Technical Services: Tel: (800) 381-9312 / Fax: (800) 791-5500

BlazeMaster ®
CPVC Fire Sprinkler Pipe & Fittings
Submittal Sheet
General Technical
Description Data
Tyco Fire & Building Products (TFBP) Sizes
BlazeMaster CPVC Pipe and Fittings 3/4" to 3"
are designed exclusively for use in wet
Maximum Working Pressure
pipe automatic fire sprinkler systems.
175 psi
They are made from a specially devel-
oped thermoplastic compound com- Approvals
posed of post chlorinated polyvinyl UL, FM, CUL, NSF, Dade County,
chloride (CPVC) resin and state of the LPCB, MEA, and the City of Los Ange-
art additives. TFBP BlazeMaster les. (Refer to IH-1900, Rev. 0, Janu-
CPVC products are easier to install ary 2005 “Installation Instruction &
than traditional steel pipe systems, Technical Handbook” for exact list-
and at the same time, provide superior ing/approval information.)
heat resistance and strength as com-
Manufacture Source
pared to traditional CPVC and PVC
U.S.A.
piping materials used in the plumbing
trade. Various adapters are available Material
to connect CPVC pipe to metallic pip-
ing. All female pipe thread adapters • Pipe: ASTM F442, SDR 13.5
have brass inserts for durability. • Fittings: ASTM F438 (Sch. 40) and
Grooved adapters connect directly to ASTM F439 (Sch. 80), ASTM F1970
grooved end valves and metallic pipe,
with flexible grooved end couplings. Color
Orange
WARNING
Tyco Fire & Building Products (TFBP)
BlazeMaster CPVC Pipe and Fittings
described herein must be installed and
maintained in compliance with this
document, as well as with the applica-
ble standards of the National Fire Pro-
tection Association, in addition to the
standards of any other authorities hav-
ing jurisdiction. Failure to do so may
impair the performance of these de-
vices.
The owner is responsible for maintain-
ing their fire protection system and de-
vices in proper operating condition.
The installing contractor or sprinkler
manufacturer should be contacted
with any questions.

BlazeMaster® is a registered trademark

of Noveon IP Holding Corp.

Page 1 of 6 JANUARY, 2006 TFP1915

Page 2 of 6 TFP1915

WATER
NOMINAL AVERAGE AVERAGE WEIGHT FILLED WEIGHT FT. OF PIPE WEIGHT PER LIFT
SIZE O.D. I.D. lbs./ft. PER LIFT lbs.
lbs./ft.

3/4" 1.050" 0.874" 0.18 0.44 7875 1339

1" 1.315" 1.101' 0.26 0.67 5040 1320
1-1/4" 1.660" 1.394" 0.42 1.08 2835 1191
1-1/2" 1.900" 1.598" 0.54 1.41 2205 1213
2" 2.375" 2.003" 0.84 2.20 1260 1084
2-1/2" 2.875" 2.423" 1.26 3.26 1215 1531
3" 3.500" 2.952" 1.87 4.83 720 1344

FIGURE 1 — PIPE DIMENSIONS

Installation Care and

Tyco Fire and Building Products
(TFBP) BlazeMaster CPVC Pipe and
Maintenance
Fittings are to be installed in accord- The owner is responsible for the in-
ance with IH-1900, Rev. 0, January spection, testing, and maintenance of
2005 “Installation Instruction & Techni- their fire protection system and de-
cal Handbook”. vices in compliance with this docu-
ment, as well as with the applicable
standards of the National Fire Protec-
tion Association (e.g., NFPA 25), in
addition to the standards of any
authority having jurisdiction. The in-
stalling contractor or product manufac-
turer should be contacted relative to
any questions.
It is recommended that automatic
sprinkler systems be inspected,
tested, and maintained by a qualified
Inspection Service in accordance with
local requirements and/or national
codes.

NOTES
Before closing a fire protection system
control valve for inspection or mainte-
nance work on the fire protection sys-
tem that it controls, permission to shut
down the affected fire protection sys-
tem must first be obtained from the
proper authorities and all personnel
who may be affected by this action
must be notified.
After placing a fire protection system
in service, notify the proper authorities
and advise those responsible for moni-
toring proprietary and/or central sta-
tion alarms.
TFP1915 Page 3 of 6

FITTING PART NOMINAL TAKE-OUT WEIGHT

NOMINAL SIZE SCHD.
TYPE NUMBER (T/O) (lb.)

