Current issue date: 1 June 2020 Original approval(s):
Expiry date: 31 May 2023 ISO 9001 - 12 November 1993
Certificate identity number: 10263832
Certificate of Approval
This is to certify that the Management System of:
Miba Industrial Bearings U.S., LLC.
1111 Cedar Creek Road, Grafton, WI, 53024, United States
has been approved by Lloyd's Register to the following standards:
ISO 9001:2015
Approval number(s): ISO 9001 – 0011542
This certificate is valid only in association with the certificate schedule bearing the same number on which the locations applicable
to this approval are listed.
The scope of this approval is applicable to:
Design and Manufacture of Specialized Hydrodynamic Bearings including Tilting Pad Journal, Self-Equalizing Thrust and Various
Fixed Geometry Journal, Thrust Bearings and Pedestals/Housings for the Manufacturers of Motors, Turbines, Pumps,
Compressors, Gears, Ships, Locomotives and Drive Systems.
Cliff Muckleroy
Area Operations Manager Americas
Issued by: Lloyd's Register Quality Assurance, Inc.
for and on behalf of: Lloyd's Register Quality Assurance Limited
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance, Inc., 1330 Enclave Parkway, Suite 200, Houston, Texas 77077, United States for and on behalf of: Lloyd's Register Quality
Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 1 of 2
Certificate identity number: 10263832
Certificate Schedule
Location Activities
ISO 9001:2015
1111 Cedar Creek Road, Grafton, WI, 53024, Design and Manufacture of Specialized Hydrodynamic
United States Bearings including Tilting Pad Journal, Self-Equalizing
Thrust and Various Fixed Geometry Journal, Thrust
Bearings and Pedestals/Housings for the Manufacturers
of Motors, Turbines, Pumps, Compressors, Gears, Ships,
Locomotives and Drive Systems.
ISO 9001:2015
3300 East 8th Street, Columbus, NE, 68601, Manufacture of Specialized Hydrodynamic Bearings
United States including Tilting Pad Journal, Self-Equalizing Thrust and
Various Fixed Geometry Journal, Thrust Bearings and
Pedestals/Housings for the Manufacturers of Motors,
Turbines, Pumps, Compressors, Gears, Ships,
Locomotives and Drive Systems.
Lloyd's Register Group Limited, its affiliates and subsidiaries, including Lloyd's Register Quality Assurance Limited (LRQA), and their respective officers, employees or agents
are, individually and collectively, referred to in this clause as 'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss,
damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's
Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Issued by: Lloyd's Register Quality Assurance, Inc., 1330 Enclave Parkway, Suite 200, Houston, Texas 77077, United States for and on behalf of: Lloyd's Register Quality
Assurance Limited, 1 Trinity Park, Bickenhill Lane, Birmingham B37 7ES, United Kingdom
Page 2 of 2
