KTR ROTEX® 19 Series
• High-Quality Spider Design
• Handles the Most Demanding Applications
• Max Torque of 558 in-lb.
FEATURES
• Allows for Different Bore Diameters
• No Maintenance
• Requires Three Individual Part Numbers
• Easy Assembly
• Wide Variety of Sizes
ROTEX ® couplings are designed to transmit torque between drive and driven components via
curved jaw hubs and elastomeric elements commonly known as spiders. The combination between
these components provides dampening and accommodation for misalignments. This product is
available in a variety of metals, elastomers and mounting configurations to meet your specific needs.
DESCRIPTION
Ordering Guideline: There are three individual part numbers you will need for a complete
coupler (i.e., 2 Hubs and 1 Spider). Please choose the hub sizes that match the criteria for your
application. In addition to the hubs, you will need to choose a spider, from the spider section.
Customization options are available; allow Anaheim Automation to specify the coupling designed for your
application!
SPECIFICATIONS
L011391
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Inch Bores
Outside Length Coupling
Bore Setscrew
Keyway Hub Diameter Thru Bore Length t E
Item Diameter Torque G Material
(in) Design DH, D, D1 “l1, l2” “L” (in) (in)
(in) (in-lb)
(in) (in) (in)
KTR-BA020196070611 1/4 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196070711 5/16 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196070902 3/8 3/32 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196070903 3/8 1/8 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196070911 3/8 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071101 7/16 3/32 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071102 7/16 1/8 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071111 7/16 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071200 1/2 1/8 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071211 1/2 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071400 9/16 1/8 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071411 9/16 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071500 5/8 3/16 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071503 5/8 5/32 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071511 5/8 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071700 11/16 3/16 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071900 3/4 3/16 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
SPECIFICATIONS
KTR-BA020196071901 3/4 1/8 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196071911 3/4 No Key 1 1.61, 126, - 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196107200 13/16 3/16 1a - , - , 1.61 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196172200 7/8 3/16 1a - , - , 1.61 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196172202 7/8 1/4 1a - , - , 1.61 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196172211 7/8 No Key 1a - , - , 1.61 0.98 2.60 18 0.39 0.62 M5 Aluminum
KTR-BA020196172300 15/16 1/4 1a - , - , 1.61 0.98 2.60 18 0.39 0.62 M5 Aluminum
Metric Bores
Outside Length Coupling
Bore Setscrew
Keyway Hub Diameter Thru Bore Length t E
Item Diameter Torque G Material
(mm) Design DH, D, D1 “I1 I2” “L” (mm) (mm)
(mm) (Nm)
(mm) (mm) (mm)
KTR-BA020196000600 6 2 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196000800 8 2 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196000900 9 3 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001000 10 3 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001100 11 4 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001200 12 4 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001400 14 5 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001500 15 5 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001600 16 5 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001800 18 6 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196001900 19 6 1 41, 32, 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196102000 20 6 1a - , - , 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196102200 22 6 1a - , - , 41 25 66 2 10 16 M5 Aluminum
KTR-BA020196102400 24 8 1a - , - , 41 25 66 2 10 16 M5 Aluminum
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
Spiders
Temperature
Max Rated
Type/ Max Torque Rating for
Item Color Material Speed Torque
Hardness (in-lb) Continuous
SPIDERS
(rpm) (in-lb)
Use
KTR-020191000045 Orange T-PUR 92 Shore-A 16,700 88.50 170 -50ºC-+150ºC
KTR-020191000042 Purple T-PUR 98 Shore-A 16,700 150.46 150 -50ºC-+150ºC
KTR-020191000020 Green T-PUR 64 Shore-D 16,700 185.86 180 -50ºC-+150ºC
KTR-020191000075 Grey Polyetherethertone - - 265.52 531 Up to +180ºC
HUB DIAGRAM
Standard Hub Spider Large Hub
Angular Misalignment ΔKw
Axial Misalignment ΔKa Parallel Misalignment ΔKr [degrees]
SHAFT MISALIGNMENT
Lmax. = L + ΔKa ΔKw [in] = Lmax - Lmin
ROTEX® Size 14 19 24 28 38 42 48 55 65 75 90
Max. Axial Misalignment -0.02 -0.02 -0.02 -0.03 -0.03 -0.04 -0.04 -0.04 -0.04 -0.06 -0.06
+0.04 +0.05 +0.06 +0.06 +0.07 +0.08 +0.08 +0.09 +0.10 +0.12 +0.13
ΔKa [in]
Max. Parallel Misalignment at
0.006 0.007 0.008 0.009 0.010 0.011 0.013 0.014 0.015 0.017 0.018
n=1,800 rpm ΔKr [in]
Max. Angular Misalignment at
1.1 1.0 0.8 0.9 0.9 1.0 1.1 1.1 1.1 1.1 1.2
n=1,800 rpm ΔKw [Degree]
ΔKw [in] 0.024 0.029 0.031 0.031 0.051 0.067 0.079 0.090 0.102 0.126 0.161
The above misalignment figures for ROTEX® couplings are standard values, taking into account the load of the
coupling up to the rated torque TKN and an operating speed n = 1,800 RPM along with an ambient temperature of +30ºC.
For other operating parameters, please ask for KTR-Norm 20240 on misalignments for ROTEX®. The maximum angular and
parallel misalignments must not be used concurrently. For example; 70% of the maximum parallel value allows 30% of the
maximum angular value. Also, care should be taken to accurately maintain the distance dimension “E”, allowing for axial
clearance of the coupling while in operation. In case of an axial thrust, the dimension “L” must be taken as a minimum
dimension in order to keep the spider free from pressure against the face. Detailed installation instructions are available at
www.ktr.com.
4985 East Landon Drive Anaheim, CA 92807 Tel. (714) 992-6990 Fax. (714) 992-0471 www.anaheimautomation.com
