4

DOOR HINGES

AH 4.1
 Door Hinges
Table of contents

Information

Information on
> classiication key 4.3
> door hinges 4.6

Drill-in hinges and recessed hinges for interior

and front doors

Hinges for interior doors 4.9

Receivers 4.15
Decorative sleeves for drill-in hinges 4.16

Butt hinges for interior doors

4
Butt hinges for interior doors 4.17

Spring hinges and double action spring hinges

for interior doors

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Spring hinges 4.25
Double action spring hinges 4.26

Concealed mortice hinges for interior doors

Concealed mortice hinges for interior doors 4.28

Receivers, accessories and mounting aids 4.47
Wall recess 4.54

AH 4.2 New products and systems www.hafele.com

 Door Hinges
Classification

Classiication of hinges in compliance with EN 1935:2002

The requirements and test procedures for single-axle butt hinges and hinges with fixed pins for entrance doors and windows are defined
in European standard EN 1935:2002 "Architectural hardware, single-axle door and window hinges".
The requirements are classified using an 8-digit designation system.

8-digit classiication key in accordance with EN 1935:2002

Position
1 2 3 4 5 6 7 8
Hinge class Durability Weight of Suitability for Safety Corrosion Security: Hinge grade
test door use on fire resistance Forced entry
resistant/ resistance
smoke control
doors

Meaning of individual positions in classiication key:

4
Position Possible Meaning
grades
1 Hinge class 1–4 1 = light use
(hinges for doors or windows in houses or other residential areas and in buildings in which the
doors/windows are infrequently used by persons who are inclined to take care, whereby there
is a certain risk of accidents or abuse occurring.)
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

2 = medium use
(hinges for doors in houses or other residential areas and in buildings in which the doors/windows
are fairly frequently used by persons who are inclined to take care, whereby there is a certain risk
of accidents or abuse occurring.)

3 = heavy use
(hinges for doors in buildings in which the doors/windows are extremely frequently used by the
public or other users who are not inclined to use them carefully, and where there is a high risk
of accidents or abuse occurring.)

4 = extremely heavy use

(hinges for doors that are subjected to frequent slamming.)

2 Durability 3 – 4, 7 3 = 10,000 cycles (window hinges)

4 = 25,000 cycles (window and door hinges)

7 = 200,000 cycles (door hinges)

3 Weight of 0–7 0= 10 kg
test door 1= 20 kg
2= 40 kg
3= 60 kg
4= 80 kg
5= 100 kg
6= 120 kg
7= 160 kg
4 Suitability for use 0 – 1 0= not suitable for use on fire resistant/smoke control doors
on fire resistant/
smoke control 1 = suitable for use on fire resistant/smoke control doors
doors*

New products and systems www.hafele.com AH 4.3

 Door Hinges
Classification
Position Possible Meaning
grades
5 Safety 1 1 = all hinges must meet the basic safe usage requirements. For this reason, only one grade (grade 1)
has been defined.

6 Corrosion 0–5 0 = no defined corrosion resistance

resistance
1 = low corrosion resistance

2 = medium corrosion resistance

3 = high corrosion resistance

4 = extremely high corrosion resistance

5 = extraordinarily high corrosion resistance

7 Security: 0–1 0 = not suitable for use on forced entry resistant doors
Forced entry
resistance 1 = suitable for use on forced entry resistant doors

8 Hinge grade 1 – 14 With increased requirements (see following table)

4 * The proven fire resistant properties can be found in the relevant report.

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Deinition of individual hinge grades:

Position
8 Hinge grade 1 Hinge class 2 Durability 3 Weight of test door

1 1 (light duty) 3 (10,000 cycles) 0 (10 kg)

2 1 (light duty) 3 (10,000 cycles) 1 (20 kg)
3 1 (light duty) 4 (25,000 cycles) 1 (20 kg)
4 2 (medium duty) 7 (200,000 cycles) 1 (20 kg)
5 1 (light duty) 3 (10,000 cycles) 2 (40 kg)
6 1 (light duty) 4 (25,000 cycles) 2 (40 kg)
7 2 (medium duty) 7 (200,000 cycles) 2 (40 kg)
8 1 (light duty) 3 (10,000 cycles) 3,000 mm
9 1 (light duty) 4 (25,000 cycles) 3,000 mm
10 2 (medium duty) 7 (200,000 cycles) 3,000 mm
11 3 (heavy duty) 7 (200,000 cycles) 4 (80 kg)
12 4 (extremely heavy duty) 7 (200,000 cycles) 5 (100 kg)
13 4 (extremely heavy duty) 7 (200,000 cycles) 6 (120 kg)
14 4 (extremely heavy duty) 7 (200,000 cycles) 7 (160 kg)

