MY13 Parts Manual: Prairie Eco
Uploaded by
MarceloGonçalvesMY13 Parts Manual: Prairie Eco
Uploaded by
MarceloGonçalvesPrairie Eco
MY13 Parts Manual
For further information about any of the products
shown please visit - www.goldacres.com.au.
© Goldacres Trading 2011
This publication and all designs are copyright.
No part, products or designs may be reproduced
by any process except in accordance with the
Copyright act 1968.
All information in this parts manual is based on
the latest product information available at the
time of printing. The policy of Goldacres is one of
continuous improvement and as such, Goldacres
reserve the right to alter any specifications and
designs without notice and without incurring any
obligation regarding such changes.
No part of this manual may be reproduced without
written permission from Goldacres. All photographs
and technical information remain the property of
Goldacres.
Goldacres Trading Pty Ltd
3 Morang Crescent
Mitchell Park Vic 3355
Ph: 03 5342 6399
Fax: 03 5342 6308
Revision number: 1.0
04/04/2013
Part #: GA5071130
MY13 Prairie Eco Parts
Manual
Contents
CHASSIS5 Fill Manifold Sub Assembly 40
H Frame 5 4 Way Valve 41
Boom Rest - LH 6 Hopper Manifold 42
Boom Rest - RH 7 Fill Filter 42
Front Steps 8 Flow Control Valve Assembly 43
Hand Rails 9 Flow Control Valve 44
Hand rail gauge assembly 10 Flow Control Safety Valve 45
Pull11 Chemical Probe 46
PUMPS13 DCI - N/A 47
Pump - Zeta 260 PTO Shaft drive 13 DUAL PRODUCT - N/A 48
Pump - Zeta 260 Pump Breakdown 14
Pump - Zeta 260 MI Hydraulic Drive 15
INDUCTION HOPPER 49
Hydraulic hose assembly kit 16
Hydraulic drive conversion kit 17 Hopper Tank 49
Pressure Flow Compensator 18 Hopper Tank - Bottom 50
Hopper Frame 51
FLUSH TANK 19
FOAM MARKER TANK - N/A 53
400lt Belly Tank 19
400lt Belly Tank Frame 20
TRANSCAL - N/A 54
RIGHT HAND POD 21
MAIN TANK 55
Right Hand Pod - Internal Components 22
Airbag Compressor 23 6500 litre tank assembly 55
Airbag Compressor Parts 24 Tank Flush Elbow 56
Air Compressor Gauge 25 Tank Rinse Tee 57
Supermix Agitator 57
LEFT HAND POD 27 Venturi Filler 58
Prairie Eco Left Hand Pod 27 Hopper Tank Inlet 59
LH Pod Door 33 2” Tank Fill 59
Suction Filter 34 Remote Drain 60
Chem Probe 35 Sump Drain Tap 61
Fresh Water Filter Manifold 36 Tank Stops 61
Pressure Control Assembly 36 Tank Straps & Brackets 62
Fresh Water Fill Tap 37
Pressure Gauge 37
Non Return Valve - Tank Rinse 38
Non Return Valve - Fresh Water 39
WHEELS, AXLES & MUDGUARDS Pre Packaged Kits 100
63 ELECTRICS101
Air Bag Axle 63 Boom LED Lights 101
Mudguards65 Lights102
Wheel Speed Sensor 66 Electrical Components 102
Wheels67 Raven (AMP) Electrical Connectors 103
Hub - 90 Series 68 Electrical Connectors 105
Deutsch Electrical Connectors 107
BOOM CENTRE 70
Boom Lights Mount 110
Boom Centre Assembly 70 Console Mounting Kit 111
Cable Mount - Rear LH 72 Control Boxes 112
Cable Mount - Rear RH 73 Electrical Layout - Overview 113
Boom Valve Assembly 74
Boom Valves 75 SCHEMATICS116
Flow Meter Assembly 76 Fresh Water Delivery 116
Centre With Tilt Replacement Links 77 Pressure Schematic 117
Centre With Tilt Cylinders 77 Pneumatic Schematic 118
Paralift & Paralift Arms 78
Complete Centre & Paralift 79 DECALS120
Lower Limit Switch 80
Delta Link Locking Plate 81 HYDRAULICS129
Spring Yaw Kit 82
Boom Lower Solenoid 129
Hydraulic Yaw Kit 83
Load Sense Turbo Valve 130
Oversize Sign Mount 85
Quick Release Couplings 131
BOOM WING 86 Hydraulic Hoses 131
Hose ID Tags 132
Fence Line End Protector - Standard 86 Hydraulic O-Rings & Retaining Washers132
Fence Line End Protector - Quick Fit 87 Hydraulic Cylinder - Boom Lift 133
Boom Protector Assembly - Outer 88 Hydraulic Cylinder - Wing Tilt 133
Boom Protector Assembly - Inner 88 Hydraulic Cylinder - Yaw 134
Cable Drum 89 Hydraulic Cylinder - Boom Fold RH 135
Boom Fold Adjuster 90 Hydraulic Cylinder - Boom Fold LH 135
Boom Cables 91 Hydraulic Schematic 136
Boom Cable Spring - Suit 30m 91
Boom Cable Springs - Suit 33&36m 92 FILTRATION & HOSE 138
Lower Bearing Pivot 92
3/4 BSP Filter with 200 mesh screen 138
Upper Bearing Pivot 93
Pressure Filter Assembly 139
Steel Inner Wings 93
2” Fill Filter with 120 mesh screen 140
Aluminium Outer Wings 94
In Line Boom Filter 141
Aluminium Break Away Tip 94
2” Suction Filter 142
Three Dimensional Breakaway 95
Air Filter 142
Boom Line Plumbing 97
Hose Clamps 143
Manual Fence Line Nozzle 98
Cable Ties 143
Solenoid Operated Fence Line Nozzle 99
Hoses144
Adjustable Nozzle Brackets 100
OPTIONAL ACCESSORIES 145
Enviro Coupling & Hose 145
PH6 Pump Mounting Kit 146
Fill Flow Meter 147
Fill Flow Meter Monitor 147
3” Fill Pump 148
3” Fill Pump Outlet 149
3” Fill Pump inlet 150
Chapter 1
CHASSIS
H Frame 1 2 3 4 5
ITEM NO. PART NUMBER
6 7
DESCRIPTION
1 GA4654181 H-Frame suit praire 400
A 2011
2 GA4658161 Ladder suit 2013 Pra
3 GA4905660 Boom Rest with Roller Su
RH
4 GA4905655 Boom Rest with Roller Su
LH
5 GA5075120 Heavy Duty Exaust C
36mm
6 GA5000577 M12 SS HD Washe
4 7 GA5000575 M12 Spring washe
13 8 GA5000307 M12x30 bolt
B
9 GA5001043 M16 SS washer
12 10 GA5000939 M16x60 bolt
2 11 GA5001029 M16 Nyloc nut
12 GA5005259 Air Filter
13 HB100-075 1" male thread x 3/4"
C 3
10
D
E 11
REV NO CHANGE
6
7 GOLDACR
TITLE:
8
F DATE CREATED:
DWG NO.
ITEM NO. PART NUMBER DESCRIPTION UNLESS OTHERWISE SPECIFIED
DEBUR ALL EDGES
26/03/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Name
QTY. Prairie Eco H-Frame MY13
DATE EDITED: MATERIAL:
1 1 GA4654181 2 H-Frame suit praire 4000-6500L 2011
3 4
19/04/2013
Matt 1
DO NOT SCALE DRAWING SCALE:1:15
2 GA4658161 Ladder suit 2013 Prairie 1
3 GA4905660 Boom Rest with Roller Sub-assem RH 1
4 GA4905655 Boom Rest with Roller Sub-assem LH 1
5 GA5075120 Heavy Duty Exaust Clamp 36mm 2
6 GA5000577 M12 SS HD Washer 2
7 GA5000575 M12 Spring washer SS 2
8 GA5000307 M12x30 bolt 2
9 GA5001043 M16 SS washer 16
10 GA5000939 M16x60 bolt 8
11 GA5001029 M16 Nyloc nut 8
12 GA5005259 Air Filter 1
13 HB100-075 1" male thread x 3/4" barb 1
14 GA4659850 6500L Eco Chassis (not shown) 1
Chapter 1 - Chassis - 5
1 GA5070700 Boom Rest Roller Prairie 1
A 2 GA5067885 Pin cover - plastic 1
3 GA5017659 Washer 1" Flat HD ZP 4
4 MACH0152 12mm Bolt Bush suit para lift pins 1
5 GA5000307 M12x30 GR12.9 ZP unbrako 1
6 GA4658745 Pin - suit boom rest roller 1
7 GA5052345 75 x 75 mm square tube insert 1
black
8 GA5066630 Plastic Wear Strip Polystone 1
9 GA5051230 M5x16mm FHCS SS 5
10 GA4659675 Boom Rest Prairie LH 4000, 5000, 1
Boom
B
11 Rest - LH
GA4572135
6500
Paralift spacer bush 1
9
D
10
11
6
4
5
2
E
REV
1
3
TITLE:
Boo
F DATE CREATED:
UNLESS OTHERWISE SPECIFIED 28/11/2012 DWG
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4
ITEM NO. PART NUMBER DESCRIPTION DEBUR ALL EDGES
DATE EDITED:
QTY. MATERIAL:
19/04/2013
1 1
GA5070700 2
Boom Rest Roller Prairie
3 4 Luke 1 DO NOT SCALE DRAWING SCA
2 GA5067885 Pin cover - plastic 1
3 GA5017659 Washer 1" Flat HD ZP 4
4 MACH0152 12mm Bolt Bush suit para lift pins 1
5 GA5000307 M12x30 GR12.9 ZP unbrako 1
6 GA4658745 Pin - suit boom rest roller 1
7 GA5052345 75 x 75 mm square tube insert black 1
8 GA5066630 Plastic Wear Strip Polystone 1
9 GA5051230 M5x16mm FHCS SS 5
10 GA4659675 Boom Rest Prairie LH 4000, 5000, 6500 1
11 GA4572135 Paralift spacer bush 1
6 - Prairie Eco Parts Manual - Rev 1.0
1 2 3 4 5 6 7
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4659670 Boom Rest Prairie RH 4000, 5000, 1
A 6500
2 GA5067885 Pin cover - plastic 1
3 GA5070700 Boom Rest Roller Prairie 1
4 GA4658745 Pin - suit boom rest roller 1
5 MACH0152 12mm Bolt Bush suit para lift pins 1
6 GA5000307 M12x30 GR12.9 ZP unbrako 1
7 GA5017659 Washer 1" Flat HD ZP 4
8 GA5066630 Plastic Wear Strip Polystone 1
Boom Rest - RH
9 GA5051230 M5x16mm FHCS SS
75 x 75 mm square tube insert
5
B
10 GA5052345 black 1
11 GA4572135 Paralift spacer bush 1
10
C
8
D
11
4
5 6
2
E
1
3
7
REV NO CHAN
GO
TITLE:
Boom Rest Rig
F
ITEM NO. PART NUMBER DESCRIPTION QTY.
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
28/11/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DWG NO.
DEBUR ALL EDGES GA4904735-R
1 GA4659670 Boom Rest Prairie RH 4000, 5000, 6500 DATE EDITED:
19/04/2013
1 MATERIAL:
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5
2 GA5067885 Pin cover - plastic 1
3 GA5070700 Boom Rest Roller Prairie 1
4 GA4658745 Pin - suit boom rest roller 1
5 MACH0152 12mm Bolt Bush suit para lift pins 1
6 GA5000307 M12x30 GR12.9 ZP unbrako 1
7 GA5017659 Washer 1" Flat HD ZP 4
8 GA5066630 Plastic Wear Strip Polystone 1
9 GA5051230 M5x16mm FHCS SS 5
10 GA5052345 75 x 75 mm square tube insert black 1
11 GA4572135 Paralift spacer bush 1
Chapter 1 - Chassis - 7
2
Front Steps
3 4 5 6 7 8
R DESCRIPTION QTY.
Lower Ladder Prairie, Special 1
2013 A
Upper catch mounting plate LH 1
female rubber door holder 1
(black)
Latch plate suit prairie EF narrow 1
step
Male rubber door holder 1
M10x20 Unbrako 2
Washer 10mm SS Heavy duty 14
Washer flat SS 10mm 2
M10 Nyloc Nut 8 B
Bolt Gr8.8 M10x30 4 10 7
Bolt M10x40 GR10.9 ZP 2
M6x20 bolt 1
M6x30 bolt 1 14 15
M6 SS Washer 2
M6 Nyloc Nut SS 2
3
7 C
12 2 9
6 7 9
D
1 11 7 8 7 9
9 7 7 10 4 14 15
REV NO CHANGE DATE ECN NO.
13 5 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 26/03/2013 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Prairie Eco front steps MY13 A3
DEBUR ALL EDGES Name
ITEM NO. PART NUMBER DESCRIPTION
DATE EDITED:
26/03/2013
MATERIAL:
QTY.
2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5 SHEET 1 OF 1
1 GA4659690 Lower Ladder Prairie, Special 2013 1
2 F70684A Upper catch mounting plate LH 1
3 GA5008629 female rubber door holder (black) 1
4 GA4522617 Latch plate suit prairie EF narrow step 1
5 GA5011607 Male rubber door holder 1
6 GA5011153 M10x20 Unbrako 2
7 GA5000117 Washer 10mm SS Heavy duty 14
8 GA5000115 Washer flat SS 10mm 2
9 GA5000141 M10 Nyloc Nut 8
10 GA5065455 Bolt Gr8.8 M10x30 4
11 GA5006071 Bolt M10x40 GR10.9 ZP 2
12 GA5004065 M6x20 bolt 1
13 GA5004079 M6x30 bolt 1
14 GA5004437 M6 SS Washer 2
15 GA5048115 M6 Nyloc Nut SS 2
8 - Prairie Eco Parts Manual - Rev 1.0
Hand Rails
1 2 3 4 5 6
ITEM NO. PART NUMBER
1 GA4659660
A 2 GA4659855
3 GA5000295
4 GA5000311
5 GA5000575
6 GA5000577
7 GA5012461
2 4 6 6 7
4 6 6 7 7
D 6
REV N
6 5 3
TITLE:
F DATE CREATED:
UNLESS OTHERWISE SPECIFIED 26/03/2013 DWG N
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Name
Prair
DATE EDITED: MATERIAL:
26/03/2013
1 2 3 4 Matt DO NOT SCALE DRAWING SCA
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4659660 LH side hand rail 1
2 GA4659855 Handrail Prairie Eco 6500L 1
3 GA5000295 Set screw HT M12 x 25 2
4 GA5000311 M12x35 Bolt 6
5 GA5000575 M12 Spring washer SS 2
6 GA5000577 M12 SS HD Washer 14
7 GA5012461 M12 Nyloc nut Z/P 6
Chapter 1 - Chassis - 9
1 2 3 4 5 6
ITEM NO. PART NUMBER
1 GA4948460
A
Hand rail gauge assembly 2
3
GA5000577
GA5048300
4 GA5018323
5 GA5016233
1
B
2
C
5 3 4 5
ITEM NO. PART NUMBER DESCRIPTION QTY.
T
1 GA4948460 Pressure gauge large face 160PSI 1
2 GA5000577 M12 SS HD Washer 2
F DATE CREATED:
UNLESS OTHERWISE SPECIFIED D
3 GA5048300 1/4 Female brass Tee 1 27/03/2013
DIMENSIONS ARE IN MILLIMETERSDRAWN:
P
DEBUR ALL EDGES Name
4 GA5018323 1/4" M-F Ball Valve (SS) DATE EDITED:
27/03/2013 1 MATERIAL:
1 2 3 4 Matt DO NOT SCALE DRAWING
5 GA5016233 Elbow - Swivel 6mm x 1/4" 2
10 - Prairie Eco Parts Manual - Rev 1.0
4 5 6 7 8
6500
QTY.
1
Pull
A
tank 1 2
08 1
bolt 1
te 1 29 16 16 28
andle 1
ong 1
10 8 9 23
pull 1
king 1 B
27
1
duty 4
24 25 17 26
2 13 11 11 12
2
gled 1
ush) 1
20 6
sher 12
15
6 14 7 C
4 21
4 22
30
1
1 1/2" 1 31
m OD 1 32 19 5 4
2
2 15 18 17 16 3
in 2 D
2 Chain and rings that retain the jack bolt are not shown
ning 1 2x GA5002077 Key ring
1x Chain (GA5001491) 2mm x 20 (cut 250mm)
4 Saftey tow Chain not listed
4 2x 1m GA5065030
ed 1 Note: GA4905650 - Chain safety complete kit MY13
1
hort 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4659545 Pull Prairie 4000, 5000 and 6500 MY13 1
2 GA4901125-EF Tank, 400 flush water belly tank with frame. (refer to chapter 3 1
REV NO CHANGE DATE ECN NO.
for futher information on the flush tank) 1-3 MORANG CR
3 GA4656436 Jack Prairie advance 08 GOLDACRES MITCHELL 1
PARK 3352
PH: 03 53426399
FAX: 03 53426308
4 GA4656437 Jack Prairie advance 08 T bolt TITLE: 1
5 GA4522297 Prairie EF jack wear plate 1
6 GA5066700 Handle 8/02/2011
UNLESS OTHERWISE SPECIFIED
bar grip suit jack handle
DATE CREATED:
DWG NO.black 1
DIMENSIONS ARE IN MILLIMETERS
Evo pull with parts 2013 A3
7 GA5009639 Grease LukeNipple 1/4" UNF Long 1
DRAWN:
DEBUR ALL EDGES M
DATE EDITED: MATERIAL:
5/09/2012
4 8 GA4657665
Matt Hose support arm suit EF pull
DO NOT SCALE DRAWING SCALE:1:22 1
SHEET 1 OF 1
9 GA4522926 EF pull hose support backing plate 1
10 GA5002911 35x35 tube insert 1
11 GA5000117 Washer 10mm SS Heavy duty 4
12 GA5011163 M10x70 bolt ZP G8.8 2
13 GA5000141 M10 Nyloc Nut 2
14 GA4659555 Welded towing eye - angled MY13 1
15 GA5016243 Swivel Tow Eye (minus bush) 1
Continued over page
Chapter 1 - Chassis - 11
Pull
ITEM NO. PART NUMBER DESCRIPTION QTY.
16 GA5001739 M20 Heavy Duty Flat Washer 12
17 GA5001721 M20 Spring Washer 6
18 GA5011333 M20x60 bolt 4
19 GA5000667 Bow Shackle 4
20 GA5051385 M8 x 90mm Split Pin 1
21 GA4582455 Spacer Bush Tow Eye suit 1 1/2" pin (Urethane) 1
22 GA5075075 Towing eye bush ID 35mm OD 50mm 1
23 GA5061070 Spacer Pull EF 2
24 PCH-019MACH Large Chassis Pin 2
25 L073A Washer suit drawbar pin 2
26 GA5011319 Bolt M20 x 50 ZP 2
27 GA4522385 Prairie EF Belly tank retaining strap 1
28 GA5048355 M20x100 bolt 4
29 GA5048125 M20 Nyloc nut 4
30 GA5001009 M16 washer Zink coated 1
31 GA5001029 M16 Nyloc nut 1
32 GA5012203 Grease Nipple 1/4" UNF Short 1
12 - Prairie Eco Parts Manual - Rev 1.0
Chapter 2
PUMPS
3 4 5 6 7 8
ON QTY.
TO TS 2C
t rear of 2C
1Pump - Zeta 260 PTO Shaft drive
1 A
er 1
eavy duty 11
pring S/S 3
ako 3
de angle 1
m HD 2
her SS 2 10 9 8
lt 2 B
0x30 4 2
Nut 4
1
ailable
C
7 6 5 4 3 11 4 4 12
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5054505 Pump Zeta 260 PTO TS 2C 1
2 GA5013499 PTO protector to suit rear of 2C pumps 1
3 7650-7202121902 PTO Cover 1
4 GA5000117 Washer 10mm SS Heavy duty 11
5 GA5000137 Washer 10mm Spring S/S 3
6 M10x25 Unbrako M10x25 Unbrako REV NO CHANGE DATE 3 ECN NO.
1-3 MORANG CR
GA5013511 PTO drive shaft wide angle 1.05m
7
GA5060830 PTO drive shaft narrow angle
GOLDACRES MITCHELL PARK 3352
1
PH: 03 53426399
FAX: 03 53426308
TITLE:
7650-7202121913 Standard shaft cover Pump , Diaphragm type, Zeta 260 PTO Shaft drive. NOTE: W2200-OV/1-510
8 GA5004883 Washer 8mm HD
DATE CREATED:
2
UNLESS OTHERWISE SPECIFIED 20/11/2009 DWG NO.
9 GA5004919 DIMENSIONS AREM8
DEBUR ALL EDGES
Spring Luke
IN MILLIMETERS washer
DRAWN:
M
SS GA4900675-PAEF 2 A3
MATERIAL:
10 GA500471117/08/2012 M8x25 bolt 2
DATE EDITED:
3 4 Matt DO NOT SCALE DRAWING SCALE:1:10 SHEET 1 OF 1
11 GA5065455 Bolt Gr8.8 M10x30 4
12 GA5000141 M10 Nyloc Nut 4
Chapter 2 - Pumps - 13
Pump - Zeta 260 Pump Breakdown
14 - Prairie Eco Parts Manual - Rev 1.0
4 5 6 7 8
1
QTY.
1
Pump - Zeta 260 MI Hydraulic Drive
rev 1 A
m 2
S 2
2
pump 1
1
1
2
1
10 9 9 B
duty 8
4
4
aulic 1
MY10
0171293
5 4 3 2 12 11 11 13
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5054500 Pump Zeta 260 MI-1 1
2 GA5047515 motor hydraulic 80cc/rev
REV NO CHANGE DATE
1
ECN NO.
3 GA5000587 Washer HD ZP 12mm 1-3 MORANG 2CR
4 GA5000575 M12 Spring washer SS GOLDACRES PH: MITCHELL PARK 3352
2
03 53426399
FAX: 03 53426308
5 GA5000321 M12x40 unbrako TITLE:
2
Pump-Zeta 260 MI (RO250 MI) suit Special
6 pump cover-RO250 Safety cover over RO 250 pump 1
7 1170171293
UNLESS OTHERWISE SPECIFIEDPump RPM Sensor 1 A3
DATE CREATED:
20/11/2009 DWG NO.
DIMENSIONS ARE IN MILLIMETERS
DEBUR ALL EDGES
DRAWN:
Luke M
GA4904685
8 GA5016169
DATE EDITED:
20/08/2012
Super Magnet
MATERIAL:
1
4 Coen
9 GA5011499 M8 Hex Nut ZP 2
DO NOT SCALE DRAWING SCALE:1:8 SHEET 1 OF 1
10 GA5048655 M8x40 bolt 1
11 GA5000117 Washer 10mm SS Heavy duty 8
12 GA5065455 Bolt Gr8.8 M10x30 4
13 GA5000141 M10 Nyloc Nut 4
14 GA5067186 Hose assembly kit hydraulic drive suit hose support MY10 1
Chapter 2 - Pumps - 15
Hydraulic hose assembly kit
GA5067185-EF Hydraulic Drive Kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018221 1/2" Needle Valve 1
2 S167-080808 TEE 1/2 BSPT M x M F 2
3 GA4922110 Short hydraulic pump hose 1
4 GA4922115 Short hydraulic pump hose 1
5 GA4922105 long hyd pump hose 2
GA5067186-03 Hydraulic Line for Spray Pump
1
T226-1212 Coupling 3/4" hose to 90 deg short bend 3/4" BSPP swivel 1
female
Fitting
6 S75-08-1 1/2" BSPP x 1/2" BSPT Hydraulic
2
7 36B-08
1/2"
BSPP Retaining Ring 2
8 RO-BP08 1/2" BSPP O-Ring 2
9 R81-08M Quick release coupling male 1/2" 2
GA5052365 Green boot to suit hydraulic end 2
16 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6 7 8
CRIPTION QTY.
aulic 80cc/rev 1
draulic motor to 1
A
DOR
suit UDOR pump 1
apter
pto converter with Hydraulic
1
drive conversion kit
b screws
5 Unbrako 3
WASHER 4
oc nut Z/P 2
HT ZP Bolt 2
nsor cut down to 1 B
uit kit
Magnet 1
bly kit hydraulic 1
e support MY10
C
11
10
2
7
5
4
3
1
6
8
REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
ITEM NO. PART NUMBER DESCRIPTION TITLE:
QTY.
Pump, hydraulic drive to suit diaphragm pump inc shaft speed sensor
1 GA5047515 motor hydraulic 80cc/rev 1
DATE CREATED:
DWG NO.
2 F700416600 - adaptor
DIMENSIONS ARE Adaptor
IN MILLIMETERS hydraulic motor to UDOR
UNLESS OTHERWISE SPECIFIED 1/06/2011
DRAWN:
Zeta 260 - PTO to Hydraulic Drive
1 A3
DEBUR ALL EDGES Luke M
3 GA4552100 plate
DATE EDITED:
20/08/2012 spacer suit
MATERIAL:
UDOR pump adapter 1
3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5 SHEET 1 OF 1
4 F700416600 - socket Hyd motor to pto converter with 2xgrub screws 1
5 M10x25 Unbrako M10x25 Unbrako 3
6 GA5000587 M12 WASHER 4
7 GA5012461 M12 Nyloc nut Z/P 2
8 GA5000347 M12x70 HT ZP Bolt 2
9 1170159929 - cutdown Pump RPM sensor cut down to suit kit 1
10 GA5016169 Super Magnet 1
11 GA5067186 Hose assembly kit hydraulic drive suit hose support MY10 1
For machines fitted with 70 series pump RPM monitors:
ITEM NO. PART NUMBER DESCRIPTION QTY.
90-02328 70 series RPM monitor & speed sensor - Complete 1
16-40004 Teejet speed sensor 1
Chapter 2 - Pumps - 17
Pressure Flow Compensator
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5049425 Manual flow control 1
2 S75-0808 1/2" BSPP x 1/2" BSPT Hydraulic Fitting w/ O-Ring @ Washer 3
3 GA5007060 Check Valve (45 LPM) 1/2 BSPP zero bar 1
4 GA5049430 SHCS M8 x 70 ZP GR12.9 4
18 - Prairie Eco Parts Manual - Rev 1.0
Chapter 3
FLUSH TANK
QTY.
400lt Belly Tank
4 5 6 7 8
elly 1
eather 1 A
1/2 2 2
thread 2
115 1 5
to 1 1/4" 1
DCI only
-1/4" 1
ow 1 1/4 1 1 4
to ¾” 1
ale TEE 1 11
B
k-90 Deg 1
660mm 1 Tank Fill
12
10
D
4
8 7 6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018367 Tank 400L underbelly 1
2 352022 Small Lid D255 c/w breather 1
3 HB050-90 Hose Barb Elbow 1/2 2
4 HB075-90 hose barb elbow 3/4" threadREV NO 3/4" barb
CHANGE DATE ECN2NO.
1-3 MORANG CR
5 300110 Basket Filter D.204x115 1
6 RN150125 Reducing nipple 1 1/2" to 1 1/4"
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
1
FAX: 03 53426308
TITLE:
7 GA5017361 Non return valve 1-1/4" Preassembled 400L Belly Tank 1
8 HB125-90 90' Poly Hose Barb Elbow 1 1/4
DATE CREATED:
1
UNLESS OTHERWISE SPECIFIED 9/02/2011 DWG NO.
