Scribd
Upload
70 views1 page

F2500C F2500C: Tracked Pavers Tracked Pavers

This document provides technical specifications for the F2500C tracked paver. It can pave roads and surfaces with a working width between 2.0 to 8.1 meters. The paver weighs 18.2 tons and can place pavement layers between 150mm to 320mm thick at a maximum theoretical rate of 650 tons per hour. It is powered by a Cummins diesel engine that produces 150 horsepower.

Uploaded by

Victorien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views1 page

F2500C F2500C: Tracked Pavers Tracked Pavers

This document provides technical specifications for the F2500C tracked paver. It can pave roads and surfaces with a working width between 2.0 to 8.1 meters. The paver weighs 18.2 tons and can place pavement layers between 150mm to 320mm thick at a maximum theoretical rate of 650 tons per hour. It is powered by a Cummins diesel engine that produces 150 horsepower.

Uploaded by

Victorien
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

F2500C

Tracked pavers

Technical data

Dimensions F2500C
Basic width 2.55 m
Working width, maximum 8.10 m
Working width, minimum 2.0 m
(with reducing shoe)
Masses
Weight 18.2 t
Capacity
Minimum paving level 150 mm
Placement thickness (max) 320 mm
Theoretical placement 650 t/ h
capacity
Material hopper
3
Capacity 6.5 m (15.0 t)
Dumping height, center 555 mm
Dumping height, outside 560 mm
Hopper width, internal 3,610 mm
Traction
Paving speed up to 30 m/ min
Transport speed 4 km/ h
Engine
Manufacturer/ Model Cummins QSB 6.7 - C173
Rated power, SAE J1995 110 kW (150 hp) @ 2200 rpm with
infinitely variable eco- mode
Electrical system 24 V
Fuel tank capacity 350 l
Undercarriage
Crawler length 2,900 mm
Crawler width 320 mm
Conveyor
Conveyor type Dual bar feeder
Auger
Auger diameter 380 mm

Find your local dealer at www.dynapac.com


We reserve the right to change specifications without notice. Photos and illustrations do not always show standard versions of machines.
The above information is a general description only, all informations are supplied without liability.

f2500c_en-20110105.154555.pdf 2011-01-05 15:45

You might also like