AH 4.4 New products and systems www.hafele.com

 Door Hinges
Classification

Example: “Door hinge for lush doors, size 76 mm“ (certiied in compliance with EN 1935:2002)

• Classification code: 4 7 4 1 1 4 0 11

Position Meaning
1 Hinge class Grade 4:
Extremely heavy duty use 4
2 Durability Grade 7:
200,000 cycles (door hinges)

3 Weight of test door Grade 4:

80 kg

4 Suitability for use on Grade 1:

fire resistant/smoke Suitable for use on fire resistant/
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

control doors smoke control doors

5 Safety Grade 1:
All hinges must meet the basic safe
usage requirements.

6 Corrosion resistance Grade 4:

Very high corrosion resistance

7 Security: Grade 0:
Forced entry Not suitable for use on forced entry resistant doors
resistance
8 Hinge grade Grade 11:
Extremely heavy duty use, 200,000 cycles, 80 kg

New products and systems www.hafele.com AH 4.5

 Door Hinges
Information

Door hinges – subdivision

The hinges in this catalogue are subdivided into the following groups:
Drill-in hinges The section of Drill-in hinges and recessed hinges includes all
> Wing parts and frame parts for interior doors door hinges where components are drilled or recessed into door
> Drill-in hinges for interior and front doors panels and door frames.
> Recessed hinges for front doors
The section Frame and wing parts contains individual components
of door hinges, where only the combination thereof make up
Butt Hinges a complete door hinge.
> Butt hinges for interior and front doors 2-piece and 3-piece frame and wing parts can be combined into
> Drill-in hinges and butt hinges door hinges for steel and for wooden frames.
> Spring hinges for interior doors
Butt hinges are not ixed in the door frame or door panel, they
> Double action spring hinges for interior doors
are screwed onto the door structure.
> Concealed mortice hinges
> Butt hinges for architectural doors Concealed mortice hinges are mounted so that they are not visible
from outside when the door is closed.

Drill-in hinge Butt hinge

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge

AH 4.6 New products and systems www.hafele.com

 Door Hinges
Information

Mounting situation Hinge reference line

The mounting situation of a door includes the door rebate, the frame The hinge reference line is an imaginary line, running parallel with
material, the frame type as well as the opening direction of the door. the upper frame rebate. The distance between the hinge reference
The difference between the door rebates is explained in the line and the upper frame rebate determines the position of the
following illustrations. hinge. It is always illustrated as a dash-dot-dot line. The following
illustration shows the hinge reference line according to DIN 18101.

The hinge reference line is independent from the hinge type and
manufacturer. The distance of the hinge reference line of the upper
door hinge to the frame rebate is always 241 ±1 mm.
The distance between the upper and lower door hinge depends
on the door height. For example, on a door of 2,000 mm height,
the distance between both hinge reference lines is 1,435 ±0.5 mm.

If the door panel is itted with 3 hinges, the distance between

a) Butting b) Rebated the upper and centre door hinge reference line is 350 ±0.1 mm.

The door panels are itted to a long edge of the frame with hinged
doors. The pivot direction determines left or right hand doors. It is
important, on which side the door is itted. When choosing a door 4
hinge, the pivot direction of the door must be considered, as not
all door hinges can be used on the left and right hand side.
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Door mounting – DIN left or DIN right

The pivot direction determines left or right hand doors.

The door direction or side deinition according to DIN 107
is determined as follows:

> Visible position of the door hinges on the left = DIN left
> Visible position of the door hinges on the right = DIN right

! Reference edge frame rebate

" Hinge reference line

Wall openings for doorsa Hinge distances between

(block work standard the hinge reference lines
dimensions in accordance for upper and lower hinge
with DIN 18100)
Height in mm Dim. X ±0.5 mm

1625 1060
1750 1185
1875 1310
! DIN left 2,000 1435
2125 1435
" Hinges visible on the left hand side
2250 1685
§ DIN right 2375 1810
$ Hinges visible on the right hand side 2,500 1935
2625 2060
2750 2185

New products and systems www.hafele.com AH 4.7

 Door Hinges
Information

Max. door weight Protection against corrosion

The max. permissible door weight generally refers to a door The door hinges in this catalogue are available with different
(1 x 2 m) which is mounted with two hinges (or even three hinges). inishes. However, only galvanized and coloured powder coated
hinges that have been galvanized prior to powder coating have
For doors wider than 100 cm, the following formula for calculating long-term protection from corrosion.
the increase of the door mass (door weight) must be used:
Even so, these hinges are not suficiently protected from corrosion
Calculation: in wet rooms and outdoors.
a) Door height divided by door width = X Corrosion resistance is veriied by testing in accordance with the
b) Factor 2 minus X = increase of door mass % EN 1670 standard.

