Scribd
Upload
539 views

Drishti Software Installation Manual

This document provides instructions for installing driver software for the Drishti airport instrumentation system. It describes inserting the installation CD and DVD to load the runtime engine and instrument drivers. It also provides directions for configuring IP addresses of PCs and checking connectivity between the cRIO devices in the field and the RVR computer at the air traffic control center. Screenshots are included showing the Drishti single station, two station, and three station software displays and panels.

Uploaded by

Zaid Dewachi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
539 views

Drishti Software Installation Manual

This document provides instructions for installing driver software for the Drishti airport instrumentation system. It describes inserting the installation CD and DVD to load the runtime engine and instrument drivers. It also provides directions for configuring IP addresses of PCs and checking connectivity between the cRIO devices in the field and the RVR computer at the air traffic control center. Screenshots are included showing the Drishti single station, two station, and three station software displays and panels.

Uploaded by

Zaid Dewachi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

SOFTWARE MANUAL

AIRPORT INSTRUMENTATION GROUP

CSIR-- NATIONAL AEROSPACE LABORATORIES


Bangalore 560017

Doc No: PD AIG 05 - 0215 NAL


DRISHTI SOFTWARE INSTALLATION
How to Install Driver Software in the PC at ATC & MBR
A DVD and a CD will be supplied with the system.
a) CD --- contains three folders viz., 1)Runtime Engine, 2) Drishti RVR
software and 3) Integrated Drishti Software

b) DVD – contains Instrument drivers.

To Install Runtime Engine.

Insert the CD in the CD Driver.

Open the “Runtime Engine” folder and there will be a Zip file (RTE LV 2014)

Unzip the file and install the “Runtime Engine” .

After successful installation, it will prompt for Restart or Cancel.

Select Cancel.
Procedure to Load Instrument Drivers.

Remove the CD from the PC and load the DVD.

Open the DVD on the screen

You will see -- Autorun.exe file

Double click on Autorun.exe

It will prompt you with an option for „Next‟ or „Cancel‟.

Click on „Next‟ for all the pop up windows that gets displayed.

Only for, Licence agreement click on “I accept “

Go to „Next‟

After the successful installation of the driver software,


Pop window will open up as “Restart” or “Cancel”
Click on Restart.
After the successful installation of the Runtime Engine and
Instrument Drivers

Copy and Paste the folder named DRISHTI from CD to the Desktop of the
PC at the MBR

For RVR Computation at MBR, Double click on the Drishti.exe


program

For Multiple display PCs ,

Copy and Paste the folder named Integrated Drishti from CD to the
Desktop.

To run the Integrated display software, double click on


“ integrateddrishti.exe”
Configuring IP address of the PCs Go to Start ---- Press enter Key
Go to Settings --- Press enter Key -
Go to Network connections in the
displayed window.
A new Network connection window will
pop up
Double click on Local area connection
icon.
A new local area connections status
window will open,
Click on Properties tab
Local area connection properties
window will pop up.
Double click on Internet protocol
(TCP/IP)
Internet protocol(TCP/IP) properties
window will open up
Configure the IP configuration
settings in the window and click ok.
PC will prompt you for rebooting,
Allow it for rebooting.
Now the configured IP addresses will
be permanently stored in the PC
Disable all antivirus software if the configuration is not allowed or if problem arises
IP Settings for MBR PC (where Drishti RVR software is
installed) :
IP address: 192.168.7.40
Sub net Mask: 255.255.255.0
Gateway: 192.168.7.1

IP Settings for Slave display PCs (where Drishti Integrated software is


installed) :
PC1 --- IP address: 192.168.7.41 PC2: IP address: 192.168.7.42 etc
Sub net Mask: 255.255.255.0
Gateway: 192.168.7.1

For configuring the Wi-Fi radio modem :


You can configure any settings above 200 series, for example like
192.168. 7. 200 for transmitter and 192.168. 7. 201 for receiver
Gate way: 192.168.7.1
Sub net Mask: 255.255.255.0
How to check connectivity between cRIO (at Fieldsite) to
Drishti RVR Computer at MBR

How to PING between RVR PC at MBR and cRIO at fieldsite!

In the MBR PC
1 Click on START from DESK TOP

2 Click on RUN 3. Type CMD in the POP up window


4. This will launch the
Command prompt Window

5. Type Ping (space) IP address


(for example Ping 192.168.7. (rwy no)

For runway 27, it will be


Ping 192.168.7.27
For 09--- Ping 192.168.7. 9
For Mid: Ping 192.168.7. 18

The message has to come on Packets :


the monitor screen Sent = 4, Received = 4, Lost = 0 (0% loss)

This confirms the communication between Drishti


computer at MBR and cRIO at fieldsite
If the Pinging is not successful, the following may be the reasons
For LAN:
1. Check for proper LAN cable connectivity
2. Check whether Ethernet switch is powered or not
3. Check whether Firewall / Antivirus is enabled. – This should be Always
Disabled.
To Wi-Fi connectivity
1. Check the Wi-Fi radios whether powered or not
2. Check whether Ethernet switch is powered or not
3. Check the line of sight between Wi- Fi transmitter and Receiver. They
should be facing each other (Always 100% Signal strength should be
there)
4. Check power to cRIO

For every data reception from the field site radio, at an


interval of every 10 seconds, the LAN LED will blink, indicating
that the data is received at the configured 10seconds interval.
DRISHTI SINGLE STATION SOFTWARE PANEL
Front Panel

Sensor details and Graph

Integrated RVR data display


Drishti RVR Display software for two stations

RVR Display software for two stations

2 Station Sensor details Panel

Integrated Drishti RVR Display


3 stations Drishti RVR Display & Integrated software

3 stations Drishti RVR Display Panel 3 stations Sensor details Panel

Integrated RVR Display for 3 stations

You might also like