AJAX™ INTEGRAL
ENGINE-COMPRESSOR DPC-2804
800-845 bhp, 440 rpm
Robust, reliable Ajax engines have been manufactured in the United States
longer than any other OEM brand engines, with continuous innovations
and technologies adding compliance, strength and simplicity to the original
design. The DPC-2804 integral engine compressor rated at 800-845 bhp
and features a slow-speed, two-cycle engine design that results in less
wear and fewer moving parts. It offers greater reliability and efficiency
than high-speed separable units. As a result, operating costs are
substantially lower over the life of your equipment. Over 330 DPC-2804s
have been built. The DPC-2804 is the economic choice for a variety of
applications, including gas gathering, injection, processing, transmission,
and fuel gas boosting.
Benefits Features
› Minimum maintenance › Integral crankshaft design
› Higher availability › Slow operating speed
› Higher resale value › Fewer moving parts
› Reduced parts stocking requirements › Technically current design
› Single source responsibility available › Low-cycle, low BMEP engine
› More gas compressed per BHP than › Larger valve area
high-speed separable units
› Higher mechanical efficiency
› Flexible
Model STD LE
No. of Cylinders 4 4
Power 845 bhp (630 kWb) 800 bhp (597 kWb)
Rated Speed 440 rpm 440 rpm
Bore & Stroke 15" × 16" (381 mm × 406 mm) 15" × 16" (381 mm × 406 mm)
Piston Displacement 11,308 in (185 l)
3
11,308 in3 (185 l)
BMEP 67.2 psi (4.6 bar) 63.7 psi (4.4 bar)
Piston Speed 1,173 ft/min (6 m/s) 1,173 ft/min (6 m/s)
Legends don’t stop. We make sure of it.™
Call +1-844-RECIP-43 (international: +1-713-354-1299)
24/7 TECH SUPPORT:
[email protected]cooperservices.com
Model STD LE
Fuel Gas System 1
Fuel pressure range 150 psi (10.3 bar) 150 psi (10.3 bar)
Exhaust System 2
Exhaust Temperature 465°F (241°C) 515°F (268°C)
Exhaust Flow 233 lb/min (106 kg/min) 239 lb/min (108 kg/min)
Cooling Water System
Capacity 120 gal (454 l) 120 gal (454 l)
Lube Oil System 3
Capacity 95 gal (360 l) 95 gal (360 l)
Consumption 28.2 pints/day (13.3 l/day) 28.2 pints/day (13.3 l/day)
Crankcase Makeup 6.6 pints/day (3.1 l/day) 6 pints/day (2.8 l/day)
Brake Specific Fuel Consumption
100% Load (LHV) 8,000 Btu/bhp-hr (11,319 kJ/kWh) 7,800 Btu/bhp-hr (11,036 kJ/kWh)
Engine Emissions 2
NOx 12 g/bhp-hr 2 g/bhp-hr
CO 1.2 g/bhp-hr 1.2 g/bhp-hr
NMHC 0.7 g/bhp-hr 0.6 g/bhp-hr
VOC 0.5 g/bhp-hr 0.5 g/bhp-hr
Formaldehyde 0.3 g/bhp-hr 0.3 g/bhp-hr
CO2 469 g/bhp-hr 458 g/bhp-hr
Compressor Specifications
No. of Throws 3 3
Stroke 11" (279 mm) 11" (279 mm)
Piston Speed 807 ft/min (4 m/s) 807 ft/min (4 m/s)
Rod Load 40,000 lb (178 kN) 40,000 lb (178 kN)
Rod Diameter 2.5" (64 mm) 2.5" (64 mm)
Crankshaft Centerline 20" (508 mm) 20" (508 mm)
Dry Weight
Frame Weight 48,700 lb (22,090 kg) 48,700 lb (22,090 kg)
Dimensions
Frame Length 171" (4,353 mm) 171" (4,353 mm)
Frame Width 157" (3,987 mm) 157" (3,987 mm)
Frame Height 74" (1,881 mm) 74" (1,881 mm)
Stack Diameter 17¼" (438 mm) 17¼" (438 mm)
Stack Height 241" (6,121 mm) 241" (6,121 mm)
Flywheel
Outside Diameter 48" (1,219 mm) 48" (1,219 mm)
Weight 2,200 lb (998 kg) 2,200 lb (998 kg)
1
Fuel gas system pressure noted is maximum pressure at customer connection
2
Exhaust and emissions noted based on: PLQNG, 1500 FASL elevation, 65°F ambient temperature for STD and LE
3
Lube oil system consumption rates based on full load and full speed operation. Values do not indicate break-in consumption rates.
Legends don’t stop. We make sure of it.™
Call +1-844-RECIP-43 (international: +1-713-354-1299)
24/7 TECH SUPPORT:
[email protected]cooperservices.com
© 2020 GE Oil & Gas Compression Systems, LLC – All rights reserved. AJI20024 04/2020
GE Oil & Gas Compression Systems, LLC reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Con-
tact your Cooper Machinery Services representative for the most current information. Ajax, the Ajax logo and the Cooper Machinery Services logo and tagline are trademarks of GE Oil & Gas Compression
Systems, LLC.