Example calculation:
Door height 2,000 mm
Door width 1,100 mm
a) 2,000/1,100 mm = 1.82
b) 2 – 1.82 = 0.1
= increase of the door mass by 18%.

When selecting the hinge type it must be considered that the actual
load in practice can exceed the door weight considerably due
to following factors:

> Installation site (e.g. residential buildings, public buildings)

4 >
>
Material of the door panel and door frame
Opening frequency of the door
> Door dimensions (extra wide)
> Opening direction of the door (e.g. outwards opening doors)
> Position and installation of the door hinges
> Door stop
> Door closer

Therefore when selecting a door hinge, especially for public

buildings, a weight buffer should always be taken into consideration.

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

AH 4.8 New products and systems www.hafele.com

 Drill-In Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

FI 1 Drill-in hinge FI 2 Drill-in hinge

Drill-In Hinges – StartecFor interior doorsPlanning and Construction Drill-in hinges – StartecFor interior doorsPlanning and Construction

f
> Area of application: For wooden frames,

> Door weight:

for rebated wooden interior doors
<40 kg
> Area of application: For wooden frames,

> Door weight:

for rebated wooden interior doors
<100 kg
g
> Knuckle q: 13 mm > Knuckle q: 16 mm
> Mounting: For DIN left and DIN right hand use > Mounting: For DIN left and DIN right hand use
> Standard:
> Class:
Certified in compliance with EN 1935:2002
2 7 2 0 1 2 0 7
> Standard:
> Class:
Certified in compliance with EN 1935:2002
4 7 5 0 1 2 0 12
4

Installation Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish Cat. No. Material Finish Cat. No.

Steel White galvanized 922.24.090 Steel White galvanized 922.24.190
Packing: 10 pieces Packing: 10 pieces

Decorative sleeves AH 4.16

New products and systems www.hafele.com AH 4.9

 Drill-In Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

FI 5 Drill-in hinge
Drill-In Hinges – StartecFor interior doorsPlanning and Construction

f
g > Area of application: For wooden frames,

> Door weight:

for rebated wooden front doors
<120 kg
> Knuckle q: 20 mm
> Overlay distance: >18 mm
4 > Bearing: Maintenance-free friction bearing
technology
> Security device: With security pin for outward opening
doors or without security pin (optional)
> Adjustment facility: Continuously 3D adjustable:
Height +4 mm,
side and closing pressure +3 / –2 mm
> Mounting: For DIN left and DIN right hand use
> Standard: Certified in compliance with EN 1935:2002
> Class: 4 7 6 0 1 2 1 13

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Installation

Material Finish With Without

security pin security pin
Steel White galvanized 922.24.590 922.24.490
Packing: 12 pieces

Decorative sleeves AH 4.16

25.04.2019
ID 2098

AH 4.10 New products and systems www.hafele.com

 Drill-In Hinges – Anuba
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Herkula 315 GL-RA, Herkula 315 GL-FR Herkula 316 GL-RA, Herkula 316 GL-FR
Drill-In Hinges – AnubaFor interior doorsPlanning and Construction Drill-in hinges – AnubaFor interior doorsPlanning and Construction

f
g
4
Herkula 315 GL-RA Herkula 315 GL-FR Herkula 316 GL-RA Herkula 316 FR
for blind frames for lining frames for blind frames for lining frame doors

> Area of application: For wooden frames, > Area of application: For wooden frames,
for rebated wooden interior doors for rebated wooden interior doors
> Version: For blind frames or lining frames (optional) > Version: For blind frames or lining frames (optional)
> Door weight: <55 kg > Door weight: <60 kg
> Knuckle q: 15 mm > Knuckle q: 16 mm
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Drill bit q : 6.3 mm step 1, > Drill bit q : 6.7 mm step 1,
7.2 mm step 2 7.7 mm step 2
> Overlay distance: >12 mm > Overlay distance: >14 mm
> Bearing: Maintenance-free friction bearing > Bearing: Maintenance-free friction bearing
technology technology
> Mounting: For DIN left and DIN right hand use > Mounting: For DIN left and DIN right hand use
> Suitable for doors with small overlay distance

Installation Installation

Herkula 315 GL-RA Herkula 315 GL-FR Herkula 316 GL-RA Herkula 316 GL-FR

Material Finish Cat. No. Material Finish Cat. No.

