LtAP mini series
LtAP mini series
The LtAP mini LTE kit is a small watherproof wireless access point with a built in cellular modem that supports
2G (international version only), 3G and 4G (LTE) connectivity. It is also available separately, without the modem,
so you can use your own.
Connect to the LtAP mini’s built-in 802.11b/g/n wireless and access the LTE network from your phone or any
other wireless device. The LtAP mini LTE also has one 10/100 Ethernet LAN port for your wired devices. The
RS232 serial port gives you console access for debugging.
• 2.4 GHz AP in a rugged case
• miniPCIe for LTE
• Two SIM slots
• Built in GPS
• Serial port for other devices
• Perfect for cars or outdoor mobile applications
LtAP mini has a special enclosure with with a wall mounting kit, two SIM slots to alternate between cellular
providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses
or trains. External GPS antenna is available for ordering separately (not included, product code ACGPSA).
The LTE card is connected to two internal antennas with u.FL connectors, so if you want, you can unplug
the connectors and add your own external LTE antenna for better coverage. The unit has several powering
options: 9-30 V PoE-in by Ethernet port, DC jack and microUSB.
Use the built in GPS module to track the location of your vehicle in real time, we have even provided a simple
tracking application example in the RouterOS documentation, to help you start development of your platform.
PoE injector 24 V 1.2 A
power adapter
Three versions are available:
• LtAP mini LTE kit (RB912R-2nD-LTm&R11e-LTE) includes LTE modem that supports International LTE
bands 1,2,3,7,8,20,38 and 40.
• LtAP mini LTE kit-US (RB912R-2nD-LTm&R11e-LTE-US) includes LTE modem that supports LTE bands
2,4,5 and 12, mostly used by mobile operators in United States, Canada and Latin America.
• LtAP mini (RB912R-2nD-LTm) is shipped with without LTE card installed (empty miniPCI-e slot), so you can
use your own LTE card.
LtAP mini series 1
LtAP mini series
Specifications
Product code RB912R-2nD-LTm&R11e-LTE RB912R-2nD-LTm&R11e-LTE-US RB912R-2nD-LTm
CPU QCA9531 650 MHz
Size of RAM 64 MB
Storage 16 MB
10/100 Ethernet ports 1
Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain
Wireless chip model QCA9531
Wireless regulations Specific frequency range can be limited by country regulations
Antenna beam width 360°
Wireless antenna gain 1.5 dBi
GPS Built-in MT3337V, with uUFL RF connector and active antenna support
PoE in Yes
SIM slot 2 Mini SIM slots
None
LTE modem Included Included
(slot for miniPCI-e LTE card available)
LTE category 4 (150Mbps Downlink, 50Mbps Uplink) -
R8 (Cat24 - 42.2Mbps Downlink)
3G category R7 (21Mbps Downlinks, 5.76Mbps Uplink) -
R7 (Cat14 - 21.1Mbps Downlink)
2G category Class12 -
LTE antenna gain 3.5 dBi (with uFL connector)
Serial port RS232 (shared with GPS port)
PoE in: 10 V - 57 V (Passive PoE and 802.3af/at with unshielded cable)
Supported input voltage DC jack: 8 - 30 V
MicroUSB: 5 V
Dimensions 139 x 77 x 28,5 mm
Operating temperature -40°C .. +70°C tested
License level 4
Operating System RouterOS
Max Power consumption 9W 4W
Wireless specifications Supported bands
1MBit/s 22 -96 RB912R-2nD-LTm&R11e-LTE
11MBit/s 22 -89 LTE (FDD) bands 1/2/3/7/8/20 (2100/1900/1800/2600/900/800)
6MBit/s 20 -93 LTE (TDD) bands 38/40 (2600/2300)
54MBit/s 18 -74 3G bands 1/2/5/8 (2100/1900/800/900)
MCS0 20 -93 2G bands 2/3/5/8 (1900/1800/800/900)
MCS7 16 -71
MCS7 16 -71 RB912R-2nD-LTm&R11e-LTE-US
LTE (FDD) bands 2(1900)/4(1700)/5(850)/12(700)
3G bands 2(1900)/5(850)
LtAP mini series 2