TEE 80000 3/4" 5/8" 40 0.11

T/O 80001 1" 11/16" 40 0.19
80002 1-1/4" 7/8" 40 0.26
80003 1-1/2" 1-1/16" 80 0.51
80004 2" 1-3/8" 80 0.90
80005 2-1/2" 1-9/16" 80 1.59
T/O T/O 80006 3" 1-13/16" 80 2.41

XxYxZ X Y Z

80132 3/4" x 3/4" x 1" 3/4" 3/4" 5/8" 40 0.14

80133 1" x 3/4" x 3/4" 9/16" 9/16" 3/4" 40 0.14
80134 1" x 3/4" x 1" 3/4" 11/16" 3/4" 40 0.17
80260 1" x 1" x 3/4" 5/8" 5/8" 13/16" 40 0.16
80135 1-1/4" x 1" x 3/4" 5/8" 5/8" 15/16" 40 0.21
80136 1-1/4" x 1" x 1" 3/4" 3/4" 15/16" 40 0.22
80137 1-1/4" x 1" x 1-1/4" 15/16" 15/16" 7/8" 40 0.26
REDUCING TEE 80261 1-1/4" x 1-1/4" x 3/4" 5/8" 5/8" 7/8" 40 0.23
80262 1-1/4" x 1-1/4" x 1" 3/4" 3/4" 7/8" 40 0.26
Z 1" 1" 1" 80 0.43
80138 1-1/4" x 1-1/4" x 1-1/2"
T/O
80140 1-1/2" x 1-1/4" x 3/4" 9/16" 9/16" 1" 80 0.36
80141 1-1/2" x 1-1/4" x 1" 9/16" 9/16" 1-1/16" 80 0.38
80263 1-1/2" x 1-1/2" x 3/4" 9/16" 9/16" 1" 80 0.36
X Y 80264 1-1/2" x 1-1/2" x 1" 9/16" 9/16" 1-1/16" 80 0.38
80275 1-1/2" x 1-1/2" x 1-1/4" 7/8" 7/8" 1" 80 0.45
T/O T/O 80265 2" x 2" x 3/4" 3/4" 3/4" 1-3/8" 80 0.61
80266 2" x 2" x 1" 7/8" 7/8" 1-3/8" 80 0.66
80274 2" x 2" x 1-1/4" 1-1/16" 1-1/16" 1-3/8" 80 0.74
80267 2" x 2" x 1-1/2" 1-1/8" 1-1/8" 1-3/8" 80 0.78
80271 2-1/2" x 2-1/2" x 1" 1-9/16" 1-9/16" 1-9/16" 80 1.43
80272 2-1/2" x 2-1/2" x 1-1/4" 1-9/16" 1-9/16" 1-9/16" 80 1.46
80273 2-1/2" x 2-1/2" x 1-1/2" 1-9/16" 1-9/16" 1-9/16" 80 1.48
80276 2-1/2" x 2-1/2" x 2" 1-9/16" 1-9/16" 1-9/16" 80 1.50
80270 3" x 3" x 1-1/2" 1-13/16" 1-13/16" 1-13/16" 80 2.28
80268 3" x 3" x 2" 1-13/16" 1-13/16" 1-3/4" 80 2.25
80269 3" x 3" x 2-1/2" 1-13/16" 1-13/16" 1-13/16" 80 2.44

CROSS & REDUCING CROSS 80009 3/4" 9/16" 40 0.13

80010 1" 11/16" 40 0.23
T/O
80011 1-1/4" 15/16" 40 0.34
80012 1-1/2" 1-1/16" 80 0.67
80013 2" 1-5/16" 80 1.00
80014 2-1/2" 1-9/16" 80 1.91
T/O 80008 3" 1-13/16" 80 2.89

T/O T/O 80015 1" x 1" x 3/4" x 3/4" 7/8" 40 0.28

80025 3/4" 5/8" 40 0.09

90° ELBOW &
80026 1" 3/4" 40 0.14
REDUCING ELBOW
80027 1-1/4" 7/8" 40 0.21
X 80028 1-1/2" 1-1/16" 80 0.40
T/O 80029 2" 1-5/16" 80 0.79
80030 2-1/2" 1-9/16" 80 1.14
80031 3" 1-13/16" 80 1.82
Y
XxY X Y
T/O
80032 1" x 3/4" 11/16" 13/16" 40 0.16

FIGURE 2 — FITTING DIMENSIONS (Part 1 of 4)

Page 4 of 6 TFP1915

FITTING PART NOMINAL TAKE-OUT WEIGHT

NOMINAL SIZE SCHD. (lb.)
TYPE NUMBER (T/O)

