Scribd
Upload
53 views1 page

FGV Integra2 Longlive Test Certificate

The document reports the results of durability testing of hinges according to EN 15570/2008. The hinges were tested over 80,000 cycles at different load levels and the closing, opening and closing forces were measured initially and after the test. The hinges and mounting plates were bolted to particleboard and the maximum door deflection was within specifications.

Uploaded by

PedFerragens Metalnox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
53 views1 page

FGV Integra2 Longlive Test Certificate

The document reports the results of durability testing of hinges according to EN 15570/2008. The hinges were tested over 80,000 cycles at different load levels and the closing, opening and closing forces were measured initially and after the test. The hinges and mounting plates were bolted to particleboard and the maximum door deflection was within specifications.

Uploaded by

PedFerragens Metalnox
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CATAS S.p.A.

Sede: Via Antica, 24/3 Filiale:


Iscr. Reg. Imprese Udine 33048 S. Giovanni al Nat. UD Via Braille, 5
nr. iscr. C.F. 01818850305 Tel. 0432.747211 r.a. 20851 Lissone MB
Reg. Impr. UD 20663 Fax 0432.747250 Tel. 039.464567
centro ricerche-sviluppo e laboratori prove P. IVA : 01818850305 http://www.catas.com Fax 039.464565
settori legno-arredo, ambiente e alimenti C.Soc. € 984.250,00 i.v. [email protected] [email protected]

TEST REPORT FORMENTI & GIOVENZANA S.P.A.


VIA PIAVE 55-C.P. 58
224514 / 6 20837 VEDUGGIO CON COLZANO (MB)
ITALIA
Date received: 28/11/16
Date of test: 02/12/16
Date of issue: 10/01/17
Sample name: Integra click

Durability test EN 15570/2008, clause 6.3.7

Hinges pivoting on a vertical axis. Durability test EN 15570/2008, clause 6.3.7

Type of hinge: c
Cup diameter: 35 mm
Opening angle: 110°
Declared surface treatment: nickel
Type of door used for the test: B
Test door dimensions: 600 x 19 x 700 (height) mm
Number of hinges used for the test: 2 (second set of hinges)
Width door (W): 600 mm
Maximum allowable door deflection: 3 mm 5‰ di (W)

Test results:

Test Number Load Closing mechanism force Opening force Closing force Door
level of on door initial final initial final initial final deflection
cycles kg (min. 0,5 N) (min. 0,5 N) (max. 20 N) (max. 20 N) (max. 20 N) (max. 20 N) mm

3 80.000 2 1,1 0,8 4,0 4,3 1,0 1,5 2

Remarks: none

Notes: hinges and plates have been mounted on the particleboard by means of bolts.

This document is validated by digital signature and time stamping in accordance


with the Italian laws and the European Directives which regulate the electronic
signature systems.

Managing Director
Dr. Andrea Giavon

The sample name and, when relevant, its description, are given by the orderer, and CATAS does not assume responsibility on this matter. This test
report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be
reproduced in its entirety. Unless otherwise stated, sampling has been carried out by the orderer. pag. 1/1

You might also like