Proforma Invoice
No. 0000009620
Date: February 4, 2010
M/S Electrozone Corporation
F-2, First Floor Mayfair Center,
Saddar,Karachi-Pakistan.
Attn: Mr. Ali S Rizvi
Pos Part No/Description Qty Net Price Price Euro
1 46881 01 10,229.00 10,229.00
Abbemat HP
High Precision Automatic Refractometer
for determination of refractive index, Brix, concentration and RI-
derived results of liquid and solid samples. With robust design for all
environmental measuring conditions and high accuracy over the
entire measure range. For horizontal and vertical operation.
1.1 Measuring Performance
Measuring method: Critical angle of total reflection
Special features:
▪ Hermetically sealed housing – Aggressive
solutions/gasses/dusts cannot enter and destroy the
instruments internal optics and electronics.
▪ Vertical operation mode – Liquid samples with solid particles
or fibers can be measured without sedimentation derived
measuring errors.
▪ Fast Peltier temperature control – High performance Peltier
elements provide for an accurate set sample temperature within
seconds.
▪ Optimized prism muld – A precise manufactured prism muld
with no clearance between prism and holder provides for easy
cleaning and no carry-over.
Measuring range: 1.32 – 1.56 nD
Accuracy refractive index: ± 0.00002 nD *
Measuring range Brix: 0 – 100 %
Accuracy Brix: ± 0.015 %
Range of sample temperature control: 10 °C to 70 °C
Sample/prism temperature accuracy: 0.03 °C *
Minimum sample amount:
Approx. 0.5 mL without cell
Approx. 200 µL with micro flow cell (optional)
Thermostat speed: A sample volume of 1 mL is thermostated from
18 – 22 °C (room tempera-ture) to 20.0 °C in approximately 20
seconds **
Calibration: One or two point calibration
* valid at 20.0 °C
** valid for aqueous samples
Proforma Invoice
No. 0000009620
Page 2
Pos Part No/Description Qty Net Price Price Euro
1.2 General Technical Data
Interfaces: RS-232
RS-232 to CAN-interface box for optional connection to DMA M, MCP
or MCP Sucromat
Supported input/output devices (PC):
Mouse, Keyboard, Touch-screen (ASUS EeeTop ET-1602)
Prism: Yttrium-Aluminium-Garnet (YAG)
Housing: Stainless steel
Wetted parts: YAG, stainless steel
Seals: FKM (standard) or FFKM (optional)
Power supply: AC 100 to 240 V; 50/60 Hz
Power consumption: Min. 10 W to max. 100 W depending on
sample set temperature and ambient temperature
Dimensions (L x W x H):
▪ Measuring unit: 180 x 120 x 140 mm (7.1 x 4.7 x 5.5 inches)
▪ Power supply: 135 x 80 x 220 mm (5.3 x 3.2 x 8.7 inches)
Weight: Measuring unit: 6 kg (13.2 lbs)
Power supply: 2 kg (4.4 lbs)
1.3 AbbematPC Features
Scales:
▪ 30 preinstalled scales for standard applications
▪ Freely customizable scale
▪ Complete mathematical formula parser
Data export (via PC):
▪ Printer
▪ Memory stick (PDF, XLS, TXT files)
▪ Local network
QM features:
Full GMP/GLP and 21 CFR Part 11 compatibility
Password protection for three different user levels
Audit trail
Tamper-proof export of audit trail files
Compliance:
▪ AOAC
▪ ASTM
▪ ICUMSA
▪ OIML
Proforma Invoice
No. 0000009620
Page 3
Pos Part No/Description Qty Net Price Price Euro
1.4 Included Accessories
Mat. No. 47380 1 # instruction manual
Mat. No. 47380 1 # AbbematPC (CD-ROM)
Mat. No. 65146/61865/ 52656 1 # power cord Europe/UK/USA
Mat. No. 47277 1 # connection cable
Mat. No. 51015 2 # fuse 5x20mm, 3.15A slow-blow, DIN 41662
Mat. No. 47466 1 # RS-232 interface cable
Mat. No. 46931 1 # drying cartridge
Mat. No. 47447 5 # Pasteur pipets (3 mL)
Ex Work Price 10,229.00
Airfreight charges 400.00
Total Price Euro 10,629.00
OPTION
Pos Part No/Description Qty Net Price Price Euro
SAMPLE CELLS
1 46925 01 1,177.00 1,177.00
Flow cell (funnel inlet / hose outlet)