9 RB150075
DIMENSIONS ARE
DEBUR ALL EDGES
IN Reducing
MILLIMETERS
DRAWN:
Luke M
bush 1 ½” toGA4903087
¾” 1 A3
10 GA5018315 Ball Valve Male / Female TEE 3/4" 1
DATE EDITED: MATERIAL:
5/09/2012
4 Coen DO NOT SCALE DRAWING SCALE:1:12 SHEET 2 OF 2
11 HB100-075-90 1"MPT X 3/4"Hose Shank-90 Deg 1
12 HOS12SIGHT 12mm sight tube - cut 660mm long 1
Chapter 3 - Flush Tank - 19
4 5 6 7 8
QTY.
1
400lt Belly Tank Frame
2 A
4
4
4
12
6
6
1
4
B
8
6
7 D
5 4 3
10
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4654320 Rinse tank frame 1
2 F70681A Hose retaining strap for belly tank 2
3 GA5011405 M6x35 bolt 4
4 GA5004437 M6 SS Washer 4
5 GA4552075 crush tube 10.2x15x15 REV NO CHANGE
4DATE ECN NO.
6 GA5000587 M12 WASHER 121-3 MORANG CR
7 GA5000311 M12x35 Bolt GOLDACRES MITCHELL PARK 3352
6 PH: 03 53426399
8 GA5012461 M12 Nyloc nut Z/P 6 FAX: 03 53426308
TITLE:
9 GA4903087 Preassembled 400L Belly TankTank, 400 flush water belly tank with1frame.
10 GA5003733 End Cap, 50x25 RHS 4
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 8/06/2004 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4901125-EF A3
DEBUR ALL EDGES Luke M
DATE EDITED: MATERIAL:
6/07/2012
4 Matt DO NOT SCALE DRAWING SCALE:1:14 SHEET 1 OF 1
20 - Prairie Eco Parts Manual - Rev 1.0
Chapter 4
RIGHT HAND POD
4 5 6 7 8
QTY.
pressor 1
A
pressor 1 5
plastic 1
6955
4 4
marker 2 3
2
4
g ZP 4
B
4
2
C
1 7
8
9
D
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4657695 Special EF Airbag Compressor Mount 1
2 GA4903147 Pre Assm Air Bag Compressor Box 2010 1
3 F70254A Top retaining plate for plastic foam/air box GA5066955 1
REV NO CHANGE DATE ECN NO.
4 GA5004883 Washer 8mm HD 4 CR
1-3 MORANG
M8x210 Bolt for foam marker box GOLDACRES PH: 03 53426399
MITCHELL PARK 3352
5 MACH0041 2
FAX: 03 53426308
6 GA5004917 M8 Nyloc Nut TITLE: 2
Pod RHS Specia Suit Airbag With No Foam
7 GA5001043 M16 SS washer 4
8 GA5000961
UNLESS OTHERWISEWasher
SPECIFIED 16mm
DATE CREATED:
2/02/2012
Spring ZP DWG NO. 4
DIMENSIONS ARE IN MILLIMETERS
DRAWN:
GA4903146 A3
9 GA5000903
DEBUR ALL EDGES M16x25 bolt
DATE EDITED:
Luke M
MATERIAL:
4
27/03/2013
4 Matt DO NOT SCALE DRAWING SCALE:1:5 SHEET 1 OF 1
Chapter 4 - Right Hand Pod - 21
Right Hand Pod - Internal Components
4 5 6 7 8
QTY.
ottom 1
Lid 1
only sub 1
mp 2
ox gauge 1
ecial
d soc SS 2
2 2
er box 1
2 15
Brass 1
k-90 Deg 1 16
e 2 3
Tee 1 4
1/4 1
Red cut 1 12
ss. T/S Air 1
14 8
1
7
uit AS40 1 13
6
12
nce Cabinet)
10
9
1
17
11
9 18 Loom plug seal
ITEM NO. PART NUMBER DESCRIPTION REV NO CHANGE QTY. DATE ECN
1 GA5066955 Foam Marker Box Bottom 1 1-3 MORANG
2 GA5066955-2 Foam Marker Box Lid GOLDACRES 1
MITCHELL PAR
PH: 03 5342639
FAX: 03 534263
3 GA4906150 Air bag compressor only sub assembly TITLE: 1
4 GA5000469 1/2" SS hose clamp Pre Assm Air Bag Compressor
2 Box 2010
5 GA4906170 Air bag compressor box gauge sub assem suit special
DATE CREATED:
1
UNLESS OTHERWISE SPECIFIED DWG NO.
6 GA5003581 DIMENSIONS
M5x20mm Button 1/02/2012
ARE IN MILLIMETERS head soc SS
DRAWN:
GA4903147 2
DEBUR ALL EDGES JRokebrand
7 GA5003983 27/03/2013
M5 washer ss
DATE EDITED: MATERIAL:
2
4 Matt
8 GA4572130 Rod suit foam marker box DO NOT SCALE DRAWING SCALE:1:5
1 SHEET 1 OF 1
Continued over page
22 - Prairie Eco Parts Manual - Rev 1.0
Right Hand Pod - Internal Components
ITEM NO. PART NUMBER DESCRIPTION QTY.
9 GA5000587 M12 WASHER 2
10 GA5066940 1/4" BSPP Socket Brass 1
11 HB100-075-90 1"MPT X 3/4"Hose Shank-90 Deg 1
12 GA5050285 1/4" Brass Nipple 2
13 GA5048300 1/4 Female brass Tee 1
14 GA5049290 Elbow brass 3/8 x 1/4 1
15 GA5051025 Multi purpose 3/8" ID Red cut 220mm 1
16 GA5016221 Switch differential Press. T/S Air Bag 1
3 4 5 6 7 8
DESCRIPTION 17 2052040
QTY. Back Nut 1" 1
Compressor suit airbag 18
319 1
GA5065820 O-Ring 38x3 FPM 75 suit AS40 1
Elbow Brass 3/8 x 3/8 1 A
ipple reducing Brass 1/8"x3/8" 1
Elbow brass 3/8 x 1/4 1
Airbag Compressor
One way valve 3/8 york 1
5
B
4
C
GA4906150 Airbag Compressor
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018809 Compressor suit airbag 319 1
2 GA5070730 Elbow Brass 3/8 x 3/8 1
3 GA5020690 Nipple reducing Brass 1/8"x3/8" REV NO CHANGE 1 DATE ECN NO.
1-3 MORANG CR
4 GA5049290 Elbow brass 3/8 x 1/4 1
5 GA5020010 One way valve 3/8 york
GOLDACRES
1
MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
Airbag Compressor ASM MY13
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 27/07/2012 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4906150 A3
DEBUR ALL EDGES Luke M
DATE EDITED: MATERIAL:
7/09/2012
3 4 Matt DO NOT SCALE DRAWING SCALE:1:2 SHEET 1 OF 1
Chapter 4 - Right Hand Pod - 23
Airbag Compressor Parts
GA5018809 Airbag Compressor
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 Connecting Rod & Eccentric Assembly 1
2 O Ring - Sleeve 1
3 Head Assembly 1
4 Head 1
5 Valve Restraint 1
6 Valve Flapper - Exhaust 1
7 Valve Flapper - Intake 1
8 Valve Shim 1
9 Head Plate 1
10 O Ring - Valve Flapper 1
11 Screw - Valve Flapper 2
12 Screw - Head 4
13 O Ring Gasket 1
14 Bracket 12V 1
14 Bracket 24V
15 Bracket 1
16 O Ring Gasket - Housing 1
17 Screw - Bracket 5
18 Nut - Bracket 2
19 Gasket - Bracket 1
24 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6
DESCRIPTION QTY.
1/4 Female brass Tee 1
1/4" 90 Deg Elbow 1
Air Compressor Gauge
0404 BSPTM BSPPFS 90' Elbow 1 A
Small Face Gauge 160 psi 1
1/4" Brass Nipple 1
5
1
2
C
GA4906170 Air Compressor Gauge
ITEM NO. PART NUMBER DESCRIPTION QTY.
1-3 MORANG CR
1 GA5048300 1/4 Female brass Tee GOLDACRES MITCHELL PARK 3352 1
PH: 03 53426399
2 S49-0404 1/4" 90 Deg Elbow FAX: 03 53426308 1
TITLE:
3 S82-0404
UNLESS OTHERWISE SPECIFIED: DATE CREATED: 0404 BSPTMAirBSPPFS 90' Elbow
bag compressor box gauge sub assem suit special 1
DIMENSIONS ARE IN MILLIMETERS 1/08/2012
4
DEBUR ALL EDGES GA4948470 DRAWN: Small Face Gauge
DWG NO: 160 psi 1
APPL DATE
DATE EDITED: UNTOL. DIMENSIONS Luke M GA4906170 A4
Matt
5
27/03/2013 GA5050285
OPEN DIM ± 0.20
ONE DEC. PL. ± 0.10
MATERIAL:
1/4" Brass Nipple 1
TWO DEC. PL. ± 0.05
ANGULAR ± 0°30' DO NOT SCALE DRAWING SCALE:1:2 SHEET 1 OF 1
Chapter 4 - Right Hand Pod - 25
26 - Prairie Eco Parts Manual - Rev 1.0
Chapter 5
5 6 7 8
DESCRIPTION LEFT HAND POD
QTY. ITEM
NO. PART NUMBER DESCRIPTION QTY.
ate suit Altek ball valves 2" Fill filter with 50 mesh screen
2011 1 70 GA5001333 viton 1 A
gauge assem EVO 2011 1 71 SL200-45 2" Street Elbow 45 degree 1
rn valve assem Evo 2011 1 72 CPLG200 2 poly pipe coupling 1
rn valve assem Evo 2011 1 Narva Water Proof Switch Cover
73 GA5012175 B/P 1
e rubber door holder
(black) Prairie Eco 1Left Hand Pod
74 GA5075250 On/On Switch 10A DPDT 1
asher 8mm SS HD 23
75 GA4903148-
05
Pod cover door assem EVO
2011 1
M8x80 Bolt 4
M8x16 bolt ZP 7
B
M8x120 Bolt 4
M8x20 bolt 5
for Altek Rotary valve 4
BHCS S'Steel M6x20 1
ome plug 12mm 3
ater tank 30L black with
soap holder 1
and wash Tank mount
bracket 2
C
nd wash bottle tap 1
M6 Nyloc Nut SS 1
Nut nyloc M6 1
Water Filter Manifold 1
aight Hose Barb 2" 1
se Barb Elbow 1/2 1
in hose tail AS40/25 1
Safety pin AS40 1
D
nd cap Plug AS40 2
Valve - Prairie LH Pod 1
Connections - Prairie LH
Pod 1
in hose tail AS40/20 1
e hose tail AS24/15/90 1
AS24 Safety Pin 1
n hose tail AS40/25/90
degree 1
ound black inserts 2.5 -
4.5mm wall 2
unt plate suit 2011 pod 1 REV NO CHANGE DATE ECN NO.
" Flat washer large 3 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
Evo Left Hand pod 2011
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 19/05/2004 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Prairie Eco Left Hand Pod A3
DEBUR ALL EDGES Luke
DATE EDITED: MATERIAL:
29/04/2013
Matt DO NOT SCALE DRAWING SCALE:1:12 SHEET 1 OF 4
Continued over page
Chapter 5 - Left Hand Pod - 27
Prairie Eco Left Hand Pod
1 2 3 4 5 6 7
25 48
24
33
23 45
42
23
41
54
61
47 38
42
7
49
66 73
42
74 43
62 44
34
65
64
39
36
35
58
59
40
44 10 42
REV NO CHANGE
7
42 GOLDA
TITLE:
Evo Left Hand pod 2011
60
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 19/05/2004 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Luke
Prairie Eco Left Hand Pod
DATE EDITED: MATERIAL:
29/04/2013
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:5
Continued over page
28 - Prairie Eco Parts Manual - Rev 1.0
1 2 3 4 5 6 7 8
A A
21
30 53 52 50 11 9 9 8
28
29
23 37
26 24
B B
67 51
Prairie Eco Left Hand Pod
C C
11 10 9
4 3
D D
22
27
31
18 6 5 20 9 11
28
REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
MITCHELL PARK 3352
Continued over page
Chapter 5 - Left Hand Pod - 29
GOLDACRES PH: 03 53426399
FAX: 03 53426308
TITLE:
Evo Left Hand pod 2011
F DATE CREATED:
UNLESS OTHERWISE SPECIFIED 19/05/2004 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN: A3
DEBUR ALL EDGES Luke
Prairie Eco Left Hand Pod
DATE EDITED: MATERIAL:
29/04/2013
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5 SHEET 3 OF 4
Prairie Eco Left Hand Pod
1 2 3 4 5 6 7
46 2
1
9
46
10 17 16 15
69 9 7
7
9 19
68 32
55 14 12 12 13
57
70 72 71 56 REV NO CHA
G
TITLE:
Evo Left Han
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 19/05/2004 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Luke
Prairie Eco Le
DATE EDITED: MATERIAL:
29/04/2013
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5
Continued over page
30 - Prairie Eco Parts Manual - Rev 1.0
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4658155 LHS pod frame suit 2011 model EF 1
2 GA4903148-06 Suction filter sub assem Evo 2011 1
3 GA4903148-07 Chem probe Evo 2011 1
4 GA4523755 Prairie suction pod frame side cover plate 1
5 200S Female 1/4 bspp female air coupling 1
6 GA5000587 M12 WASHER 2
7 GA5004917 M8 Nyloc Nut 14
8 GA5052590 Nut M8 Nyloc S/S 316 8
9 GA5004883 Washer 8mm HD 31
10 GA5004919 M8 Spring washer SS 15
11 GA5011473 M8 x 25 BHCS SS 15
12 GA5000117 Washer 10mm SS Heavy duty 8
13 GA5065455 Bolt Gr8.8 M10x30 4
14 GA5000141 M10 Nyloc Nut 4
15 GA5001009 M16 washer Zink coated 8
16 GA5000961 Washer 16mm Spring ZP 8
17 GA5000903 M16x25 bolt 8
18 S27-0404 1/4" x 1/4" Steel Nipple 1
19 GA5006689 Exhaust clamp - 66mm C12 3
20 GA5054755 Hole cover 46mm dia Black 3
21 GA5018373 RH pod Blank suit Evo 2011 1
22 3560602 Lid hinged black 1
23 GA5004437 M6 SS Washer 18
24 GA5004447 M6 Spring washer SS 17
25 GA5011425 M6 x 35mm Cap Screw 9
26 GA5004055 BOLT M6 x 20 SHCS ZP 8
27 F70651A FULL FACE COVER PLATE 1
28 GA5004437 Screw 12G x 1 XR STS Pan SS 12
29 GA4534185 Locker Bottom Lip 1
30 GA4534190 Locker Middle Shelf 1
31 GA5014819 10G x 25mm CS Self tapping screw 8
32 GA5020855 Nut M6 x 25 Rawl Nut 9
33 GA4658165 LHS pod door skin 2011 1
34 GA4903148-03 Pressure Control assem EVO 2011 1
35 GA4903148-23 Fill Manifold sub assm 1
36 GA4903148-04 Fresh water fill tap assem EVO 2011 1
37 GA4523635 Cover Plate suit Altek ball valves 2011 1
38 GA4903148-14 Pressure gauge assem EVO 2011 1
39 GA4903148-18 Non return valve assem Evo 2011 1
40 GA4903148-19 Non return valve assem Evo 2011 1
41 GA5008629 female rubber door holder (black) 1
42 GA5003643 Washer 8mm SS HD 23
43 GA5004749 M8x80 Bolt 4
Continued over page
Chapter 5 - Left Hand Pod - 31
ITEM NO. PART NUMBER DESCRIPTION QTY.
44 GA5011465 M8x16 bolt ZP 7
45 GA5011501 M8x120 Bolt 4
46 GA5004085 M8x20 bolt 5
47 GA4552135 Spacer for Altek Rotary valve 4
48 GA5004053 Bolt BHCS S'Steel M6x20 1
49 GA5048780 Dome plug 12mm 3
50 GA5075110 Plastic water tank 30L black with soap holder 1
51 GA4523740 30L hand wash Tank mount bracket 2
52 GA5070735 Hand wash bottle tap 1
53 GA5004429 M6 Nyloc Nut SS 1
54 GA5048115 Nut nyloc M6 1
55 GA4903148-12 Fresh Water Filter Manifold 1
56 HB200 Straight Hose Barb 2" 1
57 HB050-90 Hose Barb Elbow 1/2 1
58 GA5065580 Plug in hose tail AS40/25 1
59 GA5065690 Safety pin AS40 1
60 GA5065680 Blind cap Plug AS40 2
61 GA4903148-24 4 Way Valve - Prairie LH Pod 1
62 GA4903148-25 Hopper Connections - Prairie LH Pod 1
63 GA5065575 Plug in hose tail AS40/20 1
64 GA5065750 female hose tail AS24/15/90 1
65 GA5065695 AS24 Safety Pin 1
66 GA5065615 Plug in hose tail AS40/25/90 degree 1
67 GA5003875 50mm round black inserts 2.5 - 4.5mm wall 2
68 GA4523840 Filter mount plate suit 2011 pod 1
69 GA5017645 1/4" Flat washer large 3
70 GA5001333 2" Fill filter with 50 mesh screen viton 1
71 SL200-45 2" Street Elbow 45 degree 1
72 CPLG200 2 poly pipe coupling 1
73 GA5012175 Narva Water Proof Switch Cover B/P 1
74 GA5075250 On/On Switch 10A DPDT 1
75 GA4903148-05 Pod cover door assem EVO 2011 1
32 - Prairie Eco Parts Manual - Rev 1.0
LH Pod Door
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4523640 Fill Station Cover 1
2 GA5009841 Handle black HD poylthne
1
3 GA5011607
Male rubber door holder
1
4 GA5011405 M6x35 bolt 1
5 GA5004437 M6 SS Washer 1
6 GA5048115 Nut nyloc M6 1
7 GA5004883 Washer 8mm HD 4
8 GA5020415 Hinge S/S 50 x 52 x 3 2
9 GA5051230 M5x15mm FHCS SS 8
10 GA5003983 M5 washer ss 4
11 GA5003975 M5 Nyloc nut SS 4
12 GA4572010 Washer 1
13 GA5004707 M8x20 unbrako 2
14 GA5011457 M8 Dome Nut 2
Chapter 5 - Left Hand Pod - 33
3 4 5 6 7 8
DESCRIPTION QTY.
3 way ball valve 1
" Suction filter
et Elbow 45 degree
Suction Filter
1
1
A
Elbow 2" female 1
treet Elbow 2" 1
Flat washer large 3
Spring washer SS 3
M8x20 bolt 3
unt plate suit 2011 pod 1 5 3
ght Hose Barb 2" 1
e Barb Elbow 2" 1 13 B
Reducer Bush 2 x 1 1/4 1
Hose Barb Elbow 1 1/4 1
12
C
8
10 4 11
7
REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
GA4903148-06 Suction Filter Sub Assem
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
ITEM NO. PART NUMBER DESCRIPTION TITLE:
QTY.
1 4542237 2" 3 way ball valve Suction filter sub assem Evo 2011 1
ction for filter details 2 317072 2" Suction filter DATE CREATED: 1
UNLESS OTHERWISE SPECIFIED 13/05/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS
GA4903148-06 A3
3 SL200-45 2" Street
ALL EDGESElbow 45 Luke degree 1
DRAWN:
DEBUR M
DATE EDITED: MATERIAL:
13/11/2012
3 4 4 EL200-90 Pipe Elbow 2" female
Coen DO NOT SCALE DRAWING SCALE:1:4 SHEET 1 OF 1 1
5 SL200-90 Street Elbow 2" 1
6 GA5017645 1/4" Flat washer large 3
7 GA5004919 M8 Spring washer SS 3
8 GA5004085 M8x20 bolt 3
9 GA4523840 Filter mount plate suit 2011 pod 1
10 HB200 Straight Hose Barb 2" 1
11 HB200-90 Hose Barb Elbow 2" 1
12 RB200125 Poly Pipe Reducer Bush 2 x 1 1/4 1
13 HB125-90 90' Poly Hose Barb Elbow 1 1/4 1
34 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6 7 8
DESCRIPTION tap closed/QTY.
Ball Valve Banjo 1" 1
Cam lock female coupler / 1 A
male thread 1"
Hose Barb 1" 1
plug Banjo 1" 1
Exhaust clamp 1 5/8" 1
M8 Nyloc Nut
Washer 8mm HD Chem Probe 2
2
C
4
5
D
3 GA4903148-07 Chemical Probe
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 UV100FP Ball Valve Banjo 1" REV NO CHANGE DATE ECN NO.
1
1-3 MORANG CR
2 100B Cam lock female coupler / male thread 1" 1
GOLDACRES PH:MITCHELL PARK 3352
03 53426399
FAX: 03 53426308
3 HB100 Hose Barb 1" TITLE: 1
Chem probe Evo 2011
4 100PL plug Banjo 1" 1
DATE CREATED:
DWG NO.
5 GA5006705 Exhaust
DIMENSIONS AREclamp
UNLESS OTHERWISE SPECIFIED
DEBUR ALL EDGES
1 5/8"
27/09/2004
IN MILLIMETERS
DRAWN:
Luke
GA4903148-07 A3 1
DATE EDITED: MATERIAL:
3 6 GA5004917
4 M8 Nyloc Nut
13/11/2012
Matt DO NOT SCALE DRAWING SCALE:1:2 SHEET 1 OF 1 2
7 GA5004883 Washer 8mm HD 2
Chapter 5 - Left Hand Pod - 35
3 HB200-90 Hose Barb Elbow 2" 1
4 HB100 Hose Barb 1" Banjo 1
Fresh Water Filter Manifold
1
C
D
4
3 4 5 6 7 8
RIPTION QTY.
alve 2 WAY
E GA4903148-12
2 Fresh Water Filter Manifold
ail AS40/25/90 1 NO. PART NUMBER DESCRIPTION
ITEM QTY.
gree REV NO
ek AS40 11 EL200-90 Pipe Elbow 2" female 1
pin AS40 12 MACH0311 Poly fitting 2” female to 2” male to 1” female 1
TITLE:
3 HB200-90 Hose Barb Elbow 2" 1 Fresh W
F
4 HB100 Hose Barb 1" Banjo 1 DATE CREATED:
DWG NO.
UNLESS OTHERWISE SPECIFIED 18/09/2012
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4903
Pressure Control Assembly
DEBUR ALL EDGES
DATE EDITED: MATERIAL:
13/11/2012
1 2 3 4 Coen DO NOT SCALE DRAWING SCALE:1:2.5
3
1
1
2
GA4903148-03 Pressure Control Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5065545 Quick fit valve 2 WAY 2
2 GA5065615 Plug in hose tail AS40/25/90 degree 1
3 GA4582395 Cap Altek AS40 1
4 GA5065690 Safety pin AS40 1
36 - Prairie Eco Parts Manual - Rev 1.0
REV NO CHANGE DATE
1-3 M
GOLDACRES MITC
PH: 0
FAX:
3 4 5 6 7 8
N QTY.
ll valve 1
w 2" 2 A
Fresh Water Fill Tap
2
1 B
GA4903148-04 Fresh Water Fill Tap
ITEM NO. PART NUMBER DESCRIPTION QTY. D
1 4542137 Arag 2" 2 way ball valve 1
3 4 5 6 7 8
ON QTY. 2 HB200-90 Hose Barb Elbow 2" 2
e 160 psi 1
asher 1Pressure Gauge A
t Brass 1
h in Brass 1
P
1 REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
2 GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308 B
TITLE:
3 Fresh water fill tap assem EVO 2011
DATE CREATED:
4 UNLESS OTHERWISE SPECIFIED 21/12/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DWG NO.
A3
DEBUR ALL EDGES Luke M
GA4903148-04
DATE EDITED: MATERIAL:
13/11/2012
3 4 Coen DO NOT SCALE DRAWING SCALE:1:2.5 SHEET 1 OF 1
GA4903148-14 Pressure Gauge Assem
D
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4948470 Small Face Gauge 160 psi 1
2 GA5017641 1/2" thin flat washer 1
3 GA5066940 1/4" BSPP Socket Brass 1
4 GA5016235 Swivel Elbow push in Brass 10x1/4 BSP 1
Chapter 5 - Left Hand Pod - 37
REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
2 3 4 5 6 7
PART NUMBER DESCRIPTION QTY.
5002473 Non return valve philmac 3/4" 1
075-SH Short nipple 3/4" 1
075 Tee female 3/4" 1
75-90 hose barb elbow 3/4" thread 1
3/4" barb
75-90 Street elbow 3/4" male-3/4" 1
75 Non Return Valve
1 - Tank Rinse
female 90 deg
barb male 3/4"
4582415 Coupling Altek AS24 to 3/4" BSPT 1
Male
5065695 AS24 Safety Pin 1
5
1
2
3
6
Note: GA4903148-13
was replaced by 4
GA4903148-18 and GA4903148-19
(1/5/2011)
REV NO CHANGE
GOLDACRE
TITLE:
GA4903148-18 Non Return Valve - Tank Rinse Non return valve assem Evo 2011
Pressure Delivery
ITEM NO. PART NUMBER DESCRIPTION UNLESS OTHERWISE SPECIFIED
DATE CREATED:
15/11/2010 DWG NO. QTY.
DIMENSIONS ARE IN MILLIMETERS
GA4903148-18
1 GA5002473 Non return valve philmac 3/4"DEBUR ALL EDGES 1
DRAWN:
Luke M
DATE EDITED: MATERIAL:
13/11/2012
2 2 NIP075-SH
3 Short nipple
4 3/4" Coen DO NOT SCALE DRAWING 1
SCALE:1:2 SH
3 TEE075 Tee female 3/4" 1
4 HB075-90 hose barb elbow 3/4" thread 3/4" barb 1
5 SL075-90 Street elbow 3/4" male-3/4" female 90 deg 1
6 HB075 barb male 3/4" 1
7 GA4582415 Coupling Altek AS24 to 3/4" BSPT Male 1
8 GA5065695 AS24 Safety Pin 1
38 - Prairie Eco Parts Manual - Rev 1.0
RT NUMBER DESCRIPTION QTY.
02473 Non return valve philmac 3/4" 1
-90 hose barb elbow 3/4" thread 3/4" barb 1
90 Street elbow 3/4" male-3/4" female 90 deg 1
82415 Coupling Altek AS24 to 3/4" BSPT Male 1
65695 AS24 Safety Pin 1
Non Return Valve - Fresh Water
3 4
GA4903148-19 Non Return Valve - Fresh Water Note: GA4903148-1
GA4903148-18 and
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5002473 Non return valve philmac 3/4" 1
REV NO CHANGE
2 HB075-90 hose barb elbow 3/4" thread 3/4" barb 1
3 SL075-90 Street elbow 3/4" male-3/4" female 90 deg 1 GOLD
4 GA4582415 Coupling Altek AS24 to 3/4" BSPT Male 1 TITLE:
5 GA5065695 AS24 Safety Pin 1 Non return valve asse
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 15/11/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Luke M
GA4903148-19
DATE EDITED: MATERIAL:
13/11/2012
2 3 4 Coen DO NOT SCALE DRAWING SCALE:1:2
Chapter 5 - Left Hand Pod - 39
1 2 3 4 5
ITEM NO.
1
A 2
3
Fill Manifold Sub Assembly 4
5
6
7
8
6
1
4
D
3
8
E
GA4903148-23 Fill Manifold Sub Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
F
1 GA5065560 T-piece 3xAS40 M8 inserts 1 UNLESS OTHERWISE SPECIFI
DIMENSIONS ARE IN MILLIM
DEBUR ALL EDGES
2 GA5065565 Cross piece 4xAS40 1 DATE EDITED:
13/11/2012
31 GA5065735 Plug
2 in hose tail AS40/AS403 4 1 Matt
4 GA5065690 Safety pin AS40 6
5 GA5065675 female hose tail AS24/20/90 1
6 GA5065680 Blind cap Plug AS40 1
7 GA5065545 Quick fit valve 2 WAY 2
8 GA5065695 AS24 Safety Pin 1
40 - Prairie Eco Parts Manual - Rev 1.0
4 Way Valve
3 4 5 6
DESCRIPTION QTY.
ug in hose tail AS40/20/90 1
degree
ug in hose tail AS40/25/90 1 A
degree
Blind cap Plug AS40 1 2
ball valve 5 WAY 1 1/4" 1
1 4
C
3
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
GA4903148-24 4 Way Valve TITLE:
DATE CREATED:
4 Way Valve - Prairie LH Pod
UNLESS OTHERWISE SPECIFIED:
ITEM NO. PART NUMBER
18/09/2012
DIMENSIONS ARE IN MILLIMETERS DESCRIPTION QTY.