45° ELBOW 80050 3/4" 3/8" 40 0.08

T/O 80051 1" 3/8" 40 0.11
80052 1-1/4" 3/4" 40 0.20
80053 1-1/2" 1/2" 80 0.31
T/O 80054 2" 3/4" 80 0.56
80055 2-1/2" 13/16" 80 0.89
80056 3" 1" 80 1.19

80075 3/4" 1/8" 40 0.07

COUPLING & 80076 1" 1/8" 40 0.11
REDUCING COUPLING 80077 1-1/4" 3/16" 40 0.12
80078 1-1/2" 3/16" 80 0.25
80079 2" 3/16" 80 0.38
80080 2-1/2" 1/4" 80 0.67
80081 3" 3/16" 80 0.91
T/O
80220 1" x 3/4" 1/8" 40 0.08

80200 1" x 3/4" 7/16" 40 0.04

80201 1-1/4" x 3/4" 1/2" 40 0.11
80202 1-1/4" x 1" 5/16" 40 0.12
80203 1-1/2" x 3/4" 5/8" 80 0.16
80204 1-1/2" x 1" 1/2" 80 0.14
REDUCER BUSHING 80205 1-1/2" x 1-1/4" 3/8" 80 0.17
80206 2" x 3/4" 13/16" 80 0.27
80207 2" x 1" 11/16" 80 0.26
80208 2" x 1-1/4" 9/16" 80 0.24
80209 2" x 1-1/2" 7/16" 80 0.19
80215 2-1/2" x 1" 15/16" 80 0.42
T/O
80214 2-1/2" x 1-1/4" 13/16" 80 0.45
80213 2-1/2" x 1-1/2" 11/16" 80 0.46
80211 2-1/2" x 2" 5/8" 80 0.29
80210 3" x 2" 3/4" 80 0.72
80212 3" x 2-1/2" 1/2" 80 0.47

CAP 80100 3/4" 5/16" 40 0.04

80101 1" 3/8" 40 0.06
80102 1-1/4" 7/16" 40 0.10
80103 1-1/2" 11/16" 80 0.20
80104 2" 5/8" 80 0.31
80105 2-1/2" 7/8" 80 0.58
T/O
80106 3" 1" 80 0.88

GROOVED T/O PIPE O.D.

COUPLING ADAPTER
80160 1-1/4" x 1-1/4" Groove 2-5/16" 1-1/4" (1.660") 40 0.78
80161 1-1/2" x 1-1/2" Groove 2-5/16" 1-1/2" (1.900") 80 0.95
PIPE 80162 2" x 2" Groove 2-5/16" 2" (2.375") 80 1.42
O.D.
80163 2-1/2" x 2-1/2" Groove 2-5/16" 2-1/2" (2.875") 80 2.28
80164 3" x 3" Groove 2-1/4" 3" (3.500") 80 3.00
T/O 80169 2-1/2" x 76,1 mm Groove 2-5/16" 76,1 mm (3.000") 80 2.28

FIGURE 2 — FITTING DIMENSIONS (Part 2 of 4)

TFP1915 Page 5 of 6

FITTING PART NOMINAL TAKE-OUT WEIGHT

NOMINAL SIZE SCHD.
TYPE NUMBER (T/O) (lb.)

SPRINKLER HEAD
ADAPTER
80175E 3/4" x 1/2" NPT 7/16" 80 0.20
80176E 1" x 1/2" NPT 7/16" 80 0.22
80175WL 3/4" x 1/2" NPT 7/16" 40 0.16
80179 1" x 3/4" NPT 13/16" 40 0.43
T/O

SPRINKLER HEAD
ADAPTER

80175W 3/4" x 1/2" NPT 1/2" 40 0.19

80176W 1" x 1/2" NPT 1/2" 40 0.18

T/O

SPRINKLER HEAD
ADAPTER (SPIGOT)
80177L 3/4" x 1/2" NPT 1/2" 40 0.16
80178 1" x 1/2" NPT 9/16" 40 0.20
80180 1" x 3/4" NPT 7/8" 40 0.40

T/O

FEMALE ADAPTER

80142 3/4" x 3/4" NPT 13/16" 40 0.41

80145 1' x 1" NPT 7/8" 40 0.63
80146 1-1/4" x 1-1/4" NPT 1-1/8" 40 1.03
80147 1-1/2" x 1-1/2" NPT 1-3/8" 80 1.42
80148 2" x 2" NPT 1-11/16" 80 2.66
T/O

