Broadcast Electronics

4100 North 24th Street, Quincy, Illinois 62305 USA • Phone (217) 224-9600 • Fax (217) 224-9607 • www.bdcast.com • [email protected]

STX LP
1 kW, 2 kW, 3 kW, 5 kW
FM Transmitters
Instruction Manual
597-4102
Rev J
May 14, 2013
STX LP – 1 kW, 2 kW, 3 kW, 5 kW FM Transmitters
Instruction Manual

©2013 Broadcast Electronics. All rights reserved.

The information in this publication is subject to improvement and change without notice. Although
every effort is made to ensure the accuracy of the information in this manual, Broadcast Electronics
accepts no responsibility for any errors or omissions. Broadcast Electronics reserves the right to
modify and improve the design and specifications of the equipment in this manual without notice.
Any modifications shall not adversely affect performance of the equipment so modified.

Proprietary Notice
This document contains proprietary data of Broadcast Electronics Inc. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, translated into any other
language in any form or by any means, electronic or mechanical, including photocopying or
recording, for any purpose, without the express written permission of Broadcast Electronics.

Trademarks
Broadcast Electronics and the BE logo are registered trademarks of Broadcast Electronics.

All other trademarks are property of their respective owners.

 i

Broadcast Electronics
Product Warranty (Two-Year Limited)

BE hereby warrants all new products manufactured by BE against any defects in material or
workmanship at the time of delivery thereof, or that develop under normal use within a period of
two (2) years from the date of shipment.

BE reserves the right to repair equipment under warranty with new or refurbished equipment or
parts. BE’s sole responsibility with respect to any equipment or parts not conforming to this
warranty is to replace or repair such equipment upon the return thereof F.O.B. to BE’s factory in
Quincy, Illinois, U.S.A. In the event of replacement pursuant to the foregoing warranty, only the
unexpired portion of the warranty from the time of the original purchase will remain in effect for
any such replacement.

This warranty shall exclude the following products, component parts and/or assemblies:

(a) Transmitter power output tubes shall only carry the original manufacturers’ or
suppliers’ standard warranty in effect on their original shipment date.
(b) All computers, computer peripherals, cables, hard disk drives, etc., shall only
carry the manufacturers’ or suppliers’ standard warranty in effect on their
original shipment date.
(c) “Components”, defined as separate and individual parts (e.g. transistors,
integrated circuits, capacitors, resistors, inductors, fans, etc), resold by BE from
another manufacturer or supplier, shall only carry a 90 day warranty, effective
the date of shipment. Any such ‘Components’ being returned for warranty claim
must be (1) returned in their original packaging and (2) must be in new, unused
condition.
BE is unable to process or resolve component defects or performance concerns
on components that have been soldered, installed, wired or in any way altered
from their new condition.
(d) “Resale Equipment”, defined as equipment purchased from another
manufacturer or supplier, then resold by BE, shall only carry such manufacturers’
or suppliers’ standard warranty in effect as of the original shipment date. All
warranty claims against any and all ‘resale equipment’ sold by BE must be filed
directly with the original equipment manufacturer. BE is unable to process or
resolve equipment defects or performance concerns on products or services not
manufactured by BE.

This warranty shall not extend to claims resulting from any acts of God, terrorism, war, defects or
failures caused by Purchaser or user abuse or misuse, operator error, or unauthorized attempts to
repair or alter the equipment in any way.

Under no circumstances shall BE be responsible for indirect, incidental or consequential damages,

including, but not limited to transportation costs, non-authorized repair or service costs,
downtime costs, costs for substituting equipment or loss of anticipated profits or revenue,
incurred by Purchaser, whether based in contract, tort or for negligence or breach of statutory
duty or otherwise.
The terms of the foregoing warranty shall be null and void if the equipment has been altered or
repaired without specific written authorization from BE, or if not installed according to BE’s
instruction manuals, including, but not limited to, the absence of proper grounding, surge (TVSS)
protection on the AC circuit panel or proper lightning protection/grounding on all output circuits,
or if equipment is operated under environmental conditions or circumstances other than those
specifically described in BE’s product literature or instruction manual which accompany the
equipment. The warranty shall be voided if the product or subassembly is equipped with a tamper
seal and that tamper seal is broken. BE shall not be liable for any expense of any nature
whatsoever incurred by the original user without prior written consent of BE. The warranty

©2013 Broadcast Electronics i

ii

provided herein shall terminate at the end of the period set forth above. This warranty extends
only to the original Purchaser and is not transferable. There are no third party beneficiaries of any
of the provisions of this warranty. If the equipment is described as “used” equipment, it is sold as
is and where is and no warranty applies unless authorized in writing. .

EXCEPT AS SET FORTH HEREIN, AS TO TITLE AND AS SPECIFICALLY REQUIRED BY LAW, THERE ARE
NO OTHER WARRANTIES, OR ANY AFFIRMATIONS OF FACT OR PROMISES BY BE, WITH
REFERENCE TO THE EQUIPMENT, OR TO MERCHANTABILITY, FITNESS FOR A PARTICULAR
APPLICATION, SIGNAL COVERAGE, INFRINGEMENT, OR OTHERWISE, WHICH EXTEND BEYOND
THE DESCRIPTION OF THE EQUIPMENT ON THE FACE HEREOF.

©2013 Broadcast Electronics

 iii

IMPORTANT INFORMATION

EQUIPMENT LOST OR DAMAGED IN TRANSIT -

When delivering the equipment to you, the truck driver or carriers’ agent will present a receipt for
your signature. Do not sign it until you have:
1) Inspected the containers for visible signs of damage and 2) Counted the containers and
compared with the amount shown on the shipping papers. If a shortage or evidence of damage is
noted, insist that notation to that effect be made on the shipping papers before you sign them.
Further, after receiving the equipment, unpack it and inspect thoroughly for concealed damage. If
concealed damage is discovered, immediately notify the carrier, confirming the notification in
writing, and secure an inspection report. This item should be unpacked and inspected for damage
WITHIN 15 DAYS after receipt. Claims for loss or damage will not be honored without proper
notification of inspection by the carrier.

RF PRODUCT TECHNICAL ASSISTANCE, REPAIR SERVICE, PARTS -

Technical assistance is available from Broadcast Electronics by letter, prepaid telephone or E-mail.
Equipment requiring repair or overhaul should be sent by common carrier, prepaid, insured, and
well protected. If proper shipping materials are not available, contact the RF Technical Services
Department for a shipping container. Do not mail the equipment. We can assume no liability for
inbound damage, and necessary repairs become the obligation of the shipper. Prior arrangement
is necessary. Contact the RF Technical Services Department for a Return Authorization.
Emergency and warranty replacement parts may be ordered from the following address. Be sure
to include the equipment model number, serial number, part description, and part number. Non-
emergency replacement parts may be ordered directly from the Broadcast Electronics stock room
at the number shown below.

RF TECHNICAL SERVICES -
Telephone: +1 (217) 224-9617
E-Mail: [email protected]
Fax: +1 (217) 224-6258

FACILITY CONTACTS -
Broadcast Electronics, - Quincy Facility
4100 N. 24th St. P.O. BOX 3606
Quincy, Illinois 62305
Telephone: +1 (217) 224-9600
Fax: +1 (217) 224-6258
General E-Mail: [email protected]
Web Site: www.bdcast.com

PARTS -
Telephone: +1 (217) 224-9617
E-Mail: [email protected]

©2013 Broadcast Electronics iii

iv

RETURN, REPAIR, AND EXCHANGES -

Do not return any merchandise without our written approval and Return Authorization. We will
provide special shipping instructions and a code number that will assure proper handling and
prompt issuance of credit. Please furnish complete details as to circumstances and reasons when
requesting return of merchandise. All returned merchandise must be sent freight prepaid and
properly insured by the customer.

MODIFICATIONS -
Broadcast Electronics, reserves the right to modify the design and specifications of the equipment
in this manual without notice. Any modifications shall not adversely affect performance of the
equipment so modified.

©2013 Broadcast Electronics

 v

SAFETY PRECAUTIONS

PLEASE READ AND OBSERVE ALL SAFETY PRECAUTIONS//

ALL PERSONS WHO WORK WITH OR ARE EXPOSED TO POWER TUBES, POWER
TRANSISTORS, OR EQUIPMENT WHICH UTILIZES SUCH DEVICES MUST TAKE
PRECAUTIONS TO PROTECT THEMSELVES AGAINST POSSIBLE SERIOUS BODILY INJURY.
EXERCISE EXTREME CARE AROUND SUCH PRODUCTS. UNINFORMED OR CARELESS
OPERATION OF THESE DEVICES CAN RESULT IN POOR PERFORMANCE, DAMAGE TO THE
DEVICE OR PROPERTY, SERIOUS BODILY INJURY, AND POSSIBLY DEATH.

DANGEROUS HAZARDS EXIST IN THE OPERATION OF POWER TUBES AND

POWER TRANSISTORS -
The operation of power tubes and power transistors involves one or more of the following
hazards, any one of which, in the absence of safe operating practices and precautions, could
result in serious harm to personnel.

A. HIGH VOLTAGE - Normal operating voltages can be deadly. Additional information

follows.

B. RF RADIATION - Exposure to RF radiation may cause serious bodily injury possibly

resulting in Blindness or death. Cardiac pacemakers may be affected. Additional
information follows.

C. HOT SURFACES Surfaces of air-cooled radiators and other parts of tubes can reach
temperatures of several hundred degrees centigrade and cause serious burns if
touched. Additional information follows.

D. RF BURNS Circuit boards with RF power transistors contain high RF potentials. Do not
operate an RF power module with the cover removed.

©2013 Broadcast Electronics v

vi

HIGH VOLTAGE –

Many power circuits operate at voltages high enough to kill through electrocution. Personnel
should always break the primary AC Power when accessing the inside of the transmitter.

RADIO FREQUENCY RADIATION

Exposure of personnel to RF radiation should be minimized, personnel should not be permitted in

the vicinity of open energized RF generating circuits, or RF transmission systems (waveguides,
cables, connectors, etc.), or energized antennas. It is generally accepted that exposure to “high
levels” of radiation can result in severe bodily injury including blindness. Cardiac pacemakers may
be affected.

The effect of prolonged exposure to “low level” RF radiation continues to be a subject of

investigation and controversy. It is generally agreed that prolonged exposure of personnel to RF
radiation should be limited to an absolute minimum. It is also generally agreed that exposure
should be reduced in working areas where personnel heat load is above normal. A 10 mW/cm2
per one tenth hour average level has been adopted by several U.S. Government agencies including
the Occupational Safety and Health Administration (OSHA) as the standard protection guide for
employee work environments. An even stricter standard is recommended by the American
National Standards Institute which recommends a 1.0 mW/cm2 per one tenth hour average level
exposure between 30 Hz and 300 MHz as the standard employee protection guide (ANSI C95.1-
1982).
RF energy must be contained properly by shielding and transmission lines. All input and output RF
connections, such as cables, flanges and gaskets must be RF leak proof. Never operate a power
tube without a properly matched RF energy absorbing load attached. Never look into or expose
any part of the body to an antenna or open RF generating tube or circuit or RF transmission
system while energized. Monitor the tube and RF system for RF radiation leakage at regular
intervals and after servicing.

HOT SURFACES –

The power components in the transmitter are cooled by forced-air and natural convection. When
handling any components of the transmitter after it has been in operation, caution must always
be taken to ensure that the component is cool enough to handle without injury.

©2013 Broadcast Electronics

 vii

Table of Contents
1  Overview ........................................................................................................... - 1 -

2  Installation Preparation .................................................................................... - 8 - 

2.1  Verify Contents of Shipment ............................................................................. - 8 - 
2.2  1 kW Models - ................................................................................................. - 8 - 
2.3  2 kW Models - ................................................................................................. - 8 - 
2.4  3 kW Models - ................................................................................................. - 8 - 
2.5  5 kW Models - ................................................................................................. - 8 - 
2.6  Tools / Items Needed For Installation (not supplied) .......................................... - 8 - 
2.7  Mounting Considerations ................................................................................. - 8 - 
2.8  Estimated Time for Installation / Setup .............................................................. - 8 -

3  STXLP-1kW Rear Panel ....................................................................................... - 9 -

4  STXLP-1kW Assembly Front Panel Features .................................................... - 14 -

5  STXLP-2kW, STXLP-3kW, And STXLP-5kW PA Assembly Front Panel Features - 16 -

6  STXLP-2kW, STXLP-3kW, STXLP-5kW Combiner Assy Front Panel Features .... - 17 -

7  Installation ...................................................................................................... - 18 - 
7.1  Install Into Equipment Rack ............................................................................ - 18 - 
7.2  1 kW Models - ............................................................................................... - 18 - 
7.3  2 kW Models - ............................................................................................... - 18 - 
7.4  3 kW Models - ............................................................................................... - 18 - 
7.5  5 kW Models - ............................................................................................... - 18 - 
7.6  RFI/EMI Protection - Ferrite Ring Installation .................................................... - 19 - 
7.7  AES Connections – Requires Optional Stereo Generator PCB ............................ - 19 - 
7.8  ANALOG L/R Connections – Requires Optional Stereo Generator PCB............... - 19 - 
7.9  Composite Connections .................................................................................. - 22 - 
7.10  SCA1 Connections ..................................................................................... - 22 - 
7.11  SCA2 Connections ..................................................................................... - 22 - 
7.12  RDS Connections........................................................................................ - 22 - 
7.13  19 kHz Out Connections ............................................................................ - 22 - 
7.14  Exciter - Using Only the Internal Exciter ...................................................... - 22 - 
7.15  Exciter - Using Only the External Exciter ...................................................... - 22 - 
7.16  Exciter - Using Both the Internal and External Exciter .................................. - 23 - 
7.17  Ethernet Connections ................................................................................. - 23 - 
7.18  Remote Control Unit Connections .............................................................. - 23 - 
7.19  Failsafe Connection .................................................................................... - 24 - 
7.20  RF Sample Connection ............................................................................... - 24 - 
7.21  HD System Connections ............................................................................. - 24 - 
7.22  RF Out Connection ..................................................................................... - 24 - 
7.23  RF/Control Connections – 2 kW Models ...................................................... - 24 - 
7.24  RF/Control Connections – 3 kW Models ...................................................... - 25 - 

©2013 Broadcast Electronics vii

 viii

7.25  RF/Control Connections – 5 kW Models ...................................................... - 25 - 

7.26  Ground Connection ................................................................................... - 25 - 
7.27  AC Input Connection ................................................................................. - 26 - 
7.28  1 kW Models - ........................................................................................... - 26 - 
7.29  2 kW Models – .......................................................................................... - 26 - 
7.30  3 kW Models – .......................................................................................... - 26 - 
7.31  5 kW Models – .......................................................................................... - 26 -

8  Initial Turn On and Setup ................................................................................ - 28 - 

8.1  Overview ........................................................................................................ - 28 - 
8.2  Initial AC On................................................................................................... - 28 - 
8.3  Set The Power Output .................................................................................... - 28 - 
8.4  Set The Frequency .......................................................................................... - 30 - 
8.5  Select The Audio Input. .................................................................................. - 32 - 
8.6  Calibrate the Audio/SCA/RDS Inputs ................................................................ - 32 - 
8.7  Audio Input Level Menu ................................................................................. - 37 - 
8.8  SCA/RDS Input Level Menu ............................................................................. - 38 - 
8.9  Set The Preemphasis ....................................................................................... - 39 - 
8.10  Set The Pilot Level And Enable/Disable The Pilot .......................................... - 40 - 
8.11  Set The Mono/Stereo Mode........................................................................ - 42 - 
8.12  Setup ......................................................................................................... - 43 - 
8.13  Diagnostics ................................................................................................ - 46 - 
8.14  Ethernet Setup ........................................................................................... - 49 - 
8.15  Metering.................................................................................................... - 54 - 
8.16  Turn On ..................................................................................................... - 57 - 
8.17  Standard I.P Control And Optional RGUI System - Password Set .................. - 58 - 
8.18  Set the Clock.............................................................................................. - 62 - 
8.19  HD Operation With FXI 60/250 Exciter........................................................ - 65 -

9  I.P. Control ...................................................................................................... - 68 - 

9.1  Standard I.P. Interface .................................................................................... - 68 - 
9.2  Maximum Number And Type Of RGUI/Web Users ........................................... - 68 - 
9.3  Optional STXLP RGUI I.P. Control .................................................................... - 73 -

10  Maintenance ................................................................................................... - 74 - 

10.1  Diagnostics ................................................................................................ - 74 - 
10.2  Software Update – Controller/Exciter .......................................................... - 76 - 
10.3  Emergency Control – Backup Controller ...................................................... - 77 - 
10.4  Front Panel and Circuit Board Indicators ..................................................... - 78 - 
10.5  Power Output with PA Failures ................................................................... - 80 - 
10.6  Troubleshooting Information ..................................................................... - 81 - 
10.7  Replace the Exciter ..................................................................................... - 89 - 
10.8  Replace the Optional Stereo Generator ....................................................... - 90 - 
10.9  Replace the Controller ................................................................................ - 90 - 
10.10  Replace the Fan ......................................................................................... - 92 - 
10.11  Replace the PA Module Assembly ............................................................... - 93 - 
10.12  Replace the PA Power Supply Module ........................................................ - 95 - 

©2013 Broadcast Electronics

 ix

10.13  Replace the Front Panel Display Board ........................................................ - 98 - 

10.14  Replace the Low-Pass Filter Assembly ......................................................... - 98 - 
10.15  Replace a Final Transistor on the PA Module............................................... - 99 - 
10.16  Replace the add-on PA Unit Controller ..................................................... - 101 - 
10.17  Replace the Combiner Fan ........................................................................ - 102 - 
10.18  Replace the Combiner Fan or Low Voltage Power Supply .......................... - 103 -

11  BE Part Numbers ........................................................................................... - 104 -

12  RF Technical Services Contact Information ................................................... - 170 -

13  Drawings ....................................................................................................... - 170 - 

©2013 Broadcast Electronics ix

x

This page intentionally left blank

©2013 Broadcast Electronics

 -1-

1 Overview
The STXLP FM transmitter series is designed to provide a low power cost effective solution for the
FM broadcast market (refer to Figure 1-1). The STXLP is available in 4 models providing power
levels from 250 W to 5 kW.
The STXLP can be equipped with several options. An optional stereo generator circuit board allows
the unit to generate a stereo signal from an AES or Analog L/R audio source. An optional RGUI
(Remote Graphical User Interface) system allows control, monitoring, fault analysis, and event
logging using an I.P. based tool. The following text presents the steps required for installation:
 Install the transmitter in a rack.
 If the internal exciter is to be used, connect a composite source to the unit. If the unit
is equipped with the optional stereo generator board, AES or analog L/R may be
connected to the unit. If an external exciter is to be used, an external relay and
attenuator will be required for the connection.
 Connect any SCA or RDS equipment if used.
 Connect a network patch cable if I.P. control is desired.
 Connect the failsafe.
 Connect the antenna.
 Connect the AC input.
 Set the transmitter output power.
 Select the audio input.
 Calibrate the audio input level
 Calibrate the SCA1/SC2/RDS levels.
 Select internal or external exciter.
 Turn the unit on.
The STXLP has been tested at the factory. The following text presents the preset factory defaults.
These include settings if the unit is equipped with the optional stereo generator circuit board.
 Frequency – Customer requested Frequency
 Power Level – 1 kW Model - 1000 W, 2 kW Model - 2000 W,
3 kW Model - 3000 W, 5 kW Model - 5000 W
 100% Modulation – Customer requested Deviation (75 kHz, 125 kHz, 200 kHz)
 Preemphasis – 75 uS
 Pilot Level – 10%
 Mono/Stereo Mode - Stereo
 Internal/External Exciter – Internal
 Audio Input – Composite
 Modulation Level – 100%
 Emergency Pwr – 1 kW Model - 250 W, 2 kW Model - 500 W,
3 kW Model - 750W, 5 kW Model – 1250 W
 SCA1 Injection = 10%
 SCA2 Injection = 10%
 RDS Injection = 10%
 Ethernet –
 I.P. – 10.2.4.110
 Subnet Mask – 255.255.0.0
 Gateway – 10.2.4.1

©2013 Broadcast Electronics -1-

 -2-

 Passwords -
 Optional RGUI Password - 222222
 Chief – 123456
 Operator - 111111

STXLP – 1kW

STXLP – 2 kW STXLP – 3 kW STXLP – 5 kW

Figure 1-1: STXLP – TRANSMITTER MODELS

©2013 Broadcast Electronics

 -3-

The following text presents STXLP optional equipment.

Table 1-1: Optional Equipment

Optional Equipment
PART NUM DESCRIPTION QTY
909-4020 Stereo Generator Circuit Board 1
909-4600 STXLP Remote Graphical User Interface (RGUI) 1
979-4603 Kit, External Exciter, For STX With FXI-60/FXI-250 1
979-4603-001 Kit, External Exciter, For STX With FX-50/FM-100C/FM-250C 1
909-4501-X00 STXLP-5kW AC Power Distribution Panel 1
909-4301-X00 STXLP-3kW AC Power Distribution Panel 1
909-4201-X00 STXLP-2kW AC Power Distribution Panel 1
979-4302-325 Upgrade Kit, STX-3kW to STX-5kW. 1
979-4202-225 Upgrade Kit, STX-2kW to STX-5kW. 1
979-4202-223 Upgrade Kit, STX-2kW to STX-3kW. 1
979-4102-125 Upgrade Kit, STX-1kW to STX-5kW. 1
979-4102-123 Upgrade Kit, STX-1kW to STX-3kW. 1
979-4102-122 Upgrade Kit, STX-1kW to STX-2kW. 1
471-4219 Optional Support Brackets 1

The following text presents the STXLP specifications.

Table 1-2: Specifications

Parameter Specification
Physical
1 kW Model -
Height 3RU (5.25”,13.4 cm)
Width 19” (48.3 cm) EIA Rack Mountable.
Depth 26” (66.1 cm) deep including connectors.
Weight 44 lbs (19.9 kg) unpacked.
Outlet Size 75 in2 (493 cm2), rear of unit
2 kW Model -
Height 17.5”,(44.5 cm)
Width 19” (48.3 cm) EIA Rack Mountable.
Depth 26” (66.1 cm) deep including connectors.
Weight 127 lbs (57.6 kg) unpacked.
Outlet Size 165 in2 (1065 cm2), rear of unit
3 kW Model -
Height 22.75”(57.8 cm)
Width 19” (48.3 cm) EIA Rack Mountable.
Depth 26” (66.1 cm) deep including connectors.
Weight 168 lbs (76.2 kg) unpacked.
Outlet Size 220 in2 (1419 cm2), rear of unit
5 kW Model -
Height 33.25”(84.5 cm)
Width 19” (48.3 cm) EIA Rack Mountable.
Depth 26” (66.1 cm) deep including connectors.
Weight 249 lbs (112.9 kg) unpacked.
Outlet Size 330 in2 (2129 cm2), rear of unit

©2013 Broadcast Electronics -3-

-4-

Environmental
Temperature -10°C to +50°C.
Altitude 10,000ft (3048M).
Humidity 95% max., non-condensing.
1 kW Model
Cooling Air Requirements 200 CFM (5.7 m3//Min)
Heat Dissipation 750 W at 1 kW RF Output into a 50 Ohm load, FM Only Mode.
BTU 2560 BTU/H at 1 kW RF Output into a 50 Ohm load.
2 kW Model
Cooling Air Requirements 600 CFM (17.0 m3//Min)
Heat Dissipation 1550 W at 2 kW RF Output into a 50 Ohm load, FM Only Mode.
BTU 5295 BTU/H at 2 kW RF Output into a 50 Ohm load.
3 kW Model
Cooling Air Requirements 800 CFM (22.7 m3//Min)
Heat Dissipation 2300 W at 3 kW RF Output into a 50 Ohm load, FM Only Mode.
BTU 7850 BTU/H at 3 kW RF Output into a 50 Ohm load.
5 kW Model
Cooling Air Requirements 1200 CFM (34.0 m3//Min)
Heat Dissipation 3800 W at 5 kW RF Output into a 50 Ohm load, FM Only Mode.
BTU 13000 BTU/H at 5 kW RF Output into a 50 Ohm load.
AC Input
Frequency 47-63 Hz.
Power Factor ≥0.98 .
Surge Protection Surge protection required.
1 kW Model
Voltage 180 to 260 VAC, Single Phase.
Power Requires 20 Amps Max.
Power Consumption 1.75 kW (calculated) at 1 kW.
Current Draw 16 Amps Max.
2 kW Model
Power Consumption 3.5 kW (calculated) at 2 kW.
Single Phase -
Voltage 180 to 260 VAC
Power Disconnect Size 40 Amps.
Current Draw 32 Amps Max.
3 kW Model
Power Consumption 5.3 kW (calculated) at 3 kW.
Single Phase -
Voltage 180 to 260 VAC
Power Disconnect Size 60 Amps.
Current Draw 48 Amps Max.
Three Phase -
Voltage 180 to 260VAC Delta or 311 to 449VAC Wye
Power Disconnect Size 30 Amps
Current Draw 28 Amps Max.

©2013 Broadcast Electronics

 -5-

5 kW Model
Power Consumption 8.8 kW (calculated) at 5 kW.
Single Phase -
Voltage 180 to 260 VAC
Power Disconnect Size 100 Amps.
Current Draw 80 Amps Max.
Three Phase -
Voltage 180 to 260VAC Delta or 311 to 449VAC Wye
Power Disconnect Size 60 Amps.
Current Draw 47 Amps Max.
RF Output
Accuracy +/-5%.
Impedance 50 Ohms nominal.
VSWR Rated Power into 1.5:1 VSWR.
1 kW Model
FM Only 250-1100W.
FM+HD (-20 dB)* 175-770W.
FM+HD (-10 dB)* 110-495W.
HD Only* 75-330W.
Resolution 1W.
Efficiency 64% Typical.
RF Output Connector Type N, Female.
2 kW Model
FM Only 500-2000W.
FM+HD (-20 dB)* 350-1280W.
FM+HD (-10 dB)* 220-820W.
HD Only* 150-600W.
Resolution 2W.
Efficiency 64% Typical.
RF Output Connector 1 5/8“ Hard Line Coax, 50 Ohm.
3 kW Model
FM Only 750-3000W.
FM+HD (-20 dB)* 525-1920W.
FM+HD (-10 dB)* 330-1230W.
HD Only* 225-900W.
Resolution 3W.
Efficiency 62% Typical.
RF Output Connector 1 5/8“ Hard Line Coax, 50 Ohm.
5 kW Model
FM Only 1250-5000W.
FM+HD (-20 dB)* 875-3200W.
FM+HD (-10 dB)* 550-2050W.
HD Only* 375-1500W.
Resolution 5W.
Efficiency 62% Typical.
RF Output Connector 1 5/8“ Hard Line Coax, 50 Ohm.
Frequency
Range 87.5MHz to 108MHz; 10kHz increments.
Stability Internal Osc: +/-150 Hz, -10°C to +50°C.
Modulation
Type Direct-to-Channel; FM (HD or FM + HD only with external exciter.
Capability 300 kHz
RF Harmonics Suppression Meets all FCC/DOC requirements and CCIR recommendations.

©2013 Broadcast Electronics -5-

-6-

Composite Input
Connector BNC, un-balanced
Impedance 10k ohms
Level 3.5V p-p for 75 kHz modulation
Amplitude Response +/-0.03 dB 20Hz to 53 kHz; +/-0.25 dB 53 kHz to 100 kHz
SNR -80dB; below 100% modulation @ 400 Hz
THD + Noise 0.1%; 20 Hz to 53 kHz; 0.15% 53 kHz to 100 kHz
Stereo Separation 55dB; (typical 60 dB)
IMD 0.13%, SMPTE (60.7000 Hz, 1:1 ratio)
Asynchronous AM S/N Ratio Better than -65 dB (typical -70dB) below referenced to 100% peak
AM modulation.
Synchronous AM S/N Ratio Better than -53 dB (typical -60dB) below referenced to 100% peak
AM modulation. 75usec de-emphasis with 75 kHz deviation @ 400
Hz sine wave.
SCA1 & 2 Inputs
Connectors(2) BNC, un-balanced
Impedance 10k ohms
Level 3.5V p-p for 10% injection level.
Response +/-0.5dB; 53 kHz to 100 kHz.
RDS Input
Connector BNC, un-balanced.
Impedance 10k ohms.
Level 3.5V p-p for 10% injection level.
Response +/-0.5 dB; 53 kHz to 100 kHz.
Pilot Stability +-0.3 Hz, 0°C to +50°C.
AES Input **
Connector XLR Female.
Impedance 110 Ohms, balanced.
Level -2 dBFS for 100% modulation.
Amplitude Response +/-0.25 dB; 20 Hz to 15 kHz.
SNR 75 dB below 100% modulation @ 400 Hz
IMD 0.1% or better.
THD + Noise 0.1% or better.
Stereo Separation 55dB (typical 60dB); 20 Hz to 15 kHz
Pre-emphasis None, 50 uSec, 75 uSec selectable
Modes Mono L, Mono R, Mono L+R, Stereo
Analog L/R **
Connectors XLR Female
Impedance 600 Ohms or 10K Ohms, selectable, balanced.
Level +10 dBm for 100% modulation into 600 Ohms.
Amplitude Response +/-0.25dB; 20Hz to 15 kHz
SNR 75 dB below 100% modulation @ 400 Hz
IMD 0.1% or greater.
THD + Noise 0.1% or greater.
Stereo Separation 55 dB (typical 60 dB); 20 Hz to 1 5kHz
Pre-emphasis None, 50 usec, 75 usec selectable
Modes Mono L, Mono R, Mono L+R, Stereo

©2013 Broadcast Electronics

 -7-

19kHz Output **
Connector BNC un-balanced
Impedance 4.7 k Ohm minimum load
Level 1V p-p
Regulatory
FCC/DOC/CE/IEC 215 Safety Meets or exceeds FCC/DOC/CE and IEC 215 Safety requirements
* External HD Exciter Required
** Optional Stereo Generator Circuit Board Required

©2013 Broadcast Electronics -7-

-8-

2 Installation Preparation
2.1 Verify Contents of Shipment
2.2 1 kW Models -
909-4101, STXLP-1kW FM Transmitter
979-4110, STXLP-1kW Installation Kit
979-4111, STXLP Instruction Manual Kit

2.3 2 kW Models -
909-4201, STXLP-2kW FM Transmitter
979-4210, STXLP-2kW Installation Kit
979-4111, STXLP 1kW Instruction Manual Kit
2.4 3 kW Models -
909-4301, STXLP-3kW FM Transmitter
979-4310, STXLP-3kW Installation Kit
979-4111, STXLP 1kW Instruction Manual Kit

2.5 5 kW Models -
909-4501, STXLP-5kW FM Transmitter
979-4510, STXLP-5kW Installation Kit
979-4111, STXLP Instruction Manual Kit

2.6 Tools / Items Needed For Installation (not supplied)

Small Flat Blade Screwdriver
Regular Flat Blade Screwdriver
Wire Strippers
Solder and Soldering Iron
Cable for 37 Pin Connector
Heat Shrink
Appropriate Tool for Rack Hardware
Standard Ethernet Cable to connect from the transmitter to the network.
2.7 Mounting Considerations
The STXLP-1kW unit is designed to mount in a standard 19” E.I.A. rack or cabinet
and is 3 rack units in height. The STXLP – 2kW unit consists of: 1) one STXLP –
1kW transmitter assembly which is 3 rack units in height, 2) one amplifier
assembly which is 3 rack units in height, and 3) a combiner assembly which is 4
rack units in height. The STXLP – 3kW unit consists of: 1) one STXLP – 1kW
transmitter assembly which is 3 rack units in height, 2) 2 amplifier assemblies
which are each 3 rack units in height, and 3) a combiner assembly which is 4 rack
units in height. The STXLP – 5kW unit consists of: 1) one STXLP – 1kW
transmitter assembly which is 3 rack units in height, 2) 4 amplifier assemblies
which are each 3 rack units in height, and 3) a combiner assembly which is 4 rack
units in height.

2.8 Estimated Time for Installation / Setup

Providing that you have the proper materials and tools listed above, the
installation and setup of the STXLP transmitter will take approximately 1 hour.

©2013 Broadcast Electronics

 -9-

3 STXLP-1kW Rear Panel

For STXLP 1kW models, the STXLP 1kW assembly is used as a standalone transmitter. In
STXLP 2kW, 3kW, and STXLP 5kW models, the STXLP 1kW assembly is used as the main
control and audio interface center. The following text presents the STXLP 1kW assembly
rear panel connections and features. 10
8
6
4
2 11
1 3 9
5 7

16

18 17
15 14 13
19 12
Figure 3-1: STXLP – 1kW Rear Panel Connections / Features

©2013 Broadcast Electronics -9-

- 10 -

1) GPIO – General purpose input/output connector. This connector is used to interface remote
control units to the transmitter. The following text presents the pin descriptions.

Table 3-1: GPIO Inputs

Pin Name Description
No.
1 Fault Reset Resets all the transmitter faults when active. Requires a
momentary low (0 V) to activate.
2 Failsafe Transmitter failsafe input. Requires a sustained low to close.
3 Transmitter On Turns the transmitter on when active. Requires a momentary low
(0 V) to activate.
4 Transmitter Off Turns the transmitter off when active. Requires a momentary low
(0 V) to activate.
5 Mute Transmitter is muted while the input is low (0 V).
6 Lower Transmitter Lowers the transmitter power while input is low (0 V).
Power
7 Raise Transmitter Raises the transmitter power while the input is low (0 V).
Power
8 Internal/External Toggles between internal and external exciter when active.
Exciter Control Requires a momentary low (0 V) to activate.
9 Controller Reset Resets the controller when active. Requires a momentary low (0
V) to activate.
10 External Exciter Fault This input requires the connection of external exciter fault output.
Input On the external exciter, select a status output which will be active
when any exciter fault occurs. Requires a sustained low (0 V) to
activate.
11 FM Only Mode Input FM Only mode is selected while the input is low (0 V). Active only
Select if in external exciter mode.
12 Ground Ground to be used for remote input connections.
13 FM+HD Mode Input FM + HD mode is selected while the input is low (0 V). Active
Select only if in external exciter mode.
14 HD Only Mode Input HD Only mode is selected while the input is low (0 V). Active only
Select if in external exciter mode.
18 PA Module Meter For STXLP 2 kW, 3 kW, and 5 kW models, toggles between the PA
Select Input modules for status readings. Requires a momentary low (0 V) to
activate. Not required for 1 kW models.
19 Ground Ground to be used for remote input connections.

©2013 Broadcast Electronics

 - 11 -

Table 3-2 GPIO Outputs

Pin Name Description
No.
15 Reflected Power This output is a dc voltage (0 to 5 V) for remote reflected power
monitoring of the system. 5V = 100 W – 1kW Models, 200 W –
2kW Models, 300 W – 3kW Models, 500 W – 5kW Models.
16 PA1 Thru PA5 Total For 1 kW models, outputs a dc voltage (0 to 5 V) for remote PA1
Current total current monitoring. For STXLP 2 kW, 3 kW, and 5 kW
models, outputs a dc voltage (0 to 5V) for a specific PA total
current as determined by the PA Module Meter Select Input.
17 PA1 Thru PA5 For 1 kW models, outputs a dc voltage (0 to 5 V) for remote PA1
Temperature temperature monitoring. For STXLP 2kW, 3 kW, and 5 kW
models, outputs a dc voltage (0 to 5V) for a specific PA
temperature as determined by the PA Module Meter Select Input.
20 General Fault Status General fault status. This output goes low (0 V) when any
transmitter fault occurs.
21 VSWR Status VSWR fault status. This output goes low (0 V) when VSWR of
greater than 1.5:1 is detected.
22 Transmitter On Status Transmitter on status. This output goes low (0 V) when the
transmitter is on.
23 Transmitter Off Status Transmitter off status. This output goes low (0 V) when the
transmitter is off.
24 Mute Status Mute status. This output goes low (0 V) when the transmitter is
muted.
25 AFC Lock Status AFC Lock status. This output goes low (0 V) when the internal
exciter is locked to the assigned frequency.
26 Power Supply Fault Power Supply fault status. This output goes low (0 V) when a
Status power supply fault is detected.
27 Internal/External Internal/External exciter status. This output goes high (+5V)
Exciter Status when the internal exciter is selected. This output goes low (0 V)
when the external exciter is selected.
28 PA Fault PA Fault status. This output goes low (0 V) when any PA fault is
detected.
29 PA1 Thru PA5 Forward For 1 kW models, outputs a dc voltage (0 to 5 V) for remote PA1
Power forward power monitoring. For STXLP 2 kW, 3 kW, and 5 kW
models, outputs a dc voltage (0 to 5V) for a specific PA forward
power as determined by the PA Module Meter Select Input.
30 PA1 Thru PA5 For 1 kW models, outputs a dc voltage (0 to 5 V) for remote PA1
Reflected Power reflected power monitoring. For STXLP 2 kW, 3 kW, and 5 kW
models, outputs a dc voltage (0 to 5V) for a specific PA reflected
power as determined by the PA Module Meter Select Input.
31 Not Used
32 +5V Out +5V used for remote status connections.
33 Forward Power This output is a dc voltage (0 to 5 V) for remote forward power
monitoring. 5V = 1100 W – 1kW Models, 2000 W – 2kW
Models, 3000 W – 3kW Models, 5000 W – 5kW Models.
34 PA Voltage This output is a dc voltage (0 to 5 V) for remote PA voltage
monitoring. 5V = 50 V PA Power Supply.
35 HD Power Control This output is used only when the transmitter is configured in an
HD system. When used in an HD system, the output is a dc
voltage (0 to 5 V) used to control power.

©2013 Broadcast Electronics - 11 -

- 12 -

Pin Name Description

No.
36 External Exciter Relay This output goes low (0 V) when the external exciter is selected.
Control
37 Ground Ground to be used for remote output connections.
2) PA2/PA3/PA4/PA5 – For STXLP 2kW, 3 kW, and 5 kW models, the PA2 through PA5 ports
are used to send control data to and receive data from an individual PA module. Not used
for STXLP 1 kW models.
3) SPLIT/COMB – For STXLP 2kW, 3 kW, and 5 kW models, the SPLIT/COMB port is used to
send control data to and receive data from the splitter/combiner. Not used for STXLP 1 kW
models.
4) ETHERNET – The ETHERNET port is used to interface the transmitter with a local network
or the Internet.

NOTE: TO ENSURE OPERATIONAL INTEGRITY OF THE STX LP TRANSMITTER WHILE

USING IP CONTROL, IT IS STRONGLY RECOMMENDED THAT THE UNIT BE
INSTALLED ON A PRIVATE NETWORK, BEHIND A FIREWALL, WITH SECURED
VIRTUAL PRIVATE NETWORK (VPN) ACCESS.

5) AES – The AES XLR connector is used to interface AES audio to the transmitter. Not used
if the transmitter is not equipped with the optional stereo generator circuit board.
6) LEFT – The LEFT XLR connector is used to interface analog left channel audio to the
transmitter. Not used if the transmitter is not equipped with the optional stereo generator
circuit board.
7) RIGHT – The RIGHT XLR connector is used to interface analog right channel audio to the
transmitter. Not used if the transmitter is not equipped with the optional stereo generator
circuit board.
8) COMP – The COMP BNC connector is used to interface a composite signal such as from a
composite link to the transmitter.
9) SCA2 – The SCA2 BNC connector is used to interface a subcarrier generator signal to the
transmitter SCA2 input.
10) 19 kHz OUT – The 19 kHz OUT BNC connector is used to output the pilot signal for
external equipment requiring a pilot signal for synchronization. Not used if the
transmitter is not equipped with the optional stereo generator circuit board.
11) RF SAMPLE – For STXLP – 1kW models, the RF SAMPLE BNC connector is an RF sample
which can be used for monitoring of the RF signal. Typical connections include a
modulation monitor or spectrum analyzer. The output level is 2V RMS at 1 kW. For
2kW, 3kW, and 5 kW models, the RF sample port is located on the combiner.
12) RF OUT – The RF OUT Type N female connector is the transmitter RF output.
13) PA RF IN – The PA RF IN BNC connector is used to interface: 1) the output of an external
exciter to the transmitter if used or 2) the internal exciter to the PA (output from the EXC
RF OUT connector).
14) EXC RF OUT – For STXLP 1 kW models, the EXC RF OUT BNC connector is used to
interface the exciter output to the PA. For STXLP 2 kW, 3 kW and 5 kW models, the EXC
RF OUT BNC connector is used to interface the exciter output to the splitter/combiner.
15) RDS – The RDS BNC connector is used to interface an RDS signal to the transmitter RDS
input.
16) SCA1 – The SCA1 BNC connector is used to interface a subcarrier generator signal to the
transmitter SCA1 input.
17) ON/OFF SWITCH – Transmitter AC ON/OFF switch.

©2013 Broadcast Electronics

 - 13 -

18) GND – The GND terminal provides a connection for a chassis ground strap or wire.
19) AC INPUT TERMINAL BLOCK – The AC input block is used for the AC input connection.

©2013 Broadcast Electronics - 13 -

- 14 -

4 STXLP-1kW Assembly Front Panel Features

For STXLP 1kW models, the STXLP 1kW assembly is used as a standalone transmitter. In
STXLP 2kW, 3kW, and STXLP 5kW models, the STXLP 1kW assembly is used as the main
control and audio interface center. The following text presents the STXLP 1kW assembly
front panel connections and features.

1 2 3 4 5 6

14 13 12 11 10 9 8 7

Figure 4-1: STXLP Front Panel Features

1) AUDIO INDICATOR – The audio indicator illuminates red if no modulation is detected

in the selected audio input source. The indicator illuminates green during normal
operation.
2) EXCITER INDICATOR – The exciter indicator illuminates red if the internal exciter: 1)
AFC (Automatic Frequency Control) becomes unlocked or 2) a communication fault
occurs. The indicator illuminates green during normal operation.
3) PA INDICATOR – For 1 kW models, the PA indicator illuminates red if a fault is detected
in the PA module. For 2 kW, 3 kW, and 5 kW models, the PA indicator illuminates red if
a fault is detected in any PA module. The indicator illuminates green during normal
operation.
4) VSWR INDICATOR – The VSWR indicator illuminates red when a greater than 1.5:1
VSWR condition is detected. The indicator illuminates green during normal operation.
5) LCD CONTRAST CONTROL – The LCD contrast control is used to adjust the backlight
on the LCD display.
6) TRANSMITTER CONTROL CENTER – The LCD display is used to present transmitter
information to the user.

©2013 Broadcast Electronics

 - 15 -

7) RETURN BUTTON – The return button is used to select a menu for editing, saves
data changes made by the user, and returns the user to selected top level menu. 
8) DOWN ARROW BUTTON – The down button allows the user to move down the
menu tree, decreases the selected value, or changes an option state. 
9) UP ARROW BUTTON – The up arrow button allows the user to move up the menu
tree, increases the selected value, or changes an option state.
10) RIGHT ARROW BUTTON – The right arrow button allows the user to move the
cursor to the right on the LCD display. In menus with no cursor, goes back to the sub
menu such as Metering (refer to the STXLP Menu Tree at the end of this manual for
specific menus). 
11) LEFT ARROW BUTTON – The left arrow button allows the user to move the
cursor to the left on the LCD display. In menus with no cursor, goes back to the main
menu (refer to the STXLP Menu Tree at the end of this manual for specific menus). 
12) PS INDICATOR – For 1 kW models, the PS indicator illuminates red if a fault is
detected in the PA power supply module. For 2 kW, 3 kW, and 5 kW models, the PS
indicator illuminates red if a fault is detected in any PA power supply module. The
indicator illuminates green during normal operation.
13) CNTL INDICATOR – The CNTL indicator flashes red to indicate when the unit has
switched to the backup controller due to a fault in the main controller.
14) FAILSAFE INDICATOR – The FAILSAFE indicator illuminates red when the failsafe is
opened. The indicator illuminates green when the failsafe is closed.

©2013 Broadcast Electronics - 15 -

- 16 -

5 STXLP-2kW, STXLP-3kW, And STXLP-5kW PA

Assembly Front Panel Features

1 2 3

Figure 5-1: STXLP PA Assembly Front Panel Features

1) DRV INDICATOR – The drive indicator illuminates red if no RF is present at the input.
The indicator illuminates green during normal operation. The indicator is red when the
transmitter RF is off.
2) PA INDICATOR –The PA indicator illuminates red if a fault is detected in the PA module.
The indicator illuminates green during normal operation.
3) VSWR INDICATOR – The VSWR indicator illuminates red when a greater than 1.5:1
VSWR condition is detected. The indicator illuminates green during normal operation.
4) PS INDICATOR –The PS indicator illuminates red if a fault is detected in the PA power
supply module. The indicator illuminates green during normal operation.

©2013 Broadcast Electronics

 - 17 -

6 STXLP-2kW, STXLP-3kW, And STXLP-5kW

Combiner Assembly Front Panel Features
1 2 3

Figure 6-1: STXLP Combiner Assembly Front Panel Features

1) SPLITTER RF IN INDICATOR – The splitter RF in indicator illuminates red if the RF input

level is too low or high. The indicator illuminates green during normal operation. The
indicator is red when the transmitter RF is off.
2) COMBINER TEMP INDICATOR –The combiner temp indicator illuminates red if the
combiner temperature is above 91 degrees C. The indicator illuminates green during
normal operation.
3) VSWR INDICATOR – The VSWR indicator illuminates red when a greater than 1.5:1
VSWR condition is detected. The indicator illuminates green during normal operation.
4) PS INDICATOR –The PS indicator illuminates red if a fault is detected in the combiner
+12V power supply module. The indicator illuminates green during normal operation.

©2013 Broadcast Electronics - 17 -

- 18 -

7 Installation
7.1 Install Into Equipment Rack
CAUTION: EACH UNIT MUST HAVE REAR MOUNTING SUPPORT TO PREVENT
DAMAGE.

7.2 1 kW Models -
The STXLP – 1kW assembly requires 3 rack units of space in a standard 19 inch
E.I.A. rack. Overall installation information is presented in the installation drawing
at the end of this guide. To install the unit proceed as follows:
1. Determine the location for the unit in the rack.
2. Refer to Figure 7-1 and install the unit in the rack using the mounting
hardware located in the installation kit.
3. Refer to Figure 7-1 and install the rear mounting plates as shown. If the
rack is not equipped with rear rails, modify the rack to provide rear
support.

7.3 2 kW Models -
The STXLP – 2kW unit consists of: 1) one STXLP – 1kW transmitter assembly which
is 3 rack units in height, 2) one amplifier assembly which is 3 rack units in height,
and 3) a combiner assembly which is 4 rack units in height. Overall installation
information is presented in the installation drawing at the end of this guide. To
install the unit proceed as follows:
1. Determine the location for the unit in the rack.
2. Refer to Figure 7-1 and install the unit in the rack using the mounting
hardware located in the installation kit.
3. Refer to Figure 7-1 and install the rear mounting plates as shown. If the
rack is not equipped with rear rails, modify the rack to provide rear
support.

7.4 3 kW Models -
The STXLP – 3kW unit consists of: 1) one STXLP – 1kW transmitter assembly which
is 3 rack units in height, 2) 2 amplifier assemblies which are each 3 rack units in
height, and 3) a combiner assembly which is 4 rack units in height. Overall
installation information is presented in the installation drawing at the end of this
guide. To install the unit proceed as follows:
1. Determine the location for the unit in the rack.
2. Refer to Figure 7-1 and install the unit in the rack using the mounting
hardware located in the installation kit.
3. Refer to Figure 7-1 and install the rear mounting plates as shown. If the
rack is not equipped with rear rails, modify the rack to provide rear
support.

7.5 5 kW Models -
The STXLP – 5kW unit consists of: 1) one STXLP – 1kW transmitter assembly which
is 3 rack units in height, 2) 4 amplifier assemblies which are each 3 rack units in
height, and 3) a combiner assembly which is 4 rack units in height. Overall
installation information is presented in the installation drawing at the end of this
guide. To install the unit proceed as follows:
1. Determine the location for the unit in the rack.

©2013 Broadcast Electronics

 - 19 -

2. Refer to Figure 7-1 and install the unit in the rack using the mounting
hardware located in the installation kit.
3. Refer to Figure 7-1 and install the rear mounting plates as shown. If the
rack is not equipped with rear rails, modify the rack to provide rear
support.

Figure 7-1: RACK INSTALLATION

7.6 RFI/EMI Protection - Ferrite Ring Installation

CAUTION: IT IS STRONGLY RECOMMENDED ALL TRANSMITTER INPUT/OUTPUT
CABLES BE INSTALLED WITH FERRITE RINGS FOR RFI/EMI
PROTECTION.
The following text presents the procedures to connect audio, Ethernet,
input/output, sample, and interconnect (for STXLP 2kW, 3kW, and STXLP-5kW
models) cables to the transmitter. It is strongly recommended the cables be
installed with Ferrite rings for RFI/EMI protection (refer to Figure 7-2). Ensure
Ferrite rings are used with the cable installations.

7.7 AES Connections – Requires Optional Stereo Generator PCB

If the transmitter is equipped with the optional stereo generator circuit board, an
AES source can be used for the audio input. Input level range is from -20 dbFS to
0 dbFS. -2 dbFS nominal. If AES audio is to be used –
1. Locate an XLR mating connector.
2. Attach the wires as follows –
 Pin 1 – Ground
 Pin 2 – Signal +
 Pin 3 – Signal –
3. Refer to Figure 5 and connect the cable to the AES connector.

7.8 ANALOG L/R Connections – Requires Optional Stereo

Generator PCB
If the transmitter is equipped with the optional stereo generator circuit board, an
analog L/R source can be used for the audio input. Input level range is from -15
dBm to +15 dBm. +10 dbm nominal. If analog L/R audio is to be used –
1. Locate 2 XLR mating connectors.
2. Attach the left channel wires as follows –
 Pin 1 – Ground
 Pin 2 – Signal +

©2013 Broadcast Electronics - 19 -

- 20 -

 Pin 3 – Signal –
3. Refer to Figure 5 and connect the cable to the LEFT connector.
4. Repeat the procedure for the right channel.

©2013 Broadcast Electronics

 - 21 -

Figure 7-2: STXLP Connections (Sheet 1 of 2)

©2013 Broadcast Electronics - 21 -
- 22 -

Figure 7-3: STXLP Connections (Sheet 2 of 2)

7.9 Composite Connections

If a composite audio source is to be used, refer to Figure 5 and connect a BNC
cable from the source to the COMP connector. Input level range is from -15 dBm
to +15 dBm. 3.5 Vpp nominal.

7.10 SCA1 Connections

If an SCA is to be used, refer to Figure 5 and connect a BNC cable from the source
to the SCA1 connector. Input level range is from -20 dBm to +15 dBm. 3.5 Vpp
nominal.

7.11 SCA2 Connections

If a second SCA is to be used, refer to Figure 5 and connect a BNC cable from the
source to the SCA2 connector. Input level range is from -20 dBm to +15 dBm.
3.5 Vpp nominal.

7.12 RDS Connections

If an RDS generator is to be used, refer to Figure 5 and connect a BNC cable from
the source to the RDS connector. Input level range is from -20 dBm to +15
dBm. 3.5 Vpp nominal.

7.13 19 kHz Out Connections

If the unit is equipped with the optional stereo generator board and a 19 kHz
pilot signal is required, refer to Figure 5 and connect a BNC cable from 19 kHz
OUT connector and the source equipment. Output level is 1 Vpp.

7.14 Exciter - Using Only the Internal Exciter

If only the internal exciter is to be used, refer to Figure 5 and ensure the jumper
cable is connected between the EXC RF OUT and the PA RF IN connectors.

7.15 Exciter - Using Only the External Exciter

CAUTION: TO PREVENT DAMAGE TO THE PA, DO NOT OVERDRIVE THE INPUT.
If only an external exciter is to be used, refer to Figure 7-2 and perform the
following procedure. If the external exciter is an FXI-60 /FXI-250, refer to the FXI-
60/FXI-250 connection diagram at the end of this manual for additional
connection information.

©2013 Broadcast Electronics

 - 23 -

1. Remove the cable between the EXC RF OUT and PA RF IN connectors.

2. If the exciter RF output power cannot be lowered to 100 mW or below,
connect an attenuator to the exciter RF output.
3. Connect the external exciter to the PA RF IN connector. The maximum PA RF
input level is 100 mW.

ATTENUATOR POWER RATIO

-3 dB .5
-6 dB .25
-10 dB .1
-20 dB .01

7.16 Exciter - Using Both the Internal and External Exciter

CAUTION: TO PREVENT DAMAGE TO THE PA, DO NOT OVERDRIVE THE INPUT.
If both the internal exciter and an external exciter are to be used, an external relay
must be used. Refer to Figure 7-2 and perform the following procedure. If the
external exciter is an FXI-60/FXI-250, refer to the FXI-60/FXI-250 connection
diagram at the end of this manual for additional connection information.
1. Remove the cable between the EXC RF OUT and PA RF IN connectors.
2. If the exciter RF output power cannot be lowered to 100 mW or below,
connect an attenuator to the exciter RF output.
3. Connect a BNC cable between the EXC RF OUT connector and one of the
relay terminals.
4. Connect a cable between the external exciter RF output connector (attenuator
if required) and the other relay terminal.
5. Connect a cable between the common relay terminal and the PA RF IN
connector.

7.17 Ethernet Connections

The STXLP transmitter is equipped with an Ethernet port. This port allows the
transmitter to be monitored and controlled by the built in web interface or by the
optional STXLP RGUI (Remote Graphical User Interface) remote control system.
The port requires a standard RJ45 patch cable. If Ethernet control of the
transmitter is desired, refer to Figure 7-2 and connect a standard RJ45 patch cable
between the ETHERNET connector and a computer or hub.

NOTE: TO ENSURE OPERATIONAL INTEGRITY OF THE STX LP TRANSMITTER WHILE

USING IP CONTROL, IT IS STRONGLY RECOMMENDED THAT THE UNIT BE
INSTALLED ON A PRIVATE NETWORK, BEHIND A FIREWALL, WITH SECURED
VIRTUAL PRIVATE NETWORK (VPN) ACCESS.

7.18 Remote Control Unit Connections

The GPIO connector provides the interface of control and status signals to a
remote control unit (refer to Figure 3-1). If remote control unit interfacing is
desired, refer to Figure 3-1 and proceed as follows:
1. Refer to Tables 1 and 2 to determine the desired remote control/status signals
to be connected.

©2013 Broadcast Electronics - 23 -

- 24 -

2. Solder the wires in the cable to the mating connector located in the
installation kit.
3. Connect the cable the GPIO connector.

7.19 Failsafe Connection

The failsafe input is located at GPIO pin 2. The input requires a ground (0 V) to
close the failsafe connection. Refer to Figure 7-2 and proceed as follows:
1. Locate a ground pin such as pin 12 or 19.
2. Route the ground through external equipment such as a remote control
system, external switch, or test load.
3. Connect the ground from the failsafe equipment to failsafe input GPIO pin 2.

7.20 RF Sample Connection

For STXLP – 1kW models, the BNC RF SAMPLE connector is for the connection of
equipment such as a modulation monitor. The level is 2V RMS at 1kW. Refer to
Figure 7-2 and connect the desired equipment. For 2 kW, 3 kW, and 5 kW
models, the RF sample port is located on the combiner (refer to the installation
diagram at the end of the manual). The level is 2V RMS at 2 kW for 2kW models,
3 kW for 3 kW models, and 5 kW for 5 kW models.

7.21 HD System Connections

The STXLP transmitter can be used with an external HD exciter to provide HD
broadcast operation. Figure 7-4 presents the HD system connections. Refer to
Figure 7-4 and connect the exciter to the transmitter as shown. If the HD exciter
is an FXI-60/FXI-250, refer to the FXI-60/FXI-250 connection diagram at the end
of this manual for additional connection information.

7.22 RF Out Connection

For STXLP - 1kW models, the TYPE N RF OUT connector is for the connection of
the antenna or dummy load. Refer to Figure 7-2 and connect the RF OUT
connector to the antenna or dummy load. For STXLP 2kW, 3kW, and 5kW
models, a 1 5/8 connector is for the connection of the antenna or dummy load.
Refer to the connection diagram at the end of this manual and connect the RF
OUT connector to the antenna or dummy load.

WARNING: USE THE RF CABLES SUPPLIED IN THE INSTALLATION KIT. IF THE

CABLES ARE NOT USED, THE COMBINER COMPONENTS WILL BE
DAMAGED.

7.23 RF/Control Connections – 2 kW Models

The STXLP – 2kW models require RF and control connections. Refer to the STX
2kW connection diagram at the end of this manual and connect the RF and
control cables as shown. Ensure the splitter and combiner cables in the
installation kit are used to connect the STXLP – 2kW components.

WARNING: USE THE RF CABLES SUPPLIED IN THE INSTALLATION KIT. IF THE

CABLES ARE NOT USED, THE COMBINER COMPONENTS WILL BE
DAMAGED.

©2013 Broadcast Electronics

 - 25 -

7.24 RF/Control Connections – 3 kW Models

The STXLP – 3kW models require RF and control connections. Refer to the STX
3kW connection diagram at the end of this manual and connect the RF and
control cables as shown. Ensure the splitter and combiner cables in the
installation kit are used to connect the STXLP – 3kW components.

WARNING: USE THE RF CABLES SUPPLIED IN THE INSTALLATION KIT. IF THE

DAMAGED.

7.25 RF/Control Connections – 5 kW Models

The STXLP – 5kW models require RF and control connections. Refer to the STX
5kW connection diagram at the end of this manual the RF and control cables as
shown. Ensure the splitter and combiner cables in the installation kit are used to
connect the STXLP – 5kW components.

7.26 Ground Connection

WARNING: ENSURE AN EARTH GROUND CONDUCTOR IS SECURLEY CONNECTED
TO THE CHASSIS GROUND TERMINAL.
Each STXLP transmitter model requires ground connections. For STXLP 1kW
models, refer to Figure 7-2 and connect an earth ground to the GND terminal.
For STXLP 3kW and 5kW models, each component chassis is equipped with a
ground terminal. Refer to the installation drawings at the end of this manual and
connect an earth ground to each component.

EXT EX FLT IN – PIN 10

FAULT OUT
HD MODE INPUT – PIN 14
HD MODE STATUS OUT
FM+HD MODE INPUT – PIN 13
FM+HD MODE STATUS OUT
FM MODE INPUT – PIN 11
FM ONLY MODE STATUS OUT
HD POWER CTRL - PIN 35
HD POWER CNTL IN RF OUT
HD EXCITER ATTENUATOR +V
EXT EX RELAY CTRL - PIN 36

Figure 7-4 HD SYSTEM CONNECTIONS

©2013 Broadcast Electronics - 25 -

- 26 -

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING

7.27 AC Input Connection

The STXLP 1kW and 2kW units will operate from a 180V to 260V AC 47 to 63 Hz
single phase power source. The STXLP 3kW and 5kW units will operate from a
180V to 260V AC 47 to 63 Hz single phase power source or 311V to 449V AC 47
to 63 three phase power source. To connect AC to the unit, and proceed as
follows:

7.28 1 kW Models -
1. Operate the ON/OFF switch to OFF.
2. Locate an AC cable of the appropriate current capacity for the AC input
to be used.
3. Remove the ac guard.
4. Refer to Figure 7-2 and connect the cable to the STXLP rear panel AC
input terminals.
5. Replace the ac guard.

7.29 2 kW Models –
1. Main AC input information is presented in the installation diagram at the
end of this manual.
2. On the combiner chassis, operate the ON/OFF switch to OFF.
3. Locate an AC cable of the appropriate current capacity for the AC input
to be used.
4. Remove the ac guard.
5. Refer to the installation diagram at the end of this manual and connect
the cable to the STXLP rear panel AC input terminals.
6. Connect the wiring to an ac breaker as shown.
7. Replace the ac guard.
8. Repeat the procedure for the 1 kW main control unit and the PA unit.

7.30 3 kW Models –
1. Main AC input information is presented in the installation diagram at the
end of this manual. If the unit is to be operated from a three phase
power source, acceptable three phase power information is presented in
the three phase power source diagram at the end of this manual. Refer
to these diagrams for main AC input information.
2. On the combiner chassis, operate the ON/OFF switch to OFF.
3. Locate an AC cable of the appropriate current capacity for the AC input
to be used.
4. Remove the ac guard.
5. Refer to the installation diagram at the end of this manual and connect
the cable to the STXLP rear panel AC input terminals.
6. Connect the wiring to an ac breaker as shown.
7. Replace the ac guard.
8. Repeat the procedure for the 1 kW main control unit and the 2 PA units.