DEBUR ALL EDGES DRAWN:
DWG NO:
1
DATE EDITED: GA5065610 Plug in hose tailGA4903148-24
AS40/20/90 degree A4 1
APPL DATE MATERIAL:
13/11/2012
Coen
2 GA5065615 Plug in hose tail AS40/25/90 degree 1
DO NOT SCALE DRAWING SCALE:1:3 SHEET 1 OF 1
3 GA5065680 Blind cap Plug AS40 1
4 GA5065530 ball valve 5 WAY 1 1/4" 1
Chapter 5 - Left Hand Pod - 41
2 3 4 5 6
MBER Hopper Manifold
DESCRIPTION QTY.
55 T-piece 3xAS40 no M8 inserts 1
05 AS40 to AS24 1 6 A
35 Plug in hose tail AS40/AS40 1 7
15 Plug in hose tail AS40/25/90 degree 1
90 Safety pin AS40 3
50 female hose tail AS24/15/90 1 2
95 AS24 Safety Pin 1
4
1
5
C
1 2 3 4 5
ITEM NO. PART NUMBER DESCRIPTION 3 QTY.
1 GA4903148-25 2" Fill filter with 50 mesh screen
GA5001333 Hopper Manifold 1
A viton
2 CPLG200 2 poly pipe coupling 1
3 ITEM NO. PART NUMBER 2"DESCRIPTION
SL200-45 Street Elbow 45 degree 1 QTY.
1 GA5065555 T-piece 3xAS40 no M8 inserts 1-3 MORANG CR 1
2 GA5065605 AS40 to AS24 GOLDACRES MITCHELL PARK 3352
PH: 03 53426399 1
FAX: 03 53426308
3 GA5065735 Plug in hose tail AS40/AS40TITLE: 1
Hopper Connections - Prairie LH Pod
4 GA5065615 Plug in hose tail AS40/25/90 degree 1
DATE CREATED:
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS 18/09/2012
DEBUR ALL EDGES DRAWN:
DWG NO:
5
APPL DATE GA5065690
DATE EDITED:
Safety pin AS40 GA4903148-25 A4 3
MATERIAL:
B 13/11/2012
2 6 GA5065750
Coen female
DO hose tail AS24/15/90
NOT SCALE DRAWING SCALE:1:2.5 SHEET 1 OF 1 1
7 GA5065695 AS24 Safety Pin 1
Fill Filter
1
2
C
3
GA4903148-28 Fill Filter
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5001333 2" Fill filter with 50 mesh screen viton 1
2 CPLG200 2 poly pipe coupling 1
3 SL200-45 2" Street Elbow 45 degree 1
E
42 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6 7 8
N QTY.
40/25/90 1
Flow Control Valve Assembly
A
Valve Sub 1
Poly 1
HD 12
ut 4
4
ose Shank 1 3
trol Valve 1
B
7
4 5
4
2
6
C
D
8
GA4906320 Flow Control Valve Assy
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5065615 Plug in hose tail AS40/25/90 degree 1
2 GA4903287 - 02 Flo Control Safety Valve Sub Assembly 1
3 SL100-90 Street Elbow 1" Poly REV NO CHANGE DATE 1 NO.
ECN
1-3 MORANG CR
4 GA5004883 Washer 8mm HD 12
5 GA5004917 M8 Nyloc Nut
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
4
FAX: 03 53426308
TITLE:
6 GA5004749 M8x80 Bolt Flow Control Assembly Prairie Eco 4
7 HBF100 1" Female Thrd X 1" Hose Shank
DATE CREATED:
1
UNLESS OTHERWISE SPECIFIED 14/01/2010 DWG NO.
8 GA4903620-01
DIMENSIONS Prairie Eco Flow
ARE
DEBUR ALL EDGES
IN MILLIMETERS
DRAWN:
C.Turner
Control Valve GA4906320
Sub Assy 1 A3
DATE EDITED: MATERIAL:
27/03/2013
3 4 Matt DO NOT SCALE DRAWING SCALE:1:4 SHEET 1 OF 1
Chapter 5 - Left Hand Pod - 43
degree
Bracket Teejet 3 Way Valve Flow 1
Control Eco
M6 SS Washer 4
M6x16 bolt 2
M6 Nyloc Nut SS 2
Plug in hose tail AS40/25/90 1
degree
T-piece 3xAS40 no M8 inserts 1
Flow Control
AS40 to 1" Male Thread
Dummy plug AS40 G1/4 female
1
1
Valve
Swivel Elbow push in Steel 1
6mmx1/4 BSP (LEGRIS)
3 2 4
9 3 11 7 5 1
REV NO CHANGE DATE ECN NO.
6 2 1-3 MORANG CR
GOLDACRES MITCHELL PARK 33
PH: 03 53426399
10 8 FAX: 03 53426308
TITLE:
Prairie Eco Flow Control Valve Sub Assy
12
DATE CREATED:
UNLESS OTHERWISE SPECIFIED DWG NO.
13 5/02/2013
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4903620-01 A3
DEBUR ALL EDGES
DATE EDITED: MATERIAL:
28/03/2013
2 GA4906320-01
3 Flow Control
4 Valve Matt DO NOT SCALE DRAWING SCALE:1:2.5 SHEET 1 OF 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 344BR-34-03CEC Teejet 3 way regulator valve 6 second 1
2 GA4582385 Coupling Altek AS40 to 1" NPT male thread 2
3 GA5065690 Safety pin AS40 5
4 GA5065620 Plug in hose tail AS40/33/90 degree 1
5 GA4505890 Bracket Teejet 3 Way Valve Flow Control Eco 1
6 GA5004437 M6 SS Washer 4
7 GA5004041 M6x16 bolt 2
8 GA5048115 M6 Nyloc Nut SS 2
9 GA5065615 Plug in hose tail AS40/25/90 degree 1
10 GA5065555 T-piece 3xAS40 no M8 inserts 1
11 GA5065600 AS40 to 1" Male Thread 1
12 GA4582160 Dummy plug AS40 G1/4 female 1
13 GA5016233 Swivel Elbow push in Steel 6mmx1/4 BSP (LEGRIS) 1
44 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6
DESCRIPTION QTY.
afety valve 1" Red 15 bar 1
polmac
Flow Control4 Safety Valve
Safety pin AS40 A
Cross piece 4xAS40 1
S40 to 1 1/4" Male Thread 1
Coupling poly 1 1/4 1
Plug in hose tail AS40/39 1
ug in hose tail AS40/AS40 1
1
5 B
4
6
3
2
7
GA4903287-02 Flow Control Safety Valve 1-3 MORANG CR
ITEM NO. PART NUMBER DESCRIPTION GOLDACRES MITCHELL PARK 3352
PH: 03 53426399 QTY.
FAX: 03 53426308
1 200016 Safety valve 1"
TITLE:Red 15 bar polmac 1
Flow Control Safety Valve Sub Assembly
2
UNLESS OTHERWISE GA5065690
DATE CREATED:
SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS 26/10/2012
Safety pin AS40 4
DEBUR ALL EDGES
3 GA5065565
DRAWN:
Coen Cross piece 4xAS40
DWG NO:
A4 1
GA4903287 - 02
DATE EDITED:
APPL DATE
4
29/04/2013 GA5065595
MATERIAL:
AS40 to 1 1/4" Male Thread 1
Matt
5 CPLG125 DO NOT SCALE DRAWING
Coupling polySCALE:1:5
1 1/4 SHEET 1 OF 1
1
6 GA5065590 Plug in hose tail AS40/39 1
7 GA5065735 Plug in hose tail AS40/AS40 1
Chapter 5 - Left Hand Pod - 45
Chemical
Probe
GA4948250 Complete Kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5013603 PVC pipe 25mm cut 630mm 1
2 HOS25PVC - suit PVC hose 25mm cut 3.2m 1
drum probe
3 HB100-90 Hose barb 90 degree 1" Banjo 1
4 100E Male Adapter 1" Hose Shank 1
5 GA5018309 Ball
valve 25mm FF Lever
1
6 GA5001681 1" SS hose clamp
2
46 - Prairie Eco Parts Manual - Rev 1.0
Chapter 6
DCI - N/A
Chapter 6 - DCI - 47
Chapter 7
DUAL PRODUCT - N/A
Chapter 7 - Dual Product - 48
Chapter 8
INDUCTION HOPPER
3 Hopper Tank
4 5 6 7 8
CRIPTION QTY.
nk And Lid - 60L 1
m Butt Hinge SS 2 A
7 9 15 23
Hopper Bottom 1
per anti vortex cross 1
own valve 1
ozzle 1/2" F thread 1 13
rb Elbow 1/2 2
g Spray Nozzle 1
ball valve 2
x 1/2" thread, 2 x 1/2" 8
arbs) 1
11 9 24
Hose Barb 1 B
t Poly Nipple 1 6
ipple 3/4" x 1/2" 1 21 20 19
to Female Elbow 1 5
eet Elbow 2
2
nduction Hopper Lid 2
12
er 8mm HD 6
g washer SS 6 19 20 21
Pan head Screw 23 10
washer ss 23 C
loc nut SS 23 23 22 18 17
x20 bolt 6
y Bulkhead 2 15
el indicator 60L 1
14 7 1
16 D
4
19 20 21
3
GA4900381-60-EF Complete Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5070040 Hopper Tank And Lid - 60L 1
REV NO CHANGE DATE ECN NO.
2 GA5006661 Hinge 76mm Butt Hinge SS 1-3 MORANG CR 2
3 GA4903105 Induction Hopper Bottom GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
1
4 GA4657115 Induction hopper anti vortex cross
TITLE:
1
5 510100 Push down valveDATE CREATED:
1
UNLESS OTHERWISE SPECIFIED 20/11/2006 DWG NO.
6 510110 DIMENSIONS Tank Rinsing
ARE IN MILLIMETERS
DEBUR ALL EDGES
DRAWN:
Nozzle 1/2" F thread
2007-IH-Assembly-2 A3 1
DATE EDITED: MATERIAL:
47 HB050-90Matt Hose Barb Elbow 1/2 2
15/11/2012
3 DO NOT SCALE DRAWING SCALE:1:10 SHEET 1 OF 2
8 L033A Tank Rinsing Spray Nozzle 1
9 GA5020615 1/2" ball valve 2
10 T12T barb male tee (1 x 1/2" thread, 2 x 1/2" barbs) 1
11 HB050 1/2" Hose Barb 1
12 NIP-050-SH 1/2" Short Poly Nipple 1
Chapter 8 - Induction Hopper - 49
Hopper Tank
ITEM NO. PART NUMBER DESCRIPTION QTY.
13 RN075050 Reducing Nipple 3/4" x 1/2" 1
14 EL050-90 1/2" Female to Female Elbow 1
15 SL050-90 1/2" Street Elbow 2
16 GA5007071 Latch Chemical Induction Hopper Lid 2
17 GA5004883 Washer 8mm HD 6
18 GA5004919 M8 Spring washer SS 6
19 GA5003976 M5 x 20mm Pan head Screw 23
20 GA5003983 M5 washer ss 23
21 GA5003975 M5 Nyloc nut SS 23
22 GA5004085 M8x20 bolt 6
23
TF050
1/2" Poly Bulkhead
2
24 GA4522296 Hopper level indicator 60L 1
25 GA5016473 Foam Tape - Cut 2000 long (not shown) 1
Hopper Tank - Bottom
GA4903105 Complete Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 L056A Hopper Bottom 1
2 GA5018315 Ball Valve Male / Female TEE 3/4" 1
3 HB075-90 Elbow male 3/4" 1
4 GA4572150 Hopper jet tapered 7mm 1
5 SL100-90 Street Elbow 1" Poly 1
6 HB100-90 Hose barb 90 degree 1" Banjo 1
7 UV150FP Ball Valve Banjo 1 1/2" 1
50 - Prairie Eco Parts Manual - Rev 1.0
Hopper Frame
4 5 6 7 8
QTY.
ADV 1
DV 1 A
DV 1 2 17 18
8 Adv 1
2 20 21 21 22
1 7 9 9 8
8 2 13 19
4
11
d 8 14
8 2 4
er x2 4 15 27 B
R8.8 1
011 1 1
1
d 1
per 4
ap 4
hort 4
ed 1 C
1 23 24 25
duty 2
1 16
10 9 11 11 9 8
4
4
4
26 6 5
1
m 1 7 9 9 8
D
10 9 11 11 9 12 5 18 17 3
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4653420 INDUC HOP chassis MNT ADV (23)(24)(25) put fasteners and washers
1
aside in a bag to be fitted to machine
2 GA4653440 INDUC HOP arm UPR ADV 1
3 GA4653445 INDUC HOP arm LWR ADV 01 Latch pin changed 21/11/12
1 -
- Roll pin added 16/09/10 -
4 GA4656855 INDUC HOP tank support 08 Adv 1
REV NO CHANGE DATE ECN NO.
5 GA5000559 M12 Plain nut 2
1-3 MORANG CR
6 GA5050330 M12x20 unbrako GOLDACRES
MITCHELL PARK 3352
PH: 1
03 53426399
FAX: 03 53426308
7 GA5000855(26) Cut down
Bolt M16 to x 110 ZP GR8.8 TITLE: 2
second lip to fit in
8 GA5001029end of M16 socket Nylocheadnut screw Pre-assembled 60L hopper frame suit EF4
9 GA5001009 M16 washer Zink coated DATE CREATED:
DWG NO.
8
UNLESS OTHERWISE SPECIFIED 19/07/2004
10 DIMENSIONS ARE IN MILLIMETERS
GA5000879 Bolt M16 x 180 ZP GR8.8
DRAWN:
GA4903049-65-EF 2 A3
DEBUR ALL EDGES Scott Stowe
DATE EDITED: MATERIAL:
4
11 GA4522294
3/12/2012
Matt
Prairie EF induction hopper x2 Spring mount
DO NOT SCALE DRAWING SHEET 3 OF 3
4
SCALE:1:10
12 GA5000327 Set Screw M12 x 45 ZP GR8.8 1
13 GA4699435 Latch handle SP hopper 2011 1
14 GA4653490 INDUC HOP latch ADV 1
15 GA5007329 Compression spring gold 1
16 GA5007073 Chemical Induction Hopper Spring 4
17 GA5003783 50x50mm 0.8-2.5 Insert Cap 4
Chapter 8 - Induction Hopper - 51
ITEM NO. PART NUMBER DESCRIPTION QTY.
18 GA5012203 Grease Nipple 1/4" UNF Short 4
19 GA5075130 Roll pin M8 x 30mm coated 1
20 GA5011139 M10x100 Bolt 1
21 GA5000117 Washer 10mm SS Heavy duty 2
22 GA5000141 M10 Nyloc Nut 1
23 GA5000587 M12 WASHER 4
24 GA5000575 M12 Spring washer SS 4
25 GA5000295 Set screw HT M12 x 25 4
26 GA5052905 Insert t/s 12mm Hole 1
27 GA5048380 Pin shaft locking 11mm 1
52 - Prairie Eco Parts Manual - Rev 1.0
Chapter 9
FOAM MARKER TANK - N/A
Chapter 9 - Foam Marker Tank - 53
Chapter 10
TRANSCAL - N/A
Chapter 10 - Transcal - 54
Chapter 11
MAIN TANK
4
6500 litre tank assembly
5 6 7 8
TY.
1 24 5 6 7 4
A
1
1
3
1
2
1
1
1
9 22 11 13
1
B
4
10
4
2
1 8
1 1
2
1
1
C
1
1
1
1 14
1
1 15 12
1
14 11
1 D
16
1
17
25
he tank.
18 21 20 23 19
Included with tap (VSFMT300)
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5070100 Tank Evo 6500L bare (no holes)
REV NO CHANGE DATE ECN
1 NO.
1-3 MORANG CR
2 352040 Medium Lid D355 c/w Breather 1 3352
3 GA4901285-2 Tank flushing nozzle (tee) cam adaptor
GOLDACRES MITCHELL PARK
PH: 03 53426399
1
FAX: 03 53426308
4 GA4901285-1 Tank flushing nozzle (elbow)TITLE: cam adaptor 1
5 GA4903086 Pre-assembled Venturi Filler 1
6 GA4903098 Hopper
UNLESS OTHERWISE SPECIFIED Tank Inlet
DATE CREATED:
1/02/2011 DWG NO. 1
DIMENSIONS ARE IN MILLIMETERS DRAWN:
6500L Evo Tank assem 2013 A3
DEBUR ALL EDGES Luke M Continued over page
DATE EDITED: MATERIAL:
3/12/2012
4 Matt DO NOT SCALE DRAWING SCALE:1:25 Chapter 11SHEET
- Main
1 OF 1 Tank - 55
6500 litre tank assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
7 GA4903136 2" Tank Fill 1
8 GA4672885 Tank support bar suit EF tanks 1
9 GA5000581 M12 SS nut 4
10 GA5000587 M12 WASHER 4
11 PLUG100 Plug 1" Banjo 2
12 HB100-90 Hose barb 90 degree 1" Banjo 1
13 GA4903096 Pre-assembled super mix agitator 1
14 HB050-90 Hose Barb Elbow 1/2 2
15 GA4673850 HOS12SIGHT cut 1700mm 1
16 HB050/075-90
90' Poly Hose Barb Elbow 1/2 x 3/4 1
17 GA4673855 3/4 Hose cut 600mm 1
18 HB200 Straight Hose Barb 2" 1
19 GA4903550 Remote tank drain handle 1
20 300D Camlock 3 inch NPT Female thread 1
21 HB300-90 90' Poly Hose Barb Elbow 3" 1
22 300120 Basket Filter D 302 x 254 1
23 VSFMT300 VALVE 3" male NPT x 3" male Adapter - Valve Body 1
24 GA4902146 Dry sight tube tank float and guide kit suit Evo no light 1
25 GA4903097 Pre-assembled sump drain all models 1
Tank Flush Elbow
ITEM NO. PART NUMBER DESCRIPTION QTY.
Complete Sub Assembly 1
1 GA4572015 Tank rinse adaptor with cam lock 1
2 NIP075-6 3/4" X 6" Poly Nipple 1
3 Elbow HB075-90 Hose barb elbow 3/4" thread 3/4" barb 1
4 B55270-34-18 Tank rinse nozzle 3/4 BSP 1
5 75D Female Coupler 3/4 female Thread 1
56 - Prairie Eco Parts Manual - Rev 1.0
Tank Rinse Tee
ITEM NO. PART NUMBER DESCRIPTION QTY.
Complete Sub Assembly 1
1 75D Female Coupler 3/4 female Thread 1
2 GA4572015 Tank rinse adaptor with cam lock 1
3 T34T Tee Barb 3/4 Thread 1
4 NIP075-6 3/4" X 6" Poly Nipple 1
5 B55270-34-18 Tank rinse nozzle 3/4 BSP 1
Supermix Agitator
Please note: Agitator fitted with 3mm jet
ITEM NO. PART NUMBER DESCRIPTION QTY.
Complete Sub Assembly 1
1 502054 Agitator Mixer body with nut and rubber seal 1
2 HB075-100 3/4" x 1" hose barb 1
3 GA5012375 1/2" Brass Elbow & Nut 1
4 PLUG050 Pipe Plug 1/2 1
006100 Supermix agitator brass elbow o-ring 1
Chapter 11 - Main Tank - 57
Venturi Filler
Note:
1 x GA5007235 Cobra Clamp 36.0/91.4310 Not Shown
Not all parts supplied with kit 500232 are used in this assembly
GA4903086 Pre-assembled venturi filler
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 500232 Venturi Filler. not assembled
1
2 106625 Hosetail D.25 for FlyNut 1 1/2 1
3 MACH0022 Jet for Arag venturi 1
4 HBF075 Hose barb female 3/4" 1
5 RB075050 Poly Pipe Reducer Bush 3/4 x 1/2 1
6 GA5050205 Hose Lay flat Blue - 32mm cut 405mm 1
7 G10061 O-Ring 29 x 3mm 1
58 - Prairie Eco Parts Manual - Rev 1.0
Hopper Tank Inlet
Note:
1 x GA5003325
2 x 2” SS hose clamp
Not shown
GA4903098 Complete hopper inlet flange
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 L026A Barb to suit tank top 1
2 SE200 Elbow 2 street 2 male to 2 female 1
3 HB200-150 Straight Hose Barb 2 x 1 1/2 1
4 GA5000527 Screw 12G x 1 XR STS Pan SS 4
5 GA4673860 50mm PVC Hose cut 1550mm
1
GA5003325 Stainless Steel 2” clamp (not shown) 1
2” Tank Fill
Note:
1 x GA5003325
2 x 2” SS hose clamp
Not shown
GA4903136 Complete 2”
tank fill assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 L026A Barb to suit tank top 1
2 SE200 Elbow 2 street 2 male to 2 female 1
3 HB200 Straight Hose Barb 2" 1
4 GA5000527 Screw 12G x 1 XR STS Pan SS 4
5 GA4673860 50mm PVC Hose cut 1550mm 1
GA5003325 Stainless Steel 2” Clamp (not shown) 1
Chapter 11 - Main Tank - 59
Remote Drain
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4653657 Sump ball valve inter drive shaft EF 1
2 GA4653656 Sump ball valve drive flange EF 1
3 GA4653658 Sump ball valve drive shaft EF 1
4 GA5004883 Washer 8mm HD 16
5 GA5004917 M8 Nyloc Nut 7
6 GA5065455 Bolt Gr8.8 M10x30 2
7 GA5000141 M10 Nyloc Nut 2
8 GA5000117 Washer 10mm SS Heavy duty 4
9 GA4513440 UNI ROD ALIGNING & SUMP HOSE HANGER PLATE 1
10 F70661A UNI ROD HANGER PLATE
1
11 F70662A UNI ROD CLAMPING PLATE 1
12 GA5004711 M8x25 bolt 8
13 GA5004919 M8 Spring washer SS
3
14
GA5003645 5-16 x 1 1-4 Flat
washer SS 1
15 GA5001893
M24 Washer HD SS 1
16 GA5011465 M8x16 bolt H/T 2
60 - Prairie Eco Parts Manual - Rev 1.0
1 2 3 4 5 6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018309 12mm Ball valve 1
2 HB050/075-90 90' Poly Hose Barb Elbow 1/2 x 1
A
3/4
3 F70565A Sump drain mounting plate 1
4 GA5001739 M20 Heavy Duty Flat Washer 2
Sump Drain Tap 5
6
HB050-075
GA5002077
1/2"Male Thd X 3/4" Hose barb
25mm Key Ring S/S
1
1
5
4
6
3
B 4
1
2
1-3 MORAN
QTY.GOLDACRES PH: 03 5342
MITCHELL P
ITEM NO. PART NUMBER DESCRIPTION
FAX: 03 534
1 D
GA5018309 12mm Ball valve DATE CREATED:
TITLE:
1
Pre-assembled sump drain all models
UNLESS OTHERWISE SPECIFIED:
15/02/2010
2 HB050/075-90 90' Poly Hose Barb Elbow 1/2 x 3/4 DIMENSIONS ARE IN MILLIMETERS
DEBUR ALL EDGES DRAWN:
DWG NO:
1
DATE EDITED: Luke M GA4903097
REV NO CHANGE APPL DATE
3 F70565A Sump drain mounting plate 3/12/2012
Matt
MATERIAL:
1
1 2 DO NOT SCALE DRAWING SCALE:1:2 SHEET 1 OF 1
4 GA5001739 M20 Heavy Duty Flat Washer 2
5 HB050-075
1/2"Male Thd X 3/4" Hose barb
1
6 GA5002077
25mm Key Ring S/S 1
Tank Stops
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4522515 Front tank stop RHS 1
2 GA4522510 Front tank stop LHS 1
3 GA5000587 M12 WASHER 8
4 GA5011239 M12x50 bolt 4
5 GA5012461 M12 Nyloc nut Z/P 4
Chapter 11 - Main Tank - 61
Tank Straps & Brackets
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 F70127A 50mm Tank Strap Bracket 4
2 GA5000587 M12 WASHER 8
3 GA5012461 M12 Nyloc nut Z/P 4
4 GA5011239 M12x50 bolt 4
GA5003859 Tank Strap - Order per metre
N/A
62 - Prairie Eco Parts Manual - Rev 1.0
Chapter 12
WHEELS, AXLES & MUDGUARDS
Air Bag Axle
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4652810 Prairie/Advance EF Airbag frame 1
2 GA4656930 Axle EF AirBag 2100mm 10 Stud 1
3 GA5066455 Trifunctional bush suit ADV EF 2
4 GA5015139 High control shocker 2
5 GA5004738 Bolt M8 x 70 HT ZP
2
6 GA5005311 Air spring HT230 single
air stud 2
7 GA5004917 M8 Nyloc Nut 2
8 GA5004883 Washer
8mm HD
4
9 GA5002539
3/4 Z/P Comm Flat Washers
1
Chapter 12 - Wheels, Axles & Mudguards - 63
Air Bag Axle
ITEM NO. PART NUMBER DESCRIPTION QTY.
10 GA5010867 Ride height levelling valve (includes lever arms) 1
11 GA5001739 M20 Heavy Duty Flat Washer 13
12 GA5049490 Bolt 3/4 x 4 UNC HT ZP 4
13 GA5048430 3/4" UNC Nyloc Nut 6
14 GA4632050 Suspension narrow retainer 2
15 GA5017659 Washer 1" Flat HD ZP 16
16 GA5006031 1" x 5" UNC Bolt (2050mm axles) 8
GA5006151 1” x 8” UNF Bolt (3000mm axles)
17 GA5012439 1" Nyloc Nut UNC ZP (2050mm axles) 8
GA5012445 1” Nyloc Nut UNF ZP (3000mm axles)
18 GA5017615 Washer 1/2 Flat ZP Heavy Duty 8
19 GA5068715 1/2 In UNC x 1.5 In Bolt 8
20 GA5017623 Washer 3/8 Flat ZP Heavy Duty 4
21 GA5002599 Set Screw 3/8 x 1 1/4 UNC S/Steel 4
22 RCS-14J Single Clamp Jaws PP Gr3 14mm 4
23 RCD-14J Double Clamp Jaws PP Gr 214mm 4
24 RCD-2PT Double Clamp Plate Top GR2 2
25 RCS-2PT Single Clamp Top Plate grp 2 2
26 GA5004447 M6 Spring washer SS 2
27 GA5011405 M6x35 bolt 2
28 S49-0404 Ryco 1/4" 90 Deg Elbow 5
29 GA5051366 Insert round 63.5 x 1.25 - 2.0mm 2
30 GA5011425 M6 x 35mm Cap Screw 4
31 S50-040404 Tee 1/4" BSPT 1
32 GA5069335 Plug 1/4" BSPT Brass 1
33 GA5018323 1/4" M-F Ball Valve (SS) 2
34 GA5001009 Flat washer M16 HD 56
35 GA5000931 M16x50 bolt 28
36 GA5075080 Hex nut protection cap suit M16 black 28
37 GA5001029 M16 Nyloc nut 28
Note: Rubber tee suit ride height levelling valve - GA5014651
64 - Prairie Eco Parts Manual - Rev 1.0
4 5 6 7 8
QTY.
