omni-directional antenna 2.5-2.7GHz 5.5dBi 360° N-male RUM:ANTN0051
Omni-directional antenna 3.6-3.8GHz 6dBi 360° RUM:ANTN0057
Antenna (dual slant) 1.3-1.525GHz 10dBi RUM:ANTN0063
Antenna flat 3.3-3.8GHz 18dBi 18° N-female RUM:ANTN0064
Vehicular antenna 0.68-6.0 GHz, 6dBi RUM:ANTN0065
Antenna (dual slant) 1.78-1.85GHz 12dBi N-female RUM:ANTN0066
Sector antenna 2.3-2.7 GHz, 16 dBi 65° X-Pol RUM:ANTN0068
Antenna (dual slant) 4.9-6.1GHz 22.5dBi N-female RUM:ANTN0073
Omni-directional antenna 806-5935MHz 9.5 dBi N-female RUM:ANTN0075
Omni-directional antenna 4.9-5.875GHz 9.5dBi N-female RUM:ANTN0076
Vehicular antenna 2.3-6.1GHz 8dBi N-female RUM:ANTN0077

14
 © Siemens AG 2016

Ordering options | RUGGEDCOM WIN

RUGGEDCOM WIN5200 Article number

Outdoor subscriber unit, supporting 1350 MHz to 1525 MHz RUM:WIN5214
Outdoor subscriber unit, supporting 1785 MHz to 1805 MHz RUM:WIN5217
Outdoor subscriber unit, supporting 1800 MHz to 1830 MHz RUM:WIN5218
Outdoor subscriber unit, supporting 2300 MHz to 2400 MHz RUM:WIN5223
Outdoor subscriber unit, supporting 2496 MHz to 2690 MHz RUM:WIN5225
Outdoor subscriber unit, supporting 3300 MHz to 3600 MHz RUM:WIN5235
Outdoor subscriber unit, supporting 3550 MHz to 3800 MHz RUM:WIN5237
Outdoor subscriber unit, supporting 4900 MHz to 5000 MHz RUM:WIN5249
Outdoor subscriber unit, supporting 5000 MHz to 5150 MHz – AeroMACS RUM:WIN5251
Outdoor subscriber unit, supporting 5725 MHz to 5850 MHz RUM:WIN5258

RUGGEDCOM WIN5200 – Accessories Article number

Data / PoE cables
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 2 m RUM:CBWR0014-02M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 15 m RUM:CBWR0014-15M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 30 m RUM:CBWR0014-30M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 45 m RUM:CBWR0014-45M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 60 m RUM:CBWR0014-60M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 75 m RUM:CBWR0014-75M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 90 m RUM:CBWR0014-90M
Outdoor cable (Ethernet) for WIN5200 for +48 VDC – 500 m (batch for self-connectorization) RUM:CBWR0014-500

RUGGEDCOM Power-over-Ethernet injector Article number

RUGGEDCOM RP100 6GK6010-0AP0 . – . AA .
High voltage (85 – 264 VAC / 88 – 300 VDC), standard PoE (803.2at) 1 1
High voltage (85 – 264 VAC / 88 – 300 VDC), for RUGGEDCOM WIN only 1 2
Low voltage (10 – 60 VDC), standard PoE (803.2at) 2 1
Low voltage (10 – 60 VDC), for RUGGEDCOM WIN only 2 2
Manufacturing modification
None 0
Conformal coating 1

RUGGEDCOM Power-over-Ethernet injector with built in serial server Article number

RUGGEDCOM RP110NC 6GK6011-0AP2 . – . AA .
RUGGEDCOM RP110 6GK6011-0AP1 . – . AA .
High voltage (85 – 264 VAC / 88 – 300 VDC), for RUGGEDCOM WIN only 1 2
Low voltage (10 – 60 VDC), for RUGGEDCOM WIN only 2 2
Manufacturing modification
None 0
Conformal coating 1

With the RUGGEDCOM Selector you can

transfer the order number to the Siemens
Industry Mall and order your products.

To use the RUGGEDCOM Selector for the selection

and configuration of RUGGEDCOM products, visit:
siemens.com/ruggedcom-selector

For more information on wireless approvals, visit:

siemens.com/wireless-approvals

15
 © Siemens AG 2016

RUGGEDCOM WIN | Category

For more information, please visit: Security information

siemens.com/ruggedcom-win
Siemens provides products and solutions with industrial
Siemens AG
security functions that support the secure operation of
Process Industries and Drives
Process Automation plants, systems, machines and networks.
Postfach 48 48
In order to protect plants, systems, machines and networks
90026 Nürnberg
Germany against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art
Siemens Canada Limited
300 Applewood Crescent
industrial security concept. Siemens’ products and solutions
Concord, Ontario, L4K 5C7 only form one element of such a concept.
Canada
Customer is responsible to prevent unauthorized access
© Siemens AG 2016 to its plants, systems, machines and networks. Systems,
Subject to change without prior notice
machines and components should only be connected to
Article No. 6ZB5531-0AH02-0BA1
W-FPN7Z-PD-PA216 / Dispo 26000 the enterprise network or the internet if and to the extent
BR 1016 2. PES 16 En necessary and with appropriate security measures
Printed in Germany (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens’ guidance on appropriate security
measures should be taken into account. For more
information about industrial security, please visit:
siemens.com/industrialsecurity
Siemens’ products and solutions undergo continuous
development to make them more secure. Siemens strongly
recommends to apply product updates as soon as available
and to always use the latest product versions. Use of
product versions that are no longer supported, and failure
to apply latest updates may increase customer’s exposure
to cyber threats.
To stay informed about product updates, subscribe
to the Siemens Industrial Security RSS Feed under:
siemens.com/industrialsecurity

The information provided in this brochure contains descriptions or

characteristics of performance which in case of actual use do not always
apply as described or which may change as a result of further development
of the products. An obligation to provide the respective characteristics shall
only exist if expressly agreed in the terms of contract. Availability and
technical specifications are subject to change without notice. All product
designations may be trademarks or product names of Siemens AG or
supplier companies whose use by third parties for their own purposes
could violate the rights of the owners.

Scan this
QR code
for more
information