7.31 5 kW Models –
1. Main AC input information is presented in the installation diagram at the
end of this manual. If the unit is to be operated from a three phase

©2013 Broadcast Electronics

 - 27 -

power source, acceptable three phase power information is presented in

the three phase power source diagram at the end of this manual. Refer
to these diagrams for main AC input information.
2. On the combiner chassis, operate the ON/OFF switch to OFF.
3. Locate an AC cable of the appropriate current capacity for the AC input
to be used.
4. Remove the ac guard.
5. Refer to the installation diagram at the end of this manual and connect
the cable to the STXLP rear panel AC input terminals.
6. Connect the wiring to an ac breaker as shown.
7. Replace the ac guard.
8. Repeat the procedure for the 1 kW main control unit and the 4 PA units.

©2013 Broadcast Electronics - 27 -

 - 28 -

8 Initial Turn On and Setup

8.1 Overview
The following section will present the procedures to initially turn on and setup the
transmitter. Information on the STXLP operating menus is presented in a menu
tree at the end of this manual.

8.2 Initial AC On
NOTE: FOR ALL MODELS, ENSURE ALL TRANSMITTER INDIVIDUAL UNIT CIRCUIT
BREAKERS AND ON/OFF SWITCHES ARE OPERATED TO ON.
1. For STX-1kW models, operate the circuit breaker to ON and operate the
ON/OFF switch to ON. For STX-2kW, STX-3kW, and STX-5kW models,
operate all individual unit circuit breakers to ON and operate all individual
unit ON/OFF switches to ON.
The front panel LCD will illuminate.

8.3 Set The Power Output

1. Depress the  Button to display the Power Set menu. Power is adjusted by:
1) selecting the desired power mode, 2) accessing the digit using the 
buttons, 3) using the   buttons to change the value. The power ranges
are shown below.

MODEL FM ONLY - WATTS FM+HD - WATTS HD ONLY - WATTS

STXLP -1kW 250 to 1100 175 to 770 75 to 330
STXLP -2kW 500 to 2000 350 to 1280 150 to 600
STXLP -3kW 750 to 3000 525 to 1920 225 to 900
STXLP -5kW 1250 to 5000 875 to 3200 375 to 1500

POWER SET LEVEL

ACTIVE REFLECTED POWER

ACTIVE FORWARD POWER

©2013 Broadcast Electronics

 - 29 -

2. Depress  .
The Power Set select menu will appear.

3. Select the mode of operation for the power setting using the  buttons.
The modes are FM ONLY PWR, HD ONLY PWR, and FM+HD PWR.
4. Depress  .
The Power menu will change to the power set mode.

ACTIVE FORWARD POWER WITH CURSOR HERE, 1 WATT

READING. INCREMENTS

©2013 Broadcast Electronics - 29 -

- 30 -

WITH CURSOR HERE, 1000

WATT INCREMENTS

WITH CURSOR HERE, 1 WATT

INCREMENTS

WITH CURSOR HERE, 10 WATT

WITH CURSOR HERE, 100 WATT INCREMENTS
INCREMENTS

5. With the cursor in the 1 Watt position, use   to change the power in 1
Watt increments. The number will not change if an upper/lower power limit
is reached.
6. Depress  .
The cursor moves to the 10 Watt position.
7. Use   to change the power in 10 Watt increments. The number will not
change if an upper/lower power limit is reached.
8. Depress  .
The cursor moves to the 100 Watt position.
9. Use   to change the power in 100 Watt increments. The number will not
change if an upper/lower power limit is reached.
10. Depress  .
The cursor moves to the 1000 Watt position. The number will not change if
an upper/lower power limit is reached.
11. Use   to change the power in 1000 Watt increments. The number will
not change if an upper/lower power limit is reached.
12. Depress  .
The Power setting will be saved.
13. If required, repeat the procedure for the HD ONLY and FM+HD modes of
operation.

8.4 Set The Frequency

1. Depress  to display the Frequency menu.
The Frequency menu will appear.

©2013 Broadcast Electronics

 - 31 -

TRANSMITTER FREQUENCY

2. Depress  .
The Frequency menu will change to the frequency set mode.

WITH CURSOR HERE, 10 kHz

INCREMENTS

WITH CURSOR HERE, 100 kHz

INCREMENTS
WITH CURSOR HERE, 1 MHz
INCREMENTS

3. With the cursor in the 10 kHz position, use   to set the 10 kHz position of
the frequency. The number will not change if an upper/lower frequency limit
is reached.
4. Depress  .
The cursor moves to the 100 kHz position.
5. With the cursor in the 100 kHz position, use   to set the 100 kHz position
of the frequency. The number will not change if an upper/lower frequency
limit is reached.
6. Depress  .
The cursor moves to the 1 MHz position.

©2013 Broadcast Electronics - 31 -

- 32 -

7. With the cursor in the 1 MHz position, use   to set the 1 MHz position of
the frequency. The number will not change if an upper/lower frequency limit
is reached.
8. Depress  .
The frequency will be saved.

8.5 Select The Audio Input.

1. Depress  to display the Audio Input menu.
The Audio menu will appear.

2. Depress  .
The Audio Input menu will change to the audio input select mode.

3. Use   to select the audio input. If the unit is not equipped with the
optional stereo generator board, the transmitter is equipped with only a
composite input. If the unit is equipped with the board, select between
COMPOSITE, AES, or ANALOG.
4. Depress  .
The audio input will be saved.

8.6 Calibrate the Audio/SCA/RDS Inputs

Once the input is selected, the inputs must be calibrated. The following
procedure presents the calibration of the external composite input. The AES input
calibration is identical to the external composite. The Analog input will require
one additional input level calibration. If the optional stereo board is not present,
some of the menus will present N/A (not applicable).

©2013 Broadcast Electronics

 - 33 -

The procedures turn off all inputs with the exception of the source to be
calibrated. Therefore, the unit must be removed from on-air operation. If
SCA/RDS signals are used, the user must reduce the main channel audio level
manually to prevent over modulation. The steps required to calibrate inputs are:
 Calibrate the main channel audio (example composite). If the analog
input is selected, an additional input level calibration is required.
 Perform the deviation calibration if required.
 Calibrate the SCA/RDS inputs.
1 - CALIBRATE THE AUDIO INPUT -
1. Apply the nominal signal to the selected input. Ensure no SCA/RDS signals
are applied.
2. Depress  to display the audio cal menu.
The audio calibration menu will appear.

3. Depress  .
A calibration menu will appear.
4. Use   to select ext composite cal.
ACTIVE AUDIO INPUT

CURENT CALIBRATED VALUE

5. Depress  .
The edit calibration menu will appear

©2013 Broadcast Electronics - 33 -

 - 34 -

WITH CURSOR HERE,

INCREMENTS VALUE BY 1.

DEVIATION IN kHz
POT VALUE

6. With the cursor in the 1’s position, use   to set the desired value. The
number will not change if an upper/lower level limit is reached. If SCA/RDS
and pilot signals are to be used, ensure the audio level is lower than 100% to
allow the total deviation to be 100% when the SCA/RDS/pilot signals are
added.
7. Depress  .
The calibration will be saved and the calibration menu will appear.

2 – DEVIATION CALIBRATION –
The deviation calibration is performed at the factory for the desired deviation.
The deviation must be re-calibrated if:
 The deviation changes to a value not calibrated at the factory.
 The frequency changes.
1. Connect an external modulation meter to the RF SAMPLE connector.
2. Set the deviation jumper to the correct position for the desired deviation.

3. Connect an external composite source to the unit at a level of 3.5V p-p. If an

external composite source is not available, use an AES or analog source.
4. Ensure the audio source to be used is selected as the input (refer to Select The
Audio Input above if required).
5. Depress  to display the audio cal menu.
The audio calibration menu will appear.

©2013 Broadcast Electronics

 - 35 -

6. Depress  .
A calibration menu will appear.
7. Use   to select the deviation cal menu.

8. Depress  .
The deviation edit menu will appear .

9. Use   to adjust the level for the selected deviation on the external meter.
10. Depress  .
The calibration will be saved.
3 - REPEAT FOR AES AND ANALOG L/R -
If the optional stereo generator board is installed, repeat the above procedure for
the AES input. If the analog input is to be calibrated, the analog input level must
be calibrated. To calibrate the input level, proceed as follows:
1. Apply the highest peak level audio to the analog input. Ensure no other
signals are applied.
2. Depress  to display the audio cal menu.
The audio calibration menu will appear.

©2013 Broadcast Electronics - 35 -

- 36 -

3. Depress  .
A calibration menu will appear.
4. Use   to select left/right input cal.

5. Depress  .
The edit left/right input calibration menu will appear.

POT LEVEL.

USE THE  BUTTONS TO

INCREASE OR DECREASE LEVEL,
TO MINIMIZE THE CALIBRATION
VALUE SHOWN .

6. Check the left/right input level indication. The indication will present: 1)
lower level or 2) raise level. Use   to increase/decrease the pot level to
minimize the calibration value shown. The value should be near 0.
7. Depress  .
The calibration will be saved.
8. Once the left/right input cal is finished, repeat the CALIBRATE THE AUDIO
INPUT procedure for the left/right input.

©2013 Broadcast Electronics

 - 37 -

4 - IF SCA/RDS SYSTEMS ARE USED -

1. If SCA systems are to be used, remove the audio input signal and apply the
SCA1 signal. Only the SCA1 signal must be present.
2. Depress   to display the audio calibration menu.
3. Depress  .
4. Depress  to display the SCA1 calibration menu.
The SCA1 calibration menu will appear.

5. Depress  .
The SCA1 edit calibration menu will appear.

WITH CURSOR HERE,

INCREMENTS VALUE BY 1.

POT VALUE DEVIATION IN kHz

6. With the cursor in the 1’s position, use   to set the desired value. The
number will not change if an upper/lower level limit is reached.
7. Depress  .
The calibration will be saved.
8. Remove the SCA1 signal. Repeat the procedure if SCA2 and RDS systems are
to be used. Use   to select the desired SCA/RDS input.

8.7 Audio Input Level Menu

Once each audio input level has been calibrated, the Audio Input level menu
allows each individual input to be adjusted. For units without the optional stereo
generator board, the only input is COMPOSITE. For units with the stereo
generator board, the input options are: 1) COMPOSITE, 2) AES, or 3) ANALOG
L/R.
The following procedure sets the COMPOSITE input. The input level directly
changes the modulation level. Therefore, the number entered is in percent of
modulation.

©2013 Broadcast Electronics - 37 -

 - 38 -

1. Depress  to display the Audio Input Level menu (audio source with a
bargraph).
The Audio input level menu will appear.

ACTIVE MODULATION VALUE

ACTIVE MODULATION
BARGRAPH METER

2. Depress  .
The Audio Input Level menu will change to the audio input level set mode.

ACTIVE MODULATION VALUE

3. Use   to set the desired input level. The number will not change if an
upper/lower level limit is reached.
4. Depress  .
The composite input level will be saved.
5. Repeat the procedure for the AES and ANALOG L/R inputs.
The Audio Input menu will change to the audio input select mode.

8.8 SCA/RDS Input Level Menu

Once each SCA/RDS input level has been calibrated, the SCA/RDS Level menu
allows the SCA1, SCA2, and RDS inputs to be adjusted. The input level is adjusted
using the   buttons to change the value.
1. Depress  to display the SCA/RDS LEVEL menu.
The SCA/RDS Level menu will appear.
The SCA/RDS Level menu will appear.

©2013 Broadcast Electronics

 - 39 -

2. Depress  .
The SCA/RDS Level select menu will appear.

3. Depress  .
The SCA1 level edit menu will appear.

ACTIVE MODULATION VALUE

4. Use   to set the input. The number will not change if an upper/lower
level limit is reached.
5. Depress  .
The SCA1 Level will be saved.
6. Repeat the procedure for the SCA2 and RDS inputs. Use the   buttons to
select the SCA2 or the RDS input.

8.9 Set The Preemphasis

If the optional stereo generator circuit board is installed, the Preemphasis must be
set.
1. Depress  to display the PreEmphasis menu.
The Preemphasis menu will appear.

©2013 Broadcast Electronics - 39 -

- 40 -

2. Depress  .
The Preemphasis menu will change to the Preemphasis select mode.

3. Use   to select the preemphasis. Select between NONE, 50 uS, or 75 uS.

4. Depress  .
The preemphasis will be saved.

8.10 Set The Pilot Level And Enable/Disable The Pilot

If the optional stereo generator circuit board is installed, the pilot level must be
set. The pilot will be on when the unit is in stereo mode and off when the unit is
in a mono mode. The pilot can also be enabled or disabled manually for testing
using pilot on/off. This manual pilot override will be active until the unit ac power
is cycled or the operator returns the pilot to normal operation. To disable the
pilot during normal stereo operation, enter 0 for the pilot level.
1. Depress  to display the Pilot menu.
The Pilot menu will appear.

2. Depress  .
3. Use   to select the level menu.

©2013 Broadcast Electronics

 - 41 -

4. Depress  .
The pilot edit level menu will appear.

5. Use   to set the input. To set the 10 % position, set level to 9 and select
 to increment. The number will not change if an upper/lower level limit is
reached.
6. Depress  .
The pilot level will be saved.
7. Use   to select the pilot on/off menu.

8. Depress  .
The pilot on/off select menu will appear.

©2013 Broadcast Electronics - 41 -

- 42 -

9. Use   to enable or disable the pilot.

10. Depress  .
The pilot selection will be saved.

8.11 Set The Mono/Stereo Mode

If the optional stereo generator circuit board is installed, the mono/stereo mode
must be set. The pilot will be on when the unit is in stereo mode and off when
the unit is in a mono mode. The pilot can also be enabled or disabled manually
for testing using pilot on/off. This manual pilot override will be active until the
unit ac power is cycled or the operator returns the pilot to normal operation. The
mono/stereo options are: 1) mono L, 2) mono R, 3) mono L+R, and stereo. To set
mode, proceed as follows:
1. Depress  to display the Mono/St Mode menu.
The Mono/St Mode menu will appear.

2. Depress  .
The Mono/St Mode menu will appear.

3. Use   to select the mode. Select between STEREO, MONO L, MONO R,

or MONO L+R.

©2013 Broadcast Electronics

 - 43 -

4. Depress  .
The Mono/St Mode will be saved.

8.12 Setup
The setup menu allows the user to: 1) select internal/external exciter, 2)
transmitter type, 3) backup power setting, and 4) remote enable/disable.
1. Depress  to display the Setup menu.
The Setup menu will appear.

2. Depress  .
The Setup menu will change to the transmitter type, int/ext exciter/emergency
power select mode.

3. Depress  .
The transmitter type menu will appear.

4. Use   to select the transmitter type. Select between 1 kW, 2 kW, 3 kW,
or 5 kW models.
5. Depress  .

©2013 Broadcast Electronics - 43 -

- 44 -

The transmitter type will be saved.

6. Use   to select Internal/External exciter.
The following menu will appear.

7. Depress  .
The following menu will appear.

8. Use   to select INTERNAL or EXTERNAL.

9. Depress  .
The internal/external exciter selection will be saved.
10. Use   to select Emergency Pwr
The following menu will appear.

11. Depress  .
The emergency power set menu will appear.

©2013 Broadcast Electronics

 - 45 -

WITH CURSOR HERE, 1000 WITH CURSOR HERE, 1 WATT

WATT INCREMENTS INCREMENTS

WITH CURSOR HERE, 100 WATT

INCREMENTS
WITH CURSOR HERE, 10 WATT
INCREMENTS

14. Depress .

CAUTION: FOR STXLP-5kW MODELS, IT IS RECOMMEND EMERGENCY POWER BE

SET AT A MAXIMUM OF 3330W TO PREVENT DAMAGE TO THE
COMBINER.
12. For STXLP-5kW models, it is recommended emergency power be set at a
maximum of 3330W. This will allow for a simultaneous controller and PA
failure. The level can be increased if all PAs are operating normally. STXLP-
1kW, 2kW, and 3kW models can be set using the entire emergency power
range. Use the following steps to set the emergency power.
13. With the cursor in the 1 Watt position, use   to change the power in 1
Watt increments. The number will not change if an upper/lower power limit
is reached.
14. Depress  .
The cursor moves to the 10 Watt position.
15. Use   to change the power in 10 Watt increments. The number will not
change if an upper/lower power limit is reached.
16. Depress  .
The cursor moves to the 100 Watt position.
17. Use   to change the power in 100 Watt increments. The number will not
change if an upper/lower power limit is reached.
18. Depress  .
The cursor moves to the 1000 Watt position. The number will not change if
an upper/lower power limit is reached.

©2013 Broadcast Electronics - 45 -

- 46 -

19. Use   to change the power in 1000 Watt increments. The number will
not change if an upper/lower power limit is reached.
20. Depress  .
The Emergency Power setting will be saved.
21. Use   to select RMT EN/DIS. When disabled, the remote inputs and the
I.P. inputs will be disabled. When enabled, the remote inputs and the I.P.
inputs will be enabled.
The following menu will appear.

22. Depress  .
The following menu will appear.

23. Use   to select ENABLE or DISABLE.

24. Depress  .
The enable/disable remote selection will be saved.

8.13 Diagnostics
The diagnostics/stats menu allows the user to view transmitter faults and reset a
fault. The menu also allows the user to check transmitter stats. To check
transmitter faults and stats, proceed as follows:
1. Depress  to display the Diagnostics menu.
The Diagnostics menu will appear.

©2013 Broadcast Electronics

 - 47 -

2. Depress  .
The Diagnostics select menu will appear.

3. The   buttons are used to select controller diagnostics.

4. Depress  .
The Transmitter Diagnostics menu will appear.

5. The transmitter diagnostics will present OK if no fault is present or FLT for

active faults. Use   to view the faults. The faults include –
 Failsafe
 PLL Fault
 VSWR Shutdown
 PA Fault
 Exciter Fault
 Active Exciter
 External Exciter Status
 External Exciter Mode
 Audio Mode
 Exciter Communication

©2013 Broadcast Electronics - 47 -

- 48 -

6. Depress  .
The Diagnostics menu will appear.
7. Use   to select PA diagnostics. For STXLP 2 kW, 3 kW, and 5 kW models,
additional PA modules will be available as selections.
The PA1 Diagnostics menu will appear.

8. Depress  .
9. The PA diagnostics will present OK if no fault is present or FLT for active
faults. Use   to view the faults. The faults include –
 VSWR Shutdown
 VSWR Foldback
 RF Input Fault
 Power Supply Fault
 Current Foldback
 Temperature Fault
 Temperature Foldback
10. Depress  .
11. For 2 kW, 3 kW, and 5 kW models the combiner faults can be viewed. The
COMBINER diagnostics will present OK if no fault is present or FLT for active
faults. Use   to view the faults. The faults include –
 RF Input Fault
 Input overdrive Fault
 Over Temperature Fault
 VSWR Fault
 Splitter Fault
12. The diagnostics menu allows a faults to be reset. To reset a fault, depress  .
The Diagnostics menu will appear.
13. Use   to select fault reset
The fault reset menu will appear.

©2013 Broadcast Electronics

 - 49 -

14. Depress  .
The Diagnostics reset yes/no menu will appear.

15. Use   to select versions/jumpers.

The transmitter versions/jumpers menu will appear.

16. The stats menu allows the user to view the transmitter stats. Use   to
view the following stats –
 100% Modulation Jumper
 Transmitter Serial Number
 Controller Board Serial Number
 Firmware Version

8.14 Ethernet Setup

The Ethernet menu allows the user to set the transmitter I.P., subnet mask, and
gateway.
1. Depress  to display the Ethernet/IP menu.
The Ethernet/IP menu will appear.

©2013 Broadcast Electronics - 49 -

- 50 -

2. Depress  .
The Ethernet/IP setup menu will appear.

3. Depress  .
The I.P. Address menu will appear.

4. Depress  .
The I.P. Address setup menu will appear.

SELECTS A NUMBER FROM 0 TO 255

IN INCREMENTS OF 1.

5. Use   to select a value from 0 to 255 for this field.

©2013 Broadcast Electronics

 - 51 -

6. Depress  .
The cursor moves to the next field to the left.

7. Use   to select a value from 0 to 255 for this field.

8. Depress  .
The cursor moves to the next field to the left.

9. Use   to select a value from 0 to 255 for this field.

10. Depress  .
The cursor moves to the next field to the left.

11. Use   to select a value from 1 to 233 for this field.

12. Depress  .
The I.P. address will be saved.
13. Depress  .
The Ethernet/IP menu will appear.

©2013 Broadcast Electronics - 51 -

- 52 -

14. Depress  .
15. Use   to select Subnet Address.
The Ethernet/IP Subnet Address menu will appear.

16. Depress  .
The Subnet Address setup menu will appear.

SELECTS A NUMBER FROM 0 TO 255

IN INCREMENTS OF 1.

17. Refer to the I.P. Address steps above and enter a subnet mask. The subnet
mask using the exact same procedure as the I.P. address with one exception.
The first field may be assigned a number from 0 to 255.
18. When finished, depress  .
The subnet mask will be saved.
19. Depress  .
The Ethernet/IP menu will appear.

©2013 Broadcast Electronics

 - 53 -

20. Depress  .
21. Use   to select Gateway.
The Ethernet/IP Gateway menu will appear.

22. Depress  .
The gateway setup menu will appear.

SELECTS A NUMBER FROM 0 TO 255

IN INCREMENTS OF 1.

23. Refer to the I.P. Address steps above and enter a gateway. The gateway is
entered using the exact same procedure as the I.P. address with one
exception. The first field may be assigned a number from 0 to 255.
24. When finished, depress  .
The gateway will be saved.
25. Depress  .
The Ethernet/IP menu will appear.
26. To view the MAC address, use   to select MAC Address.
The MAC address menu will appear.

©2013 Broadcast Electronics - 53 -

- 54 -

27. Depress  .
The MAC address will appear.

28. Depress  .
The Ethernet/IP menu will appear.

8.15 Metering
The metering/stat menu allows the user to view vital transmitter and PA
information such as voltages, currents, and frequencies.
1. Depress  to display the Metering menu.
The Metering menu will appear.

2. Depress  .
The Metering selection menu will appear.

©2013 Broadcast Electronics

 - 55 -

3. The menu allows the selection of either controller, combiner or PA data. Use
  to select CONTROLLER.
4. Depress  .
The controller status menu will appear.

5. Use   to view the following data:

 2.5V Exciter PLL supply
 3.3V PA power supply
 1.2V Exciter PLL supply
 5V power supply
 3.3V power supply
 1.2V power supply
 Exciter modulation deviation in kHz.
 5V fused
 LV
 PA1 bias voltage
6. Depress  .
The transmitter status menu will appear.
7. Depress  .
8. The metering selection menu will appear.
9. Use   to select PA1. For STXLP 2 kW, 3 kW, and 5 kW models, additional
PAs will be available.
The PA status menu will appear.

©2013 Broadcast Electronics - 55 -

- 56 -

10. Depress  .

11. Use   to view the following data:

 Forward power
 PA temperature
 PA 48V supply
 PA RF input
 Driver current
 IPA current
 Final current 1
 Final current 2
 Final current 3
 Final current 4
 Reflected power
12. Depress  .
13. For 2 kW, 3 kW, and 5 kW models, use   to select COMBINER.
The COMBINER status menu will appear.
14. Depress  .
15. Use   to view the following data:
 RF input
 Forward power
 Reflected power
 +11V supply
 +5V supply
 +3.3V supply
 Configuration
 Combiner temperature

©2013 Broadcast Electronics

 - 57 -

 Inlet temperature
 Fan voltage
16. Depress  .
The Metering/Stat menu will appear.

8.16 Turn On
To turn the transmitter on/off, proceed as follows:
NOTE: FOR ALL MODELS, ENSURE ALL TRANSMITTER INDIVIDUAL UNIT CIRCUIT
BREAKERS AND ON/OFF SWITCHES ARE OPERATED TO ON.
1. Use   to select the transmitter ON/OFF menu.
The ON/OFF menu will appear.

2. Depress  .
The transmitter on/off select menu will appear.

3. To turn the transmitter on, depress  .

The menu will display the following.

4. To turn the transmitter off, depress  .

©2013 Broadcast Electronics - 57 -

- 58 -

The menu will display the following.

8.17 Standard I.P Control And Optional RGUI System - Password

Set
The transmitter is equipped with a standard I.P control interface. The transmitter
can also be equipped with the optional RGUI system. Both the I.P control
interface and the optional RGUI system are protected by passwords. The
passwords include: 1) operator, 2) chief, and 3) RGUI. Both the I.P interface and
the optional RGUI system use the chief and operator passwords. Only the
optional RGUI system uses the RGUI password to gain view access to the
transmitter. The passwords must be 6 digits in length. To set the passwords,
proceed as follows:
1. Depress  to display the Password menu.
The Password menu will appear.

2. With the cursor in this position, use   to select CHIEF.

The CHIEF password menu will appear.

3. Depress  .
The Password edit menu will appear.

©2013 Broadcast Electronics

 - 59 -

WITH CURSOR HERE, SETS THE

LAST DIGIT OF THE PASSWORD

4. With the cursor in this position, use   to set the last digit of the
password.
5. Depress  .
The cursor moves to the left.

6. With the cursor in this position, use   to set this password digit.
7. Depress  .
The cursor moves to the left.

8. With the cursor in this position, use   to set this password digit.
9. Depress  .
The cursor moves to the left.

©2013 Broadcast Electronics - 59 -

- 60 -

10. With the cursor in this position, use   to set this password digit.
11. Depress  .
The cursor moves to the left.

12. With the cursor in this position, use   to set this password digit.
13. Depress  .
The cursor moves to the left.

14. Depress  .
The chief password will be saved.
15. Use   to select Operator.

©2013 Broadcast Electronics

 - 61 -

16. Depress  .
The Operator setup menu will appear.

17. Refer to the Chief steps above and enter an operator password The operator
password is set using the exact same procedure as the Chief.
18. Depress  .
The operator password will be saved.
19. Use   to select RGUI.
The RGUI menu will appear.

20. Depress  .
The RGUI setup menu will appear.

©2013 Broadcast Electronics - 61 -

- 62 -

21. Refer to the Chief steps above and enter an RGUI password. The RGUI
password is set using the exact same procedure as the chief.
22. Depress  .
The RGUI password will be saved.

8.18 Set the Clock

The clock menu allows the user to set the internal clock. The clock is used only
for a future feature. Do not use the clock at this time. The clock time and date
are adjusted by: 1) accessing the digit using the  buttons and 2) using the
  buttons to change the value.
1. Depress  to display the Set Clock menu.
The Set Clock menu will appear.

2. Depress .
The time selection menu will appear.

3. Depress   to select TIME.

4. Depress  .

©2013 Broadcast Electronics

 - 63 -

The set clock time menu will appear.

WITH CURSOR HERE, TOGGLES

BETWEEN AM/PM

5. With the cursor in this position, use   to toggle between AM or PM.

6. Depress  .
The cursor moves to the left.

SECONDS

7. With the cursor in this position, use   to set the seconds.

8. Depress  .
The cursor moves to the left.

MINUTES

9. With the cursor in this position, use   to set the minutes.

10. Depress  .
The cursor moves to the left.

©2013 Broadcast Electronics - 63 -

- 64 -

HOURS

11. With the cursor in this position, use   to set the hours.
12. Depress  .
The time will be saved.
13. Depress  .
The time select menu will appear.
14. Use   to select Date.
The set date menu will appear.

15. Depress  .
The set date menu will appear.

YEAR

16. With the cursor in this position, use   to set the year.
17. Depress  .
The cursor moves to the left.

©2013 Broadcast Electronics

 - 65 -

DAY

18. With the cursor in this position, use   to set the day.
19. Depress  .
The cursor moves to the left.

MONTH

20. With the cursor in this position, use   to set the month.
21. Depress  .
The date will be saved.

8.19 HD Operation With FXI 60/250 Exciter

The STX can operate with an FXI-60/250 exciter in an HD transmission system.
The FXI exciter can operate in the following modes: 1) FM Only, 2) FM+HD, and
3) HD Only. Operating in a specific mode and switching between modes must be
performed in a specific manner to prevent damage to the equipment. The system
is configured and calibrated at the factory specifically for the type of HD operation
requested in the order.
FXI Setup For The STX
On the FXI exciter, access the PA/POWER menu. Ensure FMi 31 to 402 is selected
for transmitter type.

FM Only Operation.
CAUTION: TO PREVENT DAMAGE TO THE TRANSMITTER, ENSURE THE
FXI EXCITER AND THE STX TRANSMITTER ARE CONFIGURED
FOR THE SAME MODE OF OPERATION (EXAMPLE – FM
ONLY).
1. Operate the transmitter to Off using the ON/OFF Menu.

©2013 Broadcast Electronics - 65 -

- 66 -

2. On the FXI exciter, access OPER MODE  IBOC MENU and select FM ONLY.
3. On the STX transmitter, set the exciter modes as follows:
A. Use   to access the SETUP menu.
B. Depress  .
C. Use   to access the Internal/External exciter menu.
D. Depress  .
E. Use   to select EXTERNAL.
F. Depress  .
G. Depress  again to re-enter the setup menu.
H. Use   to access the External Exciter Mode menu.

I. Depress  .
The External Exciter Mode Select menu will appear.

J. Use   to select FM MODE. Ensure the transmitter is configured for

the same mode of operation as the exciter.

©2013 Broadcast Electronics

 - 67 -

K. Depress  .
The mode will be saved.
L. Operate the transmitter to On using the ON/OFF Menu.
FM+HD Operation.
CAUTION: TO PREVENT DAMAGE TO THE TRANSMITTER, ENSURE THE
FXI EXCITER AND THE STX TRANSMITTER ARE CONFIGURED
FOR THE SAME MODE OF OPERATION (EXAMPLE – FM
ONLY).
Repeat the FM Only Operation procedure above for FM+HD operation. Select the
FM&IBOC mode for the FXI exciter and HYB MODE on the STX transmitter.
Ensure the transmitter is configured for the same mode of operation as the
exciter.

HD Only Operation.
CAUTION: TO PREVENT DAMAGE TO THE TRANSMITTER, ENSURE THE
FXI EXCITER AND THE STX TRANSMITTER ARE CONFIGURED
FOR THE SAME MODE OF OPERATION (EXAMPLE – FM
ONLY).
Repeat the FM Only Operation procedure above for HD Only operation. Select the
IBOC ONLY mode for the FXI exciter and HD MODE on the STX transmitter.
Ensure the transmitter is configured for the same mode of operation as the
exciter.

©2013 Broadcast Electronics - 67 -

- 68 -

9 I.P. Control
NOTE: TO ENSURE OPERATIONAL INTEGRITY OF THE STX LP TRANSMITTER WHILE
USING IP CONTROL, IT IS STRONGLY RECOMMENDED THAT THE UNIT BE
INSTALLED ON A PRIVATE NETWORK, BEHIND A FIREWALL, WITH SECURED
VIRTUAL PRIVATE NETWORK (VPN) ACCESS.
The STXLP transmitter is equipped with a standard I.P. control interface (refer to Figure 9-1
– RGUI compatible release shown). This interface allows the transmitter to be controlled
using a PC and a standard web browser. The transmitter can also be equipped with the
optional STXLP RGUI option. When compared to the standard I.P. interface, the RGUI
option provides the user with many additional features.
The web interface requires a Windows computer. The following text presents the
computer requirements. If I.P. control is to be used, it is strongly recommended the
control system be implemented using a VPN and behind a firewall.
 Windows XP – Reasonable processor speed.
 Windows Internet Explorer 7 or newer.
 High speed I.P. connection.

9.1 Standard I.P. Interface

The standard STXLP transmitter I.P. interface is shown in Figure 9-1. The
following text presents the procedure to use the standard I.P. control with
Microsoft Internet Explorer. If a delay in loading the page is observed, select the
browser refresh button. To use the standard interface, proceed as follows:

9.2 Maximum Number And Type Of RGUI/Web Users

The transmitter can support up to a maximum of 3 simultaneous RGUI/Web users.
The optional RGUI users have precedence. Therefore, if 2 RGUI users and one
web user are connected and another RGUI user logs in, the web user session will
be terminated.

©2013 Broadcast Electronics

 - 69 -

Figure 9-1: Standard I.P. Interface Pages - Sheet 1 of 2

©2013 Broadcast Electronics - 69 -

 - 70 -

10

11

24
12

23
13

22
14

21
15

20
16

17

18

19

Figure 9-2: Standard I.P. Interface Pages - Sheet 2 of 2

©2013 Broadcast Electronics

 - 71 -

Table 9-1: Standard I.P. Interface Features

No. Feature Description
1 Transmitter Faults Displays the status of the transmitter faults. The faults include: 1)
audio, 2) exciter, 3) controller, 4) PA, 5) PA power supply, 6)
VSWR, 7) Failsafe, and 8) mute.
2 Transmitter Readings/ Displays the transmitter: 1) forward power, 2) reflected power, 3)
Indications frequency, 4) on/off status, and 5) remote enable status.
3 PA1 – Data and Faults Displays the PA data: 1) forward power, 2) reflected power, 3) RF
input, 4) IPA current, 5) final transistor 1 thru 4 current, 6)
temperature, and 7) power supply voltage. Additional PA’s are
displayed for 2 kW, 3 kW, and 5 kW models.
4 Modulation Meter Displays the transmitter modulation.
5 Transmitter Data 1 This table displays the status of: 1) exciter – internal/external, 2)
of 2 audio input – composite/AES/Analog L/R, 3) PA mode – FM
Only/FM+HD/HD Only, 4) stereo mode – stereo/mono L/mono
R/mono L+R, 5) preemphasis – 50 uS/75 us/None, 6) pilot –
on/off, 7) pilot level, 8) time and 9) date.
6 Transmitter Data 2 This table displays the status of: 1) emergency power setting, 2)
of 2 transmitter serial number, 3) controller software version, 4) exciter
software version, and 5) fault display.
7 Login Password Allows the user to enter a password to access the transmitter
control page. Password is 6 digits.
8 Transmitter Control Link to the transmitter control page. This is active only when the
Page Link user is logged in with the correct password.
9 Transmitter Status Displays the status of essential transmitter operating parameters
on the control page. The parameters include: 1) forward power,
2) reflected power, 3) frequency, 4) on/off status, 5) remote
enabled/disabled status, and 6) modulation level.
10 Control Buttons 1 of 2 Control buttons – 1) transmitter on, 2) transmitter off, 3) remote
enable/disable, and 4) fault reset.
11 Control Buttons 2 of 2 Control buttons – 1) raise power, 2) lower power, 3) raise audio
level, and 4) lower audio level.
12 Set Power Allows the user to enter a value to set the transmitter output
power level in watts. The power level range is determined by the
PA operating mode.
13 Set Frequency Allows the user to enter the transmitter frequency. The frequency
is entered in 10 kHz increments using the following format:
Example – 88.5, 92.55
14 Pilot On/Off Allows the user to enable/disable the pilot. Optional stereo
generator circuit board required.
15 Set Audio Input Allows the user to set the audio input. Optional stereo generator
circuit board required.
16 Set Date Allows the user to enter the date in the following format –
12/12/12.
17 Set Internal/External Allows the user to select the internal or an external exciter.
Exciter
17 Set Date Allows the user to enter the date in the following format –
12/12/12.
18 Transmitter Status Link to the transmitter status page.
Page Link

©2013 Broadcast Electronics - 71 -

- 72 -

19 Install Option Key Allows the user to send an option key to the transmitter.
20 Set Time Allows the user to enter the time in the following format – 12:12
AM.
21 Set Preemphasis Allows the user to set the preemphasis. Optional stereo
generator circuit board required.
22 Set Pilot Level Allows the user to set the pilot level using the following format –
10.1. Optional stereo generator circuit board required.
23 Set Audio Mode Allows the user to select the audio mode: 1) stereo, 2) mono L, 3)
mono R, or 4) mono L+R. Optional stereo generator circuit board
required.
24 Set Emergency Power Allows the user to set the emergency power level.

1. For normal network/I.P. connections, ensure a normal Ethernet patch cable is

connected between the transmitter ETHERNET connector and the network. If
a PC is to be directly connected to the transmitter, connect an Ethernet
crossover cable between the PC Ethernet port and the transmitter ETHERNET
connector. For direct PC connections, the PC must be configured for the I.P.
family of the transmitter. Ensure the PC is configured for the transmitter I.P.
family.

NOTE: TO ENSURE OPERATIONAL INTEGRITY OF THE STX LP TRANSMITTER

WHILE USING IP CONTROL, IT IS STRONGLY RECOMMENDED THAT THE UNIT
BE INSTALLED ON A PRIVATE NETWORK, BEHIND A FIREWALL, WITH
SECURED VIRTUAL PRIVATE NETWORK (VPN) ACCESS.

2. The transmitter must be assigned the desired I.P. address, subnet mask, and
gateway. If required, refer to Section 8 and ensure the desired I.P. address,
subnet mask, and gateway are assigned to the transmitter.
3. On the PC, start Internet Explorer.
4. Refer to Figure 9-3 and enter the transmitter I.P. address as shown.
5. Depress Enter.
The standard web interface page will appear. Figure 9-1 and Table 9-1
presents the standard web interface features.
6. If the status page does not appear, use the Ping command to check and
troubleshoot the connection.
7. The control page can be used to view and control transmitter parameters in a
manner similar to the front panel. Refer to Figure 9-1 and Table 9-1 to
operate the transmitter.
8. To access the control page as Chief, proceed as follows:
A. On the status page, select CHIEF.
B. Use the keyboard to enter the Chief password.
C. Select ENTER.
If the password is valid, the standard web interface control page will
appear.
D. Repeat the procedure for the operator using the operator password.

©2013 Broadcast Electronics

 - 73 -

ENTER THE TRANSMITTER I.P.

ADDRESS HERE. EXAMPLE –
10.2.4.100.

Figure 9-3: Internet Explorer

9.3 Optional STXLP RGUI I.P. Control

The transmitter can also be equipped with the optional STXLP RGUI option.
When compared to the standard I.P. interface, the RGUI option provides the user
with many additional features. Refer to the STXLP RGUI option manual for
installation and operating information.

©2013 Broadcast Electronics - 73 -

- 74 -

10 Maintenance
10.1 Diagnostics
If a fault occurs, information on the fault can be obtained by selecting the
<DIAGNOSTICS> CONTROLLER menu. If the fault is located in the PA, the
information can be located by selecting the <DIAGNOSTICS>  PA menu. For 2
kW, 3 kW, and 5 kW models, a fault can be located in the combiner by selecting
the <DIAGNOSTICS>  COMBINER menu. A fault can be reset by selecting the
<DIAGNOSTICS> FAULT RESET FAULT RESET YES/NO menu. The following
text presents the transmitter and PA diagnostic information.
Table 10-1: Troubleshooting table

TRANSMITTER
FAULT TROUBLESHOOTING TASKS
Failsafe - Open The transmitter failsafe is open. Check the equipment external to
the system.
PLL Fault The internal exciter VCO is unlocked. Check the power supply
voltages on the exciter. Check the cables between the controller
and the exciter.
VSWR Shutdown The transmitter has detected a VSWR condition of greater than
2.0:1. Check the antenna. If the antenna is ok, check the RF
output connector and low-pass filter assembly.

©2013 Broadcast Electronics

 - 75 -

Controller Fault This indicates a fault has occurred in the main controller. As a
result, control of the system has been switched to the backup
controller (see Emergency Control – Backup Controller in the
following text). When this occurs, the transmitter:
 The controller LED will flash red.
 Depending on the failure, the LCD display will be blank or
frozen.
 The transmitter will operate at the power level entered in
the <SETUP>  EMERGENCY PWR menu.
Ignore all other front panel indicators. The indicators may not
provide accurate information.
Exciter Fault A fault has been detected in the transmitter exciter. Ensure DS1
through DS6 LEDs are illuminated green. Ensure the cables
connected to J2 and J7 are secure.
PA MODULE
FAULT TROUBLESHOOTING TASKS
VSWR Shutdown The PA module is in VSWR shutdown. Check the antenna. In 2
kW, 3 kW, and 5 kW models, check the combiner. Check the
low-pass filter.
VSWR Foldback The PA module is in VSWR foldback. Check the antenna. In 2
kW, 3 kW, and 5 kW models , check the combiner. Check the
low-pass filter.
RF Input The PA RF input is low or missing. If the internal exciter is
selected, check: 1) the cable between the EXEC RF OUT and the
PA RF IN connectors 2) check the exciter. If the external exciter is
selected, check the external exciter.

Power Supply A fault has been detected in the PA power supply. Check the PA
power supply for an over-voltage, current foldback, or over-
temperature condition.
Current Foldback The PA is in current foldback. Check the low-pass filter. In 2 kW,
3 kW, and 5 kW models, check the combiner.
Temperature Fault The PA is in temperature fault. Check the fan.
Temperature Foldback The PA is in temperature foldback. Check the fan.
COMBINER
FAULT TROUBLESHOOTING TASKS
RF IN Fault The combiner splitter RF input level is below 2.5 mW. Check the
exciter RF output level and cabling between the exciter and the
combiner. Ensure the BE splitter cables are used.
Input Overdrive Fault The combiner splitter RF input level is above 250 mW. Check the
exciter RF output level and cabling between the exciter and the
combiner.
Over temperature The combiner temperature is above 118 C. The combiner fan has
Fault two speeds: 1) high and 2) low. Check the fan and the fan
speed.
VSWR Fault A VSWR condition of greater than 1.5:1 is present at the
combiner RF output. Check the antenna and the combiner.
Splitter Muted The combiner splitter is muted. This can be caused by: 1) an RF
input overdrive condition or 2) a temperature above 118 C.
Check the RF input and the combiner temperature.

©2013 Broadcast Electronics - 75 -

- 76 -

10.2 Software Update – Controller/Exciter

The transmitter controller and exciter contain software which can be changed
using the STXLP software update application. The software update can be
performed: 1) locally at the transmitter with a direct connection between a PC
and the transmitter or 2) remotely using I.P to access the transmitter subnet.
The software update program requires a Windows computer. The following text
presents the computer requirements -
 Windows XP – 500 MHz or greater.
 High speed wired I.P. connection.
Terminate all other running programs during the download. It is recommended
the computer be on the same local network as the transmitter. Once the
software is downloaded to the transmitter, the controller must be reset or the AC
power cycled (off then on) to load the new version. To update the
controller/exciter software, proceed as follows:

NOTE: IT IS RECOMMENDED THE COMPUTER BE ON THE SAME LOCAL NETWORK

AS THE TRANSMITTER.

NOTE: DO NOT CYCLE THE AC POWER DURING THE UPDATE PROCESS. ENSURE
THE CODE HAS BEEN INSTALLED BEFORE AC POWER IS CYCLED.

1. Connect the transmitter to the PC or network/I.P. For normal network/I.P.

connections, ensure a normal Ethernet patch cable is connected between the
transmitter ETHERNET connector and the network. If a PC is to be directly
connected to the transmitter, connect an Ethernet crossover cable between
the PC Ethernet port and the transmitter ETHERNET connector. For direct PC
connections, the PC must be configured for the I.P. family of the transmitter.
Ensure the PC is configured for the transmitter I.P. family.
2. Using Windows Explorer, copy all of the software files to a folder on the hard
drive “C:\” of the PC. Unzip the files (if they have been zipped) ensuring that
all of the files remain in the “STXLP Upgrade” directory.
3. On the PC, terminate all running programs.
4. Terminate all transmitter I.P. users.
5. On the PC, using Windows Explorer, navigate to the directory on the hard
drive of the PC where you copied the upgrade files to and double click on the
AutoUpdate.exe application icon.
The AutoUpdate program will appear.

Figure 10-1: STXLP AutoUpdate Program

©2013 Broadcast Electronics

 - 77 -

6. Once the AutoUpdate application has launched, enter the STXLP Transmitter
I.P. Address.

NOTE: DO NOT CYCLE THE AC POWER DURING THE FLASH WRITE PROCESS.

NOTE: IF A PROBLEM OCCURS, SELECT CANCEL TO STOP THE DOWNLOAD.

7. Select DOWNLOAD.
The status bar presents the progress of the download and flash writing
process.
8. When finished, select QUIT.
9. Cycle the AC power (operate to off then on) to activate the code.
10. Refer to Section 8 and check the software version using the DIAGNOSTICS
TRANSMITTER menu.
11. If the download fails such as from a lost I.P. connection, repeat the
procedure.

10.3 Emergency Control – Backup Controller

If a controller fault occurs, the transmitter will be operating from the backup
controller. When this occurs:
 The front panel CNTL LED will flash red.
 Depending on the failure, the LCD display will be blank or frozen.
 The transmitter will operate at the power level entered in the SETUP
EMERGENCY PWR menu.
 Ignore all other front panel indicators. The indicators may not provide
accurate information.
 The following remote functions will be functional: 1) mute, 2) failsafe, 3)
transmitter on, 4) transmitter off, 5) AFC lock status, and 6) fault status.

CAUTION: FOR STXLP-5kW MODELS, IT IS RECOMMENDED THE UNIT OPERATE

AT A MAXIMUM OF 3330W IN EMERGENCY POWER MODE TO
PREVENT DAMAGE TO THE COMBINER.
For STXLP-1kW, 2kW, and 3kW models, the units can be operated at any
emergency power setting. For STXLP-5kW models, it is recommended the unit
operate at a maximum of 3330W in emergency power mode to prevent damage
to the combiner. This will allow for a simultaneous controller and PA failure. This
level can be increased if all PAs are operating normally. The transmitter can be
operated in this condition for an extended period of time. However, the unit will
be operating with no automatic power control.
Typical causes of a controller failure are: 1) an improper download or 2) problems
with the power supplies on the controller pcb assembly. To troubleshoot and
repair the controller, the transmitter must be removed from on-air operation. To
reprogram the software, refer to Software Update – Controller/Exciter in the
preceding text and re-program the transmitter software. To replace the controller
circuit board, refer to the Replace The Controller procedure in the following text.

©2013 Broadcast Electronics - 77 -

- 78 -

10.4 Front Panel and Circuit Board Indicators

Several of the transmitter circuit boards contain LEDs to provide operational status
of the circuitry. The following text presents the circuit board indicators:

Table 10-2: Front Panel and Circuit Board Indicators

FRONT PANEL INDICATORS
STXLP – 1kW UNIT
INDICATOR DESCRIPTION
AUDIO The audio indicator illuminates red if no modulation is detected in the
selected audio input source for a period of time. The indicator
illuminates green during normal operation.
EXCITER The exciter indicator illuminates red if the internal exciter: 1) AFC
(Automatic Frequency Control) becomes unlocked or 2) a
communication fault occurs. The indicator illuminates green during
normal operation.
PA For 1 kW models, the PA indicator illuminates red if a fault is detected in
the PA module. For 2 kW, 3 kW, and 5 kW models, the PA indicator
illuminates red if a fault is detected in any PA module. The indicator
illuminates green during normal operation.
VSWR The VSWR indicator illuminates red when a greater than 1.5:1 VSWR
condition is detected. The indicator illuminates green during normal
operation.
PS For 1 kW models, the PS indicator illuminates red if a fault is detected in
the PA power supply module. For 2 kW, 3 kW, and 5 kW models, the PS
indicator illuminates red if a fault is detected in any PA power supply
module. The indicator illuminates green during normal operation.
CNTL The CNTL indicator flashes red when a fault has been detected in the
controller and the unit has switched to the backup controller.
FAILSAFE The FAILSAFE indicator illuminates red when the failsafe is opened. The
indicator illuminates green when the failsafe is closed.
PA ONLY UNIT
INDICATOR DESCRIPTION
DRV The drive indicator illuminates red if no RF is present at the input. The
indicator illuminates green during normal operation. The indicator is red
when the transmitter RF is off.
PA The PA indicator illuminates red if a fault is detected in the PA module.
The indicator illuminates green during normal operation.
VSWR The VSWR indicator illuminates red when a greater than 1.5:1 VSWR
condition is detected. The indicator illuminates green during normal
operation.
PS The PS indicator illuminates red if a fault is detected in the PA power
supply module. The indicator illuminates green during normal
operation.

©2013 Broadcast Electronics

 - 79 -

COMBINER UNIT
INDICATOR DESCRIPTION
SPLITTER RF IN The splitter RF in indicator illuminates red if the RF input level is too low
or high. The indicator illuminates green during normal operation. The
indicator is red when the transmitter RF is off.
COMBINER TEMP The combiner temp indicator illuminates red if he combiner temperature
is above 118 C. The indicator illuminates green during normal
operation.
VSWR The VSWR indicator illuminates red when a greater than 1.5:1 VSWR
condition is detected. The indicator illuminates green during normal
operation.
PS The PS indicator illuminates red if a fault is detected in the combiner
+12V power supply module. The indicator illuminates green during
normal operation.
EXCITER CIRCUIT BOARD
INDICATOR DESCRIPTION
DS2 Illuminates green to indicate the exciter is AFC (Automatic-Frequency-
Control) is locked.
DS3 Illuminates green to indicate the +12V supply is operational.
DS4 Illuminates green to indicate the +6V supply is operational.
DS5 Illuminates green to indicate the +5V supply is operational.
DS6 Illuminates green to indicate the +3.3V supply is operational.
DS8 Illuminates green to indicate the -5V supply is operational.
DS9 Illuminates green to indicate the -12V supply is operational.
CONTROLLER CIRCUIT BOARD
DS1 Illuminates green to indicate the controller microprocessor has
successfully loaded the firmware.
DS2 Flashes green to indicate the controller microprocessor software is
operational.
DS3 Flashes blue to indicate the controller microprocessor hardware is
operational.
DS4 Illuminates red to indicate the controller circuit board is in reset.
DS5 Illuminates green to indicate debug input activity.
DS6 Illuminates green to indicate debug output activity.
DS7 Illuminates green to indicate the 3.3V supply is operational.
DS8 Illuminates green to indicate the +3.3V PA supply is operational.
DS9 Illuminates green to indicate the +2.5V PLL supply is operational.
DS10 Illuminates green to indicate the +1.2V supply is operational.
DS11 Illuminates green to indicate the +5V supply is operational.
DS12 Illuminates green to indicate the +1.2V PLL supply is operational.

©2013 Broadcast Electronics - 79 -

 - 80 -

PA MODULE
DS1 Illuminates red to indicate a VSWR foldback is present.
DS2 Illuminates red to indicate a VSWR shutdown is present.
DS6 Illuminates red to indicate an overcurrent foldback is present.
DS7 Illuminates red to indicate the +48V status.
DS10 Illuminates red to indicate the +5V status.
DS12 Illuminates red to indicate RF drive is not present.
DS32 Illuminates red to indicate a mute is present..
OPTIONAL STEREO GENERATOR CIRCUIT BOARD
DS1 Illuminates to indicate +5V is present.
DS2 Illuminates to indicate +1.8V is present.
DS3 Illuminates to indicate +3.3V is present.
DS5 Illuminates to indicate +12V is present.
DS15 Illuminates to indicate +1.8V is present.
DS6 Illuminates to indicate software is initialized.
DS4 Illuminates to indicate AES cable is in use.

10.5 Power Output with PA Failures

For STXLP – 2 kW, 3 kW, and 5 kW models, the transmitter will attempt to
maintain on-air operation during a PA failure. For example, if a 3 kW unit is
operating at 3 kW and one PA fails completely, the unit will output a specific
output power level. If a 3 kW unit is operating at 1.3 kW, the transmitter will
increase the output power in the remaining 2 operating PAs to maintain a 1.3 kW
power level. A 5 kW unit will operate in a similar manner with the addition of
ambient air de-rating.
The following text presents the typical output power for complete PA failure
conditions. If a PA unit fails partially (such as 1, 2, or 3 final transistors), the
transmitter output power will be higher than shown.
STXLP 2 kW Models

FAILURE CONDITION – 2 kW Models RF OUTPUT PWR LEVEL.

Programmed RF Out Between 2 kW and 500W With 1 Failed PA. 500 Watts

STXLP 3 kW Models

FAILURE CONDITION – 3 kW Models RF OUTPUT PWR LEVEL.

Programmed RF Out Between 3 kW and 1333 W With 1 Failed PA. 1333 Watts.
Programmed RF Out Between App. 1332 kW and 750 W With 1 Failed PA Programmed RF Out Pwr.
Programmed RF Out Between 3 kW and 750 W With 2 Failed PAs 333 Watts.

©2013 Broadcast Electronics

 - 81 -

STXLP 5 kW Models

FAILURE CONDITION – 5 kW Models RF OUTPUT PWR LEVEL.

Programmed RF Out Between 5 kW and App. 3200 W With 1 Failed PA at 18C. 3200 Watts.
Programmed RF Out Between App. 3200 W and 1250 W With 1 Failed PA at 18C. Programmed RF Out Pwr.
Programmed RF Out Between 5 kW and App. 3150 W With 1 Failed PA at 20C. 3150 Watts.
Programmed RF Out Between App. 3150 W and 1250 W With 1 Failed PA at 20C. Programmed RF Out Pwr.
Programmed RF Out Between 5 kW and App. 2800 W With 1 Failed PA at 30C. 2800 Watts.
Programmed RF Out Between App. 2800 W and 1250 W With 1 Failed PA at 30C. Programmed RF Out Pwr.
Programmed RF Out Between 5 kW and App. 2500 W With 1 Failed PA at 40C. 2500 Watts.
Programmed RF Out Between App. 2500 W and 1250 W With 1 Failed PA at 40C. Programmed RF Out Pwr.
Programmed RF Out Between 5 kW and App. 2133 W With 1 Failed PA at 50C. 2133 Watts.
Programmed RF Out Between App. 2133 W and 1250 W With 1 Failed PA at 50C. Programmed RF Out Pwr.
Programmed RF Out Between 5 kW and 1250 W With 2 Failed PAs 1800 Watts.
Programmed RF Out Between 5 kW and 1250 W With 3 Failed PAs 800 Watts.
Programmed RF Out Between 5 kW and 1250 W With 4 Failed PAs 200 Watts.

10.6 Troubleshooting Information

WARNING: IF THE PA AND TOP COVERS ARE REMOVED, DO NOT TOUCH ANY
COMPONENT ON THE PA ASSEMBLY OR POWER SUPPLY ASSEMBLIES.
Figure 10-2 and Figure 10-3 presents STXLP 1kW model troubleshooting
information. If the PA or top covers are removed, do not touch any component
on the PA assembly or power supply assemblies.

©2013 Broadcast Electronics - 81 -

- 82 -

Figure 10-2: STXLP Troubleshooting (Sheet 1 of 5) – 1kW Model

©2013 Broadcast Electronics

 - 83 -

Figure 10-2: STXLP Troubleshooting (Sheet 2 of 5) – 1kW Model

©2013 Broadcast Electronics - 83 -

- 84 -

Figure 10-2: STXLP Troubleshooting (Sheet 3 of 5) – 1kW Model

©2013 Broadcast Electronics

 - 85 -

Figure 10-2: STXLP Troubleshooting (Sheet 4 of 5) – 1kW Model

©2013 Broadcast Electronics - 85 -

- 86 -

Figure 10-2: STXLP 1kW Troubleshooting (Sheet 5 of 5) 1kW Model

©2013 Broadcast Electronics

 - 87 -

Figure 10-3: STXLP Troubleshooting (Sheet 1 of 2) 2kW/3kW/5kW Models

©2013 Broadcast Electronics - 87 -

- 88 -

Figure 10-4: STXLP Troubleshooting (Sheet 2 of 2) 2kW/3kW/5kW Models

©2013 Broadcast Electronics

 - 89 -

10.7 Replace the Exciter

To replace the exciter, refer to Figure 10-5 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Remove the BNC lock nuts from the COMP, SCA2, 19 kHz OUT, EXC RF OUT,
SCA1, and RDS connectors.
4. Remove the screws from the AES, LEFT, and RIGHT XLR connectors.
5. Disconnect power control cable J7 and ribbon cable J2.
6. Remove the mounting screw.
7. Firmly remove the board from the unit.
8. Snap the new exciter circuit board into the standoffs and secure the
mounting screw.
9. Re-connect the cables.
10. Re-connect the VCO.
11. Replace the BNC lock nuts and the XLR hardware.
12. Replace the transmitter top cover.

Optional Stereo
Generator
Assembly

Exciter Assembly

Figure 10-5: Replacing the Exciter/Stereo Generator

©2013 Broadcast Electronics - 89 -

- 90 -

10.8 Replace the Optional Stereo Generator

To replace the optional stereo generator, refer to Figure 10-5 and proceed as
follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.

CAUTION: TO REMOVE OR INSERT THE STEREO GENERATOR PCB, GENTLY ROCK

THE PCB IN THE SOCKET TO PREVENT DAMAGE TO THE SOCKET PINS.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Unplug the stereo generator from the socket.
4. Align the stereo generator circuit board tab with the hole and insert the
replacement board.
5. Replace the transmitter top cover.

10.9 Replace the Controller

To replace the controller in 1 kW models (the main control unit in 2 kW, 3 kW,
and 5 kW models), refer to Figure 10-6 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Disconnect ribbon cables connected to J10, J7, J8, and J13.
4. Disconnect dc power cable J14.
5. Remove the mounting screw.
6. Firmly remove the board from the unit.
7. Snap the new controller circuit board into the standoffs and secure the
mounting screw.
8. Re-connect the cables.
9. Replace the transmitter top cover.

©2013 Broadcast Electronics

 - 91 -

Figure 10-6: Replacing the Controller

©2013 Broadcast Electronics - 91 -

- 92 -

10.10 Replace the Fan

To replace the fans in PA units, refer to Figure 10-7 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Cut safety tie-wrap holding fan assembly in.
4. Disconnect the cables connected to the fan and PA Power supply Mother
board.
5. Disconnect the fan assembly power supply cable.
6. Lift the assembly up and out of the unit.
7. Insert the new fan assembly.
8. Re-connect the power supply cable.
9. Secure a tie-wrap as was removed.
10. Replace the transmitter top cover.

Fan assembly
lifts straight up.

Disconnect
cables

Figure 10-7: Replacing the Fan

©2013 Broadcast Electronics

 - 93 -

10.11 Replace the PA Module Assembly

The PA module consists of the PA assembly and the combiner assembly. To
replace the PA module assembly PA units, refer to Figure 10-8 and proceed as
follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Remove the PA cover.
4. Unsolder the 3 RF output wires (RF output and 2 ground) from the PA
module.
5. Disconnect the ribbon cable connected to J13.
6. On the PA, remove the mounting hardware from transistors Q1 thru Q4 and
Q8.
7. On the combiner, remove the mounting hardware from R1, R2, and R3.
8. Remove the mounting hardware from the PA and combiner circuit boards.
9. Remove the PA module assembly.
10. Remove the PA module assembly from the shipping plate.
11. Apply thermal compound to the PA transistors and the combiner resistors.
12. Gently place the PA module assembly on the heatsink.
13. Secure the PA transistor hardware the combiner resistor hardware.
14. Secure the PA and combiner mounting hardware.
15. Re-solder the RF output wires to the PA module.
16. Re-connect the cable.
17. Replace the PA cover
18. Replace the transmitter top cover.

©2013 Broadcast Electronics - 93 -

- 94 -

Figure 10-8: Replacing the PA Module

©2013 Broadcast Electronics

 - 95 -

10.12 Replace the PA Power Supply Module

To replace a PA power supply module assembly in PA units, refer to Figure 10-9
and Figure 10-10 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a Philips screwdriver, remove the power supply cover plate on the
transmitter rear panel.
3. Insert Philips screwdriver into exposed holes to loosen 2 Philips screws inside
allowing retainer to be slide to the side (on -007 power supplies only).
4. Unlock the power supply by rotating the power supply locking knob
counterclockwise to disengage the mechanism.
5. Gently pull on the power supply handle and slide the unit out of the chassis.
6. Insert and slide the new power supply into the chassis. Firmly push the unit
to engage the power supply connector.
7. Lock the power supply by rotating the power supply locking knob clockwise
to engage the mechanism.
8. Slide retainer over and tighten screws (on -007 power supplies only).
9. Replace the power supply cover plate.

©2013 Broadcast Electronics - 95 -

- 96 -

Figure 10-9: Replacing the -002 Power Supply Module

©2013 Broadcast Electronics

 - 97 -

Power Supply Cover

Plate

Mounting Screws

Handle

2) Slide Bracket
1) Loosen
screws

3) Unlock
Power Supply

Figure 10-10: Replacing the -007 Power Supply Module

©2013 Broadcast Electronics - 97 -

- 98 -

10.13 Replace the Front Panel Display Board

To replace the front panel display board in PA units, refer to Figure 10-11 and
proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Disconnect the ribbon cable connected to J2.
4. Using a flat-blade screw driver, gently pry the front panel circuit board from
the chassis.
5. Snap the new front panel circuit board into the standoffs.
6. Re-connect the ribbon cable.
7. Replace the transmitter top cover.
1. Replace the transmitter top cover.

