Scribd
Upload
1K views2 pages

Seismic Coefficient Calcualtions by NBC 105

This document provides seismic coefficients for design according to NBC 105:2020 for a 6m tall reinforced concrete building located in seismic Zone 0.35 on soil type A. The peak ground acceleration is 2.5g and the elastic design spectrum is 0.875g. The horizontal base shear coefficients are 0.145833g for the ultimate limit state and 0.14g for the serviceability limit state. Allowable drifts and displacements are also provided for code check.

Uploaded by

khem thapa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
1K views2 pages

Seismic Coefficient Calcualtions by NBC 105

This document provides seismic coefficients for design according to NBC 105:2020 for a 6m tall reinforced concrete building located in seismic Zone 0.35 on soil type A. The peak ground acceleration is 2.5g and the elastic design spectrum is 0.875g. The horizontal base shear coefficients are 0.145833g for the ultimate limit state and 0.14g for the serviceability limit state. Allowable drifts and displacements are also provided for code check.

Uploaded by

khem thapa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SEISMIC COEFFICIENT AS PER NBC 105:2020

Seismic Zoining Factor (Z)= 0.35


Importance Factor (I)= 1
Height of Building (h)= 6
Soil Type A

Period of Vibration:
For Reinforced Moment Resisting Frame Kt= 0.075
T1=1.25*Kt*h^0.75 (Sec) 0.359405
Lower Period of the Flat Part of the Spectrum Ta= 0
Upper Period of the Flat of the Spectrum Tc= 0.5
Peak Spectral Acceleration Normalized by PGAo= 2.5
Coefficient to control the descending branch of the Spectrum K= 1.8
Calculation of Spectral Shape Factor : Ch (T)
Since Ta<=T1<=Tc
Ch(T)= 2.5
Elastic Site Spectra for the Horizontal Loading ( Clause 4.1.1 NBC 105-2020)
C(T)=Ch(T)*Z*I= 0.875
Elastic Site Spectra for the SLS state ( Clause 4.2 NBC 105-2020)
Cs(T1)=0.2*C(T)= 0.175
Horizontal Base Shear Coefficient for Equivalent Static Method:
Ref Table 5.2 NBC 105:2020
Ductility Factor for ULS State (Ru)= 4
Overstrenght Factor for ULS State (Wu)= 1.5
Overstrenght Factor forSLS State (Ws)= 1.25

Horizontal Base Shear Coefficient at the ULS State


Cd(T1)=C(T)/(Ru*Wu)= 0.145833

Horizontal Base Shear Coefficient at the ULS State


Cd(T1)=Cs(T1)/*Ws= 0.14

Exponent related to the structural period (K)= 1


Displacement Criteria For Equivalent Static Method: ALONG X DIR.
Allowable ratio ULS 0.025 mm
Allowable Displacement ULS=0.025*H/Ru= 37.5 mm
Allowable ratio SLS 0.006 mm
Allowable Displacement SLS=0.006H/Rs= 36 mm
Drift Criteria For Equivalent Static Method: ALONG X DIR.
Storey Drift From ETABS ULS 0.025 OK
Allowable Drift ULS=0.025/Ru= 0.00625
Storey Drift From ETABS SLS 0.006 OK
Allowable Drift SLS=0.006/Rs= 0.006
Displacement Criteria For Equivalent Static Method: ALONG Y DIR.
Allowable ratio ULS 0.025 mm
Allowable Displacement ULS=0.025*H/Ru= 0 mm
Allowable ratio SLS 0.006 mm
Allowable Displacement SLS=0.006H/Rs= 0 mm
Drift Criteria For Equivalent Static Method: ALONG Y DIR.
Storey Drift From ETABS ULS 0.025 OK
Allowable Drift ULS=0.025/Ru= 0.025
Storey Drift From ETABS SLS 0.006 OK
Allowable Drift SLS=0.006/Rs= 0.006

You might also like