Scribd
Upload
117 views2 pages

Butterfly Valves Gd-381: Specification

The document provides specifications for butterfly valves of model GD-381. The valves have a nominal pressure of 300PSI and can operate in temperatures between -20°C to 110°C. They comply with design standards API 609. The valves are available in sizes from 50mm to 400mm and can be actuated using standard mounting flanges or gear operators. The main materials used are ductile iron for the body and disc, EPDM for rubber seats and seals, and stainless steel for shafts. Flow characteristics of pressure drop versus flow rate are also provided.

Uploaded by

JOSE GABRIEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
117 views2 pages

Butterfly Valves Gd-381: Specification

The document provides specifications for butterfly valves of model GD-381. The valves have a nominal pressure of 300PSI and can operate in temperatures between -20°C to 110°C. They comply with design standards API 609. The valves are available in sizes from 50mm to 400mm and can be actuated using standard mounting flanges or gear operators. The main materials used are ductile iron for the body and disc, EPDM for rubber seats and seals, and stainless steel for shafts. Flow characteristics of pressure drop versus flow rate are also provided.

Uploaded by

JOSE GABRIEL
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BUTTERFLY VALVES GD-381

Specification: Design standard API 609


Nominal Pressure: 300PSI (21 bar)
Working temperature -20°C +110°C (-4°F +230°F)
Groove according to ASME B16.1
Top coupling flange ISO 5211
Test standard API 598

Actuation Options
• Standard ISO 5211 mounting flange
• 10-position handle (2 – 16"/DN50 – DN400)
Infinitely variable service with memory stop; Padlockable
• Gear operator (2 – 16"/DN50 – DN400)

Nominal Pipe Dimensions Operating


Size OD A B C D Torque Weight
mm mm mm mm mm mm N-m Kgs
in in in in in in In - Lb Lbs
50 60.3 81 64 63 106 9 3.1
2 2.375 3.19 2.52 2.48 4.17 80 6.8
65 73.0 97 80 68 111 14 3.6
2.5 2.875 3.82 3.15 2.68 4.37 120 7.9
80 88.9 97 92 76 126 18 4.2
3 3.500 3.82 3.62 2.99 4.96 160 9.2
100 114.3 116 118 89 135 51 5.7
4 4.500 4.57 4.65 3.50 5.32 450 12.5
150 168.3 148 172 114 184 102 11.3
6 6.625 5.83 6.77 4.49 7.24 900 25.0
200 219.1 133 222 140 208 136 16.8
8 8.625 5.24 8.74 5.51 8.19 1200 37.0
250 273.0 160 284 186 235 204 28.3
10 10.750 6.30 11.18 7.32 9.25 1800 62.2
300 323.9 166 334 213 260 282 36.4
12 12.750 6.56 13.15 8.39 10.24 2500 80.1
400 406.4 176.78 415.29 267.96 324.0 422 62.5
16 16 6.96 16.35 10.55 12.76 3750 137.5
BUTTERFLY VALVES GD-381

Material specifications

Part Specification American standard


Body Ductile iron ASTM A536 Grade 65-45-12
Disc Ductile iron ASTM A536 Grade 65-45-12
Rubber seat EPDM ASTM D2000
Upper and lower shafts 416 stainless steel ASTM A582
Shaft seal EPDM ASTM D2000
O-rings EPDM ASTM D2000
Actuator housing Ductile iron ASTM A536 Grade 65-45-12
Shaft 304 stainless ASTM A276
Handwheel pin 416 stainless steel ASTM A582
Handweel Ductile iron ASTM A536 Grade 65-45-12
Handle Ductile iron ASTM A536 Grade 65-45-12
O-ring EPDM ASTM D 2000

Flow Characteristics
PRESSURE DROP (PSI) VS. (GPM)
5.0

4.0
NOMINAL PRESSURE DROP IN POUNDS PER SQUARE INCH(PSI)

3.0

2.0
VE
AL

VE

VE
HV

VE
AL

VE
VE
AL

VE

VE
AL

VE
HV
NC

AL
AL
HV

AL

AL
HV

AL
INC

HV
2I

HV

1.0
HV

HV
NC

HV
NC

INC
221

NC

NC

INC

0.8
3I

NC
4I

5I

8I

12
6I

10

0.6
0.5

0.4

0.3

0.2

0.1
100 200 400 600 1000 2000 4000 6000 10000 15000

FLOW RATE IN GALLONS PER MINUTE(GPM)

You might also like