Figure 10-11: Replacing the Front Panel Display Board

10.14 Replace the Low-Pass Filter Assembly

To replace the low-pass filter in PA units, refer to Figure 10-12 and proceed as
follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
2. Disconnect all transmitter primary power.
3. Using a screwdriver, remove the transmitter top cover.
4. Disconnect the ribbon cable connected to J1.
5. Remove the hardware from the RF OUT and RF SAMPLE connectors.
6. Unsolder the RF input wires from the low-pass filter circuit board.
7. Remove the low-pass filter mounting hardware.
8. Insert the new low-pass filter assembly and secure the mounting hardware.
9. Re-connect the ribbon cable.
10. Re-solder the RF input wires to the low-pass filter circuit board.

©2013 Broadcast Electronics

 - 99 -

Figure 10-12: Replacing the Low-Pass Filter

10.15 Replace a Final Transistor on the PA Module

To replace a transistor on a PA module, refer to Figure 10-13 and perform the
following procedure. The procedure replaces and adjusts section Q1. Sections
Q2 through Q4 are identical.

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the transmitter top cover.
3. Remove the PA cover.
4. Replace Q1 transistor as follows:
A. Refer to Figure 10-13 and locate transistor section Q1.
B. Unsolder the leads from the transistor.
C. Remove the mounting hardware.
D. Apply a film of thermal grease to the transistor flange.
E. Secure the transistor to the heatsink using the mounting hardware.
F. Solder the transistor leads to the pads.
5. Align the transistor as follows:
A. Remove P6/P10.
B. Adjust potentiometer R137 for 0.8 Amps on the FINAL I display.
C. Replace P6/P10 in position 2-3.

©2013 Broadcast Electronics - 99 -

- 100 -

D. On the front panel display, access the main menu to display forward
power.
E. Adjust capacitors C104/C105/C101 for maximum output power on the
front panel display.
F. On the front panel display, access the PA Data.
G. Check the Q1 final current. The current should be nearly identical to the
currents displayed for Q2 through Q4.
H. If the current requires adjustment, re-adjust C104/C105/C101 for a
current reading similar to Q2 through Q4.
6. Replace the PA cover.
7. Replace the transmitter top cover.

Figure 10-13: Replacing A Transistor On The PA Module

©2013 Broadcast Electronics

 - 101 -

10.16 Replace the add-on PA Unit Controller

To replace the controller in an add-on PA unit used in STX2, STX3 and STX5, refer
to Figure 10-14 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the top cover.
3. Disconnect ribbon cable connected to J2.
4. Disconnect dc power cable J3.
5. Remove the mounting screw.
6. Firmly remove the board from the unit.
7. Snap the new controller circuit board into the standoffs and secure the
mounting screw.
8. Re-connect the cables.
9. Replace the transmitter top cover.

Figure 10-14: Replacing the add-on PA Controller

©2013 Broadcast Electronics - 101 -

- 102 -

10.17 Replace the Combiner Fan

To replace the combiner fan, refer to Figure 10-15 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the combiner top cover.
3. Rotate the two tabs 90˚ to allow tab to slip out of slot.
4. Cut the two wire ties securing the top corners of the fan to the chassis
5. Slide the fan out of the assembly.
6. Un-plug the fan dc connector from the header.
7. Slide the replacement fan into the assembly.
8. Re-connect the fan dc connector.
9. Insert the two tabs into the slots pulling tight until the tabs can return to the
original orientation.
10. Install two wire ties where previously removed.
11. Replace the combiner top cover.

Rotate tab to slide through slot.

Normal locked orientation.

Figure 10-15: Replacing the Combiner Fan

©2013 Broadcast Electronics

 - 103 -

10.18 Replace the Combiner Fan or Low Voltage Power

Supply
To replace the combiner fan, refer to Figure 10-16 and proceed as follows:

WARNING: ENSURE ALL PRIMARY POWER IS DISCONNECTED BEFORE

PROCEEDING.
1. Disconnect all transmitter primary power.
2. Using a screwdriver, remove the combiner top cover.
3. Refer to Figure 10-16 and locate the desired supply to be replaced.
4. Disconnect the power supply ac input and dc output connectors.
5. Remove the mounting screws and the power supply.
6. Insert the replacement power supply and secure the mounting screws.
7. Re-connect the power supply cables.
8. Replace the combiner top cover.

Fan Power Supply

Low Voltage Power Supply

Figure 10-16: Replacing the Combiner Power Supply

©2013 Broadcast Electronics - 103 -

 - 104 -

11 BE Part Numbers
This section provides parts lists for the STX LP Transmitters. The parts lists provide descriptions and
part numbers of electrical components, assemblies, and selected mechanical parts required for
maintenance. Each parts list entry in this section is indexed by reference designators appearing on
the applicable schematic diagrams.

This bill of material uses an indented structure to show relationships of parts into sub assemblies.
Example; all BOM LEVEL 2 parts are contained in the BOM LEVEL 1 part immediately above it.

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4102-001 TX,FM,STX,1KW,NO MAN/INST KITS
..1 400-0207 STRIP,QUIET SHIELD,.250x.375"" 7.083
..1 420-6606 SCREW,6-32X.375,S.S. PH FH UC 9
..1 421-6020 6-32 THUMB NUT 1
..1 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 3
..1 469-0366 FINGER STOCK (NOTE!!!!!) 0.111
..1 469-5500 FINGER STOCK,TECH-ETCH 250P37-16-02 0.833
..1 471-4205-100 COVER WELDMENT,STX LP,NEW PS 1
..1 471-4209-200 COVER,NEW PS,STX LP 1
SAFETY SHIELD FOR ELECTRICAL SOURCE
..1 471-4225 STX LP 1
..1 594-0019 LABEL,DANGER HV 1X 1.5 1
LABEL, WARNING-ONLY AUTHORIZED
..1 594-0505 PERSONNEL 1
TX,FM,STX,1KW,NO MAN/INST KITS,BASIC
..1 909-4102-001T TEST 1
....2 324-2500 LIGHTPIPE,0.197 DIA,0.5 LONG, PANEL MT. 7
....2 349-0020 SWITCH, ROCKER, DPST, 20A 1
....2 400-0207 STRIP,QUIET SHIELD,.250x.375"" 6
....2 409-0126 CARD GUIDE,4.5 LG 2
....2 411-7086 TERM BLK FEED-THRU 1-4MM GRAY 2
....2 411-7866 TERM BLK,FEED-THRU,1-4MM GRN/YEL 1
....2 420-0817 ASSY,FEMALE SCREWLOCK 205817-1 1
SCREW,M3X8MM,PPH,SEM,STEEL,ZINC
....2 420-3151 PLATING 6
....2 420-4124 SCREW,4-40X1.500,S.S. PH 6
....2 420-6114 SCREW,6-32X.875,S.S. PH 4
....2 420-9720 RETAINER,NUT,OD:0.26,FITS SHAFT 5/32"" 7
....2 421-6008 6-32 KEP NUT 3
SCREW,10-32 X 5/8,PPH,SEM,STEEL,ZINC
....2 422-0110 PLATING" 6
....2 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 10
....2 423-4002 #4 LOCK S.S. SPLIT 7
....2 423-6002 #6 LOCK SPLIT 4
....2 441-0184 STOFF,6-32,MALE-FEMALE,3/8 1
STOFF,SS,3/16 HEX X 1" LONG, MALE-
....2 441-4513 FEMALE 440" 1
....2 467-0001 EXTRUSION,RUBBER 0.063
....2 469-0022 FINGER STOCK,LAIRD 97-654,12 LONG" 2
....2 471-4200-300 WELDMENT,CHASSIS,STX 1KW,NEW PS 1

©2013 Broadcast Electronics

 - 105 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 471-4201-100 PLENUM, FAN, STX LP 1
FRONT PANEL, STX LP, BASE UNIT,
....2 471-4207 SCREENED 1
....2 471-4212 COVER,PA,STX LP 1
....2 471-4260-100 RETAINER,NEW PS,STX LP 1
....2 471-4262 SPACER PLATE,LPT,STX 1K 1
....2 471-4264 GUARD,STX NEW PS 1
HANDLE, 4 X 1.375", BRASS, CHROME
....2 486-7150 PLATED, #10-32 THREADS" 2
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
....2 500-211 Zinc (External) 9
....2 510-246 Flexible Grommet, (NOTE) 0.213
....2 540-0016-007 PWR SPLY,PFC 53VDC,2KW, TECTROL 1
POWER SUPPLY, 12V 65W AC/DC
....2 540-1012-100 CONVERTER 2X4" STX LP" 1
....2 540-1012-501 POWER SUPPLY 12V 80/100W AC/DC 2X4IN 1
POWER SUPPLY, AC/DC CONVERTER, 40W,
....2 540-1205 +/-12V +5V 1
....2 594-0073 LABEL,WARNING ROTATING FANS 1
....2 594-0503 LABEL, DANGER-HAZARDOUS VOLTAGE 1
LABEL, WARNING-ONLY AUTHORIZED
....2 594-0505 PERSONNEL 1
....2 640-1001 WIRE, 10 GA, TIN PLATED 0.25
....2 700-0089 TAPE,POLYMER,3/4 (54FT ROLLS) 0.012
CBL,ASSY,.050 DOUBLE ROW 10 PIN
....2 849-2010 FEMALE IDC ASSEMBLY,2 INCH 1
CBL,ASSY,.050 DOUBLE ROW 16 PIN
....2 849-2016 FEMALE IDC ASSEMBLY,2 INCH 1
CBL,ASSY,.050 DOUBLE ROW 26 PIN
....2 849-2026 FEMALE IDC ASSY,3.63 INCH 1
CBL,ASSY,.050 DOUBLE ROW 40 PIN
....2 849-2040 FEMALE IDC ASSEMBLY,32 INCH 1
....2 919-4000 ASSY, PCB, EXCITER, STX LP (SBCM) 1
C27, C80, C102,
......3 007-0010 CHIP CERAMIC 10pF 50V 5% 0603 SMD 5 C103, C104
......3 007-0018-006 CAP,0603,18pF,50V,5% 1 C124
C24, C28, C30, C31,
......3 007-0102 CAP,CER,CHIP,1000pF,50V,5%,SMD 7 C32, C120, C126
......3 007-0270-006 CAP,270pF,50v,5%,0603 1 C130
......3 007-1012 CAP,CER,10pF,50V,2%,SMD 3 C48, C123, C125
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 2 C85, C86
C1, C2, C3, C8, C11,
C12, C15, C18, C19,
C20, C21, C29, C34,
C35, C36, C37, C38,
C42, C43, C44, C46,
C47, C49, C50, C51,
C53, C54, C56, C57,
C61, C65, C66, C67,
C68, C71, C74, C78,
C79, C88, C106,
......3 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 45 C108, C109, C111,

©2013 Broadcast Electronics - 105 -

 - 106 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C128, C131
C6, C14, C45, C55,
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 8 C62, C95, C122, C132
......3 007-1054-001 CAP,CER,1UF,10%,10V,X7R,0805,SMD 1 C41
C58, C59, C89, C90,
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 7 C97, C98, C99
C82, C84, C94, C100,
C101, C118, C119,
......3 007-1085-350 CAP,ELECTRO,100uF,35V,20%,SMD 8 C121
......3 007-1512-050 Cap,Cer,15 pF 5%,0603,50V,SMD 1 C25
......3 007-3312 CAP,CER,33pF,50V,2%,SMD 1 C127
......3 007-5100 CAP,CER,5.1pF,50V,.25pF,SMD 3 C23, C73, C107
......3 007-5600 CAP,CER,5.6pF,50V,.25pF,SMD 1 C26
CAP,TANALUM
......3 009-0202 CHIP,100UF,POLAR,10%,6V,SMD 2 C7, C60
......3 020-1087 CAP,LYTIC,100uF,16V,20%,NP 4 C70, C72, C75, C77
......3 020-4793 CAP,LYTIC,4700UF,16V,LOW LEAK 4 C33, C39, C40, C92
......3 023-1075 CAP,LYTIC,10UF,50V NP STDUP 1 C5
CAP,LYTIC,1000uF,35V,20%,LOW
......3 024-0102 ESR,RADIAL 1 C83
......3 070-1054 CAP,TANT,1uF,35V,10%,SMD 1 C93
C4, C17, C22, C52,
......3 070-1065 CAP,TANT,10UF,20V,10%,SMD 8 C63, C81, C87, C91
CAP,TANT,100 MFD,20%,16V,E CASE,LOW
......3 070-1084-L16 ESR,SMD 1 C133
......3 101-0150 Resistor,150 ohm 1/2W 5% SMD 2010 1 R111
R39, R51, R52, R53,
R54, R88, R104,
R105, R125, R133,
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 11 R138
R48, R87, R91, R93,
R97, R108, R134,
R135, R136, R137,
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 13 R159, R161, R165
R9, R11, R15, R16,
R21, R23, R27, R29,
R38, R40, R62, R84,
R85, R99, R101,
R114, R145, R146,
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 20 R147, R168
R1, R2, R3, R4,
R30, R33, R45, R49,
R50, R56, R58, R60,
R61, R63, R65, R66,
R67, R68, R69, R70,
R71, R72, R73, R74,
R75, R76, R77, R78,
R79, R80, R83, R86,
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 35 R89, R94, R106
R6, R7, R8, R10,
R12, R13, R14, R17,
R18, R19, R20, R31,
......3 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 17 R32, R112, R152,

©2013 Broadcast Electronics

 - 107 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
R167, R172
......3 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 1 R100
......3 102-1200 RES,CHIP,121 OHMS,1/10W,1%,SMD (NOTE) 1 R118
......3 102-1400 RES,CHIP,1.4K OHMS,1/10W,1%,SMD 1 R163
......3 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R160
R92, R98, R140,
......3 102-1741 RES,CHIP,1.74K OHMS,1/10W,1%,SMD 4 R142
R35, R81, R82,
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 5 R113, R164
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 2 R41, R148
......3 102-2002 RES,CHIP,20.0K OHMS,1/10W,1%,SMD 1 R158
......3 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 1 R124
......3 102-2741 RES,CHIP,2.74K OHMS,1/10W,1%,SMD 2 R34, R157
......3 102-3011 RES,CHIP,3.01K OHMS,1/10W,1%,SMD 1 R44
......3 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 1 R116
......3 102-3321 RES,CHIP,3.32K OHMS,1/10W,1%,SMD 1 R162
......3 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R25
......3 102-3653 RES,CHIP,365 OHM,1/10W,1% 1 R122
......3 102-4221 RES,CHIP,4.22K,1/10W,1%,SMD 3 R57, R28, R26
......3 102-4750 RES,CHIP,475 OHMS,1/10W,1%,SMD 1 R36
......3 102-4991 RES,CHIP,49.9 OHMS,1/10W,1%,SMD 3 R37, R102, R107
......3 102-4993 RES,CHIP,499K OHMS,1/10W,1%,SMD 1 R5
......3 102-5041 RES,4.99K OHM,1/10W,1% 1 R22
R95, R131, R141,
......3 102-5110 RES,CHIP,511 OHMS,1/10W,1%,SMD 4 R143
......3 102-5112 RES,CHIP,51.1 OHM,1/10W,1% 1 R156
......3 102-5622 RES, 5.62K OHM, 1%, 1/10W, SMD 1 R115
......3 102-6040 RES,604 OHM,1/10W,1% 2 R43, R149
......3 102-7521 RES,CHIP,75 OHMS,1/10W,1%,SMD 2 R109, R110
......3 102-8060 RES,CHIP,806 OHMS,1/10W,1%,SMD 1 R42
......3 104-0634 RES,CHIP,634 OHMS,1%,1/10W,0805,SMD 2 R90, R96
......3 104-1206 RES,CHIP,100 OHM,1%,1/4W,1206,SMD 1 R24
......3 105-0013 RES,CHIP,13 OHM,5%,1W,SMD 3 R46, R47, R55
R59, R117, R119,
R120, R121, R123,
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 8 R129, R150
DIODE, VARIABLE CAPACITANCE DUAL
......3 204-0242 DIODE VARACTOR (NOTE) 1 D23
D6, D7, D8, D9,
D10, D11, D12, D13,
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 10 D14, D15
......3 204-2800 DIODE,SCHOTTKY,HSMS-2800,SOT-23 4 D4, D5, D16, D17
......3 210-0093 TRANSISTOR,BFR93A,SOT-23,SMD 1 Q10
......3 210-0541 TSTR, NPN 90GHZ WIDEBAND, BFG541 1 Q2
TSTR, BIPOLAR POWER, NPN, NJT4031N,
......3 210-4031 SMD 1 Q1
REG, 5V, 1A, 3 TERMINAL, POSITIVE
......3 210-7805 VOLTAGE, SMD, D-PAK 1 U10
REG, 6V, .5A, 3 TERMINAL, POSITIVE
......3 210-7806 VOLTAGE, SMD, D-PAK 1 U11
OPAMP,OP262,RAIL TO RAIL, SMD, 15MHZ
......3 216-0262 BW, SOIC-8 1 U6

©2013 Broadcast Electronics - 107 -

 - 108 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 216-0310 TSTR,MMBFU310LT1,SMD 1 Q9
......3 216-0337 VR, LM337 NEGATIVE, SMD 1 U19
IC, LM393M, DUAL VOLTAGE COMPARATOR,
......3 216-0393 SMD 1 U2
LINEAR TECH LT1963 1.5 AMP LDO
......3 216-1963 ADJUSTABLE REGULATOR 1 U18
......3 216-2222 TSTR, MMBT2222A, NPN, SMD 1 Q6
......3 216-2564 IC, 64KBIT SPI SERIAL EEPROM, 25AA640A 1 U9
IC, HIGH-PERFORMANCE, 16-BIT DIGITAL
......3 216-3306 SIGNAL CONTROLLER 1 U7
IC, ANALOG VOLUME CONTROL, 8-CH, 5V,
......3 216-3308 LQFD-48, SMD 1 U3
......3 216-3904 TSTR,MMBT3904LT1,NPN,SMD 1 Q8
IC, ISOLATOR, DUAL CHANNEL DC/DC
......3 216-5242 CONVERTER,ADUM5242 2 U12, U13
......3 216-6002 IC, 3V LDO REGULATOR, SOT23 SMD 1 U14
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 4 Q3, Q4, Q5, Q7
......3 216-7125 IC, NC7SZ125M5 Single Tristate Buffer SOT23 1 U8
U1, U4, U15, U20,
......3 216-8676 IC, AD8676ARMZ, DUAL, R-R OP AMP, SMD 5 U21
......3 221-1105 MMIC,MSA-1105,17DBM,50 OHM 1 U17
......3 221-4110 RF PLL FREQUENCY SYNTHESIZER 1 U5
......3 224-2227 IC,LOW NOISE OP AMP,8 PIN,S0-8 2 U16, U24
DS1, DS2, DS3,
DS4, DS5, DS6,
......3 320-0603 LED GREEN SMD 9 DS7, DS8, DS9
......3 340-0004 SW,JUMPER PROGRAMMABLE 5 P2, P3, P5, P6, P10
......3 366-0002 INDUCTOR,2.2UH,200MA,+/-5% 1 L11
......3 366-0010-001 IND,10UH,1.5A 2 L1, L5
......3 366-0011 IND,10UH,SHIELDED,SMD 1 L6
......3 366-0043 IND,43NH,AIR,16MM,5%,SMD 1 L13
......3 366-0100-005 IND, 100NH, CER WW, 0805, 5%, SMD 1 L2
......3 366-0104 INDUCTOR, 100UH, 120MA, +/-5% 1 L10
......3 366-0180 IND,180NH LAMINATED CER,0805,SMD 1 L4
......3 366-0270 IND,270NH LAMINATED CER,0805,SMD 2 L3, L9
......3 366-1000 INDUCTOR,100uH,20%,SMD 2 L7, L8
XTAL, OSC, 19.456MHZ HCMOS, +/-25PPM,
......3 390-1945 7X5mm 1 Y2
......3 391-0010 OSC, TCXO, 10MHZ, SMD 1 Y1
EMI SHIELD, MODIFIED 50KE-CBSAFN-
......3 407-0500 .75x1.5x.50 2 CAN1, CAN2
......3 413-0603 Chip,Test Point 0603 SMD 1 TP1
......3 413-1597 TERM,TURRET,2 SHLDR,.219,GOLD FLASH 1 TP3
......3 417-0200 CONN,HEADER 20 PIN 3 J7, J8, J9
......3 417-0308 CONN,JACK,3-PIN,SMD 4 J5, J6, J10, J21
CONN, BNC RIGHT ANGLE DUAL PORT PCB
......3 417-3120 MOUNT/SHIELDED 3 J1, J3, J12
RECEPTACLE,XLR,3-PIN,FEMALE,RIGHT
......3 418-0060 ANGLE,PCB MOUNT 3 J14, J15, J16
......3 418-0255 CONN,MALE,4PIN 1 J17
CONN, SOCKET, 2X20 SURFACE MOUNT,
......3 418-2205 .050 PITCH, SFML LOCKING 1 J4

©2013 Broadcast Electronics

 - 109 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
CONN, 16 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5016 WITH LATCHES" 1 J2
......3 479-0175 SHIELD,1.5x1.75"x1.0",PC MOUNT" 1 CAN3
......3 519-4000 PCB, EXCITER, STX LP 1
....2 919-4030 ASSY, PCB, CONTROLLER, STX LP (SBCM) 1
......3 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 3 C24, C26, C27
C66, C67, C69, C94,
C95, C96, C120,
C121, C122, C123,
......3 007-0010 CHIP CERAMIC 10pF 50V 5% 0603 SMD 12 C124, C206
C145, C146, C153,
......3 007-0047-050 CAP, CER, 4.7UF, 10%, 50V, X7R, 1210, SMD 4 C154
C143, C144, C148,
......3 007-0100-035 CAP, LYTIC, 100UF, 35V, 20%, LOW IMP, SMD 4 C155
......3 007-1024-102 CAP, CER, 1000PF, 10%, 2000V, 1206, SMD 1 C11
C30, C31, C32, C33,
C34, C35, C36, C37,
C38, C39, C40, C72,
C76, C166, C167,
C168, C169, C170,
C171, C172, C173,
C174, C175, C176,
C177, C178, C179,
C180, C181, C182,
C183, C184, C185,
C186, C187, C188,
C189, C190, C191,
C192, C193, C194,
......3 007-1034-001 CAP,CER,.01UF,10%,50V,0603,SMD 45 C195, C196, C197
C46, C47, C48, C49,
C50, C51, C52, C53,
C54, C55, C56, C57,
C58, C59, C60, C61,
C62, C63, C64, C83,
C84, C89, C90, C91,
C92, C107, C108,
C113, C114, C134,
C135, C198, C199,
C200, C201, C202,
C203, C204, C210,
......3 007-1034-010 CAP,CER,0.01UF,10V,10%,0402 42 C211, C212, C213
C1, C2, C3, C4, C5,
C7, C8, C9, C10,
C12, C13, C14, C15,
C17, C18, C19, C20,
C21, C22, C23, C25,
C28, C41, C42, C43,
C44, C45, C65, C68,
C70, C73, C77, C79,
C80, C81, C82, C85,
C86, C87, C88, C93,
C97, C98, C99,
......3 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 104 C100, C101, C102,

©2013 Broadcast Electronics - 109 -

 - 110 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C103, C104, C105,
C106, C109, C110,
C111, C112, C115,
C116, C117, C118,
C119, C125, C126,
C127, C128, C129,
C130, C131, C132,
C133, C136, C137,
C138, C139, C160,
C161, C162, C163,
C164, C165, C205,
C207, C208, C209,
C214, C215, C216,
C217, C218, C219,
C220, C221, C222,
C223, C225, C226,
C227, C228, C229,
C230, C231, C232,
C233, C234, C235
......3 007-1054 CAP,CER,1uF,50V,10%,SMD 1 C29
......3 007-1054-001 CAP,CER,1UF,10%,10V,X7R,0805,SMD 2 C71, C75
C6, C16, C140,
C141, C142, C149,
C150, C151, C152,
C156, C157, C158,
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 13 C159
CAP, ULTRA HIGH LYTIC, .33F, 5V FOR
......3 013-0033 POWER BACKUP 1 C224
......3 064-2262 CAP,TANT,2.2uF,10V,SMD 2 C74, C78
......3 070-1064 CAP,TANT,10uF,35V,20%,SMD 1 C147
R28, R66, R118,
R120, R121, R126,
R127, R129, R130,
R233, R237, R239,
R241, R242, R250,
R253, R255, R256,
R259, R260, R263,
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 22 R264
R63, R64, R69, R72,
......3 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 7 R73, R76, R77
R3, R4, R19, R20,
R60, R261, R270,
R271, R272, R273,
R274, R275, R276,
R277, R278, R279,
R280, R281, R282,
R283, R284, R285,
R286, R287, R288,
R289, R290, R291,
R292, R293, R294,
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 32 R297
R5, R6, R7, R8,
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 35 R21, R22, R23, R24,

©2013 Broadcast Electronics

 - 111 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
R46, R47, R50, R52,
R56, R59, R62, R68,
R94, R116, R149,
R150, R154, R157,
R158, R182, R234,
R235, R244, R245,
R246, R247, R268,
R269, R295, R296,
R298
R117, R152, R153,
R155, R156, R159,
R183, R184, R186,
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 10 R187
......3 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 1 R123
R9, R10, R11, R13,
R25, R26, R27, R29,
R34, R40, R78, R79,
R148, R151, R166,
R167, R168, R169,
R170, R171, R172,
R173, R174, R175,
R176, R177, R178,
R179, R180, R181,
R206, R208, R214,
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 35 R219, R222
R42, R43, R44, R45,
R48, R49, R51, R55,
R57, R61, R65, R67,
R70, R74, R80, R82,
R83, R85, R86, R88,
R89, R91, R96, R98,
R100, R102, R104,
R106, R108, R110,
R112, R188, R189,
R190, R191, R192,
R193, R196, R198,
R199, R251, R257,
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 45 R265, R266, R267
......3 102-2151 RES, 2.15K, 1/10W, 1%, 0805 1 R204
......3 102-2201 RES,CHIP,22.1 OHM,1/10W,1% 1 R147
......3 102-2210 RES,CHIP,221 OHMS,1/10W,1%,SMD 1 R162
......3 102-2341 RES,2.32K OHM,1/10W,1% 1 R39
R30, R31, R32,
R114, R115, R124,
......3 102-2431 RES,CHIP,2.43K OHMS,1/10W,1%,SMD 9 R125, R238, R243
......3 102-2490 RES,CHIP,24.9 OHM,1/10W,1% 1 R185
......3 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 3 R211, R216, R218
R2, R18, R231,
......3 102-4991 RES,CHIP,49.9 OHMS,1/10W,1%,SMD 4 R232
......3 102-5491 RES,CHIP,5.49K,1/10W,1%,SMD 1 R209
......3 102-6040 RES,604 OHM,1/10W,1% 1 R221
......3 102-7503 RES,750 OHM,1/10W,1%,SMD 4 R35, R36, R37, R38
......3 102-9761 RES, CHIP, 9.76K OHMS, 1/8W, 1%, SMD 0805 1 R213

©2013 Broadcast Electronics - 111 -

 - 112 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
R1, R17, R33, R41,
R163, R165, R203,
......3 104-0000 RES,CHIP,0 OHM JUMPER,0603,SMD 10 R212, R229, R230
R161, R194, R195,
R200, R201, R202,
R205, R207, R210,
R215, R217, R220,
......3 104-1001 RES,CHIP,1.0 K OHM,1%,1/16W,0603,SMD 15 R223, R248, R249
......3 104-1002 RES,CHIP,10.0 K OHM,1%,1/16W,0603,SMD 1 R160
......3 104-4702 RES,CHIP,47.5Kohm,1%,1/16W,0603,SMD 1 R164
R132, R133, R134,
R135, R136, R137,
R138, R139, R140,
RES, NET, ISOLATED, 22 OHM, 5%, 1206, R141, R142, R143,
......3 199-0220 SMD 15 R144, R145, R146
TRANSIENT VOLTAGE SUPPRESSION
......3 201-0012-001 DIODE, 10v 1 D8
TRANSIENT VOLTAGE SUPPRESSION
......3 201-0012-002 DIODE, 6V 1 D9
......3 204-0316 DIODE, HIGH SPEED, SOD323, SMD 1 D7
D1, D2, D3, D4, D5,
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 6 D6
......3 216-0016 IC, ALTERA EPCS16 1 U25
......3 216-1326 IC,TRIPLE SUPPLY MONITORS,SOIC-8 1 U22
LINEAR TECH LT1963 1.5 AMP LDO
......3 216-1963 ADJUSTABLE REGULATOR 3 U42, U44, U45
IC, REAL-TIME CLOCK (RTC) WITH SERIAL
......3 216-2417 I/O, TSOC-6 1 U55
IC, 4M, 2.7-3.6V 16BIT SERIAL FLASH
......3 216-2541 MEMORY, JEDEC, SOIC-8 1 U24
......3 216-2860 MICROCHIP ENC28J60 SPI ETHERNET 1 U5
......3 216-3010 IC, ALTERA FPGA EP3C10F256 1 U19
......3 216-3904 TSTR,MMBT3904LT1,NPN,SMD 1 Q5
......3 216-5235 ANALOG DEVICES AD5235 DIGITAL POTS 3 U12, U18, U47
U26, U27, U29, U30,
U33, U34, U36, U37,
ADI DUAL CHANNEL ISOLATORS W/POWER U39, U40, U50, U51,
......3 216-5241 ADUM5241 14 U52, U53
......3 216-5328 ANALOG DEVICES AD5328 8 CHAN DAC 1 U7
IC, DUAL LVDS DIFFERENTIAL DRIVERS AND U1, U2, U3, U4,
......3 216-6549 RECEIVERS, TSSOP16 5 U56
Q1, Q2, Q3, Q4,
Q7, Q8, Q9, Q10,
Q11, Q12, Q13,
Q14, Q15, Q16,
Q17, Q18, Q19, Q20,
Q21, Q22, Q23,
Q24, Q25, Q26,
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 27 Q27, Q28, Q29
IC,SN74AHCT1G00DBV,2-INPUT POS
......3 216-7400 NAND,DBV,SMD 1 U14
......3 216-7408 IC, MC74VHC1G08, AND GATE, CMOS, SMT 1 U17
......3 216-7414-001 IC, SCHMITT TRIGGERED SINGLE GATE 13 U10, U13, U16, U46,

©2013 Broadcast Electronics

 - 113 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
INVERTER,SC-70 U54, U57, U58, U59,
U60, U61, U62, U63,
U64
......3 216-7490 ANALOG DEVICES AD7490 16 CHAN A/D 2 U6, U8
......3 216-8574 IC, ADI AD8574 4CHANNEL R/R OP AMP 1 U15
U28, U31, U32, U35,
......3 224-2045 IC,DUAL,BUS TRANSCEIVER,SSOP-DCT8 7 U38, U48, U49
......3 224-4000 GATE, SINGLE, XOR, 2 INPUT, 8NS TPD 1 U11
......3 224-4832 IC,128MB,SDRAM,166MHz,86-PIN,TSOP 1 U21
......3 227-0003 IC 3A PROGRAMMABLE DC-DC CONV SMT 2 U41, U43
IC,RS 232 TRANSCEIVER +3V TO +5V 1uA
......3 229-3221 SUPPLY-CURRENT 1 U23
......3 231-0136 IC,VOLT REF,2.5V,8-PIN SOIC 1 D10
DS1, DS2, DS5,
DS6, DS7, DS8,
DS9, DS10, DS11,
......3 320-0603 LED GREEN SMD 10 DS12
......3 325-0252 LED,RED/ORN,1206,SMD 1 DS4
......3 325-0255 LED,BLUE, 0603, SMD 1 DS3
......3 330-8055 FUSE, PTC RESETTABLE, .5A 6V, SMD 1 F2
FILTER, ISOLATION MODULE 10BASE-T,
......3 339-0420 SMD 1 T1
P1, P2, P3, P4, P5,
......3 340-0004 SW,JUMPER PROGRAMMABLE 7 P6, P7
......3 342-3304-001 SW,TACT,SPST,N.O.,SMD,RAISED 1 SW1
......3 360-0167 IND, .56 UH, 6A 2 L5, L8
......3 366-0011 IND,10UH,SHIELDED,SMD 3 L4, L6, L7
FERRITE, 600 OHMS, 1.5 AMP, 100MHz,1206
......3 366-3100 SMD 3 L1, L2, L3
......3 390-2500 XTAL,OSC,25MHz,+3.3VDC,50PPM 1 U20
......3 390-3276-006 XTAL, 32.768KHZ, 6PF, 20PPM, 8.7X3.7MM 1 Y1
......3 408-1000 HEADER,10-PIN,.100 CENTERS,DIP,note 2 J6, J12
TP1, TP2, TP3, TP4,
TP5, TP6, TP7, TP8,
TP9, TP10, TP11,
TP12, TP13, TP14,
TP15, TP16, TP17,
TP18, TP19, TP20,
TP21, TP22, TP23,
TP24, TP26, TP27,
TP28, TP29, TP30,
TP31, TP32, TP33,
TP34, TP35, TP37,
TP38, TP39, TP40,
......3 413-0603 Chip,Test Point 0603 SMD 39 TP41
......3 413-1597 TERM,TURRET,2 SHLDR,.219,GOLD FLASH 1 TP25
......3 417-0173 CONN,PCB,40-PIN,609-4037 1 J13
J4, J5, J9, J11, J15,
......3 417-0308 CONN,JACK,3-PIN,SMD 8 J17, J18, J19
......3 417-0700 CONN,PCB MT,2PIN 1 J14
......3 417-1517 CONN,HDR, 10-PIN SHROUDED PCB MT. 1 J16
......3 418-2884 CONN, JACK, GANGED MOD WITH LED 3 J1, J2, J3

©2013 Broadcast Electronics - 113 -

 - 114 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
CONN, 16 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5016 WITH LATCHES" 1 J10
CONN, 26 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5026 WITH LATCHES" 1 J7
CONN, 40 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5040 WITH LATCHES" 1 J8
......3 519-4030 PCB, CONTROLLER, STX LP 1
....2 919-4060-100 ASSY, PCB, LPF/COUPLER, STX LP (SBCM) 1
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 4 C4, C6, C23, C24
C2, C3, C7, C20, C21,
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 7 C22, C25
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C5, C19
......3 007-4703 CAP, CER, 47pF, 50V, 5%, SMD 1 C1
......3 007-5602-500 CAP,CER,56pF,50V,2%,SMD 1 C18
......3 040-3312-005 CAP,MICA,RF,33PF,500V,5%,SMT 1 C12
......3 046-0010-001 CAP,MICA,RF,10PF,500V,5%,SMT 2 C16, C17
......3 046-0015 CAP, MICA, RF, 15PF, 500V, 5%, SMT 2 C8, C9
C10, C11, C13, C14,
......3 046-0027-001 CAP,MICA,RF,27PF,500V,5%,SMT 5 C15
......3 101-0003 RES,THICK FILM,0 OHM,1/8W,5%,SMD 1 R35
......3 101-1500 RES,THICK FILM,150,1/8W,SMD 2 R14, R18
......3 101-3010 RES,CHIP,301 OHMS,1/8W,1%,SMD 2 R7, R8
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 2 R30, R31
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 4 R12, R16, R27, R32
......3 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 2 R9, R10
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 2 R15, R17
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R34
......3 102-3011 RES,CHIP,3.01K OHMS,1/10W,1%,SMD 1 R28
......3 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 2 R11, R13
......3 105-0036 RES, CHIP, 36 OHM, 1W, 5%, 2512 1 R21
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 1 R3
......3 105-0150 RES, CHIP, 150 OHM, 1W, 5%, 2512 2 R5, R6
......3 105-0200 RES, CHIP, 200 OHM, 1%, 1/2W, 2010, SMD 3 R22, R25, R26
......3 105-0430 RES, CHIP, 432 OHM, 1%, 1/2W, 2010, SMD 2 R23, R24
......3 105-1010 RES, CHIP, 100 OHM, 1W, 5%, 2512, SMD 2 R19, R20
......3 111-0082 RES ,82.5 OHM, 1W, 1%, 2512, SMD 2 R1, R4
......3 198-0101 TRMR,100 OHMS,TOP ADJUST,SMD 1 R2
......3 198-0502 TRMR,5K,TOP ADJUST,SMD 2 R29, R33
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 2 U3, U4
......3 221-8361 IC, TRUE AVERAGE POWER DETECTOR 2 U1, U2
......3 360-4202 COIL,10 GA,3T,88nH (SBCM) 4 L1, L2, L3, L4
........4 640-1001 WIRE, 10 GA, TIN PLATED 0.542
......3 360-4209 COIL,12 GA,8T,.375ID (SBCM)" 1 L7
........4 640-1200 WIRE,12GA,MAGNET 0.019
......3 366-0100 IND,100NH LAMINATED CER,0805,SMD 2 L5, L6
......3 407-0505 EMI SHIELD,LT-3334, .75 X 1.5 X .50 2
CONN, 10 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5010 WITH LATCHES" 1 J1
......3 519-4060 PCB, LPF, STX LP 1
......3 610-0017 CABLE,RF OUTPUT,LOW PASS FILTER,STX 1
......3 949-4103 CABLE,RG316,8.0L,417-1318,STRIP (SBCM) 1
........4 417-1318 CONN, BNC 50 OHM BULKHEAD TO RG-316 1

©2013 Broadcast Electronics

 - 115 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 621-1359 CBL,COAX,RG316/U,50 OHM 0.667
....2 919-4070 ASSY, PCB, DISPLAY, STXLP (SBCM) 1
C1, C2, C3, C4, C5,
C6, C7, C8, C9, C10,
C11, C12, C13, C14,
C15, C16, C17, C18,
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 21 C19, C20, C21
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 5 R2, R3, R4, R5, R6
......3 198-2004 TRMR,20K OHMS,TOP ADJ,SMD 1 R1
......3 320-1624 DISPLAY, CHARACTER LCD, 16X2 1 LCD1
DS1, DS2, DS3, DS4,
......3 325-0807 LED,DUAL,SUPER RED/GRN,SMD,0807 (note) 7 DS5, DS6, DS7
SW1, SW2, SW3,
......3 340-0206 SWITCH, MOM, DPDT, CHROME CAP 5 SW4, SW5
......3 417-0200 CONN,HEADER 20 PIN 1 J1
CONN, 40 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5040 WITH LATCHES" 1 J2
......3 440-0301 STANDOFF, 3/16 .060 SPACER" 4 HD1, HD2, HD3, HD4
......3 519-4070 BLANK, PCB, DISPLAY, STXLP 1
ASSY, PCB, STX LP, PS MOTHER BOARD
....2 919-4090-200 (TECTROL) 1
......3 007-1034 CAP,CER,0.01uF,50V,10%,SMD 3 C2, C3, C4
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 1 R1
......3 102-1691 RES,CHIP,1.69K OHMS,1/10W,1%,SMD 1 R3
......3 102-4221 RES,CHIP,4.22K,1/10W,1%,SMD 1 R4
......3 102-5041 RES,4.99K OHM,1/10W,1% 2 R2, R5
......3 105-1001 RES,CHIP,1K OHM,1%,1/4W,1210,SMD 1 R6
......3 204-2030 DIODE,SCHOTTKY,30V,1A,SMB 2 D1, D2
......3 210-5680 IC, MOSFET N-CH, 60V, 8A, SO-8 2 Q5, Q6
......3 216-0433 IC,OPTO PS2705-1,SMD 1 U2
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 4 Q1, Q2, Q3, Q4
......3 221-0555 IC,TIMER,NE555D 1 U1
......3 340-0004 SW,JUMPER PROGRAMMABLE 2 P7, P8
......3 408-0300 HEADER,3-PIN,.100 CENTERS,SIP,note 2 J7, J8
......3 417-0425 CONN,4-PIN,POWER-LOK 1 J3
......3 417-0426 CONN,6-PIN,PCB MT,MALE,POWER 1 J5
......3 417-0677 CONN,PCB MT,6PIN MALE 1 J2
......3 417-0700 CONN,PCB MT,2PIN 1 J4
......3 418-0900 CONN,9 PIN 640501-5 AMP 1 J6
CONN, RA, FEMALE, POWER, 47 PIN
......3 418-2901 POSITRONIC 1 J1
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black 2
.....3 500-211 Zinc (External)
PCB, MACH, STX LP, PS MOTHER BOARD
......3 519-4090-200 (TECTROL) 1
....2 949-0543 ASSY,CABLE,1PPS IN/OUT,FSi/ASi (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 1
......3 418-0034 PLUG,BNC DUAL CRIMP 1-227079-6 2
......3 621-1359 CBL,COAX,RG316/U,50 OHM 0.333
....2 949-4100 CABLE,40 RIB,5.25 LG,D MALE-HDR (SBCM) 1
CONN, 37 PIN, MALE, HDF,D-SUB,
......3 417-2819-001 W/THREADED INSERTS 1

©2013 Broadcast Electronics - 115 -

 - 116 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 418-4001 CONN,RIBBON CBL,40COND 1
......3 600-0040 CBL,40COND,28GA,100 ANSLEY 0.5
CABLE,12GA BLUE,6 LG,STRIP-PUSH ON
....2 949-4101-100 (SBCM) 1
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
......3 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 0.5
......3 611-3750 TUB,HT SHK,3/8 0.104
CABLE,12GA BROWN,6 LG,STRIP-PUSH ON
....2 949-4101-200 (SBCM) 1
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
......3 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 0.5
......3 611-3750 TUB,HT SHK,3/8 0.104
....2 949-4101-401 HARNESS,DC POWER TO PA,STX1K (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 3
......3 417-0372 CONTACT,CONN,FC112N2 12
......3 418-0426 CONN,6-PIN,FEMALE,POWER,CABLE 2
......3 601-1200 WIRE,AWG12 19/25 BLK 3.75
......3 601-1202 WIRE,AWG12 19/25 RED 3.75
HARNESS,AC INPUT TO SMALL PS's,STX1K
....2 949-4101-403 (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 2
......3 410-2478 CRIMP TERMINAL,AMP 640707-1 6
......3 417-0053 SKT,CONN 641294-1 AMP 2
......3 417-0306 HSNG,3 POS,SL-156 3
......3 418-0701 CONN,HOUSING,2 PIN 1
......3 601-2209 WIRE,AWG22,7/30 WHT 3.167
HARNESS,DC POWER TO CONTROLLER &
....2 949-4101-404 EXCITER,STX1K (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 4
......3 410-2478 CRIMP TERMINAL,AMP 640707-1 6
......3 417-0053 SKT,CONN 641294-1 AMP 6
......3 417-0606 HSNG,6 POS,SL-156 1
......3 418-0240 PLUG,FEM,4PIN 1
......3 418-0701 CONN,HOUSING,2 PIN 1
......3 601-2209 WIRE,AWG22,7/30 WHT 12.833
HARNESS,DC POWER,FAN,IPA,PS CONTROL
....2 949-4101-406 (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 1
......3 410-2478 CRIMP TERMINAL,AMP 640707-1 8
......3 417-0053 SKT,CONN 641294-1 AMP 17
......3 417-0059 CONN,9 PIN 1-640521-0 AMP 1
......3 417-0606 HSNG,6 POS,SL-156 1
......3 417-2816 PIN, CRIMP .100,22-24 GA" 8
......3 417-2820 CONN, 8 PIN, .100 LOCKING HOUSING" 1
......3 417-4025 HOUSING,4-PIN,AMP 640250-4 1
......3 418-0240 PLUG,FEM,4PIN 1
......3 418-0670 HOUSING,CONN,6PIN FEM 1
......3 601-2209 WIRE,AWG22,7/30 WHT 22.896
HARNESS, AC INPUT,STX WITH TECTROL
....2 949-4101-407 PS (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 1
......3 410-0015 LUG,TERM #8 RING CRIMP 12-10 2

©2013 Broadcast Electronics

 - 117 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 2
......3 417-0372 CONTACT,CONN,FC112N2 3
......3 417-0420 CONN, FEM, 4 POSITION, POWER-LOK, WIRE 1
......3 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 1.541
......3 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 1.541
......3 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 2.208
......3 611-3750 TUB,HT SHK,3/8 0.208
CABLE,RG316,20.0L,417-1318,417-
....2 949-4102 8030(SBCM) 1
......3 417-1318 CONN, BNC 50 OHM BULKHEAD TO RG-316 1
......3 417-8030 CONN,PLUG,RT ANG,SMA,HEX CRIMP 1
......3 621-1359 CBL,COAX,RG316/U,50 OHM 1.667
....2 959-4101 ASSY PA, COMB, HSINK, STX 1
PLATE,ALUM BACKER,LUMP COMBINER,STX
......3 471-4040 LP 1
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
......3 500-211 Zinc (External) 11
......3 919-4040 ASSY, PCB, COMBINER, STX LP 1
........4 046-0022 CAP,MICA,RF,22PF 4 C1, C5, C13, C11
C3, C6, C8, C9, C14,
........4 046-0022-001 CAP,MICA,RF,22PF,500V,5%,SMT 6 C16
........4 046-0024-001 CAP,MICA,RF,24PF,500V,5%,SMT 2 C4, C10
........4 131-1004 RES,100 OHM,5%,250W,FLANGED 2 R102, R112
........4 131-1123 RES,100 OHM,5%,400W,FLANGED 1 R110
CAPACITOR, UNCASED MICA 12PF 5%
........4 241-120 FWM602 4 C2, C12, C7, C15
COIL,10 GA,4T,95nH,CLOCKWISE WHILE
........4 360-4200 RECEDING (SBCM) 3 L3, L5, L6
..........5 640-1001 WIRE, 10 GA, TIN PLATED 0.667
COIL,10 GA,4T,95nH,COUNTER-CLOCKWISE
........4 360-4201 WHILE RECEDING (SBCM) 3 L1, L2, L4
..........5 640-1001 WIRE, 10 GA, TIN PLATED 0.667
........4 519-4040 PCB, COMBINER, STX LP 1
......3 959-4101-001 STX,PA SUB ASSMBLY,1KW 1
........4 210-2932 TSTR, RF POWER, SD2932 (note) 4 Q1, Q2, Q3, Q4
........4 210-8535 TSTR, RF POWER, PD85035C 1 Q8
........4 370-0069-001 ASSY COIL, STX PA (SBCM) 4 L16, L17, L19, 20
..........5 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.21
........4 420-4306 SCREW,4-40X.375,S.S. SHCS 10
........4 423-4001 #4 FLAT SS .250 X .125 X .018 8
........4 423-4002 #4 LOCK S.S. SPLIT 10
........4 455-4000-200 HEATSINK,WIDE,STX 1KW 1
PLATE,SPACER,PD85035C
........4 471-4224 TRANSISTOR,STX LP IPA 1
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
........4 500-211 Zinc (External) 16
........4 519-4055 PCB, SUB-BOARD, PA, STX LP 1
........4 594-0019 LABEL,DANGER HV 1X 1.5 1
LABEL,WARNING HIGH CURRENT",1" X
........4 594-0099 1.5",VINYL,ADHESIVE BACKED" 1
........4 919-4050 ASSY, PCB, PA, STX LP (SBCM) 1
..........5 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 2 C30, C211

©2013 Broadcast Electronics - 117 -

 - 118 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C167, C178, C207,
C209, C235, C236,
..........5 006-1006 CAP,47 uF,Electrolytic,63V,SMD (NOTE) 8 C237, C238
..........5 006-1075 CAP,LYTIC,10uF,50V,20%,SMD note 2 C37, C38
C64, C67, C74,
C122, C137, C140,
..........5 006-1075-350 CAP,LYTIC,10uF,35V,20%,NP,SMD 8 C190, C200
..........5 006-1085 CAP,ELECTRO,100 UF,10%,35V,SMD 2 C15, C21
..........5 007-0020-006 CAP,20pF,5%,50v,SMD,0603 1 C82
..........5 007-0100-035 CAP, LYTIC, 100UF, 35V, 20%, LOW IMP, SMD 2 C228, C229
..........5 007-0227 CAP,LYTIC,220UF,35V,SMT,LOW ESR 2 C231, C232
C3, C4, C7, C11,
C14, C22, C24, C33,
C34, C36, C40, C41,
C49, C50, C56, C69,
C70, C131, C150,
C154, C155, C161,
..........5 007-1024 CAP,CER,.001uF,50V,10%,SMD 23 C198
..........5 007-1034 CAP,CER,0.01uF,50V,10%,SMD 1 C45
C1, C2, C5, C6, C8,
C9, C10, C12, C13,
C18, C23, C25, C27,
C29, C31, C39, C43,
C44, C46, C48, C52,
C54, C55, C58, C61,
C63, C65, C66, C73,
C86, C109, C110,
C111, C114, C115,
C123, C124, C129,
C134, C135, C153,
C166, C168, C171,
C174, C175, C176,
..........5 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 54 C199, C206,
C26, C28, C32, C35,
..........5 007-1044-200 CAP, CHIP, .1UF, 200V, 20%, SMD 8 C47, C51, C59, C62
..........5 007-1054 CAP,CER,1uF,50V,10%,SMD 2 C17, C19
..........5 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 1 C113
..........5 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 1 C118
..........5 007-3912 CAP,CER,39pF,50V,5%,SMD 1 C117
..........5 007-3923 CAP,CER,390pF,100V,5%,SMD 1 C20
..........5 007-4724 CAP,CER,0.047uF,50V,10%,SMD 4 C42, C53, C57, C71
C98, C99, C188,
..........5 009-1013 CAP,CER CHIP,10PF,500V,5% 4 C193
C90, C93, C97, C169,
C170, C173, C186,
..........5 009-1023 CAP,CER CHIP,100PF,500V,5% 8 C187
C72, C77, C84, C85,
C88, C126, C133,
..........5 009-1032-050 CAP,CER CHIP,1000PF,50V,5% 9 C158, C159
C233, C234, C239,
C246, C247, C248,
..........5 009-1033 CAP,CER CHIP,1000PF,500V,5% 7 C249
..........5 009-1223 CAP,CER CHIP,120PF,300V,5% 1 C149

©2013 Broadcast Electronics

 - 119 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C212, C213, C216,
..........5 009-1813 CAP,CER CHIP,18 PF,5%,500V 6 C217, C226, C227
..........5 009-1823 CAP,CER CHIP,180PF,300V,5% 1 C138
..........5 009-2023 CAP,CER CHIP,200PF,300V,5% 2 C139, C177
C92, C95, C103,
C119, C183, C184,
..........5 009-2723 CAP,CER CHIP,270PF,300V,5% 8 C197, C201
..........5 009-3013 CAP,CER CHIP,30PF,500V,5% 1 C68
C79, C81, C94,
C162, C164, C165,
..........5 009-3913 CAP, CER CHIP, 39PF, 500V, 5% 9 C215, C240, C241
C75, C76, C78, C80,
C83, C87, C89, C91,
C96, C102, C106,
C128, C141, C142,
C144, C145, C146,
C147, C151, C152,
C156, C157, C160,
C163, C191, C220,
..........5 009-4723 CAP,CER CHIP,470PF,200V,5% 28 C224, C225
..........5 009-5613 CAP,CER CHIP,56PF,500V,5% 1 C148
C107, C120, C136,
..........5 009-6813 CAP,CER CHIP,68PF,500V,5% 5 C202, C203
C108, C127, C222,
..........5 009-8013 CAP,CER CHIP,82PF,500V,5% 4 C223
C242, C243, C244,
..........5 020-4785 CAP,LYTIC,470UF,100V,20%,STDUP 4 C245
C100, C112, C189,
..........5 046-1030 CAP,METAL FEED,1000PF,350V,10% 4 C192
CAP,TANT,22 MFD,20%,25V, E CASE,LOW
..........5 070-2265-L25 ESR,SMD 1 C16
C104, C105, C121,
C125, C204, C205,
..........5 090-0004 CAP,TRMR,CER,4-25PF,SMD,NPO 8 C214, C218
C101, C116, C194,
..........5 090-5010 CAP,TRIM,MONO CERAMIC,6-50pF,50V 4 C195
R56, R117, R126,
..........5 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R133, R155
R1, R6, R10, R11,
R17, R18, R54, R71,
R87, R102, R110,
..........5 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 13 R148, R268
R14, R26, R33, R37,
R44, R48, R62, R68,
R69, R79, R85, R99,
R118, R147, R153,
..........5 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 18 R198, R199, R222
R3, R8, R16, R22,
R24, R34, R38, R41,
R50, R51, R52, R55,
R59, R75, R76, R78,
R82, R88, R89, R92,
..........5 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 31 R100, R103, R111,

©2013 Broadcast Electronics - 119 -

 - 120 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
R116, R119, R138,
R175, R242, R243,
R245, R250
R27, R30, R39, R45,
R49, R64, R70, R86,
R105, R112, R190,
R191, R212, R221,
..........5 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 15 R224
..........5 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 1 R241
..........5 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 2 R5, R9
R25, R36, R43, R61,
..........5 102-1331 RES,CHIP,1.33K OHMS,1/10W,1%,SMD 5 R84
..........5 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R254
..........5 102-1501 RES,1.50K OHM,1/10W,1% 1 R13
..........5 102-1503 RES,CHIP,150K OHMS,1/10W,1%,SMD 3 R74, R104, R223
..........5 102-1553 RES,CHIP,15.0K OHMS,1/10W,1%,SMD 1 R247
..........5 102-2212 RES,CHIP,22.1K OHMS,1/10W,1%,SMD 2 R80, R200
..........5 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 2 R2, R12
..........5 102-2273 RES,CHIP,2.2M OHM,1/10 W,5% 1 R73
..........5 102-2430 RES,CHIP,243 OHMS,1/10W,1%,SMD, 0805 1 R63
..........5 102-2492 RES,CHIP,24.9K OHMS,1/10W,1%,SMD 4 R31, R46, R65, R90
R35, R53, R77,
..........5 102-2741 RES,CHIP,2.74K OHMS,1/10W,1%,SMD 4 R255
..........5 102-3001 RES,CHIP,30.1 OHMS,1/10W,1%,SMD 1 R156
..........5 102-3011 RES,CHIP,3.01K OHMS,1/10W,1%,SMD 1 R151
..........5 102-3162 RES,CHIP,31.6 K,1/10 W, 1% 4 R40, R58, R81, R95
R109, R113, R195,
R210, R217, R220,
..........5 102-3320 RES,CHIP,332 OHMS,1/10W,1%,SMD 7 R238
..........5 102-3323 RES,CHIP,332K OHMS,1/10W,1%,SMD 1 R211
..........5 102-4321 RES,CHIP,4.32K OHMS,1/10W,1%,SMD 2 R4, R7
..........5 102-4532 RES,CHIP,45.3K OHMS,1/10W,1%,SMD 1 R19
R93, R94, R120,
R122, R123, R124,
R127, R139, R140,
..........5 102-4992 RES,49.9K OHMS,1/10W,1%,SMD 10 R166
..........5 102-4993 RES,CHIP,499K OHMS,1/10W,1%,SMD 4 R42, R60, R83, R96
..........5 102-5041 RES,4.99K OHM,1/10W,1% 1 R20
R72, R192, R193,
..........5 102-5110 RES,CHIP,511 OHMS,1/10W,1%,SMD 6 R194, R196, R197
..........5 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 1 R152
..........5 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 1 R66
RES, CHIP, 8.66K OHM, 1/10W, 1% ,CR21-
..........5 102-8164 8661F-T 1 R23
..........5 102-8252 RES,82.5K OHM,1/10W,1% 1 R57
R177, R179, R181,
..........5 104-0000 RES,CHIP,0 OHM JUMPER,0603,SMD 6 R183, R185, R187
..........5 105-0003 RES .30 OHM 1/2W 1% 2010 SMD 1 R29
..........5 105-0010 RES, CHIP, 10 OHM, 1W, 1%, 2512 1 R129
..........5 105-0043 RES,CHIP,43 OHM,5%,1W,SMD 2 R164, R169
R21, R173, R174,
..........5 105-0102 RES, CHIP, 1K OHM, 1W, 5%, 2512 4 R270

©2013 Broadcast Electronics

 - 121 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..........5 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 1 R134
..........5 105-0430 RES, CHIP, 432 OHM, 1%, 1/2W, 2010, SMD 2 R135, R136
..........5 111-0006 RES .01 OHM 3W CURRENT SENSE, SMT 4 R28, R32, R47, R67
..........5 111-0040-003 RES .04 OHM 3W CURRENT SENSE, SMT 1 R15
R97, R98, R101,
R106, R107, R108,
R125, R128, R130,
R131, R132, R141,
R142, R143, R144,
R145, R146, R149,
R154, R158, R160,
R162, R163, R165,
..........5 111-2223 RES,CHIP,22 OHM,1W,5% 26 R168, R269
..........5 131-7031 RES,100 OHM,5%,10W,SMT 2 R157, R189
..........5 131-7031-020 RES, 100 OHM, 5%, 20W, SMT 1 R188
R91, R114, R115,
..........5 198-0503 TRMR,50K,TOP ADJUST,SMD 4 R137
..........5 198-1054 TRMR,10K OHMS,TOP ADJ,SMD (N) 2 R121, R159
SCHOTTKY BARRIER RECTIFIER 1 AMP 30V
..........5 204-0130 CASE 403A SMD 1 D10
D1, D2, D3, D5, D7,
D8, D11, D13, D14,
D15, D17, D18, D19,
D20, D21, D22, D23,
D25, D26, D27, D28,
D29, D30, D31, D32,
D33, D34, D36, D37,
D38, D39, D40, D41,
D42, D43, D44, D45,
D47, D50, D51, D53,
D54, D55, D56, D57,
D59, D61, D62, D63,
..........5 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 54 D67, D68, D69, D70
TSTR, MOSFET, P CHNL, 130MA, 50V, 10
..........5 210-0084 OHM, SMD 1 Q5
D48, D49, D52, D58,
..........5 210-1047 DIODE,ZENER,4.7V,225MW,SMD,SOT23 6 D64, D66
..........5 210-5500 TSTR, RF POWER, PD55003-E 1 Q12
U1, U3, U5, U7,
..........5 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 8 U12, U14, U22, U30
U6, U11, U15, U20,
..........5 216-1490 IC,OP AMP,LT1490,DUAL,R/R I/O,SMT 6 U26, U34
U4, U10, U18, U19,
..........5 216-2011 IC,CURRENT MONITOR,60V,G=10,SOT23-5 6 U21, U25
..........5 216-4013 IC,MC14013BD DUAL D FLIP FLOP,SMD 1 U17
Q6, Q7, Q9, Q10,
Q11, Q13, Q14,
..........5 216-7002 IC,MOSFET,2N7002LT1,SMD 10 Q16, Q17, Q20
..........5 216-7408 IC, MC74VHC1G08, AND GATE, CMOS, SMT 1 U23
..........5 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 2 U2, U8
IC, COMPARATOR, LMV7219, 7NS, 2.5-5V, R-
..........5 220-7425 R 3 U16, U24, U40
..........5 221-0072-A AMP,OP,LOW NOISE,SOIC8 1 U29