16
8
Mudguards A
8
2
12
t 2
16
8
8 13
mm 6
1010 2 11 10 9
ex 12
B
ag 1
- 38" 1
1
C
1
5 4 8 6 6 7
38" & 42"ITEM NO. Steering
Wheels, PART NUMBER DESCRIPTION
axle (not shown) QTY.
Part Number1 GA5001043DescriptionM16 SS washer
QTY 16
GA4900591-EF-S
2 Full
GA5000939 mudguard M16x60 bolt 1
kit 8
D
GA4655247
3 Mudguard bracket
GA5001029 M16adjNyloc nut 6 8
4
GA5001029 GA5011949
Mudguard 500W xGoldacres
R1000 Mudflap 2 2
5
GA5003825 GA5075070 Anti sail mudguard
M16 x 60mm bolt 18 bracket 2
GA5000941
6 M16
GA5002565 Nyloc Nut 18Flat SS
Washer 3/8 x 1" 16
GA5001043 16mm washer 36
7 GA5011133 Nut M10 Dome nut SS 8
GA5075070 Anti sail mudguard bracket 2
8 GA5006145 M10 x 30 SS Bolt 8
GA5011949
9 Goldacres mudflap
GA5003925 2
Insert round 45mm x 0.8 - 3.0mm 6
GA5066162 M10 x 25mm SSMudguard
GA5066976 bolt 12 x R1010 - Suits 18.4x38 & 20.8x42 tyres
510W
10 REV NO CHANGE DATE 2 NO.
ECN
GA5011133 GA5004263 Mudguard
Nut M10 dome nut SS 630W
20 x R1000 - Suits 24.5x32 & 30.5x32 tyres 1-3 MORANG CR
11
GA5002665 GA5066977
Washer 3/8 x 1" Mudguard
flat SS Mounting
40 GOLDACRES
Bracket Dunloflex (H50.660)
MITCHELL PARK 3352
12
PH: 03 53426399
FAX: 03 53426308
12
GA5006145 M10 x 30 SS bolt 8 TITLE: 1
Refer to tables below for mudguard bracket part numbers
For wide wheels
13 use 12x spacer GA4535575 1
and change M16x60mm bolts to M16x90 (GA5011297)
DATE CREATED:
DWG NO.
38” Wheels, Air BagUNLESS
AxleOTHERWISE
DIMENSIONS
SPECIFIED
ARE IN MILLIMETERS
2/03/2011
A3
DEBUR ALL EDGES
DRAWN:
Luke M
Evo 2013 mudguard assem
Part No Description
DATE EDITED: MATERIAL:
16/11/2012
4 Matt
GA4900591-EF-NS-38 Mudguards kitDO38" to suit EF with a/bag
NOT SCALE DRAWING SCALE:1:25
susp. SHEET 1 OF 1
GA4655078 Mudguard bkt 38" RH EF airbag
GA4655079 Mudguard bkt 38" LH EF airbag
42” Wheels, Air Bag Axle
Part No Description
GA4900591-EF-NS-42 Mudguards kit 42" to suit EF with a/bag susp.
GA4655076 Mudguard bkt 42" RH EF airbag
GA4655077 Mudguard bkt 42" LH EF airbag
Chapter 12 - Wheels, Axles & Mudguards - 65
Wheel Speed Sensor
Wheel speed sensor kit 0630171152
Item No Part No Description Quantity
A 0630171149 Speed sensor with 7 1/2 ft cable 1
B 0630159402 Red magnet north 2
C 0630159403 Black magnet south 2
D 0630159483 Turret assembly 2
E 1070159472 Speed sensor rod 1
F 3131000016 1/4 lock
washer
2
G 3121001031 1/4-20 Hex nut 2
H 3121001043 1/2-13 Hex
nut
I 3131000028 1/2 lock washer 4
ITEM NUMBER PART NUMBER
DESCRIPTION
QTY.
1 0630171152 Raven Wheel speed sensor kit 1
2 GA4534520 Speed Sensor Tab Bolt On 1
3 GA5004883 Washer 8mm HD 4
4 GA5004711 M8x25 bolt 2
5 GA5004917 M8 Nyloc Nut 2
6 GA5001009 Flat washer M16 HD 4
7 GA5000931 M16x50 bolt 2
8 GA5001029 M16 Nyloc nut 2
9 GA5017615 Washer 1/2 Flat ZP Heavy Duty 4
66 - Prairie Eco Parts Manual - Rev 1.0
Wheels
32 Please note wheels are fitted as a left and right hand
pair. So when ordering complete wheel and tyre
fi
unit, please note on the order which side is required.
Rims are supplied painted and with speed sensor
21 holes.
fl
fl
18.4 x 38 wheels
Item Part number Description
1 GA4901410 Complete wheel and tyre
2 GA5018820 38” x 15” Wheel, 10 stud, 0 offset
3 GA5001108 18.4x38 Tyre 16 ply
fi
fifi fl
fi fi fl fi
fi fi fl fi
20.8 x 42 wheels
fl fl fl
fi
fi fi fl
Item Part number
Description fl
1 GA4901415 Complete wheel and tyre
2 GA5001105 42” x 18” Wheel, 10 stud, 0 offset
3 GA5020830 20.8x42 Tyre 16 ply
Wheel Nuts
Part number Description
GA5018892 22mm wheel nut
GA5018900 M22 Tapered washer
Chapter 12 - Wheels, Axles & Mudguards - 67
Hub - 90 Series
Complete 90 Series Hubs/Stub Axles Available TO DETERMINE SIZE/SERIES,
Part No GA5018119 MEASURE CROSS SECTION. 90mm
2
1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5052120 90 Series Cap Kit 1
2 GA5052190 80/90 Series Crown Nut Kit 1
3 GA5052165 90/110 Series Nut Kit 1
4 GA5052205 90 Series Stud Kit 1
5 GA5052200 90 Series Bearing Kit 1
6 GA5052195 90 Series Heavy duty seal 1
68 - Prairie Eco Parts Manual - Rev 1.0
Chapter 12 - Wheels, Axles & Mudguards - 69
Chapter 13
BOOM CENTRE
4 5 6 7 8
QTY.
1 Boom Centre Assembly
1 A
4
32
2
1
12 5
1
4
1
4
B
2 19
2 14 17
1 19 17 17 20
24
1 16
10 33
4 26
1 27 C
1 31 13
2
2 20
8 29 3
17
12 24
4
4
8 25
8 18 13
8 7 28 D
4 23 11 15
2 22 21 4 9
8 30 6 29
4
4
2
4 ITEM NO. PART NUMBER DESCRIPTION QTY.
4 1 GA4658120 Centre section 2011 1
2
2 GA4658145 Spray bar suit 2011 center section 1
1
3 GA5075090 Center wear strip polystone 7000SR 380 x 74 x 12mm 4
1 4 GA4572365 Tilt pin suit wide centre 2 ECN NO.
REV NO CHANGE DATE
5 GA4658125 2011 Boom centre tilt arm RH 1-3 1
MORANG CR
6 GA4658130 2011 Boom centre tilt arm LH GOLDACRES MITCHELL PARK 3352
PH:103 53426399
FAX: 03 53426308
7 GA4502280 pin retainer TITLE: 4
8 GA5075060 Glacier Bush 60mm ID x 50mm longcentre 2011 Base assembly
Boom 4
UNLESS OTHERWISE SPECIFIED
DATE CREATED:
23/03/2010 DWG NO. Continued over page
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4922195 - my13 A3
DEBUR ALL EDGES
DATE EDITED:
Luke Myers
MATERIAL:
Chapter 13 - Boom Centre - 70
2/08/2012
4 Matt DO NOT SCALE DRAWING SCALE:1:20 SHEET 1 OF 1
Boom Centre Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
9 GA4653316 Boom centre 2011 24m+ fold ram mnt 1" 2
10 GA4572200 Center section fold ram pin suit mk2 and mk3 - 09 2
11 GA5018542 Phasing cylinder 3.25x18x1.25 (external p) 1
12 GA5018538 Phasing cylinder 3x18x1.25 (external phasing) 1
13 L003A Pin 1 1/8 (suit boom pivot) 4
14 GA4656200 Lower rose end mounting assembly RH 1
15 GA4656201 Lower rose end mounting assembly LH 1
16 GA5001029 M16 Nyloc nut 2
17 GA5017659 Washer 1" Flat HD ZP 8
18 GA5000905 M16x25 SHCS 12
19 GA5006151 1" x 8" UNF Bolt 4
20 GA5012445 Nut nyloc 1" UNF 4
21 GA5000587 M12 WASHER 8
22 GA5000575 M12 Spring washer SS 8
23 GA5000297 SHCS M12 x 25 ZP 8
24 GA5001009 M16 washer Zink coated 4
25 GA5075125 M16x330 bolt 2
26 GA5000117 Washer 10mm SS Heavy duty 4
27 GA5006113 Bolt M10x20 ZP 8.8 4
28 GA5001223 19mm E type circlip 2
29 GA5001883 E-clip 24mm 4
30 GA5012203 Grease Nipple 1/4" UNF Short 4
31 GA5003783 50x50mm 0.8-2.5 Insert Cap 2
32 GA4922220 Rear cable mount 24-36m RH MY13 1
33 GA4922225 Rear cable mount 24-36m LH MY13 1
SHIMS AVAILABLE
Fold Ram Mount Shims
GA4513041 Fold ram mount plate shim (large)
Boom Pivot Shims
GA4535360 Boom rose joint shim (5mm)
GA4535355 Boom rose joint shim (3mm)
GA4535285 Boom Lower Rose End Shim 1mm
Chapter 13 - Boom Centre - 71
3 4 5 6 7 8
djust 24+
QTY. Cable Mount - Rear LH
1
A
4
1/4" UNF 1
er SS 4
crew 4
oated 2
1
t 1
M GAL E/E 1
t B
n MY13 1
retainer 13
1
Washer 2 12
t 2
11
9 3 7
10 6 5 C
2
12
1
13
6 D
ITEM NO PART NUMBER DESCRIPTION QTY.
1 GA4656255 Boom cable tension adjust 24+ LH 1
2 GA5000587 M12 WASHER 4
3 GA5009639 Grease nipple long 1/4" UNF 1
4 GA5000575 M12 Spring washer SS 4
REV NO CHANGE DATE ECN NO.
5 GA5000311 M12x35mm Set Screw 4 1-3 MORANG CR
6 GA5001009 M16 washer Zink coated GOLDACRES 2 MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
7 GA5000939 M16x60 bolt TITLE:
1
8 GA5001029 M16 Nyloc nut Rear cable mount 24-36m LH MY131
9 GA5017061 Turnbuckle FRG COMM GAL E/E 22mm with nut
DATE CREATED:
1
UNLESS OTHERWISE SPECIFIED 21/06/2012 DWG NO.
10 GA4572510
DIMENSIONS Boom cable pivot pin MY13
ARE
DEBUR ALL EDGES
IN MILLIMETERS
DRAWN:
GA4922225 1 A3
Luke M
11 GA4572515 Boom cable pivot pin retainer MY13 1
DATE EDITED: MATERIAL:
2/08/2012
3 4 Matt DO NOT SCALE DRAWING SCALE:1:5 SHEET 1 OF 1
12 GA5001739 M20 Heavy Duty Flat Washer 2
13 GA5048125 M20 Nyloc nut 2
72 - Prairie Eco Parts Manual - Rev 1.0
Cable Mount - Rear RH
3 4 5 6 7 8
IPTION QTY.
ion adjust 24+ RH 1
A
Zink coated 2
60 bolt 1
loc nut 1
ASHER 4
washer SS 4
m Set Screw 4
long 1/4" UNF 1
pivot pin MY13 1
pin retainer MY13 1 B
uty Flat Washer 2 12
loc nut 2
COMM GAL E/E 1
with nut 11
10
3 8
13
C
2 9
7
1
6
5
11
D
12
ITEM NO PART NUMBER DESCRIPTION QTY.
1 GA4656250 Boom cable tension adjust 24+ RH 1
2 GA5001009 M16 washer Zink coated REV NO CHANGE DATE 2 NO.
ECN
1-3 MORANG CR
3 GA5000939 M16x60 bolt
GOLDACRES MITCHELL 1 3352
PARK
PH: 03 53426399
FAX: 03 53426308
4 GA5001029 M16 Nyloc nut TITLE:
1
5 GA5000587 M12 WASHER Rear cable mount 24-36m RH MY13 4
6 GA5000575UNLESS OTHERWISE
M12SPECIFIED
Spring 21/06/2012
washer SS
DATE CREATED:
DWG NO. 4
DIMENSIONS ARE IN MILLIMETERS
GA4922220 A3
7 GA5000311 M12x35mm Set Screw 4
DRAWN:
DEBUR ALL EDGES Luke M
DATE EDITED: MATERIAL:
2/08/2012
3 84 GA5009639Matt Grease nipple long 1/4" UNF
DO NOT SCALE DRAWING SCALE:1:4 1
SHEET 1 OF 1
9 GA4572510 Boom cable pivot pin MY13 1
10 GA4572515 Boom cable pivot pin retainer MY13 1
11 GA5001739 M20 Heavy Duty Flat Washer 2
12 GA5048125 M20 Nyloc nut 2
13 GA5017061 Turnbuckle FRG COMM GAL E/E 22mm with nut 1
Chapter 13 - Boom Centre - 73
Boom Valve Assembly
ITEM NO PART NUMBER DESCRIPTION QTY.
1 GA5065515 Altek single boom valve AS24,3wire, AMP+ 3
2 GA5065810 Boom Valve end cap 2
3 GA5065800 Boom valve bracket 2
4 GA5065680 Blind cap Plug AS40 1
5 GA5065620 Plug in hose tail AS40/33/90 degree 1
6 GA5065805 Connecting rod - suit 3 bank (SS) 2
7 GA5004883 Washer 8mm HD 12
8 GA5011499 GA5052360 M8 weld Nut 8
9
10
GA5004711
GA5004917
M8x25 bolt
M8 Nyloc Nut
4
4
GA5065805 3 Section connecting rod GA5065740 3 Section Boom Valves
GA4562055
4 Section connecting rod
GA5065741
4 Section Boom Valves
GA4562125
5 Section connecting rod
GA5065704 5 Section Boom Valves
GA4562050
6 Section connecting rod GA5065705 6 Section Boom Valves
GA4562045 7 Section connecting rod GA5065706 7 Section Boom Valves
GA4562040 8 Section connecting rod GA5065710 8 Section Boom Valves
Note: Boom valve assemblies do not come with
plumbing fittings.
74 - Prairie Eco Parts Manual - Rev 1.0
Boom Valves
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 80364 Valve body 1
2 GA5065515-Tee body Tee body 1
3 80404 O-ring 30 x 2 fmp 75
1
4 02633 O-ring 30 x 4 fmp 75 2
5 80376 Plug 1
6 37621 O-ring 18 x 2.5 fmp
75
1
7 GA5065695 AS24 Safety Pin 2
8 SAFETY PIN AS27 Safety pin AS27 1
9 80014 C-clip 2
10 80323 Washer 2
11 80004 Disk seal fpm 90 2
12 80414 O-ring 8 x 2 fmp 75 2
13 80005 Disk spring locator 2
14 80322 Spring 25mm 1
15 47800 Manifold 1
16 SAFETY PIN AS30 Safety pin AS30 2
17 GA5065835 Plug in hose tail AS30/AS24 1
18 37628 O-ring 18 x 2.5 fmp 75 1
19 GA5065640 Female Hose AS24/20 1
Chapter 13 - Boom Centre - 75
Flow Meter Assembly
4 5 6 7 8
QTY.
1
4 A
g 2
6
6
2
4
4
4 1
2
4 B
5
3
6
9 8 7 C
Flow meter 063-0171-793 Parts
106-0159-514 Body only D
ITEM NO. PART NUMBER 063-0171-669 Sensor only
DESCRIPTION QTY.
1 630171793 FLOWMETER RFM-60P 1
2 M200CPG 2" flanged spacer 4
3 M200125BRB90 2"Manifold X 1-1/4 Barb 90 Deg 2
4 GA5009335 Gasket Kamlock Nitrile 1 1/2 FIT150 6
5 FC200 200 Series Std Screw Clamp 6
6 GA5006689 Exhaust clamp - 66mm C12 2
7 GA4552080 crush tube 10.2x15x5 4
8 GA5003643 Washer 8mm SS HD 4
9 GA5052590 Nut M8 Nyloc S/S 316 REV NO CHANGE 4 DATE ECN NO.
1-3 MORANG CR
FLOW METER PARTS GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
063-0171-793 Flow meter assembly TITLE:
106-0159-514 Flow meter Body onlyFlow meter assembly
063-0171-669 Flow meter sensor only
DATE CREATED:
DWG NO.
UNLESS OTHERWISE SPECIFIED 9/03/2010
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4903084-PA A3
DEBUR ALL EDGES Luke M
DATE EDITED: MATERIAL:
17/08/2012
4 Matt DO NOT SCALE DRAWING SCALE:1:15 SHEET 1 OF 1
76 - Prairie Eco Parts Manual - Rev 1.0
Centre With Tilt Replacement Links
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4922195 Boom centre 2011 Base assembly 1
2 GA5075135 Tilt cylinder replacement adjustable top link 2
3 GA4572135 Paralift spacer bush 4
4 DB-ADJ-02MACH Short centre bushing for removable pivots 4
Centre With Tilt Cylinders
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4922195 Boom centre 2011 Base assembly 1
2 GA5065051 Hydraulic cylinder 3.5"x5" stroke 2
Chapter 13 - Boom Centre - 77
4 5 6 7 8
QTY.
ew 1 Paralift & Paralift Arms A
m 2
6 16
g 16
2
pins 10
4 17
7.5 2
8 7 15
10 5 B
6 1 19 18 10
2
2
10
11
old 1 9
70 2 8 3
, 2" 12
2
11 C
1 13
1 20
4
2
not shown.
3
6
D
14
10
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4658135 Rear part of paralift to suit new 2010 centre 1
2 GA5066675 Pin paralift rear ram and arm 2
3 GA5066655 Pin paralift chassis arm 6
4 GA5065486 Glacier bush 1 1/8" x 1" long 16
5 GA5066645 Pin Paralift Chassis Ram 2
6 MACH0152 12mm Bolt Bush suit para REV lift pins
NO CHANGE DATE 10 NO.
ECN
1-3 MORANG CR
7
8
GA4572135
GA4562190
Paralift spacer bush
machined bush 40 OD 26ID 17.5 long (zinced)
GOLDACRES 4 3352
MITCHELL PARK
PH: 03 53426399
2
FAX: 03 53426308
TITLE:
9 GA5050450 Grease nipple 6mm Para lift + para arms 2013 8
10 GA5067885 Pin cover - plastic 10
DATE CREATED:
UNLESS OTHERWISE SPECIFIED DWG NO.
11 GA5050355 Insert to
DIMENSIONS ARE IN MILLIMETERS suit 65NB Tube
21/01/2010 6 A3
DEBUR ALL EDGES
DRAWN:
Luke M
GA4922206-01
12 S89-0812
DATE EDITED:
31/07/2012
Elbow 1/4 BSPT x 9/16 UNO
MATERIAL:
2
4 Matt
13 GA5000835 Ball valve hydraulic 1/2" FF SCALE:1:20
DO NOT SCALE DRAWING SHEET 1 OF 1
2
14 GA5051470 M12x50 unbrako 10
15 GA5012461 M12 Nyloc nut Z/P 11
16 GA4903058 Hydraulic Accumulator Manifold 1
17 GA5007787 Accumulator 1.0L Precharge 70 Ba 2
18 GA5070082 Hydraulic cylinder - 2.5" bore, 2" rod, 21" Stroke 2
19 GA4659305 Top Paralift Arm MY12 1
20 GA4659310 Bottom Paralift Arm MY12 1
78 - Prairie Eco Parts Manual - Rev 1.0
Complete Centre & Paralift
4 5 6 7 8
QTY.
2
1 A
1 4 9 18 4 16 15 15 23
4
4
4 8
1
2 5
4 9
16 17
7 15 3 11 B
1
2 24 20
4
4 19
4
16 6
8
6 7
4 2
8 15 C
4 22
8 17
4 6 14 21 21 13
2 15
1 16 12 19 19 20
16 15 15 17
D
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4656240 Long delta link 2
2 GA5067855 Short delt link 1
3 DELTA-LINKSA Short Adjustable delta link 1
4 GA4656260 Boom Delta hanger adjuster bolt 4
5 GA5006537 Rubber Bump Stop 4
6 GA4658140 Shocker mount pivot suit 2011 REV NO centreCHANGE DATE 4ECN NO.
1-3 MORANG CR
7 GA5015139 High control shocker 2 PARK 3352
8 GA4572315 Bump stop travel limiter suit Centre section
GOLDACRES MITCHELL
PH: 03 53426399
4
FAX: 03 53426308
TITLE:
9 GA5000587 M12 WASHER 7
complete center + para lift
10 GA5011239 M12x50 bolt 1
11 GA5000271 M12x140 bolt 2
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 21/01/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4922205-02 A3
DEBUR ALL EDGES Luke M
12 GA5001029
DATE EDITED:
M16 Nyloc nut
MATERIAL: 4
4/12/2012
4 13 GA5049490
Matt Bolt 3/4DOxNOT4SCALE
UNC HT ZP SCALE:1:20
DRAWING SHEET 1 OF 1 4
14 GA5048430 3/4" UNC Nyloc Nut 4
15 GA5017659 Washer 1" Flat HD ZP 16
16 GA5012445 Nut nyloc 1" UNF 8
Continued over page
Chapter 13 - Boom Centre - 79
ITEM NO. PART NUMBER DESCRIPTION QTY.
17 GA5006043 Bolt 1" x 6" UNF 6
18 GA5012461 M12 Nyloc nut Z/P 4
19 GA5001009 M16 washer Zink coated 8
20 GA5000855 Bolt M16 x 110 ZP GR8.8 4
21 GA5001739 M20 Heavy Duty Flat Washer 8
22 GA5012203 Grease Nipple 1/4" UNF Short 4
23 GA4683145
1" x 6" UNC
Bolt cut from 7"
2
24 GA4922185 Adjustable delta link lock up assembly 2011 1
Lower Limit Switch
Mounting bolts etc
included with GA5012129
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4523965 EF Evo 2011 Boom Height adjustment bracket 1
2 GA4654161 Paralift switch bracket 1
3 GA5067080 M8 x 20mm Plastic Knob Bolt 2
4 GA5012129 Narva Boom Height Limit Switch 1
5 GA5000117 Washer 10mm SS Heavy duty 4
6 GA5065455 Bolt Gr8.8 M10x30 2
7 GA5000141 M10 Nyloc Nut 2
80 - Prairie Eco Parts Manual - Rev
1.0
Delta Link Locking Plate
3 4 5 6 7 8
TION QTY.
uit adjustable 1
nk 3
A
RT U Bolts 1
S/S 316 2
Washer 2
4
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4524140 Locking plate suit adjustable delta link 1
2 GA5018245 M8 x 50 x 60 RT U Bolts 1
3 GA5052590 Nut M8 Nyloc S/S 316 2
4 GA5003643 M8 HD ZP Washer 2
REV NO CHANGE DATE ECN NO.
rom rotating at one end 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
of the centre adjuster TITLE:
Adjustable delta link lock up assembly 2011
o it may not have to be moved
pending on length of the link DATE CREATED:
UNLESS OTHERWISE SPECIFIED 4/08/2011 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4922185 A3
DEBUR ALL EDGES Luke M
DATE EDITED: MATERIAL:
4/12/2012
3 4 Matt DO NOT SCALE DRAWING SCALE:1:2 SHEET 1 OF 1
Chapter 13 - Boom Centre - 81
Spring Yaw Kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5075095 Heavy spring suit 2011 center 2
2 GA4572385 Shocker and spring mount pin 4
3 GA5001223 19mm E type circlip 8
4 GA5075150 Eye Bolt 12mm x 100mm Short 4
5 GA5000587 M12 WASHER
4
6 GA5012461 M12 Nyloc nut Z/P 4
7 GA5075115 HD Shock absorber suit 2011center
2
8 GA5001009 Flat washer M16 HD 4
9 GA5001029 M16 Nyloc
nut
4
82 - Prairie Eco Parts Manual - Rev 1.0
Chapter 13 - Boom Centre - 83
Continued over page
4 5 6 7 8
QTY.
all 2 12 32 12 A
16 14
8 Located on chassis
4 15
4
ng 8 13
2 20 19 18
7 5 12
4
4 17
28 26 26 27
h 2 33 B
70 2
22 17
2 8 10
8 3 23 11 33
1 9
PP 1 24
Hydraulic Yaw Kit
5 8
3
25 1 5 6
1 21 29 30 31 3 2 2 4
C
2
2 4 2 2 3
2
2
c 1
2
3
2
2 D
4
Hydraulic Yaw Kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5060817 Hydraulic yaw cylinder with ball ends 2
2 GA5017659 1" HD Washer ZP 8
3 GA5006043 Bolt 1" x 6" UNF 4
4 GA5012445 Nut nyloc 1" UNF 4
5 S93-0409 Nipple 1/4" BSPP x 9/16 UNO-ring 8
6 S24-0804 Reducing bush 1/2 BSPT x 1/4 BSPT 2
7 S82-0404 1/2" Hydraulic Tee 4
8 GA5001739 M20 Heavy Duty Flat Washer 4
9 S44-0808 Bulkhead nipple 1/2" BSPP with nut 2
10 GA5007787 Accumulator 1.0L Precharge 70 Ba 2
11 S160-080816 Inline test point 1/2" BSP 2
12 S82-0808 1/2" Hydraulic Tee - S83-080808 3
13 GA5047708 Pressure Reducing Valve 1
14 GA5007060 Check Valve (45 LPM) 1/2 BSPP zero bar 1
15 S75-0806 0806 nipple BSPTM BSPPOM 3
16 S27-0804 1/2" BSPT - 1/4" BSPT Straight Hydraulic Nipple 1
17 GA5000835 Ball valve hydraulic 1/2" FF 2
18 GA5004437 M6 SS Washer 2
19 GA5004447 M6 Spring washer SS 2
20 GA5011419 M6x50 bolt SS 2
21 GA4523970 Tap Mounting Plate Hydraulic Yaw 2010 bolt on 1
22 RL20-0404 Ball valve 1/4" BSP 2
23 S50-040404 Tee 1/4" BSPT 3
24 S26-0404 1/4" BSPP Socket 2
25 RG01-250 pressure guage 250 BAR 2
26 GA5020510 M4 Washer Heavy duty SS 4
27 GA5049025 Nut M4 Nyloc SS 2
28 GA5049800 M4 x 40 SHCS 2
29 GA5011259 M12 x 76mm x 110mm Square Top U Bolt 2
30 GA5000587 M12 WASHER 4
31 GA5012461 M12 Nyloc nut Z/P 4
32 S167-080808 TEE 1/2 BSPT M x M F 1
33 S27-0808 0808 BSPTM BSPMT nipple 2
84 - Prairie Eco Parts Manual - Rev 1.0
Oversize Sign Mount
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4658150 Oversize mount bracket suit 2011 centre 2
2 GA5009613 Oversize Sign 1
3 GA5075160 M12 x 76mm x 80mm Square Top U Bolt 2
4 GA5000587 M12 WASHER 4
5 GA5012461 M12 Nyloc nut Z/P 4
6 GA5004883 Washer 8mm HD 4
7 GA5052590 Nut M8 Nyloc S/S 316 4
8 GA5003645 5 -16 x 1 1-4 Flat washer SS 4
9 GA5004713 Bolt M8 x 25 SS A2-70
4
Chapter 13 - Boom Centre - 85
Chapter 14
3 4 5 6 7 8
RIPTION Default/
QTY.