MALE ADAPTER

80157 3/4" x 3/4" NPT 1-5/16" 40 0.33

80158 1' x 1" NPT 1-3/8" 40 0.56

T/O

XxYxZ X Y Z
SPRINKLER HEAD
80250 3/4" x 3/4" x 1/2" NPT 9/16" 9/16" 1" 40 0.22
ADAPTER TEE
Z 80251 1" x 1" x 1/2" NPT 11/16" 11/16" 1-3/16" 40 0.29
T/O 80249 1" x 1" x 1" NPT 15/16" 15/16" 1-9/16" 40 0.73
80256 1-1/4" x 1" x 1/2" NPT 7/16" 9/16" 1-5/16" 40 0.30
80252 1-1/4" x 1-1/4" x 1/2" NPT 7/16" 7/16" 1-5/16" 40 0.31
80257 1-1/2" x 1-1/4" x 1/2" NPT 1/2" 11/16" 1-7/16" 80 0.43
X Y
80254 1-1/2" x 1-1/2" x 1/2" NPT 1/2" 1/2" 1-7/16" 80 0.46
80258 2" x 1-1/2" x 1/2" NPT 1/2" 5/8" 1-11/16" 80 0.56
T/O T/O
80253 2" x 2" x 1/2" NPT 1/2" 1/2" 1-11/16" 80 0.62

FIGURE 2 — FITTING DIMENSIONS (Part 3 of 4)

Page 6 of 6 TFP1915

FITTING PART NOMINAL TAKE-OUT WEIGHT

NOMINAL SIZE SCHD.
TYPE NUMBER (T/O) (lb.)

XxYxZ X Y, Z
BACK-TO-BACK TEE
X
T/O

Y 80459 1" x 1/2" NPT x 1/2" NPT 5/8" 1-5/16" 40 0.48

80460 1" x 1/2" NPT x 1/2" NPT 5/8" 1-3/16" 40 0.46
Z

T/O T/O

BACK-TO-BACK CROSS XxYxZxW X, Y Z, W

X
T/O

Z
80462 1" x 1" x 1/2" NPT x 1/2" NPT 5/8" 1-3/16" 40 0.46
W
80463 1" x 1" x 1/2" NPT x 1/2" NPT 5/8" 1-5/16" 40 0.47
T/O
Y
T/O T/O

SPRINKLER HEAD XxY X Y

ADAPTER 90° ELBOW
Y
T/O

80199 3/4" x 1/2" NPT 9/16" 1" 40 0.20

80198 1" x 1/2" NPT 3/4" 1-1/4" 40 0.26
X 80196 1" x 3/4" NPT 1-1/16" 1-7/16" 40 0.26

T/O

FIGURE 2 — FITTING DIMENSIONS (Part 4 of 4)

by TFBP to be defective shall be either of merchantability and fitness for a par-

Limited repaired or replaced, at TFBP’s sole
option. TFBP neither assumes, nor
ticular purpose.

Warranty authorizes any person to assume for it,

any other obligation in connection with
This limited warranty sets forth the ex-
clusive remedy for claims based on
Products manufactured by Tyco Fire & failure of or defect in products, materi-
the sale of products or parts of prod-
Building Products (TFBP) are war- als or components, whether the claim
ucts. TFBP shall not be responsible for
ranted solely to the original Buyer for is made in contract, tort, strict liability
sprinkler system design errors or inac-
ten (10) years against defects in mate- or any other legal theory.
curate or incomplete information sup-
rial and workmanship when paid for plied by Buyer or Buyer’s repre- This warranty will apply to the full ex-
and properly installed and maintained sentatives. tent permitted by law. The invalidity, in
under normal use and service. This whole or part, of any portion of this
warranty will expire ten (10) years In no event shall TFBP be liable, in
warranty will not affect the remainder.
from date of shipment by TFBP. No contract, tort, strict liability or under
warranty is given for products or com- any other legal theory, for incidental,
ponents manufactured by companies indirect, special or consequential dam-
not affiliated by ownership with TFBP ages, including but not limited to labor
or for products and components which charges, regardless of whether TFBP
have been subject to misuse, improper was informed about the possibility of
installation, corrosion, or which have such damages, and in no event shall
not been installed, maintained, modi- TFBP’s liability exceed an amount
fied or repaired in accordance with ap- equal to the sales price.
plicable Standards of the National Fire The foregoing warranty is made in lieu
Protection Association, and/or the of any and all other warranties, ex-
standards of any other Authorities press or implied, including warranties
Having Jurisdiction. Materials found

TYCO FIRE & BUILDING PRODUCTS, 451 North Cannon Avenue, Lansdale, Pennsylvania 19446