Herkula 315 GL-RA for blind frames Herkula 316 GL-RA for blind frames
Steel Nickel plated 922.40.170 Stainless steel Satin 922.40.303
White galvanized 922.40.190 Steel Nickel plated 922.40.370
Herkula 315 GL-FR for lining frames White galvanized 922.40.390
Steel Nickel plated 922.40.070 Herkula 316 GL-FR for lining frames
White galvanized 922.40.090 Stainless steel Satin 922.40.203
Packing: 1 or 20 pieces Steel Nickel plated 922.40.270
Packing: 2 pieces

New products and systems www.hafele.com AH 4.11

 Drill-In Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Wing part Wing part

Drill-In HingesFor interior doorsPlanning and Construction Drill-In Hinges – OthersFrame and wing parts for interior doorsPlanning and Construction

g > Area of application: For rebated wooden interior doors > Area of application: For rebated wooden interior doors
> Door weight: <40 kg > Door weight: <70 kg
> Knuckle q: 15 mm > Knuckle q: 15 mm
4 > Installation: Suitable for drill-in and screw-in machines > Drill bit q : 6.8 mm
> Drill bit q : 6.8 mm > Bearing: Maintenance-free friction bearing
> Mounting: For DIN left and DIN right hand use technology
> Mounting: For DIN left and DIN right hand use

Installation Installation

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
With frame part on lining frames With frame part on steel frames With frame part on lining frames With frame part on steel frames

Material Finish Packing Cat. No. Material Finish Packing Cat. No.
Stainless steel Satin 1 or 50 922.32.003 Stainless steel Satin 1 or 50 922.32.503
Steel Nickel plated 10 or 50 922.32.071 Steel Nickel plated 1 or 50 922.32.571

AH 4.12 New products and systems www.hafele.com

 Drill-In Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Frame part Frame part

Drill-In HingesFor interior doorsPlanning and Construction Drill-in hingesFor interior doorsPlanning and Construction

> Area of application: For wooden frames, > Area of application: For wooden frames,
for rebated and flush interior doors for rebated and flush interior doors
> Door weight: <40 kg > Door weight: <70 kg
> Knuckle q:
> Drill bit q:
> Bearing:
15 mm
7.2 mm
Maintenance-free friction bearing
> Knuckle q:
> Drill bit q:
> Bearing:
15 mm
7.2 mm
Maintenance-free friction bearing
g
technology technology
> Mounting: For DIN left and DIN right hand use > Mounting: For DIN left and DIN right hand use
> For use in combination with receiver > For use in combination with receiver
4
Installation Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish Packing Cat. No. Material Finish Packing Cat. No.
Stainless steel Satin 1 or 50 922.32.203 Stainless steel Satin 1 or 50 922.32.403
Steel Nickel plated 1 or 50 922.32.271 Steel Nickel plated 1 or 50 922.32.471

New products and systems www.hafele.com AH 4.13

 Drill-In Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Frame part
Drill-In HingesFor interior doorsPlanning and Construction

Frame part
Planning and Construction

> Area of application: For steel frames with weld-on pockets, > Area of application: For steel frames with weld-on pockets,
for rebated and flush interior doors for rebated and flush interior doors
> Door weight: <40 kg > Door weight: <70 kg

g > Knuckle q:
> Mounting:
15 mm
For DIN left and DIN right hand use
> Knuckle q:
> Bearing:
15 mm
Maintenance-free friction bearing
technology
> Mounting: For DIN left and DIN right hand use

4 Installation Installation

Material Finish Packing Cat. No. Material Finish Packing Cat. No.

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Stainless steel Satin 1 or 50 922.32.603 Stainless steel Satin 1 or 50 922.32.703
Steel Nickel plated 1 or 50 922.32.671 Steel Nickel plated 1 or 50 922.32.771

AH 4.14 New products and systems www.hafele.com

 Drill-In Hinges
Receivers
Dimensional data not binding. We reserve the right to alter specifications without notice.

VARIANT V 3610 Series Screw-on pocket 686 Receiver weld-on pocket

Drill-In and Recessed Hinges – SimonswerkReceivers and accessoriesPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice. Door Hinges for Recievers – SimonswerkFor steel framesfor flush and rebated framesPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden lining frames

> Material: Steel > Area of application: For steel frames,
> Finish: Zinc plated for flush and rebated frames
> Mounting: For DIN left and DIN right hand use > Finish: Zinc plated
> Mounting: For DIN left and DIN right hand use
Installation > Version: Hinge continuously adjustable,
Example hinge can be replaced
A Lining frame thickness
B Installation height
C Dim. X
D Rebate width
Material
Steel
Packing: 1 or 40 pieces
Cat. No.
922.39.040 g
> Dim. X = frame rebate to centre of drill
hole 4
> Installation height = dim. X + rebate
width – lining frame thickness
> Dimension X must be between 18.5
and 20.5 mm

Note
Re-drill pin holes with 7.2 mm when using VARIANT plastic drilling
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

jig and VARIANT rebate hole drilling jig.