Protector (RH) 1 A
yloc Nut 4
r rubber (black)
Washer BOOM WING
1
4
yloc M6 2
0mm bolt 2
p stop extension 1
acket
8mm SS HD 6
5 Bolt SS 7
loc S/S 316 Fence Line End Protector - Standard
3 B
ZP Washer 8
9 11 11 2 6 4 4 5 9 8 8 10
Mounts on
7 inner wing
C
D
1
ITEM NO. PART NUMBER DESCRIPTION QTY.
GA4901385
BoomGA4656314
end protector kit per pair
Boom End Protector (RH)
1 1
GA4656315
GA4901385-boltkit Boom End Protector (LH) (not shown) REV NO CHANGE DATE ECN NO.
Bolt kit to suit GA4901385 assembly 1-3 MORANG CR
2 GA5004917 M8 Nyloc Nut GOLDACRES MITCHELL 4 PARK 3352
PH: 03 53426399
FAX: 03 53426308
GA5006225 Boom stopper rubber - 140mm
3 TITLE:
1
GA5006226 Boom stopper rubber - 210mm (not shown)
4 GA5004437 M6 SS Washer DATE CREATED:
UNLESS OTHERWISE SPECIFIED 13/10/2009 DWG NO. 4
DIMENSIONS ARE IN MILLIMETERS
Boom Protector assembly A3
5 GA5048115 Nut ALL nyloc
EDGES M6 2
DRAWN:
DEBUR
DATE EDITED: MATERIAL:
19/11/2012
3 6 4 GA5004107 M6 x 70mm bolt
Matt DO NOT SCALE DRAWING SCALE:1:10 2 SHEET 1 OF 1
7 GA4522995 Rubber bump stop extension bracket 1
8 GA5048115 Washer 8mm SS HD 6
9 GA5052600 M8x75 Bolt SS 7
10 GA5052590 Nut M8 Nyloc S/S 316 3
11 GA5003643 M8 HD ZP Washer 8
Chapter 14 - Boom Wing - 86
3 4 5 6 7 8
ESCRIPTION Default/
QTY.
nd Protector easy fit 1
My13 A
8 Nyloc Nut 3
pper rubber (black) 1
6 SS Washer 4
ut nyloc M6 2
x 70mm bolt
ump stop extension
Fence Line End Protector - Quick Fit
2
bracket 1
her 8mm SS HD 12
8x75 Bolt SS 6 B
Nyloc S/S 316 3
9 8 8 2 5 4 4 6 9 8 8 10
7 Mounts on
inner wing
C
air REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
mbly ITEM NO. PART NUMBER DESCRIPTION
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
QTY.
FAX: 03 53426308
TITLE:
GA4656316 RH Boom End Protector easy fit MY13
1 1
GA4656317 LH Boom End Protector easy fit MY13 (not shown)
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 13/10/2009 DWG NO.
2 GA5004917 M8 ALLNyloc A3
EDGES Nut 3
DIMENSIONS ARE IN MILLIMETERS
DEBUR
DRAWN:
Boom Protector assembly quick fit
DATE EDITED: MATERIAL:
3 GA5006225
4 Boom stopper rubber - 140mm
31/07/2012
Matt
3 1
DO NOT SCALE DRAWING SCALE:1:10 SHEET 1 OF 1
GA5006226 Boom stopper rubber - 210mm (not shown)
4 GA5004437 M6 SS Washer 4
5 GA5048115 Nut nyloc M6 2
6 GA5004107 M6 x 70mm bolt 2
7 GA4522995 Rubber bump stop extension bracket 1
8 GA5003643 Washer 8mm SS HD 12
9 GA5052600 M8x75 Bolt SS 6
10 GA5052590 Nut M8 Nyloc S/S 316 3
Chapter 14 - Boom Wing - 87
GA5011251 M12 x 52mm x 80mm Square Top U Bolt 2
GA5000587 M12 WASHER 4
GA5012461 M12 Nyloc nut Z/P 4
Boom Protector Assembly - Outer
2 5 4
7
8
1
3
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5004437 M6 SS Washer 4
REV NO CHANGE DATE E
2 GA5004107 M6 x 70mm bolt 2 1-3 MORA
3 GA5048115 Nut nyloc M6 GOLDACRES
2
MITCHELL
PH: 03 534
FAX: 03 53
4 GA4656277 Boom Fold TriTech Long Support Bracket TITLE:
1
5 F70294A boom wing protector Suit 50 x 50 200mm long DATE CREATED:
1
UNLESS OTHERWISE SPECIFIED 22/02/2010 DWG NO.
6 GA5011251 M12 x 52mm x 80mm Square Top U
DIMENSIONS Bolt
ARE IN
DEBUR ALL EDGES
MILLIMETERS
Luke M
DRAWN:
2
Bump Stop Extension Assem
DATE EDITED: MATERIAL:
1 2 7 GA5000587
3 M12 WASHER 4
31/07/2012
Matt DO NOT SCALE DRAWING
4SCALE:1:10 SHEET 1 OF 1
8 1
GA5012461 2
M12 Nyloc nut Z/P
3 4
ITEM NO.
5
PART NUMBER
6
4DESCRIPTION QTY.
7 8
Al Outer Wing Protector suit 50 x
Boom Protector Assembly - Inner
1 F70799A 50 600mm long (2mm S/S) 1
A A
2 GA4505005 Boom Slide Protector SS 2013 1
3 GA5004437 M6 SS Washer 10
4 GA5004107 M6 x 70mm bolt 5
5 GA5048115 Nut nyloc M6 5
4
B B
1
C C
D D
2
3
4
E
ITEM NO. PART NUMBER DESCRIPTION REV NO
QTY.
CHANGE DATE ECN NO.
1-3 MORANG CR
1 F70799A Wing Protector suit 50 x 50 600mm long 1
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
2 GA4505005 Boom Slide Protector SS 2013 TITLE:
1
F 3 GA5004437 M6 SS Washer UNLESS OTHERWISE SPECIFIED
DATE CREATED:
31/07/2012 DWG NO.
10
DIMENSIONS ARE IN MILLIMETERS DRAWN:
Boom Protector - inner EVO 2013 A3
4 GA5004107 M6 x 70mm bolt 5
DEBUR ALL EDGES Name
DATE EDITED: MATERIAL:
31/07/2012
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5 SHEET 1 OF 1
5 GA5048115 Nut nyloc M6 5
88 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6 7 8
DESCRIPTION QTY.
ring pivot kit suit Tritech 1
drum hinge A
ovable pivot assembly
e for removable pivot
Cable
6
Drum
1
assembly
her 1" Flat HD ZP 4 9 8 8 11
" x 8" UNF Bolt 1
x 4.5" UNF Bolt 1 Optional boom weights 16
ut nyloc 1" UNF 2
M12 WASHER 40
17
w M12 x 45 ZP GR8.8 10 B
M12x50 bolt 10
2 Nyloc nut Z/P 20 9 8 8 11
washer Zink coated 6
7 4 4 5 19 18 1 3
se holder plate outer 1
16x50 unbrako 2
M16 Nyloc nut 3 20
ht Disc Cable Drum small 1
0.8kg 12
ht Disc Cable Drum 1.8kg 1 C
15
stopper bolt 1" unf 12 TPI 1
1" x 12 TPI ZP UNF 1 21
M16x100 bolt 1
m stop wear plate MY13 1 6 4 4 7
9 8 8 11
D
3 2
14 12 12 15
13 10 8 8 11
10 8 8 11
REV NO CHANGE DATE ECN NO.
ITEM NO. PART NUMBER DESCRIPTION 1-3 MORANG CR
QTY.
1 GA4932342 Upper bearing pivot kit suit Tritech drum GOLDACRES
hinge
MITCHELL PARK 3352
PH: 03 53426399 1
FAX: 03 53426308
2 GA4912030 Lower removable pivot assembly TITLE: 1
3 DB-ADJ-16LAS Shim plate for removable pivot assembly 6
DATE CREATED:
UNLESS OTHERWISE SPECIFIED DWG NO.
4 GA5017659 DIMENSIONS
Washer 1" Flat Luke
ARE IN MILLIMETERS
DEBUR ALL EDGES
HD ZP
23/02/2011
M
Cable drum suit 2013 Evo
DRAWN: A34
5 GA5006151 31/07/2012
1" x 8" UNF Bolt 1
DATE EDITED: MATERIAL:
3 4 Matt DO NOT SCALE DRAWING SCALE:1:10 SHEET 1 OF 1
6 GA5006039 1" x 4.5" UNF Bolt 1
7 GA5012445 Nut nyloc 1" UNF 2
8 GA5000587 M12 WASHER 40
9 GA5000327 Set Screw M12 x 45 ZP GR8.8 10
10 GA5011239 M12x50 bolt 10
11 GA5012461 M12 Nyloc nut Z/P 20
12 GA5001009 M16 washer Zink coated 6
13 GA4522725 Boom hose holder plate outer 1
14 GA5000935 M16x50 unbrako 2
15 GA5001029 M16 Nyloc nut 3
16 GA4504535 Boom Weight Disc Cable Drum small 0.8kg 1
17 GA4504530 Boom Weight Disc Cable Drum 1.8kg 1
18 GA4572495 Boom drum stopper bolt 1" unf 12 TPI 1
19 GA5010991 Nut 1" x 12 TPI ZP UNF 1
20 GA5011269 M16x100 bolt 1
21 GA4524690 Upper boom stop wear plate MY13 1
Chapter 14 - Boom Wing - 89
Cable Drum
Part No Description Qty
3 4 5 6 7
GA4659580 Right Cable Drum 1
DESCRIPTION QTY.
d ram adjuster plateGA4659585
suit tritec Left Cable Drum 1
boom GA4659590 2
Bi-Fold Right Cable Drum 1
d ram adjuster nutGA4659595
mounting 1
Bi-Fold Left Cable Drum 1
Nut 1" x 12 TPI ZP UNF 4
GA4659600 Right Offset Cable Drum 1
Washer 1" Flat HD ZP 15
Nut nyloc 1" UNF
GA4659605 3 Offset Cable Drum
Left 1
Bolt 1" x 6" UNF
GA4659610 2
Bi-Fold Right Offset Drum 1
1" x 4.5" UNF Bolt
GA4659615 1
Bi-Fold Left Offset Drum 1
nbuckle FRG COMM GAL E/E 1
22mm with nut
13mm Bow Shackle 2
Chain link 11mm Boom Fold
4 Adjuster
Circlip external 25mm 2
oom fold adjuster HD MY13 1
6m Cable Spring Mounting 6
MY13 1 2
3
4
10 11
9
4 1
7 4
12
5
5
13
CHANGES AS PER
BOOM SIZE
STANDARD
5xGA5017659 (1" WASHER) ABOVE RAM
2xGA5017659 (1" WASHER) BELOW RAM
ITEM NO. PART NUMBER DESCRIPTION QTY.
REV NO CHANGE
1 24mk4DB005LAS Fold ram adjuster plate suit tritec boom 2
2 24mk4DB006MACH Fold ram adjuster nut mounting 1 GOLDA
3 GA5010991 Nut 1" x 12 TPI ZP UNF 4
TITLE:
4 GA5017659 Washer 1" Flat HD ZP 15
5 GA5012445 Nut nyloc 1" UNF 3
DATE CREATED:
DWG NO.
6 GA5006043 Bolt 1" x 6" UNFUNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
17/02/2011 2
DEBUR ALL EDGES
DRAWN:
Luke M
Evo 2013 boom fold adju
DATE EDITED:
1/08/2012
MATERIAL:
Continued over page
3 4 Matt DO NOT SCALE DRAWING SCALE:1:15
90 - Prairie Eco Parts Manual - Rev 1.0
Boom Fold Adjuster
ITEM NO. PART NUMBER DESCRIPTION QTY.
7 GA5006039 1" x 4.5" UNF Bolt 1
8 GA5017061 Turnbuckle FRG COMM GAL E/E 22mm with nut 1
9 GA5000669 13mm Bow Shackle 2
10 GA5065020 Chain link 11mm 4
11 GA5008519 Circlip external 25mm 2
12 GA5070775 Boom fold adjuster HD MY13 1
13 GA4905665 36m Cable Spring Mounting MY13 1
Boom Cables
ITEM NO. PART NUMBER DESCRIPTION QTY.
GA5000073 Cable - Lengths; 2
TriTech 24-30mt:
Front - 5140
Rear - 5760
TriTech 33-36mt:
Front - 6590
Rear - 7220
NOTE: Cable lengths are as measured eye to eye
GA5000215 Cable End Eyelet 4
GA5005391 Cable Ferrule 4
Boom Cable Spring - Suit 28-30m
GA4903067 Triple cable spring assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4656230 Cable Spring Shocker Mount Sub assem 1
2 F70057A Delta boom spring plate 2
3 GA5010793 Heavy Spring 3
4 GA5001009 Flat washer M16 HD 4
5 GA5000939 M16x60 bolt 2
6 GA5001029 M16 Nyloc nut 2
Chapter 14 - Boom Wing - 91
1 2 3 4 5 6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4659710 Cable Spring Mount Sub Asm 2
2 GA5010793 Heavy Spring 4
A 3 GA5001009 M16 washer Zink coated 4
4 GA5000939 M16x60 bolt 2
5 GA5001029 M16 Nyloc nut 2
6 Boom Cable Springs - Suit 33&36m
GA5075220 Glacier bush flanged 16mm suit boom
cable pivot 1
1
4 2
B 1
3
3
4
5
3
C
6
GA4905665 33-36 cable damper assembly 5
ITEM NO. PART NUMBER DESCRIPTION QTY. 1-3 MORANG CR
1 GA4659710 Cable Spring Mount Sub Asm GOLDACRES
2
MITCHELL PARK 33
PH: 03 53426399
FAX: 03 53426308
D 2 GA5010793 Heavy Spring TITLE: 4
36m Cable Spring Mounting MY13
3 GA5001009
M16 washerUNLESS
Zink coated
OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS 28/06/2012
DATE CREATED:
4
DEBUR ALL EDGES DRAWN:
DWG NO:
REV
NO CHANGE
4 GA5000939
M16x60
APPL DATE
bolt Coen
DATE EDITED:
MATERIAL:
GA4905665 2
1/08/2012
1 5
GA5001029
2 M16 Nyloc nut
Coen
DO NOT SCALE DRAWING SCALE:1:5
2 SHEET 1 OF 1
6 GA5075220
Glacier bush flanged 16mm suit boom cable pivot 1
Lower Bearing Pivot
GA4932343 Lower pivot assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4656190 Boom hinge bearing mnt 24+ 1
2 GA5015659 Spherical bushing 1 3/8" 1
3 DB-ADJ-02 Short centre bushing for removable pivots 2
4 GA5021085 55mm internal circlip 1
5 GA5012203 Grease Nipple 1/4" UNF Short 1
92 - Prairie Eco Parts Manual - Rev 1.0
Upper Bearing Pivot
Inner Steel Wings
GA4932342 Upper pivot assembly
Part Number Description
28-30M Boom inner
ITEM NO. PART NUMBERBi-Fold RH DESCRIPTION
GA4656780 QTY.
28-30M Boom inner
1 GA4656190
GA4656785 Bi-Fold LH Boom hinge bearing mnt 24+ 1
36M Boom inner
2 GA4656790
GA5015659 Bi-Fold RH Spherical bushing 1 3/8" 1
3 GA4656795
DB-ADJ-13 Bi-Fold
36M Boom inner Long centre bushing for removable pivots 2
LH
4 GA4659260
GA502108542M Boom Inner 55mm
RH
internal circlip
1
5 GA5012203 Grease Nipple 1/4" UNF Short 1
GA4659265 42M Boom Inner LH
Steel Inner Wings
Part Number Description
GA4656780 24-30M Boom inner Bi-Fold RH
GA4656785 24-30M Boom inner Bi-Fold LH
GA4656790 36M Boom inner Bi-Fold RH
GA4656795 36M Boom inner Bi-Fold LH
Chapter 14 - Boom Wing - 93
GA4656051 24m Outer boom section(3749mm Long)
GA4656061 28m Outer boom section(4264mm Long)
GA4656066 30m Outer boom section(5265mm Long)
GA4656071 33m Outer boom section(5764mm Long)
GA4656076 36m Outer boom section(6805mm Long)
GA4659280 42m Outer Boom Inner Section (6252mm Long)
GA4659285 42mOuter Boom Outer Section (2053mm Long)
Aluminium Outer Wings
1 2 3 4 5 6 7
Part Number Description
GA4656066 30m Outer boom section(5265mm Long)
GA4656071 33m Outer boom section(5764mm Long)
GA4656076 36m Outer boom section(6805mm Long)
Aluminium Break Away Tip
X
Part Number Description
GA4656122 Boom breakaway end - 1750mm
GA4656120 Boom breakaway end - 2000mm
GA4656121 Boom breakaway end - 2500mm
REV NO CHANGE D
GOLDACRES
TITLE:
Boom breakaway end in Aluminium 2
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 17/09/2003 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES A. McAndrew
GA4656120
DATE EDITED: MATERIAL:
5/12/2011
1 2 3 4 Luke DO NOT SCALE DRAWING SCALE:1:20 SHEET 1 O
94 - Prairie Eco Parts Manual - Rev 1.0
A
18
15
1 2 3 4 5 6 7 8 10
11 1
A A
B
Three Dimensional Breakaway
B
8
B B
16
7 20
C C C
C
11 2 1
25
13
D D
D
D 5 6 7 8
3 E
4 5 6 7 29 3 8
11 A 14
1827 23 10 REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
15 21 GOLDACRES MITCHELL PARK 3352
24 7
26 11
PH: 03 53426399
10 9
FAX: 03 53426308
28
10
TITLE:
14 11 12 18
Breakaway hinge 2006 complete
22 21
F
15 UNLESS OTHERWISE SPECIFIED
DATE CREATED:
27/02/2006 DWG NO.
10 9
E DIMENSIONS ARE IN MILLIMETERS DRAWN:
breakaway mk3 - Parts manual assembly - 2011 A3
E DEBUR ALL EDGES
11
MATERIAL:
12
DATE EDITED:
11/04/2012
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:7.5 SHEET 2 OF 2
17
B
8
17
16
11 19
F F 24 7 20 8 DATE CREATED:
25
DATE CREATED:
UNLESS OTHERWISE SPECIFIED
UNLESS OTHERWISE SPECIFIED
27/02/2006 27/02/200
DIMENSIONS AREDIMENSIONS
IN MILLIMETERS
ARE IN MILLIMETERS DRAWN:
DRAWN:
DEBUR ALL EDGESDEBUR ALL EDGES
16 DATE EDITED: MATERIAL:
MATERIAL:
19
DATE EDITED:
11/04/2012 11/04/2012
7
1 1 2 2 3 3 4 4 Matt DO NOT SCALE DRAWING
Matt DO NOT SCA
20 Continued over page
11 2 1 C
25
13
11 2 1
30
25
25
4 8 13
6 30
25 25
4 D 8
6
29 3
14 25
6
24 7 29
53
14
6
Chapter
24 7 14 - Boom Wing - 95
5
REV NO CHANGE DATE ECN NO.
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
Three Dimensional Breakaway
ITEM PART NO DESCRIPTION QTY
1 GA4552070 crush tube 16.2x20.5x9.5 2
2 GA5011307 M16x80 bolt 1
3 GA5001029 M16 Nyloc nut 1
4 GA4902060-3 Rodend subassembly 1
5 M10x45 SHCS GA5066985 2
6 GA4552080 crush tube 10.2x15x5 2
7 GA4552075 crush tube 10.2x15x15 2
8 GA5000141 M10 Nyloc Nut 3
9 GA5008545 Eye bolt 1
10 GA5000587 Washer HD ZP 12mm 6
11 GA5012461 M12 Nyloc nut Z/P 13
12 GA5016605 Spring 180x51.5x8 (JS507) 1
13 GA5011489 M8x60 bolt 1
14 GA5004917 M8 Nyloc Nut 2
15 GA4656115 Boom breakaway locking mechanism 1
16 GA4532565 Breakaway MK3 Spring Plate 1
17 GA5006141 M10x40 Unbrako 1
18 GA5011251 M12 x 52mm x 80mm Square Top U Bolt 2
19 GA4532590 Breakaway MK3 turnbuckle plate 1
20 GA5066930 Turnbuckle Jaw & Jaw M8 SS 1
21 GA5000559 Nut ZP M12 1
22 GA5014469 Rod end female 16mm 1
23 GA5000931 M16x50 bolt 1
24 GA4502105 bracket lower suit breakaway hinge 2
25 GA5000319 M12x40 Bolt 8
26 GA4522485 Breakaway Rose end lock plate 1
27 GA5004717 M8x30 SHCS 1
28 GA5004883 Washer 8mm HD 1
29 GA4502095 bracket upper breakaway hinge 1
30 GA4502100 bracket middle breakaway hinge 1
96 - Prairie Eco Parts Manual - Rev 1.0
Boom Line Plumbing
ITEM PART NUMBER DESCRIPTION QTY
1 GA5018273 4 Hole, 1600mm long Poly Boom Manifold *
GA5018275 5 Hole, 2100mm long Poly Boom Manifold *
GA5018279 6 Hole, 2600mm long Poly Boom Manifold *
GA5018281 7 Hole, 3100mm long Poly Boom Manifold *
2 Q517560A-3/4-NYB Teejet Nozzle Body *
3 HBF075 3/4” Hose Barb (Female) *
4 400278 3/4” Adapter *
5 19843-NYR Shut Off Cap *
6 GA5003621 M8 x 16mm Bolt (Plastic) *
GA5011465 M8 x 16mm Bolt (S/Steel) *
7 GA5003623 M8 Plastic Nut *
GA5004917 M8 Nyloc Nut *
8 GA5018315 3/4” Ball Valve *
9 HBF075-90 3/4” Poly Elbow
* Quantities will vary depending on boom size and number of sections.
Chapter 14 - Boom Wing - 97
Manual Fence Line Nozzle
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 58140-NYB Manual Nozzle Body 1
2 QJ4676-90-1/4-NYR 90 degree Nozzle Adapter 1
3 CP19438-EPR Seal 1
B1/4XP10L Left Fence line Nozzle 1
4
B1/4XP10R Right Fence line Nozzle 1
5 CP38936-NYB End Barb Adapter 1
98 - Prairie Eco Parts Manual - Rev 1.0
Solenoid Operated Fence Line Nozzle
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 58140-NYB Manual Nozzle Body 1
2 CP38936-NYB End Barb Adapter 1
3 ECS17560A-3/4-NYB Fence Line Solenoid 1
4 CP19438-EPR Seal 1
5 QJ4676-90-1/4-NYR 90 Degree Nozzle Adapter 1
B1/4XP10L Left Fence Line Nozzle 1
6
B1/4XP10R Right Fence Line Nozzle 1
Chapter 14 - Boom Wing - 99
Adjustable Nozzle Brackets
Note:
Use when extension required:
GA5052595 M8x20 SS bolt
GA5004917 M8 nyloc nut
GA5003645 5/16” x 1 1/4” washer
ITEM PART NUMBER DESCRIPTION QTY
1 GA5018259 “U” Nozzle Bracket to suit 50mm RHS 1
GA5018257 “L” Nozzle Bracket
2 1
GA5018258 “L” Nozzle Bracket - Long
3 GA5066965 Spacer 1
4 GA5018255 Dual Boom Nozzle Extension Bracket 1
5 GA5004741 M8 x 75mm Bolt (S/S 304) 1
6 GA5004917 M8 Nyloc Nut 1
7 GA5003645 5/16” x 1 1/4” Washer 2
Pre Packaged Kits
ITEM PART NO DESCRIPTION
1 GA4948675 Single line nozzle bracket
2 GA4948695 Dual Line nozzle bracket (rear side) Kit
3 GA4948685 Dual Line nozzle bracket (both sides) Kit
100 - Prairie Eco Parts Manual - Rev 1.0
Chapter 15
ELECTRICS
Boom LED Lights
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5060057 Light Boom Clearance LED with plug (orange) 1
2 GA5060056 Light Boom Clearance LED with plug (red) 1
3 GA5051230 Bolt M5 x 16mm FHCS 45º 4
4 GA5003983 M5 washer SS 4
5 GA5003975 M5 Nyloc nut SS 4
Chapter 15 - Electrics - 101
Lights
PART NO DESCRIPTION
GA5018786 LED Tail Light
GA5048975 Rotating Beacon Light
Electrical Components
2 3 4 5 6
2
3
C
ITEM PART NO DESCRIPTION
1 GA5004477 7 Pin Trailer Plug (Round)
2 GA5060350 Adpater to suit American Style Tractors 1-3 MORANG CR
7 pin remote base socketGOLDACRES
MITCHELL PARK 3352
3 GA5004479 & cap PH: 03 53426399
FAX: 03 53426308
TITLE:
DATE CREATED:
UNLESS OTHERWISE SPECIFIED:
102 - Prairie Eco Parts Manual
22/11/2012- Rev 1.0
DIMENSIONS ARE IN MILLIMETERS
DEBUR ALL EDGES DRAWN:
DWG NO:
APPL DATE
DATE EDITED: Name GA5004479 A4
MATERIAL:
23/11/2012 -
2
Matt
DO NOT SCALE DRAWING SCALE:1:1 SHEET 1 OF 1
Raven (AMP) Electrical Connectors
ITEM PART NO DESCRIPTION
1 4084001014 Male Flow Meter Connector
2 4084001015 Female Flow Meter Connector
3 4084001010 Male Speed Sensor Connector
4 4084001016 Female Speed Sensor Connector
5 4084001062 Male Pin for Flow Meter & Speed Sensor Connectors
6 4084001063 Female socket for Flow Meter & Speed Sensor Connectors
Chapter 15 - Electrics - 103
Raven (AMP) Electrical Connectors
ITEM PART NO DESCRIPTION
1 4084001017 Male Loom Connector for 440 & 450 Consoles (16 Pin)
2 4084001018 Female Loom Connector for 440 & 450 Consoles (16 Pin)
3 GA5049175 Backing Shell for 16 Pin Connectors
4 GA5048905 Gold Male Pin For Raven Loom Connectors
5 GA5048900 Gold Female socket for Raven Loom Connectors
GA5020785 Male loom connector 37 pin (not shown)
GA5020780 Female loom connector 37 pin (not shown)
GA5020560 Backing Shell 37 pin connector (not shown)
104 - Prairie Eco Parts Manual - Rev 1.0
Electrical Connectors
A B
C D
E F
G H
I J
Chapter 15 - Electrics - 105
Electrical Connectors
K L M
ITEM NO PART NO DESCRIPTION
A GA5001351 Male 2 Pin Plug
B GA5007381 Female 2 Pin Plug
C GA5002211 Male 3 Pin Plug
D GA5048550 Female 3 Pin Plug
E GA5007385 Male 4 Pin Flat Plug
F GA5007383 Female 4 Pin Flat Plug
G GA5004009 Male 6 Pin Plug
H GA5002663 Female 6 Pin Plug
I GA5049000 Male 4 Pin Square Plug
J GA5050805 Female 4 Pin Square Plug
K GA5016619 Female Type Socket
L GA5014857 Rubber Seal (Green)
M GA5016617 Male Type Pin
106 - Prairie Eco Parts Manual - Rev 1.0
Deutsch Electrical Connectors
Deutsch Part Number Breakdown
HD 34/36 - 18/24 - 14/24/47 - PN/SN
Series 34- Jam Nut Type Shell Size Number of Pins PN- Pins
36- Screw Type SN- Sockets
Item Part No Description A
A GA5061225 16GA Female Deutsch Socket
B GA5061270 12GA Female Deutsch Socket
Item Part No Description A
A GA5061240 16GA Male Deutsch Pin
B GA5061260 12GA Male Deutsch Pin
Chapter 15 - Electrics - 107
Deutsch Electrical Connectors
Item Part No Description
A GA5002671 HD34-18-14PN Connector
A B
B GA5002675 HD34-24-21PN Connector
Item Part No Description B
A GA5002663 HD36-18-14SN Connector A
B GA5002655 HD36-24-21SN Connector
Part No Description
GA5062635 HD34-24-47-PE Connector(47 Socket)
GA5061225 Small Male Socket
GA5061260 Large Male Socket
Part No Description
GA5062640 HD36-24-47-SE-059 Connector(47 Pin)
GA5061210 Small Female Pin
GA5061230 Large Female Pin
Part No Description
GA5021310 HD36-24-19SN-059 Connector 19 socket
Part No Description
GA5021315 HD34-24-19PN Connector 19 pin
108 - Prairie Eco Parts Manual - Rev 1.0
Deutsch Electrical Connectors
Part No Description
GA5020920 Plug for size 24 Connector with External Thread on Plug
GA5020910 Plug for size 18 Connector with External Thread on Plug
Part No Description
GA5020925 Plug for size 24 Connector with External Thread on Connector
GA5020915 Plug for size 18 Connector with External Thread on Connector
Item Part No Description
B
A GA5012399 Connector Lock Nut suit 24 shell
GA5009887 Connector Lock Nut suit 18 shell
B GA5017621 Connector Lock Washer suit 24 shell
A
GA5009893 Connector Lock Washer suit 18 shell
Item Part No Description
A GA5013783 Housing (4 Pin) B
B GA5061240 Pin
C GA5050765 Lock Wedge C
Chapter 15 - Electrics - 109
Boom Lights Mount
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4522570 Boom light mounting bracket 2
2 GA5000115 Washer flat SS 10mm 8
3 GA5000141 M10 Nyloc Nut 4
4 GA5065455
Bolt Gr8.8 M10x30 4
5 GA5050105
Flood light Stingray (no plug)
2
6 GA5004883 Washer 8mm SS 2
7 GA5051700 M8 Nyloc Nut 2
110 - Prairie Eco Parts Manual - Rev 1.0
Console Mounting Kit
GA4903666 Complete console mounting kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5020825 Universal Standard Mount RAM 101 1
2 GA4522930 Tractor controller ram mount bracket 1
3 GA4523475 Loom support plate suit 440 and 4400 1
4 GA4523935 Control box dual mounting plate 1
5 GA5003976 M5 x 20mm Pan head Screw 5
6 GA5003983 M5 washer ss 8
7 GA5003975 M5 Nyloc nut SS 8
8 GA5051230 Set Screw M5 x 16 Countersink SS 3
Chapter 15 - Electrics - 111
Control Boxes
For switchbox decals refer to
chapter 17 “Decals”
SWITCH PART NUMBERS
On/Off switch GA5012671
On/Off/On GA5012673
Mom On/Off/ Mom On GA5060410
Blank insert GA5006421
Steering Calibrate switch GA5075180
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5068930 RAM-B-138 1
2 GA5075100-02 Switch box 2011 top 1
3 GA5075100-01 Switch box 2011 Base 1
4 GA5003083 M3 x 12mm screw SS 4
5 GA5049465 M3 Nyloc nut SS 4
6 GA5003977 Bolt M5 x 16 Pan Head SS 2
7 GA5003983 M5 Washer SS 2
8 GA5003975 M5 Nyloc nut SS 2
9 GA5075105 Screw Phillips Head 8G 1-1/2 inch Pan self tapping s/s 6
10 GA5060242 Hyd functions/base sprayer control box loom 1
112 - Prairie Eco Parts Manual - Rev 1.0
Electrical Layout - Overview
Chapter 15 - Electrics - 113
Electrical Layout - Overview
114 - Prairie Eco Parts Manual - Rev 1.0
Chapter 15 - Electrics - 115
Chapter 16
SCHEMATICS
Fresh Water Delivery
Chapter 16 - Schematics - 116
Pressure Schematic
Chapter 16 - Schematics - 117
Pneumatic Schematic
118 - Prairie Eco Parts Manual - Rev 1.0
Chapter 16 - Schematics - 119
Chapter 17
DECALS
NOTE: Decals fitted will depend on which options are to the sprayer. Not all decals shown here will be fitted.