2 46926 01 981.00 981.00
Flow cell (double hose fitting)
3 12578 01 785.00 785.00
Micro flow cell
4 46927 01 647.00 647.00
Sample presser
HARDWARE ACCESSORIES
1 90932 01 610.00 610.00
Abbemat/RXA interface bo
REFRACTIVE INDEX CALIBRATION STANDARDS
1 92322 01 285.00 285.00
Water (10mL)
2 46929 01 201.00 201.00
Tetrachloroethylene (10mL)
3 92325 01 201.00 201.00
Chlorobenzene (10mL)
4 92327 01 201.00 201.00
Chlorocyclohexane (10mL)
5 92328 01 201.00 201.00
Dichlorotoluene (10mL)
Proforma Invoice
No. 0000009620
Page 4
OPTION
Pos Part No/Description Qty Net Price Price Euro
6 92329 01 201.00 201.00
Dodecane (10mL)
7 92330 01 201.00 201.00
Ethanol (10mL)
8 92331 01 201.00 201.00
Isooctane (10mL)
TERMS & CONDITIONS:
Make : Anton Paar GmbH, Austria
Delivery : 6 to 8 weeks after Receipt of order
Payment : Letter of Credit in favour of Anton Paar Gmbh
Against an irrevocable Letter of Credit accoring to the UCP, 2007 revision, ICC
Publication no. 600 opened directly to UNICREDIT BANK AUSTRIA AG
GRAZ/AUSTRIA, IBAN: AT71 1100 2320 7000, ACCOUNT NO: 0038 2320 7000,
BIC: BKAUATWW.
All Banking charges inside pakistan and out side of pakistan will be on openers
account
Validity : 45 days
Warranty : 1 year excluding glass part
Installation : Complementary installation at site
Training : Complementary training to your lab chemist
Trusting you that our quotation will find your approval, we look forward to receiving your order. In the
meantime we remain with our best regards.
Yours faithfully
FOR H.A. SHAH & SONS
ZULFIQAR BOKHARI
(Director)
Proforma Invoice
No. 0000009621
Date: February 4, 2010
M/S Electrozone Corporation
F-2, First Floor Mayfair Center,
Saddar,Karachi-Pakistan.
Attn: Mr. Ali S Rizvi
Pos Part No/Description Qty Net Price Price Euro
1 88784 01 15,370.00 15,370.00
MCP 300
for determination of optical rotation, specific rotation, concentration
and international sugar scales (ISS) of samples with an optical
density (OD) up to 4.0 at 589 nm. With modular design for specific
configurations and future upgrades, high accuracy over the entire
measuring range, automatic sample cell and quartz control plate
identification and option to have up to eight wavelengths.
1.1 Measuring performance
Measuring method: Circular polarimeter
Temperature reading: Temperature input for sample cell and
quartz control plate equipped with temperature sensors Pt 100
Special features: . Toolmaster™ (Option) - Automatic identification
of the sample cell to prevent incorrect sample cell selection and
ensure easy system configuration.
Toolmaster™ - Automatic sample cell identification to prevent
incorrect sample cell selection. Unique sample cell identification and
easy system configuration.
Toolmaster™- Automatic quartz control plate identification to
prevent incorrect calibration procedure being used.
Peltier element (Option) for automatic temperature control at in a
range from 15 °C to 45°C, which can be ordered with the instrument
or installed later as an upgrade.
Measuring range: ± 89.9 °
Accuracy Optical Rotation: ± 0.0.003°
Temperature range of Peltier element: 15 °C and 45 °C
Temperature accuracy: 0.1 °C
Repeatability in Optical Rotation : ± 0.003°
Minimum sample amount: 0.2mL
Response time: 15 seconds
Adjustment: Quartz control plate with manufacturer’s certificate.
Also available: PTB certificate on request.
Toolmaster™ (optional) - Automatic Automatic quartz control plate
identification eliminates calibration errors.
1.2 Firmware features
Methods: Freely customizable methods (8 preinstalled methods for
standard applications)
Data memory: 2 gigabytes
▪ Statistical functions built-in (mean, std. dev., min., max.)