©2013 Broadcast Electronics - 121 -

 - 122 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..........5 221-8361 IC, TRUE AVERAGE POWER DETECTOR 1 U32
..........5 224-1491 IC,OP AMP,QUAD,RAIL TO RAIL,SMD 1 U27
..........5 227-1576 VR, LT1576IS8, SWITCHER, 1.5A, SMD 1 U9
..........5 231-3170 VR,LM317,SMD 1 U13
..........5 320-0603 LED GREEN SMD 3 DS7, DS10, DS12
DS1, DS2, DS6,
..........5 325-0252 LED,RED/ORN,1206,SMD 4 DS32
..........5 330-0009 FUSE,10A,2014,FAST-ACTING 1 F5
..........5 330-0062 FUSE, SMD, 20A, 125V 4 F1, F2, F3, F4
P1, P2, P3, P5, P6,
..........5 340-0004 SW,JUMPER PROGRAMMABLE 7 P9, P10
..........5 350-197 INDUCTOR, SMT, POWER, 1uH 2 L2, L3
..........5 350-200 INDUCTOR, SMT, 1812, 56NH 1 L26
..........5 350-202 IND, SMT, 1812, 39 NH 1 L38
..........5 360-0125 IND, 68 UH, 1.5A, SMD 1 L1
..........5 360-4203 COIL,16 GA,4T,47nH (SBCM) 1 L29
............6 601-0016 WIRE AWG16, BUSS 0.333
..........5 360-4204 COIL,16 GA,2T,18nH (SBCM) 1 L31
............6 601-0016 WIRE AWG16, BUSS 0.208
..........5 360-4205 COIL,16 GA,1T,5nH (SBCM) 1 L30
............6 601-0016 WIRE AWG16, BUSS 0.104
..........5 360-4208 WIRE,POWER DIST,PA,STX LP(SBCM) 1 W1
............6 640-1001 WIRE, 10 GA, TIN PLATED 0.792
..........5 366-0010-001 IND,10UH,1.5A 3 L6, L7, L27
L18, L21, L22, L24,
..........5 366-0022-001 IND, 22 NH, AIR, 16 MM, 5%, SMD 5 L39
..........5 366-0068-100 IND, 68NH, AIR, 5%, SMD, B10J 1 L15
..........5 366-0100 IND,100NH LAMINATED CER,0805,SMD 1 L23
..........5 366-0111 INDUCTOR,SMD,AIR CORE,10T,111NH,5% 1 L28
L32, L33, L34, L35,
..........5 366-0126 INDUCTOR,SMD,AIR CORE,11T,130nH 6 L36, L37
..........5 366-0130 INDUCTOR,POWER,SMD,1uH,10A 2 L25, L40
..........5 366-0380 IND,380NH,AIR CORE,SMT 1 L8
FERRITE,CHIP IMPEDANCE 1500OHMS @ L4, L5, L9, L10,
..........5 366-6152 100MHZ MULTILAYER, 0805 8 L11, L12, L13, L14
ASSY,FM-10S,XFMR,RF AMP OUTPUT
..........5 370-0062 (SBCM) 4 T1, T4, T7, T8
............6 463-0126 TUBING,COPPER,1/8X.014X1.530 4
............6 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.8
..........5 370-0063 ASSY,FM-10S,XFMR,RF AMP INPUT (SBCM) 4 T2, T3, T5, T6
............6 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.22
EMI SHIELD, MODIFIED 50KE-CBSAFN-
..........5 407-0501 2.5x3.25x.50 1
..........5 408-0300 HEADER,3-PIN,.100 CENTERS,SIP,note 1 J7
TP24, TP25, TP26,
TP27, TP28, TP29,
..........5 413-0603 Chip,Test Point 0603 SMD 7 TP30
TP1, TP2, TP3, TP4,
TP5, TP6, TP7, TP8,
TP9, TP10, TP11,
TP12, TP13, TP14,
..........5 413-1206 CHIP,TEST POINT,1206,SMD 23 TP15, TP16, TP17,

©2013 Broadcast Electronics

 - 123 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
TP18, TP19, TP20,
TP21, TP22, TP23
..........5 417-0426 CONN,6-PIN,PCB MT,MALE,POWER 1 J1
..........5 417-0701 CONN,SMA FEMALE PC MOUNT 1 J11
J3, J5, J6, J8, J9,
..........5 417-1041 HDR,4PIN,SINGLE ROW,SMT,0.1SP 6 J10
..........5 417-4568 CONN HEADER VERT 8POS .100 TIN 1 J4
Diode, SMT, Zener, 5.1V Motorola
..........5 418-451 BZX84C5V1LT1 1 D12
CONN, 10 PIN, MALE, SMT, 0.050, KEYED,
..........5 418-5010 WITH LATCHES" 2 J12, J13
CONN, 26 PIN, MALE, SMT, 0.050, KEYED,
..........5 418-5026 WITH LATCHES" 1 J2
..........5 463-0127 TUBING,COPPER,1/8X.014X1.300 4
..........5 519-4050 PCB, PA, STX LP 1
....2 959-4102-380 ASSY,FAN,STX WITH TECTROL PS 1
......3 380-6307 FINGER GUARD,FAN,4.125 CENTERS 2
FAN,LUGGED,AXIAL,12V,120MM X
......3 380-9007-001 38MM,3600RPM 2
........4 380-9007 FAN,12V,120MM X 38MM,3600RPM 1
........4 417-0036 PIN CONN,AMP,350967-1 2
......3 400-0207 STRIP,QUIET SHIELD,.250x.375"" 1.688
......3 418-0233 HSNG,CONN, 4P,1-640509-AMP 1
......3 420-6108 SCREW,6-32X.500,S.S. PH 8
......3 421-6008 6-32 KEP NUT 8
......3 471-4201-200 PANEL,FAN MOUNTING,STX LP 1

©2013 Broadcast Electronics - 123 -

 - 124 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 959-4112 ASSY,FM,STX LP,1KW,ADD ON UNIT
..1 400-0207 STRIP,QUIET SHIELD,.250x.375"" 7.083
..1 420-6606 SCREW,6-32X.375,S.S. PH FH UC 9
..1 421-6020 6-32 THUMB NUT 1
..1 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 3
..1 469-0366 FINGER STOCK (NOTE!!!!!) 0.111
..1 469-5500 FINGER STOCK,TECH-ETCH 250P37-16-02 0.833
..1 471-4205-100 COVER WELDMENT,STX LP,NEW PS 1
..1 471-4209-200 COVER,NEW PS,STX LP 1
SAFETY SHIELD FOR ELECTRICAL SOURCE
..1 471-4225 STX LP 1
..1 594-0019 LABEL,DANGER HV 1X 1.5 1
LABEL, WARNING-ONLY AUTHORIZED
..1 594-0505 PERSONNEL 1
ASSY,FM,STX LP,1KW,ADD ON UNIT,BASIC
..1 959-4112T TEST 1
....2 324-2500 LIGHTPIPE,0.197 DIA,0.5 LONG, PANEL MT. 4
....2 349-0020 SWITCH, ROCKER, DPST, 20A 1
....2 400-0207 STRIP,QUIET SHIELD,.250x.375"" 6
....2 409-0126 CARD GUIDE,4.5 LG 2
....2 411-7086 TERM BLK FEED-THRU 1-4MM GRAY 2
....2 411-7866 TERM BLK,FEED-THRU,1-4MM GRN/YEL 1
....2 420-4124 SCREW,4-40X1.500,S.S. PH 6
....2 420-6114 SCREW,6-32X.875,S.S. PH 4
....2 420-9720 RETAINER,NUT,OD:0.26,FITS SHAFT 5/32"" 4
....2 421-4008 4-40 KEP NUT 4
....2 421-6008 6-32 KEP NUT 3
SCREW,10-32 X 5/8,PPH,SEM,STEEL,ZINC
....2 422-0110 PLATING" 6
....2 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 8
....2 423-4002 #4 LOCK S.S. SPLIT 7
....2 423-6002 #6 LOCK SPLIT 4
....2 441-0184 STOFF,6-32,MALE-FEMALE,3/8 1
STOFF,SS,3/16 HEX X 1" LONG, MALE-
....2 441-4513 FEMALE 440" 1
....2 467-0001 EXTRUSION,RUBBER 0.063
....2 469-0022 FINGER STOCK,LAIRD 97-654,12 LONG" 2
....2 471-4200-300 WELDMENT,CHASSIS,STX 1KW,NEW PS 1
....2 471-4201-100 PLENUM, FAN, STX LP 1
FRONT PANEL, STX LP, ADD ON UNIT,
....2 471-4208 SCREENED 1
....2 471-4212 COVER,PA,STX LP 1
....2 471-4218-100 REAR FILLER PANEL,NEW PS STX PA 1
....2 471-4260-100 RETAINER,NEW PS,STX LP 1
....2 471-4262 SPACER PLATE,LPT,STX 1K 1
....2 471-4264 GUARD,STX NEW PS 1
HANDLE, 4 X 1.375", BRASS, CHROME
....2 486-7150 PLATED, #10-32 THREADS" 2
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
....2 500-211 Zinc (External) 8
....2 510-246 Flexible Grommet, (NOTE) 0.213
....2 540-0016-007 PWR SPLY,PFC 53VDC,2KW, TECTROL 1

©2013 Broadcast Electronics

 - 125 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
POWER SUPPLY, 12V 65W AC/DC
....2 540-1012-100 CONVERTER 2X4" STX LP" 1
....2 540-1012-501 POWER SUPPLY 12V 80/100W AC/DC 2X4IN 1
....2 594-0073 LABEL,WARNING ROTATING FANS 1
....2 594-0503 LABEL, DANGER-HAZARDOUS VOLTAGE 1
LABEL, WARNING-ONLY AUTHORIZED
....2 594-0505 PERSONNEL 1
....2 640-1001 WIRE, 10 GA, TIN PLATED 0.25
....2 700-0089 TAPE,POLYMER,3/4 (54FT ROLLS) 0.012
CBL,ASSY,.050 DOUBLE ROW 10 PIN
....2 849-2010 FEMALE IDC ASSEMBLY,2 INCH 1
CBL,ASSY,.050 DOUBLE ROW 10 PIN
....2 849-2010-100 FEMALE IDC ASSEMBLY,28 INCH 1
CBL,ASSY,.050 DOUBLE ROW 26 PIN
....2 849-2026 FEMALE IDC ASSY,3.63 INCH 1
ASSY, PCB, STX LP, ADDON PA,
....2 919-4035 CONTROLLER (SBCM) 1
......3 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 4 C31, C34, C35, C41
CAP, LYTIC, 100UF, 35V, 20%, LOW IMP,
......3 007-0100-035 SMD 2 C25, C26
C7, C8, C9, C10,
C12, C13, C14,
C15, C16, C17,
C18, C19, C20,
......3 007-1034-001 CAP,CER,.01UF,10%,50V,0603,SMD 16 C21, C22, C23
C1, C2, C3, C5,
C6, C11, C24, C27,
C28, C29, C30,
C32, C33, C36,
......3 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 17 C38, C40, C42
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C37, C39
R46, R47, R49,
R50, R57, R58,
R60, R61, R71,
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 12 R72, R74, R75
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 4 R2, R6, R31, R34
R10, R15, R18,
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 6 R55, R77, R78
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 1 R56
......3 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 1 R1
......3 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 1 R63
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 3 R25, R28, R64
R3, R4, R7, R8,
R11, R12, R14,
R20, R22, R24,
R27, R30, R33,
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 16 R36, R38, R40
R43, R44, R45,
R52, R53, R54,
......3 102-2431 RES,CHIP,2.43K OHMS,1/10W,1%,SMD 9 R66, R68, R69
......3 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 1 R70
......3 102-5491 RES,CHIP,5.49K,1/10W,1%,SMD 1 R65

©2013 Broadcast Electronics - 125 -

 - 126 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 104-0000 RES,CHIP,0 OHM JUMPER,0603,SMD 1 R42
......3 104-1001 RES,CHIP,1.0 K OHM,1%,1/16W,0603,SMD 1 R67
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 2 D1, D2
LINEAR TECH LT1963 1.5 AMP LDO
......3 216-1963 ADJUSTABLE REGULATOR 1 U12
......3 216-5235 ANALOG DEVICES AD5235 DIGITAL POTS 3 U5, U7, U14
IC, DUAL LVDS DIFFERENTIAL DRIVERS
......3 216-6549 AND RECEIVERS, TSSOP16 1 U1
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 4 Q1, Q2, Q3, Q4
IC,SN74AHCT1G00DBV,2-INPUT POS
......3 216-7400 NAND,DBV,SMD 1 U9
......3 216-7408 IC, MC74VHC1G08, AND GATE, CMOS, SMT 1 U13
IC, SCHMITT TRIGGERED SINGLE GATE U3, U4, U8, U11,
......3 216-7414-001 INVERTER,SC-70 5 U15
......3 216-7490 ANALOG DEVICES AD7490 16 CHAN A/D 1 U2
......3 216-8574 IC, ADI AD8574 4CHANNEL R/R OP AMP 1 U10
......3 224-4000 GATE, SINGLE, XOR, 2 INPUT, 8NS TPD 1 U6
......3 231-0136 IC,VOLT REF,2.5V,8-PIN SOIC 1 D3
......3 320-0603 LED GREEN SMD 1 DS1
......3 366-0011 IND,10UH,SHIELDED,SMD 1 L1
......3 413-0603 Chip,Test Point 0603 SMD 4 TP1, TP2, TP3, TP4
......3 413-1520 TERM,TURRET SINGLE, .109 L, .078" BASE" 1 TP5
CONN, PCB MOUNTED RJ45 RIGHT ANGLE
......3 417-4604 WITH LEDS 1 J1
CONN, 26 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5026 WITH LATCHES" 1 J2
......3 519-4035 PCB, STX LP, ADDON PA, CONTROLLER 1
....2 919-4060-100 ASSY, PCB, LPF/COUPLER, STX LP (SBCM) 1
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 4 C4, C6, C23, C24
C2, C3, C7, C20,
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 7 C21, C22, C25
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C5, C19
......3 007-4703 CAP, CER, 47pF, 50V, 5%, SMD 1 C1
......3 007-5602-500 CAP,CER,56pF,50V,2%,SMD 1 C18
......3 040-3312-005 CAP,MICA,RF,33PF,500V,5%,SMT 1 C12
......3 046-0010-001 CAP,MICA,RF,10PF,500V,5%,SMT 2 C16, C17
......3 046-0015 CAP, MICA, RF, 15PF, 500V, 5%, SMT 2 C8, C9
C10, C11, C13, C14,
......3 046-0027-001 CAP,MICA,RF,27PF,500V,5%,SMT 5 C15
......3 101-0003 RES,THICK FILM,0 OHM,1/8W,5%,SMD 1 R35
......3 101-1500 RES,THICK FILM,150,1/8W,SMD 2 R14, R18
......3 101-3010 RES,CHIP,301 OHMS,1/8W,1%,SMD 2 R7, R8
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 2 R30, R31
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 4 R12, R16, R27, R32
......3 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 2 R9, R10
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 2 R15, R17
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R34
......3 102-3011 RES,CHIP,3.01K OHMS,1/10W,1%,SMD 1 R28
......3 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 2 R11, R13
......3 105-0036 RES, CHIP, 36 OHM, 1W, 5%, 2512 1 R21
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 1 R3
......3 105-0150 RES, CHIP, 150 OHM, 1W, 5%, 2512 2 R5, R6

©2013 Broadcast Electronics

 - 127 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 105-0200 RES, CHIP, 200 OHM, 1%, 1/2W, 2010, SMD 3 R22, R25, R26
......3 105-0430 RES, CHIP, 432 OHM, 1%, 1/2W, 2010, SMD 2 R23, R24
......3 105-1010 RES, CHIP, 100 OHM, 1W, 5%, 2512, SMD 2 R19, R20
......3 111-0082 RES ,82.5 OHM, 1W, 1%, 2512, SMD 2 R1, R4
......3 198-0101 TRMR,100 OHMS,TOP ADJUST,SMD 1 R2
......3 198-0502 TRMR,5K,TOP ADJUST,SMD 2 R29, R33
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 2 U3, U4
......3 221-8361 IC, TRUE AVERAGE POWER DETECTOR 2 U1, U2
......3 360-4202 COIL,10 GA,3T,88nH (SBCM) 4 L1, L2, L3, L4
........4 640-1001 WIRE, 10 GA, TIN PLATED 0.542
......3 360-4209 COIL,12 GA,8T,.375ID (SBCM)" 1 L7
........4 640-1200 WIRE,12GA,MAGNET 0.019
......3 366-0100 IND,100NH LAMINATED CER,0805,SMD 2 L5, L6
......3 407-0505 EMI SHIELD,LT-3334, .75 X 1.5 X .50 2
CONN, 10 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5010 WITH LATCHES" 1 J1
......3 519-4060 PCB, LPF, STX LP 1
......3 610-0017 CABLE,RF OUTPUT,LOW PASS FILTER,STX 1
......3 949-4103 CABLE,RG316,8.0L,417-1318,STRIP (SBCM) 1
........4 417-1318 CONN, BNC 50 OHM BULKHEAD TO RG-316 1
........4 621-1359 CBL,COAX,RG316/U,50 OHM 0.667
ASSY, STX LP PA/COMBINER LED BOARD
....2 919-4075 (SBCM) 1
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 4 C2, C3, C6, C9
......3 007-3923 CAP,CER,390pF,100V,5%,SMD 2 C4, C8
......3 007-4702-500 CAP,CER,47pF,50V,2%,SMD 2 C5, C7
......3 070-1065 CAP,TANT,10UF,20V,10%,SMD 1 C1
R21, R24, R25, R26,
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R27
......3 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 1 R22
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 2 R18, R20
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 2 R23, R30
......3 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 4 R6, R11, R13, R16
......3 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 1 R3
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R29
......3 102-2210 RES,CHIP,221 OHMS,1/10W,1%,SMD 1 R2
......3 102-4021 RES,CHIP,4.02K OHMS,1/10W,1%,SMD 1 R19
R4, R7, R8, R9, R10,
......3 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 9 R12, R14, R15, R17
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 5 Q1, Q2, Q3, Q4, Q5
......3 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 1 U3
......3 221-0358-001 DUAL OP AMP, SMD, SOIC8 1 U2
......3 231-3170 VR,LM317,SMD 1 U1
LED,DUAL,SUPER RED/GRN,SMD,0807 DS1, DS2, DS3, DS4,
......3 325-0807 (note) 5 DS5
......3 340-0004 SW,JUMPER PROGRAMMABLE 1 P1
......3 417-0308 CONN,JACK,3-PIN,SMD 1 J2
Diode, SMT, Zener, 5.1V Motorola
......3 418-451 BZX84C5V1LT1 1 D1
CONN, 10 PIN, MALE, SMT, 0.050, KEYED,
......3 418-5010 WITH LATCHES" 1 J1
......3 519-4075 PCB, STX LP PA/COMBINER LED BOARD 1

©2013 Broadcast Electronics - 127 -

 - 128 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
ASSY, PCB, STX LP, PS MOTHER BOARD
....2 919-4090-200 (TECTROL) 1
......3 007-1034 CAP,CER,0.01uF,50V,10%,SMD 3 C2, C3, C4
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 1 R1
......3 102-1691 RES,CHIP,1.69K OHMS,1/10W,1%,SMD 1 R4
......3 102-4221 RES,CHIP,4.22K,1/10W,1%,SMD 1 R3
......3 102-5041 RES,4.99K OHM,1/10W,1% 2 R2, R5
......3 105-1001 RES,CHIP,1K OHM,1%,1/4W,1210,SMD 1 R6
......3 204-2030 DIODE,SCHOTTKY,30V,1A,SMB 2 D1, D2
......3 210-5680 IC, MOSFET N-CH, 60V, 8A, SO-8 2 Q5, Q6
......3 216-0433 IC,OPTO PS2705-1,SMD 1 U2
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 4 Q1, Q2, Q3, Q4
......3 229-0555 IC,TIMER,NE555N 1 U1
......3 340-0004 SW,JUMPER PROGRAMMABLE 2 P7, P8
......3 408-0300 HEADER,3-PIN,.100 CENTERS,SIP,note 2 J7, J8
......3 417-0425 CONN,4-PIN,POWER-LOK 1 J3
......3 417-0426 CONN,6-PIN,PCB MT,MALE,POWER 1 J5
......3 417-0677 CONN,PCB MT,6PIN MALE 1 J2
......3 417-0700 CONN,PCB MT,2PIN 1 J4
......3 418-0900 CONN,9 PIN 640501-5 AMP 1 J6
CONN, RA, FEMALE, POWER, 47 PIN
......3 418-2901 POSITRONIC 1 J1
PCB, MACH, STX LP, PS MOTHER BOARD
......3 519-4090-200 (TECTROL) 1
CABLE,12GA BLUE,6 LG,STRIP-PUSH ON
....2 949-4101-100 (SBCM) 1
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
......3 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 0.5
......3 611-3750 TUB,HT SHK,3/8 0.104
CABLE,12GA BROWN,6 LG,STRIP-PUSH ON
....2 949-4101-200 (SBCM) 1
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
......3 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 0.5
......3 611-3750 TUB,HT SHK,3/8 0.104
....2 949-4101-401 HARNESS,DC POWER TO PA,STX1K (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 3
......3 417-0372 CONTACT,CONN,FC112N2 12
......3 418-0426 CONN,6-PIN,FEMALE,POWER,CABLE 2
......3 601-1200 WIRE,AWG12 19/25 BLK 3.75
......3 601-1202 WIRE,AWG12 19/25 RED 3.75
HARNESS,AC INPUT TO SMALL PS's,STX1K
....2 949-4101-403 (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 2
......3 410-2478 CRIMP TERMINAL,AMP 640707-1 6
......3 417-0053 SKT,CONN 641294-1 AMP 2
......3 417-0306 HSNG,3 POS,SL-156 3
......3 418-0701 CONN,HOUSING,2 PIN 1
......3 601-2209 WIRE,AWG22,7/30 WHT 3.167
HARNESS,DC POWER,FAN,IPA,PS
....2 949-4101-406 CONTROL (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 1
......3 410-2478 CRIMP TERMINAL,AMP 640707-1 8

©2013 Broadcast Electronics

 - 129 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 417-0053 SKT,CONN 641294-1 AMP 17
......3 417-0059 CONN,9 PIN 1-640521-0 AMP 1
......3 417-0606 HSNG,6 POS,SL-156 1
......3 417-2816 PIN, CRIMP .100,22-24 GA" 8
......3 417-2820 CONN, 8 PIN, .100 LOCKING HOUSING" 1
......3 417-4025 HOUSING,4-PIN,AMP 640250-4 1
......3 418-0240 PLUG,FEM,4PIN 1
......3 418-0670 HOUSING,CONN,6PIN FEM 1
......3 601-2209 WIRE,AWG22,7/30 WHT 22.896
HARNESS, AC INPUT,STX WITH TECTROL
....2 949-4101-407 PS (SBCM) 1
......3 402-0051 TY-RAP, W/FLAG 1
......3 410-0015 LUG,TERM #8 RING CRIMP 12-10 2
......3 410-0050 LUG,TERM,10-12GA,FEMSPADE 2
......3 417-0372 CONTACT,CONN,FC112N2 3
CONN, FEM, 4 POSITION, POWER-LOK,
......3 417-0420 WIRE 1
......3 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 1.541
......3 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 1.541
......3 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 2.208
......3 611-3750 TUB,HT SHK,3/8 0.208
CABLE,RG316,20.0L,417-1318,417-
....2 949-4102 8030(SBCM) 1
......3 417-1318 CONN, BNC 50 OHM BULKHEAD TO RG-316 1
......3 417-8030 CONN,PLUG,RT ANG,SMA,HEX CRIMP 1
......3 621-1359 CBL,COAX,RG316/U,50 OHM 1.667
....2 959-4101 ASSY PA, COMB, HSINK, STX 1
PLATE,ALUM BACKER,LUMP
......3 471-4040 COMBINER,STX LP 1
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
......3 500-211 Zinc (External) 11
......3 919-4040 ASSY, PCB, COMBINER, STX LP 1
........4 046-0022 CAP,MICA,RF,22PF 4 C1, C5, C13, C11
C3, C6, C8, C9, C14,
........4 046-0022-001 CAP,MICA,RF,22PF,500V,5%,SMT 6 C16
........4 046-0024-001 CAP,MICA,RF,24PF,500V,5%,SMT 2 C4, C10
........4 131-1004 RES,100 OHM,5%,250W,FLANGED 2 R102, R112
........4 131-1123 RES,100 OHM,5%,400W,FLANGED 1 R110
CAPACITOR, UNCASED MICA 12PF 5%
........4 241-120 FWM602 4 C2, C12, C7, C15
COIL,10 GA,4T,95nH,CLOCKWISE WHILE
........4 360-4200 RECEDING (SBCM) 3 L3, L5, L6
..........5 640-1001 WIRE, 10 GA, TIN PLATED 0.667
COIL,10 GA,4T,95nH,COUNTER-CLOCKWISE
........4 360-4201 WHILE RECEDING (SBCM) 3 L1, L2, L4
..........5 640-1001 WIRE, 10 GA, TIN PLATED 0.667
........4 519-4040 PCB, COMBINER, STX LP 1
......3 959-4101-001 STX,PA SUB ASSMBLY,1KW 1
........4 210-2932 TSTR, RF POWER, SD2932 (note) 4 Q1, Q2, Q3, Q4
........4 210-8535 TSTR, RF POWER, PD85035C 1 Q8
........4 370-0069-001 ASSY COIL, STX PA (SBCM) 4 L16, L17, L19, 20
..........5 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.21

©2013 Broadcast Electronics - 129 -

 - 130 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 420-4306 SCREW,4-40X.375,S.S. SHCS 10
........4 423-4001 #4 FLAT SS .250 X .125 X .018 8
........4 423-4002 #4 LOCK S.S. SPLIT 10
........4 455-4000-200 HEATSINK,WIDE,STX 1KW 1
PLATE,SPACER,PD85035C
........4 471-4224 TRANSISTOR,STX LP IPA 1
Screw,SEMS 4-40x3/8 Ph Pan Head MS Black
........4 500-211 Zinc (External) 16
........4 519-4055 PCB, SUB-BOARD, PA, STX LP 1
........4 594-0019 LABEL,DANGER HV 1X 1.5 1
LABEL,WARNING HIGH CURRENT",1" X
........4 594-0099 1.5",VINYL,ADHESIVE BACKED" 1
........4 919-4050 ASSY, PCB, PA, STX LP (SBCM) 1
..........5 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 2 C30, C211
C167, C178, C207,
C209, C235, C236,
..........5 006-1006 CAP,47 uF,Electrolytic,63V,SMD (NOTE) 8 C237, C238
..........5 006-1075 CAP,LYTIC,10uF,50V,20%,SMD note 2 C37, C38
C64, C67, C74,
C122, C137, C140,
..........5 006-1075-350 CAP,LYTIC,10uF,35V,20%,NP,SMD 8 C190, C200
..........5 006-1085 CAP,ELECTRO,100 UF,10%,35V,SMD 2 C15, C21
..........5 007-0020-006 CAP,20pF,5%,50v,SMD,0603 1 C82
CAP, LYTIC, 100UF, 35V, 20%, LOW IMP,
..........5 007-0100-035 SMD 2 C228, C229
..........5 007-0227 CAP,LYTIC,220UF,35V,SMT,LOW ESR 2 C231, C232
C3, C4, C7, C11,
C14, C22, C24,
C33, C34, C36,
C40, C41, C49,
C50, C56, C69,
C70, C131, C150,
C154, C155, C161,
..........5 007-1024 CAP,CER,.001uF,50V,10%,SMD 23 C198
..........5 007-1034 CAP,CER,0.01uF,50V,10%,SMD 1 C45
C1, C2, C5, C6,
C8, C9, C10, C12,
C13, C18, C23,
C25, C27, C29,
C31, C39, C43,
C44, C46, C48,
C52, C54, C55,
C58, C61, C63,
C65, C66, C73,
C86, C109, C110,
C111, C114, C115,
C123, C124, C129,
C134, C135, C153,
C166, C168, C171,
C174, C175, C176,
..........5 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 54 C199, C206,

©2013 Broadcast Electronics

 - 131 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C26, C28, C32,
C35, C47, C51,
..........5 007-1044-200 CAP, CHIP, .1UF, 200V, 20%, SMD 8 C59, C62
..........5 007-1054 CAP,CER,1uF,50V,10%,SMD 2 C17, C19
..........5 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 1 C113
..........5 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 1 C118
..........5 007-3912 CAP,CER,39pF,50V,5%,SMD 1 C117
..........5 007-3923 CAP,CER,390pF,100V,5%,SMD 1 C20
..........5 007-4724 CAP,CER,0.047uF,50V,10%,SMD 4 C42, C53, C57, C71
C98, C99, C188,
..........5 009-1013 CAP,CER CHIP,10PF,500V,5% 4 C193
C90, C93, C97, C169,
C170, C173, C186,
..........5 009-1023 CAP,CER CHIP,100PF,500V,5% 8 C187
C72, C77, C84,
C85, C88, C126,
..........5 009-1032-050 CAP,CER CHIP,1000PF,50V,5% 9 C133, C158, C159
C233, C234, C239,
C246, C247, C248,
..........5 009-1033 CAP,CER CHIP,1000PF,500V,5% 7 C249
..........5 009-1223 CAP,CER CHIP,120PF,300V,5% 1 C149
C212, C213, C216,
..........5 009-1813 CAP,CER CHIP,18 PF,5%,500V 6 C217, C226, C227
..........5 009-1823 CAP,CER CHIP,180PF,300V,5% 1 C138
..........5 009-2023 CAP,CER CHIP,200PF,300V,5% 2 C139, C177
C92, C95, C103,
C119, C183, C184,
..........5 009-2723 CAP,CER CHIP,270PF,300V,5% 8 C197, C201
..........5 009-3013 CAP,CER CHIP,30PF,500V,5% 1 C68
C79, C81, C94,
C162, C164, C165,
..........5 009-3913 CAP, CER CHIP, 39PF, 500V, 5% 9 C215, C240, C241
C75, C76, C78,
C80, C83, C87,
C89, C91, C96,
C102, C106, C128,
C141, C142, C144,
C145, C146, C147,
C151, C152, C156,
C157, C160, C163,
C191, C220, C224,
..........5 009-4723 CAP,CER CHIP,470PF,200V,5% 28 C225
..........5 009-5613 CAP,CER CHIP,56PF,500V,5% 1 C148
C107, C120, C136,
..........5 009-6813 CAP,CER CHIP,68PF,500V,5% 5 C202, C203
C108, C127, C222,
..........5 009-8013 CAP,CER CHIP,82PF,500V,5% 4 C223
C242, C243, C244,
..........5 020-4785 CAP,LYTIC,470UF,100V,20%,STDUP 4 C245
C100, C112, C189,
..........5 046-1030 CAP,METAL FEED,1000PF,350V,10% 4 C192
CAP,TANT,22 MFD,20%,25V, E CASE,LOW
..........5 070-2265-L25 ESR,SMD 1 C16
©2013 Broadcast Electronics - 131 -
 - 132 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
C104, C105, C121,
C125, C204, C205,
..........5 090-0004 CAP,TRMR,CER,4-25PF,SMD,NPO 8 C214, C218
C101, C116, C194,
..........5 090-5010 CAP,TRIM,MONO CERAMIC,6-50pF,50V 4 C195
R56, R117, R126,
..........5 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R133, R155
R1, R6, R10, R11,
R17, R18, R54,
R71, R87, R102,
..........5 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 13 R110, R148, R268
R14, R26, R33, R37,
R44, R48, R62, R68,
R69, R79, R85, R99,
R118, R147, R153,
..........5 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 18 R198, R199, R222
R3, R8, R16, R22,
R24, R34, R38,
R41, R50, R51,
R52, R55, R59,
R75, R76, R78,
R82, R88, R89,
R92, R100, R103,
R111, R116, R119,
R138, R175, R242,
..........5 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 31 R243, R245, R250
R27, R30, R39, R45,
R49, R64, R70, R86,
R105, R112, R190,
R191, R212, R221,
..........5 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 15 R224
..........5 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 1 R241
..........5 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 2 R5, R9
R25, R36, R43,
..........5 102-1331 RES,CHIP,1.33K OHMS,1/10W,1%,SMD 5 R61, R84
..........5 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R254
..........5 102-1501 RES,1.50K OHM,1/10W,1% 1 R13
..........5 102-1503 RES,CHIP,150K OHMS,1/10W,1%,SMD 3 R74, R104, R223
..........5 102-1553 RES,CHIP,15.0K OHMS,1/10W,1%,SMD 1 R247
..........5 102-2212 RES,CHIP,22.1K OHMS,1/10W,1%,SMD 2 R80, R200
..........5 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 2 R2, R12
..........5 102-2273 RES,CHIP,2.2M OHM,1/10 W,5% 1 R73
..........5 102-2430 RES,CHIP,243 OHMS,1/10W,1%,SMD, 0805 1 R63
..........5 102-2492 RES,CHIP,24.9K OHMS,1/10W,1%,SMD 4 R31, R46, R65, R90
R35, R53, R77,
..........5 102-2741 RES,CHIP,2.74K OHMS,1/10W,1%,SMD 4 R255
..........5 102-3001 RES,CHIP,30.1 OHMS,1/10W,1%,SMD 1 R156
..........5 102-3011 RES,CHIP,3.01K OHMS,1/10W,1%,SMD 1 R151
..........5 102-3162 RES,CHIP,31.6 K,1/10 W, 1% 4 R40, R58, R81, R95
R109, R113, R195,
R210, R217, R220,
..........5 102-3320 RES,CHIP,332 OHMS,1/10W,1%,SMD 7 R238
..........5 102-3323 RES,CHIP,332K OHMS,1/10W,1%,SMD 1 R211

©2013 Broadcast Electronics

 - 133 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..........5 102-4321 RES,CHIP,4.32K OHMS,1/10W,1%,SMD 2 R4, R7
..........5 102-4532 RES,CHIP,45.3K OHMS,1/10W,1%,SMD 1 R19
R93, R94, R120,
R122, R123, R124,
R127, R139, R140,
..........5 102-4992 RES,49.9K OHMS,1/10W,1%,SMD 10 R166
..........5 102-4993 RES,CHIP,499K OHMS,1/10W,1%,SMD 4 R42, R60, R83, R96
..........5 102-5041 RES,4.99K OHM,1/10W,1% 1 R20
R72, R192, R193,
..........5 102-5110 RES,CHIP,511 OHMS,1/10W,1%,SMD 6 R194, R196, R197
..........5 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 1 R152
..........5 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 1 R66
RES, CHIP, 8.66K OHM, 1/10W, 1% ,CR21-
..........5 102-8164 8661F-T 1 R23
..........5 102-8252 RES,82.5K OHM,1/10W,1% 1 R57
R177, R179, R181,
..........5 104-0000 RES,CHIP,0 OHM JUMPER,0603,SMD 6 R183, R185, R187
..........5 105-0003 RES .30 OHM 1/2W 1% 2010 SMD 1 R29
..........5 105-0010 RES, CHIP, 10 OHM, 1W, 1%, 2512 1 R129
..........5 105-0043 RES,CHIP,43 OHM,5%,1W,SMD 2 R164, R169
R21, R173, R174,
..........5 105-0102 RES, CHIP, 1K OHM, 1W, 5%, 2512 4 R270
..........5 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 1 R134
..........5 105-0430 RES, CHIP, 432 OHM, 1%, 1/2W, 2010, SMD 2 R135, R136
..........5 111-0006 RES .01 OHM 3W CURRENT SENSE, SMT 4 R28, R32, R47, R67
..........5 111-0040-003 RES .04 OHM 3W CURRENT SENSE, SMT 1 R15
R97, R98, R101,
R106, R107, R108,
R125, R128, R130,
R131, R132, R141,
R142, R143, R144,
R145, R146, R149,
R154, R158, R160,
R162, R163, R165,
..........5 111-2223 RES,CHIP,22 OHM,1W,5% 26 R168, R269
..........5 131-7031 RES,100 OHM,5%,10W,SMT 2 R157, R189
..........5 131-7031-020 RES, 100 OHM, 5%, 20W, SMT 1 R188
R91, R114, R115,
..........5 198-0503 TRMR,50K,TOP ADJUST,SMD 4 R137
..........5 198-1054 TRMR,10K OHMS,TOP ADJ,SMD (N) 2 R121, R159
SCHOTTKY BARRIER RECTIFIER 1 AMP 30V
..........5 204-0130 CASE 403A SMD 1 D10

©2013 Broadcast Electronics - 133 -

 - 134 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
D1, D2, D3, D5,
D7, D8, D11, D13,
D14, D15, D17,
D18, D19, D20,
D21, D22, D23,
D25, D26, D27,
D28, D29, D30,
D31, D32, D33,
D34, D36, D37,
D38, D39, D40,
D41, D42, D43,
D44, D45, D47,
D50, D51, D53,
D54, D55, D56,
D57, D59, D61,
D62, D63, D67,
..........5 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 54 D68, D69, D70
TSTR, MOSFET, P CHNL, 130MA, 50V, 10
..........5 210-0084 OHM, SMD 1 Q5
D48, D49, D52,
..........5 210-1047 DIODE,ZENER,4.7V,225MW,SMD,SOT23 6 D58, D64, D66
..........5 210-5500 TSTR, RF POWER, PD55003-E 1 Q12
U1, U3, U5, U7,
U12, U14, U22,
..........5 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 8 U30
U6, U11, U15, U20,
..........5 216-1490 IC,OP AMP,LT1490,DUAL,R/R I/O,SMT 6 U26, U34
U4, U10, U18, U19,
..........5 216-2011 IC,CURRENT MONITOR,60V,G=10,SOT23-5 6 U21, U25
..........5 216-4013 IC,MC14013BD DUAL D FLIP FLOP,SMD 1 U17
Q6, Q7, Q9, Q10,
Q11, Q13, Q14,
..........5 216-7002 IC,MOSFET,2N7002LT1,SMD 10 Q16, Q17, Q20
..........5 216-7408 IC, MC74VHC1G08, AND GATE, CMOS, SMT 1 U23
..........5 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 2 U2, U8
IC, COMPARATOR, LMV7219, 7NS, 2.5-5V, R-
..........5 220-7425 R 3 U16, U24, U40
..........5 221-0072-A AMP,OP,LOW NOISE,SOIC8 1 U29
..........5 221-8361 IC, TRUE AVERAGE POWER DETECTOR 1 U32
..........5 224-1491 IC,OP AMP,QUAD,RAIL TO RAIL,SMD 1 U27
..........5 227-1576 VR, LT1576IS8, SWITCHER, 1.5A, SMD 1 U9
..........5 231-3170 VR,LM317,SMD 1 U13
..........5 320-0603 LED GREEN SMD 3 DS7, DS10, DS12
DS1, DS2, DS6,
..........5 325-0252 LED,RED/ORN,1206,SMD 4 DS32
..........5 330-0009 FUSE,10A,2014,FAST-ACTING 1 F5
..........5 330-0062 FUSE, SMD, 20A, 125V 4 F1, F2, F3, F4
P1, P2, P3, P5, P6,
..........5 340-0004 SW,JUMPER PROGRAMMABLE 7 P9, P10
..........5 350-197 INDUCTOR, SMT, POWER, 1uH 2 L2, L3
..........5 350-200 INDUCTOR, SMT, 1812, 56NH 1 L26
..........5 350-202 IND, SMT, 1812, 39 NH 1 L38
..........5 360-0125 IND, 68 UH, 1.5A, SMD 1 L1

©2013 Broadcast Electronics

 - 135 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..........5 360-4203 COIL,16 GA,4T,47nH (SBCM) 1 L29
............6 601-0016 WIRE AWG16, BUSS 0.333
..........5 360-4204 COIL,16 GA,2T,18nH (SBCM) 1 L31
............6 601-0016 WIRE AWG16, BUSS 0.208
..........5 360-4205 COIL,16 GA,1T,5nH (SBCM) 1 L30
............6 601-0016 WIRE AWG16, BUSS 0.104
..........5 360-4208 WIRE,POWER DIST,PA,STX LP(SBCM) 1 W1
............6 640-1001 WIRE, 10 GA, TIN PLATED 0.792
..........5 366-0010-001 IND,10UH,1.5A 3 L6, L7, L27
L18, L21, L22, L24,
..........5 366-0022-001 IND, 22 NH, AIR, 16 MM, 5%, SMD 5 L39
..........5 366-0068-100 IND, 68NH, AIR, 5%, SMD, B10J 1 L15
..........5 366-0100 IND,100NH LAMINATED CER,0805,SMD 1 L23
..........5 366-0111 INDUCTOR,SMD,AIR CORE,10T,111NH,5% 1 L28
L32, L33, L34, L35,
..........5 366-0126 INDUCTOR,SMD,AIR CORE,11T,130nH 6 L36, L37
..........5 366-0130 INDUCTOR,POWER,SMD,1uH,10A 2 L25, L40
..........5 366-0380 IND,380NH,AIR CORE,SMT 1 L8
FERRITE,CHIP IMPEDANCE 1500OHMS @ L4, L5, L9, L10,
..........5 366-6152 100MHZ MULTILAYER, 0805 8 L11, L12, L13, L14
ASSY,FM-10S,XFMR,RF AMP OUTPUT
..........5 370-0062 (SBCM) 4 T1, T4, T7, T8
............6 463-0126 TUBING,COPPER,1/8X.014X1.530 4
............6 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.8
..........5 370-0063 ASSY,FM-10S,XFMR,RF AMP INPUT (SBCM) 4 T2, T3, T5, T6
............6 610-2401 WIRE,TEFLON,18 AWG,600V,200C 0.22
EMI SHIELD, MODIFIED 50KE-CBSAFN-
..........5 407-0501 2.5x3.25x.50 1
..........5 408-0300 HEADER,3-PIN,.100 CENTERS,SIP,note 1 J7
TP24, TP25, TP26,
TP27, TP28, TP29,
..........5 413-0603 Chip,Test Point 0603 SMD 7 TP30
TP1, TP2, TP3,
TP4, TP5, TP6,
TP7, TP8, TP9,
TP10, TP11, TP12,
TP13, TP14, TP15,
TP16, TP17, TP18,
TP19, TP20, TP21,
..........5 413-1206 CHIP,TEST POINT,1206,SMD 23 TP22, TP23
..........5 417-0426 CONN,6-PIN,PCB MT,MALE,POWER 1 J1
..........5 417-0701 CONN,SMA FEMALE PC MOUNT 1 J11
J3, J5, J6, J8, J9,
..........5 417-1041 HDR,4PIN,SINGLE ROW,SMT,0.1SP 6 J10
..........5 417-4568 CONN HEADER VERT 8POS .100 TIN 1 J4
Diode, SMT, Zener, 5.1V Motorola
..........5 418-451 BZX84C5V1LT1 1 D12
CONN, 10 PIN, MALE, SMT, 0.050, KEYED,
..........5 418-5010 WITH LATCHES" 2 J12, J13
CONN, 26 PIN, MALE, SMT, 0.050, KEYED,
..........5 418-5026 WITH LATCHES" 1 J2
..........5 463-0127 TUBING,COPPER,1/8X.014X1.300 4

©2013 Broadcast Electronics - 135 -

 - 136 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..........5 519-4050 PCB, PA, STX LP 1
....2 959-4102-380 ASSY,FAN,STX WITH TECTROL PS 1
......3 380-6307 FINGER GUARD,FAN,4.125 CENTERS 2
FAN,LUGGED,AXIAL,12V,120MM X
......3 380-9007-001 38MM,3600RPM 2
........4 380-9007 FAN,12V,120MM X 38MM,3600RPM 1
........4 417-0036 PIN CONN,AMP,350967-1 2
......3 400-0207 STRIP,QUIET SHIELD,.250x.375"" 1.688
......3 418-0233 HSNG,CONN, 4P,1-640509-AMP 1
......3 420-6108 SCREW,6-32X.500,S.S. PH 8
......3 421-6008 6-32 KEP NUT 8
......3 471-4201-200 PANEL,FAN MOUNTING,STX LP 1

©2013 Broadcast Electronics

 - 137 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 959-4201-100 ASSY, SPLITTER/COMBINER, FM, STX LP,
2KW
..1 324-2500 LIGHTPIPE,0.197 DIA,0.5 LONG, PANEL MT. 4
..1 349-0020 SWITCH, ROCKER, DPST, 20A 1
..1 380-9006-001 FAN,WITH CONNECTOR,COUNTER 1
ROTATING,12V DC,120 MM SQ X 76 MM
....2 380-6307 FINGER GUARD,FAN,4.125 CENTERS 1
....2 380-9006 FAN,COUNTER ROTATING,12V DC,120MM X 1
76MM
....2 418-1105 CONN,PLUG,10-PIN,5X2,SAMTEC MINI- 1
MATE
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 8
AWG,GOLD,SAMTEC"
..1 400-0014 GROMMET,3/8IDX5/8ODFOR7/16HOLE 1
..1 400-0207 STRIP,QUIET SHIELD,.250x.375"" 1.1
..1 400-4200 GASKET, EXTRD EMI SHIELD 5.25
SILCON,ALUM,SILVR
..1 402-0000 TY-RAP 9
..1 402-0001 TY-RAP,T+B TY24M,1-1/4 DIA 2
..1 402-0833 CLAMP,CBL,1/4 2
..1 409-0125 SCREW,POLYPRO, 4-40 x 1-1/2,PAN HEAD 4
SLOT
..1 411-7086 TERM BLK FEED-THRU 1-4MM GRAY 2
..1 411-7866 TERM BLK,FEED-THRU,1-4MM GRN/YEL 1
..1 420-0500 SCREW,10-32X.375,BR PH 2
..1 420-3005 SCREW,5/16-18X1.000,S.S. BOLT 4
..1 420-6110 SCREW,6-32X.625,S.S. PH 4
..1 420-8106 SCREW,8-32X.375,S.S. PHH 5
..1 420-8121 SCREW,8-32X.375,BR PH 2
..1 420-8706 SCREW,8-32X.375,BRASS THUMB 1
..1 420-9720 RETAINER,NUT,OD:0.26,FITS SHAFT 5/32"" 4
..1 421-6008 6-32 KEP NUT 2
..1 421-8028 NUT,JAM,1/2-28 UNEF-2B 1
..1 422-0110 SCREW,10-32 X 5/8,PPH,SEM,STEEL,ZINC 4
PLATING"
..1 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 36
..1 423-0007 #10 LOCK INT TOOTH 2
..1 423-6002 #6 LOCK SPLIT 4
..1 423-8002 #8 LOCK SPLIT 5
..1 423-8006 #8 LOCK INT TOOTH 3
..1 423-9002 WASH,INT TOOTH,1/2 1
..1 427-0009-300 CONNECTOR,MODIFIED,OUTPUT,STX 3/5 1
KW
..1 427-0010 ASSY,ADAPTOR 1 5/8 FLANGED 1
..1 441-4801 STOFF, 1/2 SNAP LOCK NYLON .062 PCB" 8
..1 441-6108 STOFF,MF,#6 X .500L,BRASS (NOTE) 13
..1 450-1704 PLUG,HOLE,.687 NYL BLACK 2673 3
..1 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 3.333
..1 469-0366 FINGER STOCK (NOTE!!!!!) 11
..1 471-4220 FRONT PANEL,STX LP,2KW COMBINER 1
..1 471-4225 SAFETY SHIELD FOR ELECTRICAL SOURCE 1
STX LP

©2013 Broadcast Electronics - 137 -

 - 138 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 471-4250-100 WELDMENT,CHASSIS,STX COMBINER 1
..1 471-4253-100 ENCLOSURE,STX COMBINER 1
..1 471-4256-100 COVER,INNER,STX COMBINER 1
..1 471-4257-100 COVER,TOP,STX COMBINER 1
..1 471-4261 STRAP,FAN,STX COMBINER 2
..1 486-7150 HANDLE, 4 X 1.375", BRASS, CHROME 2
PLATED, #10-32 THREADS"
..1 510-273 Foam tape 1/2 thick X 3/4 wide X 17' LONG 0.083
..1 540-1012-100 POWER SUPPLY, 12V 65W AC/DC 1
CONVERTER 2X4" STX LP"
..1 540-1012-501 POWER SUPPLY 12V 80/100W AC/DC 2X4IN 1
..1 594-0073 LABEL,WARNING ROTATING FANS 1
..1 594-0505 LABEL, WARNING-ONLY AUTHORIZED 2
PERSONNEL
..1 849-2010-100 CBL,ASSY,.050 DOUBLE ROW 10 PIN 1
FEMALE IDC ASSEMBLY,28 INCH
..1 849-2526 CBL,ASSY,.050 DOUBLE ROW 26 PIN 1
FEMALE IDC ASSY,25.0 INCH
..1 919-4045 ASSY,2 WAY COMBINER,STX COMBINER 1
....2 007-0018-006 CAP,0603,18pF,50V,5% 1 C6
....2 007-1012 CAP,CER,10pF,50V,2%,SMD 3 C7, C14, C21
....2 007-1201 CAP,CER,12PF,50V,2%,SMD 7 C2, C3, C9, C10,
C16, C17, C23
....2 007-1512 CAP,CER,15pF,50V,2%,SMD 1 C13
....2 007-2200 CAP,CER,2.2pF,50V,.25pF,SMD 3 C5, C12, C19
....2 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 3 C4, C11, C18
....2 007-2202-500 CAP,CER,22pF,50V,2%,SMD 1 C20
....2 007-3300 CAP,CER,3.3PF,50V,.25pF,SMD 2 C22, C24
....2 007-3312 CAP,CER,33pF,50V,2%,SMD 3 C1, C8, C15
....2 046-0033 CAP,PTFE,RF,3.3PF,1000V,+/-0.5PF,SMT 2 C25, C26
....2 091-1511 CAP,TRIMMER,3-10 PF,NPO,25V,SMD 1 C27
....2 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 3 R2, R10, R18
....2 105-0075 Chip Res,75 ohm 1W 1% SMD 2512 3 R1, R9, R17
....2 105-0102 RES, CHIP, 1K OHM, 1W, 5%, 2512 9 R5, R6, R7, R13,
R14, R21, R22, R24,
R30
....2 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 6 R3, R4, R11, R12,
R19, R20
....2 105-0301 RES, CHIP, 300 OHM, 5%, 1W, 2512, SMD 7 R8, R15, R16, R23,
R26, R28, R29
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R25, R27
....2 360-4210 COIL,12 GA,9.45T,280nH 1 L15
......3 640-1200 WIRE,12GA,MAGNET 0.026
....2 366-0120-100 IND, 120NH, AIR, 5%, SMD, 1812 9 L1, L2, L3, L4, L5, L6,
L7, L8, L9
....2 417-0265 CONN,BNC,JACK,THREADED,PC EDGE 1 J1
MOUNT,LOW PROFILE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 2 J2, J3
MOUNT 50 OHM
....2 426-0000 PEM NUT,#10-32 KFS2-032 2 F1, F2
....2 519-4045 PCB,2 WAY COMBINER,STX COMBINER 1 PCB

©2013 Broadcast Electronics

 - 139 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 919-4075 ASSY, STX LP PA/COMBINER LED BOARD 1
(SBCM)
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 4 C2, C3, C6, C9
....2 007-3923 CAP,CER,390pF,100V,5%,SMD 2 C4, C8
....2 007-4702-500 CAP,CER,47pF,50V,2%,SMD 2 C5, C7
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 1 C1
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R21, R24, R25, R26,
R27
....2 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 1 R22
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 2 R18, R20
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 2 R23, R30
....2 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 4 R6, R11, R13, R16
....2 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 1 R3
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R29
....2 102-2210 RES,CHIP,221 OHMS,1/10W,1%,SMD 1 R2
....2 102-4021 RES,CHIP,4.02K OHMS,1/10W,1%,SMD 1 R19
....2 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 9 R4, R7, R8, R9, R10,
R12, R14, R15, R17
....2 216-7002 IC,MOSFET,2N7002LT1,SMD 5 Q1, Q2, Q3, Q4, Q5
....2 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 1 U3
....2 221-0358-001 DUAL OP AMP, SMD, SOIC8 1 U2
....2 231-3170 VR,LM317,SMD 1 U1
....2 325-0807 LED,DUAL,SUPER RED/GRN,SMD,0807 5 DS1, DS2, DS3, DS4,
(note) DS5
....2 340-0004 SW,JUMPER PROGRAMMABLE 1 P1
....2 417-0308 CONN,JACK,3-PIN,SMD 1 J2
....2 418-451 Diode, SMT, Zener, 5.1V Motorola 1 D1
BZX84C5V1LT1
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4075 PCB, STX LP PA/COMBINER LED BOARD 1
..1 919-4095-001 ASSY, STX LP COMBINER FILTER BOAR 1
(SBCM)
....2 007-0100-035 CAP, LYTIC, 100UF, 35V, 20%, LOW IMP, 1 C6
SMD
....2 007-0102 CAP,CER,CHIP,1000pF,50V,5%,SMD 4 C11, C12, C17, C18
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 10 C1, C4, C7, C8, C10,
C13, C14, C16, C19,
C21
....2 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C9, C15
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 3 C3, C5, C20
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 2 R9, R25
....2 102-0152 RES,CHIP,1.5K OHM,0.1%,1/10W,0805,SMD 1 R20
....2 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 2 R12, R18
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 4 R11, R13, R14, R19
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 1 R3
....2 102-1200 RES,CHIP,121 OHMS,1/10W,1%,SMD 2 R2, R6
(NOTE)
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 2 R17, R23
....2 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R1
....2 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R10
....2 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 2 R15, R21

©2013 Broadcast Electronics - 139 -

 - 140 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 102-7521 RES,CHIP,75 OHMS,1/10W,1%,SMD 4 R4, R5, R7, R8
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R16, R22
....2 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 2 U1, U3
....2 221-8361 IC, TRUE AVERAGE POWER DETECTOR 2 U2, U4
....2 320-0603 LED GREEN SMD 2 DS1, DS2
....2 350-197 INDUCTOR, SMT, POWER, 1uH 2 L1, L2
....2 417-0700 CONN,PCB MT,2PIN 1 J8
....2 417-0701 CONN,SMA FEMALE PC MOUNT 1 J3
....2 417-1102 CONN,HEADER,VERT,4-PIN,2X2,SAMTEC 1 J6
MINI-MATE
....2 417-1105 CONN,HEADER,VERT,10-PIN,5X2,SAMTEC 1 J4
MINI-MATE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 1 J5
MOUNT 50 OHM
....2 418-0255 CONN,MALE,4PIN 1 J2
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J7
WITH LATCHES"
....2 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4095-001 PCB, STX LP COMBINER FILTER BOARD 1 PCB
..1 949-4101-100 CABLE,12GA BLUE,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4101-200 CABLE,12GA BROWN,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4114-100 HARNESS,MAIN,STX COMBINER WITH -501 1
PS (SBCM)
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 410-1421 LUG,QUICK DISCONNECT #18-22 2
....2 410-2478 CRIMP TERMINAL,AMP 640707-1 10
....2 417-0053 SKT,CONN 641294-1 AMP 6
....2 417-0306 HSNG,3 POS,SL-156 2
....2 417-0606 HSNG,6 POS,SL-156 1
....2 417-2806 CONNECTOR, HOUSING, 4-PIN .001" 1.000 "
"
....2 417-2816 PIN, CRIMP .100,22-24 GA" 4
....2 417-4025 HOUSING,4-PIN,AMP 640250-4 1
....2 418-0240 PLUG,FEM,4PIN 1
....2 418-0701 CONN,HOUSING,2 PIN 1
....2 418-1102 CONN,PLUG,4-PIN,2X2,SAMTEC MINI-MATE 1
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 4
AWG,GOLD,SAMTEC"
....2 601-1800-054 WIRE,AWG 18,STRANDED,GREEN/YELLOW 1.917
....2 601-2209 WIRE,AWG22,7/30 WHT 18.167
....2 611-2500 TUB,HT SHK,1/4 0.167
....2 611-3750 TUB,HT SHK,3/8 0.208
..1 949-4115 CABLE,RFL PWR,STX COMBINER,3KW/5KW 1

©2013 Broadcast Electronics

 - 141 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1702 RIGHT ANGLE CRIMP TYPE PLUG,SMB,50 1
OHM
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 3
..1 949-4116 CABLE,FWD PWR,STX COMBINER,3KW/5KW 1
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1
....2 417-8030 CONN,PLUG,RT ANG,SMA,HEX CRIMP 1
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 2.5
..1 959-4005-102 ASSY,STX SPLITTER 2 1
....2 450-1700 PLUG,HOLE,1/2 NYL BLACK 2643 3
....2 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 0.145
....2 469-5500 FINGER STOCK,TECH-ETCH 250P37-16-02 1
....2 471-4255-100 COVER,SPLITTER,STX COMBINER 1
....2 919-4005-102 ASSY,2-WAY,STX LP PA/COMBINER 1
SPLITTER BOARD
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 1 R67
......3 417-0037-001 BNC,R ANGLE PC MTG,SHIELDED -1 J6 (PLACE PART
BACK IN STOCK)
......3 919-4005-103 ASSY,3-WAY,STX LP PA/COMBINER 1
SPLITTER BOARD(SBCM)
........4 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 4 C27, C28, C30, C33
........4 007-1024 CAP,CER,.001uF,50V,10%,SMD 7 C36, C48, C55, C60,
C64, C74, C81
........4 007-1034 CAP,CER,0.01uF,50V,10%,SMD 4 C50, C68, C70, C75
........4 007-1034-001 CAP,CER,.01UF,10%,50V,0603,SMD 16 C6, C7, C8, C9, C11,
C12, C13, C14, C15,
C16, C17, C18, C19,
C20, C21, C22
........4 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 14 C1, C2, C3, C4, C5,
C10, C23, C24, C25,
C26, C29, C34, C84,
C85
........4 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 12 C35, C39, C40, C44,
C51, C61, C65, C67,
C69, C78, C79, C82
........4 007-1054-001 CAP,CER,1UF,10%,10V,X7R,0805,SMD 1 C47
........4 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C32, C80
........4 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 1 C77
........4 007-2202-500 CAP,CER,22pF,50V,2%,SMD 1 C56
........4 007-2702-500 CAP,CER,27pF,50V,2%,SMD 1 C58
........4 007-3912 CAP,CER,39pF,50V,5%,SMD 1 C62
........4 007-6800-500 CAP,CER,6.8pF,50V,.25pF,SMD 10 C37, C38, C41, C42,
C45, C46, C49, C52,
C53, C54
........4 007-6812 CAP,CER,68pF,50V,2%,SMD 1 C43
........4 009-1032-050 CAP,CER CHIP,1000PF,50V,5% 1 C63
........4 070-1065 CAP,TANT,10UF,20V,10%,SMD 4 C31, C59, C66, C73

©2013 Broadcast Electronics - 141 -

 - 142 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 102-0000 RES,CHIP,0 OHM,0805,SMD 12 R43, R46, R47, R49,
R50, R130, R131,
R132, R134, R136,
R137, R143
........4 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 2 R94, R95
........4 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R1, R2, R34, R38,
R111, R146
........4 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 9 R5, R19, R24, R53,
R70, R92, R112,
R114, R138
........4 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 26 R16, R52, R74, R75,
R77, R78, R79, R80,
R81, R85, R87, R89,
R90, R98, R100,
R102, R104, R106,
R119, R122, R123,
R124, R125, R126,
R147, R151
........4 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 12 R54, R82, R84, R88,
R93, R97, R99,
R139, R141, R142,
R149, R150
........4 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 4 R56, R73, R127,
R140
........4 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R68
........4 102-1503 RES,CHIP,150K OHMS,1/10W,1%,SMD 2 R83, R144
........4 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 3 R7, R13, R55
........4 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 16 R3, R4, R8, R9, R11,
R12, R15, R21, R23,
R26, R28, R30, R32,
R35, R37, R40
........4 102-2212 RES,CHIP,22.1K OHMS,1/10W,1%,SMD 1 R121
........4 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 1 R76
........4 102-2273 RES,CHIP,2.2M OHM,1/10 W,5% 1 R148
........4 102-2410 RES,CHIP,243 OHMS,1/10W,1%,0805,SMD 1 R96
........4 102-2431 RES,CHIP,2.43K OHMS,1/10W,1%,SMD 6 R42, R44, R45, R71,
R107, R108
........4 102-2491 RES,CHIP,2.49K,1/10W,1%,SMD 1 R101
........4 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R105
........4 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 1 R59
........4 102-3323 RES,CHIP,332K OHMS,1/10W,1%,SMD 1 R120
........4 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R117
........4 102-4223 RES,CHIP,422k OHM,1%,1/10W,0805,SMD 1 R86
........4 102-4320 RES,CHIP,432 OHMS,1/10W,1%,SMD 1 R91
........4 102-5491 RES,CHIP,5.49K,1/10W,1%,SMD 1 R57
........4 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 1 R110
........4 104-1001 RES,CHIP,1.0 K OHM,1%,1/16W,0603,SMD 3 R58, R116, R118
........4 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 1 R103
........4 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 7 R60, R61, R62, R63,
R64, R65, R66
........4 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 3 R109, R128, R129
........4 198-1054 TRMR,10K OHMS,TOP ADJ,SMD (N) 1 R69