Model Installation height Cat. No.
mm
V 3611 5.8 922.08.090
V 3612 7.8 922.08.190
V 3613 8.8 922.08.290
V 3614 9.8 922.08.390
Packing: 1 or 20 pieces
Order reference
Following items are available on request:
Mounting aids VARIANT series drilling jig metal pocket,
VARIANT rebate hole drilling jig.

Reinforcing plate, V 3610

Drill-In Hinges and Recessed HingesDrill-In Hinges and Recessed Hinges – SimonswerkReceivers and accessories – / Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden lining frames

> Material: Steel
> Finish: Zinc plated
> Mounting: For DIN left and DIN right hand use

Cat. No.
Reinforcing plate 922.08.910
Packing: 1 or 20 pieces
30.01.2020
ID 2216

New products and systems www.hafele.com AH 4.15

 Drill-In Hinges – Startec
Decorative sleeves for 2-piece drill-in hinges
Dimensional data not binding. We reserve the right to alter specifications without notice.

Drill-In Hinges – StartecDecorative sleeves for 2-piece drill-in hingesPlanning and Construction

> Area of application: For 2-piece FI 1 drill-in hinges

Material Finish Cat. No.

Plastic Matt nickel coloured 922.24.906

Polished chrome coloured 922.24.902

Polished brass coloured 922.24.908

Packing: 20 sets

FI 1 AH 4.9

f
g Einbohr- und EinfräsbänderDrill-in hinges – StartecDecorative sleeves for 2-piece drill-in hingesPlanning and Construction

> Area of application: For 2-piece FI 2 drill-in hinges

4 Material
Plastic
Finish
Matt nickel coloured
Cat. No.
922.24.916

Polished chrome coloured 922.24.912

Polished brass coloured 922.24.918

Traffic white, RAL 9016 922.24.917

Packing: 20 sets

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
FI 2 AH 4.9

Einbohr- und EinfräsbänderDrill-in hinges – StartecDecorative sleeves for 2-piece drill-in hingesPlanning and Construction

> Area of application: For 2-piece FI 5 drill-in hinges

Material Finish Cat. No.

Plastic Matt nickel coloured 922.24.936

Polished chrome coloured 922.24.932

Polished brass coloured 922.24.938

Traffic white, RAL 9016 922.24.937

Packing: 20 sets

Startec Fl 5 drill-in hinge, AH 4.10

for rebated front doors up to 120 kg

AH 4.16 New products and systems www.hafele.com

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge, size 80 mm Butt hinge, size 80 mm

Butt Hinges – StartecFor interior doorsPlanning and Construction Butt Hinges – StartecFor interior doors – / Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors For flush doors

DIN left DIN left

f
> Area of application: For wooden or metal frames,

> Door weight:

> Knuckle q:
for flush wooden or metal interior doors
<48 kg with 3 door hinges
12 mm
> Area of application: For wooden or metal frames,

> Door weight:

> Knuckle q:
for flush wooden or metal interior doors
<40 kg with 3 door hinges
12 mm
g
> Flange thickness: 2.5 mm > Flange thickness: 2.5 mm
> Bearing: With fixed pin and > Bearing: With fixed pin and
ball bearing with intermediate ring ball bearing with intermediate ring 4

Installation Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish DIN left DIN right Material Finish DIN left DIN right
Stainless steel Satin 926.20.303 926.20.203 Stainless steel Satin 926.20.503 926.20.403

Order reference Order reference

Fixing screws for wooden frames and doors supplied. Fixing screws for wooden frames and doors supplied.

New products and systems www.hafele.com AH 4.17

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge, size 100 mm Butt hinge, size 101 mm

Butt Hinges – StartecFor interior doorsPlanning and Construction Butt Hinges – StartecFor interior doorsPlanning and Construction

For flush doors Rising/falling for flush doors up to 40 kg

DIN left
f Rising DIN right A = 9 mm with 180° opening angle

g > Area of application: For wooden or metal frames,

> Door weight:

> Knuckle q:
for flush wooden or metal interior doors
<68 kg with 3 door hinges
16 mm
> Flange thickness: 3 mm
> Bearing: With fixed pin and ball bearing with
4 intermediate ring

Installation

Falling DIN right A = 9 mm with 180° opening angle

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
> Area of application: For wooden frames,
for flush interior doors
> Door weight: <40 kg
Material Finish DIN left DIN right > Knuckle q: 16 mm
Stainless steel Satin 926.20.103 926.20.003 > Pin q: 10 mm
> Flange thickness: 3 mm
Brass Polished 926.20.180 926.20.080 > Bearing: With fixed pin
Order reference
Fixing screws for wooden frames and doors supplied.
Installation

Material Finish Version DIN left DIN right

Stainless Satin Rising 926.26.003 926.26.103
steel Falling 926.26.203 926.26.303
Packing: 2 pieces

Order reference
Fixing screws for wooden frames and doors supplied.