Proforma Invoice
No. 0000009621
Page 2
Pos Part No/Description Qty Net Price Price Euro
Data export: Printer
▪ Memory stick (PDF, XLS, TXT files)
▪ Local network
QM features: Full GMP/GLP and 21 CFR Part 11 compatibility
▪ Password protection for three different user levels
▪ Audit trail
▪ Tamper-proof export of audit trail files
1.3 General technical data Interfaces:
▪ RS232
▪ 4 # USB
▪ CAN (Controller Area Network)
▪ VGA (Video Graphics Array)
▪ Ethernet
Supported input/output Devices:
▪ Keyboard, mouse, bar code reader, memory stick
▪ Pos printer (RS232), office printer connected via USB or
Ethernet (Canon Bubble Jet, Epson Esc/P2, Epson Stylus, HP
and PCL compatible)
▪ External terminal, external touchscreen
Display: Graphical, brightly colored 6.5 inches TFT touchscreen
(640 x 480 px) with customizable display layout
User elements: Touchscreen, Soft keys
Housing: Polystyrene / butadiene
Wetted parts: Borosilicate glass, stainless steel
Power supply: AC 100 to 240 V; 50/60 Hz
Power consumption: 70 to 100 VA
Dimensions (L x W x H): 754 x 392 x 231 mm (29.7 x 15.5 x 9.1
inches)
Weight: Approx. 32 kg (70.5 lbs)
1.4 Included accessories
Mat. No. 88788 1 # instruction manual
Mat. No. 65146 1 # power cord (Europe) USA/UK also available
Mat. No. 48287 1 # polarimeter lamp
Mat. No. 51015 1 # fuse 5x20mm, 3.15A slow-blow, DIN 41662
Ex Work Price 15,370.00
Airfreight charges 400.00
Total Price Euro 15,770.00
Proforma Invoice
No. 0000009621
Page 3
Option:
Pos Part No/Description Qty Net Price Price Euro
RECOMMENDED SAMPLE CELL
1 88801 01 1,360.00 1,360.00
Polarimeter tube, stainl. Steel, 100 mm, FF/HO, PT100, Toolmaster
2 49642 01 768.00 768.00
Polarimeter tube, glass, 100 mm, filler tube NS 7.5, PTFE stoppers,
temp
3 92175 01 860.00 860.00
Polarimeter tube, stainl. Steel, 100 mm, FF/HO, Toolmaster
QUARTZ CONTROL PLATES (OPTIONAL)
1 92181 01 1,375.00 1,375.00
Quartz control plate 17° OR Toolmaster
OPTIONS
1 90931 01 2,570.00 2,570.00
Peltier module for automatic temperature control
2 88790 01 2,277.00 2,277.00
Multi wavelength option
3 88791 01 449.00 449.00
Interference filter in mount 365 nm
4 88792 01 449.00 449.00
Interference filter in mount 405 nm
5 88794 01 449.00 449.00
Interference filter in mount 436 nm
6 88795 01 449.00 449.00
Interference filter in mount 546 nm
7 88796 01 449.00 449.00
Interference filter in mount 578 nm
8 89116 01 449.00 449.00
Interference filter in mount 880 nm
Proforma Invoice
No. 0000009621
Page 4
TERMS & CONDITIONS:
Make : Anton Paar GmbH, Austria
Delivery : 6 to 8 weeks after Receipt of order
Payment : Letter of Credit in favour of Anton Paar Gmbh
Against an irrevocable Letter of Credit accoring to the UCP, 2007 revision, ICC
Publication no. 600 opened directly to UNICREDIT BANK AUSTRIA AG
GRAZ/AUSTRIA, IBAN: AT71 1100 2320 7000, ACCOUNT NO: 0038 2320 7000,
BIC: BKAUATWW.
All Banking charges inside pakistan and out side of pakistan will be on openers
account
Validity : 45 days
Warranty : 1 year excluding glass part
Installation : Complementary installation at site
Training : Complementary training to your lab chemist
Trusting you that our quotation will find your approval, we look forward to receiving your order. In the
meantime we remain with our best regards.
Yours faithfully
FOR H.A. SHAH & SONS
ZULFIQAR BOKHARI
(Director)