©2013 Broadcast Electronics

 - 143 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 198-2024 TRMR,2K OHMS,TOP ADJUST,10 TURN,SMD 1 R115
........4 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 5 D2, D3, D4, D5, D6
........4 210-4031 TSTR, BIPOLAR POWER, NPN, NJT4031N, 1 Q14
SMD
........4 210-7805 REG, 5V, 1A, 3 TERMINAL, POSITIVE 1 U14
VOLTAGE, SMD, D-PAK
........4 210-8504 RF POWER TRANSISTOR, PD85004, SMD, 1 U11
SOD-89
........4 216-0339 IC,LM339AM,VOLTAGE COMPARATOR,SMD 1 U12
........4 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 1 U16
........4 216-1963 LINEAR TECH LT1963 1.5 AMP LDO 1 U10
ADJUSTABLE REGULATOR
........4 216-2343 MOSFET,P CHAN,2A,30V,.08 OHM,SOT-23 1 Q6
........4 216-4013 IC,MC14013BD DUAL D FLIP FLOP,SMD 1 U20
........4 216-5235 ANALOG DEVICES AD5235 DIGITAL POTS 2 U3, U19
........4 216-6549 IC, DUAL LVDS DIFFERENTIAL DRIVERS 1 U1
AND RECEIVERS, TSSOP16
........4 216-7002 IC,MOSFET,2N7002LT1,SMD 19 Q1, Q2, Q3, Q4, Q5,
Q7, Q8, Q9, Q10,
Q11, Q12, Q13, Q15,
Q16, Q17, Q18, Q19,
Q20, Q21
........4 216-7400 IC,SN74AHCT1G00DBV,2-INPUT POS 1 U7
NAND,DBV,SMD
........4 216-7414-001 IC, SCHMITT TRIGGERED SINGLE GATE 5 U4, U6, U9, U17, U18
INVERTER,SC-70
........4 216-7490 ANALOG DEVICES AD7490 16 CHAN A/D 1 U2
........4 216-8574 IC, ADI AD8574 4CHANNEL R/R OP AMP 1 U8
........4 220-7425 IC, COMPARATOR, LMV7219, 7NS, 2.5-5V, R- 1 U21
R
........4 221-8361 IC, TRUE AVERAGE POWER DETECTOR 1 U15
........4 224-0324 IC,LM324,QUAD OP-AMP,SMD 1 U13
........4 224-4000 GATE, SINGLE, XOR, 2 INPUT, 8NS TPD 1 U5
........4 231-0136 IC,VOLT REF,2.5V,8-PIN SOIC 1 D1
........4 320-0603 LED GREEN SMD 4 DS1, DS2, DS3, DS4
........4 340-0004 SW,JUMPER PROGRAMMABLE 2 P4, P5
........4 350-188 INDUCTOR, 1210 1uH CHIP 2 L6, L7
........4 366-0010-010 INDUCTOR,10 NH,5%,0805CS- 1 L8
100XJB,0805,SMD
........4 366-0068-200 IND,68NH,CER WW,0805,5%,SMD 1 L9
........4 366-0100 IND,100NH LAMINATED CER,0805,SMD 1 L10
........4 366-0180-001 INDUCTOR, 180nH, 10%, SMD, 1008 5 L1, L2, L3, L4, L5
........4 413-0603 Chip,Test Point 0603 SMD 3 TP1, TP2, TP3
........4 413-1206 CHIP,TEST POINT,1206,SMD 1 TP6
........4 413-1520 TERM,TURRET SINGLE, .109 L, .078" BASE" 1 TP5
........4 417-0037-001 BNC,R ANGLE PC MTG,SHIELDED 2 J6, J7
........4 417-0200 CONN,HEADER 20 PIN 0.2 J5, J8
........4 417-1050 .100,10 pin double row terminal strip" 1 J4
........4 417-3120 CONN, BNC RIGHT ANGLE DUAL PORT PCB 1 J2
MOUNT/SHIELDED
........4 417-4604 CONN, PCB MOUNTED RJ45 RIGHT ANGLE 1 J1
WITH LEDS

©2013 Broadcast Electronics - 143 -

 - 144 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J11
WITH LATCHES"
........4 519-4005-103 PCB, STX LP COMBINER SPLITTER BOARD 1
..1 959-4015-002 ASSY,STX RF INPUT 2 1
....2 131-5080 RES,50 OHM,800W,2 PF,5%,FLANGED 2 R1, R2
....2 360-4211-200 COIL, 14GA, 9T, 200nH, STX 2KW 1
......3 410-1552 LUG,TERM #8 RING CRIMP 16-22 1
......3 611-5000 TUB,HT SHK 1/2 1.25
......3 640-1400 WIRE,14GA,MAGNET 0.013
....2 420-6106 SCREW,6-32X.375,S.S. PH 8
....2 420-6506 SCREW,6-32X.375,S.S. PH FH 6
....2 422-6107 SCREW,SEMS 6-32 X 7/16 PAN PH.ST." 5
....2 423-6002 #6 LOCK SPLIT 8
....2 423-6011 #6 FLAT .310 X .160 X .030 8
....2 427-0067 CONNECTOR, N, THK PCB, STRAIGHT, PNL 2 J1, J2
MTG
....2 440-0301 STANDOFF, 3/16 .060 SPACER" 1
....2 441-4202 STOFF, COPPER, .375D x 1.000" 2.000 " "
....2 441-5504 STOFF,SS 1/4 HEX X 7/16" LONG,MALE- 5
FEMALE 8-32"
....2 455-4000-100 HEATSINK,COMBINER,STX 1
....2 455-4001-100 PLATE,ALUMINUM,STX 3/5 KW 1
....2 463-4501 CONNECTOR, .060 COPPER STAR 1
....2 519-4015 PCB, STX LP PA/COMBINER RF INPUT 1
BOARD
....2 919-4025 ASSY, STX LP PA/COMBINER BACKER 1
BOARD(SBCM)
......3 007-0020-006 CAP,20pF,5%,50v,SMD,0603 1 C7
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 6 C4, C6, C10, C12,
C16, C18
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 8 C1, C2, C3, C8, C9,
C13, C14, C15
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 1 R6
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R2, R3, R8, R9, R14,
R15
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 4 R17, R20, R21, R22
......3 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 3 R5, R12, R18
......3 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 3 R1, R7, R13
......3 102-4321 RES,CHIP,4.32K OHMS,1/10W,1%,SMD 4 R4, R10, R16, R19
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 3 D1, D2, D3
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 3 U2, U5, U7
......3 216-1490 IC,OP AMP,LT1490,DUAL,R/R I/O,SMT 2 U3, U8
......3 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 3 U1, U4, U6
......3 413-1206 CHIP,TEST POINT,1206,SMD 3 TP1, TP2, TP3
......3 417-2838 HEADER 4-PIN .100 R.ANGLE LOCKING" 1 J1
......3 519-4025 PCB, STX LP PA/COMBINER BACKER 1
BOARD

©2013 Broadcast Electronics

 - 145 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 959-4301-100 ASSY, SPLITTER/COMBINER, FM, STX LP,
3KW
..1 324-2500 LIGHTPIPE,0.197 DIA,0.5 LONG, PANEL MT. 4
..1 349-0020 SWITCH, ROCKER, DPST, 20A 1
..1 380-9006-001 FAN,WITH CONNECTOR,COUNTER 1
ROTATING,12V DC,120 MM SQ X 76 MM
....2 380-6307 FINGER GUARD,FAN,4.125 CENTERS 1
....2 380-9006 FAN,COUNTER ROTATING,12V DC,120MM X 1
76MM
....2 418-1105 CONN,PLUG,10-PIN,5X2,SAMTEC MINI-MATE 1
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 8
AWG,GOLD,SAMTEC"
..1 400-0014 GROMMET,3/8IDX5/8ODFOR7/16HOLE 1
..1 400-0207 STRIP,QUIET SHIELD,.250x.375"" 1.1
..1 400-4200 GASKET, EXTRD EMI SHIELD 5.25
SILCON,ALUM,SILVR
..1 402-0000 TY-RAP 9
..1 402-0001 TY-RAP,T+B TY24M,1-1/4 DIA 2
..1 402-0833 CLAMP,CBL,1/4 2
..1 409-0125 SCREW,POLYPRO, 4-40 x 1-1/2,PAN HEAD 4
SLOT
..1 411-7086 TERM BLK FEED-THRU 1-4MM GRAY 2
..1 411-7866 TERM BLK,FEED-THRU,1-4MM GRN/YEL 1
..1 420-0500 SCREW,10-32X.375,BR PH 2
..1 420-3005 SCREW,5/16-18X1.000,S.S. BOLT 4
..1 420-6110 SCREW,6-32X.625,S.S. PH 4
..1 420-8106 SCREW,8-32X.375,S.S. PHH 5
..1 420-8121 SCREW,8-32X.375,BR PH 3
..1 420-8706 SCREW,8-32X.375,BRASS THUMB 1
..1 420-9720 RETAINER,NUT,OD:0.26,FITS SHAFT 5/32"" 4
..1 421-6008 6-32 KEP NUT 2
..1 421-8028 NUT,JAM,1/2-28 UNEF-2B 1
..1 422-0110 SCREW,10-32 X 5/8,PPH,SEM,STEEL,ZINC 4
PLATING"
..1 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 36
..1 423-0007 #10 LOCK INT TOOTH 2
..1 423-6002 #6 LOCK SPLIT 4
..1 423-8002 #8 LOCK SPLIT 5
..1 423-8006 #8 LOCK INT TOOTH 4
..1 423-9002 WASH,INT TOOTH,1/2 1
..1 427-0009-300 CONNECTOR,MODIFIED,OUTPUT,STX 3/5 1
KW
..1 427-0010 ASSY,ADAPTOR 1 5/8 FLANGED 1
..1 441-4801 STOFF, 1/2 SNAP LOCK NYLON .062 PCB" 8
..1 441-6108 STOFF,MF,#6 X .500L,BRASS (NOTE) 13
..1 450-1704 PLUG,HOLE,.687 NYL BLACK 2673 2
..1 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 3.333
..1 469-0366 FINGER STOCK (NOTE!!!!!) 11
..1 471-4211 FRONT PANEL, STX LP,3KW COMBINER 1
..1 471-4225 SAFETY SHIELD FOR ELECTRICAL SOURCE 1
STX LP
..1 471-4250-100 WELDMENT,CHASSIS,STX COMBINER 1

©2013 Broadcast Electronics - 145 -

 - 146 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 471-4253-100 ENCLOSURE,STX COMBINER 1
..1 471-4256-100 COVER,INNER,STX COMBINER 1
..1 471-4257-100 COVER,TOP,STX COMBINER 1
..1 471-4261 STRAP,FAN,STX COMBINER 2
..1 486-7150 HANDLE, 4 X 1.375", BRASS, CHROME 2
PLATED, #10-32 THREADS"
..1 510-273 Foam tape 1/2 thick X 3/4 wide X 17' LONG 0.083
..1 540-1012-100 POWER SUPPLY, 12V 65W AC/DC 1
CONVERTER 2X4" STX LP"
..1 540-1012-501 POWER SUPPLY 12V 80/100W AC/DC 2X4IN 1
..1 594-0073 LABEL,WARNING ROTATING FANS 1
..1 594-0505 LABEL, WARNING-ONLY AUTHORIZED 2
PERSONNEL
..1 849-2010-100 CBL,ASSY,.050 DOUBLE ROW 10 PIN 1
FEMALE IDC ASSEMBLY,28 INCH
..1 849-2526 CBL,ASSY,.050 DOUBLE ROW 26 PIN 1
FEMALE IDC ASSY,25.0 INCH
..1 919-4065-001 ASSY, STX LP PA/COMBINER 3WAY 1
COMBINER BOARD
....2 007-1012 CAP,CER,10pF,50V,2%,SMD 3 C7, C14, C21
....2 007-1201 CAP,CER,12PF,50V,2%,SMD 6 C2, C3, C9, C10,
C16, C17
....2 007-1512 CAP,CER,15pF,50V,2%,SMD 3 C6, C13, C20
....2 007-2200 CAP,CER,2.2pF,50V,.25pF,SMD 3 C5, C12, C19
....2 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 3 C4, C11, C18
....2 007-3300 CAP,CER,3.3PF,50V,.25pF,SMD 3 C22, C23, C24
....2 007-3312 CAP,CER,33pF,50V,2%,SMD 3 C1, C8, C15
....2 046-0047 CAP,PTFE,RF,4.7PF,1000V,+/-0.5PF,SMT 1 C25
....2 091-1511 CAP,TRIMMER,3-10 PF,NPO,25V,SMD 1 C27
....2 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 3 R2, R10, R18
....2 105-0075 Chip Res,75 ohm 1W 1% SMD 2512 3 R1, R9, R17
....2 105-0102 RES, CHIP, 1K OHM, 1W, 5%, 2512 7 R5, R6, R13, R14,
R21, R22, R30
....2 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 6 R3, R4, R11, R12,
R19, R20
....2 105-0301 RES, CHIP, 300 OHM, 5%, 1W, 2512, SMD 9 R7, R8, R15, R16,
R23, R24, R26, R28,
R29
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R25, R27
....2 360-4210 COIL,12 GA,9.45T,280nH 1 L15
......3 640-1200 WIRE,12GA,MAGNET 0.026
....2 366-0120-100 IND, 120NH, AIR, 5%, SMD, 1812 9 L1, L2, L3, L4, L5,
L6, L7, L8, L9
....2 417-0265 CONN,BNC,JACK,THREADED,PC EDGE 1 J1
MOUNT,LOW PROFILE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 2 J2, J3
MOUNT 50 OHM
....2 426-0000 PEM NUT,#10-32 KFS2-032 2 F1, F2
....2 519-4065-001 PCB, STX LP PA/COMBINER 3WAY 1 PCB
COMBINER BOARD
..1 919-4075 ASSY, STX LP PA/COMBINER LED BOARD 1
(SBCM)

©2013 Broadcast Electronics

 - 147 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 4 C2, C3, C6, C9
....2 007-3923 CAP,CER,390pF,100V,5%,SMD 2 C4, C8
....2 007-4702-500 CAP,CER,47pF,50V,2%,SMD 2 C5, C7
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 1 C1
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R21, R24, R25, R26,
R27
....2 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 1 R22
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 2 R18, R20
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 2 R23, R30
....2 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 4 R6, R11, R13, R16
....2 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 1 R3
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R29
....2 102-2210 RES,CHIP,221 OHMS,1/10W,1%,SMD 1 R2
....2 102-4021 RES,CHIP,4.02K OHMS,1/10W,1%,SMD 1 R19
....2 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 9 R4, R7, R8, R9, R10,
R12, R14, R15, R17
....2 216-7002 IC,MOSFET,2N7002LT1,SMD 5 Q1, Q2, Q3, Q4, Q5
....2 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 1 U3
....2 221-0358-001 DUAL OP AMP, SMD, SOIC8 1 U2
....2 231-3170 VR,LM317,SMD 1 U1
....2 325-0807 LED,DUAL,SUPER RED/GRN,SMD,0807 (note) 5 DS1, DS2, DS3,
DS4, DS5
....2 340-0004 SW,JUMPER PROGRAMMABLE 1 P1
....2 417-0308 CONN,JACK,3-PIN,SMD 1 J2
....2 418-451 Diode, SMT, Zener, 5.1V Motorola 1 D1
BZX84C5V1LT1
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4075 PCB, STX LP PA/COMBINER LED BOARD 1
..1 919-4095-001 ASSY, STX LP COMBINER FILTER BOAR 1
(SBCM)
....2 007-0100-035 CAP, LYTIC, 100UF, 35V, 20%, LOW IMP, SMD 1 C6
....2 007-0102 CAP,CER,CHIP,1000pF,50V,5%,SMD 4 C11, C12, C17, C18
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 10 C1, C4, C7, C8, C10,
C13, C14, C16, C19,
C21
....2 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C9, C15
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 3 C3, C5, C20
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 2 R9, R25
....2 102-0152 RES,CHIP,1.5K OHM,0.1%,1/10W,0805,SMD 1 R20
....2 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 2 R12, R18
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 4 R11, R13, R14, R19
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 1 R3
....2 102-1200 RES,CHIP,121 OHMS,1/10W,1%,SMD (NOTE) 2 R2, R6
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 2 R17, R23
....2 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R1
....2 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R10
....2 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 2 R15, R21
....2 102-7521 RES,CHIP,75 OHMS,1/10W,1%,SMD 4 R4, R5, R7, R8
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R16, R22
....2 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 2 U1, U3
....2 221-8361 IC, TRUE AVERAGE POWER DETECTOR 2 U2, U4

©2013 Broadcast Electronics - 147 -

 - 148 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 320-0603 LED GREEN SMD 2 DS1, DS2
....2 350-197 INDUCTOR, SMT, POWER, 1uH 2 L1, L2
....2 417-0700 CONN,PCB MT,2PIN 1 J8
....2 417-0701 CONN,SMA FEMALE PC MOUNT 1 J3
....2 417-1102 CONN,HEADER,VERT,4-PIN,2X2,SAMTEC 1 J6
MINI-MATE
....2 417-1105 CONN,HEADER,VERT,10-PIN,5X2,SAMTEC 1 J4
MINI-MATE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 1 J5
MOUNT 50 OHM
....2 418-0255 CONN,MALE,4PIN 1 J2
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J7
WITH LATCHES"
....2 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4095-001 PCB, STX LP COMBINER FILTER BOARD 1 PCB
..1 949-4101-100 CABLE,12GA BLUE,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4101-200 CABLE,12GA BROWN,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4114-100 HARNESS,MAIN,STX COMBINER WITH -501 1
PS (SBCM)
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 410-1421 LUG,QUICK DISCONNECT #18-22 2
....2 410-2478 CRIMP TERMINAL,AMP 640707-1 10
....2 417-0053 SKT,CONN 641294-1 AMP 6
....2 417-0306 HSNG,3 POS,SL-156 2
....2 417-0606 HSNG,6 POS,SL-156 1
....2 417-2806 CONNECTOR, HOUSING, 4-PIN .001" 1.000 " "
....2 417-2816 PIN, CRIMP .100,22-24 GA" 4
....2 417-4025 HOUSING,4-PIN,AMP 640250-4 1
....2 418-0240 PLUG,FEM,4PIN 1
....2 418-0701 CONN,HOUSING,2 PIN 1
....2 418-1102 CONN,PLUG,4-PIN,2X2,SAMTEC MINI-MATE 1
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 4
AWG,GOLD,SAMTEC"
....2 601-1800-054 WIRE,AWG 18,STRANDED,GREEN/YELLOW 1.917
....2 601-2209 WIRE,AWG22,7/30 WHT 18.16
7
....2 611-2500 TUB,HT SHK,1/4 0.167
....2 611-3750 TUB,HT SHK,3/8 0.208
..1 949-4115 CABLE,RFL PWR,STX COMBINER,3KW/5KW 1
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1702 RIGHT ANGLE CRIMP TYPE PLUG,SMB,50 1
OHM
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1

©2013 Broadcast Electronics

 - 149 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 3
..1 949-4116 CABLE,FWD PWR,STX COMBINER,3KW/5KW 1
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1
....2 417-8030 CONN,PLUG,RT ANG,SMA,HEX CRIMP 1
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 2.5
..1 959-4005-103 ASSY, STX SPLITTER 3 1
....2 450-1700 PLUG,HOLE,1/2 NYL BLACK 2643 2
....2 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 0.145
....2 469-5500 FINGER STOCK,TECH-ETCH 250P37-16-02 0.5
....2 471-4255-100 COVER,SPLITTER,STX COMBINER 1
....2 919-4005-103 ASSY,3-WAY,STX LP PA/COMBINER 1
SPLITTER BOARD(SBCM)
......3 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 4 C27, C28, C30, C33
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 7 C36, C48, C55, C60,
C64, C74, C81
......3 007-1034 CAP,CER,0.01uF,50V,10%,SMD 4 C50, C68, C70, C75
......3 007-1034-001 CAP,CER,.01UF,10%,50V,0603,SMD 16 C6, C7, C8, C9, C11,
C12, C13, C14, C15,
C16, C17, C18, C19,
C20, C21, C22
......3 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 14 C1, C2, C3, C4, C5,
C10, C23, C24, C25,
C26, C29, C34, C84,
C85
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 12 C35, C39, C40, C44,
C51, C61, C65, C67,
C69, C78, C79, C82
......3 007-1054-001 CAP,CER,1UF,10%,10V,X7R,0805,SMD 1 C47
......3 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C32, C80
......3 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 1 C77
......3 007-2202-500 CAP,CER,22pF,50V,2%,SMD 1 C56
......3 007-2702-500 CAP,CER,27pF,50V,2%,SMD 1 C58
......3 007-3912 CAP,CER,39pF,50V,5%,SMD 1 C62
......3 007-6800-500 CAP,CER,6.8pF,50V,.25pF,SMD 10 C37, C38, C41, C42,
C45, C46, C49, C52,
C53, C54
......3 007-6812 CAP,CER,68pF,50V,2%,SMD 1 C43
......3 009-1032-050 CAP,CER CHIP,1000PF,50V,5% 1 C63
......3 070-1065 CAP,TANT,10UF,20V,10%,SMD 4 C31, C59, C66, C73
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 12 R43, R46, R47, R49,
R50, R130, R131,
R132, R134, R136,
R137, R143
......3 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 2 R94, R95
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R1, R2, R34, R38,
R111, R146
......3 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 9 R5, R19, R24, R53,
R70, R92, R112,
R114, R138

©2013 Broadcast Electronics - 149 -

 - 150 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 26 R16, R52, R74, R75,
R77, R78, R79, R80,
R81, R85, R87, R89,
R90, R98, R100,
R102, R104, R106,
R119, R122, R123,
R124, R125, R126,
R147, R151
......3 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 12 R54, R82, R84, R88,
R93, R97, R99,
R139, R141, R142,
R149, R150
......3 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 4 R56, R73, R127,
R140
......3 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R68
......3 102-1503 RES,CHIP,150K OHMS,1/10W,1%,SMD 2 R83, R144
......3 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 3 R7, R13, R55
......3 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 16 R3, R4, R8, R9, R11,
R12, R15, R21, R23,
R26, R28, R30, R32,
R35, R37, R40
......3 102-2212 RES,CHIP,22.1K OHMS,1/10W,1%,SMD 1 R121
......3 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 1 R76
......3 102-2273 RES,CHIP,2.2M OHM,1/10 W,5% 1 R148
......3 102-2410 RES,CHIP,243 OHMS,1/10W,1%,0805,SMD 1 R96
......3 102-2431 RES,CHIP,2.43K OHMS,1/10W,1%,SMD 6 R42, R44, R45, R71,
R107, R108
......3 102-2491 RES,CHIP,2.49K,1/10W,1%,SMD 1 R101
......3 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R105
......3 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 1 R59
......3 102-3323 RES,CHIP,332K OHMS,1/10W,1%,SMD 1 R120
......3 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R117
......3 102-4223 RES,CHIP,422k OHM,1%,1/10W,0805,SMD 1 R86
......3 102-4320 RES,CHIP,432 OHMS,1/10W,1%,SMD 1 R91
......3 102-5491 RES,CHIP,5.49K,1/10W,1%,SMD 1 R57
......3 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 1 R110
......3 104-1001 RES,CHIP,1.0 K OHM,1%,1/16W,0603,SMD 3 R58, R116, R118
......3 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 1 R103
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 7 R60, R61, R62, R63,
R64, R65, R66
......3 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 3 R109, R128, R129
......3 198-1054 TRMR,10K OHMS,TOP ADJ,SMD (N) 1 R69
......3 198-2024 TRMR,2K OHMS,TOP ADJUST,10 TURN,SMD 1 R115
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 5 D2, D3, D4, D5, D6
......3 210-4031 TSTR, BIPOLAR POWER, NPN, NJT4031N, 1 Q14
SMD
......3 210-7805 REG, 5V, 1A, 3 TERMINAL, POSITIVE 1 U14
VOLTAGE, SMD, D-PAK
......3 210-8504 RF POWER TRANSISTOR, PD85004, SMD, 1 U11
SOD-89
......3 216-0339 IC,LM339AM,VOLTAGE COMPARATOR,SMD 1 U12
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 1 U16

©2013 Broadcast Electronics

 - 151 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 216-1963 LINEAR TECH LT1963 1.5 AMP LDO 1 U10
ADJUSTABLE REGULATOR
......3 216-2343 MOSFET,P CHAN,2A,30V,.08 OHM,SOT-23 1 Q6
......3 216-4013 IC,MC14013BD DUAL D FLIP FLOP,SMD 1 U20
......3 216-5235 ANALOG DEVICES AD5235 DIGITAL POTS 2 U3, U19
......3 216-6549 IC, DUAL LVDS DIFFERENTIAL DRIVERS AND 1 U1
RECEIVERS, TSSOP16
......3 216-7002 IC,MOSFET,2N7002LT1,SMD 19 Q1, Q2, Q3, Q4, Q5,
Q7, Q8, Q9, Q10,
Q11, Q12, Q13, Q15,
Q16, Q17, Q18, Q19,
Q20, Q21
......3 216-7400 IC,SN74AHCT1G00DBV,2-INPUT POS 1 U7
NAND,DBV,SMD
......3 216-7414-001 IC, SCHMITT TRIGGERED SINGLE GATE 5 U4, U6, U9, U17,
INVERTER,SC-70 U18
......3 216-7490 ANALOG DEVICES AD7490 16 CHAN A/D 1 U2
......3 216-8574 IC, ADI AD8574 4CHANNEL R/R OP AMP 1 U8
......3 220-7425 IC, COMPARATOR, LMV7219, 7NS, 2.5-5V, R- 1 U21
R
......3 221-8361 IC, TRUE AVERAGE POWER DETECTOR 1 U15
......3 224-0324 IC,LM324,QUAD OP-AMP,SMD 1 U13
......3 224-4000 GATE, SINGLE, XOR, 2 INPUT, 8NS TPD 1 U5
......3 231-0136 IC,VOLT REF,2.5V,8-PIN SOIC 1 D1
......3 320-0603 LED GREEN SMD 4 DS1, DS2, DS3, DS4
......3 340-0004 SW,JUMPER PROGRAMMABLE 2 P4, P5
......3 350-188 INDUCTOR, 1210 1uH CHIP 2 L6, L7
......3 366-0010-010 INDUCTOR,10 NH,5%,0805CS- 1 L8
100XJB,0805,SMD
......3 366-0068-200 IND,68NH,CER WW,0805,5%,SMD 1 L9
......3 366-0100 IND,100NH LAMINATED CER,0805,SMD 1 L10
......3 366-0180-001 INDUCTOR, 180nH, 10%, SMD, 1008 5 L1, L2, L3, L4, L5
......3 413-0603 Chip,Test Point 0603 SMD 3 TP1, TP2, TP3
......3 413-1206 CHIP,TEST POINT,1206,SMD 1 TP6
......3 413-1520 TERM,TURRET SINGLE, .109 L, .078" BASE" 1 TP5
......3 417-0037-001 BNC,R ANGLE PC MTG,SHIELDED 2 J6, J7
......3 417-0200 CONN,HEADER 20 PIN 0.2 J5, J8
......3 417-1050 .100,10 pin double row terminal strip" 1 J4
......3 417-3120 CONN, BNC RIGHT ANGLE DUAL PORT PCB 1 J2
MOUNT/SHIELDED
......3 417-4604 CONN, PCB MOUNTED RJ45 RIGHT ANGLE 1 J1
WITH LEDS
......3 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J11
WITH LATCHES"
......3 519-4005-103 PCB, STX LP COMBINER SPLITTER BOARD 1
..1 959-4015-003 ASSY,STX RF INPUT 3 1
....2 131-5080 RES,50 OHM,800W,2 PF,5%,FLANGED 3 R2, R3, R4
....2 360-4211 COIL,14 GA,7.65T, 130nH 1
......3 410-1552 LUG,TERM #8 RING CRIMP 16-22 1
......3 611-5000 TUB,HT SHK 1/2 1.25
......3 640-1400 WIRE,14GA,MAGNET 0.012
....2 420-6106 SCREW,6-32X.375,S.S. PH 12

©2013 Broadcast Electronics - 151 -

 - 152 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 420-6506 SCREW,6-32X.375,S.S. PH FH 6
....2 422-6107 SCREW,SEMS 6-32 X 7/16 PAN PH.ST." 5
....2 423-6002 #6 LOCK SPLIT 12
....2 423-6011 #6 FLAT .310 X .160 X .030 12
....2 427-0067 CONNECTOR, N, THK PCB, STRAIGHT, PNL 3 J2, J3, J4
MTG
....2 440-0301 STANDOFF, 3/16 .060 SPACER" 1
....2 441-4202 STOFF, COPPER, .375D x 1.000" 3.000 " "
....2 441-5504 STOFF,SS 1/4 HEX X 7/16" LONG,MALE- 5
FEMALE 8-32"
....2 455-4000-100 HEATSINK,COMBINER,STX 1
....2 455-4001-100 PLATE,ALUMINUM,STX 3/5 KW 1
....2 463-4501 CONNECTOR, .060 COPPER STAR 1
....2 519-4015 PCB, STX LP PA/COMBINER RF INPUT 1
BOARD
....2 919-4025 ASSY, STX LP PA/COMBINER BACKER 1
BOARD(SBCM)
......3 007-0020-006 CAP,20pF,5%,50v,SMD,0603 1 C7
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 6 C4, C6, C10, C12,
C16, C18
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 8 C1, C2, C3, C8, C9,
C13, C14, C15
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 1 R6
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R2, R3, R8, R9, R14,
R15
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 4 R17, R20, R21, R22
......3 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 3 R5, R12, R18
......3 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 3 R1, R7, R13
......3 102-4321 RES,CHIP,4.32K OHMS,1/10W,1%,SMD 4 R4, R10, R16, R19
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 3 D1, D2, D3
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 3 U2, U5, U7
......3 216-1490 IC,OP AMP,LT1490,DUAL,R/R I/O,SMT 2 U3, U8
......3 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 3 U1, U4, U6
......3 413-1206 CHIP,TEST POINT,1206,SMD 3 TP1, TP2, TP3
......3 417-2838 HEADER 4-PIN .100 R.ANGLE LOCKING" 1 J1
......3 519-4025 PCB, STX LP PA/COMBINER BACKER BOARD 1

©2013 Broadcast Electronics

 - 153 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 959-4501-100 ASSY, SPLITTER/COMBINER, FM, STX LP,
5KW
..1 324-2500 LIGHTPIPE,0.197 DIA,0.5 LONG, PANEL MT. 4
..1 349-0020 SWITCH, ROCKER, DPST, 20A 1
..1 380-9006-001 FAN,WITH CONNECTOR,COUNTER 1
ROTATING,12V DC,120 MM SQ X 76 MM
....2 380-6307 FINGER GUARD,FAN,4.125 CENTERS 1
....2 380-9006 FAN,COUNTER ROTATING,12V DC,120MM X 1
76MM
....2 418-1105 CONN,PLUG,10-PIN,5X2,SAMTEC MINI- 1
MATE
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 8
AWG,GOLD,SAMTEC"
..1 400-0014 GROMMET,3/8IDX5/8ODFOR7/16HOLE 1
..1 400-0207 STRIP,QUIET SHIELD,.250x.375"" 1.1
..1 400-4200 GASKET, EXTRD EMI SHIELD 5.25
SILCON,ALUM,SILVR
..1 402-0000 TY-RAP 9
..1 402-0001 TY-RAP,T+B TY24M,1-1/4 DIA 2
..1 402-0833 CLAMP,CBL,1/4 2
..1 411-7086 TERM BLK FEED-THRU 1-4MM GRAY 2
..1 411-7866 TERM BLK,FEED-THRU,1-4MM GRN/YEL 1
..1 420-0500 SCREW,10-32X.375,BR PH 2
..1 420-3005 SCREW,5/16-18X1.000,S.S. BOLT 4
..1 420-4124 SCREW,4-40X1.500,S.S. PH 4
..1 420-6110 SCREW,6-32X.625,S.S. PH 4
..1 420-8106 SCREW,8-32X.375,S.S. PHH 5
..1 420-8121 SCREW,8-32X.375,BR PH 5
..1 420-8706 SCREW,8-32X.375,BRASS THUMB 1
..1 420-9720 RETAINER,NUT,OD:0.26,FITS SHAFT 5/32"" 4
..1 421-3003 5/16-18 S.S. HEX NUT 5
..1 421-3802 NUT,JAM,5/16-18,BRASS" 5
..1 421-6008 6-32 KEP NUT 2
..1 421-8028 NUT,JAM,1/2-28 UNEF-2B 1
..1 422-0110 SCREW,10-32 X 5/8,PPH,SEM,STEEL,ZINC 4
PLATING"
..1 422-6106 SCREW,SEMS 6-32 X 3/8 PAN PH. ST." 36
..1 423-0007 #10 LOCK INT TOOTH 2
..1 423-6002 #6 LOCK SPLIT 4
..1 423-8002 #8 LOCK SPLIT 5
..1 423-8006 #8 LOCK INT TOOTH 6
..1 423-9002 WASH,INT TOOTH,1/2 1
..1 426-3020 STUD,HIGH-STRENGTH,SST,5/16- 5
18,1.25"LONG"
..1 427-0009-300 CONNECTOR,MODIFIED,OUTPUT,STX 3/5 1
KW
..1 427-0010 ASSY,ADAPTOR 1 5/8 FLANGED 1
..1 441-4801 STOFF, 1/2 SNAP LOCK NYLON .062 PCB" 8
..1 441-6108 STOFF,MF,#6 X .500L,BRASS (NOTE) 13
..1 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 3.333
..1 469-0366 FINGER STOCK (NOTE!!!!!) 11
..1 471-4222 FRONT PANEL, STX LP,5KW COMBINER 1

©2013 Broadcast Electronics - 153 -

 - 154 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 471-4225 SAFETY SHIELD FOR ELECTRICAL 1
SOURCE STX LP
..1 471-4250-100 WELDMENT,CHASSIS,STX COMBINER 1
..1 471-4253-100 ENCLOSURE,STX COMBINER 1
..1 471-4256-200 COVER,INNER,NEW,STX COMBINER 1
..1 471-4257-100 COVER,TOP,STX COMBINER 1
..1 471-4261 STRAP,FAN,STX COMBINER 2
..1 486-7150 HANDLE, 4 X 1.375", BRASS, CHROME 2
PLATED, #10-32 THREADS"
..1 510-273 Foam tape 1/2 thick X 3/4 wide X 17' LONG 0.083
..1 540-1012-100 POWER SUPPLY, 12V 65W AC/DC 1
CONVERTER 2X4" STX LP"
..1 540-1012-501 POWER SUPPLY 12V 80/100W AC/DC 2X4IN 1
..1 594-0073 LABEL,WARNING ROTATING FANS 1
..1 594-0505 LABEL, WARNING-ONLY AUTHORIZED 2
PERSONNEL
..1 700-0130 LACQUER,INSP BLU F-1000 SENTRY 1
..1 849-2010-100 CBL,ASSY,.050 DOUBLE ROW 10 PIN 1
FEMALE IDC ASSEMBLY,28 INCH
..1 849-2526 CBL,ASSY,.050 DOUBLE ROW 26 PIN 1
FEMALE IDC ASSY,25.0 INCH
..1 919-4075 ASSY, STX LP PA/COMBINER LED BOARD 1
(SBCM)
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 4 C2, C3, C6, C9
....2 007-3923 CAP,CER,390pF,100V,5%,SMD 2 C4, C8
....2 007-4702-500 CAP,CER,47pF,50V,2%,SMD 2 C5, C7
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 1 C1
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R21, R24, R25, R26,
R27
....2 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 1 R22
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 2 R18, R20
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 2 R23, R30
....2 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 4 R6, R11, R13, R16
....2 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 1 R3
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 1 R29
....2 102-2210 RES,CHIP,221 OHMS,1/10W,1%,SMD 1 R2
....2 102-4021 RES,CHIP,4.02K OHMS,1/10W,1%,SMD 1 R19
....2 102-7150 RES,CHIP,715 OHMS,1/10W,1%,SMD 9 R4, R7, R8, R9, R10,
R12, R14, R15, R17
....2 216-7002 IC,MOSFET,2N7002LT1,SMD 5 Q1, Q2, Q3, Q4, Q5
....2 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 1 U3
....2 221-0358-001 DUAL OP AMP, SMD, SOIC8 1 U2
....2 231-3170 VR,LM317,SMD 1 U1
....2 325-0807 LED,DUAL,SUPER RED/GRN,SMD,0807 5 DS1, DS2, DS3,
(note) DS4, DS5
....2 340-0004 SW,JUMPER PROGRAMMABLE 1 P1
....2 417-0308 CONN,JACK,3-PIN,SMD 1 J2
....2 418-451 Diode, SMT, Zener, 5.1V Motorola 1 D1
BZX84C5V1LT1
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4075 PCB, STX LP PA/COMBINER LED BOARD 1

©2013 Broadcast Electronics

 - 155 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 919-4085-100 PCB, ASSY, STX LP PA/COMBINER 5-WAY 1
COMBINER
....2 007-1012 CAP,CER,10pF,50V,2%,SMD 3 C7, C14, C21
....2 007-1201 CAP,CER,12PF,50V,2%,SMD 9 C2, C3, C5, C9, C10,
C16, C17, C22, C24
....2 007-1512 CAP,CER,15pF,50V,2%,SMD 3 C6, C13, C20
....2 007-2200 CAP,CER,2.2pF,50V,.25pF,SMD 2 C12, C19
....2 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 3 C4, C11, C18
....2 007-3300 CAP,CER,3.3PF,50V,.25pF,SMD 1 C23
....2 007-3312 CAP,CER,33pF,50V,2%,SMD 3 C1, C8, C15
....2 040-3312-005 CAP,MICA,RF,33PF,500V,5%,SMT 1 C25
....2 046-0047 CAP,PTFE,RF,4.7PF,1000V,+/-0.5PF,SMT 1 C26
....2 091-1511 CAP,TRIMMER,3-10 PF,NPO,25V,SMD 1 C27
....2 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 3 R2, R10, R18
....2 105-0075 Chip Res,75 ohm 1W 1% SMD 2512 3 R1, R9, R17
....2 105-0102 RES, CHIP, 1K OHM, 1W, 5%, 2512 7 R5, R6, R13, R14,
R21, R22, R30
....2 105-0302 RES,CHIP,301 OHM,1W,1%,2512,SMD 15 R3, R4, R7, R8, R11,
R12, R15, R16, R19,
R20, R23, R24, R26,
R28, R29
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R25, R27
....2 360-4210 COIL,12 GA,9.45T,280nH 1 L15
......3 640-1200 WIRE,12GA,MAGNET 0.026
....2 366-0120-100 IND, 120NH, AIR, 5%, SMD, 1812 9 L1, L2, L3, L4, L5,
L6, L7, L8, L9
....2 417-0265 CONN,BNC,JACK,THREADED,PC EDGE 1 J1
MOUNT,LOW PROFILE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 2 J2, J3
MOUNT 50 OHM
....2 426-0000 PEM NUT,#10-32 KFS2-032 2
....2 519-4085-100 PCB, FAB, 5-WAY COMBINER 1
..1 919-4095-001 ASSY, STX LP COMBINER FILTER BOAR 1
(SBCM)
....2 007-0100-035 CAP, LYTIC, 100UF, 35V, 20%, LOW IMP, 1 C6
SMD
....2 007-0102 CAP,CER,CHIP,1000pF,50V,5%,SMD 4 C11, C12, C17, C18
....2 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 10 C1, C4, C7, C8, C10,
C13, C14, C16, C19,
C21
....2 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C9, C15
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 3 C3, C5, C20
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 2 R9, R25
....2 102-0152 RES,CHIP,1.5K OHM,0.1%,1/10W,0805,SMD 1 R20
....2 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 2 R12, R18
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 4 R11, R13, R14, R19
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 1 R3
....2 102-1200 RES,CHIP,121 OHMS,1/10W,1%,SMD 2 R2, R6
(NOTE)
....2 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 2 R17, R23
....2 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R1
....2 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R10

©2013 Broadcast Electronics - 155 -

 - 156 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
....2 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 2 R15, R21
....2 102-7521 RES,CHIP,75 OHMS,1/10W,1%,SMD 4 R4, R5, R7, R8
....2 178-5045 RES,TRMR,5K,20T,VERT 2 R16, R22
....2 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 2 U1, U3
....2 221-8361 IC, TRUE AVERAGE POWER DETECTOR 2 U2, U4
....2 320-0603 LED GREEN SMD 2 DS1, DS2
....2 350-197 INDUCTOR, SMT, POWER, 1uH 2 L1, L2
....2 417-0700 CONN,PCB MT,2PIN 1 J8
....2 417-0701 CONN,SMA FEMALE PC MOUNT 1 J3
....2 417-1102 CONN,HEADER,VERT,4-PIN,2X2,SAMTEC 1 J6
MINI-MATE
....2 417-1105 CONN,HEADER,VERT,10-PIN,5X2,SAMTEC 1 J4
MINI-MATE
....2 417-1701 STRAIGHT JACK RECEPTACLE,SMB PCB 1 J5
MOUNT 50 OHM
....2 418-0255 CONN,MALE,4PIN 1 J2
....2 418-5010 CONN, 10 PIN, MALE, SMT, 0.050, KEYED, 1 J7
WITH LATCHES"
....2 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J1
WITH LATCHES"
....2 519-4095-001 PCB, STX LP COMBINER FILTER BOARD 1 PCB
..1 949-4101-100 CABLE,12GA BLUE,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-006 WIRE,AWG 12,STRANDED,LIGHT BLUE 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4101-200 CABLE,12GA BROWN,6 LG,STRIP-PUSH ON 1
(SBCM)
....2 410-0050 LUG,TERM,10-12GA,FEMSPADE 1
....2 601-1202-001 WIRE,AWG 12,STRANDED,BROWN 0.5
....2 611-3750 TUB,HT SHK,3/8 0.104
..1 949-4114-100 HARNESS,MAIN,STX COMBINER WITH -501 1
PS (SBCM)
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 410-1421 LUG,QUICK DISCONNECT #18-22 2
....2 410-2478 CRIMP TERMINAL,AMP 640707-1 10
....2 417-0053 SKT,CONN 641294-1 AMP 6
....2 417-0306 HSNG,3 POS,SL-156 2
....2 417-0606 HSNG,6 POS,SL-156 1
....2 417-2806 CONNECTOR, HOUSING, 4-PIN .001" 1.000 "
"
....2 417-2816 PIN, CRIMP .100,22-24 GA" 4
....2 417-4025 HOUSING,4-PIN,AMP 640250-4 1
....2 418-0240 PLUG,FEM,4PIN 1
....2 418-0701 CONN,HOUSING,2 PIN 1
....2 418-1102 CONN,PLUG,4-PIN,2X2,SAMTEC MINI-MATE 1
....2 418-2024 PIN,FEMALE CRIMP,.100,20-24 4
AWG,GOLD,SAMTEC"
....2 601-1800-054 WIRE,AWG 18,STRANDED,GREEN/YELLOW 1.917
....2 601-2209 WIRE,AWG22,7/30 WHT 18.167
....2 611-2500 TUB,HT SHK,1/4 0.167
....2 611-3750 TUB,HT SHK,3/8 0.208

©2013 Broadcast Electronics

 - 157 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
..1 949-4115 CABLE,RFL PWR,STX COMBINER,3KW/5KW 1
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1702 RIGHT ANGLE CRIMP TYPE PLUG,SMB,50 1
OHM
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 3
..1 949-4116 CABLE,FWD PWR,STX 1
COMBINER,3KW/5KW
....2 410-0065 LUG,TERM #6 RING CRIMP #22 AWG 1
....2 417-1703 Straight Crimp Type Plug,SMB,50 ohm 1
....2 417-8030 CONN,PLUG,RT ANG,SMA,HEX CRIMP 1
....2 601-0022 WIRE,AWG22,BUSS 0.229
....2 621-1359 CBL,COAX,RG316/U,50 OHM 2.5
..1 959-4005-105 ASSY, STX SPLITTER 5 1
....2 469-0021 FINGER STOCK,LAIRD 97-550,24 LONG" 0.145
....2 469-5500 FINGER STOCK,TECH-ETCH 250P37-16-02 0.5
....2 471-4255-100 COVER,SPLITTER,STX COMBINER 1
....2 919-4005-105 ASSY,5-WAY,STX LP PA/COMBINER 1
SPLITTER BOARD
......3 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 -2 REMOVE R65 & R66
(SCRAP AGAINST
40500)
......3 417-3120 CONN, BNC RIGHT ANGLE DUAL PORT PCB 1 J3
MOUNT/SHIELDED
......3 919-4005-103 ASSY,3-WAY,STX LP PA/COMBINER 1
SPLITTER BOARD(SBCM)
........4 003-0105 CAP, CER, 1UF, 100V, 1812, 20%, SMD 4 C27, C28, C30, C33
........4 007-1024 CAP,CER,.001uF,50V,10%,SMD 7 C36, C48, C55, C60,
C64, C74, C81
........4 007-1034 CAP,CER,0.01uF,50V,10%,SMD 4 C50, C68, C70, C75
........4 007-1034-001 CAP,CER,.01UF,10%,50V,0603,SMD 16 C6, C7, C8, C9, C11,
C12, C13, C14, C15,
C16, C17, C18, C19,
C20, C21, C22
........4 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 14 C1, C2, C3, C4, C5,
C10, C23, C24, C25,
C26, C29, C34, C84,
C85
........4 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 12 C35, C39, C40, C44,
C51, C61, C65, C67,
C69, C78, C79, C82
........4 007-1054-001 CAP,CER,1UF,10%,10V,X7R,0805,SMD 1 C47
........4 007-1075-100 CAP, CER CHIP, 10 UF, 10V, 1206 2 C32, C80
........4 007-2202-050 CAP,CER,22 PFD,5%,50V,1206,SMD 1 C77
........4 007-2202-500 CAP,CER,22pF,50V,2%,SMD 1 C56
........4 007-2702-500 CAP,CER,27pF,50V,2%,SMD 1 C58
........4 007-3912 CAP,CER,39pF,50V,5%,SMD 1 C62
........4 007-6800-500 CAP,CER,6.8pF,50V,.25pF,SMD 10 C37, C38, C41, C42,
C45, C46, C49, C52,
C53, C54
........4 007-6812 CAP,CER,68pF,50V,2%,SMD 1 C43

©2013 Broadcast Electronics - 157 -

 - 158 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 009-1032-050 CAP,CER CHIP,1000PF,50V,5% 1 C63
........4 070-1065 CAP,TANT,10UF,20V,10%,SMD 4 C31, C59, C66, C73
........4 102-0000 RES,CHIP,0 OHM,0805,SMD 12 R43, R46, R47, R49,
R50, R130, R131,
R132, R134, R136,
R137, R143
........4 102-0100 RES,CHIP,10.0 OHMS,1/10W,1%,SMD 2 R94, R95
........4 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R1, R2, R34, R38,
R111, R146
........4 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 9 R5, R19, R24, R53,
R70, R92, R112,
R114, R138
........4 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 26 R16, R52, R74, R75,
R77, R78, R79, R80,
R81, R85, R87, R89,
R90, R98, R100,
R102, R104, R106,
R119, R122, R123,
R124, R125, R126,
R147, R151
........4 102-1003 RES,CHIP,100K OHMS,1/10W,1%,SMD 12 R54, R82, R84, R88,
R93, R97, R99,
R139, R141, R142,
R149, R150
........4 102-1004 RES,CHIP,1.00M OHMS,1/10W,1%,SMD 4 R56, R73, R127,
R140
........4 102-1500 RES,CHIP,150 OHMS,1/10W,1%,SMD 1 R68
........4 102-1503 RES,CHIP,150K OHMS,1/10W,1%,SMD 2 R83, R144
........4 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 3 R7, R13, R55
........4 102-2001 RES,CHIP,2.00K OHMS,1/10W,1%,SMD 16 R3, R4, R8, R9, R11,
R12, R15, R21, R23,
R26, R28, R30, R32,
R35, R37, R40
........4 102-2212 RES,CHIP,22.1K OHMS,1/10W,1%,SMD 1 R121
........4 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 1 R76
........4 102-2273 RES,CHIP,2.2M OHM,1/10 W,5% 1 R148
........4 102-2410 RES,CHIP,243 OHMS,1/10W,1%,0805,SMD 1 R96
........4 102-2431 RES,CHIP,2.43K OHMS,1/10W,1%,SMD 6 R42, R44, R45, R71,
R107, R108
........4 102-2491 RES,CHIP,2.49K,1/10W,1%,SMD 1 R101
........4 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 1 R105
........4 102-3160 RES,CHIP,3.16K OHMS,1/10W,1%,SMD 1 R59
........4 102-3323 RES,CHIP,332K OHMS,1/10W,1%,SMD 1 R120
........4 102-3570 RES,CHIP,357 OHMS,1/10W,1%,SMD 1 R117
........4 102-4223 RES,CHIP,422k OHM,1%,1/10W,0805,SMD 1 R86
........4 102-4320 RES,CHIP,432 OHMS,1/10W,1%,SMD 1 R91
........4 102-5491 RES,CHIP,5.49K,1/10W,1%,SMD 1 R57
........4 102-6409 RES,CHIP,64.9 OHMS,1/10W,1%,SMD 1 R110
........4 104-1001 RES,CHIP,1.0 K OHM,1%,1/16W,0603,SMD 3 R58, R116, R118
........4 105-0018 RES,CHIP,18.2 OHM,1W,1%,2512,SMD 1 R103
........4 105-0051 RES, CHIP, 51 OHM, 1W, 5%, 2512 7 R60, R61, R62, R63,
R64, R65, R66

©2013 Broadcast Electronics

 - 159 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 105-0294 RES,CHIP,294 OHM,1W,1%,2512,SMD 3 R109, R128, R129
........4 198-1054 TRMR,10K OHMS,TOP ADJ,SMD (N) 1 R69
........4 198-2024 TRMR,2K OHMS,TOP ADJUST,10 1 R115
TURN,SMD
........4 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 5 D2, D3, D4, D5, D6
........4 210-4031 TSTR, BIPOLAR POWER, NPN, NJT4031N, 1 Q14
SMD
........4 210-7805 REG, 5V, 1A, 3 TERMINAL, POSITIVE 1 U14
VOLTAGE, SMD, D-PAK
........4 210-8504 RF POWER TRANSISTOR, PD85004, SMD, 1 U11
SOD-89
........4 216-0339 IC,LM339AM,VOLTAGE COMPARATOR,SMD 1 U12
........4 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 1 U16
........4 216-1963 LINEAR TECH LT1963 1.5 AMP LDO 1 U10
ADJUSTABLE REGULATOR
........4 216-2343 MOSFET,P CHAN,2A,30V,.08 OHM,SOT-23 1 Q6
........4 216-4013 IC,MC14013BD DUAL D FLIP FLOP,SMD 1 U20
........4 216-5235 ANALOG DEVICES AD5235 DIGITAL POTS 2 U3, U19
........4 216-6549 IC, DUAL LVDS DIFFERENTIAL DRIVERS 1 U1
AND RECEIVERS, TSSOP16
........4 216-7002 IC,MOSFET,2N7002LT1,SMD 19 Q1, Q2, Q3, Q4, Q5,
Q7, Q8, Q9, Q10,
Q11, Q12, Q13, Q15,
Q16, Q17, Q18, Q19,
Q20, Q21
........4 216-7400 IC,SN74AHCT1G00DBV,2-INPUT POS 1 U7
NAND,DBV,SMD
........4 216-7414-001 IC, SCHMITT TRIGGERED SINGLE GATE 5 U4, U6, U9, U17,
INVERTER,SC-70 U18
........4 216-7490 ANALOG DEVICES AD7490 16 CHAN A/D 1 U2
........4 216-8574 IC, ADI AD8574 4CHANNEL R/R OP AMP 1 U8
........4 220-7425 IC, COMPARATOR, LMV7219, 7NS, 2.5-5V, 1 U21
R-R
........4 221-8361 IC, TRUE AVERAGE POWER DETECTOR 1 U15
........4 224-0324 IC,LM324,QUAD OP-AMP,SMD 1 U13
........4 224-4000 GATE, SINGLE, XOR, 2 INPUT, 8NS TPD 1 U5
........4 231-0136 IC,VOLT REF,2.5V,8-PIN SOIC 1 D1
........4 320-0603 LED GREEN SMD 4 DS1, DS2, DS3, DS4
........4 340-0004 SW,JUMPER PROGRAMMABLE 2 P4, P5
........4 350-188 INDUCTOR, 1210 1uH CHIP 2 L6, L7
........4 366-0010-010 INDUCTOR,10 NH,5%,0805CS- 1 L8
100XJB,0805,SMD
........4 366-0068-200 IND,68NH,CER WW,0805,5%,SMD 1 L9
........4 366-0100 IND,100NH LAMINATED CER,0805,SMD 1 L10
........4 366-0180-001 INDUCTOR, 180nH, 10%, SMD, 1008 5 L1, L2, L3, L4, L5
........4 413-0603 Chip,Test Point 0603 SMD 3 TP1, TP2, TP3
........4 413-1206 CHIP,TEST POINT,1206,SMD 1 TP6
........4 413-1520 TERM,TURRET SINGLE, .109 L, .078" BASE" 1 TP5
........4 417-0037-001 BNC,R ANGLE PC MTG,SHIELDED 2 J6, J7
........4 417-0200 CONN,HEADER 20 PIN 0.2 J5, J8
........4 417-1050 .100,10 pin double row terminal strip" 1 J4

©2013 Broadcast Electronics - 159 -

 - 160 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
........4 417-3120 CONN, BNC RIGHT ANGLE DUAL PORT PCB 1 J2
MOUNT/SHIELDED
........4 417-4604 CONN, PCB MOUNTED RJ45 RIGHT ANGLE 1 J1
WITH LEDS
........4 418-5026 CONN, 26 PIN, MALE, SMT, 0.050, KEYED, 1 J11
WITH LATCHES"
........4 519-4005-103 PCB, STX LP COMBINER SPLITTER BOARD 1
..1 959-4015-105 ASSY, STX RF INPUT 5,BOURNS RES 1
....2 131-5080-001 RES,50 OHM,800W, BOURNS,5%,FLANGED 5
....2 360-4211 COIL,14 GA,7.65T, 130nH 1
......3 410-1552 LUG,TERM #8 RING CRIMP 16-22 1
......3 611-5000 TUB,HT SHK 1/2 1.25
......3 640-1400 WIRE,14GA,MAGNET 0.012
....2 360-4211-300 COIL, 14GA, 6.5T 2
......3 410-1552 LUG,TERM #8 RING CRIMP 16-22 1
......3 611-5000 TUB,HT SHK 1/2 1.25
......3 640-1400 WIRE,14GA,MAGNET 0.011
....2 420-6108 SCREW,6-32X.500,S.S. PH 20
....2 420-6506 SCREW,6-32X.375,S.S. PH FH 6
....2 422-6107 SCREW,SEMS 6-32 X 7/16 PAN PH.ST." 5
....2 423-6002 #6 LOCK SPLIT 20
....2 423-6011 #6 FLAT .310 X .160 X .030 20
....2 427-0067 CONNECTOR, N, THK PCB, STRAIGHT, PNL 5 J1, J2, J3, J4, J5
MTG
....2 440-0501 STANDOFF, 5/16 .060 SPACER" 1
....2 441-4202 STOFF, COPPER, .375D x 1.000" 5.000 " "
....2 441-5504 STOFF,SS 1/4 HEX X 7/16" LONG,MALE- 5
FEMALE 8-32"
....2 455-4000-100 HEATSINK,COMBINER,STX 1
....2 455-4001-100 PLATE,ALUMINUM,STX 3/5 KW 1
....2 463-4501 CONNECTOR, .060 COPPER STAR 1
....2 519-4015 PCB, STX LP PA/COMBINER RF INPUT 1
BOARD
....2 919-4025 ASSY, STX LP PA/COMBINER BACKER 1
BOARD(SBCM)
......3 007-0020-006 CAP,20pF,5%,50v,SMD,0603 1 C7
......3 007-1024 CAP,CER,.001uF,50V,10%,SMD 6 C4, C6, C10, C12,
C16, C18
......3 007-1044 CAP,CER,0.1uF,50V,10%,SMD note 8 C1, C2, C3, C8, C9,
C13, C14, C15
......3 102-0000 RES,CHIP,0 OHM,0805,SMD 1 R6
......3 102-1000 RES,CHIP,100 OHMS,1/10W,1%,SMD 6 R2, R3, R8, R9, R14,
R15
......3 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 4 R17, R20, R21, R22
......3 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 3 R5, R12, R18
......3 102-2214 RES,CHIP,2.21K OHM,1/10W,1% 3 R1, R7, R13
......3 102-4321 RES,CHIP,4.32K OHMS,1/10W,1%,SMD 4 R4, R10, R16, R19
......3 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 3 D1, D2, D3
......3 216-0830 IC,OP AMP,OPA830,SOT23-5,R/R OUTPUT 3 U2, U5, U7
......3 216-1490 IC,OP AMP,LT1490,DUAL,R/R I/O,SMT 2 U3, U8
......3 220-0035 IC,LM35DZ CELSIUS TEMP SENSOR 3 U1, U4, U6
......3 413-1206 CHIP,TEST POINT,1206,SMD 3 TP1, TP2, TP3

©2013 Broadcast Electronics

 - 161 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
......3 417-2838 HEADER 4-PIN .100 R.ANGLE LOCKING" 1 J1
......3 519-4025 PCB, STX LP PA/COMBINER BACKER 1
BOARD

©2013 Broadcast Electronics - 161 -

 - 162 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4201-100 STX 2KW AC DIST,180-
260VAC,1PH,OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 2
..1 402-0000 TY-RAP 4
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1
..1 421-0102 10-32 KEP NUT 9
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5496 FILLER PLATE,POWER DISTRIBUTION,STX 3
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499-002 PANEL,POWER DISTRIBUTION,STX 2KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 3
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125

©2013 Broadcast Electronics

 - 163 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4301-100 STX 3KW AC DIST,180-
260VAC,1PH,OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 3
..1 402-0000 TY-RAP 5
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1
..1 421-0102 10-32 KEP NUT 10
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5496 FILLER PLATE,POWER DISTRIBUTION,STX 2
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499 PANEL,POWER DISTRIBUTION,STX 3KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 4
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125

©2013 Broadcast Electronics - 163 -

 - 164 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4301-200 STX 3KW AC DIST,180-260VAC,3PH
DELTA,OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 3
..1 402-0000 TY-RAP 5
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1
..1 421-0102 10-32 KEP NUT 10
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5496 FILLER PLATE,POWER DISTRIBUTION,STX 2
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499 PANEL,POWER DISTRIBUTION,STX 3KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 4
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125

©2013 Broadcast Electronics

 - 165 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4501-100 STX 5KW AC DIST,180-
260VAC,1PH,OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 5
..1 402-0000 TY-RAP 7
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1
..1 421-0102 10-32 KEP NUT 12
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499-001 PANEL,POWER DISTRIBUTION,STX 5KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 6
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125
..1 949-4117 HARNESS,ADD ON FOR 5KW STX POWER 1
DISTRIBUTION
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 4
....2 601-1200 WIRE,AWG12 19/25 BLK 1.417
....2 601-1202 WIRE,AWG12 19/25 RED 1.417

©2013 Broadcast Electronics - 165 -

 - 166 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4501-200 STX 5KW AC DIST,180-260VAC,3PH
DELTA,OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 5
..1 402-0000 TY-RAP 7
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1
..1 421-0102 10-32 KEP NUT 12
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499-001 PANEL,POWER DISTRIBUTION,STX 5KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 6
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125
..1 949-4117 HARNESS,ADD ON FOR 5KW STX POWER 1
DISTRIBUTION
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 4
....2 601-1200 WIRE,AWG12 19/25 BLK 1.417
....2 601-1202 WIRE,AWG12 19/25 RED 1.417

©2013 Broadcast Electronics

 - 167 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4501-300 STX 5KW AC DIST,311-449VAC, 3PH WYE,
OPTIONAL
..1 341-0078 CKT. BRKR,20A,2 POLE,250VAC 5
..1 402-0000 TY-RAP 7
..1 410-0030 LUG,1/4-MTG,1/0-6,SOLDERLESS 1
..1 412-0050 TERM BLOCK,GOULD 63133 1.333
..1 421-0102 10-32 KEP NUT 12
..1 421-1110 RIV,1/8X.44L .188-.250GR CLOSE 1
..1 471-5497 GUARD,AC INPUT,STX 1
..1 471-5498 GUARD,BREAKER,STX 1
..1 471-5499-001 PANEL,POWER DISTRIBUTION,STX 5KW 1
....2 471-5499-009 PANEL,POWER 1
DISTRIBUTION,STX,UNSCREENED
..1 500-183 Screw, 6-32 x 1/4 phillips pan head Black Zinc" 20
..1 949-4109 HARNESS,MAIN,STX POWER 1
DISTRIBUTION (SBCM)
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 8
....2 601-1200 WIRE,AWG12 19/25 BLK 2.125
....2 601-1202 WIRE,AWG12 19/25 RED 2.125
....2 601-1202-054 WIRE,AWG 12,STRANDED, GREEN/YELLOW 0.833
..1 949-4111 CABLE,AC INPUT,STX 1KW (SBCM) 6
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 3
....2 603-0012 WIRE, CAROL, 12AWG, 3C, SJ00W, AC 7
CABLE
....2 611-5000 TUB,HT SHK 1/2 0.125
..1 949-4117 HARNESS,ADD ON FOR 5KW STX POWER 1
DISTRIBUTION
....2 410-0060 LUG,TERM,#10 RING CRIMP 10-12G 4
....2 601-1200 WIRE,AWG12 19/25 BLK 1.417
....2 601-1202 WIRE,AWG12 19/25 RED 1.417

©2013 Broadcast Electronics - 167 -

 - 168 -

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 909-4020 STEREO GENERATOR OPTION, STX LP
..1 597-4104 STX STEREO GENERATOR INSTALLATION 1
APPLICATION GUIDE
..1 919-4020 ASSY, PCB, STEREO GENERATOR, STX LP 1
(SBCM)
....2 007-1022 CAP,CER,100pF,50V,2%,SMD 8 C8, C9, C13, C18,
C22, C34, C37, C62
....2 007-1040-025 CAP,CER,.1UF,+80,-20%,25V,0603,SMD 31 C5, C10, C14, C15,
C19, C20, C23, C24,
C25, C26, C28, C30,
C31, C33, C36, C38,
C39, C40, C42, C44,
C46, C47, C49, C50,
C51, C53, C54, C57,
C59, C63, C64
....2 007-1054-100 CAP , CER, CHIP, 1uF, 16V, 10%, X7R, SMD 2
0603 C1, C3
....2 007-3923 CAP,CER,390pF,100V,5%,SMD 2 C2, C4
....2 009-0204 CAP,TANTALUM 1
CHIP,47UF,POLAR,10%,6V,SMD C11
....2 070-1065 CAP,TANT,10UF,20V,10%,SMD 17 C6, C12, C17, C21,
C27, C29, C32, C35,
C41, C43, C45, C48,
C52, C55, C56, C58,
C61
....2 102-0000 RES,CHIP,0 OHM,0805,SMD 5 R19, R25, R27, R35,
R61
....2 102-1001 RES,CHIP,1.00K OHMS,1/10W,1%,SMD 6 R1, R3, R17, R18,
R55, R65
....2 102-1002 RES,CHIP,10.0K OHMS,1/10W,1%,SMD 20 R12, R20, R29, R30,
R33, R34, R40, R41,
R42, R43, R44, R45,
R48, R49, R50, R58,
R59, R60, R62, R63
....2 102-1133 RES,CHIP,110 OHMS,1/10W,1%,SMD 2 R32, R36
....2 102-1214 RES, CHIP, 1.21K OHM, 1/10W, 1% 4 R6, R9, R13, R22
....2 102-1432 RES, CHIP, 14.3K, 1/10W, 1%, SMD 2 R15, R66
....2 102-2000 RES,CHIP,200 OHM,1/10 W,1% SMD 4 R2, R31, R52, R64
....2 102-2743 RES,CHIP,274 OHM,1/10W,1%,SMD 1 R53
....2 102-3012 RES,CHIP,30.1K,1/10W,1%,SMD 2 R16, R67
....2 102-6193 RES,CHIP,619 OHM,1/10W,1% 1 R51
....2 102-8250 RES,CHIP,825 OHMS,1/10W,1%,SMD 8 R7, R8, R10, R11,
R14, R21, R23, R24
....2 104-2000 RESISTOR,2Kohm,1/16W,1%,SMD,0603 2 R4, R5
....2 204-0914 DIODE,SWITCHING,MMBD914LT1,SMD 4 D1, D2, D3, D4
....2 216-1796 IC, STEREO DAC 24BIT 200KSPS PCM1796 1 U6
....2 216-1803 IC,SINGLE ENDED,ANALOG-INPUT 24- 1
BIT,96-KHZ STEREO A/D CONVT U5
....2 216-3904 TSTR,MMBT3904LT1,NPN,SMD 2 Q1, Q2
....2 216-4382 IC,TWO CHANNEL, ASYNC SAMPLE RATE 2
CONVERTER W/DIG REC AND TX U3, U8
....2 216-8676 IC, AD8676ARMZ, DUAL, R-R OP AMP, SMD 3 U1, U2, U7

©2013 Broadcast Electronics

 - 169 -

....2 216-9301 IC,ULTRALOW-NOISE, HIGH PSRR, FAST 2

LDO LINEAR VOLTAGE REG U4, U9
....2 320-0603 LED GREEN SMD 7 DS1, DS2, DS3,
DS4, DS5, DS6,
DS15
....2 367-1128 XFMR, 5MHz-120MHz SMD 1 T1
....2 391-1689 OSC 3.3V PROG CMOS TRI ST 25PPM, 1
16.896 MHZ Y1
....2 413-0603 Chip,Test Point 0603 SMD 6 TP2, TP3, TP9,
TP10, TP11, TP12
....2 417-2205 CONN, HEADER, 2X20 RIGHT ANGLE THRU 1
HOLE, .050 PITCH TFML J1
....2 519-4020 PCB, STEREO GEN OPTION, STX LP 1

BOM PART NO. DESCRIPTION QTY REF. DES.