17.10.2019
ID 2156

AH 4.18 New products and systems www.hafele.com

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

DHB 1212 Butt hinge, size 76 mm Butt hinge, size 102 mm

Butt Hinges – StartecFor interior doors – / Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice. Butt Hinges – StartecFor interior doorsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors For flush doors

> Area of application: For wooden or metal frames,

for flush wooden or metal interior doors
> Door weight:
> Knuckle q:
80 kg
14 mm
> Flange thickness: 3 mm > Area of application: For wooden or metal frames,
for flush wooden or metal doors
g
> Flange shape: Square
> Bearing: With fixed pin, > Material: Stainless steel
> Knuckle q: 15 mm
4
knuckle with two ball bearings
> Mounting: For DIN left and DIN right hand use > Flange thickness: 3 mm
> Standard: Certified in compliance with > Flange shape: Square
DIN 1935:2002 > Bearing: With separate pin,
> Class: knuckle with two ball bearings
4 7 4 1 1 4 0 11 > Mounting: For DIN left and DIN right hand use

Installation Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish/colour Cat. No. Finish Dim. A Dim. B Door weight Cat. No.
Stainless steel Satin 926.98.000 kg
Polished 926.98.001 Satin 4"/102 mm 3"/76 mm With 3 door 926.29.603
Burnished 926.98.009 hinges <58 kg
Polished brass coloured, 926.98.008 3.5"/89 mm With 3 door 926.29.703
PVD coated hinges <61 kg
Matt black, PVD coated 926.98.003 Packing: 1 or 2 pieces
Packing: 1 or 10 pieces

Order reference Order reference

Fixing screws for wooden frames and doors supplied. Fixing screws for wooden frames and doors supplied.
Please order fixing screws for metal frames and doors 020.00.136
separately.

New products and systems www.hafele.com AH 4.19

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge
Butt Hinges – StartecFor interior doors – / Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors

> Area of application: For wooden frames,

for flush interior doors
> Material: Stainless steel
> Door weight: 120 kg
> Bearing: With fixed pin,
knuckle with two ball bearings
> Mounting: For DIN left and DIN right hand
use
> Standard: Certified in compliance with
DIN 1935:2002
> Class: 4 7 6 1 1 4 0 13

Installation

4
RD = knuckle diameter

Knuckle Flange Dim. A Dim. B Model Material Satin Polished Burnished Polished Matt black,
q thickness brass PVD coated
mm mm coloured,
PVD coated

Flange shape square

12 2.5 4"/ 3"/ DHB 2122 Stainless steel, 926.98.010 926.98.011 926.98.019 926.98.018 926.98.013

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
102 mm 76 mm quality 201
DHB 2222 Stainless steel, 926.98.020 926.98.021 926.98.029 926.98.028 926.98.023
quality 304
14 3 4"/ 3"/ DHB 3122 Stainless steel, 926.98.030 926.98.031 926.98.039 926.98.038 926.98.033
102 mm 76 mm quality 201
DHB 3222 Stainless steel, 926.98.040 926.98.041 926.98.049 926.98.048 926.98.043
quality 304
DHB 3322 Stainless steel, 926.98.060 926.98.061 926.98.069 926.98.068 926.98.063
quality 316
3.5"/ DHB 5222 Stainless steel, 926.98.100 926.98.101 926.98.109 926.98.108 926.98.103
89 mm quality 304
4"/ DHB 4122 Stainless steel, 926.98.070 926.98.071 926.98.079 926.98.078 926.98.073
102 mm quality 201
DHB 4222 Stainless steel, 926.98.090 926.98.091 926.98.099 926.98.098 926.98.093
quality 304
4.5"/ 4"/ DHB 6222 Stainless steel, 926.98.110 926.98.111 926.98.119 926.98.118 926.98.113
114 mm 102 mm quality 304
5"/ 3.5"/ DHB 8222 Stainless steel, 926.98.130 926.98.131 926.98.139 926.98.138 926.98.133
127 mm 89 mm quality 304
4"/ DHB 9222 Stainless steel, 926.98.140 926.98.141 926.98.149 926.98.148 926.98.143
102 mm quality 304
15 3.5 4.5"/ 4"/ DHB 7222 Stainless steel, 926.98.120 926.98.121 926.98.129 926.98.128 926.98.123
114 mm 102 mm quality 304
Flange shape rounded
14 3 4"/ 3"/ DHB 3221 Stainless steel, 926.98.050 926.98.051 926.98.059 926.98.058 926.98.053
102 mm 76 mm quality 304
4"/ DHB 4121 Stainless steel, 926.98.080 926.98.081 926.98.089 926.98.088 926.98.083
102 mm quality 201
Packing: 1 or 10 pieces

Order reference
Fixing screws for wooden frames and doors supplied.
Please order fixing screws for metal frames and doors 020.00.136 separately.

