FAIR GEMS ACADEMY INCORPORATED

Catubig, Northern Samar

SENIOR HIGH SCHOOL DEPARTMENT
SUMMATIVE TEST IN CSS – 12
2ND GRADING PERIOD

Name:________________________________Yr. & Section:___________Date:_______Score:____

Directions: Read and understand each question. Write the letter of the correct answer on the space
provided before each number.
____1. What disk partition utility in Windows can be used to create a bootable USB?
A. Rufus B. Diskpart C. ISO D. RT Seven Lite
____2. What button in CDBurnerXP should be clicked to start the burn process?
A. OK B. Burn C. Burn disc D. Start
____3. Which command in Diskpart follows the command “active”?
A. list disk B. exit C. clean D. format fs=ntfs
____4. Which is the first step in creating a bootable USB using Rufus?
A. Look for the Windows Image File (ISO) and select it.
B. Click the Start button. When prompted with a Warning: ALL DATA… Click OK.
C. Right-click the Rufus Application then select Open to launch the program
D. Plug in the USB Drive to any USB Port in your personal computer.
____5. Which of the following commands in Diskpart can cause an error?
A. format fs=ntfs quick C. dispart
B. sel par 1 D. clean
____6. Which is NOT an advantage of using RT Seven Lite?
A. It cuts installation time in half.
B. It can set default themes, fonts, wallpapers, and logon screen
C. It saves space by removing apps and services that are not needed.
D. It removes malware in the computer.
____7. In what task or section in RT Seven Lite can we select multiple drivers?
A. ISO-bootable B. Customization C. Integration D. Tweaks
8. Which contains a disk image that is identical to the boxed product that you would purchase at any
software retailer?
A. Diskpart C. Bootable Installation Package
B. Bootable device D. ISO
____9. Which is NOT a possible use of a bootable USB flash drive?
A. Use a recovery system to repair your PC
B. “Clean” reinstallation of the operating system
C. Store an image of the operating system
D. Use as installer for applications
____10. What does the Diskpart command “clean” do?
A. It marks the current partition as active.
B. It assigns a drive letter to the USB flash drive.
C. It delete all files from the USB flash drive.
D. It creates the main partition.
____11. Which Diskpart command displays all available storage devices in the computer?
A. select disk 1 C. show disk
B. create partition primary D. list disk
____12. Which file format can support any file size?
A. GPT B. FAT32 C. NTFS D. MBR
____13. Which is NOT a requirement in making a bootable USB drive?
A. Windows Diskpart
B. USB flash drive with at least 8 GB of storage
C. ISO image of the operating system
D. Antivirus
____14. What does NTFS mean?
A. New Transfer Files System C. New Technology Files System
B. New Transfer Files Service D. New Technology Files Service
____15. Which is the file extension of a disc image file?
A. .dvd B. .img C. .iso D. .disc
____16. What task or section in RT Seven Lite should be selected if you want to remove a Windows
feature?
A. Integration B. Tweaks C. Components D. ISO-bootable
____17. Which software tool can be used to download Microsoft Updates?
A. RT Seven Lite B. Autopatcher C. Rufus D. Diskpart
____18. Which mode in ISO-bootable task should be selected if you want to burn a disc?
A. Burn ImageB. Burn C. Burn Disc D. Direct Burn
____19. Which statement about FAT32 file format is TRUE?
A. It can support any file size. C. It can support files up to 4GB only.
B. It is limited to Windows OS only. D. It can support files up to 2GB only.
____20. In Rufus, in what section can you check the USB flash drive?
A. Boot selection B. Volume label C. Device D. Status
____21. The primary goal of Occupational Health is about:
A. Protecting the safety, health and welfare of people engaged in work
B. Protecting co-workers, family members employers, suppliers, nearby communities and other
members of the public who are influenced by the workplace environment
C. Protecting the natural environment
D. None of the above.
____22. What is a computer?
A. A programmable electronic device that processes data via instructions to output information for
future use.
B. Raw facts and figures that has no meaning processed via a set of instructions.
C. Meaning attached to data letters, pictures, symbols or sounds.
D. All of the above
____23. In order to maintain good health standards at the workplace the following rules must be adheredto:
A. Cleanliness, adequate sanitary facilities, Protection against dangerous substances
B. Wellness of workers
C. Promoting a positive social climate
D. None of the above
____24. What is the best way to avoid tripping at the workplace?
A. Make sure the floor is uneven.
B. Have the floor cleaned extra often.
C. Make sure the workplace is tidy.
D. None of the above.
____25. When the task calls for the removal of parts use .
A. cleaning tools C. loosening and tightening tools
 B. marking tools D. measuring tools
____26. One of the factors to consider when planning and preparing for the task in order to avoid accident is
A. materials C. place
B. safety D. waste disposal
for nos. 27-30, choose your answers from the box.

A. Violation of Privacy
B. Impact on the Environment
C. Public Safety
D. Health Risk
E. Impact on Labor Force

____27. Adults, teen, and children around

the world are using computers to share publicly their photos, videos, journals, music, and
other personal information.
____28. Computer manufacturing processes and computer waste are depleting natural resources
and polluting the environment.
____29. Although computers have improved productivity in many ways and created an entire
industry with hundreds of thousands of new jobs, the skills of millions of workers and managers
have been replaced by computers.
____30. Prolonged or improper computer use can lead to injuries or disorders of the hands, wrists,
elbows, eyes, necks, and back.
for nos. 31-35, choose your answers from the box.

A. Place
B. Waste Disposal
C. Tools/Equipment
D. Safety
E. Procedure/Task

____31. An ideal work space in working with computers is something where freedom to move freely is
provided
____32. Task-related consumable parts are selected and used according to their manufacturer’s instructions.
____33. Using appropriate tools is important for a technician to provide a competitive and efficientservice.
____34. Always be mindful of the safety precautions when working with computers.
____35. Identify what task to perform before identifying materials and tools to use.

Keep up the Good work!

PREPARED BY: CHECKED BY: APPROVED BY:

JOANNE PAULINE T. RUELA GINO C. TALENJALE EMERSON H. ANGELES

Subject Teacher SHS Coordinator School Principal