Smart Glove For Sign Language Translation Using Arduino: KEC Conference KEC Conference
Smart Glove For Sign Language Translation Using Arduino: KEC Conference KEC Conference
I. INTRODUCTION
the movement of user. The problem with order to match the resultant output with
this work is it can detect only few letters pre-stored values of different signs
[6]. regarding the alphabets. For this,
appropriate ranges are set for each
“A Review Paper on Smart Glove - alphabet and the words that can be
Converts Gestures into Speech and Text” recognized with single hand based on the
uses five flex sensors and accelerometer measured data obtained from repeated
attached on the back of the glove to measurements. A Bluetooth module is
measure the bending and motion of the connected to Arduino UNO. The
hand. The problem with this work is to Processed data’s are then transferred to the
recognize some letters. Besides that, letters Bluetooth module (transmitter) obtained in
M, N, O, R, S, T, V and X cannot be string format. The Android mobile also
displayed due similar in gesture with have an inbuilt Bluetooth capability. These
another letters [7]. two Bluetooth devices are then paired, and
string is transmitted to Android mobile.
“Digital Text and Speech Android mobile receives data via
Synthesizer Using Smart Glove for Deaf Bluetooth in bytes format, convert them
and Dumb” uses five flex sensor to detect into string. Finally, the string is converted
gesture and accelerometer used for sensing into voice using the text to speech
axis x, y and z, find the angle of the glove application of Android mobile. This
tilted with respect to the. The glove is overall system is mounted over a normal
capable of translating their sign language glove for easy handling and recognizes the
gestures into speech through android hand gestures accurately.
phone. This smart glove focuses the
translation of gestures of words only [8]. The work also transforms voice to
respective text and sign. Speech recognizer
, “Smart Glove: Gesture Vocalizer detects the speech and converts into
for Deaf and Dumb People” uses glove at respective text. The image of used letters
the transmitter side which has to be worn and words are stored in database. The text
by the user. This glove is mounted with 4 from speech recognizer is compared with
flex sensors each on the 4 fingers of the name of image and required image is
glove namely thumb, index, middle and displayed.
ring. This work also focuses the translation
of gestures of words only [9]. The work also transforms text to
respective voice and sign. Google-text-to-
III. WORKING speech converts the typed text into
PRINCIPLE respective speech. The text from speech
recognizer is compared with name of
The flex sensor measures the image and required image is displayed.
bending of fingers according to gesture
and outputs change in resistances
corresponding to the amount of bending.
Accelerometer sensor measures the linear
movements of hand in X-axis and outputs
different values of X corresponding to the
movement in X-axis. Touch sensor
measures if there is any contact between
two fingers. All the data’s from sensors are
then processed on Arduino UNO involves
combination of all the sensor outputs in
Touch Turn on
Sensors Bluetooth If voice
Connect
to Smart Yes
Sound & Glove
Gesture Convert
Mobile Android to text
Bluetooth Mobile and
Receiver Micro-
Waiting gesture
phone
for data
No
Android Text If text
Application If data
received
Convert
VI. FLOW CHART OF SMART Convert
to voice
to text
GLOVE and
gesture
Turn on Glove
Translate
to voice
Read sensor data
Sign Output
Speak
“Hello”