1 2
GA5015991 EVO
GA5015991 EVO
GA5062430 EVO GA5062430 EVO
GA204 EVO
Bi-fold right Bi-fold left OFF GREASE GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GA222 EVO
GREASE GREASE GA222 EVO
GREASE GREASE GA222 EVO GA222 EVO
GREASE GREASE GREASE GREASE GREASE GREASE GREASE GREASE GREASE
KEEP ME OILED
KEEP ME OILED
FOR SMOOTH
FOR SMOOTH
OPERATION
OPERATION
GA222 EVO GA222 EVO GA222 EVO GA222 EVO
Fill Pump GA222 EVO
GREASE GREASE GREASE GREASE GA222 EVO GA222 EVO GA222 EVO
GA006 EVO
GREASE GREASE GREASE GREASE GREASE
GA222 EVO GA222 EVO
GREASE GREASE GA5015971 EVO
ON
GA5062870 EVO
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
KEEP HANDS CLEAR KEEP HANDS CLEAR
CHECK WHEEL NUTS
FOAM & AIR BAG FILTER
Do not run
DRAIN
Spray pressure
Vertical dimension to be 17-18mm
Vertical dimension to be 17-18mm
pump dry as
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE GREASE GREASE
GA5015991 EVO
GA5015991 EVO
damage will
ONLY
drain valve
occur!
suction
GA006 EVO
Goldacres Tri-Tech boom - Number 1 for stability
Pump
GREASE GREASE GREASE GREASE GREASE GREASE GREASE GREASE
CHECK WHEEL NUTS
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GA222 EVO GA222 EVO GA222 EVO
KEEP HANDS CLEAR KEEP HANDS CLEAR
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE GREASE GREASE GA222 EVO
GREASE GREASE GREASE GA222 EVO GA222 EVO
17-18mm
17-18mm
Transcal
GA5015991 EVO
GA5015991 EVO
GA5061900
water
Rinse
tank
GA210 EVO
2. Always relieve any residual vacuum
1. Do not hold vacuum in the tank for
shape of the tank my be affected.
extended perios of time or the
GA5062485 EVO
from the tank immediately after use.
GREASE GREASE GREASE GREASE GREASE
DO NOT STAND ON THIS Foam GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE
GA5063370 GA5063370
Marker
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
PLATFORM OR STEPS GREASE GREASE GREASE GREASE GREASE GA222 EVO
GREASE
The nozzles supplied with this boom may not suit all chemical
The nozzles supplied with this boom may not suit all chemical
applications. Always ensure that the nozzles fitted match the
applications. Always ensure that the nozzles fitted match the
recommended spray quality as stated on the chemical label.
recommended spray quality as stated on the chemical label.
When the sprayer is in motion KEEP HANDS CLEAR KEEP HANDS CLEAR
or the booms are being folded
or unfolded concentrate Lower steps before GREASE GREASE GREASE GREASE GREASE
GA5062090 EVO
DO NOT ENTER TANK
winding jack handle.
DO NOT CLIMB ON TANK
GREASE GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GA208 EVO
GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE GREASE
Off
HOPPER RELEASE: NOT FOR USE WITH
GREASE GREASE
FLAMMABLE LIQUIDS
Use caution when lowering hopper
Fill
1. Support hopper with left hand. HOPPER MUST BE LOCKED GA222 EVO GA222 EVO
2. Release hopper catch with right hand. INTO RAISED POSITION
FLUSH CHEMICAL FROM EQUIPMENT IMMEDIATELY AFTER USE 3. Gently lower hopper into working position. WHEN SPRAYER IS MOVING
GA071 EVO GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO
GA222 EVO GA222 EVO
GREASE GREASE
GA207 EVO
GA5015991 EVO
GA5015991 EVO
Off
Main
tank
Aluminium - lighter, stronger, better chemical resistance
DO NOT SUPPORT SPRAYER WITH JACK UNLESS MAIN SPRAY TANK IS EMPTY
GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE GREASE GREASE
MAXIMUM SPEED WITH TANK LOADED (20km) KEEP HANDS CLEAR KEEP HANDS CLEAR
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
MAXIMUM SPEED WITH TANK EMPTY (40km)
GA5015991 EVO
GA5015991 EVO
MAXIMUM PUMP SPEED 540 RPM (To avoid pump damage)
MAXIMUM PUMP SPEED 400 RPM (To avoid pulsation whilst spraying)
Empty
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
PTO SHAFT MAY NEED TO BE ALTERED TO SUIT INDIVIDUAL TRACTOR REQUIREMENTS
THE TARE WEIGHT OF THIS SPRAYER IS APPROXIMATELY ________________kg
MAKE SURE THIS WEIGHT DOES NOT EXCEED THE TOWING CAPACITY OF THE VEHICLE
TO WHICH THIS SPRAYER IS ATTACHED. KEEP HANDS CLEAR KEEP HANDS CLEAR
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
MAKE SURE THE SPRAYER COMPLIES WITH ALL RELEVANT ROAD REGULATIONS FOR
AGRICULTURAL MACHINERY.
GA222 EVO
GA5013 EVO GREASE
DO NOT RUN PUMP DRY (To avoid pump seal damage)
STAND CLEAR
KEEP BYSTANDERS
OPERATING AREA
CLEAR OF BOOM
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
SET HYDRAULIC OIL FLOW ACCORDING TO TRACTOR HYDRAULIC SYSTEM (To avoid hydraulic seal damage)
GA5061895 EVO
REFER TO OPERATORS MANUAL TO SET CORRECT HYDRAULIC OIL FLOW
GREASE GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
GA5061825 GA222 EVO
GREASE
water delivery
tank fill ON External GREASE GA222 EVO
Main GREASE GA222 EVO
Transcal
GA5013 EVO
OFF
STAND CLEAR
KEEP BYSTANDERS
OPERATING AREA
CLEAR OF BOOM
GREASE GA222 EVO
GA222 EVO
OFF ON GREASE
GREASE
fill rinse
GA222 EVO
tank Transcal GREASE GA222 EVO
Rinse
GA5061890 EVO
Boom over ride and
speed control valve
(external water source) • NEVER WORK UNDER
HYDRAULICALLY RAISED BOOM.
rinse fill • CLOSE HYDRAULIC LIFTING
CYLINDER TO MINIMUM HEIGHT GA071 EVO
tank marker POSITION BEFORE ATTEMPTING
ANY BOOM MAINTENANCE.
Main Foam • KEEP CLEAR OF OVERHEAD
POWERLINES. CONTACT CAN
CAUSE DEATH.
• MAKE SURE SPRAYER CAN
SAFELY PASS UNDER ALL
Aluminium - lighter, stronger, better chemical resistance
ON OVERHEAD OBSTRUCTIONS.
Boom over ride and
speed control valve
OFF • DO NOT TRAVEL WITH THE
OFF BOOM IN THE FOLDED
POSITION UNTIL THE BOOM IS
LOWERED ONTO RESTS.
• BOOM MUST BE RAISED CLEAR GA5061830 EVOMY13
OF RESTS WHEN UNFOLDED
OR SERIOUS BOOM DAMAGE
GA5062085 EVO
ON MAY RESULT.
GA209 EVO
GA5061845 EVO
(Recirculate)
rinse agitation
Spray Mode 1 Fill Main Tank 1
tank • NEVER WORK UNDER
GREASE
Bypass Bypass
tank HYDRAULICALLY RAISED BOOM. 1. Move handle to Bypass
(SPRAY MODE)
Vortex
Spray mode
Chem
1. Move handle to Bypass
(SPRAY MODE)
Vortex
Spray mode
Chem
EZ Control
Main Main GA222 EVO
• CLOSE HYDRAULIC LIFTING 2. Move Fill Pump Switch 2
induction
hopper
probe
venturi
Manifold
pressure
80
2. Move Fill Pump Switch 2
induction
hopper
probe
venturi
Manifold
pressure
80
CYLINDER TO MINIMUM HEIGHT
Off 120
Off 120
60
60
to OFF to ON
600 600
Do not run pump 400 800 Do not run pump 400 800
GA222 EVO
GREASE in this position in this position
140
140
40
40
200 200
1000 1000
Fill 0 1100
Fill 0 1100
Pump Pump
mode On On
POSITION BEFORE ATTEMPTING Pressure
kPa
Pressure
0
160
0
kPa 160
psi psi
3. Move handle of Main Work
light
delivery 3. Move handle of Main Work
light
delivery
Spray Tank Agitation to ON Tank Agitation to ON
ANY BOOM MAINTENANCE. Main Main Main Main
tank tank tank tank
3
OFF agitation rinse agitation rinse
quick start guide
4. Move handle of Main 4. Move handle of Main
(Recirculate) (Recirculate)
• KEEP CLEAR OF OVERHEAD
ON ON
light Tank Fill to OFF OFF
OFF
Tank Fill to ON OFF
OFF
POWERLINES. CONTACT CAN
3
ON ON
Work
CAUSE DEATH.
Foam Main Foam Main
delivery ON
mode • MAKE SURE SPRAYER CAN
marker
fill
tank
rinse
(external water source)
GA5062060
marker
fill
tank
rinse
(external water source)
GA5062060
GREASE GREASE
Rinse Rinse
Transcal tank Transcal tank
rinse fill rinse fill
SAFELY PASS UNDER ALL
Induction ON
OFF ON
OFF
Pressure GA222 EVO
GA222 EVO
GREASE GREASE
GA222 EVO
GA222 EVO
OVERHEAD OBSTRUCTIONS. GA5062060
OFF
External
water delivery
ON
Main
tank fill 4
OFF
External
water delivery
ON
Main
tank fill 4
OFF
Pump
Fill
ON
• DO NOT TRAVEL WITH THE Foam Fill 1 Main Tank Rinse 1 Transcal Rinse 1 Main Tank Rinse 1
High Pressure
Bypass
Fresh Water
Bypass Bypass Bypass Spray mode
BOOM IN THE FOLDED
Spray mode Spray mode Spray mode
1. Move handle to Bypass 1. Move handle to Bypass
GREASE GREASE
Vortex Chem
induction probe
POSITION UNTIL THE BOOM IS (SPRAY MODE) (SPRAY MODE)
Vortex Chem Vortex Chem Vortex Chem
induction probe induction probe induction probe hopper venturi
Manifold
1. Move handle to Off
2
hopper venturi hopper venturi hopper venturi pressure
Manifold Manifold Manifold
2 1. Move handle to Bypass
2 2
pressure pressure pressure
2. Move Fill Pump Switch 2. Move Fill Pump Switch
LOWERED ONTO RESTS. (DO NOT RUN PUMP IN
80
Off
3
120
60
(SPRAY MODE)
80 80 80 600
Off 120
Off 120
Off 120 Do not run pump 400 800
60
60
60
in this position
140
GA222 EVO GA222 EVO
40
to ON to ON
600 600 600 200
THIS POSITION)
Do not run pump 400 800 Do not run pump 400 800 Do not run pump 400 800
1000
in this position in this position in this position Fill
140
140
140
0
40
40
40
200 200 200 1100
Pump
On
Pressure
Fill 1000
Fill 1000
Fill 1000
0
kPa 160
0 1100 0 1100 0 1100 psi
Pump
2. Move Fill Pump Switch
Pump Pump
• BOOM MUST BE RAISED CLEAR
On On On
Pressure
kPa
Pressure
kPa
Pressure
kPa
delivery
0 0 0
160 160 160
psi psi psi
3. Move handle of Main delivery delivery 3. Move handle of Main delivery 2. Move Fill Pump Switch
Work
light
to ON
GA222 EVO GA222 EVO GA222 EVO Work Work Work
Off GREASE GREASE GREASE OF RESTS WHEN UNFOLDED Tank Agitation to ON
4. Move handle of Main 5
light
Main
tank
agitation
Main
tank
rinse
(Recirculate)
4. Move handle of Main
light
5
Main
tank
agitation
Main
tank
rinse
(Recirculate)
Tank Agitation to ON
4. Move handle of Main
light
Main
tank
agitation
Main
tank
rinse
(Recirculate)
to OFF
Main
tank
agitation
Main
tank
rinse
(Recirculate)
OR SERIOUS BOOM DAMAGE 3. Manifold pressure
4
ON
ON
Tank Agitation to ON ON ON
Tank Fill to OFF Tank Fill to ON should read 80psi OFF
OFF
MAY RESULT.
OFF OFF OFF
OFF OFF OFF
5. Move handle of Main
5. Move handle of Foam 5. Move handle of Transcal
ON
4. Move handle of Main
GA209 EVO
3 3 3
ON ON ON
Tank Fill to ON Foam Main
Marker Fill to ON Rinse to ON
marker tank
Tank Rinse
Foam Main Foam Main Foam Main
marker tank marker tank marker tank fill rinse GA5062060
fill rinse fill rinse fill rinse (external water source)
6. Move handle of Main
GA5062060 GA5062060 GA5062060
(RECIRCULATE) to ON
(external water source) (external water source) (external water source)
Rinse Tank Rinse (EXTERNAL Rinse Rinse Transcal
Rinse
tank
Transcal tank Transcal tank Transcal tank 5. Move handle of Main rinse fill
rinse fill
WATER SOURCE) to ON rinse fill rinse fill
pressure Tank Fill to OFF OFF
5
ON
ON
OFF ON
OFF ON
OFF
OFF
Main
5
OFF
4
OFF
4
OFF
External
Main
tank fill External
Main
tank fill External
Main
tank fill 4 External
water delivery
ON tank fill
KEEP HANDS AND BODY AWAY FROM THIS AREA WHEN
KEEP HANDS AND BODY AWAY FROM THIS AREA WHEN
ON ON ON
water delivery water delivery water delivery
CRUSHING HAZARD
CRUSHING HAZARD
Manifold
WHEELS ARE BEING TURNED. CRUSHING MAY CAUSE
WHEELS ARE BEING TURNED. CRUSHING MAY CAUSE
WHEN PERFORMING MAINTENANCE AROUND
WHEN PERFORMING MAINTENANCE AROUND
AND CLOSE VALVE ON STEERING CYLINDER.
AND CLOSE VALVE ON STEERING CYLINDER.
THIS AREA ALWAYS SHUT ENGINE DOWN
THIS AREA ALWAYS SHUT ENGINE DOWN
venturi hopper
1 1 1
SERIOUS INJURY OR DEATH.
SERIOUS INJURY OR DEATH.
probe induction Use Hopper Bypass
Spray mode
Use Probe DCI Transcal Bypass
Spray mode
Set System Pressure Bypass
Spray mode
1 Fill Fresh Water Tank Bypass
Spray mode
1. Move handle to Vortex 1. Move handle to Chem 1. Move handle to Off 1. Move handle to Bypass
Chem Vortex Induction Hopper
Vortex
induction
hopper
Chem
probe
venturi
Manifold
Probe Venturi
Vortex
induction
hopper
Chem
probe
venturi
Manifold
(DO NOT RUN PUMP IN
Vortex
induction
hopper
Chem
probe
venturi
Manifold
(SPRAY MODE)
Vortex
induction
hopper
Chem
probe
venturi
Manifold
2 2 THIS POSITION)
2 2
pressure pressure pressure pressure
2. Move Fill Pump Switch Off
80
2. Move Fill Pump Switch Off
80 80
2. Move Fill Pump Switch 80
3
Off
3
Off
3
120 120 120 120
60
60
60
60
to OFF to OFF 2. Move Fill Pump Switch to ON
600 600 600 600
Do not run pump 400 800 Do not run pump 400 800 Do not run pump 400 800 Do not run pump 400 800
in this position in this position in this position in this position
140
140
140
140
40
40
40
40
200 200 200 200
1000 1000 1000 1000
Fill 0 1100
Fill 0 1100
Fill 0 1100
Fill 0 1100
Pump Pump Pump Pump
to OFF
On On On On
Pressure
kPa
Pressure
kPa
Pressure
kPa
Pressure
0
160
0
160
0
160
0
kPa 160
psi psi psi psi
3. Manifold pressure delivery 3. Manifold pressure delivery delivery 3. Move handle of Main delivery
GREASE
Work Work Work Work
light light light light
should read 80psi Main
tank
Main
tank should read 80psi Main
tank
Main
tank 3. Manifold pressure Main
tank
Main
tank Tank Agitation to ON Main
tank
Main
tank
4
rinse rinse rinse rinse
minimum agitation (Recirculate)
4. Move handle of Main
agitation (Recirculate)
should read 110psi agitation (Recirculate)
4. Move handle of Main
agitation (Recirculate)
ON ON ON ON
GA222 EVO 4. Move handle of Main OFF
OFF
Tank Agitation to ON OFF
OFF
4. Move handle of Main OFF
OFF
Tank Fill to OFF OFF
OFF
Tank Agitation to ON 5. Move handle of Main Tank Fill to OFF 5. Move handle of Rinse
4 3
ON ON ON ON
5. Move handle of Main Foam Main
Tank Fill to OFF Foam Main Foam Main
Tank Fill to ON Foam Main
GA222 EVO
GREASE Tank Fill to OFF
marker
fill
tank
rinse
(external water source)
GA5062060
marker
fill
tank
rinse
(external water source)
GA5062060
marker
fill
tank
rinse
(external water source)
GA5062060
marker
fill
tank
rinse
(external water source)
GA5062060
Rinse Rinse Rinse Rinse
Transcal tank Transcal tank Transcal tank Transcal tank
GA5062456 EVO GA5062456 EVO rinse fill rinse fill rinse fill rinse fill
5
ON
OFF ON
OFF ON
OFF ON
OFF
OFF
5
OFF
5
OFF
4
OFF
Spray mode External
water delivery
ON
Main
tank fill External
water delivery
ON
Main
tank fill External
water delivery
ON
Main
tank fill External
water delivery
ON
Main
tank fill 4
Bypass
GREASE
GA5061825 EVO-MY13
GA222 EVO
GREASE
GA222 EVO
GREASE GA222 EVO Vortex Induction
GA5062095 EVO
GA222 EVO
GREASE
• If operated incorrectly, this machine could cause serious injury or death. For safety procedures, read the operators manual.
EVO
475 • Stop engine and remove the ignition key from the tractor before working on this machine.
GA5
062 • Do not start the machine without ensuring all people are well clear of working parts.
• Sound the horn of the tractor before start up.
Fl u
GR
SE
GA2
EA
High pressure fluid hazard
22
EVO
sh
To prevent serious injury or death from escaping hydraulic fluids:
EVO
EA
SE
22
GA2
• Visually check all hydraulic hoses before applying pressure.
Spray pressure
GA5062870 EVO
FOAM & AIR BAG FILTER
GR
• Relieve system pressure before maintenance or disconnecting hydraulic lines.
Wa t
drain valve
Please use relevant safety protection clothing and equipment. Refer to chemical manufacturers requirements.
GREASE
er Only
SMARTBOX INPUT Agricultural chemicals can be dangerous. Improper selection or use can seriously injure persons, animals, plants, soil or other property.
GA220 EVO
GA5062870 EVO
FOAM & AIR BAG FILTER Three Tier System GA222 EVO
m ar k er
Drain Open Be Safe
KEEP ME OILED
KEEP ME OILED
FOR SMOOTH
FOR SMOOTH
• Select the right chemical for the job.
GA222 EVO
GREASE
OPERATION
OPERATION
Main Tank • Handle chemicals with care.
wa
• Follow the instruction on the container label and of the equipment manufacturer.
Fo a m
BOOM SECTIONS 1-5
• Always wear protective clothing.
BOOM SECTIONS 6-10
GA5061900
ter
Closed
GA212 EVO
GREASE GREASE GA222 EVO GA222 EVO
GA5062470 EVO GA222 EVO
GREASE GREASE GA222 EVO
1. Read chemical manufacturers WARNINGS, instruction, and precautions and follow them exactly.
2. Avoid exposure to chemicals and spray drift, keep bystanders away.
3. Inspect and secure all guards before spraying.
GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO
4. Keep hands, feet, hair and clothing away from moving parts.
5. Do not allow persons to ride on sprayer.
6. Keep all chemical and hydraulic lines, fittings and couplers tight and free of leaks before starting
GA222 EVO
GREASE GREASE GREASE GA222 EVO GA222 EVO
and operating.
7. Review safety instructions and safety devices with all operators regularly.
8. Do not fill tank or operate boom when not attached to tractor.
GREASE GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO GA222 EVO
FLUSH CHEMICALS FROM
GA222 EVO
GREASE GREASE GREASE GREASE GA222 EVO GA222 EVO GA222 EVO
EQUIPMENT IMMEDIATELY
AFTER USE
GREASE GREASE
GA222 EVO GA222 EVO
CLEAN AIR
GREASE GREASE GREASE
GREASE GREASE
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
FILTER DAILY
GREASE GA222 EVO
GA222 EVO
GREASE GREASE
GA222 EVO GA222 EVO
GREASE GA222 EVO GA222 EVO
GREASE GREASE
GREASE GA222 EVO
GA5061885 EVO
GREASE GREASE GREASE
GA222 EVO
GREASE GA222 EVO GA222 EVO
GA222 EVO GA222 EVO GA222 EVO GREASE GREASE
GA222 EVO
GREASE GREASE GREASE GA222 EVO GA222 EVO
GREASE GREASE
GA222 EVO GA222 EVO
GA222 EVO
GREASE
GREASE GREASE GREASE GREASE GREASE GREASE
GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO
GA222 EVO GA222 EVO GREASE GREASE GREASE GREASE GREASE GA222 EVO GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE
GA222 EVO
GREASE GREASE GREASE GA222 EVO GA222 EVO
GA222 EVO GA222 EVO GA222 EVO
o
GA5064500
GA5064500
GREASE GREASE
t tw
GA222 EVO
GREASE GREASE GREASE
OPEN
OPEN
GA222 EVO GA222 EVO
Pro d u c
GA222 EVO GA222 EVO
GA222 EVO GA222 EVO
CLOSED
CLOSED
GREASE GREASE
GREASE GREASE GREASE
GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO 0
6477
GREASE GREASE GREASE
GA222 EVO GA222 EVO GA222 EVO GA50
GREASE GREASE GREASE GA222 EVO GA222 EVO
GA222 EVO GA222 EVO GA222 EVO
GA222 EVO GA222 EVO
GREASE GREASE
GREASE
DRAIN DRAIN
GA222 EVO GA222 EVO GA222 EVO
GREASE GREASE GREASE
ne
GA222 EVO
to
GA222 EVO
GREASE
Pro d u c
ONLY ONLY
GA5015971 EVO
GA5015971 EVO
GA5064775
Chapter 17 - Decals - 120
3
4 5 6
7
9
10 11
ITEM NO. PART NUMBER DESCRIPTION QTY.
3 GA208EVO Warning Hopper 1
4 GA209EVO Danger/Caution 2
5 GA210EVO Warning Platform 1
6 GA222EVO Grease 57
7 GA212EVO Main Tank Drain 1
8 GA5061900EVO Spray Pressure Drain 2
9 GA5015991EVO Keep Hands Clear 8
10 GA220EVO Three Tier System 1
11 GA5013EVO Danger/Stand Clear 2
Chapter 17 - Decals - 121
12A
12B
13
16 14 15
17
19
18
ITEM NO. PART NUMBER DESCRIPTION QTY.
12A GA5064770 Dual Product Spray Pressure/Air pressure
1
12B GA5064775 Main spray pressure/Air pressure
13 GA006EVO Warning Check Wheel Nuts 2
14 GA5015971EVO Drain Only 1
15 GA5062090EVO Caution - Lower Steps 1
16 GA204EVO Fill Pump 1
17 GA5062430EVO 3D Breakaway Adjustment 2
18 GA207EVO Warning 1
19 GA5062456 Warning Crush Hazard 2
122 - Prairie Eco Parts Manual - Rev 1.0
20 21
23
22
24 25
26 27
ITEM NO. PART NUMBER DESCRIPTION QTY.