LEVEL
0 979-4100 KIT, OPTION, STX AIR FILTER
..1 407-0178 FILTER, AIR, STX 1
..1 471-4263 WELDMENT,AIR FILTER COVER 1

©2013 Broadcast Electronics - 169 -

- 170 -

12 RF Technical Services Contact Information

RF Technical Services -
Telephone: (217) 224-9617
E-Mail: [email protected]
Fax: (217) 224-6528
web: www.bdcast.com

13 Drawings
The following pages present the STXLP drawings.

©2013 Broadcast Electronics

 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 6-23-09 RELEASE TO PRODUCTION JTB DWK -----

+5V
C12

J1A C5 R7 .1uF
1 TOP 2 GND
COMP

8
PORT
100K
10uF

+
R1 U1A R134
A 2 1 A
10K
AD8676ARZ
100

-
GND
R8 3
GND 100K C44 C80 +8VA +5V

4
10pF L1
U10
.1uF 1 MC78L05 3
C9 GND GND IN OUT
R9
-5V
PK DET 10uH

GND
C59 C60
1K 100uF
R51 10uF
GND *

2
0 D3
NOT PLACED
+12VA C1 GND GND
1 3 GND

MMBD4148 .1uF GND

J1B C8 +12VA
R13 C2
3 BTM 5
SCA1 2

8
PORT
100K R2
.1uF 10K D4 +12VA
U1B R135 .1uF +8VA +6V

+
4 R3 7 GND
10K U2A 1 1 3 5 L5
5
AD8676ARZ 100 R4 U11
LM393M R5
HSMS-2800 MC78L06

-
R10 6 C102 10K 1 3
GND 3 499K U2B 7
100K 10pF MOD_A2D B4 PAGE 2 IN OUT
10uH

GND
GND LM393M
+5V +5V C20 GND C58 C7
6 100uF
C10 GND 10uF
R11

2
.1uF GND
R6 C3 GND GND
1K C4 C6 C14 C17 -12VA GND
* 10uF .1uF 10uF
R52 .1uF 100K
GND
GND .1uF
0 GND

-5V -5V

46

45

35

36
+5V
C19 R15
+5V
C21

VA-

VA-
VA+

VA+
1 47
IN1 OUT1
+12VA
J3A 1K
C15 R19 R23
.1uF +3.3V +5V
1 TOP 2 GND 42 44
IN2 OUT2 .1uF
SCA2
8

PORT
1K 2 GND

8
100K
.1uF R29
+

R30 U4A R136 39 U3 37 1

2 10K 1 IN3 OUT3 RX+ J4A

+
AD8676ARZ CS3308 1K U6A 1
100
R38 2
-

OP262 J4B
GND R18 RX-
GND 3 C71 C103
32
IN4 OUT4
34
RIGHT MONO

-
100K
4

10pF 1K 3
J5 3
J4C

4
R62
29 27 1
IN5 OUT5 GND
.1uF GND
-5V
C16 GND 1K C23 4
J4D
B R21 -5V B
22 24 2
IN6 OUT6 5
1K R22 E1 J4E
5.1pF

EXCITER TO STEREO GEN

* R53 P5
GND 19 17 3 6
METER IN7 OUT7 HDR3 4.99K E2 J4F
0
R84 7
12 14 J4G
IN8 OUT8
1K LEFT MONO
-5V 8
J3B C11 J6 J4H
R17 R85
3 BTM 5 1
RDS PORT
9
J4I
.1uF
100K
SCK
5
SCI/CCLK ENOUT
8
1K
B2 PAGE 1 METER
R86 U4B R137
4 7 2 10
10K J4J
AD8676ARZ 100
5 6 P6
SDO SDA/MOSI 11
GND R14 6 C104 +3.3V 3 J4K
100K 10pF
HDR3
GND
XPCS
7
AD0/CS VD
10 MOD TO VCO 12
J4L
GND
R16 C13 3 C45 13
J4M
D RESET
.1uF
1K 14
4 9 E6 J4N
* C MUTE DGND
GND R54
15
0 GND
S J4O
R49 N
A2 PAGE 2 16
J4P
+5V 2 48
10K C48 REFI1 REFO1
GND
3

D6 10pF 41 43
REFI2 REFO2
MMBD914LT1 R50 C61
1

6
40 38
19 KHz J12A C18 R48
10K
.1uF
REFI3 REFO3
SGPCS
17
J4Q
1 TOP 7 U6B
PILOT OUT PORT OP262 31
REFI4 REFO4
33
18
.1uF
100 D2ACS J4R
1VPP 2 5
30 28 19
3

D7 REFI5 REFO5 A2DCS J4S

MMBD914LT1 GND
GND
1

20 J4T
21 23 SRC2
REFI6 REFO6
-5V
21
SCK J4U
20 18
REFI7 REFO7
22
J4V

EXCITER TO STEREO GEN

SDI
11 13
REFI8 REFO8
23
SDO J4W
C GND GND C
24

VA+

VA+
J4X

VA-

VA-
CSDI
RF OUT
25
+5V +5V CSDO J4Y

25

26

16

15
J12B
26 J4Z
3 BTM CSCK
PORT
RF_OUT
C52 C55 C62 C63 27
J4AA
COFS
4 10uF .1uF 10uF
.1uF
28
5 PILOT J4AB

-5V -5V 29 J4AC

SG_OUT
GND

30
SGCLK_EN J4AD

31
J4AE
J14
32
J4AF
2 6
+ RX+ GND
33
SPARE 2 J4AG
- R92
3 U20B 7 6
RX- 34
AES AD8676ARZ 1.74K
SPARE 3 J4AH
R88 C97
1 5 U15B 7 RST
35
J4AI
S +12VA
AD8676ARZ 0
10uF 36
R12 R130 SPARE 5 J4AJ
4 5 6 GND 5 *
100K
3

37
D8 +12VA SPARE 6 J4AK
GND
1

R87 MMBD914LT1 GND C74 C73

GND 38
C70 SPARE 7 J4AL
100
5.1pF R95
3

.1uF GND 39
2 SPARE 8 J4AM
D9
8

J15 J7 511
100uF +12VA
1

MMBD914LT1 40
1 +12VA SPARE 9 J4AN
R98
+

U20A 1 C78
2 R89 C72 -12VA
+
3

L+ AD8676ARZ 1.74K
10K R90 D10
2 R131
-

-
1

634 MMBD914LT1 3 C79 511 .1uF GND

3 R91 2
LEFT P2
4

8
L- 100uF
3 100
+12VA R20 GND C98

+
U15A R138
3

1 100K 1
S HDR3
D11 -12VA .1uF GND
AD8676ARZ 0
3

MMBD914LT1 10uF

-
GND R139
4 5 6 GND D12 3
C106 *
1

4
R93 MMBD914LT1 -12VA
COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
C75 6 GND
GND 100 C107
-12VA .1uF GND
3

D PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

R140
J16 J8 100uF
D13
+12VA
U21B 7 information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
SEE BOM
1

MMBD914LT1 AD8676ARZ 5.1pF

1 1.74K information is submitted in confidence
R141 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
and neither this document nor the
+ 2 C77 -12VA 5 DESIGNER(S)
919-4000
3

R+ R96 217/224-9600 FAX 217/224-9607

R94 511 information disclosed herein shall be
2 D14
10K
- reproduced or transferred to other
1

MMBD914LT1 R31
3
634 R97 DK
RIGHT R- P3
3
100uF 100K
+12VA TEST GND STUD
documents or used or disclosed to
FINISH
100 TITLE
C108 others for manufacturing or for any
GND
3

1
S HDR3
D15
TP3 other purpose except as specifically
authorized in writing by BROADCAST
SCHEMATIC, STX LP EXCITER
1

MMBD914LT1 .1uF GND

4 5 6 GND 2 ELECTRONICS, INC. DATE
8

-12VA 6-23-09 TYPE SIZE DWG. NO. REV

R142 S D 919-4000
+

TOLERANCE (DECIMAL) U.O.S.

GND
U21A 1 1
MH1
A
AD8676ARZ .x + .030 .xxx + .005 MFG. NEXT ASSY.
1.74K
1
R143
-

MH2
3
.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET
1 OF
3
511
C109 1
4

MH3
R32
100K GND
GND
-12VA .1uF GND
GND

1 2 3 4
 1 2 3 4

6
PLL REVISIONS
1
A
7 U16B REV DATE DESCRIPTION DFTSMN ENGR ECN
OPA227 A 6-26-09 RELEASE TO PRODUCTION JTB DWK -----
P10 R99
2 +12VA
5
C68
1K
GND
3 +3V
N
HDR3
B R27 GND .1uF
PLL +6V
C22
+3.3V
J10 1K 2
R172 C41

8
100K R40
1-2 75 KHz GND
1 U16A +3.3V
C38
+3.3V
10uF
GND
1K
GND 1uF GND
R101 OPA227

2-3 125 KHz 1K

3
C35
GND
.1uF
C36
R102 R39 +3.3V DS2

4
GRN +3.3V
OFF 300 KHz 49.9 0 GND GND .1uF ADF-4110 .1uF GND R35
1 2
R104
C131+12VA 0 1
Rset Vp
16
C81
A 200 A
10uF D
C33 C39 R37 C37 +3.3V +3.3V
R36 R105
+12VA GND .1uF C83
2
CP DVdd
15
R106 C56 C57
GND
C29 1000uF 4700uF 4700uF 49.9 475 0 10K
C82 .1uF GND R34
2 C105 100uF 3 14 G .1uF .1uF
R100 CPgnd MUXOUT

8
GND GND
GND Q3
.1uF 2.74K
1M C84 2N7002
GND 1 U24A GND 4 13 S 25AA640A
D2 PAGE 2 VC
OPA227
* GND Agnd LE PLLCS 100uF

R26
C32 1 8
L4 R25 CS VCC
C27 4.22K 3 5 12 GND
180nH 357 RFinB DATA SDO GND

4
10pF
RF OUT TO PA R107 1000pF
C31
SDI
2
SO HOLD
7
Z
GND 49.9 6 11
RFinA CLK SCK
C24 L2 L3 3 6
1000pF WP SCK SCK
GND GND +3.3V GND
1 2 7 10
RF_OUT AVdd CE
100nH 270nH Y1
C34 4 5

4
1000pF U17 VSS SI SDO
C25 C26 C30 C85 C86 4 1 8 9
R108 VCC VC REFin Dgnd

C
5.6pF Q2 2 3 1 GND
15pF B MSA-1105
GND .1uF U9
BFG541 100 GND

E
GND
1000pF R110 R109 1000pF 1000pF U5
R28 75 75 3 2
R111 10MHZ OUT GND

2
3

1
GND GND 4.22K RF R33
GND
12dB 150
10.000MHZ GND 10K C128
E3 E4 E5
GND
GND C3 PAGE3
GND
C28 R44
R24 GND .1uF 3.01K
100 1000pF
L6 R58 +3.3V
+3.3V D
10uH R57 C53
10K
GND
GND Q5
4.22K
1 .1uF GND
2N7002

5
C67 C87 G EN

XPCS U8

+
+12VA
4
.1uF 10uF S NCTSZ125
SGCLK_EN C4 PAGE1
GND GND GND EECS

-
CSCK 2
GND D2ACS A

3
C43 R112
+3.3V 100K A2DCS
CSDI
SGPCS
C4,D4 PAGE1 GND
R145 CSDO +3.3V
GND .1uF
1K PLLCS R68
R56 R146
C

GND SRC2 A
Q6 B R65
10K
1K C50
E

10K +3.3V B
MMBT2222A R60
10K R66
C99 C C76
+3.3V 10K R61 .1uF
B 10uF 10K B
GND R67
Q4 C46 C49
3

10K D .01uF
D S

2N7002
R147 .1uF 10K R69 C96
1
G R83 .1uF EXCITER TO CONTROL
2

GND S
1K 10K C51
10K

64

63

62

61

60

59

58

57

56

55

54

53

52

51

50

49
.1uF GND .01uF
+3.3V GND
J2A

CSCK

VDDCORE
CSDO

CSDI

RG0

RG1

RF1

RF0

VDD

OC8

OC7

OC6

OC5

OC4

OC3

OC2
1
GND +3.3V EXC_UART_RX TO CONT UART TX
DS1
2 J2B
R82
2 1 COFS
1
COFS PGC2
48 EXC_UART_TX TO CONT UART RX
200
2 47 MOD_A2D
3 J2C
AN16 PGD2
GRN

DS7
3
AN17 OC1
46 4 J2D
+12VA +6V +5V GND GND R81 4 45
2 1 SCK SCK2 IC4
INT_OUT
5 J2E
R41 R42 200
R43 R149 R148 5 44
SDI SDI2 IC3
2K 806 604 GRN 6 J2F
604 2K
6 43 INT_IN
SDO SDO2 IC2

DS3 DS4 DS5 7 J2G

2
2

DS8 7 42
DS9 MUTE
2

GRN MCLR IC1

GRN GRN GRN GRN R80
1
1

8 41 8 J2H
1

SS2 VSS FAILSAFE

10K R132
9 40
GND GND GND Z
VSS
U7
OSC2
TX_ON
9 J2I
-5V -12V * R133
10 39
VDD OSC1
R79
DSP1C33FJ128GP306
0 TX_OFF
10 J2J
11 38
AN5 VDD
10K
R78 11 J2K
10K
12
AN4 SCL1
37 PLL_LOCK EXC PLL LOCK
13
AN3 SDA1
36
FAULT_OUT
12 J2L
R46
14 35
13 TP1 AN2 U1RTS 13 J2M
LED_FAULT_OUT
+6V R47 +3.3V 15 34 +3.3V
PGC3 U1RX
DS6 C88 14 J2N
13 16 33
R55 R113 PGD3 U1TX
8 1 2 1 +3.3V
IN OUT
.1uF
15 J2O +5V3
C90 13 U18 200 R63 GND

U2CTS

U2RTS
AVDD
PGC1

PGD1

U2RX
AVSS

U2TX
AN15
R114 C89 GND

TDO

VDD
10uF

TMS

TCK
VSS
R115

AN9
+5V4

TDI
5
SHDNn SENSE
2
5.62K
10uF GRN 16 J2P
10K
1K
GND 4

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32
GND
R116 1
3.16K GND_A1 GND
+3.3V Y2
GND

GND

GND

4
NC 19.456MHz
GND C47
GND 3 2
3

C C

GND .1uF GND

SPARE 6 SPARE 2
GND +5V
SPARE 7 SPARE 3
ADUM5242
GND C65
SPARE 8 1 8
RST VDD ISOV
U19 C100
4

100uF
SPARE 9 SPARE 5 GND .1uF
VIN

L7 2 7
VOA VIA
3
VOUT LM337IMP VIN
2
100uH
1
J17A -12V
3 6
ADJ

-5V -12VA -12V VOB VIB

C91 C93
C92 R129

R70

R72

R74

R76
R118 1uF

R71

R73

R75

R77
10uF
4700uF
121 R150
1

51 4 5
GND GND GND ISOGND
GND GND R59 51

10K

10K

10K

10K
GND_A1

10K

10K

10K

10K
+3.3V GND

HDR3
R117 U12
R122 51
365 D

3
R119 51 +8VA

GND 51 R120 VCO PWR

Q7 J21
+5V
R121 51 C66 ADUM5242
G 2N7002
+12VA 51 R123 2 J17B
+12VCO B4 PAGE2 INT_OUT
1 8
VDD ISOV
51 1
L8 S .1uF
GND
NOT PLACED

3 2 7
100uH
J17C +12V J18A GND VOA VIA
2
4
C40 C101 J17D GND J18B
3
VOB VIB
6
4700uF C42 100uF
3 VCO PWR
GND
.1uF +3.3V 4 5
J18C C116 GND ISOGND
GND R144 4 R45
GND *
J9A
*

1 GND GND_A1
GND U13
J18D 10K
+12VA GND J9B 2
R64
VC
* J9C 3
JTAG

+3.3V C111
J9D 4 GND

6 .1uF J9E 5
GND
+3V C54
1
J9F 6
7 U24B VIN
U14 3
ISL6002 GND GND .1uF COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
5
R152 2
GND
VOUT +12VA
GND
D 100K PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D
C118
D5 information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
100uF
+3V REG SEE BOM
2
4

3 1 information is submitted in confidence

4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
R124 and neither this document nor the DESIGNER(S)
GND
HSMS-2800 1
information disclosed herein shall be
919-4000 217/224-9600 FAX 217/224-9607
Q1
2.2K
reproduced or transferred to other
C94
C95
NJT403IN
documents or used or disclosed to
DWK
100uF
3

FINISH
.1uF others for manufacturing or for any TITLE

R125 other purpose except as specifically SCHEMATIC, STX LP EXCITER

0 authorized in writing by BROADCAST
GND GND
ELECTRONICS, INC. DATE
+12VCO +12VA 6-23-09 TYPE SIZE DWG. NO. REV

R126 TOLERANCE (DECIMAL) U.O.S. D 919-4000

MFG. NEXT ASSY.
S A
.x + .030 .xxx + .005
*
.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 2 OF 3

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 6-26-09 RELEASE TO PRODUCTION JTB DWK ----

A A

+12VCO

B B

R157 R156
2.74K 51.1

C
B
Q8
C119 MMBT3904
100uF R158

E
20K

GND GND

+12VCO

R159
100
R160
150 C120
Q9
MMBFU310LT1 C122 C121 1000pF
100uF R162 R161

D
.1uF 3.32K GND L9
G 100 C123

S
2 1
GND GND
RF VCO OUT
L13 C124 270nH
1 10pF

C
HSMS-2800

D16 18pF C125

43nH

B
3

GND Q10
BFR93A
10pF R163
C127 R164

E
C126
1

HSMS-2800

1.4K
D17 33pF 200
3

R166 GND 1000pF R165

GND GND GND
GND 100
*
GND GND
MMBV3102
1

C129 C130 +12VCO

D18 * 270pF
3

R170 R167
L10 L11 100K
* R168
VC
1K 100uH 2.2uH
D19 D20
3

D24 D25 D22 D23

3

D26
3

D28
3
MMBV609LT1

MMBV609LT1
MMBV609LT1

MMBV609LT1

MMBV609LT1
MMBV609LT1

MMBV609LT1
C C
1SV242
1

2
1

2
1

R169
*
GND GND

D23 ONLY DIODE PLACED

+12VCO

C133 C132
100 .1uF

GND GND

COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.

D PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

information disclosed herein. This JTB 7-25-08 BROADCAST ELECTRONICS INC.
information is submitted in confidence
SEE BOM 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
and neither this document nor the DESIGNER(S)
information disclosed herein shall be 217/224-9600 FAX 217/224-9607
reproduced or transferred to other

documents or used or disclosed to

DWK FINISH
others for manufacturing or for any TITLE
other purpose except as specifically
SCHEMATIC, STX LP EXCITER
authorized in writing by BROADCAST

ELECTRONICS, INC. DATE

TYPE SIZE DWG. NO. REV

TOLERANCE (DECIMAL) U.O.S. S D 919-4000 3

.x + .030 .xxx + .005 MFG. NEXT ASSY.

.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 3 OF 3

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 9-23-09 RELEASE TO PRODUCTION JTB KM -----
B 10-9-09 ADD VSWR SHUTDOWN CIRCUIT JTB KM 11713

TO CONTROLLER TP1

GND GND
TP2 TP3
13

14

15
16

J1 +3.3V
GND

1
GND

U1
R1
100 1 16
2 RIN1- EN

A A
2 15
3 RIN1+ ROUT1 SPICLK

3 14
4 RIN2+ ROUT2 MOSI E17 E19
R2 E18 E20
100 4 13
5 RIN2- GND
C1 +5V
5 12
6 DOUT2- VCC AIR_INLET_TEMP
C2
.1uF +3.3V
GND
6 11 INPUT_OVERDRIVE
7 DOUT2+ DIN2
.1uF
AD7490 GND-A
7 10 COMB_OVER_TEMP
8 DOUT1+ DIN1 MISO R3 R4
1 28
RF_INPUT_FAULT VIN11 VIN12
+3.3V R5 2K 2K
R7 8 9 1K R6 +12V_FAN_SPLY
G

11 DOUT1- EN R8 R9
2 27
200 SPLITTER_MUTE_IND * VIN10 VIN13
2K 2K
12

LVDS049
R10
R11 R12
R13 3 26
Y

10 VSWR_FAULT_IND * VIN9 VIN14

GND 2K 2K
200 R14
9

R15
4 25 +5V
* NC VIN15
2K
R18 R17 R19 R20
R21 * * 1K *
C3
5 24
COMB_TEMP VIN8 AGND
2K

3
R22

D S
R23

3
.1uF
6 23 GND-A

D S
1 CONFIG_ID * VIN7 REFIN GND-A
GND GND G 2K

2
+5V 1 R25 R24
G Q1 R26

2
C84 2N7002 7 22 C4 1K
Q2 REV_ID * VIN6 VDD
2N7002 2K
R27
.1uF GND R28
8 21 .1uF
GND GND +3.3V * VIN5 AGND
E2 2K
R29
5

R30
R34 +5V_SPLY *
9
VIN4 CS
20
CS0 C5

8
2 4 2K .1uF
CS0 R31 5 D1
100
U17 R32
10 19

4
+12VA_SPLY * VIN3 DIN MOSI LM336M
SN74AHC1G14 2K GND-A
3

R33
+5V
R35
11 18
GND C85 COMB_REF_PWR * VIN2 NC
2K
R36 GND-A
R37 +12VA
12 17
.1uF E3 COMB_FWD_PWR * VIN1 VDRIVE
GND 2K
5

R39
R40
R38 COMB_INPUT *
13
VIN0 SCLK
16 R105
2 4 30.1K
CS1 2K R41
B 100 B
U18
SN74AHC1G14 * 14 15 +12VA_SPLY
AGND DOUT MISO
E42 E41 E39 E40 E38 E37 E36 E35 E32 E27
3

+3.3V
U2 R106
GND-A 10K
GND-A GND-A
GND
R42 R43

.01uF
+5V

.01uF
.01uF

.01uF
2.43K +5V
E5 +5V GND
0 C10

.01uF
R44

.01uF

.01uF

.01uF

.01uF
.01uF
.01uF

.01uF

.01uF

.01uF

.01uF
E4 E6

.01uF
R45

C6

C8

C9
C7
2.43K
2.43K GND-A GND +5V
U3
GND
.1uF E16
1 16

C21
C11

C15

C16

C17

5
C13

C14

C18

C19

C20

C22
SCLK_PA1 CLK RDY

C12
R16
4 2 10K
2 15 E11 GND-A SCLK_PA1 SPICLK
MOSI SDI CS CS1
U4
+5V_SPLY
GND-A SN74AHC1G14

3
3 14
SDO PR R104
10K
GND
4 13
GND WP GND
C23
+5V 5 12
VSS VDD

.1uF
R46 R47 GND
E8 6
A1 A2
11
0 0

7 10
W1 W2 E1 C24 +5V

+5V
R48 R49 R50 R51 C26 +5V
8 9 C25
B1 B2 .1uF
* 0 0 * GND

5
AD5235 .1uF +12V

2
GND

4
GND .1uF
GND GND 1

PWR
GND
INA R91 Q14

5
D S

5
1 4 U5 1
+ Y SN74AHCT
IN R52 432 MMJT9410
2 4 2

GND
R53 INB
+5V 4
OUT 10K C59
U19 U6 R90 G C61

3
1K 10uF
+3.3V 1 16
R71 SN74AHC1G14 E15 10K
.1uF R118
Q6

3
IN C27

3
CLK RDY - 2
2.43K U7 FDN360P
1uF 1K
R107 SN74AHCT1G00
GND

3
2 15 SPLITTER_MUTE GND GND
2.43K SDI CS GND
E22

2
GND
GND
+3.3V
DS4
+12VA
3 14
+12VA

1
MISO SDO PR
R119
4 13
R108 10K GND
GND WP +5V
2.43K SPLITTER_MUTE_IND
C35 2N7002
+5V 5 12
VSS VDD
C .1uF
C28 Q15 C

3
R130 R131 GND 1uF
6 11
E7

D S
A1 A2
0 0
1
G

2
7 10
3

W1 W2
D S

R133 R132 R134 R135 1

8 9 G
2

B1 B2 GND
* 0 0 *
Q3 R54
AD5235 100K
GND 2N7002
GND GND

GND GND

+5V
C29

E23 U8 E13 +5V +3.3V

+5V
+12V
E14 E12
.1uF E10 U14
GND
5

U10
1 14 C30 D2
FAULT RESET OUTA OUTD R55
1 3 2 4 1
IN OUT
3 8
IN OUT
1 2 1
+3.3V
R116 200

GND
2 13 U9 1K
-INA -IND 1uF MMBD914LT1 DS1
SN74AHC1G14
3

D3 R56 C73 5 2
C33 R117 SHDNn SENSE
R57
3

1M GND

2
MMBD914LT1 10uF C31
10uF 357
1uF
+12V DS2

2
5.49K C32
1

3 12 MC78L05
+INA +IND 10uF
GND

1
GND
C34 R58
GND GND GND
4 11 GND GND
V+ V- GND

2
DS3 1K

GND

GND

GND
4 GND
.1uF NC
GND

1
5 10
+INB +INC
R59

7
GND 3.16K
6 9 LT1963
-INB -INC

+5V TEST GND STUD

7 8 GND
OUTB OUTC

GND

AD8574
GND
GND E9
TP5
GND
COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
FAN_CTRL

D PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
information is submitted in confidence SEE BOM
4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
and neither this document nor the DESIGNER(S)
information disclosed herein shall be
919-4005 217/224-9600 FAX 217/224-9607
reproduced or transferred to other

documents or used or disclosed to

KM
FINISH
others for manufacturing or for any TITLE
other purpose except as specifically STX LP RF SPLITTER BOARD
authorized in writing by BROADCAST

ELECTRONICS, INC. DATE

5-23-09 TYPE SIZE DWG. NO. REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005

MFG. NEXT ASSY.
S B
.x + .030 .xxx + .005

.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 1 OF 2

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 9-23-09 RELEASE TO PRODUCTION JTB KM -----
B 10-9-09 ADD VSWR SHUTDOWN CIRCUIT JTB KM 11713

GND

E21

R115 C38
3 1 6.8pF +5V
L1 +12V

2
TOP 1
R114 2K RF_OUT1 PORT J2A
1K 180nH
+5V +5V 1
FAN_SPEED
R60 2
C82 J11A
A C80 GND C37 51 +12V_FAN_SPLY
2
A
10uF 6.8pF
+5V .1uF
+4dbm =0.528V GND
J11B
3
4 GND
+24dbm =4.29V

5
AD8361 GND J11C
C79 TP6 GND 4

+
1
VPOS SREF
8 U16 1
COMB_INPUT
5
J11D
OPA830
.1uF

-
GND R111 R112
2
IREF VRMS
7 3 C42 J11E
6

2
100 1K 6.8pF
L10 C78
3 6
L2 J11F
GND 7
RFIN FLTR R113 BTM 3
C81 * RF_OUT2 J2B
100nH .1uF 180nH PORT
J11G
1000pF 8
4 5
PWDN COMM
C62 R110 R61 4
39pF C77 J11H
64.9
U15 GND GND C41 51 9
22pF 5 COMB_TEMP
6.8pF
GND GND
J11I
10
GND
GND GND GND
GND J11J
11
GND
J11K
12

J11L
C46 13
6.8pF
J11M
L3 14
TOP 1
RF_OUT3 J3A J11N
PORT
180nH 15

R62 2 J11O
16
+12VA C43 C45 VSWR_FAULT
L7 51 R65
68pF 6.8pF 51 GND J11P
17
AIR_INLET_TEMP
1uH
J5 LED BRD
GND J11Q
18
1 GND GND
C66 SPLITTER_RF_PRESENT
C65 10uF
R70 .1uF J11R
1K GND 19
2 COMB_OVER_TEMP_IND

C64 GND GND

J11S
20
P5 HDR2

C49 J11T
R109 1000pF 6.8pF 21

3
GND
C60 L5
294 J11U
R69 2 BTM 3 22
10K
RF_OUT4 J3B
R72 L6 180nH PORT

1000pF J11V
23
GND * 1uH COMB_FWD_PWR
R64 4

1
R68
150 C52 R66 J11W
24
B GND 51 5 B
6.8pF 51
L8 C63 J11X
25
GND COMB_REF_PWR
10nH GND
GND
1000pF J11Y
26
R95 GND

3
C55 C36 L9 J11Z CONN GND STUDS
R103 10 27
J7 1 1
G U11
68nH

S
18.2 PD85004
R94 J11AA

2
1000pF 1000pF C54
2 6.8pF GND

4
10
3 C58 L4
C56 27pF
4 R128 R129 22pF GND 1
294 294 RF_OUT5 J6
180nH
GND R96
GND GND GND GND 243 C74 R63 2
+5V CONFIG ID
3
C53 51 R67
6.8pF * 4
1000pF R122
10K
5-WAY 2 1
SPLITTER GND
GND GND

J4B J4A
R123 4 3
10K 4-WAY
J4D J4C CONFIG_ID
TEMP CIRCUITS 6 5
R124
+12V
C69 SPLITTER_MUTE
10K 3-WAY J4F J4E
8 7
TEMPERATURE FAILSAFE
+12V J4H J4G
.1uF R125
2 GND E31 10K 2-WAY 10 9
4

R97
J4J J4I
D S
+

R78 R77 R73 100K

1 1
U13A G Q11 R126
2

10K 10K 1M 10K GND

LM324 +12V 2N7002
-

3 +12V
COMB_TEMP
11

GND P4
C67 R89 GND
3

GND 10K
D S

1
JUMPER ON 9,10 FOR STORAGE
.1uF G
2

5 GND Q10
3

2N7002 R136
2N7002 VSWR_FAULT
+

0
+5V
U12A 2
GND
LM339 Q17

3
-

R76

D S
4
1.33K
COMB_OVER_TEMP_IND
12

1
G

2
R137
C GND +3.3V C
2N7002
0
R75 +3.3V R102
3

C68 10K Q18

10K
D S

.01uF

3
GND
Q4

D S
9 1 R74
G
2

2N7002 10K INPUT_OVERDRIVE 1

GND GND VSWR_SHUTDOWN G

2
COMB_OVER_TEMP R138
8
U13C FAULT RESET
GND 1K
LM324 RESET

3
10
INPUT DET

D S
R139 GND
3

1 100K
NORMAL MC14013BD
D S

G +5V

2
GND Q13
1 +5V
G Q5 +5V 2N7002
2

1 14
2N7002 QA VDD
FAN CONTROL C39
GND

R101 GND
2.49K
.1uF D4 2 13 C40
QA QB .1uF
13
GND 3.99V 6 E34
1 3
+5V E30 R140

3
D5 1M MMBD914LT1 3 12

D S
CA QB
R82 R141 MMBD914LT1
U13D 14 R98 7 1 Q12 GND

1
FAN_SPEED C75 U13B G

2
E33 100K 100K 10K
4 11
.01uF 2N7002 2N7002 RA CB
LM324 +5V LM324
12 5
R80 GND
7 Q7 +5V Q19 5 10
R142
3

GND GND GND DA RB

3
+5V 10K 2N7002
GND 100K
D S

COMB_REF_PWR

D S
C44
U12B 1 1
G
R99 1 6 9
R79
2

G SA DB

2
10K LM339 R143
100K SPLITTER_RF_PRESENT R144
0 100K .1uF
6
3.91V @ 24dbm GND
U21
7
VSS SB
8

GND
C47 R145 R146
3

3
3

5
R81 1uF GND
3
D S
D S

C70 10K * 100

D6 U20
D S

.01uF 1 1 Q20
G G C48
2

1 1 3
2

Q21 2N7002 1 Q16 R147

GND G GND 1000pF
2

2N7002 10K LMV7219

2N7002 MMBD914LT1
GND GND R100
10K 4
GND

2
GND R148
GND GND C50 2.2M
GND GND
C51 R149 .01uF
.1uF 150K
FAN_CTRL
+4dbm =0.528V E28

+24dbm =4.29V GND GND GND

R92 R93
+3.3V +3.3V
COMB_INPUT
+5V 1K 100K GND

R85 R87
R83 E29 10K COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
10K
150K
R127
D VSWR_FAULT_IND RF_INPUT_FAULT PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D
1M information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
R84 information is submitted in confidence SEE BOM
4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
100K +5V 11
9 Q8 and neither this document nor the DESIGNER(S)
3

919-4005
3

information disclosed herein shall be 217/224-9600 FAX 217/224-9607

D S
D S

reproduced or transferred to other

GND 14 1 R86 U12D
13 1
G Q9 +5V KM
2

U12C G
2

documents or used or disclosed to

422K LM339 2N7002 FINISH
LM339 2N7002 others for manufacturing or for any TITLE
10 R120
COMB_REF_PWR
8
0.525V 499K other purpose except as specifically STX LP RF SPLITTER BOARD
GND GND authorized in writing by BROADCAST
REV_ID
R88 R150 ELECTRONICS, INC. DATE
100K R121
VSWR_FAULT
100K
SPLITTER_RF_PRESENT 22.1K 5-23-09 TYPE SIZE DWG. NO. REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005

MFG. NEXT ASSY.
S B
.x + .030 .xxx + .005
GND GND
.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 2 OF 2

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 10-09-09 RELEASE TO PRODUCTION JTB KM -----

TO CONTROLLER TP1

GND GND
TP2 TP3
13

14

15
16

J1 +3.3V
GND

1
GND

U1
R1
100 1 16
2 RIN1- EN

A A
2 15
3 RIN1+ ROUT1 SPICLK

3 14
4 RIN2+ ROUT2 MOSI E17 E19
R2 E18 E20
100 4 13
5 RIN2- GND
C1 +5V
5 12
6 DOUT2- VCC AIR_INLET_TEMP
C2
.1uF +3.3V
GND
6 11 INPUT_OVERDRIVE
7 DOUT2+ DIN2
.1uF
AD7490 GND-A
7 10 COMB_OVER_TEMP
8 DOUT1+ DIN1 MISO R3 R4
1 28
RF_INPUT_FAULT VIN11 VIN12
+3.3V R5 2K 2K
R7 8 9 1K R6 +12V_FAN_SPLY
G

11 DOUT1- EN R8 R9
2 27
200 SPLITTER_MUTE_IND * VIN10 VIN13
2K 2K
12

LVDS049
R10
R11 R12
R13 3 26
Y

10 VSWR_FAULT_IND * VIN9 VIN14

GND 2K 2K
200 R14
9

R15
4 25 +5V
* NC VIN15
2K
R18 R17 R19 R20
R21 * * 1K *
C3
5 24
COMB_TEMP VIN8 AGND
2K

3
R22

D S
R23

3
.1uF
6 23 GND-A

D S
1 CONFIG_ID * VIN7 REFIN GND-A
GND GND G 2K

2
+5V 1 R25 R24
G Q1 R26

2
C84 2N7002 7 22 C4 1K
Q2 REV_ID * VIN6 VDD
2N7002 2K
R27
.1uF GND R28
8 21 .1uF
GND GND +3.3V * VIN5 AGND
E2 2K
R29
5

R30
R34 +5V_SPLY *
9
VIN4 CS
20
CS0 C5

8
2 4 2K .1uF
CS0 R31 5 D1
100
U17 R32
10 19

4
+12VA_SPLY * VIN3 DIN MOSI LM336M
SN74AHC1G14 2K GND-A
3

R33
+5V
R35
11 18
GND C85 COMB_REF_PWR * VIN2 NC
2K
R36 GND-A
R37 +12VA
12 17
.1uF E3 COMB_FWD_PWR * VIN1 VDRIVE
GND 2K
5

R39
R40
R38 COMB_INPUT *
13
VIN0 SCLK
16 R105
2 4 30.1K
CS1 2K R41
B 100 B
U18
SN74AHC1G14 * 14 15 +12VA_SPLY
AGND DOUT MISO
E42 E41 E39 E40 E38 E37 E36 E35 E32 E27
3

+3.3V
U2 R106
GND-A 10K
GND-A GND-A
GND R43
R42

.01uF
+5V

.01uF
.01uF

.01uF
2.43K +5V
E5 +5V GND
0 C10

.01uF
R44

.01uF

.01uF

.01uF

.01uF
.01uF
.01uF

.01uF

.01uF

.01uF

.01uF
E4 E6

.01uF
R45

C6

C8

C9
C7
2.43K
2.43K GND-A GND +5V
U3
GND
.1uF E16
1 16

C21
C11

C15

C16

C17

5
C13

C14

C18

C19

C20

C22
SCLK_PA1 CLK RDY

C12
R16
4 2 10K
2 15 E11 GND-A SCLK_PA1 SPICLK
MOSI SDI CS CS1
U4
+5V_SPLY
GND-A SN74AHC1G14

3
3 14
SDO PR R104
10K
GND
4 13
GND WP GND
C23
+5V 5 12
VSS VDD

.1uF
R46 R47 GND
E8 6
A1 A2
11
0 0

7 10
W1 W2 E1 C24 +5V

+5V
R48 R49 R50 R51 C26 +5V
8 9 C25
B1 B2 .1uF
* 0 0 * GND

5
AD5235 .1uF +12V

2
GND

4
GND .1uF
GND GND 1

PWR
GND
INA R91 Q14

5
D S

5
1 4 U5 1
+ Y SN74AHCT
IN R52 432 MMJT9410
2 4 2

GND
R53 INB
+5V 4
OUT 10K C59
U19 U6 R90 G C61

3
1K 10uF
+3.3V 1 16
R71 SN74AHC1G14 E15 10K
.1uF R118
Q6

3
IN C27

3
CLK RDY - 2
2.43K U7 FDN360P
1uF 1K
R107 SN74AHCT1G00
GND

3
2 15 SPLITTER_MUTE GND GND
2.43K SDI CS GND
E22

2
GND
GND
+3.3V
DS4
+12VA
3 14
+12VA

1
MISO SDO PR
R119
4 13
R108 10K GND
GND WP +5V
2.43K SPLITTER_MUTE_IND
C35 2N7002
+5V 5 12
VSS VDD
C .1uF
C28 Q15 C

3
R130 R131 GND 1uF
6 11
E7

D S
A1 A2
0 0
1
G

2
7 10
3

W1 W2
D S

R133 R132 R134 R135 1

8 9 G
2

B1 B2 GND
* 0 0 *
Q3 R54
AD5235 100K
GND 2N7002
GND GND

GND GND

+5V
C29

E23 U8 E13 +5V +3.3V

+5V
+12V
E14 E12
.1uF E10 U14
GND
5

U10
1 14 C30 D2
FAULT RESET OUTA OUTD R116 R55
1 3 2 4 1
IN OUT
3 8
IN OUT
1 2 1
+3.3V
1K 200

GND
2 13 U9
-INA -IND 1uF MMBD914LT1 DS1
SN74AHC1G14
3

D3 R56 C73 5 2
C33 R117 SHDNn SENSE
R57
3

1M GND

2
MMBD914LT1 10uF C31 357
1uF
+12V DS2

2
5.49K C32
1

3 12 MC78L05 10uF
+INA +IND 10uF
GND

1
GND
C34 R58
GND GND GND
4 11 GND GND
V+ V- GND

2
DS3 1K

GND

GND

GND
4 GND
.1uF NC
GND

1
5 10
+INB +INC
R59

7
GND 3.16K
6 9 LT1963
-INB -INC

+5V TEST GND STUD

7 8 GND
OUTB OUTC

GND
TP5
AD8574
GND
GND E9
GND
COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
FAN_CTRL

D PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
information is submitted in confidence SEE BOM
4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
and neither this document nor the DESIGNER(S)
information disclosed herein shall be
919-4005-001 217/224-9600 FAX 217/224-9607
reproduced or transferred to other

documents or used or disclosed to

KM
FINISH
others for manufacturing or for any TITLE
other purpose except as specifically STX LP RF SPLITTER BOARD
authorized in writing by BROADCAST

ELECTRONICS, INC. DATE

5-23-09 TYPE SIZE DWG. NO. REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005-001

MFG. NEXT ASSY.
S A
.x + .030 .xxx + .005

.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 1 OF 2

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

A 11-09-09 RELEASE TO PRODUCTION JTB KM -----

+5V
GND
15 J11O 1 J11A
E21
16 J11P 3 J11C
R115 C38
3 1 6.8pF COMB_TEMP 2 J11B 17 J11Q 5 J11E
COMB_TEMP
L1

2
18 J11R 7 J11G
TOP 1
R114 2K RF_OUT1 PORT J2A +12V_FAN_SPLY
+12V_FAN_SPLY 4 J11D
1K 180nH 9 J11I
+5V +5V
+12V
R60 2
C82 FAN_SPEED
FAN_SPEED 6 J11F 19 J11S
A C80 GND C37 51 11 J11K A
10uF 6.8pF 21 J11U
+5V .1uF
+4dbm =0.528V GND
VSWR_FAULT 8 J11H 12 J11L
VSWR_FAULT
4 GND
+24dbm =4.29V 23 J11W

5
AD8361 GND 13 J11M
C79 TP6 GND AIR_INLET_TEMP 10 J11J 25 J11Y

+
AIR_INLET_TEMP
1 8 U16 1 14 J11N
VPOS SREF COMB_INPUT
OPA830
.1uF SPLITTER_RF_PRESENT 20 J11T

-
R111 R112 SPLITTER_RF_PRESENT GND
GND 2
IREF VRMS
7 3 C42

2
100 1K 6.8pF
L10 C78 COMB_OVER_TEMP_IND 22 J11V
L2 COMB_OVER_TEMP_IND
3 6 GND
RFIN FLTR R113 BTM 3
100nH C81 * RF_OUT2 J2B
COMB_REF_PWR 24 J11X
.1uF 180nH PORT
1000pF COMB_REF_PWR
4 5
PWDN COMM
C62 R110 R61 4
39pF C77 64.9 GND GND C41 COMB_FWD_PWR 26 J11Z
22pF U15 51 5
COMB_FWD_PWR
6.8pF
GND GND
GND
GND GND GND
GND

GND

C46
6.8pF
L3
TOP 1
RF_OUT3 J3A
PORT
180nH

R62 2
+12VA C43 C45
L7 51 R65
68pF 6.8pF 51 GND
1uH
J5
GND
1 GND GND
C66
C65 10uF
R70 .1uF
1K GND
2
C64 GND GND
P5 HDR2

C49
R109 1000pF 6.8pF

3
GND
C60 L5
294
R69 2 BTM 3
10K
RF_OUT4 J3B
R72 L6 180nH PORT

1000pF 1uH
GND *
R64 4

1
R68
GND 150 C52 51 R66
B 6.8pF 51 5 B
L8 C63
GND
10nH GND
GND
1000pF
R95 GND

3
C55 C36 L9
R103 10
J7 1 1
G U11
68nH

S
18.2 PD85004
R94

2
1000pF 1000pF C54
2 6.8pF

4
10
3 C58 L4
C56 27pF
4 R128 R129 22pF GND 1
294 294 RF_OUT5 J6
180nH
GND R96
GND GND GND GND 243 C74 R63 2
+5V CONFIG ID
3
C53 51 R67
6.8pF * 4
1000pF R122
10K
5-WAY 2 1
SPLITTER GND
GND GND

J4B J4A
R123 4 3
10K 4-WAY
J4D J4C CONFIG_ID
TEMP CIRCUITS 6 5
R124
+12V
C69 SPLITTER_MUTE
10K 3-WAY J4F J4E
8 7
TEMPERATURE FAILSAFE
+12V J4H J4G
.1uF R125
2 GND E31 10K 2-WAY 10 9
4

R97
J4J J4I
D S
+

R78 R77 R73 100K

1 1
U13A G Q11 R126
2

10K 10K 1M 10K GND

LM324 +12V 2N7002
-

3 +12V
COMB_TEMP
11

GND P4
C67 R89 GND
3

GND 10K
D S

1
JUMPER ON 9,10 FOR STORAGE
.1uF G
2

5 GND Q10
3

2N7002 R136
VSWR_FAULT
+

0
+5V
U12A 2 Q17
GND
LM339 2N7002
+5V

3
-

R76

D S
4
1.33K
COMB_OVER_TEMP_IND R151
12

J8 1
G

2
10K
1 R137
C GND +3.3V C
0
R75 +3.3V Q18
R102
3

C68 10K 2
2N7002
10K
D S

.01uF

3
HDR2
GND
Q4

D S
9 1 R74
G
2

2N7002 10K INPUT_OVERDRIVE 1

GND GND VSWR_SHUTDOWN G

2
COMB_OVER_TEMP R138
8
U13C FAULT RESET
GND 1K
LM324 RESET

3
10
INPUT DET

D S
R139 GND
3

1 100K
NORMAL MC14013BD
D S

G +5V

2
GND Q13
1 +5V
G Q5 +5V 2N7002
2

1 14
2N7002 QA VDD
FAN CONTROL C39
GND

R101 GND
2.49K
.1uF D4 2 13 C40
QA QB .1uF
13
GND 3.99V 6 E34
1 3
+5V E30 R140

3
D5 1M MMBD914LT1 3 12

D S
CA QB
R82 R141 MMBD914LT1
U13D 14 R98 7 1 Q12 GND

1
FAN_SPEED C75 U13B G

2
E33 100K 100K 10K
4 11
.01uF 2N7002 RA CB
LM324 +5V LM324
12 5 Q19
R80 GND
7 Q7 +5V 2N7002 5 10
R142
3

GND GND GND DA RB

3
+5V 10K 2N7002
GND 100K
D S

COMB_REF_PWR

D S
C44
U12B 1 1
G
R99 1 6 9
R79
2

G SA DB

2
10K LM339 R143
100K SPLITTER_RF_PRESENT
0 .1uF
6
3.91V @ 24dbm GND
U21
7
VSS SB
8

GND
C47 R145 R146
3

3
3

5
R81 1uF GND
3
D S
D S

C70 10K * 100 +5V

D6 U20
D S

.01uF 1 1 Q20
G G C48
2

1 1 3
2

Q21 2N7002 1 Q16 R147

GND G GND 1000pF R144
2

2N7002 10K LMV7219

2N7002 150K MMBD914LT1
GND GND R100
10K 4
GND

2
GND R148
GND GND C50 2.2M
GND GND
C51 R149 .01uF
.1uF 100K
FAN_CTRL
+4dbm =0.528V E28

+24dbm =4.29V GND GND GND

R92 R93
+3.3V +3.3V
COMB_INPUT
1K 100K GND
+5V

R85 R87
R83 E29 10K COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
10K
150K
R127
D VSWR_FAULT_IND RF_INPUT_FAULT PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D
1M information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
R84 information is submitted in confidence SEE BOM
Q8 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
100K +5V 11
9 2N7002 and neither this document nor the DESIGNER(S)
3

919-4005
3

information disclosed herein shall be 217/224-9600 FAX 217/224-9607

D S
D S

reproduced or transferred to other

GND 14 1 R86 U12D
13 1
G Q9 +5V KM
2

U12C G
2

documents or used or disclosed to

422K LM339 2N7002 FINISH
LM339 others for manufacturing or for any TITLE
10 R120
COMB_REF_PWR
8
0.525V 499K other purpose except as specifically STX LP RF SPLITTER BOARD
GND GND authorized in writing by BROADCAST
REV_ID
R88 R150 ELECTRONICS, INC. DATE
100K R121
VSWR_FAULT
100K
SPLITTER_RF_PRESENT 22.1K 5-23-09 TYPE SIZE DWG. NO. REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005-001

MFG. NEXT ASSY.
S A
.x + .030 .xxx + .005
GND GND
.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 2 OF 2

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

B 1-25-10 WAS 919-4005-001,CHG R76 (102-2214) JTB KM 11746
C 6-14-10 CHG R120 TO 102-3323 (SHT 2) JTB 11790

TO CONTROLLER TP1

GND GND
TP2 TP3
13

14

15
16

J1 +3.3V
GND
GND

1
U1
R1
100 1 16
2 RIN1- EN

A A
2 15
3 RIN1+ ROUT1 SPICLK

3 14
4 RIN2+ ROUT2 MOSI E17 E19
R2 E18 E20
100 4 13
5 RIN2- GND
C1 +5V
5 12
6 DOUT2- VCC AIR_INLET_TEMP
C2
.1uF +3.3V
GND
6 11 INPUT_OVERDRIVE
7 DOUT2+ DIN2
.1uF
AD7490 GND-A
7 10 COMB_OVER_TEMP
8 DOUT1+ DIN1 MISO R3 R4
1 28
RF_INPUT_FAULT VIN11 VIN12
+3.3V R5 2K 2K
1K R6 +12V_FAN_SPLY
G

R7 8 9
11 DOUT1- EN R8 R9
2 27
200 SPLITTER_MUTE_IND * VIN10 VIN13
12

LVDS049 2K 2K
R10
R11 R12
R13
Y

3 26
10 VSWR_FAULT_IND * VIN9 VIN14
GND 2K 2K
200 R14
9

R15
4 25 +5V
* NC VIN15
2K
R18 R17 R19 R20
R21 * * 1K *
C3
5 24
COMB_TEMP VIN8 AGND

3
2K
R22

D S
3
R23 .1uF
6 23 GND-A

D S
1 CONFIG_ID * VIN7 REFIN GND-A
GND GND

2
G 2K
+5V 1 R25 R24
Q1

2
G R26
C84 2N7002 7 22 C4 1K
Q2 REV_ID * VIN6 VDD
2N7002 2K
R27
.1uF GND R28
8 21 .1uF
GND GND +3.3V * VIN5 AGND
E2 2K
R29
5

R30
R34 +5V_SPLY *
9
VIN4 CS
20
CS0 C5

8
2 4 2K .1uF
CS0 R31 5 D1
100 R32
U17

4
10 19
+12VA_SPLY * VIN3 DIN MOSI LM336M
SN74AHC1G14 2K GND-A
3

R33
+5V
R35
11 18
GND C85 COMB_REF_PWR * VIN2 NC
2K
R36 GND-A
R37 +12VA
12 17
.1uF E3 COMB_FWD_PWR * VIN1 VDRIVE
GND 2K
5

R39
R40
R38 COMB_INPUT *
13
VIN0 SCLK
16 R105
2 4 30.1K
CS1 2K R41
B 100 B
U18
SN74AHC1G14 * 14 15 +12VA_SPLY
AGND DOUT MISO
E35 E32 E27
3

+3.3V E42 E41 E39 E40 E38 E37 E36 R106

GND-A U2
GND-A GND-A 10K
GND R43
R42

.01uF

.01uF
+5V

.01uF

.01uF
2.43K +5V
E5 +5V GND
0 C10

.01uF
.01uF

.01uF

.01uF

.01uF
.01uF
.01uF

.01uF

.01uF

.01uF

.01uF
R44

.01uF
E4 E6

C6

C8

C9
R45

C7
2.43K
2.43K GND-A GND +5V
U3
GND
.1uF E16
1 16

C21
C11

C15

C16

C17

5
C13

C14

C18

C19

C20

C22
C12
SCLK_PA1 CLK RDY
R16
4 2 10K
2 15 E11 GND-A SCLK_PA1 SPICLK
MOSI SDI CS CS1
U4
+5V_SPLY
GND-A SN74AHC1G14

3
3 14
SDO PR R104
10K
GND
4 13
GND WP GND
C23
+5V 5 12
VSS VDD

.1uF
R46 R47 GND
E8 6 11
A1 A2
0 0

7 10
W1 W2 E1 C24 +5V

+5V
R48 R49 R50 R51 C26 +5V
8 9 C25
B1 B2 .1uF
* 0 0 * GND

5
AD5235 .1uF +12V 2
GND GND 4
GND GND .1uF Q14

PWR
1 GND

5
INA R91 NJT4031N

5
U5 D S 1
1 4
+ Y SN74AHCT
IN R52 432

GND
2 4 2
R53 INB
+5V 4
OUT 10K C59
U19 U6 R90 G C61 3
1K 10K 10uF
+3.3V R71 SN74AHC1G14 E15 .1uF R118

3
1 16 Q6

3
CLK RDY
U7 - IN 2 C27
2.43K 1uF FDN360P
SN74AHCT1G00 1K
R107

3
GND SPLITTER_MUTE GND
2.43K 2 15 GND
SDI CS GND
E22

2
GND
GND
+3.3V
DS4
+12VA

1
3 14
MISO SDO PR +12VA
R119
4 13
R108 10K GND
GND WP +5V
2.43K SPLITTER_MUTE_IND
C35 2N7002
+5V 5 12
VSS VDD
C .1uF
C28 Q15 C

3
R130 R131 GND 1uF
6 11

D S
E7 A1 A2
0 0
1

2
G
7 10
3

W1 W2
D S

R133 R132 R134 R135 1

8 9
2

B1 B2 G
GND
* 0 0 *
Q3 R54
AD5235 100K
GND 2N7002
GND GND

GND GND

+5V
C29

E23 U8 E13 +5V +3.3V

+5V
+12V
E14 E12
.1uF E10 U14
GND
5

U10
1 14 C30 D2
FAULT RESET OUTA OUTD R116 R55
1 3 8 1 2 1
1 3 2 4 IN OUT IN OUT +3.3V
1K 200

GND
2 13 U9
-INA -IND 1uF MMBD914LT1 DS1
3

R56 SN74AHC1G14 5 2
D3 C33 C73 R117 SHDNn SENSE
3

R57

2
1M GND
MMBD914LT1 10uF C31 357

2
1

3 12 1uF
+12V DS2 MC78L05 10uF 5.49K C32
+INA +IND 10uF

1
GND GND
C34 R58
GND GND GND
4 11 GND GND

2
V+ V- GND
DS3 1K

GND

GND

GND
4 GND
.1uF NC
GND

1
5 10
+INB +INC
R59

7
GND 3.16K
6 9 LT1963
-INB -INC

+5V TEST GND STUD

7 8 GND
OUTB OUTC

GND
TP5
AD8574
GND
GND E9
GND
COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
FAN_CTRL

D PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
information is submitted in confidence SEE BOM
4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
and neither this document nor the DESIGNER(S)
information disclosed herein shall be
919-4005-103 217/224-9600 FAX 217/224-9607
reproduced or transferred to other

documents or used or disclosed to

KM
FINISH
others for manufacturing or for any TITLE
other purpose except as specifically STX LP RF SPLITTER BOARD
authorized in writing by BROADCAST

ELECTRONICS, INC. DATE

TYPE SIZE DWG. NO.
5-23-09 REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005-103

S C
.x + .030 .xxx + .005 MFG. NEXT ASSY.