AH 4.20 New products and systems www.hafele.com

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge Butt hinge, size 102 mm

Butt Hinges – StartecFor interior doorsPlanning and Construction Butt Hinges – StartecFor interior doorsPlanning and Construction

Narrow, current-carrying Extra heavy duty hinge for flush doors up to 160 kg

f
> Area of application: For transmitting power (24 V) from frame to > Area of application: For wooden or metal frames,
g
door, only use as middle hinge together for flush wooden or metal doors
with a pair of compatible hinges on the (stainless steel quality AISI 316)

> Material:
outer sides
Stainless steel
> Door weight:
> Knuckle q:
<160 kg
15 mm
4
> Knuckle q: 10 mm > Flange thickness: 3 mm
> Flange thickness: 2.5 mm > Bearing: Maintenance-free friction bearing
> Flange shape: Square > Mounting: For DIN left and DIN right hand use
> Door thickness: >35 mm > Standard: Certified in compliance with EN 1935:2002
> Version: With 4-core cable > Class: 4 7 7 1 1 4 1 14

Installation Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish Mounting Cat. No. Material Finish Cat. No.

Stainless steel Satin DIN left 921.09.111 Stainless steel Satin 926.94.703
DIN right 921.09.110

Order reference Order reference

Fixing screws for wooden frames and doors supplied. Available with rounded corners (radius 10 mm) on request.

New products and systems www.hafele.com AH 4.21

 Butt Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge, size 102 mm Butt hinge, size 102 mm

Butt Hinges – StartecFor interior doorsPlanning and Construction Butt Hinges – StartecFor interior doorsPlanning and Construction

For rebated doors For flush mounting

f > Area of application: For wooden or metal frames, > Area of application: For wooden or metal frames,

g > Door weight:

> Knuckle q:
for flush wooden or metal interior doors
<58 kg with 3 door hinges
14 mm > Door weight:
for flush wooden or metal interior doors,
for flush mounting
<60 kg
> Flange thickness: 3 mm > Knuckle q: 12 mm
> Bearing: With fixed pin, > Flange thickness: 2.5 mm
4 > Mounting:
knuckle with two ball bearings
For DIN left and DIN right hand use
> Bearing:
> Routing height:
Knuckle with 2 ball bearings
102 mm
> Routing depth: 2.65 mm
> Mounting: For DIN left and DIN right hand use

Installation Installation
2.5

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Material Finish Cat. No. Material Finish Cat. No.
Stainless steel Satin 926.25.803 Stainless steel 304 Satin 926.22.103
Brass Polished 926.25.880 Stainless steel 201 Satin 926.22.127

Order reference Order reference

Fixing screws for wooden frames and doors supplied. Fixing screws for wooden frames and doors supplied.

AH 4.22 New products and systems www.hafele.com

 Butt Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Butt hinge – Startec, Butt hinge

Butt HingesFor interior doorsPlanning and Construction Butt HingesFor interior doorsPlanning and Construction

size 127 mm
For flush doors

g
> Area of application: For wooden or metal frames,
for flush wooden or metal interior doors
> Door weight:
> Knuckle q:
<80 kg with 3 door hinges
14 mm 4
> Flange thickness: 3 mm
> Bearing: With fixed pin and with intermediate ring
> Mounting: For DIN left and DIN right hand use
> Routing height: 127 mm

Installation

> Area of application: For wooden or metal frames,

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

for wooden or metal interior doors,

for lightweight loads,
not suitable for very wide doors
> Material: Brass
> Knuckle q: 13 mm
> Flange thickness: 5 mm
> Bearing: With fixed pin
> Mounting: For DIN left and DIN right hand use

Material Finish Cat. No. Installation

Stainless steel Satin 926.13.903

Order reference
Fixing screws for wooden frames and doors supplied.

Dim. A Dim. B Dim. C Finish Cat. No.

mm mm mm
102 127 76 Polished 921.08.590
Chrome plated, 921.08.594
satin finish
102 152 102 Polished 921.08.610
Chrome plated, 921.08.614
satin finish

New products and systems www.hafele.com AH 4.23

 Spring Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Spring hinge Installation

Spring Hinges – StartecFor interior doorsPlanning and Construction

Loosen:
> Loosen safety lock screw on the
side of the hinge knuckle
> Press down and simultaneously

f > Area of application: For wooden or steel frames,

turn the hex socket head screw
in the hinge knuckle anti-
clockwise.