20 GA5062475 Flush Water Only 1
21 GA5062485EVO Foam Marker Concentrate 1
22 GA5062085EVO Transcal 1
23 Keep Me Oiled 2
24 GA5062095EVO Vortex 1
25 GA5062870 Foam & Airbag Filter 1
26 GA5063370 Warning Nozzles 2
27 GA5062470 Foam Marker Water 1
Chapter 17 - Decals - 123
28
ITEM NO. PART NUMBER DESCRIPTION QTY.
28 GA5061825 Pod Taps 1
124 - Prairie Eco Parts Manual - Rev 1.0
29
ITEM NO. PART NUMBER DESCRIPTION QTY.
29 GA5061830EVOMY13 Left Hand Pod Outer 1
Chapter 17 - Decals - 125
30
ITEM NO. PART NUMBER DESCRIPTION QTY.
30 GA5061845 Prairie EVO Left Hand POD Door Inner 1
126 - Prairie Eco Parts Manual - Rev 1.0
31
32
33
34
ITEM NO. PART NUMBER DESCRIPTION QTY.
31 GA5061885 Goldacres 1
32 GA5061890EVO Tri-Tech #1 for Boom 1
33 GA5061895EVO Transcal 1
34 GA5065195 Prairie Evolution Tank Decal - 6530 2
GA5065190 Prairie Evolution Tank Decal - 6533 2
GA5065085 Prairie Evolution Tank Decal - 6536 2
Chapter 17 - Decals - 127
Steer crab Steering Foam Foam Dual product Boom recirc
LEFT ON ON LEFT ON ON
RIGHT OFF OFF RIGHT OFF OFF
Steer crab Steering Foam Foam Dual product Boom recirc
Switch Box - C
Part # GA4903720
2nd product Boom recirc Foam Foam Boom lights Fenceline left
ON ON ON LEFT ON ON
OFF OFF OFF RIGHT ON ON
2nd product Boom recirc Foam Foam Beacon Fenceline right
128 - Prairie Eco Parts Manual - Rev 1.0
Chapter 18
HYDRAULICS
Boom Lower Solenoid
ITEM NO. PART NUMBER DESCRIPTION
QTY.
1 GA5047344 Hyd Soleniod boom lower 1
2 S75-0806 1/2 BSPT 3/8 BSPP Hyd Nipple 2
3 GA5004437 M6 SS Washer 4
4 GA5004447 M6 Spring washer SS 2
5 GA5004081 M6x40 bolt 2
6 GA5017393 Valve speed control 1/2 offset
1
7 S27-0808
0808 BSPTM BSPMT nipple
1
Chapter 18 - Hydraulics - 129
Load Sense Turbo Valve
GA4902590 Complete Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
GA5047677 Load sense turbo valve 1
R81-08M 08 BSPFF Male Tip/Poppet 2
R81-08P 08 BSPPF FQRC/Poppet/Push Pull 2
S75-0408 0408 Nipple 2
S50-080808 080808 BSPTM BSPTM Tee 1
T202-0808 0808 BSPP female 2
T202-0404 0404 BSPP female 2
S75-0808 0808 Nipple BSPTM BSPPOM 1
S77-0404 Elbow 0404 90° BSPTM BSPPOM 1
S24-0804 Bush reducing BSPT x BSPT 1
868AA012000WOORL Hydraulic hose 1/2” - 1m 1
GA5049695 Hydraulic hose 1/4” - 1m 1
130 - Prairie Eco Parts Manual - Rev 1.0
Quick Release Couplings
1/2” Hydraulic Lines
ITEM PART NO DESCRIPTION
1 R81-08M 1/2” BSPP Female Push/Pull
Quick Release Coupling
1/4” Hydraulic Lines
ITEM PART NO DESCRIPTION
1 R81-08M 1/2” BSPP Female Push/Pull
Quick Release Coupling
2 S27-0804 1/2” BSPT - 1/4” BSPT Straight
Hydraulic Nipple
Hydraulic Pump Lines
ITEM PART NO DESCRIPTION
1 R81-08M 1/2” BSPP Female Push/Pull
Quick Release Coupling
2 36B-08 1/2” Retaining Washer
3 RO-BP08 1/2” Hydraulic O-Ring
4 35B-08 1/2” BSPP Lock Nut
Note: Plastic Cover for when fittings are not in use is available Part No: GA5052365
Hydraulic Hoses
PART NO DESCRIPTION
GA5067925 1/4” Hydraulic Hose, Tractor to fold cylinders
GA5067930 1/2” Hydraulic Hose, Tractor to Boom Lower Solenoid
GA5067940 1/2” Hydraulic Hose, Accumulator manifold to lift cylinders
GA5067945 1/4” Hydraulic Hose, Tractor to tilt cylinders
Chapter 18 - Hydraulics - 131
Hose ID Tags
PART NO DESCRIPTION
F71023A Fold In Tag
F71024A Fold Out Tag
F71025A Boom Raise Lower Tag
F70134A Tilt Left Tag
F70135A Tilt Right Tag
F71018A Bi-Fold In Tag
F71019A Bi-Fold Out Tag
F71020A Pressure Tag
F71021A Tank Tag
F71022A Load Sense Tag
F71026A Brakes Tag
Hydraulic O-Rings and Retaining Washers
ITEM PART NO DESCRIPTION
1 36B-04 1/4” Retaining Washer
36B-06 3/8” Retaining Washer
36B-08 1/2” Retaining Washer
36B-12 3/4” Retaining Washer
2 RO-BP04 1/4” Hydraulic O-Ring
RO-BP06 3/8” Hydraulic O-Ring
RO-BP08 1/2” Hydraulic O-Ring
RO-BP12 3/4” Hydraulic O-Ring
00835 Ball valve hydraulic 1/2" FF 1
812 Elbow 90deg 1/2" BSP x 3/4" 1
UNO
Hydraulic Cylinder - Boom Lift
2 3 4 5 6 7
PART NUMBER DESCRIPTION Default/
QTY.
5065051-outer 1
5012203 Grease Nipple 1/4" UNF Short 2
5065051-pineye 1
2 ITEM NO. PART NUMBER DESCRIPTION QTY.
8A Restrictor Nipple 1/4 BSPT to 3/4 1 Cylinder 2.5” Bore, 2” Rod, 21” Stroke
1 UNO 1.5mm
GA5070082
orifice Hydraulic 1
-0412 Nipple
2 1/4" x 3/4" c/w
GA5065487 O-RING 1
1" ID, 1.125" OD glacier bush, 1" long 4
-BP08 1/2" BSPP O-Ring 1
3 GA5012203 Grease Nipple 1/4" UNF Short 2
4 GA5000835 Ball valve hydraulic 1/2" FF 1 REV NO CHANGE
5 S89-0812 Elbow 90deg 1/2" BSP x 3/4" UNO 1
- GA5052760 Hydraulic cylinder seal kit -
GOLDAC
TITLE:
Hydraulic Cylinder - Wing Tilt Hydraulic cylinder - 2.5" bor
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 4/08/2003 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Coen
Boom lift ram assy - Prairie M
DATE EDITED: MATERIAL:
3 1 19/11/2012
2 3
2 4 Matt DO NOT SCALE DRAWING SCALE:1:5
6 5
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5065051 Hydraulic Cylinder 3.5”x5” stroke 1
2 GA5012203 Grease Nipple 1/4" UNF Short 2
3 GA5052762 Adjusting rod end c/w nut and ball 1
4 L068A Restrictor Nipple 1/4 BSPT to 3/4 UNO 1.5mm orifice 1
5 S93-0412 Nipple 1/4" x 3/4" c/w O-RING 1 REV NO CHANGE
6 RO-BP08 1/2" BSPP O-Ring 1
GOLD
- GA5052730 Hydraulic Cylinder seal kit -
TITLE:
Hydraulic cylinder 3.5"
Chapter 18 - Hydraulics - 133
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 14/05/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES RR
GA5065051
DATE EDITED: MATERIAL:
5/12/2012
2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:5
1 2 3 4 5 6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5065051 Hydraulic cylinder 3.5"x5" stroke 1
2 S93-0412 Nipple 1/4" x 3/4" c/w O-RING 1
A
3 L068A Restrictor Nipple 1/4 BSPT to 3/4 1
UNO 1.5mm orifice
4 RO-BP08 1/2" BSPP O-Ring 1
Hydraulic Cylinder - Wing Tilt
5
1
C
4
3
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5065051 Hydraulic cylinder 3.5"x5" stroke 1
2 S93-0412 Nipple 1/4" x 3/4" c/w O-RING 1
1-3 MORANG C
3 L068A Restrictor Nipple 1/4 BSPT to 3/4 UNO 1.5mm orifice 1
GOLDACRES MITCHELL PARK
PH: 03 53426399
D
4 GA5001067 1/2" BSPP O-Ring TITLE:
1 FAX: 03 5342630
5 GA5012203 Grease Nipple 1/4” UNF Short
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS 26/07/2012
DATE CREATED:
2
DEBUR ALL EDGES DRAWN:
DWG NO:
REV NO -
CHANGE GA5052730 Hydraulic Cylinder seal kit
APPL DATE
DATE EDITED: Name
MATERIAL:
-
Wing tilt cylinder - CCSP MY11
26/07/2012
Matt
1
- GA5052761
2
Adjusting rod end with nut andDO NOT
bushes (spare part)
SCALE DRAWING SCALE:1:5 - SHEET 1 OF 1
1 2 3 4 5 6
Hydraulic Cylinder - Yaw
A A
B B
C C
ITEM NO. PART NUMBER DESCRIPTION 1-3 MORANG CR
QTY.
1 GA5060817 Hydraulic yaw cylinder 2” x 1 1/4” x 117 .5 GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
D
2 GA5067605 Bearing GEG 30 ES 2RS 2
TITLE:
Hydraulic yaw cylinder 2" bore
DATE CREATED:
UNLESS OTHERWISE SPECIFIED:
21/04/2009
DIMENSIONS ARE IN MILLIMETERS
REV NO
3
CHANGE
GA5067610 APPL DATE Bearing Retaining
DATE EDITED:
19/11/2012
clip
DEBUR ALL EDGES
T.Wattsset (2 per set)
UNTOL. DIMENSIONS
OPEN DIM
DRAWN:
GA5060817
± 0.20 MATERIAL:
A42
DWG NO:
David ONE DEC. PL. ± 0.10
1 4 GA5012203
2 Grease Nipple 1/4” UNF Short
TWO DEC. PL. ± 0.05
ANGULAR ± 0°30' DO NOT SCALE DRAWING 2
SCALE:1:2.5 SHEET 1 OF 1
5 GA5067600 Bearing Bush - Small 4
- GA5052745 Cylinder Seal Kit -
134 - Prairie Eco Parts Manual - Rev 1.0
1 2 3 4 5 6 7
Hydraulic Cylinder - Boom Fold RH
3 2
5 1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018538 Hydraulic Cylinder 3” x 18” x 1.25” (external phasing) 1
2 GA5067600 Bearing Bush - Small 3
1 2
3 GA5067605
3
Bearing GEG
4
30 ES 2RS 5 6
2 7
4 GA5067610 Bearing Retaining clip set (2 per set) 2
5 GA5012203 Grease Nipple 1/4” UNF Short 2
6 GA5067595 Bearing Bush - Large 1 REV NO CHANGE
7 L068A 1 GOLDACRES
- GA5052685 Hydraulic Cylinder seal kit - TITLE:
Phasing cylinder 3x18x1.25 (extern
Hydraulic Cylinder - Boom Fold LH UNLESS OTHERWISE SPECIFIED
DATE CREATED:
29/09/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Luke M
GA5018538
3 2 DATE EDITED:
19/11/2012
MATERIAL:
1 2 3 4 David DO NOT SCALE DRAWING SCALE:1:5 SHE
4 1
7
5
6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018542 Hydraulic Cylinder 3.25” x 18” x 1.25” (external phasing) 1
2 GA5067600 Bearing Bush - Small 3
3 GA5067605 Bearing GEG 30 ES 2RS 2
4 GA5067610 Bearing Retaining clip set (2 per set) 2
5 GA5012203 Grease Nipple 1/4” UNF Short 2
6 GA5067595 Bearing Bush - Large 1
7 GA5022423 Relief Valve suit 3.25” phasing cylinder (spare part) -
REV NO CHANGE
- GA5052685 Hydraulic Cylinder seal kit - GOLDACRES
TITLE:
Chapter 18 - Hydraulics - 135cylinder 3x18x1.25 (external
Phasing
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 29/09/2010 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
DEBUR ALL EDGES Luke M
GA5018542
DATE EDITED: MATERIAL:
19/11/2012
1 2 3 4 Matt DO NOT SCALE DRAWING SCALE:1:5 SHEET 1
Hydraulic Schematic
136 - Prairie Eco Parts Manual - Rev 1.0
Chapter 18 - Hydraulics - 137
Chapter 19
FILTRATION & HOSE
3/4 BSP Filter with 200 mesh screen
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 CPB50492-3/4-PP AAB126 Filter body 1
2 CPB50493-PP AAB126 filter bowl 1
3 CP50494 AAB126 Filter bowl o-ring (square) 1
4 CP16903-7-SSPP 200 Mesh Screen for foam marker (Orange) 1
Chapter 19 - Filtration & Hose - 138
Pressure Filter Assembly
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 AAB126ML-F75-80 Flange filter with 80 Mesh screen 1
CP15941-4-SSPP 80 Mesh Screen (Blue) 1
2 AAB126ML-F75-100 Flange filter with 100 Mesh screen 1
CP15941-5-SSPP 100 Mesh Screen (Green) 1
3 GA5009335 Gasket Kamlock Nitrile 1 1/2 FIT150 3
4 FC200 Screw clamp 3
5 M200125BRB 1 1/4" Hose barb to flange 2
6 GA5004883 Washer 8mm SS 8
7 GA5011503 M8 x 140mm Bolt 4
8 GA5004917 M8 Nyloc Nut 4
9 CP48656 Pressure Filter bowl o-ring (square) 2
Chapter 19 - Filtration & Hose - 139
2” Fill Filter with 120 mesh screen
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 C00002066 Filter housing 1
2 C00201031 Filter bowl 1
3 3290003030 50 mesh screen 1
4 GA5001329 Filter seal 2
5 GA5012545 Filter O ring 1
6 GA5000421 120 mesh screen 1
140 - Prairie Eco Parts Manual - Rev 1.0
3 4 5 6 7 8
DESCRIPTION QTY.
ne filter mount plate bolt 1
on A
SP filter with 200 Mesh 2
screen
Washer 8mm SS HD 8
M8x90 Bolt 4
M8 Nyloc Nut
In Line Boom Filter
0x50 Square Top U bolt
4
2
M12 WASHER 4
M12 Nyloc nut Z/P 4
barb elbow 3/4" thread 4
3/4" barb B
9
D
3
REV NO CHANGE DATE ECN NO.
5 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
In Line Boom Filter Bolt On Assem
DATE CREATED:
UNLESS OTHERWISE SPECIFIED 21/08/2012 DWG NO.
DIMENSIONS ARE IN MILLIMETERS DRAWN:
GA4906020 A3
ITEM NO. PART NUMBER DESCRIPTION
DEBUR ALL EDGES Coen
MATERIAL:
QTY.
DATE EDITED:
3 1 GA4505205
4 Boom line filter mount plate bolt on
4/09/2012
Matt DO NOT SCALE DRAWING SCALE:1:2
1
SHEET 1 OF 1
2 AAB126ML-3-200 3/4 BSP filter with 200 Mesh screen 2
3 GA5048115 Washer 8mm SS HD 8
4 GA5011495 M8x90 Bolt 4
5 GA5004917 M8 Nyloc Nut 4
6 GA5011243 M12x50x50 Square Top U bolt 2
7 GA5000587 M12 WASHER 4
8 GA5012461 M12 Nyloc nut Z/P 4
9 HB075-90 hose barb elbow 3/4" thread 3/4" barb 4
Chapter 19 - Filtration & Hose - 141
2” Suction Filter
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 316070.010 317 filter body 1
2 317000.020 317 filter bowl 1
3 316000.040 317 filter nut 1
4 317002.030 32 Mesh Screen (White) 1
Air Filter
PART NO DESCRIPTION
GA5005259 Air Filter Housing & Element
GA5049460 Air Filter Element
142 - Prairie Eco Parts Manual - Rev 1.0
Hose Clamps
PART NO DESCRIPTION
GA5004865 8-16mm Hose Clamp
GA5000469 12-20mm Hose Clamp
GA5000299 16-25mm Hose Clamp
GA5001681 20-32mm Hose Clamp
GA5002783 30-45mm Hose Clamp
GA5002873 32-50mm Hose Clamp
GA5003325 40-60mm Hose Clamp
50-70/12W3 50-70mm Hose Clamp
GA5004241 60-80mm Hose Clamp
Cable Ties
PART NO DESCRIPTION
GA5002173 Cable tie, black, 100x2.5mm
GA5003517 Cable tie, black, 140x3.5mm
GA5004455 Cable tie, black, 190x4.5mm
GA5000685 Cable tie, black, 320x7.5mm
GA5000687 Cable tie, black, 360x4.5mm
GA5021235 Cable tie, black, 540x7.5mm
Chapter 19 - Filtration & Hose - 143
Hoses
Suction Hose
Part No Description Internal Diameter (A) Outside Diameter (B)
HOS20S 20mm Suction Hose 20mm 32mm
HOS25S 25mm Suction Hose 25mm 35mm
HOS32S 32mm Suction Hose 32mm 45mm
HOS38S 38mm Suction Hose 38mm 48mm
HOS51S 51mm Suction Hose 51mm 63mm
HOS63S 63mm Suction Hose 63mm 76mm
HOS75S 75mm Suction Hose 75mm 93mm
Suction hose can be defined by its external green stripe and wire reinforcement
Pressure Hose
Part No Description Internal Diameter (A) Outside Diameter (B)
HOS7P 7mm Pressure Hose 7mm 12.5mm
HOS13P 13mm Pressure Hose 13mm 20mm
HOS20P 20mm Pressure Hose 20mm 28mm
HOS25P 25mm Pressure Hose 25mm 34mm
HOS32P 32mm Pressure Hose 32mm 43mm
HOS38P 38mm Pressure Hose 38mm 48mm
Pressure hose can be defined by its blue internal layer
PVC Hose
Part No Description Internal Diameter (A) Outside Diameter (B)
HOS25PVC 25mm PVC Hose 25mm 32mm
HOS40PVC 40mm PVC Hose 40mm 50mm
HOS50PVC 50mm PVC Hose 50mm 58mm
PVC hose can be defined by its ribbed outside finish
Sight Tube Hose
Part No Description Internal Diameter (A) Outside Diameter (B)
HOS12sight 12mm Clear Sight Tube Hose 12mm 15mm
HOS12Wsight 12mm Clear Sight Tube Hose with Wire 12mm 18mm
Layflat Hose
Part No Description Internal Diameter (A) Outside Diameter (B)
GA5021395 50mm Blue Layflat Hose 50mm N/A
144 - Prairie Eco Parts Manual - Rev 1.0
OPTIONAL ACCESSORIES
The below items are not factory options.They may be fitted to the sprayer as a Dealer Fitted
Option (DFO). Contact your Goldacres dealer for more information on DFO’s.
Enviro
Coupling & Hose
GA5020600 Complete Kit
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA5018803 Coupler, 3 Pin, Viton Flow Control 1
2 100E Male Adapter 1" Hose Shank 1
3 GA5001681 1" SS hose clamp 2
4 HOS25PVC - suit enviro chem probe PVC hose 25mm cut 2840mm 1
5 HB100 Hose Barb 1" 1
Chapter 20 - Optional Accessories - 145
TION
3
PH6 Pump Mounting Kit
QTY.
4 5 6 7 8
ounting Plate 1
ount plate 1 13 15 A
2x20.5x9.5 2 16
0 flowmeter to 10
pump 1
11
racket 2 2 7
SHER 8
ZP GR 8.8 ZP 4 6
nut Z/P 4
f Switch Cover 1
coupling 1 B
ushing 2 x 1 1
Coupling 1
gree 1" Banjo 3
n/Off water 1
f
H6 Pump 1
ow 2" 1
w 1" Poly 1 1 3 12 13
e Barb 1" 1
C
14
5
4 17 18 D
6
ITEM NO. PART NUMBER DESCRIPTION Tank inlet GA4922140 QTY.
1 GA4523891 PH6 Flowmeter Replaces
Mounting thePlatestandard Venturi inlet 1
2 GA4523890 PH6 pump mount plate 1
3 GA4552070 crush tube 16.2x20.5x9.5 2
4 GA5068485 Flow serve SEM 10 flowmeter to suit PH6 pump 1
5 F70107A 18mt ram bracket 2
6 GA5000587 M12 WASHER REV NO CHANGE 8 DATE ECN NO.
1-3 MORANG CR
7 GA5011223 Bolt M12 x 200 ZP GR 8.8 ZP 4
8 GA5012461 M12 Nyloc nut Z/P
GOLDACRES 4
MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
GA5012175 Note: Rotate
WaterPH6 pump soCover
switch B/Pis Chemical fill pump kit suit EVO1LHS pod
TITLE:
9 Narva Proof Switch
on pod side
10 CPLG200 2 poly pipe coupling 1
DATE CREATED:
DWG NO.
11 RB200100 Poly Reducer Bushing 2 x 1
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN MILLIMETERS
22/03/2011 1 A3
DEBUR ALL EDGES Luke M
DRAWN:
GA4903292
12 CPLG100 1" Poly Pipe Coupling
DATE EDITED: MATERIAL: 1
14/11/2012
3
13 4 HB100-90 MattHose barb 90 degree 1" Banjo
DO NOT SCALE DRAWING SCALE:1:15 3 SHEET 1 OF 1
14 GA5016749 Switch toggle On/Off water proof 1
15 GA5068480 Flowserve PH6 Pump 1
16 SL200-90 Street Elbow 2" 1
17 SL100-90 Street Elbow 1" Poly 1
18 HBF100 Female Hose Barb 1" 1
146 - Prairie Eco Parts Manual - Rev 1.0
ITEM NO. PART NUMBER DESCRIPTION QTY.
A
1 B344BEC-24-C Electric shutoff valve 2 way 1" BSP 1
2 GA5009335 Gasket Kamlock Nitrile 1 1/2 Fit 150 2
3 M200BRB 2" Hose barb to flange 2
4 90-02316 Flow Meter 90-02316 TeeJet Flow Meter 1
4 FC200 200 Series Std Screw Clamp 2
5 GA5010191 2" Hose Clamp 8
B
Fill Flow Meter
5
4
3
2
1
2
3
4
5
C
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 B344BEC-24-C Electric shutoff valve 2 way 1" BSP 1
E
2 GA5009335 Gasket Kamlock Nitrile 1 1/2 Fit 150 2
3 M200BRB 2" Hose barb to flange 2
REV NO CHANGE
4 90-02316 Flow Meter 90-02316 TeeJet Flow Meter 1
4 FC200 200 Series Std Screw Clamp 2 GOL
5 GA5010191 2" Hose Clamp 8 TITLE:
90-02324
Fill Flow Meter Monitor
1 2 3 4 5 6
F
ITEM NO. PART NUMBER UNLESS OTHERWISE SPECIFIED
DESCRIPTION QTY.
DATE CREATED:
31/07/2012 DWG NO.
1 75-30013 - 70 seriesDIMENSIONS ARE IN MILLIMETERS
DEBUR ALL EDGES
-
Name
DRAWN:
90-02324 Flow Mete
1
flow meter 14/11/2012
DATE EDITED: MATERIAL:
1
A
2 3 2 4 GA5004053 Matt Bolt BHCS S'Steel M6x20
DO NOT SCALE DRAWING 3
SCALE:1:5
A
3 GA5004437 M6 SS Washer 6
4 GA5048115 M6 Nyloc Nut SS 3
B 3 B
C C
ITEM NO. PART NUMBER DESCRIPTION QTY. 1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
1 D 75-30013 Fill flow meter monitor 1 FAX: 03 53426308
TITLE:
2 GA5004053 Bolt BHCS S'Steel M6x20 UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN MILLIMETERS
DATE CREATED:
31/07/2012
3
DEBUR ALL EDGES DRAWN:
DWG NO:
3 REVGA5004437
NO CHANGE M6 SS APPLWasher
DATE
DATE EDITED:
14/11/2012
UNTOL. DIMENSIONS
OPEN DIM
Name
± 0.20 MATERIAL:
Monitor mounting 6 A4
David ONE DEC. PL. ± 0.10
4 GA5048115
1 2 M6 Nyloc Nut SS TWO DEC. PL. ± 0.05
ANGULAR ± 0°30' DO NOT SCALE DRAWING SCALE:1:2.5 3 SHEET 2 OF 2
Chapter 20 - Optional Accessories - 147
5 6 7 8
3” Fill Pump
19
11 14
17 13
16 21 B
18
9
11
10 15
8
12 C
6
10 2
3
20 4
5
1
D
6
7
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 GA4658170 Fill pump mount frame 2011 1
2 300PHYV 3" Banjo fill pump 1
3 GA5000587 M12 WASHER 4
4 GA5000575 M12 Spring washer SS 4
5 GA5000295 Set screw HT M12 x 25 4
6 GA5004883 Washer 8mm HD 8
7 GA5004917 M8 Nyloc Nut 4
REV NO CHANGE DATE ECN NO.
8 GA5048655 M8x40 bolt 4
1-3 MORANG CR
9
10
GA4523865
S77-0808 0808 90' Elbow
GOLDACRES
fill pump tap plate suit 3 inch pump MITCHELL1PARK 3352
PH: 03 53426399
2
FAX: 03 53426308
Pump internal details
TITLE:
see Banjo parts book 11 GA5001739 M20 Heavy Duty Flat Washer 6
Fill pump 3 inch Assem Evo 2011
12 GA5000835 Ball valve hydraulic 1/2" FF 1
13 S27-0808 0808 BSPTM BSPMTDWG
DATE CREATED: nipple
NO.
1
UNLESS OTHERWISE SPECIFIED 4/01/2011
DIMENSIONS
14 ARE IN MILLIMETERS
GA5007060 LukeCheckDRAWN:
GA4903149
Valve (45 LPM) 1/2 BSPP zero bar 1 A3
DEBUR ALL EDGES M
15 S93-0814
DATE EDITED:
13/11/2012
0.5inch BSPT male to 0.875 inch UN O ring male
MATERIAL:
2
Matt
16 GA5000117 Washer 10mm SS Heavy duty
DO NOT SCALE DRAWING SCALE:1:10 SHEET 1 OF 2
4
17 GA5000141 M10 Nyloc Nut 2
Continued over page
148 - Prairie Eco Parts Manual - Rev 1.0
ITEM NO. PART NUMBER DESCRIPTION QTY.
18 GA5065455 Bolt Gr8.8 M10x30 2
19 GA4903149-3 3" Fill Pump Outlet 1
20 GA4903149-1 3" Fill Pump Inlet 1
21 GA4903149-2 Fill pump hyd hose assy 2
2 3 4 5 6
22 GA4903149-02 1/2" hyd hose cut 340mm T202-0808 and T205-0808 1
MBER DESCRIPTION QTY.
Poly Pipe Reducer Bush 3" x 2" 1
3” Fill Pump Outlet
2" X 6" Poly Nipple 1
Street Elbow 2" 1 A
Cam lever coupling - 2" female 1
coupler x 2" female thread
Cam lever coupling - 2" male 1
adapter x 2" hose shank
5
B
1 C
1-3 MORANG CR
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
FAX: 03 53426308
TITLE:
GA4903149-3 Fill Pump Outlet
UNLESS OTHERWISE SPECIFIED: DATE CREATED:
3" Fill Pump Outlet
DIMENSIONS ARE IN MILLIMETERS 2/08/2012
ITEM NO. PART NUMBER
DEBUR ALL EDGES
DESCRIPTIONDRAWN:
DWG NO: QTY.