.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 1 OF 2

1 2 3 4
 1 2 3 4

REVISIONS

REV DATE DESCRIPTION DFTSMN ENGR ECN

B 1-25-10 WAS 919-4005-001,CHG R76 (102-2214) JTB KM 11746

C 6-14-10 CHG R120 TO 102-3323 (SHT 2) JTB 11790

+5V
GND
15 J11O 1 J11A
E21
16 J11P 3 J11C
R115 C38
3 1 6.8pF
COMB_TEMP
COMB_TEMP 2 J11B 17 J11Q 5 J11E
L1

2
18 J11R 7 J11G
TOP 1
R114 2K RF_OUT1 J2A +12V_FAN_SPLY 4 J11D
1K 180nH PORT +12V_FAN_SPLY
+5V +5V
9 J11I
+12V
R60 2
C82 FAN_SPEED
FAN_SPEED 6 J11F 19 J11S
A C80 GND C37 51 11 J11K A
10uF 6.8pF 21 J11U
+5V .1uF
+4dbm =0.528V GND
VSWR_FAULT 8 J11H 12 J11L
VSWR_FAULT
4 GND
+24dbm =4.29V 23 J11W

5
AD8361 GND 13 J11M
C79 TP6 GND AIR_INLET_TEMP 10 J11J 25 J11Y

+
AIR_INLET_TEMP
1 8 U16 1 14 J11N
VPOS SREF COMB_INPUT
OPA830
.1uF SPLITTER_RF_PRESENT 20 J11T

-
R111 R112 SPLITTER_RF_PRESENT GND
GND 2
IREF VRMS
7 3 C42

2
100 1K 6.8pF
L10 C78 COMB_OVER_TEMP_IND 22 J11V
L2 COMB_OVER_TEMP_IND
3 6 GND
RFIN FLTR R113 BTM 3
100nH C81 * RF_OUT2 J2B
.1uF
1000pF 180nH PORT
COMB_REF_PWR
COMB_REF_PWR 24 J11X
4 5
PWDN COMM
C62 R110 R61 4
39pF C77 64.9 GND GND C41 COMB_FWD_PWR
COMB_FWD_PWR 26 J11Z
22pF U15 51 5
6.8pF
GND GND
GND
GND GND GND
GND

GND

C46
6.8pF
L3
TOP 1
RF_OUT3 J3A
PORT
180nH

R62 2
+12VA C43 C45
L7 51 R65
68pF 6.8pF 51 GND
1uH
J5
GND
1 GND GND
C66
C65 10uF
R70 .1uF
1K GND
2

HDR2
C64 GND GND
P5
C49
R109 1000pF 6.8pF

3
GND
C60 L5
294
R69 2 BTM 3
10K
RF_OUT4 PORT
J3B
R72 L6 180nH
1000pF 1uH
GND *
R64

1
4
R68
GND 150 C52 51 R66
B 6.8pF 51 5 B
L8 C63
GND
10nH GND
GND
1000pF
R95 GND

3
C55 C36 L9
R103 10
J7 1 1
G U11
68nH

S
18.2 PD85004
R94

2
1000pF 1000pF C54
2 6.8pF

4
10
3 C58 L4
C56 27pF
4 R128 R129 22pF GND 1
294 294 RF_OUT5 J6
180nH
GND R96
GND GND GND 2
GND 243 C74 R63 +5V CONFIG ID
3
C53 51 R67
6.8pF * 4
1000pF R122
10K
GND
5-WAY 2 1
GND
SPLITTER GND

J4B J4A
R123 4 3
10K 4-WAY
J4D J4C CONFIG_ID
TEMP CIRCUITS 6 5
R124
+12V
C69 SPLITTER_MUTE
10K 3-WAY J4F J4E
8 7
TEMPERATURE FAILSAFE
+12V J4H J4G
.1uF R125
2 GND E31 10K 2-WAY 10 9
4

R97
J4I
D S

J4J
+

R78 R77 R73 100K

1 1
U13A Q11 R126
2

1M G
10K 10K 10K GND
+12V 2N7002
-

LM324
3 +12V
COMB_TEMP
11

GND P4
C67 R89 GND
3

GND 10K
D S

1
JUMPER ON 9,10 FOR STORAGE
.1uF G
2

GND Q10
3

5
2N7002 R136
VSWR_FAULT
+

0
+5V
U12A 2 Q17
GND
LM339 2N7002
+5V

3
-

R76

D S
4
2.21K
12

COMB_OVER_TEMP_IND R151 1
J8

2
10K G
1 R137
C GND +3.3V C
0
R75 +3.3V Q18
3

C68 10K R102 2

2N7002
D S

10K

3
.01uF GND
HDR2
Q4

D S
9 1 R74
2

G
2N7002 10K INPUT_OVERDRIVE 1

2
GND GND VSWR_SHUTDOWN G
COMB_OVER_TEMP R138
8
U13C FAULT RESET
GND 1K
LM324 RESET

3
10
INPUT DET

D S
R139 GND
3

1 100K
D S

NORMAL +5V MC14013BD

2
GND G
Q13 +5V
1
Q5 2N7002
2

G +5V 1 14
2N7002 QA VDD
FAN CONTROL C39
GND

R101 GND
2.49K
.1uF D4 2 13 C40
QA QB .1uF
13
GND 3.99V 6 E34
1 3
+5V E30

3
R140

3
D5 MMBD914LT1 3 12

D S
1M CA QB
R82 R141 MMBD914LT1
U13D 14 R98

1
U13B 7 1 Q12 GND

2
E33 100K 100K
FAN_SPEED C75 10K G
2N7002 4 11
LM324 .01uF LM324 RA CB
+5V
12 5 Q19
R80 GND
7 Q7 +5V 2N7002 5 10
3

R142 GND GND

3
+5V 2N7002 GND DA RB
10K
D S

GND 100K

D S
COMB_REF_PWR C44
U12B 1 1 R99 1 6 9
2

R79 G

2
G SA DB
10K LM339 R143
100K SPLITTER_RF_PRESENT
0 .1uF
6 GND
3.91V @ 24dbm U21
7
VSS SB
8

GND
C47 R145 R146
3
3

5
3
R81
3

GND
D S

1uF
D S

C70 10K * 100 +5V

D6 U20
D S

.01uF 1 1 Q20
G C48
2
2

G 1 1 1 3
Q21 2N7002 Q16 1000pF R147
2

GND G GND R144

2N7002 10K LMV7219
2N7002 150K MMBD914LT1
GND GND R100
10K 4

2
GND GND R148
GND GND C50 2.2M
GND GND
C51 R149 .01uF
.1uF 100K
FAN_CTRL
+4dbm =0.528V E28

+24dbm =4.29V GND GND GND

R92 R93
+3.3V +3.3V
COMB_INPUT
1K 100K GND
+5V

R85 R87
R83 E29 10K COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
10K
150K
R127
D VSWR_FAULT_IND RF_INPUT_FAULT PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D
1M information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
R84 information is submitted in confidence SEE BOM
Q8 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
100K +5V 11
9 2N7002 and neither this document nor the DESIGNER(S)
3

919-4005-103
3

information disclosed herein shall be 217/224-9600 FAX 217/224-9607

D S
D S

reproduced or transferred to other

13 1
14 1 Q9 +5V KM
2

GND U12C R86 U12D G

2

G documents or used or disclosed to

422K LM339 2N7002 FINISH
LM339 others for manufacturing or for any TITLE
10 R120
COMB_REF_PWR
8
0.525V 332K other purpose except as specifically STX LP RF SPLITTER BOARD
GND authorized in writing by BROADCAST
GND REV_ID
R88 R150 ELECTRONICS, INC. DATE
100K 100K
R121 TYPE SIZE DWG. NO.
VSWR_FAULT SPLITTER_RF_PRESENT 22.1K 5-23-09 REV

TOLERANCE (DECIMAL) U.O.S. D 919-4005-103

S C
.x + .030 .xxx + .005 MFG. NEXT ASSY.
GND GND
.xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET 2 OF 2

1 2 3 4
 1 2 3 4

C50 REVISIONS
STEREO GENERATOR TO EXCITER R26
C47 T1
REV DATE DESCRIPTION DFTSMN ENGR ECN
6 1 * A 4-27-09 RELEASE TO PRODUCTION JTB DK -----
.1uF
+12V B 8-5-09 RELEASE,,,WITH BOM CHG'S JTB DK 11702
+1.8V .1uF
R32 R25
+5V +3.3V 2 5 0
110

J1A
1
RX+
C51
4 3
R28
2 *
J1B RX- .1uF

3
J1C RIGHT

4
J1D LEFT

5
A J1E E25 A

R27
6 0
J1F E26
7
J1G
C31
8 -5V
J1H .1uF
C1 C32
9 1uF
J1I 10uF
+5V
10
J1J C30
C3

3
+5V +3.3V .1uF +3.3V
J1K 11 1uF D1
MMBD914LT1 C29 C24

1
+3.3V
12 10uF
J1L C41 R4
GND
+5V 2K .1uF
13 GND
J1M

3
C42 10uF D2 C2 U5
R17
MMBD914LT1

3
390pF 1 20

1
14 D3 VINL MODE1
J1N
MMBD914LT1 1K
GND

1
R1 .1uF GND R5 R18 GND
15 GND GND 2 19
J1O STEREO GENERATOR PRESENCE DETECT VINR MODE0
1K 2K 1K
GND

R29
16 GND

3
J1P

10K
D4 3 18
+3.3V C4 VREF1 FMT1
MMBD914LT1
C43 C27 C25 +3.3V +3.3V

1
390pF

R30
GND 4 17

10K
VREF2 FMT0 C23 Y1
GND C28
10uF 10uF 4 1
C44 GND .1uF GND
VCC VC
5 16
VCC OSR
GND .1uF
.1uF GND .1uF
GND
6 15 3 2
AGND SCKI 16.896 MHz OUT GND

48

47

46

45

44

43

42

41

40

39

38

37
GND
C26
GND
7 14
PDWN VDD

BCKB

LRCKB

SDINB

SDOUTB

SDOUTA

SDINA

LRCKA

BCKA
VIO
BGND

DGND3

NC
1 36
RX1+ SYNC .1uF
2 35 GND 8 13
RX1- BLS BYPAS DGND

3 34
RX2+ AESOUT 9 12

2
TEST DOUT
4 33 R19
RX2- VDD33
0
5 32 10 11
RX3+ TX+ LRCK BCK

1
6 U8 31 PCM1803A
SGPCS RX3- TX-
GND GND GND
7 SRC4382 30
RX4+ DGND2
+3.3V
B DS4 8 29 B
RX4- GPO4

2 1 R31 33k ksps

9 28
VCC GPO3
200
+3.3V 10 27
33 KSPS
AGND GPO2
GRN R44 TP9
11 26
LOCK GPO1
SRC PLL LOCK C45

CDOUT
TP10

DGND1
10K

VDD18
R45

RXCKI

MUTE
12 25

CCLK
+3.3V

CDIN
CPM
RDY
RXCKO MCLK

RST
INT
C56

CS
10K
10uF TP11
C46

13

14

15

16

17

18

19

20

21

22

23

24
C57 10uF

R58

10K
GND
GND .1uF R59
GND
.1uF GND
10K

R60

10K
GND +3.3V
GND

R33

10K
2
SCK
+3.3V
R61
C55
SDO 0

R34

10K
RST

1
CSDI
SDI
10uF
COFS
C54
CSCK
R62
+1.8V2 +3.3V .1uF GND

C48 10K
R36

48

47

46

45

44

43

42

41

40

39

38

37
GND
Y2 GND
C60
110

SDINB

SDINA
BCKB

LRCKB

SDOUTB

SDOUTA

LRCKA

BCKA
VIO
BGND

DGND3

NC
10uF 4 1
C49 +3.3V VCC VC 1
RX1+ SYNC
36

R63 * 2 35
GND RX1- BLS
GND .1uF R47
3 2
10K OUT GND 3 34
RX2+ AESOUT
*
GND 4 33
RX2- VDD33

STEREO GENERATOR TO EXCITER COMPONENT NOT PLACED 5 32

RX3+ TX+

SGPCS2 6 U3 31
+5V RX3- TX-
17 6 7 SRC4382 30
J1Q SGPCS E27 TP12 C5 RX4+ DGND2
+3.3V
DS6 8 29
18 R6 RX4- GPO4
J1R D2ACS U1B 7 6
2 1 R2 152k samples/sec
.1uF AD8676ARZ 1.21K 9 28
VCC GPO3
J1S 19
A2DCS
C6 200
5 U2B 7 +3.3V 10 27
PILOT AGND GPO2
20 AD8676ARZ GRN R40
J1T TP2 TP3 10uF C8 11 26
GND LOCK GPO1
GND 5
U6 SRC PLL LOCK C58

CDOUT
DGND1
10K

VDD18
R41

RXCKI
21

MUTE
12 25

CCLK
C C

CDIN
J1U

CPM
SCK R7

RDY
C9 RXCKO MCLK

RST
100pF

INT
CS
1 28
SPARE2 ZEROL VCC2 10K
22 825 10uF
J1V SDI C59
R8

13

14

15

16

17

18

19

20

21

22

23

24
2 27 100pF
SPARE1 ZEROR AGND3
23 +5V
J1W SDO 825

R43

10K
GND
C10 GND .1uF R48
3 26
24 MSEL OUTL-
J1X CSDI
10K

R42

10K
GND +3.3V
25 4 25 2 .1uF GND A2DCS
J1Y
8

CSDO COFS LRCK OUTL+

2
SCK
+

J1Z 26
U1A R9 R35
CSCK 5 24 1
CSDO DATA AGND2 SDO
AD8676ARZ 0
+5V 1.21K
27 RST
-

J1AA

1
COFS R10
6 23 3 825 SDI
CSCK BCK VCC1 C38
4

28
J1AB PILOT
C11 C12 GND GND
SGCLK_EN
7 22 10uF R49
SGCLK_EN SCK VCOML 47uF
J1AC 29 C13 -5V .1uF GND +5V
SG_OUT +1.8V
C14 C52 10K
+3.3V 8 21 GND GND
30 DGND VCOMR R11
J1AD SGCLK_EN 100pF
C15 10uF
31
R12 825 2 .1uF GND C53
9 20
8

J1AE +3.3V
VDD REF
10K R50
+

32 .1uF GND
J1AF U2A 1
C17 D2ACS
10
MS AGND1
19 SG_OUT GND .1uF +5V +3.3V +12V
AD8676ARZ 10K
-

3 +5V +3.3V +12V

GND 10uF 11 18 C39
GND MDI OUTR-
4

SDO
33

2
J1AG SPARE1 6 DS3 DS5
DS1
12 17 GRN GRN GRN

1
34 SCK MC OUTR+ C18 .1uF GND
J1AH SPARE2 R13 -5V
U7B 7
35 13 16 +5V AD8676ARZ 1.21K
J1AI RST SDI MDO AGND 100pF R14 +3.3V
+3.3V R51 R53 R55
36
C33 5
619 274 1K
J1AJ SGPCS2 R20 825
14 15
RST VCC C34
10K GND
37

2
J1AK .1uF DS15 GND GND GND
+3.3V PCM1796
GND GND C35 R21 100pF
GRN

1
38
J1AL +1.8V
825
39 10uF
GND
2

J1AM DS2 RST

GRN +5V R64
1

40 200
J1AN C36
U9

C
+1.8V2
+3.3V TPS79301DBV
R52 R65

B
2 .1uF GND COPYRIGHT C 2006 BROADCAST ELECTRONICS, INC.
8

200 3 6
IN OUT Q2
U4 1K
C

D R22 MMBT3904 PROPRIETARY RIGHTS are included in DWN. BY MATERIAL D

+1.8V U7A 1
+3.3V TPS79301DBV R66 C62 C61 information disclosed herein. This JTB BROADCAST ELECTRONICS INC.
AD8676ARZ

E
1 10uF
R3 1.21K
SEE BOM
B

3 6 EN 14.3K
-

100pF information is submitted in confidence

IN OUT Q1 R23 GND 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
1K 3 and neither this document nor the
C40 825 DESIGNER(S)
4

MMBT3904 information disclosed herein shall be

919-4020 217/224-9600 FAX 217/224-9607
C21 C63 4 5 GND
R15 C22 GND NR FB reproduced or transferred to other
E

1 10uF GND
GND

EN 14.3K
100pF GND
C37 .1uF GND
.1uF
documents or used or disclosed to
DK
-5V FINISH
others for manufacturing or for any TITLE
R67
2

C20 4 5 GND 100pF R24 GND 30.1K other purpose except as specifically STX LP STEREO GENERATOR
NR FB
GND

C64 authorized in writing by BROADCAST

.1uF 825
.1uF GND ELECTRONICS, INC. DATE
TYPE SIZE DWG. NO.
R16 GND 12-9-08 REV
2

GND 30.1K TOLERANCE (DECIMAL) U.O.S.

S D 919-4020
C19 GND
B
.x + .030 .xxx + .005 MFG. NEXT ASSY.
.1uF GND
GND .xx + .015 ANGLES + 1 MODEL STX LP SCALE NONE SHEET
1 OF
1

GND

1 2 3 4
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 9-20-09 RELEASE TO PRODUCTION JTB
B 11-6-09 CHG C5,C11,C17 TO NOT PLACED..ADD R22 102-1002 JTB 11725

A A

+5V
C1

.1uF TP1
1

+5V
GND C2

+5V
U1 2 R1 3 C3
.1uF

5
LM35DZ 2.21K GND

+
U2 R2 R3 3
R17 C4 1 .1uF

8
COMBTEMP 1
10K C5 1000pF OPA830 GND
*
100 100 D1

+
-
4 C6 U3A 1 1 3
3

1000pF
B B

2
LT1490
MMBD914LT1

-
GND +5V
GND GND GND 2 J1

4
R4 GND 1
GND
4.32K
GND 2
R5
1.21K R6

0 3
C7 PA_TEMP
GND
+5V 4
C8
20pF

.1uF GND
1

TP2 +5V
GND C9

U4 2 R7 3 .1uF
5

LM35DZ 2.21K GND

+

R20 U5 R8 R9
C10 1 5
10K C11 COMB TEMP 2
1000pF OPA830
100 100 D2
*
-

4 C12 U3B 7 1 3
3

1000pF
LT1490
2

GND MMBD914LT1
GND GND GND 6
R10 GND
GND R11
4.32K

*
R22
R12
1.21K 10K
GND
GND
GND

+5V
C13

.1uF
1

TP3 +5V
GND C14
C C
+5V
U6 2 R13 3 C15
.1uF
5

LM35DZ 2.21K GND

+

U7 R14 R15
R21 C16 1 3 .1uF
COMB TEMP 3
8

10K C17 1000pF OPA830

100 100 GND D3
*
+
-

4 C18 U8A 1 1 3
3

1000pF
2

LT1490
GND MMBD914LT1
-

GND GND GND 2

4

R16 GND
GND
4.32K
GND
R18
1.21K

GND

U8B 7
R19 LT1490
4.32K
6

GND

D D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

K MURPHY 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE TEMP SENSE BACKER BOARD
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D 919-4025
DWG. NO. REV B
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
1 Vcap VDD 28
2 Vss LEDA 27
3 CLKOUT LEDB 26
4 INT Vddosc 25
5 NC OSC2 24
6 SO OSC1 23
7 SI Vssosc 22
8 SCK Vsspll 21
9 CS Vddpll 20
10 RESET Vddrx 19
11 Vssrx Vsstx 18
12 TPIN- TPOUT+ 17
13 TPIN+ TPOUT- 16
14 RBIAS Vddtx 15
BANK 5 BANK 4 BANK 3 BANK 2 BANK 1

BANK 8 BANK 7 BANK 6

 1 2 3 4

REVISION HISTORY
REV DATE DESCRIPTION DRAWN ECN
A 07-31-09 RELEASE TO PRODUTION JTB -----------
B 01-28-10 DISCONNECT D3 PIN 5 JTB 11750
C 02-03-11 CHANGE PART# FOR TP5, CHANGE HOLES FOR J2 TO NON-PLATED DLR 11837

TP1
TO CONTROLLER
GND GND TP2 TP3
13

14

15
16

+5VA

+3.3V C1 DRIVER_CUR
GND

1
GND

+3.3V
R2 IPA_CUR
100 1 16 .1uF
2 RIN1- EN GND-A

A R3 U2 R4 VSWR_SHUTDOWN A
2 15 1 28
3 RIN1+ ROUT1 SPICLK PA_OVERCURRENT VIN11 VIN12
2K 2K
R7 R5 R8 PS_FAULT
3 14 * 2 27
4 RIN2+ ROUT2 MOSI PA_MUTE_STATUS VIN10 VIN13
2K 2K
R9
R6 R11 R12
100 4
RIN2- GND
13 C2 PA_VSWR_FOLD
* 3
VIN9 VIN14
26
5
2K 2K +5VA
R13 R15
R14
5 12 4 25 +5VA
J1 6 DOUT2- VCC * NC VIN15
2K 1K
.1uF GND R20 R17 R16 R18 R19
6 11 5 24 * * 1K * C3
7 DOUT2+ DIN2 PA_TEMP VIN8 AGND
2K R21
R22
7 10 6 23
.1uF
DOUT1+ DIN1 MISO GND-A
8 FINAL_CUR_1 * VIN7 REFIN GND-A
2K R23
R10 R77
+3.3V R24
8 9 1K C5 1K
G

11
R25 DOUT1- EN FINAL_CUR_2
* 7
VIN6 VDD
22
2K R26
200
R27
12

LVDS049
U1 * 8 21
FINAL_CUR_3 VIN5 AGND .1uF D3 8
R28
Y

10 2K R29
GND R30
200 9 20 C6
9

FINAL_CUR_4 * VIN4 CS CS0

2K R32 .1uF
5
2N7002 R33
10 19
PA_48V * VIN3 DIN MOSI
2K GND-A
R35
R36

3
11 18 4 LM336M

D S
PA_REF_PWR * VIN2 NC CONTROL TO INTERNAL PA'S

3
2K
1 R37
GND GND R38 GND-A

D S
G

2
* 12 17
1 PA_FWD_PWR VIN1 VDRIVE 1
G PA_FWD_PWR J2A
2
Q1 2K
R39
Q3 R40
2N7002 13 16 2
+5VPA C30 GND RF_DET * VIN0 SCLK PA_REF_PWR J2B
2K R41
GND 3
14 15 FINAL_CUR_1 J2C
.1uF * AGND DOUT MISO
GND
5

GND-A AD7490 4
R31 GND-A GND-A FINAL_CUR_2 J2D
R42 +5VPA
2 4 C11

C10
C7

C8

C9
CS0 5
100 0
FINAL_CUR_3 J2E
U3

C12

C13

C14

C15

C18

C19

C21

C22

C23
C16

C17

C20
SN74AHC1G14 .1uF 6

.01uF

.01uF
.01uF
3

+5VPA

.01uF
C42 GND-A GND GND FINAL_CUR_4 J2F
R34 GND 7

.01uF

.01uF

.01uF

.01uF

.01uF

.01uF
J2G

5
IPA_CUR

.01uF

.01uF

.01uF

.01uF

.01uF

.01uF
SPICLK
.1uF
100 GND
4 2 8
5

GND-A SCLK_PA1 DRIVER_CUR J2H

U4
2 4 SN74AHC1G14 9
B CS1 RF_DET J2I B
GND-A

3
U15 10
+3.3V
SN74AHC1G14 GND PA_48V J2J
3

R43 +5VPA 11
+5VPA GND +5VPA PA_TEMP J2K
2.43K

12
R44 PA_VSWR_FOLD J2L
AD5235 2.43K
13
1 16
PA_OVERCURRENT J2M
SCLK_PA1 CLK RDY R45
2.43K 14
E1 LV_V+ J2N
2 15
MOSI SDI CS
15
PS_FAULT J2O
3 14
SDO PR 16
48V_CONT J2P
4 13 17
GND WP PA_BIAS J2Q
C24
18
5
VSS VDD
12 PS_INHIBIT J2R
+5VPA
R46 R47 .1uF 19
6 11
GND J2S
A1 A2
0 0 20
PA_MUTE_STATUS J2T
7 10 +5VPA
W1 W2 C27 21
R48 R49 R50 R51 +5VPA
PA_FAULT_RESET J2U
C29 +5VPA
8
B1 B2
9
E2 C28 22
* 0 0 * .1uF VSWR_SHUTDOWN J2V
GND

5
GND .1uF
U5 GND .1uF 23
GND GND 1 J2W

PWR
INA GND

5
1 4 U6 24
+ IN
Y R56 J2X
SN74AHCT 2 4 2

GND
INB
4 10K 25
OUT U8 J2Y
SN74AHC1G14
C31

3
IN

3
- 2 26
U9 1uF
+3.3V J2Z
SN74AHCT1G00
GND

3
R52 +5VPA GND
+5VPA +5VPA GND
2.43K GND GND

R53
2.43K R54 R55
U7 2.43K

1 16 1K +5VPA
CLK RDY +5VA
+5VPA
J3 L1

MAIN PWR IN
2 15 CS1
SDI CS C41 1
C C
1uF
3 14
SDO PR 2
HDR2 C25 C26
100uF 100uF
3

4 13
GND WP
D S

GND 10uH
C32 1
G
2

5 12
VSS VDD
Q2 R1 GND GND
2N7002 100K
R57 R58 .1uF
GND
6 11
A1 A2
0 0 GND
GND
7 10
W1 W2 +5VPA
C33
R59 R60 R61 R62 U10
8 9 +5VPA
B1 B2
* 0 0 * .1uF
GND
AD5235
GND
1
OUTA OUTD
14 C34 D1
GND GND 1 3

5
48V_CONT
2 13

MMBD914LT1
-INA -IND 1uF 3 MMBD914LT1
R63 2 4
C35
D2

1M TP4
1uF U11
1

3 12
+INA +IND SN74AHC1G14 +5VPA +3.3V

3
C36 U12
GND
4 11 GND GND
V+ V- GND R64
.1uF 8 1 2 1
GND PS_INHIBIT IN OUT
5 10 200
+INB +INC +5VPA
+3.3V C38
C37 5 2 DS1
SHDNn SENSE
+5VPA 6 9 10uF R65 C39
GND
R66 -INB -INC 5.49K

5
+5VPA +5VPA .1uF 10uF
2.43K GND
PA_BIAS R67

3
1
7 8

D S
GND
R68 OUTB OUTC R78
2.43K U13 4 1 1K
4
GND

GND

GND

GND
U14 G

2
NC
1K Q4
1 16
R69 2 MC74VHC1G 2N7002
CLK RDY
2.43K AD8574 R70

7
GND 3.16K
2 15
SDI CS GND LT1963
3

GND
3 14 PA_FAULT_RESET GND
MISO SDO PR
RF_DET GND
4 13
GND WP
C40
5 12
VSS VDD

R71 R72 .1uF

TEST GND STUD
D GND D
6 11
A1 A2
0 0
TP5
COPYRIGHT C 2011BROADCAST ELECTRONICS, INC.
7 10
W1 W2
PROPRIETARY RIGHTS are included in DWN. BY MATERIAL
R73 R74 R75 R76 JTB
* 0
8
B1 B2
9
0 *
MH1 information disclosed herein. This
information is submitted in confidence
BROADCAST ELECTRONICS INC.
MH2 CHKD SEE BOM 919-4035
AD5235 and neither this document nor the
GND GND
GND
MH3 information disclosed herein shall be
4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305 217/224-9600
MH4 reproduced or transferred to other TELEX 250142 CABLE BROADCAST FAX 217/224-9607
1
MH5
documents or used or disclosed to ME FINISH
others for manufacturing or for any
other purpose except as specifically
TITLE
STX RJ45 INTERFACE CONTROLLER
GND
authorized in writing by BROADCAST
PROJ. ENGR.
SCHEMATIC
ELECTRONICS, INC.
TYPE SIZE DWG. NO.
TOLERANCE (DECIMAL) U.O.S.
.x + .030 .xxx + .005 MFG. NEXT ASSY.
S D 919-4035 REV
C
.xx + .015 ANGLES + 1 MODEL SCALE
STXLP NONE SHEET 1 OF1

1 2 3 4
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 5-1-09 RELEASE TO PRODUCTION JTB

A A

L1

INPUT 1 95nH

C2 C1
22pF
C8
22pF
L2
12pF
B GND 95nH B
GND
GND
R102
100
C12 C3 C4
22pF 22pF

12pF
GND L3 GND GND

INPUT 2 95nH

C5 C6
22pF 22pF

GND GND
R110
100

L4

INPUT 3 95nH

C13
C7 C14
22pF 22pF
L5
12pF
GND R112 95nH
100 GND GND

C15 C9 C10
22pF 22pF

12pF
GND
GND GND
L6

INPUT 4 95nH

C11 C16
22pF 22pF

C C
GND GND

MH1 MH2
D MH3 MH4 D

MH5 MH6

MH7 MH8
MH9 MH10

MH11 DESIGNER MATERIAL

MH12
J BRENNAN BROADCAST ELECTRONICS INC.
MH13 MH14 ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

MH15 MH16
T HEA 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
MH17 MH18 information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
MH19 MH20
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP,COMBINER
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D 919-4040
DWG. NO. REV A
GND authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
1 11-20-09 PRELIMINARY RELEASE JTB
A 2-26-10 RELEASE TO PRODUCTION JTB

A A

GND-1 GND-1
GND-1

GND-1 GND-1 GND-1 GND-1

70.7 OHM GND-1
RF IN 1 L4 C14 L6 C13 L5
C12 10pF
2.2pF
120nH 120nH 15pF 120nH
3
QUARTER WAVE R14 R13 GND-1
2 R11 R12 1K 1K
294 294
C11 C10 C9 C8 R15 R16 R30 R29
1 R10 R9 300 300 1K 300 C22
J1 3.3pF
18.2 75
22pF 12pF 12pF 33pF
B B

RF SAMPLE

50 OHM
COMBINED RF OUT

FWD POWER C26

REF POWER 3.3pF
L15
280nH

C18 C17 C16 C15

R18 R17 C1 C2 C3 C4 C25
1 R1 R2
J2 1 3.3pF
18.2 75 J3

3
22pF 12pF 12pF 33pF 75 18.2

3
2 R19 33pF 12pF 12pF 22pF
294
R20 R22 R21 R23 R24 R26 R4 R3 2
3 294 R25 1K
C23 C27 R28 R8 R7 R5 R6 294
1K 1K 2 300 300 R27 294 3
70.7 OHM 4 5K 12pF C24 3-11pF 300 300 1K 2 5K 1K 1K GND GND
RF IN 2 3.3pF 4
5 C19 L7 C21 L9 C20 L8 L2 C6 L3 C7 L1 C5 5
2.2pF 120nH 120nH

1
GND 120nH 10pF 22pF
QUARTER WAVE GND GND GND 120nH 18pF 120nH 10pF 120nH 2.2pF

1
GND GND GND GND
GND GND
GND
GND

MH5
GND GND GND MH6
GND GND GND
MH7 MH1
MH4
MH8 MH2
MH9 MH3 GND-1
MH10

MH11 GND

MH12

C C

D D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

K MURPHY 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP 2 WAY COMB
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically
ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4045 REV A
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE 1:1 SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 4-25-09 RELEASE TO PRODUCTION JTB
B 7-11-09 ADD TEST POINTS JTB 11697
C 1-13-10 MADE L38 (350-202), MADE L39 (366-0022-001) JTB 11700
+5V
C2

.1uF
1
TP22 +5V
GND C1

+5V
U2 2 R2 3 C63

5
.1uF
LM35DZ 2.21K GND

+
R198 U1 R1 R54 3
C4 1

8
1K PA TEMP 1 .1uF
A 1000pF OPA830 GND A
100 100 D1

+
-
4 C3 C69 U34A 1 1 3
3

1000pF 1000pF
GND

2
LT1490
MMBD914LT1

-
GND GND 2

4
R4 GND
GND GND
4.32K
GND
R5
1.21K R56
TO DISPLAY FROM POWER SUPPLY C228
100uF GND
C229
100uF
TP3 +LV
GND
0
+LV L40
F5
C82 PA_TEMP
1 1
GND 1
J12A J4A
+5V 1uH
C12 20pF 2
2 J4B 10A R57
J12B
1 C111
C115 82.5K
.1uF
.1uF 3
1

.1uF
TP23 +5V 3 J4C
C6 J12C
1
GND GND 4
J4D
4 GND
R12 J12D
1 LED_PA_RF_DRIVE_STATUS GND
U8 2 3 5 LV_V+
5

.1uF J4E
GND 2.5V INDICATES 12V
LM35DZ 2.21K R80
5
+

U3 R6 R148 J12E
1 LED_PA_FOLDBACK_STATUS 22.1K
R199 C14 1 5 C129
PA TEMP 2
1K 1000pF OPA830 .1uF
100 100 D2 6
6 J4F PS_FAULT
-

C7 C154 J12F
1 LED_PA_VSWR_SHUTDOWN_STATUS
4 U34B 7 1 3 GND
3

1000pF 1000pF 7
2

LT1490 J4G +48V_CONT

GND MMBD914LT1 7
J12G
1 GND
GND GND 6 8
J4H PS_INHIBIT
R7 GND 8
GND GND R176 J12H
1
4.32K

*
GND
R9 9 C172
1.21K J12I1
*
GND
10
J12J1 GND
GND TO LOW PASS FILTER GND
+5V C33 R34
10K
1000pF
R102
1
1
J13A PA_FWD_POWER
100

2
1
J13B
B B
R110
3
1
J13C PA_REF_POWER
100

4 C49
1
J13D R50
1000pF 10K

5
1
J13E

6 GND GND
1
J13F

D10 7
L1 1
J13G

68uH 8
TP2 1
J13H
MBRS130 C15 +5V +5V
-12V C16
D11 22 C17 100uF GND
C19 1uF
L2 9
J13I
1
3 1 R238
C66 MUTE_STATUS 332
.1uF
LED_PA_VSWR_SHUTDOWN_STATUS
1uF MMBD914LT1 1UH 10
1
J13J
D18
LT1576 -12V 1 3

2
R19 DS32

3
+5V
+5V +5V GND

D S
1 8 MMBD914LT1 Q9

1
VSW S\H\D\N\ 45.3K
3
L3 2N7002 MUTE
R241 1
D40 G R242 TO CONTROL BOARD

2
R20 GND MMBD914LT1
1M R243 GND
1
2 7 10K
VIN FB/SENSE 10K
1UH 4.99K
C20 4

2
C21 GND

3
3 6 1

MMBD914LT1
100uF BOOST VC GND +5V J2A PA_FWD_POWER

D S
3
GND

3
390pF U40

D S
C22 Q7 1 1 2
D62 G J2B PA_REF_POWER

2
4 5 R22 2N7002 R245 LMV7219

1
GND BIAS 1
G 10K

2
Q20 J2C 3
U9 10K 3 PA1 CURRENT
-12V 1000pF 2N7002
R70 C44 +5V C124

5
100K C43
R23 GND J2D 4
R247 GND PA2 CURRENT
15K
8.66K 3 .1uF .1uF
5

PA_REF_POWER GND .1uF +5V 5

GND J2E PA3 CURRENT
TP24 GND D17
GND
3

R24 D12
BZX845V1LT1 U16 1 1 3 R69 GND 6
10K 3 J2F PA4 CURRENT

8
5.1V CTL_PA_BIAS
1

LMV7219 1K
MMBD914LT1 0 - 3.3V Full Scale 7
J2G

+
4 R73 R71 IPA_CURRENT
C45 2.2M U15A 1 DRIVER_BIAS
2

.01uF LT1490 100

C J2H 8 C

-
-12V DRIVER_CURRENT
C8 R74 VSWR SHDWN 2 C34
GND

4
.1uF 150K C153 9
1000pF J2I RF_INPUT_DET
GND
+5V
MC14013BD C48 J2J 10
.1uF PA_48V
R79
GND GND 1 14 R177 R172
+5V FAULT RESET QA VDD GND 11

*
.1uF 0 GND J2K PA_TEMP
1K
GND
R210 2 13 -12V J2L 12
QA QB
3
U17 VSWR_FOLDBACK_STATUS
332 GND D19
D S
R75
1 3 12 3 1 J2M 13
G CA QB OVERCURRENT FOLDBACK STATUS
2

RESET R76 10K

2

MMBD914LT1
TP1 DS7 10K 14
R190 Q13 +5V J2N LV_V+
4 11
1

+48V +48V ON 100K

2N7002 RA CB R250
NORMAL J2O 15
PS_FAULT
10K
C178 GND 5 10
DA RB

1
GND D21 16
J2P +48V_CONT
3

GND MMBD914LT1
47uF

3
R211 6 9
D S

332K C207 SA DB 17
1 J2Q CTL_PA_BIAS
G
2

1
47uF 7 8 D22 18
R212 Q16 C209 VSS SB MMBD914LT1 J2R PS_INHIBIT
+5V

3
100K
2N7002
J2S 19
47uF

GND GND GND 20

GND J2T MUTE_STATUS
1 J1A
GND J2U 21
FAULT RESET
C30 C167 2 J1B 5
C211 47uF BIAS 22
C233 C234 1uF J2V VSWR SHDWN
1uF +5V
1000pF 1000pF
R191 R87 23
U15B 7 J2W
100K IPA_BIAS
D7
3

LT1490 100

C130

C132

C143

C179

C180

C181

C182
C185

C196
R49 GND GND GND MMBD914LT1 24

C60
100K 6 C41 J2X
1

GND GND GND 1000pF

PA_48V 25
TP4 J2Y
R52 +LV +5V
3

10K D8 * * * * * * * * * *
D28 26
MMBD914LT1 J2Z
R88
1

3 3 1
J1C U13 GND
GND 3 2 +5V R89 10K
VIN LM317 OUT MH1
10K
MMBD914LT1 MH2
R3 GND
ADJ

4 GND C37 C38 GND

D J1D MH3 MH4 D
10uF 10uF 10K

1
D29
MH5 MH6
1

R63 MMBD914LT1

3
5 243
J1E MH7
GND MH8

1
GND D31 MH9 MH10
6 MMBD914LT1
J1F R217

3
R66 332 MH11 DESIGNER MATERIAL
MH12
7
715 J BRENNAN BROADCAST ELECTRONICS INC.
J1G
MH13 MH14 ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
GND
2

8
J1H GND DS10
MH15 MH16
T HEA 217/224-9600 FAX 217/224-9607
1

PROPRIETARY RIGHTS are included in

+5V ON information disclosed herein. This
MH17 MH18 information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
GND MH19 MH20
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP,PA
GND documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4050 REV C
GND authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 4
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

C171
REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
.1uF D13
C25 +5V
3.5V INDICATES 15A R27
3 1
A 4-25-09 RELEASE TO PRODUCTION JTB
OVERCURRENT THRESHOLD = 12A
100K +5V B 7-11-09 ADD TEST POINTS JTB 11697
C86 MADE L38 (350-202), MADE L39 (366-0022-001) JTB 11700
MMBD914LT1 C 1-13-10
TP5 .1uF +5V BIAS
GND
GND
C18 .1uF +5V C27

4
C26 GND U10 3
TP26 +5V
.1uF L4 GND

+
2 1 5 1 .1uF C176 R99 .1uF GND TP6
PA1 SUPPLY S- VCC R90 U27A 1 GND
1500 5 PA1 BIAS C50
+5V 24.9K GND LT1491CS 1K U18 1000pF
.1uF

-
R28 2 C10 2

1
.01 GND 3 D30 7
U6B 1 5

8
3W R254 GND VCC S- IPA_SUPPLY

11
+48V GND TP7 C134
F1 150 MMBD914LT1

3
L5 LT1490

+
R72 .1uF U6A +5V
2 1 2 1 4 3 3

5
S+ OUT 1 6
GND LT1490 C5 2
1500 511 .1uF GND R15
R178

+
R179

-
A 20A R10 R255 .04 A
C28 GND +LV

*
C235 ZXCT1080 1 2 0
3W
.1uF U12 PA1 CURRENT GND

4
.1uF R196
47uF OPA830 100 3 3 4

5
2.74K C166 D39 OUT S+
R100 -12V GND

-
4 C11 3 1 511
GND

+
1000pF

2
R95 R103 10K 1 U5 ZXCT1080 C56
GND R200 .1uF MMBD914LT1 IPA_CURRENT
GND 31.6K 10K +5V 1000pF
22.1K R180 R181 OPA830
GND

*
0 R175

-
GND 1V INDICATES 1A 4
R36 10K

2
GND GND -12V

1
1.33K
GND R96 D41
R37 GND
1K TP25 MMBD914LT1

3
GND
499K R13
C53

1
GND D42 1.50K R14
MMBD914LT1 1K

3
.047uF C206
+5V C9
D14 GND
.1uF D15 GND 1 3
R30 OVERCURRENT FOLDBACK 1 .1uF GND
C29 +5V 3 1 TP8
MMBD914LT1 GND C155
100K 1000pF
MMBD914LT1 U4
TP9 .1uF
GND +5V GND
1 5
C135 VCC S- DRIVER_SUPPLY
C32 GND U19 +5V
.1uF L9 TP27 +5V
2 1 5 1 C13 2
PA2 SUPPLY S- VCC R31 .1uF GND
1500 5 5 R29
24.9K .3
+5V GND +LV
GND 1W
R32 2 C23 .1uF R197 GND

1
R33 3 3 4

5
.01 GND 3 D20 U11B 7 7 OUT S+

8
+48V 3W U27B PA2 BIAS GND
511
F2 TP10 MMBD914LT1 LT1490

3
LT1491CS 1K

+
L10

+
R192 .1uF 1 U7 ZXCT1080 C161
2 1 2 1 4 3 3
5
S+ OUT U11A 1 6 6 DRIVER_CURRENT
GND OPA830 1000pF
1500 511 LT1490
+

-
20A R11 R35 3.5V INDICATES 0.5A 4
C236 C35 ZXCT1080 1 2 D23
.1uF U14 PA2 CURRENT

2
47uF OPA830 100 2.74K C168 R38
3 1
-

4 GND
C24 10K
1000pF MMBD914LT1
2

R40 R41 GND

GND GND .1uF +5V
31.6K 10K
R182 R183
GND

*
0 R8 R25
GND
10K
1.33K R26
GND GND -12V 1K

1
B GND B
D25
R42 MMBD914LT1

3
R43
GND
499K
R44 1.33K

1
1K C42 D26
MMBD914LT1

3
GND .047uF
C208
D27
GND 1 3
OVERCURRENT FOLDBACK 2
.1uF D32
R45 MMBD914LT1
C46 +5V 3 1
100K
MMBD914LT1
.1uF
TP11 GND +5V GND

C47 GND U21

C73
TP28 +5V
.1uF L11
2 1 5 1
PA3 SUPPLY S- VCC R46 .1uF
1500 5 10
+5V 24.9K
C31 GND
R47 2 GND

1
GND 3 R48
.01 D33 U20B 7 8

8
3W U27C PA3 BIAS
+48V F3 TP12 MMBD914LT1 LT1490

3
.1uF LT1491CS 1K
L12

+
R193 GND
2 1 2 1 4 3 3 U20A 1
5

S+ OUT 6 9
1500 511 LT1490
+

20A
C51 ZXCT1080 1
R17 R53
2 -
U22 PA3 CURRENT
.1uF
4

C237 OPA830 D34

100 2.74K C174 OVERCURRENT FOLDBACK STATUS
47uF R55
-

4 C36 3 1
1000pF R59
2

R58 10K
GND .1uF MMBD914LT1
31.6K 10K +5V
GND R184 R185
GND
*

0 R16
GND
10K
GND GND -12V

1
GND D36
MMBD914LT1

3
R61 R60

R62 1.33K

1
499K
1K D37
C57 MMBD914LT1

3
C210

C GND C
.047uF .1uF D38
D43 GND 1 3 LED_PA_FOLDBACK_STATUS
R64 OVERCURRENT FOLDBACK 3
C58 +5V 3 1
100K MMBD914LT1
MMBD914LT1

3
TP13 .1uF
GND +5V

D S
GND D3
C59 GND U25 +5V C230 1 3 1
TP29 G

2
.1uF L13 12
2 1 5 1 MMBD914LT1 Q11
PA4 SUPPLY S- VCC R65 .1uF
1500 5 R68 2N7002
+5V 24.9K
U27D 14
PA4 BIAS
GND C39 GND LT1491CS 1K
R67 2
1

GND 3 GND
.01 D44 U26B 7
8

3W 13
+48V
F4 TP14 MMBD914LT1 LT1490
3

L14 .1uF
+

R194 GND R112

2 1 2 1 4 3 3 U26A 1
5

S+ OUT 6 100K
1500 511 LT1490
+

20A C62 R18 R77

ZXCT1080 U30 1 2
.1uF PA4 CURRENT GND
4

OPA830 100 C175 D45

C238 2.74K
R78
-

47uF 4 C40 3 1
1000pF R82
2

R81 10K
.1uF MMBD914LT1
GND 31.6K
R186 10K +5V
R187
GND
*

GND 0 R111
GND
10K
GND GND -12V

1
GND
D54
3 MMBD914LT1
R84 R83

R85 1.33K
1

499K
1K D55
C71 MMBD914LT1
3

GND
.047uF D56
GND 1 3
+5V +5V OVERCURRENT FOLDBACK 4
MMBD914LT1 +5V
R113 +5V R86
R109 100K
332 332 +5V C54
R195
332
DS2 DS6 OVERCURRENT FOLDBACK STATUS .1uF GND
2

Overcurrent Foldback R104

2

VSWR Shutdown
150K C55 GND

5
D DS1 D

2
1
1

1 VSWR FOLDBACK

1
3 D5
5

PA_REF_POWER .1uF
4 1 3
TP30 GND
U23
1 2 MC74VHC1G
3

Q10 U24 MMBD914LT1

3

Q6
2N7002
D S

2N7002
D S

LMV7219
MATERIAL

3
1 1 DESIGNER
G 4
2

G J BRENNAN BROADCAST ELECTRONICS INC.

2

D S
3
2

R105 1 ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
G

2
100K
GND
GND T HEA 217/224-9600 FAX 217/224-9607
Q14
PROPRIETARY RIGHTS are included in
GND GND 2N7002 information disclosed herein. This
GND information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
VSWR SHDWN .x + .030
OVERCURRENT FOLDBACK STATUS GND information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP PA
VSWR_FOLDBACK_STATUS documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4050 REV C
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 2 OF 4
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 4-25-09 RELEASE TO PRODUCTION JTB
B 7-11-09 ADD TEST POINTS JTB 11697

1
C89 C 1-13-10 MADE L38 (350-202), MADE L39 (366-0022-001) JTB 11700
4 L16
470pF
GND 1
31nH
2
TO COMBINER INPUT 1
C92 GND
Q1A C90
R141 R142 R143 SD2932
22 22 22
270pF GND 1
C246
R140 C242 1000pF 100pF
2
49.9K 470uF C170
GND GND GND C100 C99
TP16 5 10pF
PA1 SUPPLY
PA1 BIAS
1000pF 4 100pF

3
3
D68 C107
A C190 C191 C96 C102 C220 C87 3 A

3
D49 MMBD914LT1 GND

1
10uF 470pF 470pF 470pF 470pF 470pF
BZX84C4V7LT1R137 2 GND T1

1
C101 50K 68pF
L22 * GND
1 3 GND

1
PA1 IN T2 C88 GND GND GND GND GND
22nH 1000pF
R138

1
2

4
C104 C105 D50 10K
4-25pF C108 C103 MMBD914LT1
C162 4-25pF R139

3
82pF GND 49.9K
39pF GND
270pF

2
GND GND C106 GND
GND 3
GND GND R144 R145 R146
GND 22 22 22 470pF
DC GND ONLY
Q1B
GND GND GND SD2932
GND

1
C160
4
L19
470pF
GND 1
31nH
2 TO COMBINER INPUT 2
C184
R125 R128 R130 Q2A GND
22 22 22 SD2932 C169
270pF
GND
R124 1
49.9K C247
C243 1000pF 100pF
GND GND GND PA2 BIAS 2
TP18 470uF C186
C189 C188

3
5 10pF
D61 PA2 SUPPLY

3
C140

3
D64 MMBD914LT1 1000pF 100pF
10uF

1
BZX84C4V7LT1 4
R115

1
2 C141 C146 C156 C144 C151 C202
L21 C195 50K 3
* 470pF 470pF 470pF 470pF 470pF GND
1 3 GND GND T7
PA2 IN T5

1
22nH D67 68pF
C158
MMBD914LT1
2

1000pF

3
C214 C218 GND GND GND GND GND GND
C165 C222 R116
4-25pF 4-25pF C201 10K
39pF 82pF
GND
B GND GND R122 B
270pF

2
GND GND 49.9K
C225 GND
GND GND 3
R154 R158 R160
GND 22 22 22
470pF
DC GND ONLY
Q2B
GND GND GND SD2932
GND

1
C91
4

470pF
C95 L17
R101 R98 R97 Q3A GND 1 2
22 22 22
270pF R94
SD2932
GND 31nH
TO COMBINER INPUT 3
49.9K GND
C93
GND GND GND PA3 BIAS TP15
C248 1
3

D57 C244 1000pF 100pF

2
3

C74 MMBD914LT1 470uF C97

3

10uF
1

D58 C112 C98

BZX84C4V7LT1R91 5 10pF
50K 2 PA3 SUPPLY
1

1000pF 4 100pF

L18 GND
C120
1

1 3 C85 C75 C78 C83 C76 C80 3 GND

1

PA3 IN T3 D59 470pF 470pF 470pF 470pF 470pF

22nH C116 1000pF GND T4
MMBD914LT1 R92
3

* 68pF
2

C125 C121 10K

4-25pF 4-25pF C127 C119
C94 82pF
GND
GND GND GND GND GND GND
39pF GND R93
GND 49.9K
270pF GND
2

GND GND C128

C GND 3 C
GND R108 R107 R106
22 22 22
GND 470pF
DC GND ONLY
Q3B
GND GND GND SD2932
GND
1

C163 L20
4 1 2
GND
31nH TO COMBINER INPUT 4 NOTES:
470pF GND
C183 C173
Q4A
R149 R132 R131 TP17
R120 SD2932
C249
1 C101,C116,C194,C195 PLACED ON HIGHER LEVEL ASSY
22 22 22 270pF 49.9K GND C245 100pF
1000pF 2
470uF C187
PA4 BIAS C192 C193
5
PA4 SUPPLY 10pF
GND GND GND
3

D63 1000pF 100pF

3

4
MMBD914LT1
3

D66
1

C137 C203
10uF BZX84C4V7LT1
R114 2 C145 C152 C157 C147 C142 3
470pF 470pF 470pF GND
1

50K 470pF 470pF

GND T8
L24
1 3 C194 68pF
PA4 IN GND
1
1

22nH *
D70 C159 GND
MMBD914LT1 1000pF GND GND GND GND GND
2

D C205 C204 R119 D

C164 4-25pF T6
4-25pF C197 10K
39pF
GND
GND GND R123
270pF
2

GND GND C223 GND 49.9K

C224
GND 82pF
R165 R163 R162 3
22 22 22
GND DESIGNER MATERIAL
DC GND ONLY 470pF
J BRENNAN BROADCAST ELECTRONICS INC.
GND Q4B 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305
GND ENGINEER FINISH
GND GND SD2932
GND T HEA 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP PA
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPES SIZED DWG. NO. 919-4050 REV C
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 3 OF 4
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 4-25-09 RELEASE TO PRODUCTION JTB
B 7-11-09 ADD TEST POINTS JTB 11697
C 1-13-10 MADE L38 (350-202), MADE L39 (366-0022-001) JTB 11700
P6

J6

1
GND GND L36 C240

130nH
39pF
PA1 IN
C226 GND
A 18pF A
P10 R189
10W

J10 GND
4

1
L32 L33

130nH 130nH

GND
GND C213 C212
18pF 18pF
PA2 IN
SPLITTER
GND GND
P5 R188
20W
J5
4

L34 L35

130nH 130nH

GND GND
C216 C217
18pF
C215
PA3 IN 18pF 39pF

P9 R157
10W
J9 GND GND
GND
4

L37

130nH

GND GND
C227 C241
18pF 39pF
PA4 IN

GND GND

B B

LED_PA_RF_DRIVE_STATUS

+5V

R220
332
R221
1K

2
-12V DS12
C110
RF DRIVE

1
+5V
C109 .1uF
GND
+5V R222 3 P1

3
.1uF Q17
+5V 2N7002

D S
GND 1K

-
6 U29A 1 1
C113 TP19 G -12V

2
AD8361 TL072ACD

3
10uF R223

HDR3
+
1 8 U29B 150K J7
VPOS SREF 7 RF_INPUT_DET 2
TL072ACD C221 BIAS

8
3 R39
R268 R147 D51 100K
2 7 5 R224
IREF VRMS MMBD914LT1 GND
1

100 1K C52 100K

.1uF R51
L23 C114 R150 .1uF
+5V GND 1

2
3 6 *
RFIN FLTR C198 10K
100nH GND
1000pF Q5
.1uF +5V C61

3
4 5 GND R151 .1uF BSS84LT1
C117 C118 R152 PWDN COMM GND GND
39pF 22pF 64.9
C R153 3.01K C
U32
GND 1K
GND GND GND GND
GND GND GND
GND

MMBD914LT1 BZX84C4V7LT1
3 1 1 3

D47 D48
L6
GND
D85
DRIVER_SUPPLY C231 C232
R117 3 1 10uH GND
1 2 220uF 220uF
DRIVER_BIAS
0
TP20 C67 GND C150
C64
MMBD914LT1 C68 10uF C219 L25
1000pF
C65 30pF
3

10uF L7 .1uF
.1uF R118 MMBD914LT1
P3 R155 IPA_SUPPLY
1K L8 1 2 3 1 1uH
R121 2 IPA_BIAS TP21 C123
380nH GND J3 C122
10K 0
GND 10uH 10uF .1uF
GND D69

3
R134 L27 C126

3
GND C70 GND D52
4

1
1

1000pF C199 C200 BZX84C4V7LT1 1000pF

294 .1uF 10uF R159 2

1
R127 10K 10uH GND P2
GND 49.9K L26 C72 GND
GND GND R161 L28
DRIVER RF IN C131 J8
1

1
GND D53 1000pF 111nH GND
1

J11 56nH GND GND MMBD914LT1

*
C239

4
L15 C84
3
R129 R126 1000pF
1 SMA 1 2 3 GND
10 68nH C79 GND C177
2

0
1000pF 1000pF 39pF GND 100pF
2 GND
R136 R156
3
R135 C81 30.1 1 R133 2 Q12 L30 L31 L29 C133 GND GND
432 432 PD55003-E SPLITTER
4 39pF R269
0 5nH 18nH 47nH

1
5 GND R166
GND 22
L38 L39 C77 1000pF
GND R168 R167 49.9K
GND GND 2 C138 C139 C136
GND 22 39nH 22nH * 180pF 120pF 47pF
GND 1000pF Q8
C149 R164 R169 PD85035C
R270 R173 R174 R21 R171
1K 1K 1K
C148 120pF 43 43
1K
47pF
* GND
GND GND
GND
GND GND R170
GND GND GND GND
D GND GND * D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

T HEA 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP PA
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPES SIZE D 919-4050
DWG. NO. REV C
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 4 OF 4
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 8-20-09 RELEASE TO PRODUCTION JTB

A A

J2
C15 C16 C17 C18
R17 R18
1
75 18.2
33pF 12pF 12pF 22pF
R20 R19 2
R21 R22 294 294 3
1K 1K
4
C20 C21 L7 C19 5
L8 L9
120nH 15pF 120nH 10pF 120nH 2.2pF GND
REF POWER GND GND GND

R25 GND
5K
3 1

2
GND GND GND
R23
300
R24
300
R26
B B
300

GND

J3
C1 C2 C3 C4
R1 R2
1
75 18.2
33pF 12pF 12pF 22pF
R4 R3 2
R5 R6 294 294 3
1K 1K
4
C6 C7 L1 C5 5
L2 L3
120nH 15pF 120nH 10pF 120nH 2.2pF GND
FWD POWER GND GND GND

R27 GND
5K
3 1
2

GND GND GND

R7
300
R8
300
R28

300

GND

J1
C8 C9 C10 C11
R9 R10
1
75 18.2
33pF 12pF 12pF 22pF
R12 R11 2
R13 R14 294 294
1K 1K 3

C L5 C13 L6 C14 L4 C12 C

120nH 15pF 120nH 10pF 120nH 2.2pF GND
RF SAMPLE GND GND GND GND

R15
300 GND GND GND
R16
300
R29

300

GND

D D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

K MURPHY 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP 3 WAY COMB
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D 919-4065
DWG. NO. REV A
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN
A 11-4-09 RELEASE TO PRODUCTION JTB

A A

GND-1 GND-1
GND-1

GND-1 GND-1 GND-1 GND-1

86.6 OHM GND-1
RF IN 1 L4 C14 L6 C13 L5
C12 10pF
120nH 120nH 15pF 120nH
3 2.2pF
QUARTER WAVE R14 R13 GND-1
2 R11 R12 1K 1K
294 294
C11 C10 C9 C8 R15 R16 R30 R29
1 R10 R9 300 300 1K 300 C22
J1 3.3pF
18.2 75
22pF 12pF 12pF 33pF
B B

RF SAMPLE

86.6 OHM 50 OHM

RF IN 2 COMBINED RF OUT
QUARTER WAVE
FWD POWER C25
REF POWER 4.7pF
L15
280nH

C18 C17 C16 C15

R18 R17 C1 C2 C3 C4 GND
1 R1 R2
J2 1
18.2 75 J3
75 18.2

3
22pF 12pF 12pF 33pF
2 R19 33pF 12pF 12pF 22pF

3
294
R20 R22 R21 R23 R24 R26 R4 R3 2
3 294 R25 C23 C27 R28 R8 R7 R5 R6 294
1K 1K 2 300 300 300 R27 294 3
86.6 OHM 4 5K 3.3pF C24 3-11pF 300 300 300 2 5K 1K 1K GND
RF IN 3 3.3pF 4
5 C19 L7 C21 L9 C20 L8 L2 C6 L3 C7 L1 C5 5
2.2pF 120nH 10pF 120nH 15pF 120nH
QUARTER WAVE GND

1
GND GND GND 120nH 15pF 120nH 10pF 120nH 2.2pF GND

1
GND GND GND
GND GND
GND
GND

MH5
GND GND GND MH6
GND GND GND
MH7 MH1
MH4
MH8 MH2
MH9 MH3 GND-1
MH10

MH11 GND

MH12

C C

D D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

K MURPHY 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, STX LP 3 WAY COMB
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4065-001 REV A
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN

A 11-06-09 RELEASE TO PRODUCTION JTB

A A

111.8 OHM
RF IN 1
QUARTER WAVE
B B

GND-1 GND-1 GND-1

GND-1
111.8 OHM GND-1 GND-1 GND-1 GND-1
GND-1
RF IN 2 C12 L4 C14 L6 C13 L5 R15 R16 R29 R30
300 300 C24
QUARTER WAVE 3
2.2pF 120nH 10pF 120nH 15pF 120nH
300 1K
12pF
R12 R14 R13
2 R11 1K 1K
294 294
C11 C10 C9 C8
1 R10 R9
J1
18.2 75
22pF 12pF 12pF 33pF

RF SAMPLE

111.8 OHM 50 OHM

RF IN 3 COMBINED RF OUT
QUARTER WAVE
C26
FWD POWER REF POWER 15pF
L15
280nH
C18 C17 C16 C15 C1 C2 C3 C4
R18 R17 R1 R2 1
1 J3
J2
18.2 75 75 18.2 C25
22pF 12pF 12pF 33pF 33pF 12pF 12pF 22pF
2 R19 R20 R3 2 15pF
R4
3 294 294 R22 R21 R5 R6 294 294 3
1K 1K 1K 1K
4 4

3
111.8 OHM 5 C19 L7 C21 L9 C20 L8 L2 C6 L3 C7 L1 C5 5 GND GND

3
RF IN 4 2.2pF 120nH 10pF 15pF R25 R23 R24 R26 C22 15pF 10pF 120nH 2.2pF
GND GND 120nH 120nH
GND GND C23 C27 R28 GND GND 120nH 120nH GND GND
2 300 300 300
12pF R8 R7
3-11pF R27
QUARTER WAVE 5K 3.3pF 300 300 300 2
5K
GND GND

1
GND GND
MH5
GND GND GND GND GND GND
MH6

C
MH7 MH1 C
111.8 OHM MH4
MH8 MH2
RF IN 5
MH9 MH3 GND-1
QUARTER WAVE
MH10

MH11 GND

D D

DESIGNER MATERIAL
J BRENNAN BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

K MURPHY 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, 5 WAY COMBINER
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4085-001 REV A
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6 7 8

REVISIONS
REV DATE DESCRIPTION DRAFTER ECN

A 14JUL11 RELEASE TO PRODUCTION DLR

A A

111.8 OHM
RF IN 1
QUARTER WAVE
B B

GND-1 GND-1 GND-1

GND-1
111.8 OHM GND-1 GND-1 GND-1 GND-1
GND-1
RF IN 2 C12 L4 C14 L6 C13 L5 R15 R16 R29 R30
301 301 C24
QUARTER WAVE 3
2.2pF 120nH 10pF 120nH 15pF 120nH
301 1K
12pF
R14 R13
2 R11 R12 1K 1K
301 301
C11 C10 C9 C8
1 R10 R9
J1
18.2 75
22pF 12pF 12pF 33pF

RF SAMPLE

111.8 OHM 50 OHM

RF IN 3 COMBINED RF OUT
QUARTER WAVE C26
REF POWER 4.7pF
FWD POWER
L15
280nH
C18 C17 C16 C15 C1 C2 C3 C4 C25
R18 R17 R1 R2 1 10pF
1 J3
J2
18.2 75 75 18.2
22pF 12pF 12pF 33pF 33pF 12pF 12pF 22pF 2
2 R19 R20 R4 R3 GND
3 301 301 R22 R21 R5 R6 301 301 3
1K 1K 1K 1K
4 4

3
111.8 OHM 5 C19 L7 C21 L9 C20 L8 L2 C6 L3 C7 L1 C5 5 GND

3
RF IN 4 2.2pF R23 R24 R26
GND GND
120nH 10pF 120nH 15pF 120nH
GND GND
R25 C22 C23 C27 R28 GND GND
120nH 15pF 120nH 10pF 120nH 2.2pF
GND GND
2 301 301 301
12pF R8 R7
3-11pF R27
QUARTER WAVE 5K 3.3pF 301 301 301 2
5K
GND GND

1
GND GND
MH5
GND GND GND GND GND GND
MH6

C
MH7 MH1 C
111.8 OHM MH4
MH8 MH2
RF IN 5
MH9 MH3 GND
QUARTER WAVE
MH10

MH11 GND

D D

DESIGNER MATERIAL
D Raab BROADCAST ELECTRONICS INC.
ENGINEER FINISH 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305

J Simpson 217/224-9600 FAX 217/224-9607

PROPRIETARY RIGHTS are included in

information disclosed herein. This
information is submitted in confidence TOLERANCE U.O.S.
and neither this document nor the
.x + .030
information disclosed herein shall be
reproduced or transferred to other .xx + .015 TITLE SCHEMATIC, 5 WAY COMBINER
documents or used or disclosed to .xxx + .005
others for manufacturing or for any
other purpose except as specifically ANGLES + 1 TYPE S SIZE D DWG. NO. 919-4085-100 REV A
authorized in writing by BROADCAST
ELECTRONICS, INC. MODEL STX LP SCALE SHEET 1 OF 1
1 2 3 4 5 6 7 8
 1 2 3 4 5 6

D 15DEC12 ADDED JUMPERS P7&P8(340-0004) DLR 11933 REVISION HISTORY

REV DATE DESCRIPTION DRAWN ECN
A 08JUN11 PRELIMINARY RELEASE DLR
B 29JUL11 ADDED FAN CONTROL DLR
5 1
+VE J1E J5A C 25AUG11 CHANGED U1 TO 221-0555 DLR
31 J1AE J2C 3
DC_OK_H PS_FAULT
PS_FAULT
6
FAN CONTROL +12V
+VE J1F
A 2 A
J5B J1W 1
23 J2E 5
J6A
VPGM
V_CONTROL
7 VOLTAGE CONTROL
+VE J1G
+12VF
3 C1
8 J5C
+VE J1H 2
J6B
*
3
9 GND J6C
+VE J1I
D1
10
30V D2
+VE J1J +12VF 30V
J4 1
11 D
J1K Q4 FDS5680 6
+VE J6F
2
Q5
2N7002 9
J1L 12 D J6I
+VE 1
D Q6
+12V +12VF G 1
FDS5680

+VE SENSE J1V 22 2 2 P7

R1 R2
1K 4.99K
S 2 2 P8
AC(N) J1AT 46 AC(N) J3A 1 G
1 U2 4 +12VF 3 3 G
B B
J1M 13 4 PS2705-1 HDR3 3 3
-VE J5D J7 HDR3
D S
AC(L) J1AU 47 AC(L) J3B 2 Q3 J8
S
J1N 14
-VE 5 2N7002 FGND
J5E FGND
GND-EARTH J1AS 45 J3C 3 2 3 G
-VE J1O 15
6
J5F FGND +12VF S +12VF
J1P 16 J3D 4 4
-VE J6D
R5 FAN POWER INPUT
5
GND 4.99K J6E
J1Q 17 R6
-VE 1K 8
J6H
FAN CONTROL RETURN
7
18 J6G
-VE J1R
FGND +12VF
J2D 4
FGND
J1S 19
-VE D Q2
Q1

8
C 33 J2A 1 D 2N7002 U1 C
-VE J1T 20 LOGIC RETURN J1AG 2N7002 RST VCC
R3
4.22K C4
GND G G 3 7 .01uF
OUT DISC
27 J2F 6 NE555D
-VE SENSE J1X 24 REMOTE_ON J1AA R4
5 6 1.69K
CTL V THRES
S S FGND
C2
.01uF GND TRIG C3
GND J2B 2
GND FGND .01uF

2
J1U 21 FGND
REMOTE_ON(RETURN) FGND
FGND

GND

I SHARING J1Z 26 NOT USED COPYRIGHT C 2011BROADCAST ELECTRONICS, INC.