APPL DATE
DATE EDITED:
GA4903149-3 A4
1 RB300200
13/11/2012 Poly Pipe Reducer Bush 3" x 2"
MATERIAL:
1
2
Matt
2 NIP200-6 2" X 6"DOPoly Nipple
NOT SCALE DRAWING SCALE:1:5 SHEET 1 OF 1
1
3 SL200-90 Street Elbow 2" 1
4 200D Cam lever coupling - 2" female coupler x 2" female thread 1
5 200E Cam lever coupling - 2" male adapter x 2" hose shank 1
Chapter 20 - Optional Accessories - 149
1 2 3 4 5 6
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 300CAP 3" Female Cam lock Cap 1
2 300F Male Cam lock Adaptor 3 Male 1
Thread
3 SL300-453” Fill Pump inlet Street Elbow 3" 45 deg 1
1-3 MORANG CR
GA4903149-1 Fill Pump Inlet
GOLDACRES MITCHELL PARK 3352
PH: 03 53426399
ITEM NO. PART NUMBER DESCRIPTION TITLE:
QTY. FAX: 03 53426308
1 300CAP 3" FemaleUNLESS
Cam lock Cap DATE CREATED:
OTHERWISE SPECIFIED:
3" Fill Pump Inlet 1
DIMENSIONS ARE IN MILLIMETERS 2/08/2012
2 300F Male Cam lock Adaptor 3 Male Thread
DEBUR ALL EDGES DRAWN:
DWG NO: 1
APPL DATE
DATE EDITED:
GA4903149-1 A4
REV NO CHANGE
3 SL300-45 Street Elbow 3" 45 deg
13/11/2012
MATERIAL:
1
1 2
Matt
DO NOT SCALE DRAWING SCALE:1:3 SHEET 1 OF 1
150 - Prairie Eco Parts Manual - Rev 1.0
Chapter 20 - Optional Accessories - 151
Terms and Conditions
Interpretation (2) A decreasing or increasing adjustment and or the issuing of an adjustment note, pursuant to Division 21 and Division 29-C of the GST Act,
1. In terms and conditions: shall not, in any way, constitute a release, waiver, and or forgiveness of the debt incurred by the Purchaser.
(1) “Goldacres” or “Pathway” means Goldacres Trading Pty. Ltd. A.C.N. 061 306 732 trading as Goldacres Agricultural Equipment (its succes- Interest on overdue payments
sors and assigns) which is the seller of the Goods; 15. If Goldacres/Pathway is not paid for any Goods or services on the due date specified in this agreement without prejudice to any other right
(2) “Purchaser” means the purchaser of the Goods; or remedy, all outstanding money shall bear interest at the rate set, pursuant to the Penalty Interest Rates Act, Victoria, 1986, as such
(3) “Goods” means the products and, if any, the services sold or provided by Goldacres/Pathway to the Purchaser; money, together with interest shall be recoverable forthwith from the Purchaser.
(4) “GST Act” and “GST” are given the meanings referred to in a New Tax System (Goods and Services Tax) Act 1999. Rights in relation to Goods.
(5) “PPSA” means the Personal Property Securities Act 2009 (Clth) (as amended); 16. (1) Title to the Goods supplied by Goldacres/Pathway to the Purchaser shall remain with Goldacres/Pathway until the total amount due in
(6) Nothing in these terms and conditions shall be read or applied so as to exclude, restrict or modify or have the effect of excluding, restrict- respect of the Goods and all monies owing to Goldacres/Pathway have been paid in full (the “Debts”). Risk in the Goods shall pass to the
ing or modifying, any condition, warranty, guarantee, right or remedy implied by law (including the Competition and Consumer Act 2010) Purchaser upon delivery.
and which by law cannot be excluded, restricted or modified. (2) The Purchaser shall have the right to resell Goods but only as fiduciary agent and trustee for Goldacres/Pathway by way of bona fide sale
General at full market value and in the ordinary course of its business.
2. (1) The Goods and all other products or services provided by Goldacres/Pathway are provided subject to these terms and conditions. (3) Until all the Debts have been paid in full:
These terms and conditions and any terms and conditions incorporated herein by virtue of clause 3 hereto shall prevail over all other (a) the Purchaser shall take custody of the Goods as trustee, fiduciary agent and bailee for Goldacres/Pathway;
terms and conditions of the Purchaser or otherwise to the extent of any inconsistency. (b) the Purchaser shall keep the Goods separate from any other goods and properly marked, stored, protected and insured;
(2) These terms and conditions may not be modified or amended without the expressed written consent of Goldacres/Pathway endorsed by (c) the Purchaser must hold all of the money it receives (“Proceeds”):
the Managing Director of Goldacres Trading P/L. (i) from the sale of any property into which Goods supplied have been incorporated; and
Additional Terms and Conditions (ii) from the sale of Goods or provision of services including the Goods supplied by the Goldacres/Pathway as bailee, fiduciary agent and
3. From time to time Goldacres/Pathway may provide additional or extended warranties in respect of certain goods and/or services. Where trustee for Goldacres/Pathway, but the Purchaser need not hold on trust any money exceeding the amount of the Debts at the time the
such additional or extended warranties are provided to a Purchaser in writing they will be incorporated into these terms and conditions money is received.
provided that in the event of any inconsistency between these terms and conditions and the terms of any additional or extended warranty, (d) The Purchaser expressly acknowledges that it is bound by the fiduciary obligation created in the preceding paragraph and acknowledges
the provisions of the additional or extended warranty shall prevail. that:
Goldacres/Pathway quotations. (i) it must hold the Proceeds on trust for Goldacres/Pathway;
4. Unless previously withdrawn, Goldacres/Pathway quotations are open for acceptance within the period stated therein or, when no period is (ii) it must place the whole of the Proceeds in an account separate from its own moneys (the “Proceeds Account”);
stated, with 14 days only of the quotation date. Goldacres/Pathway reserves the right to refuse any order based on any quotation within 7 (iii) it must maintain the Proceeds Account separate from its own moneys at all times.
days of receipt of the order. (iv) it must maintain proper records for the Proceeds Account.
Packing (v) it must not assign or encumber any book debts arising from sales made in circumstances set out in clauses 16(c)(i) and (ii) or do any
5. The cost of any special packing and packing materials used in relation to the Goods shall be at the Purchaser’s expense notwithstanding other act in derogation of Goldacres’/Pathway’s legal or beneficial interests; and
that such cost may have been omitted from any quotation. (vi) it must account to Goldacres/Pathway on demand for all moneys standing to the credit of such account.
Shortage (e) For the purposes of identification of different consignments of Goods purchased from Goldacres/Pathway and receipt of Proceeds, the
6. The Purchaser waives any claim for shortage of any Goods delivered if a claim in respect thereof has not been lodged with Goldacres/ Purchaser agrees that the principle of “Last In, First Out” shall be applied to any items that cannot be distinguished.
Pathway within (7) seven days from the date of receipt of the Goods by the Purchaser. (f) Goldacres/Pathway may trace the Proceeds in equity.
Specifications, etc: Catalogues, etc: Quantities (4) Goldacres/Pathway may at any time, without notice to the Purchaser and without prejudice to any other rights which it may have against
7. All specifications, (including but not limited to: drawings, particulars of weights, volumes, capacities, dimensions, load factors) are ap- the Purchaser, terminate any contract connected with the Goods and the bailment referred to in clause 16(3) and enter upon any premises
proximate only and any deviation shall not be taken to vitiate any contract with Goldacres/Pathway or form any claim against Goldacres/ owned or occupied by the Purchaser where Goldacres/Pathway reasonably believes the Goods may be stored, and repossess the Goods
Pathway. The descriptions, illustrations, and performances contained in catalogues, price lists and other advertising matter do not form without liability for any damaged caused, and subsequently dispose of the Goods at Goldacres/Pathway’s discretion if:
part of the contract of sale of the Goods. Where specifications, drawings or other particulars are supplied by the Purchaser, Goldacres/ (a) the Debts are not paid in accordance with these terms and conditions or any other contract or arrangement between Goldacres/Pathway
Pathway’ price is made on estimates of quantities required. Should there be any adjustments in quantities above or below the quantities and the Purchaser; or
estimated by Goldacres/Pathway and set out in a quotation, then any such increase or decrease shall be adjusted on a unit rate basis (b) Goldacres/Pathway receives notice of or reasonably believes that:
according to unit prices set out in the quotation. (i) a third person may attempt to levy execution against the Goods; or
Performance, Capacities, Chemicals, Liquids, Application Methods, Environmental Effects (ii) the Purchaser is insolvent (within the meaning of the Corporations Act 2001) or bankrupt; or
8. Any performance, volumes, and/or capacity figures given by Goldacres/Pathway are estimates only. Goldacres/Pathway shall be under (iii) the Purchaser has entered into any arrangement or composition with its creditors, gone into liquidation, or has appointed a receiver, a
no liability for damages for failure to obtain such figures unless specifically guaranteed in writing and any such written guarantee shall receiver and manager or administrator.
be subject to the recognised tolerances applicable to such figures. The suitability of chemicals and other liquids for any application and (5) If after repossession under clause 16(4) Goldacres/Pathway sells the Goods, Goldacres/Pathway shall account to the Purchaser for any
the application methods and the environmental effects shall be the sole decision and responsibility of the Purchaser and the user of the proceeds of sale (less expenses of repossession and sale) that exceeds the amount of the outstanding Debts.
Goods. Goldacres/Pathway gives no warranty as to the suitability of any chemicals or other liquids for any application, nor the application (6) If any Goods belonging to Goldacres/Pathway are disposed of by the Purchaser or an insurance claim is made in respect of them,
methods nor the environmental effects, which may result from the use of the Goods. Goldacres/Pathway shall be under no liability for Goldacres/Pathway shall be entitled to trace the sale or insurance proceeds, which proceeds shall be held by the Purchaser in a separate
damages arising out of the use of any chemicals, liquids, or mixtures in the Goods nor for any application, nor for the application methods bank account on trust for Goldacres/Pathway.
nor for the environmental effects, which may result from the use of the Goods. (7) The Purchaser agrees and acknowledges that in the event it sells Goods to a third party on account, it will include in its terms and
Delivery/Service Times conditions of sale a provision under which the Purchaser retains title to the Goods until such time that the total amount due in respect
9. The delivery times and service times made known to the Purchaser are estimates only and Goldacres/Pathway shall not be liable for late of the Goods and all monies owing to the Purchaser have been paid in full by that third party debtor. The Purchaser also agrees and
delivery, non-delivery or delay and under no circumstances shall Goldacres/Pathway be liable for any loss, damage or delay occasioned by acknowledges that in these instances, it will register its PMSI in accordance with the PPSA in respect of its security interest in the Goods.
the Purchaser or its customers arising from the late or non-delivery or late installation of the Goods. PPSA provisions
Loss or damage in transit 17. (1) The Purchaser acknowledges that these terms and conditions constitute a security agreement for the purposes of section 20 of the
10. Goldacres/Pathway is not responsible for any loss or damage to Goods in transit. Goldacres/Pathway shall render the Purchaser such PPSA and that a security interest exists in all Goods (and any associated Proceeds from their sale) previously supplied by Goldacres/
assistance as may be necessary to press claims on carriers provided that the Purchaser shall have notified Goldacres/Pathway and the Pathway to the Purchaser (if any) and in all in future Goods (and any associated Proceeds from their sale) that may be supplied to the
carriers immediately the loss or damage is discovered on receipt of Goods and shall lodge a claim on the carrier within three days of the Purchaser by Goldacres/Pathway.
date of receipt of the Goods. Insurance of Goods in transit is the responsibility of the Purchaser. (2) The Purchaser acknowledges that Goldacres/Pathway has a first ranking purchase money security interest (“PMSI”) (as defined in section
Limit of Liability 14 of the PPSA) in the Goods and the Purchaser must not jeopardise such ranking (whether by act or omission).
11. (1) Goldacres/Pathway liability for Goods manufactured by it is limited to: (3) The Purchaser acknowledges that it has received value as at the date of first delivery of the Goods and has not agreed to postpone the
(a) where the law implies consumer guarantees into these terms and conditions pursuant to Part 3.2 Division 1 of Schedule 2 to the Competi- time for attachment of the security interest (as defined in the PPSA) granted to Goldacres/Pathway under these terms and conditions.
tion and Consumer Act 2010 (C’th”) (“consumer guarantees”) which cannot be excluded and Goldacres/Pathway breaches a consumer (4) The Purchaser will execute documents and do such further acts as may be required by Goldacres/Pathway to register the security interest
guarantee, the loss and damage the Purchaser is entitled to at law which cannot be excluded by these terms and conditions; granted to Goldacres/Pathway under these terms and conditions under the PPSA.
and, in all other cases (5) Until ownership of the Goods passes, the Purchaser must not give to Goldacres/Pathway a written demand or allow any other person
(b) making good any defects by repairing the same or at Goldacres/Pathway option by replacement within a period not exceeding either 1000 to give Goldacres/Pathway a written demand requiring Goldacres/Pathway to register a financing change statement under the PPSA in
hours or twelve calendar months, whichever comes first, after the Goods have been dispatched provided that: respect of Goldacres/Pathway’s interest in the Goods.
(i) the defects have arisen solely from faulty materials or workmanship; (6) The Purchaser must indemnify Goldacres/Pathway and on demand reimburse Goldacres/Pathway for all costs and expenses incurred by
(ii) the Goods have not received maltreatment inattention or interference; Goldacres/Pathway in respect of these terms and conditions including but not limited to Goldacres/Pathway registering its security inter-
(iii) accessories of any kind used by the Purchaser are manufactured or approved by Goldacres/Pathway; est in the Goods, lodging, discharging or amending any financing statement or financing change statement, or otherwise complying with
(iv) where applicable, the seals on the Goods remain unbroken; the PPSA.
(v) there has been no improper adjustment, calibration or operation; (7) The Purchaser agrees (other than as provided in these terms and conditions) not to sell, lease, mortgage, deal with, dispose of or create
(vi) the use of accessories including consumables, hardware or software (not manufactured by Goldacres/Pathway) has been approved in or attempt to create any other security interest in or affecting the Goods unless and until the Purchaser’s Debts have been satisfied.
writing by Goldacres/Pathway; (8) The Purchaser waives its rights under the following provisions of Chapter 4 of the PPSA:
(vii) no contamination or leakage has been caused or induced; (a) to receive a notice on enforcement action against liquid assets (section 121(4),
(viii) any modification to the Goods have been authorised in writing by Goldacres/Pathway; (b) to receive a notice to seize collateral (section 123);
(ix) there has been no inadequate or incorrect use, storage, handling or application of the Goods; (c) to receive a notice of disposal of Goods by Goldacres/Pathway purchasing the Goods (section 129);
(x) there has been no use or operation of the Goods outside of the physical, electrical or environmental specifications of the Goods; (d) to receive a notice to dispose of Goods (section 130);
(xi) there has been no inadequate or incorrect site preparations; (e) to receive a statement of account following disposal of Goods (section 132(2));
(xii) there has been no inadequate or improper maintenance of the Goods; (f) to receive a statement of account if no disposal of Goods for each 6 month period (section 132(4));
(xiii) it has not been caused by fair wear and tear; and (g) to receive notice of any proposal of Goldacres/Pathway to retain Goods (section 135(2));
(xiv) firstly the Goods have been thoroughly inspected and any damage (from whatever cause) to the Goods (and in particular – the structure, (h) to object to any proposal of Goldacres/Pathway to either retain or dispose of Goods (section 137(2));
welding, seams, bolts, booms) has been repaired prior to the Goods being operated, used driven or moved and on each occasion the tanks (i) to redeem the Goods (section 142);
are filled; and (j) to reinstate the security agreement (section 143);
(xv) there has been no failure to comply with the requirements of all present or future laws or regulations relating to the Goods and/or the use (k) to receive a notice of any verification statement (section 157(1) and section 157(3);
and/or the operation of the Goods; and (9) The rights Goldacres/Pathway may have under the PPSA are supplementary and in addition to those set out in these terms and conditions
(xvi) there has been no failure to maintain a record of hours of operation (which record shall contain full details of all inspections, repairs and and do not derogate from the rights and remedies of Goldacres/Pathway under these terms and conditions or under any other statute or
maintenance) and produce same to Goldacres/Pathway at the time of the claim; under general law.
(xvii) the defective Goods or any damaged part of the Goods are promptly returned free of cost to Goldacres/Pathway or a representative of (10) The Purchaser must give 10 business days prior written notice of any proposed change in the Purchaser’s name or other identifying
Goldacres/Pathway; characteristics and details.
(xviii) all warranty related repairs have been carried out with the prior authorisation of Goldacres/Pathway; Purchasers property
(2) If Goods or any part thereof are not manufactured by Goldacres/Pathway, in particular engines, engine accessories, transmissions, 18. Any property of the Purchaser under Goldacres/Pathway’s custody or control shall be entirely at the Purchaser’s risk as regards loss or
transfer cases, differentials, tyres, tubes, batteries, radios and UHFs, the guarantee of the manufacturer thereof shall be accepted by the damage caused to the property or by it.
Purchaser and is the only guarantee given to the Purchaser in respect of the Goods or that part provided always that this clause does not Storage
seek to exclude the consumer guarantees; 19. Goldacres/Pathway reserves the right to make a reasonable charge for storage if delivery instructions are not provided by the Purchaser
(3) In the case of hydraulic systems, Goldacres/Pathway shall replace defective parts in accordance with clause 11(1) of these conditions, within (14) fourteen days of a request by Goldacres/Pathway for such information.
provided that the failure of the part was not related to contamination within the system, Goldacres/Pathway shall not be liable for labour Returned Goods
in the case of repairing hydraulic system defects; 20. Goldacres/Pathway shall not be under any obligation to accept Goods returned by the Purchaser and will do so only on terms to be agreed
(4) Goldacres will not accept liability for damage attributed to fair wear and tear including but not limited to fair wear and tear to nozzles, in writing in each individual case.
chains, belts, filters, brake pads, polyethylene bushes and liquid pump valves, valve O-rings, diaphragms and seals; Goods sold
(5) Goldacres/Pathway shall not be liable for and the Purchaser releases Goldacres/Pathway from any claims in respect of faulty or defective 21. All Goods to be supplied by Goldacres/Pathway shall be described on the purchase order agreed by Goldacres/Pathway and the Purchaser
design of any Goods supplied unless such a design has been wholly prepared by Goldacres/Pathway and the responsibility for any claim and the description on such purchase order modified as so agreed shall prevail over other descriptions including any Purchaser’s specifica-
has been specifically accepted by Goldacres/Pathway in writing and in any event Goldacres/Pathway liability hereunder shall be strictly tion or enquiry.
limited to the replacement of defective parts in accordance with paragraph 11(1) of these conditions provided always that this clause does Cancellation
not seek to exclude the consumer guarantees; 22. No order may be cancelled except with the consent in writing and on terms, which will indemnify Goldacres/Pathway against all losses.
(6) Except as provided herein, all express and implied warranties, guarantees and conditions under statute or general law as to the mer- No waiver
chantability, description, quality, suitability or fitness of the Goods for any purpose or as to design, assembly, installation, materials or 23. The failure of any party to enforce the provisions of these terms and conditions or to exercise any rights expressed in these terms and
workmanship or otherwise are hereby expressly excluded and Goldacres/Pathway shall not be liable for physical or financial injury, loss or conditions shall not be a waiver of such provisions or rights and shall not affect the enforcement of this agreement. The exercise by any
damage or for consequential loss or damage of any kind arising out of the supply, layout, assembly, installation or operation of the Goods party of any of its rights expressed in this agreement shall not preclude or prejudice such party from exercising the same or any other
or arising out of Goldacres/Pathway negligence or in any other way whatsoever; rights it may have irrespective of any previous action taken by that party.
(7) The benefit of any warranty provided under these terms and conditions shall only be available to the Purchaser and shall not be transfer- Force Majeure
able by the Purchaser; 24. If by reason of any fact, circumstance, matter or thing beyond the reasonable control of Goldacres/Pathway is unable to perform in whole
(8) The warranties provided under these terms and conditions do not extend to second hand or used Goods that may be sold by Goldacres/ or in part any obligation under these terms and conditions then Goldacres/Pathway shall be relieved of that obligation under these terms
Pathway. and conditions to the extent and for the period that it is so unable to perform and shall not be liable to the Purchaser in respect of such
12. Goldacres/Pathway liability for breach of a consumer guarantee is hereby limited (in the case of goods and services not used for personal, inability.
domestic or household purposes) to: Passing of risk
(1) in the case of Goods, any one or more of the following: 25. Risk in the Goods shall pass to the Purchaser upon delivery of the Goods to the Purchaser or collection of the Goods by the Purchaser’s
(a) the replacement of the Goods or the supply of equivalent Goods; agent or carrier as the case may be.
(b) the repair of the Goods; Exclusion of liability
(c) the payment of the cost of replacing the Goods or acquiring the equivalent Goods; 26. To the extent permitted by law Goldacres/Pathway shall not be liable to the Purchaser in contract or in tort arising out of, or in connection
(d) the payment of having the Goods repaired; or with, or relating to, the performance of the Goods or any breach of these conditions or any fact, matter or thing relating to the Goods or
(2) in the case of services; error (whether or not it is negligent or a breach of contract) in information supplied to the Purchaser or a user before or after the date of
(a) the supplying of the services again; or the Purchaser’s or user’s use of the Goods and Goldacres/Pathway shall be under no liability for damages arising out of the use of any
(b) the payment of the cost of having the services supplied again. chemicals, liquids, or mixtures in the Goods, nor for any application, not for the application methods nor for the environmental effects,
Prices which may result therefrom or from the use of the Goods.
13. (1) Unless otherwise stated in writing by Goldacres/Pathway, all prices quoted by Goldacres/Pathway are inclusive of GST for supplies Exclusion of representations and arrangements
within Australia and exclusive of GST for exports outside of Australia. Prices quoted are those ruling at the time of quotation or the date 27. To the extent permitted by law the terms and conditions supersede and exclude all prior and other discussions, representations (contrac-
the price is given and are based on rates of freight, insurance, customs, duties, taxes, exchange, shipping expenses, sorting and stacking tual or otherwise) and arrangements relating to the supply of the Goods or any part thereof including, but without limiting the generality
charges, cartage, cost of materials and other charges affecting the cost of production ruling on that date and any alterations thereto either of the foregoing, those relating to the performance of the Goods or any part thereof or the results that ought to be expected from using
before acceptance of or during currency of the contract shall be to the Purchaser’s account. the Goods.
(2) For the purpose of 38-185 of the GST Act, the day upon which the seller gives the invoice for the supply shall be the date of the invoice. Place of contract
Payment 28. The contract for sale of the Goods and the provision of the services is made in the State of Victoria and the Purchaser agrees to submit all
14. (1) The purchase price in relation to the Goods and the cost of the service shall be payable without deduction and or set off and payment disputes arising with Goldacres/Pathway to the courts of such State and any court competent to hear appeals therefrom.
thereof shall be made on or before the thirteenth day of the month following the delivery of the Goods or performance of the services
unless other terms of payment are expressly stated in writing.
(March 2013)
www.goldacres.com.au
You might also like
- Atlas Copco: Stationary Air CompressorsNo ratings yetAtlas Copco: Stationary Air Compressors102 pages
- 6h.5255-6k1080ta Engine For Power Generation 125kva80% (5)6h.5255-6k1080ta Engine For Power Generation 125kva118 pages
- Spare Parts Catalog: Generated From Docmine100% (6)Spare Parts Catalog: Generated From Docmine619 pages
- YANMAR Part Catalog - 8 LAA-UTE - Umakalada100% (4)YANMAR Part Catalog - 8 LAA-UTE - Umakalada145 pages
- NOTES FOR: C-13814/1: Oissco Distribuidor Autorizado de Waukesha para BoliviaNo ratings yetNOTES FOR: C-13814/1: Oissco Distribuidor Autorizado de Waukesha para Bolivia48 pages
- Advance: Máquinas Agrícolas Jacto S.A. EDITION - 06/2007No ratings yetAdvance: Máquinas Agrícolas Jacto S.A. EDITION - 06/200779 pages
- Figure 65 - Hydraulic System Installation (Piper Lance)No ratings yetFigure 65 - Hydraulic System Installation (Piper Lance)6 pages
- 39HR Spare Parts - S/N: 141200-Lot 15 Reference Information For Parts Department and CustomerNo ratings yet39HR Spare Parts - S/N: 141200-Lot 15 Reference Information For Parts Department and Customer6 pages
- H4800 Lubrication & Hydraulic Oil Tank Spare Part List100% (1)H4800 Lubrication & Hydraulic Oil Tank Spare Part List71 pages
- Atlas Copco: Stationary Air CompressorsNo ratings yetAtlas Copco: Stationary Air Compressors220 pages
- Catalo Partes P30, P50, P330, P350 MetarisNo ratings yetCatalo Partes P30, P50, P330, P350 Metaris41 pages
- Spare Parts List: Hydraulic Breakers RX6No ratings yetSpare Parts List: Hydraulic Breakers RX616 pages
- PrairieAdvanceEFMY10 GA5061430 R1.3 OpmNo ratings yetPrairieAdvanceEFMY10 GA5061430 R1.3 Opm222 pages
- Service Manual: Valeo TM08, TM13, TM15 & TM16 Compressors100% (1)Service Manual: Valeo TM08, TM13, TM15 & TM16 Compressors56 pages
- Torque-Hub Planetary Final Drive 7000 Series Service Brakes: Manual With100% (2)Torque-Hub Planetary Final Drive 7000 Series Service Brakes: Manual With66 pages
- 520L0557 - General Gear Pumps and Motors - TI - 10-2003 - A PDFNo ratings yet520L0557 - General Gear Pumps and Motors - TI - 10-2003 - A PDF76 pages
- 0012 - Manual de Uso e Instalação CFX-750 (Portugues) PDF100% (1)0012 - Manual de Uso e Instalação CFX-750 (Portugues) PDF150 pages
- Hex Nylon Insert Locknuts (NE), Grade N5, Zinc: Page 1 of 2 REV-04 Date: April 28, 2017 NYLK - NE.N5.ZNo ratings yetHex Nylon Insert Locknuts (NE), Grade N5, Zinc: Page 1 of 2 REV-04 Date: April 28, 2017 NYLK - NE.N5.Z2 pages
- COMPLETEL SET - KCLS ILS Requirements 0No ratings yetCOMPLETEL SET - KCLS ILS Requirements 0365 pages
- Creative Mutual Fund Advertising TrendsNo ratings yetCreative Mutual Fund Advertising Trends24 pages
- WiGig IEEE 802.11ad - 60 GHZ Microwave Wi-Fi - Electronics Notes-7 GbpsNo ratings yetWiGig IEEE 802.11ad - 60 GHZ Microwave Wi-Fi - Electronics Notes-7 Gbps7 pages
- New Social Contract for Digital WorkersNo ratings yetNew Social Contract for Digital Workers13 pages
- Walter's Dividend Policy Model ExplainedNo ratings yetWalter's Dividend Policy Model Explained7 pages
- Examining The Relationship Between Motivational Factors and Job Satisfaction An Empirical Study100% (1)Examining The Relationship Between Motivational Factors and Job Satisfaction An Empirical Study13 pages
- Tribunals Organisation Chart (jUK 16 April 2021)No ratings yetTribunals Organisation Chart (jUK 16 April 2021)1 page
- Answers For Economics 1st Edition Acemoglu Solutions ManualNo ratings yetAnswers For Economics 1st Edition Acemoglu Solutions Manual329 pages