DWN. BY MATERIAL
PROPRIETARY RIGHTS are included in R
28 information disclosed herein. This
OPT_WARNING J1AB NOT USED information is submitted in confidence
NOTES: and neither this document nor the BROADCAST ELECTRONICS INC.
CHKD
information disclosed herein shall be 4100 N. 24TH ST., P.O.BOX 3606 QUINCY, IL. 62305 217/224-9600
D reproduced or transferred to other FINISH D
TELEX 250142 CABLE BROADCAST FAX 217/224-9607
AC_OK_H J1AJ 36
NOT USED documents or used or disclosed to
* DENOTES NOT PLACED......C1 others for manufacturing or for any ME TITLE
other purpose except as specifically
authorized in writing by BROADCAST
P/S PRESENT J1AL 38 NOT USED ELECTRONICS, INC.
PROJ. ENGR. SCHEMATIC
NEXT ASSY. TYPE SIZE DWG. NO. REV
TOLERANCE (DECIMAL) U.O.S.
.x +/- .030 .xxx +/- .005 MFG.
S
.xx +/- .015 ANGLES +/- 1 MODEL SCALE SHEET OF

1 2 3 4 SEE BOM 5 6 12/19/2011

1:39:25 PM
919 4090 200
NOTES
1. AIR INLET AT FRONT OF TRANSMITTER.
2. AIR OUTLET AT REAR OF TRANSMITTER.
3. GROUND LUG.
4. OUTPUT RF CONNECTION – TYPE ‘N’.
5. WEIGHT – 40 LBS (18.2 kg).
6. UNPACKED CUBAGE – 1.5 FT3 (0.04 m3).
7. AC POWER INPUT – 180V TO 260V AC 47 TO 63 Hz.
8. AC LINE CURRENT – 20 Amps MAX.
9. PRIMARY AC DISCONNECT –
FUSE/CIRCUIT BREAKER – 20 Amps.
WIRE SIZE – 12 AWG TYPE THHN.
10. POWER CONSUMPTION – 1.75 kW (CALCULATED).
11. COOLING REQUIREMENTS – 200 CFM (5.6 m3/min).
12. HEAT DISSIPATION – 750W AT 1 kW RF OUTPUT INTO A 50 OHM LOAD.
13. BTU – 2560 BTU/H AT 1 kW RF OUTPUT INTO A 50 OHM LOAD.
14. POWER FACTOR – GREATER THAN 0.98.

STXLP 1 kW INSTALLATION DIAGRAM –

597-4102-4
 4

2
1
7.45

NOTES
COMBINER 2
1. AIR INLET AT FRONT OF TRANSMITTER.
2. AIR OUTLET AT REAR OF TRANSMITTER.
3. GROUND LUG.
4. OUTPUT RF CONNECTION – 1 5/8" Hard Line Coax
5. WEIGHT – 130 LBS (59.0 kg).
2.50 6. UNPACKED CUBAGE – 5.7 FT3 (0.16 m3).
7. AC POWER INPUT -
180V TO 260V AC 47 TO 63 Hz SINGLE PHASE.
8. AC LINE CURRENT –
32 Amps MAX SINGLE PHASE.
3 9. PRIMARY AC DISCONNECT -
SINGLE PHASE–
FUSE/CIRCUIT BREAKER – 40 Amps.
17.5
WIRE SIZE – #8 AWG TYPE THHN.
FOR PROPER FUSE/CIRCUIT BREAKER SIZE, REFER TO
NATIONAL ELECTRIC CODES AND LOCAL CODES.
10. POWER CONSUMPTION – 3.5 kW (CALCULATED).
11. COOLING REQUIREMENTS – 600 CFM (17.0 m3/min).
12. HEAT DISSIPATION – 1550W AT 2 kW RF OUTPUT INTO A 50 OHM LOAD.
13. BTU – 5295 BTU/H AT 2 kW RF OUTPUT INTO A 50 OHM LOAD.
14. POWER FACTOR – GREATER THAN 0.98.

4.10 9.53

STXLP 2 kW INSTALLATION DIAGRAM –

597-4102-37
 4

2
7.45
1

NOTES
1. AIR INLET AT FRONT OF TRANSMITTER.
2. AIR OUTLET AT REAR OF TRANSMITTER.
3. GROUND LUG.
4. OUTPUT RF CONNECTION – 1 5/8" Hard Line Coax
5. WEIGHT – 170 LBS (77.1 kg).
6. UNPACKED CUBAGE – 7.4 FT3 (0.21 m3).
7. AC POWER INPUT -
180V TO 260V AC 47 TO 63 Hz SINGLE PHASE.
2.50
180V TO 260V AC DELTA OR 311V TO 449V AC WYE
47 TO 63 Hz THREE PHASE
8. AC LINE CURRENT –
48 Amps MAX SINGLE PHASE.
28 Amps MAX THREE PHASE.
3 9. PRIMARY AC DISCONNECT -
SINGLE PHASE–
FUSE/CIRCUIT BREAKER – 60 Amps.
WIRE SIZE – #4 AWG TYPE THHN.
THREE PHASE –
FUSE/CIRCUIT BREAKER – 30 Amps.
WIRE SIZE – #10 AWG TYPE THHN.
FOR PROPER FUSE/CIRCUIT BREAKER SIZE, REFER TO
NATIONAL ELECTRIC CODES AND LOCAL CODES.
10. POWER CONSUMPTION – 5.3 kW (CALCULATED).
11. COOLING REQUIREMENTS – 800 CFM (22.7 m3/min).
12. HEAT DISSIPATION – 2300W AT 3 kW RF OUTPUT INTO A 50 OHM LOAD.
13. BTU – 7850 BTU/H AT 3 kW RF OUTPUT INTO A 50 OHM LOAD.
14. POWER FACTOR – GREATER THAN 0.98.

STXLP 3 kW INSTALLATION DIAGRAM –

597-4102-7
 4

NOTES
1. AIR INLET AT FRONT OF TRANSMITTER.
2. AIR OUTLET AT REAR OF TRANSMITTER.
3. GROUND LUG.
4. OUTPUT RF CONNECTION – 1 5/8" Hard Line Coax
5. WEIGHT – 250 LBS (113.4 kg).
6. UNPACKED CUBAGE – 10.8 FT3 (0.31 m3).
7. AC POWER INPUT –
180V TO 260V AC 47 TO 63 Hz SINGLE PHASE.
180V TO 260V AC DELTA OR 311V TO 449V AC WYE
47 TO 63 Hz THREE PHASE
8. AC LINE CURRENT –
7.45 80 Amps MAX SINGLE PHASE.
47 Amps MAX THREE PHASE.
9. PRIMARY AC DISCONNECT -
SINGLE PHASE –
FUSE/CIRCUIT BREAKER – 100 Amps.
WIRE SIZE – #2 AWG TYPE THHN.
THREE PHASE –
FUSE/CIRCUIT BREAKER – 60 Amps.
WIRE SIZE – #4 AWG TYPE THHN.
FOR PROPER FUSE/CIRCUIT BREAKER SIZE, REFER TO
2.50 NATIONAL ELECTRIC CODES AND LOCAL CODES.
10. POWER CONSUMPTION – 8.8 kW (CALCULATED).
11. COOLING REQUIREMENTS – 1200 CFM (34.0 m3/min).
12. HEAT DISSIPATION – 3800W AT 5 kW RF OUTPUT INTO A 50
OHM LOAD.
2 13. BTU – 13000 BTU/H AT 5 kW RF OUTPUT INTO A 50 OHM LOAD.
33.22 14. POWER FACTOR – GREATER THAN 0.98.

3 1

3.00

STXLP 5 kW INSTALLATION DIAGRAM –

597-4102-15
ACCEPTABLE THREE PHASE AC INPUT CONFIGURATIONS.

The STXLP 3kW and 5kW transmitters can be operated from a three-phase power supply if
desired. If the transmitter is to be operated from a three phase power supply, the transmitter
must be connected to a closed-delta or wye connected three-phase power source. Operation
from an unsatisfactory power source will void the warranty on the transmitter as any resultant
damage is beyond the control of the manufacturer. Before attempting installation of the
transmitter, assure that the proper power source is installed.
An open-delta, V to V, T to T, T to L, or Scott connected power source will provide
unsatisfactory transmitter performance as transients and unstable power can damage
components of the transmitter and provide degraded specifications. Any of these systems
will develop a considerable imbalance between phases in voltage, phase angle, or both
voltage and phase angle. These problems can result in premature failure of power supply
and RF circuit components.
It is important that the local electric utility be consulted to ensure that the correct service is
provided before connection of the transmitter to a primary power source. The proper power
source can be readily identified by the use of three transformers with one winding each or
one transformer with three windings instead of the use of two transformers as required for
the unacceptable configurations.

STXLP – MAIN THREE PHASE POWER SUPPLY –

SHEET 1 OF 2
597-4102-29
 #10 AWG
#10 AWG
#10 AWG
311-449VAC THREE PHASE WYE
#10 AWG
180-260VAC THREE PHASE DELTA 30 Amp AC POWER SOURCE
30 Amp AC POWER SOURCE #10 AWG
#10 AWG
#10 AWG

STXLP 3KW THREE PHASE WYE

STXLP 3KW THREE PHASE DELTA

#4 AWG #4 AWG

180-260VAC THREE PHASE DELTA #4 AWG

311-449VAC THREE PHASE WYE #4 AWG
60 Amp AC POWER SOURCE
60 Amp AC POWER SOURCE
#4 AWG #4 AWG

#4 AWG

STXLP 5KW THREE PHASE DELTA STXLP 5KW THREE PHASE WYE
NOTES –
FOR PROPER FUSE/CIRCUIT BREAKER SIZE, REFER TO
NATIONAL ELECTRIC CODES AND LOCAL CODES. STXLP – MAIN THREE PHASE POWER SUPPLY –
SHEET 2 OF 2
597-4102-30
 1 5/8" RF Output – To
Antenna Or Dummy Load.
90 Degree Elbow Is Optional
RF Sample – To
Modulation Monitor Or
Spectrum Analyzer Must use BE combiner
cable P/N 959-4106

Minimum Conductor –
No. 8 Copper Wire
Must use BE splitter
Type THHN cable P/N 959-4105
2 Inch Wide
Copper Ground
Earth Strap
Ground Chassis
Ground
Must use Ethernet cable with Ferrite
20A Breaker Ring (P/N 375-0009). Min 2 wraps.
Neutral - Wht Ring at both ends of cable.

20A Breaker
Line - Blk 40A

40A 240V
Single Phase
Fused Disconnect 20A Breaker
Distribution

European
180 to 260 V
40A Single Phase
AC Power Source

Minimum Conductor –
No. 12 Copper Wire
Type THHN

Minimum Conductor – 2 Inch Wide

Copper Ground
No. 8 Copper Wire Strap Must use BE splitter
Type THHN cable P/N 959-4105

Earth
Ground Chassis
Ground

20A Breaker
Line - Blk 40A

20A Breaker
Line - Wht 40A
20A Breaker
40A 240V Distribution
Single Phase
Fused Disconnect

North American
180 to 260 V
40A Single Phase
AC Power Source

2 Inch Wide
Copper Ground
Strap
DIAGRAM 597-4102-35
STXLP 2 kW CONNECTION
 1 5/8" RF Output – To
Antenna Or Dummy Load.
90 Degree Elbow Is Optional
RF Sample – To
Modulation Monitor Or
Spectrum Analyzer Must use BE combiner
cable P/N 959-4106

Must use BE splitter

2 Inch Wide cable P/N 959-4105
Copper Ground
Strap

Must use Ethernet cable with Ferrite

Ring (P/N 375-0009). Min 2 wraps.
Ring at both ends of cable.

Minimum Conductor –
No. 12 Copper Wire
Type THHN

Minimum Conductor – 2 Inch Wide

Copper Ground
No. 4 Copper Wire Strap Must use BE splitter
Type THHN cable P/N 959-4105

Earth
Ground Chassis
Ground

20A Breaker
Line - Blk 60A

20A Breaker
Line - Wht 60A
60A 240V
20A Breaker
Single Phase
Fused Disconnect 20A Breaker
Distribution

North American
180 to 260 V
60A Single Phase
AC Power Source

Minimum Conductor –
2 Inch Wide
No. 4 Copper Wire Copper Ground
Type THHN Strap

Earth
Ground Chassis
Ground
20A Breaker
Neutral - Wht

20A Breaker
Line - Blk 60A

60A 240V 20A Breaker

Single Phase
Fused Disconnect 20A Breaker
Distribution

European
180 to 260 V
60A Single Phase
AC Power Source

2 Inch Wide
Copper Ground
Strap
DIAGRAM 597-4102-5
STXLP 3 kW CONNECTION
 Must use BE combiner
RF Sample – To 1 5/8" RF Output – To Antenna cable P/N 959-4106
Modulation Monitor Or Or Dummy Load. 90 Degree
Spectrum Analyzer Elbow Is Optional.

2 Inch Wide
Copper Must use BE splitter
Ground Strap cable P/N 959-4105

Must use Ethernet cable with Ferrite

Ring (P/N 375-0009). Min 2 wraps.
Ring at both ends of cable.

2 Inch Wide
Copper Must use BE splitter
Ground Strap cable P/N 959-4105

Minimum Conductor –
No. 12 Copper Wire
Type THHN

Minimum Conductor –
No. 2 Copper Wire
Type THHN

Earth
Ground Chassis
Ground

20A Breaker 2 Inch Wide

Line - Blk 100A Copper
Ground Strap

20A Breaker
Line - Wht 100A

20A Breaker
100A 240V
Single Phase
Fused Disconnect
20A Breaker

20A Breaker
20A Breaker
Distribution

North American
180 to 260 V
100A Single Phase
AC Power Source 2 Inch Wide
Copper
Ground Strap

Minimum Conductor –
No. 2 Copper Wire
Type THHN

Earth
Ground Chassis
Ground 20A Breaker

Neutral - Wht
20A Breaker

Line - Blk 100A 20A Breaker

100A 240V 20A Breaker

Single Phase
Fused Disconnect
20A Breaker 2 Inch Wide
20A Breaker Copper
Distribution Ground Strap

European
180 to 260 V
100A Single Phase
AC Power Source

2 Inch Wide
DIAGRAM 597-4102-6

Copper
Ground Strap
STXLP 5 kW CONNECTION
 1 mW MAX INPUT
100 mW MAX INPUT

EXT EX FLT IN – PIN 10

N/A
HD MODE INPUT – PIN 14 FAILSAFE - PIN 2
NOT USED
FM+HD MODE INPUT – PIN 13 J3-1 AFC_NO
NOT USED GND – PIN 12
FM MODE INPUT – PIN 11 J3-2 AFC_COM
NOT USED MUTE STATUS – PIN 24
HD PWR CONTROL – PIN 35 J3-14 UNMUTE
J3-23 HD POWER CNTL IN RF OUT
FAILSAFE - PIN 2 RF OUT
J3-1 AFC_NO ATTENUATOR +V
ATTENUATOR +V
GND – PIN 12 FXI-60/FXI-250 EXCITER
J3-2 AFC_COM
MUTE STATUS – PIN 24
J3-14 UNMUTE EXT EX RELAY CTRL - PIN 36
EXT RELAY
EXT RELAY
FXI-60/FXI-250 EXCITER
EXT EX RELAY CTRL - PIN 36
FM ONLY CONNECTIONS

HD CONNECTIONS

BEI FXI-60/FXI-250 TO STXLP CONNECTIONS

597-4102-14
 ETHERNET REMOTE
STATUS/CONTROL
SD

HEW LETT DLT

PAC KA RD SureStore
A utoloade718
r

ETHERNET
< TX OFF > RAM
FLASH
0W MEMORY HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD

FRONT PANEL SD

CONTROL TO
DISPLAY PCB
HEW LE TT D LT
PAC KAR D SureStore
Au tol oader718

SPI INTERFACE - PAs AND COMB/

PA2 – PA5 HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD

SPLITTER
FRONT PANEL LEDS COMB/SPLITTER
HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD
STATUS FROM
PAs AND COMB/
HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD
SPLITTER

FPGA CONTROLLER
ISOLATORS

REMOTE STATUS
D/A
PILOT OUT DAC
CONVERTER
REMOTE LEVELS

OPTIONAL
AES REMOTE INPUTS
STEREO
ANA GENERATOR
TO DIG POTS
ANALOG L SAMPLE RATE CONTROLLER PCB
DIG
CON CONVERTER

ANALOG R
ANA TO DIG
DIGITAL POTS
POWER POWER CONVERTERS
SUPPLIES SUPPLIES
DSP/CONTROLLER

COMPOSITE
EXCITER
SCA1
DIGITAL
SCA2 POTS VCO
CONT V TO PS VSWR/
FWD/RFL/TEMP/ BIAS
CUR SAMPLES FOLDBACK/
RDS FINAL 1 PA FAULT RESET
SUMMING AMP MUTE STATUS
PS INHIBIT
WATCH DOG

EXC RF OUT
FINAL 2

PA RF IN IPA DRIVER
SPLITTER
COMBINER
FINAL 3
FWD/RFL RF OUTPUT
LOW-PASS FILTER PWR
COUPLER
PA
PWR SUP POWER FINAL 4
SUPPLIES
PA MODULE
+48V PS EXC/CONT PA +12V FAN
PWR SUP PWR SUP PWR SUP
+-12V/+5V +12V PS +12V PS
PS

STXLP – 1kW BLOCK DIAGRAM –

597-4102-2
AC INPUT FAN ASSEMBLY
 ETHERNET REMOTE
STATUS/CONTROL
SD

HEW LETT DLT

PAC KA RD SureStore
A utoloade718
r

ETHERNET
< TX OFF > RAM
FLASH
0W MEMORY HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD

FRONT PANEL SD

CONTROL TO
DISPLAY PCB
HEW LE TT D LT
PAC KAR D SureStore
Au tol oader718

SPI INTERFACE - PAs AND COMB/

PA2 – PA5 HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD

SPLITTER
FRONT PANEL LEDS COMB/SPLITTER
HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD
STATUS FROM
PAs AND COMB/
HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD
SPLITTER

FPGA CONTROLLER
ISOLATORS

REMOTE STATUS
D/A
PILOT OUT DAC CONVERTER
REMOTE LEVELS

AES STEREO REMOTE INPUTS

GENERATOR
A/D AND
ANALOG L AUDIO CONTROLLER PCB
SAMPLE RATE
GAIN
CONVERTER

ANALOG R
ANA TO DIG
DIGITAL POTS
POWER POWER CONVERTERS
SUPPLIES SUPPLIES

DSP/ DIGITAL
COMPOSITE CONTROLLER
EXCITER

SCA1
DIGTAL UP
AUDIO
SCA2 A/D’S CONVERTER/ DAC AMP
GAIN CONT V TO PS VSWR/
MODULATOR FWD/RFL/TEMP/ BIAS FOLDBACK/
RDS FINAL 1 CUR SAMPLES PA FAULT RESET
FPGA MUTE STATUS
PS INHIBIT
WATCH DOG

EXC RF OUT
FINAL 2

PA RF IN IPA DRIVER
SPLITTER
COMBINER
FINAL 3
FWD/RFL RF OUTPUT
LOW-PASS FILTER PWR
COUPLER
PA
PWR SUP POWER FINAL 4
SUPPLIES
PA MODULE
+48V PS EXC/CONT PA +12V FAN
PWR SUP PWR SUP PWR SUP
+-12V/+5V +12V PS +12V PS
PS

STXLP – 1kW BLOCK DIAGRAM –

597-4102-2A
AC INPUT FAN ASSEMBLY
 FRONT PANEL FRONT PANEL LEDS
DISPLAY PCB
CONTROL FROM
HEW LE TT
PAC KAR D
D LT
SureStore
Au tol oader718
SD
MAIN CONTROL
SPI INTERFACE UNIT
STATUS TO MAIN
CONTROL UNIT

CONTROL PCB

ANA TO DIG
DIGITAL POTS
POWER CONVERTERS
SUPPLIES

CONT V TO PS VSWR/
CONTROL FWD/RFL/TEMP/ BIAS FOLDBACK/
LOGIC FINAL 1 CUR SAMPLES PA FAULT RESET MUTE STATUS
PS INHIBIT
WATCH DOG

FINAL 2

PA RF IN IPA DRIVER
SPLITTER
COMBINER
FINAL 3
FWD/RFL RF OUTPUT
LOW-PASS FILTER PWR
COUPLER
PA
PWR SUP POWER FINAL 4
SUPPLIES
PA MODULE
+48V PS EXC/CONT PA +12V FAN
PWR SUP PWR SUP PWR SUP
+-12V/+5V +12V PS +12V PS
PS

STXLP – PA ONLY UNIT BLOCK DIAGRAM

597-4102-11
AC INPUT FAN ASSEMBLY
RF IN PA1
RF IN1

RF IN PA2
RF IN2

RF IN PA3 COMBINER RF OUTPUT

RF IN3

RF IN PA4
RF IN4 DIRECTIONAL
COUPLER/RF
SAMPLE
RF IN PA5
RF IN5

COMBINER BOARD

CONTROL FROM
HEW LE TT D LT
SureStore
SD
MAIN CONTROL
FILTER/
PAC KAR D Au tol oader718

UNIT
AMPLIFIER SPI INTERFACE
STATUS TO MAIN
CONTROL UNIT

RF DRIVE OUT 1

FILTER BOARD RF OUT1

RF LEVEL
DETECT RF DRIVE OUT 2
RF OUT2
EXCITER RF
DRIVER SPLITTER RF DRIVE OUT 3
OUTPUT
SPLITTER RF OUT3
RF IN
RF DRIVE OUT 4
RF OUT4

RF DRIVE OUT 5
POWER RF OUT5
SUPPLIES SPLITTER BOARD

+12V FAN
PWR SUP PWR SUP
+12V PS +12V PS

STXLP – COMBINER BLOCK DIAGRAM

597-4102-12
AC INPUT FAN ASSEMBLY
 CONTROLLER

OUT RF OUTPUT
PA IN COMBINER

POWER IN
SUPPLIES
PA ONLY 1kW UNIT – PA2

AC INPUT

CONTROLLER

CONTROLLER
POWER EXCITER RF
SUPPLIES OUT
EXCITER
AUDIO INPUT
OPTIONAL
STEREO
GENERATOR

PA

IN

STX-LP 1kW (MAIN CONTROL UNIT) – PA1

OUT SPLITTER
OUT

POWER SUPPIES

COMBINER

STXLP – 2kW BLOCK DIAGRAM –

597-4102-42
 CONTROLLER

PA

POWER
SUPPLIES
PA ONLY 1kW UNIT – PA3

CONTROLLER
IN

OUT RF OUTPUT
PA IN COMBINER

POWER IN
SUPPLIES
PA ONLY 1kW UNIT – PA2

AC INPUT

CONTROLLER

CONTROLLER
POWER EXCITER RF
SUPPLIES OUT
EXCITER
AUDIO INPUT
OPTIONAL
STEREO
GENERATOR

PA

IN

STX-LP 1kW (MAIN CONTROL UNIT) – PA1

OUT SPLITTER
OUT

OUT

POWER SUPPIES

COMBINER

STXLP – 3kW BLOCK DIAGRAM –

597-4102-13
 CONTROLLER

PA

POWER
SUPPLIES
PA ONLY 1kW UNIT – PA5

CONTROLLER

IN
PA
IN

POWER
SUPPLIES IN

PA ONLY 1kW UNIT – PA4

OUT RF OUTPUT
IN COMBINER

IN

CONTROLLER

PA

POWER
SUPPLIES
PA ONLY 1kW UNIT – PA3
CONTROLLER

AC INPUT
CONTROLLER

PA

POWER
SUPPLIES
IN
PA ONLY 1kW UNIT – PA2

OUT SPLITTER
CONTROLLER OUT

OUT

OUT
POWER EXCITER RF OUT
SUPPLIES OUT
EXCITER

AUDIO INPUT
OPTIONAL
STEREO
GENERATOR POWER SUPPIES

PA

COMBINER
STX-LP 1kW (MAIN CONTROL UNIT) – PA1 STXLP – 5kW BLOCK DIAGRAM –
597-4102-16
 J37 849-2040
PIN NAME
1 FAULT RESET
2 FAILSAFE CONTROLLER – 919-4030
3 TRANMITTER ON DISPLAY – 919-4070
J8 J2
4 TRANSMITTER OFF
5 MUTE
6 LOWER TRANSMITTER POWER J37
7 RAISE TRANSMITTER POWER
8 INT/EXT EXCITER CONTROL J12 – FLASH PROG J2/J8 J1
9 CONTROLLER RESET PIN DESCRIPTION PIN DESCRIPTION
PIN DESCRIPTION PIN DESCRIPTION 1 VSS
10 EXT EXCITER FAULT INPUT 1 DCLK
1 DB0 21 LED PS RED < TX OFF >
2 VDD
11 FM ONLY MODE INPUT SELECT 2 GND J1
2 DB1 22 LED ANT GRN 0W 3 VO
12 GROUND 3 CNFIG DONE
3 DB2 23 LED ANT RED 4 RS
13 FM+HD MODE INPUT SELECT J12 4 3.3V
4 DB3 24 LED FAILSF GRN 5 R/W J1/J13
14 HD ONLY MODE INPUT SELECT 5 NCONFIG
5 DB4 25 LED FAILSF RED 6 E PIN DESCRIPTION
15 REFLECTED POWER 6 NCE
6 DB5 26 GND 7 DB0 1 PA FWD PWR
16 PA1 THRU PA5 TOTAL CURRENT 7 DATA0
7 DB6 27 +5V 8 DB1 2 GND
17 PA1 THRU PA5 TEMPERATURE 8 NCS RF OUT
8 DB7 28 +5V 9 DB2 3 PA RFL PWR LOW-PASS FILTER ASSEMBLY– 919-4100
18 PA MODULE METER SELECT INPUT 9 ASDI
9 LCD_EN 29 BUTN LEFT 10 DB3 4 GND
19 GROUND 10 GND
10 LCD_WE 30 BUTN RIGHT 11 DB4 5 +5V DC J1
20 GENERAL FAULT STATUS 31 BUTN UP
11 LCD_D_CN 12 DB5 6 GND RF SAMPLE
21 VSWR STATUS J16 – UNIV JTAG 32 BUTN DOWN
J6 - JTAG 12 LED AUDIO GRN 13 DB6 7 GND
22 TRANSMITTER ON STATUS PIN DESCRIPTION 33 BUTN RETURN
PIN DESCRIPTION 13 LED AUDIO RED 14 DB7 8 GND
23 TRANSMITTER OFF STATUS 1 TDI 34 +3.3V
1 TCK 14 LED EXC GRN 15 A 9 GND
24 MUTE STATUS 2 TDO 35 N/C
849-2010
2 GND 15 LED EXC RED 16 K 10 GND
25 AFC LOCK STATUS 3 TCK 36 N/C
3 TDO 16 LED CNTL GRN
26 POWER SUPPLY FAULT STATUS J6 4 TMS 37 N/C
4 +2.5V J16 17 LED CNTL RED
27 INT/EXT EXCITER STATUS 5 TDI SOFT 38 N/C
5 TMS 18 LED PA GRN
28 PA FAULT 6 TCO SOFT 39 GND
6 VIO 19 LED PA RED J13
29 PA1 THRU PA5 FORWARD POWER 7 TCK SOFT 40 GND
FROM PA RF IN
7 N/C 20 LED PS GRN
30 PA1 THRU PA5 REFLECTED POWER 8 TMS SOFT 849-2026
8 N/C PA RF IN
31 NOT USED 9 GND
32 +5V OUT 9 TDI
10 GND 10 GND
33 FORWARD POWER
J7 J2
34 PA VOLTAGE H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

35 HD POWER CONTROL
36 RELAY CONTROL J1B-PA2 J1A-PA3 J14
37 GND H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

PIN DES J2/J7 REPLACEMENT PA – 979-4101

1 +12V DC PIN DESCRIPTION
J1, J2, J3A J2B-PA4 J2A-PA5 2 GND J14 1 PA FWD PWR
PIN DESCRIPTION SD SD

2 PA RFL PWR
H EWLE TT
P AC KA RD SureStoreDLT
A ut ol oa de7
r 18
H EWLE TT
P AC KA RD SureStoreDLT
A ut ol oa de7
r 18

1 SPI Data Out +

2 SPI Data Out - J10 3 FINAL CUR 1
J3B- ETH J3A- SPL/COM 4 FINAL CUR 2
3 SPI Data In +
4 SPI Data Clk + 5 FINAL CUR 3
5 SPI Data Clk - 6 FINAL CUR 4
J2/J10
6 SPI Data In - 849-2016 7 IPA CUR
PIN DESCRIPTION
7 CS0 8 DRIVER CUR J4
1 EXC UART RX/TX
9 RF DET PIN DES
8 CS1 2 EXC UART TX/RX
10 PA 48V 1 +12V DC
9 MOSI LED 3 MOD A2D
10 GND 11 PA TEMP 2 +12V DC
4 GND
11 MISO LED 12 PA VSWR FOLDBK 3 +12V DC
5 INT OUT
12 MISO 13 PA OVERCUR 4 GND
6 INT IN J1
14 LV V+ 5 GND
7 MUTE PIN DES
15 PS FAULT 6 GND
8 FAILSAFE 1 +48V DC
16 48V CONT 7 PS FAULT
9 TX ON 2 +48V DC
17 PA BIAS 8 +48V CONT
10 TX OFF 3 +48V DC
18 PS INHIBIT
11 PLL LOCK
19 +5V PA SOURCE J4 9 PS INHIBIT
4 GND
12 FAULT OUT 5 GND
20 PA MUTE STATUS
13 LED FAULT OUT 6 GND
21 FAULT RESET
14 A GND
15 GND
22 VSWR SHUTDN J1 7 GND
23 GND 8 GND
16 GND
24 GND
25 GND
J7 26 GND
PIN DES MAIN HARNESS 949-4101
J14 - AES J2
J14/J15/J16 J1/J10 1 +12V DC J7
PIN DES PIN DES PIN DES 2 GND
1 GND J15 - LEFT 1 RX+ 9 GND 3 +5V DC
2 + 2 RX- 10 +12V DC 4 -12V DC
3 - 3 L+ 11 GND
J16 - RIGHT 4 L- 12 +3.3V DC
5 R+ 13 GND
6 R- 14 1.8V DC
J12A – PILOT OUT 7 GND 15 GND
CABLE 949-0543 8 +5V DC 16 GND J2/J11
PIN DES PIN DES
1 SGPCS 9 CSDO
TO PA RF IN J12B – RF OUT 10 CSCK
J1 J10 2 D2ACS
3 A2DCS 11 COFS
4 SGPCS 12 PILOT 959-4101-380
OPTIONAL STEREO +48V POWER SUPPLY
5 SCK 13 SG OUT
GENERATOR – 6 SDI 14 SGCLK EN
J1A – COMP J11
919-4020 7 SDO 15 GND 220V – 540-0016-002
8 CSDI 16 GND
J2 J2
J2 J2 PIN NAME COLOR
540-1205 540-1012-100 J2 1 DC + RED
J1B – SCA1 J2 540-1012-100
J2 2 DC + RED
PIN DES PIN DES 3 GND BLK
1 N/C 1 +12V DC 4 GND BLK
2 +5V DC 2 +12V DC 5 N/C
3 GND 3 GND 6 N/C
J3A – SCA2 J5 J2 4 GND 4 GND
PIN DES PIN DES 5 -12V DC 5 N/C
1 + SENSE 1 LOGIC RETURN 6 +12V DC
2 N/C 6 N/C
2 + OUTPUT
3 PS FAULT +-12V/+5V PWR +12V POWER +12V POWER
3 + OUTPUT
J3B – RDS 4 - SENSE 4 N/C SUPPLY – CONT/ SUPPLY – PA SUPPLY – FAN
EXCITER – 919-4000 5 - OUTPUT 5 VOLT CONT EXC J1 J1 J1
6 - OUTPUT 6 INHIBIT
J1 J1 J1
PS MOTHERBD 919-4090
PIN NAME PIN NAME PIN NAME
J3 J4 1 LINE
J5 J2 1 LINE 1 LINE
PIN DES PIN DES J3 J4 2 N/C 2 N/C 2 N/C
1 AC(N) 1 AC(N) 3 NEU/LINE 3 NEU/LINE 3 NEU/LINE
2 AC(L) 2 AC(L)
AC INPUT 3 GND
4 GND

CABLE 949-4101-100

STXLP - 1kW INTERCONNECT

CABLE 949-4101-200 DIAGRAM – 597-4102-1
9-19-2012
 J37 849-2040
PIN NAME
1 FAULT RESET
2 FAILSAFE CONTROLLER – 919-4030
3 TRANMITTER ON DISPLAY – 919-4070
J8 J2
4 TRANSMITTER OFF
5 MUTE
6 LOWER TRANSMITTER POWER J37
7 RAISE TRANSMITTER POWER
8 INT/EXT EXCITER CONTROL J12 – FLASH PROG J2/J8 J1
9 CONTROLLER RESET PIN DESCRIPTION PIN DESCRIPTION
PIN DESCRIPTION PIN DESCRIPTION 1 VSS
10 EXT EXCITER FAULT INPUT 1 DCLK
1 DB0 21 LED PS RED < TX OFF > 2 VDD
11 FM ONLY MODE INPUT SELECT 2 GND J1
2 DB1 22 LED ANT GRN 0W 3 VO
12 GROUND 3 CNFIG DONE
3 DB2 23 LED ANT RED 4 RS
13 FM+HD MODE INPUT SELECT J12 4 3.3V
4 DB3 24 LED FAILSF GRN 5 R/W J1/J13
14 HD ONLY MODE INPUT SELECT 5 NCONFIG
5 DB4 25 LED FAILSF RED 6 E PIN DESCRIPTION
15 REFLECTED POWER 6 NCE
6 DB5 26 GND 7 DB0 1 PA FWD PWR
16 PA1 THRU PA5 TOTAL CURRENT 7 DATA0
7 DB6 27 +5V 8 DB1 2 GND
17 PA1 THRU PA5 TEMPERATURE 8 NCS RF OUT
8 DB7 28 +5V 9 DB2 3 PA RFL PWR LOW-PASS FILTER ASSEMBLY– 919-4100
18 PA MODULE METER SELECT INPUT 9 ASDI
9 LCD_EN 29 BUTN LEFT 10 DB3 4 GND
19 GROUND 10 GND
10 LCD_WE 30 BUTN RIGHT 11 DB4 5 +5V DC J1
20 GENERAL FAULT STATUS 31 BUTN UP
11 LCD_D_CN 12 DB5 6 GND RF SAMPLE
21 VSWR STATUS J16 – UNIV JTAG 32 BUTN DOWN
J6 - JTAG 12 LED AUDIO GRN 13 DB6 7 GND
22 TRANSMITTER ON STATUS PIN DESCRIPTION 33 BUTN RETURN
PIN DESCRIPTION 13 LED AUDIO RED 14 DB7 8 GND
23 TRANSMITTER OFF STATUS 1 TDI 34 +3.3V
1 TCK 14 LED EXC GRN 15 A 9 GND
24 MUTE STATUS 2 TDO 35 N/C
849-2010
2 GND 15 LED EXC RED 16 K 10 GND
25 AFC LOCK STATUS 3 TCK 36 N/C
3 TDO 16 LED CNTL GRN
26 POWER SUPPLY FAULT STATUS J6 4 TMS 37 N/C
4 +2.5V J16 17 LED CNTL RED
27 INT/EXT EXCITER STATUS 5 TDI SOFT 38 N/C
5 TMS 18 LED PA GRN
28 PA FAULT 6 TCO SOFT 39 GND
6 VIO 19 LED PA RED J13
29 PA1 THRU PA5 FORWARD POWER 7 TCK SOFT 40 GND
FROM PA RF IN
7 N/C 20 LED PS GRN
30 PA1 THRU PA5 REFLECTED POWER 8 TMS SOFT 849-2026
8 N/C PA RF IN
31 NOT USED 9 GND
32 +5V OUT 9 TDI
10 GND 10 GND
33 FORWARD POWER
J7 J2
34 PA VOLTAGE H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

35 HD POWER CONTROL
36 RELAY CONTROL J1B-PA2 J1A-PA3 J14
37 GND H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
SD

PIN DES J2/J7 REPLACEMENT PA – 979-4101

1 +12V DC PIN DESCRIPTION
J1, J2, J3A J2B-PA4 J2A-PA5 2 GND
PIN DESCRIPTION SD SD
J14 1 PA FWD PWR
2 PA RFL PWR
H EWLE TT
P AC KA RD Su reStoreDLT
A ut ol oa de7
r 18
H EWL ETT
P AC KA RD SureStor e
DL T
l ad er718
Au to o

1 SPI Data Out +

J10 3 FINAL CUR 1
2 SPI Data Out - J3B- ETH J3A- SPL/COM 4 FINAL CUR 2
3 SPI Data In +
4 SPI Data Clk + 5 FINAL CUR 3
5 SPI Data Clk - 6 FINAL CUR 4
J2/J10
6 SPI Data In - 849-2016 7 IPA CUR
PIN DESCRIPTION
7 CS0 8 DRIVER CUR J4
1 EXC UART RX/TX
8 CS1 9 RF DET PIN DES
2 EXC UART TX/RX
9 MOSI LED 10 PA 48V 1 +12V DC
3 MOD A2D
10 GND 11 PA TEMP 2 +12V DC
4 GND
12 PA VSWR FOLDBK 3 +12V DC
11 MISO LED 5 INT OUT
13 PA OVERCUR 4 GND
12 MISO 6 INT IN
14 LV V+ J1
7 MUTE 5 GND
15 PS FAULT PIN DES
8 FAILSAFE 6 GND
16 48V CONT 1 +48V DC
9 TX ON 7 PS FAULT
17 PA BIAS 2 +48V DC
10 TX OFF 8 +48V CONT
18 PS INHIBIT 3 +48V DC
11 PLL LOCK
19 +5V PA SOURCE J4 9 PS INHIBIT
4 GND
12 FAULT OUT 5 GND
20 PA MUTE STATUS
13 LED FAULT OUT 6 GND
21 FAULT RESET
14 A GND
15 GND
22 VSWR SHUTDN J1 7 GND
23 GND 8 GND
16 GND
24 GND
25 GND
J7 26 GND
PIN DES MAIN HARNESS 949-4101
J14 - AES J2
J14/J15/J16 J1/J10 1 +12V DC J7
PIN DES PIN DES PIN DES 2 GND
1 GND J15 - LEFT 1 RX+ 9 GND 3 +5V DC
2 + 2 RX- 10 +12V DC 4 -12V DC
3 - 3 L+ 11 GND
J16 - RIGHT 4 L- 12 +3.3V DC
5 R+ 13 GND
6 R- 14 1.8V DC
J12A – PILOT OUT 7 GND 15 GND
CABLE 949-0543 8 +5V DC 16 GND J2/J11
PIN DES PIN DES
1 SGPCS 9 CSDO
TO PA RF IN J12B – RF OUT 10 CSCK
J1 J10 2 D2ACS
3 A2DCS 11 COFS
4 SGPCS 12 PILOT 959-4101-380
OPTIONAL STEREO +48V POWER SUPPLY
5 SCK 13 SG OUT
GENERATOR – 6 SDI 14 SGCLK EN
J1A – COMP J11
919-4020 7 SDO 15 GND 220V – 540-0016-002
8 CSDI 16 GND
J2 J2
J2 J2 PIN NAME COLOR
540-1205 540-1012-100 J2 1 DC + RED
J1B – SCA1 J2 540-1012-100
J2 2 DC + RED
PIN DES PIN DES 3 GND BLK
1 N/C 1 +12V DC 4 GND BLK
2 +5V DC 2 +12V DC 5 N/C
3 GND 3 GND 6 N/C
J3A – SCA2 J5 J2 4 GND
PIN DES 4 GND
PIN DES 5 -12V DC 5 N/C
1 + SENSE 1 LOGIC RETURN 6 +12V DC 6 N/C
2 + OUTPUT 2 N/C
3 PS FAULT +-12V/+5V PWR +12V POWER +12V POWER
3 + OUTPUT
J3B – RDS 4 - SENSE 4 N/C SUPPLY – CONT/ SUPPLY – PA SUPPLY – FAN
DIGITAL EXCITER – 919-4000-100 5 - OUTPUT 5 VOLT CONT EXC J1 J1 J1
6 - OUTPUT 6 INHIBIT
J1 J1 J1
PS MOTHERBD 919-4090
PIN NAME PIN NAME PIN NAME
J3 J4 1 LINE
J5 J2 1 LINE 1 LINE
PIN DES PIN DES J3 J4 2 N/C 2 N/C 2 N/C
1 AC(N) 1 AC(N) 3 NEU/LINE 3 NEU/LINE 3 NEU/LINE
2 AC(L) 2 AC(L)
AC INPUT 3 GND
4 GND

CABLE 949-4101-100

STXLP - 1kW INTERCONNECT

CABLE 949-4101-200 DIAGRAM – 597-4102-1
9-19-2012
 J1/J12 J1/J13
PIN DESCRIPTION PIN DESCRIPTION
1 +12V DC 1 PA FWD PWR
2 GND 2 GND
3 N/C 3 PA RFL PWR
4 RF IN FAULT 4 GND
5 COMB TEMP FLT 5 +5V DC
6 COMB VSWR FLT 6 GND
7 SPLITTER RF IN FLT 7 GND
8 N/C 8 GND
9 TEMP SAMPLE 9 GND
10 TEMP SAMPLE X5 10 GND

CONTROLLER – 919-4035 DISPLAY – 919-4075 RF OUT

LOW-PASS FILTER ASSEMBLY– 919-4100

J1 J1
RF SAMPLE

849-2010-100 849-2010

J12 J13
FROM PA RF IN
849-2026 PA RF IN

J2 J2

J2/J7
PIN DESCRIPTION
SD
1 PA FWD PWR
2 PA RFL PWR
H EWL ETT
P AC KA RD SureStor DL
eu toTol ad er718
A

3 FINAL CUR 1
J1- SPL/COM 4 FINAL CUR 2
5 FINAL CUR 3
6 FINAL CUR 4 PA – 919-4050
7 IPA CUR
8 DRIVER CUR J4
9 RF DET PIN DES
10 PA 48V 1 +12V DC
11 PA TEMP 2 +12V DC
12 PA VSWR FOLDBK 3 GND
13 PA OVERCUR 4 GND
14 LV V+ 5 GND
15 PS FAULT 6 PS FAULT J1
16 48V CONT 7 +48V CONT PIN DES
17 PA BIAS 8 PS INHIBIT 1 +48V DC
18 PS INHIBIT 2 +48V DC
19 +5V PA SOURCE J4 3 +48V DC
20 PA MUTE STATUS 4 GND
21 FAULT RESET 5 GND
22 VSWR SHUTDN J1 6 GND
23 GND
24 GND
25 GND
26 GND
MAIN HARNESS 949-4101-406

P5 J5

949-4101-401
959-4102-380
+48V POWER SUPPLY

220V – 540-0016-007

J5 J2
J2 PIN NAME COLOR
PIN DES PIN DES 540-1012-501 J2 1 DC + RED
1 + 12VDC 6 FAN 1
J2 540-1012-100 2 DC + RED
2 + 12VF 7 F GND
3 + 12VF 8 F GND PIN DES 3 GND BLK
4 + 12VF 9 FAN 2 1 +12V DC 4 GND BLK
5 + 12VF 2 +12V DC 5 N/C
J2 3 GND 6 N/C
J5
PIN DES 4 GND
PIN DES
5 N/C
1 + SENSE 1 LOGIC RETURN
6 N/C
2 + OUTPUT 2 N/C
3 + OUTPUT 3 PS FAULT +12V POWER +12V POWER
4 - SENSE 4 N/C SUPPLY – PA SUPPLY – FAN
5 - OUTPUT 5 VOLT CONT J1 J1
6 - OUTPUT 6 INHIBIT

PS MOTHERBD 919-4090-200 J1 J1
PIN NAME PIN NAME
J3 J4
J5 J2 J6 1 LINE 1 LINE
PIN DES PIN DES J3 J4
2 N/C 2 N/C
1 AC(N) 1 AC(N)
3 NEU/LINE 3 NEU/LINE
2 AC(L) 2 AC(L)
AC INPUT 3 GND
4 GND

CABLE 949-4101-100

CABLE 949-4101-200 STXLP – PA ONLY UNIT INTERCONNECT

949-4101-403
DIAGRAM – 597-4102-9
 SD

H EWL ETT
P AC KA RD SureStor DL
eu toTol ad er718
A

J1- SPL/COM
FROM PA1 EXC OUT
SPLITTER IN

TO PA1 RF IN

2 kW SPLITTER ASSEMBLY – 959-4005-102 SPLITTER OUT 1

3 kW SPLITTER ASSEMBLY – 959-4005-103 TO PA2 RF IN
5 kW SPLITTER ASSEMBLY – 959-4005-105
SPLITTER OUT 2
TO PA3 RF IN
SPLITTER OUT 3

TO PA4 RF IN
SPLITTER OUT 4*

TO PA5 RF IN
SPLITTER OUT 5*

TO ANTENNA
RF OUT

FROM PA1 RF OUT

COMB IN 1

2 kW COMBINER BOARD – 919-4045 FROM PA2 RF OUT

3 kW COMBINER BOARD – 919-4065-001 COMB IN 2
5 kW COMBINER BOARD – 919-4085-001 2 kW RF INPUT – 959-4015-002
3 kW RF INPUT – 959-4015-003 FROM PA3 RF OUT
5 kW RF INPUT – 959-4015-005 COMB IN 3

FROM PA4 RF OUT

J3 FWD PWR J2 RFL PWR
COMB IN 4*

FROM PA5 RF OUT

COMB IN 5*
CABLE 949-4116 CABLE 949-4115

J4
PIN NAME COLOR
1 DC + RED
2 DC + ORG
CABLE 849-2010-100 3 GND BLK
J3 FWD PWR J5 RFL PWR
4 GND GRAY
DISPLAY – 919-4075 FILTER BOARD 919-4095-001
5 FAN SPEED BROWN
J1

J7
6 FAN SPEED WHITE
J6 J2 J4 7 N/C YEL
J1/J7 J8 8 N/C PUR
PIN NAME 9 N/C N/C
1 +12V DC J6 10 N/C N/C
2 GND J8
PIN DES
3 N/C PIN DES
1 +15V DC
4 N/C 1 +12V DC
2 GND J2
5 COMB OTEMP IND 2 GND
3 TEMP V PIN DES MAIN HARNESS 949-4114-001
6 VSWR FAULT 4 GND 1 +12V DC
7 SPLITTER RF PRESENT 2 +12V DC
8 N/C TEMP SENSE 3 GND
9 AIR INLET TEMP FROM BACKER 4 GND
10 AIR INLET TEMP

380-9006

J2
J2 PIN NAME COLOR
540-1012-100 J2 1 DC + RED
J2 540-1012-200 2 DC + RED
PIN DES 3 GND BLK
1 +12V DC 4 GND BLK
2 +12V DC 5 N/C
3 GND 6 N/C
4 GND
5 N/C
6 N/C
+12V POWER +12V POWER
NOTES –
SUPPLY SUPPLY – FAN * 5 kW Model Only
J1 J1

J1 J1
PIN NAME PIN NAME
1 LINE 1 LINE
2 N/C 2 N/C
3 NEU/LINE 3 NEU/LINE
AC INPUT
STXLP – COMBINER UNIT
INTERCONNECT DIAGRAM – 597-4102-10
CABLE 949-4101-100

CABLE 949-4101-200
 < TX OFF > TX OFF 0W
MAIN MENU RETURNS TO TX OFF
FWD=1000 RFL= 10 ON OFF

MAIN MENU BACK TO MAIN MENU

<PWR SET =1000W> POWER FM PWR ->0250W

FWD=1000 RFL= 10 FM PWR ACTIVE 250W ^

POWER FM+HD PWR->0250W

FM+HD PWR 250W ^ RETURNS TO POWER

POWER HD PWR ->0250W

HD PWR 250W ^
MAIN MENU BACK TO POWER MOVE ^ SET DIGIT
PRESENTS ACTIVE WHEN SELECTED

< FREQUENCY > FREQ-> 98.10MHz

98.10 MHz ^ RETURNS TO FREQUENCY

MOVE ^ SET DIGIT

< AUDIO INPUT > AUD IN-> COMP

COMPOSITE ^
AUD IN-> ANA L/R RETURNS TO AUDIO INPUT
^
*
AUD IN-> AES
^
*
SET OPTION
MAIN MENU BACK TO INPUT

<COMP IN 100%> COMP IN-> 120%

------ 120% RETURNS TO COMP IN ***
***
ANALOG IN-> 120%
120% RETURNS TO ANALOG IN ***
***
AES IN-> 120%
120% RETURNS TO AES IN ***
***
MOVE ^ SET DIGIT
<SCA/RDS LEVEL> SCA/RDS LEV SCA1 LVL-> 10%
SCA1 10% UP DOWN
SCA/RDS LEV RDS LVL-> 10% RETURNS TO SCA/RDS LEVEL
RDS 10% UP DOWN
SCA/RDS LEV SCA2 LVL-> 10%
SCA2 10% UP DOWN
MAIN MENU BACK TO SCA/RDS LEVEL MOVE ^ SET DIGIT

CONTROLLER PA
< METERING > METERING CONTROLLER PA 1 COMBINER
CONTROLLER EXCMOD = FWD PWR = RF-IN =
METERING CONTROLLER PA 1 COMBINER
PA 1 1.2V PS = RFL PWR = FWD-PWR =
METERING CONTROLLER PA 1 COMBINER
PA 2 ** 3.3V PS = FINAL CUR1 = REF-PWR =

METERING CONTROLLER PA 1 COMBINER

PA 3 ** 5V PS = FINAL CUR2 = +11V =
CONTROLLER PA 1 COMBINER
METERING
** 3.3V PA PS = FINAL CUR3 = +5V =
PA 4
PA 1 RETURNS TO COMBINER RETURNS TO
CONTROLLER
METERING FINAL CUR4 = METERING +3.3V = METERING
** 2.5V PLL =
PA 5
CONTROLLER PA 1 COMBINER
METERING 1.2V PLL = IPA CURR = Brd Rev =
COMBINER ** CONTROLLER PA 1 COMBINER
Pa1BiasV = RETURNS TO DRVR CURR = Config =
METERING PA 1 COMBINER
CONTROLLER
MAIN MENU BACK TO METERING PA RF-IN = Comb Temp =
LV V =
PA 1 COMBINER
CONTROLLER
PA CTRL = Inlet Temp =
5V Fused =
PA 1 COMBINER
PA TEMP = Fan V =

MAIN MENU BACK TO METERING

MAIN MENU BACK TO METERING

CONTROLLER PA
PA 1 FAULT RESET RETURNS TO
< DIAGNOSTICS > DIAGNOSTICS CONTROLLER
CUR FLDBCK-> YES NO DIAGNOSTICS
CONTROLLER FAILSAFE->
CONTROLLER PA 1
DIAGNOSTICS
PLL-> VSWR SHTDWN->
PA 1
CONTROLLER PA 1
DIAGNOSTICS RF INPUT->
PA 2 ** VSWR SHTDWN->
RETURNS TO PA 1
DIAGNOSTICS CONTROLLER DAIGNOSTICS
** PWR SUPPLY-> RETURNS TO
PA 3 PA FAULT->
DIAGNOSTICS
CONTROLLER PA 1
DIAGNOSTICS VSWR FOLDBACK COMBINER
PA 4 ** ACTIV EXCTR->
RF-IN FLT->
CONTROLLER PA 1
DIAGNOSTICS TEMP FLDBCK-> COMBINER
PA 5 ** EXTEXC STAT->
INPT OVRDRV->
CONTROLLER PA 1
DIAGNOSTICS TEMP SHTDWN-> COMBINER RETURNS TO
EXTEXC MODE->
FAULT RESET OVERTEMP-> DIAGNOSTICS
CONTROLLER MAIN MENU BACK TO DIAGNOSTICS
DIAGNOSTICS ** AUDMOD STAT-> COMBINER
PRESENTS OK WHEN NORMAL OR VSWR FLT->
COMBINER
CONTROLLER FLT WHEN FAULTED
DIAGNOSTICS EXC COMMS-> COMBINER
VERSIONS/JUMPERS SPLTR MUTED->
PRESENTS OK WHEN NORMAL
OR FLT WHEN FAULTED
MAIN MENU BACK TO DIAGNOSTICS MAIN MENU BACK TO DIAGNOSTICS
SHT 1 OF 2

100% MOD=
75kHz

NOTES - TX S/N RETURNS TO

* DISPLAYED IF STEREO GENERATOR BOARD IS PRESENT 1000000-000 DIAGNOSTICS
** DISPLAYED IF 3 kW OR 5 kW MODELS CONT BD S/N
*** DISPLAY CHANGES IN RESPONSE TO SELECTED INPUT 100000000000000
SOFT VER
V2.0 01/10/10
STXLP MENU TREE – 597-4102-3

MAIN MENU BACK TO DIAGNOSTICS

< PREEMPHASIS > PREEMPH-> NONE
NONE ^
PREEMPH-> 50uSEC
^ RETURNS TO PREEMPHASIS

PREEMPH-> 75uSEC
^
SHOWS N/A WITH NO STEREO BOARD
SET OPTION

< PILOT >

PILOT PILOT-> 10.0%
LEVEL = 10.0% ^
RETURNS TO PILOT
PILOT PILOT-> ON
ON/OFF = ON ON OFF
SHOWS N/A WITH NO STEREO BOARD
MOVE ^ SET DIGIT

< MONO/ST MODE > MODE-> STEREO

STEREO ^
MODE-> MONO L+R
^
RETURNS TO MONO/ST MODE
MODE-> MONO R
^
MONO R MODE->
^
SHOWS N/A WITH NO STEREO BOARD
SET OPTION
MAIN MENU
BACK TO MONO/ST MODE TXTYPE INT/EXT EXC EMERGENCY PWR
EXTEXC->FM MODE RETURNS
< SETUP > SETUP TXTYPE-> 1 kW EXC-> INTERNAL EMG PWR-> 1000W RMT-> ENABLE RETURNS ^ TO SETUP
TXTYPE ^ ^ ^ ^ TO SETUP
EXTEXC->HYB MODE
SETUP TXTYPE-> 3 kW EXC-> EXTERNAL MOVE ^ SET DIGIT RMT-> DISABLE ^
INT/EXT EXC ^ ^ ^
EXTEXC->HD MODE
SETUP TXTYPE-> 5 kW SET OPTION SET OPTION ^
EXT EXC MODE SEL ^ MAIN MENU BACK TO SETUP MAIN MENU BACK TO SETUP
SETUP MOVE ^ SET DIGIT
EMERGENCY PWR

SETUP
RMT EN/DIS

MAIN MENU BACK TO SETUP

< ETHERNET/IP > ETHERNET/IP IP ADDRESS 010.002.001.100

IP ADDRESS 10.2.1.100 ^
ETHERNET/IP SUBNET MASK 255.255.000.000
SUBNET ADDRESS 255.255.0.0 RETURNS TO ETHERNET/IP
^
ETHERNET/IP IP ADDRESS 010.002.001.001
GATEWAY ADDRESS 10.2.1.1 ^
ETHERNET/IP MAC ADDRESS MOVE ^ SET DIGIT
MAC ADDRESS AABBCCDDEEFF
MAIN MENU MAIN MENU
BACK TO ETHERNET/IP BACK TO ETHERNET/IP

< 03/02/2009 > SET CLOCK T->07:48:24 AM

07:48:12PM TIME ^
RETURNS TO SET CLOCK
SET CLOCK DATE->03/02/2009
DATE ^
MAIN MENU MOVE ^ SET DIGIT
BACK TO SET CLOCK

< PASSWORD > SET PASSWORD CHIEF-> 123456

OPERATOR CHIEF ^
SET PASSWORD OPER-> 111111
OPERATOR RETURNS TO PASSWORD
^
SET PASSWORD RGUI-> 222222
RGUI ^
MAIN MENU MOVE ^ SET DIGIT
BACK TO PASSWORD

< AUD/MOD CAL > EXT COMP CAL EXT COMP-> 100%
CAL’D AT 100% 255 DEV=075 ^
AES COMP CAL AES COMP-> 100%
CAL’D AT 100% 255 DEV=075 ^ *
L/R INPUT CAL L/R IN-> 255
-100.0 RAISE -100.0 RAISE * LOWER LEVEL, LEVEL OK
< TX OFF >
L/R COMP CAL L/R COMP-> 100%
FWD=1000 RFL= 10
CAL’D AT 100% 255 DEV=075 ^
SCA1 CAL SCA1 CAL-> 10% RETURNS TO SCA/RDS CAL
CAL’D AT 10% 255 DEV=7.5 ^
SCA2 CAL SCA2 CAL-> 10%
CAL’D AT 10% 255 DEV=7.5 ^
RDS CAL RDS CAL-> 10%
CAL’D AT 10% 255 DEV=7.5 ^
DEVIATION CAL DEV CAL->
UP DWN
MAIN MENU MOVE ^ SET DIGIT
BACK TO SCA/RDS CAL

NOTES -
* DISPLAYED IF STEREO GENERATOR BOARD IS PRESENT
** DISPLAYED IF 3 kW OR 5 kW MODELS
*** DISPLAY CHANGES IN RESPONSE TO SELECTED INPUT
SHT 2 OF 2
STXLP MENU TREE – 597-4102-3