g > Version:
> Door weight:
> Knuckle q:
for flush wooden or steel interior doors
Flange width 40 or 46 mm
<60 kg with 3 door hinges
18 mm
Repeat this action until the
hinge is completely loosened.
Then install the hinges.
Tighten:
> Flange thickness: 3.4 mm
> Adjustment facility: Spring force can be adjusted and fixed > Turn the hex socket head screw
4 > Bearing: Maintenance-free friction bearing
technology
in the hinge knuckle clockwise
and adjust spring force of all
> Mounting: For DIN left and DIN right hand use hinges equally as required
> Standard: In compliance with ANSI A117.1, UL listed ! Adjustment of spring force > Re-tighten safety lock screw
" Fixing set spring force

Flange width Material Finish Cat. No.

mm
40 Steel Matt chrome plated 926.10.041
Steel Polished brass plated 926.10.080

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
46 Steel Matt chrome plated 926.10.141

Order reference
Fixing screws for wooden frames and doors supplied.

AH 4.24 New products and systems www.hafele.com

 Door Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Spring hinge Installation

Door Hinges – StartecFor interior doorsPlanning and Construction

Loosen:
> Loosen safety lock screw on the
side of the hinge knuckle
> Press down and simultaneously
turn the hex socket head screw
in the hinge knuckle anti-
clockwise.
> Area of application: For wooden or steel frames,

g
Repeat this action until the
for flush wooden or steel interior doors hinge is completely loosened.
> Door weight: <60 kg with 3 door hinges
Then install the hinges.
> Knuckle q: 18 mm
> Flange thickness: 3.4 mm Tighten:
> Adjustment facility: Spring force can be adjusted and fixed > Turn the hex socket head screw
> Bearing: Maintenance-free friction bearing in the hinge knuckle clockwise
technology and adjust spring force of all 4
> Mounting: For DIN left and DIN right hand use hinges equally as required
! Adjustment of spring force > Re-tighten safety lock screw
" Fixing set spring force

Flange width Material Finish Cat. No.

mm
40 Stainless steel Satin 926.35.003
Packing: 2 pieces
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Order reference
Fixing screws for wooden frames and doors supplied.

New products and systems www.hafele.com AH 4.25

 Double Action Spring Hinges – Startec
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Double action spring hinge

Double Action Spring Hinges – StartecFor interior doorsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors

f Size 75 mm Size 125 mm

h
g
4

Size 100 mm Size 150 mm

> Area of application: For wooden frames, for flush wooden interior doors
> Opening angle: 180° swing action on both sides
> Mounting: For DIN left and DIN right hand use

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
→ Size 75 mm, up to 15 kg → Size 125 mm, up to 27 kg
> Door weight: <15 kg > Door weight: <27 kg
> Door thickness: 18–25 mm > Door thickness: 30–35 mm
> Door height: <1,800 mm > Door height: <2,000 mm
> Door width: <600 mm > Door width: <700 mm
> Knuckle q: 22 mm > Knuckle q: 22 mm

Material Finish Cat. No. Material Finish Cat. No.

Stainless steel Satin 927.01.003 Stainless steel Satin 927.01.203
Steel Nickel plated 927.01.070 Steel Nickel plated 927.01.270
Brass plated 927.01.081 Brass plated 927.01.281
Packing: 1 pair Packing: 1 pair

→ Size 100 mm, up to 22 kg → Size 150 mm, up to 40 kg

> Door weight: <22 kg > Door weight: <40 kg
> Door thickness: 25–30 mm > Door thickness: 35–40 mm
> Door height: <1,900 mm > Door height: <2,500 mm
> Door width: <700 mm > Door width: <750 mm
> Knuckle q: 22 mm > Knuckle q: 26 mm

Material Finish Cat. No. Material Finish Cat. No.

Stainless steel Satin 927.01.103 Stainless steel Satin 927.01.303
Steel Nickel plated 927.01.170 Steel Nickel plated 927.01.370
Brass plated 927.01.181 Brass plated 927.01.381
Packing: 1 pair Packing: 1 pair

29.01.2020
ID 2169

AH 4.26 New products and systems www.hafele.com

 Double Action Spring Hinges
For interior doors

Double action spring hinge

Double Action Spring HingesFor interior doorsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors

Size 175 mm Size 250 mm

f
g
4

Size 200 mm Size 300 mm

> Area of application: For wooden frames, for flush wooden interior doors
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Opening angle: 180° swing action on both sides

> Mounting: For DIN left and DIN right hand use

→ Size 175 mm, up to 55 kg → Size 250 mm, up to 100 kg

> Door weight: <55 kg > Door weight: <100 kg
> Door thickness: 40–45 mm > Door thickness: 50–60 mm
> Door height: 2,500 mm > Door height: 2,800 mm
> Door width: 860 mm > Door width: 985 mm
> Knuckle q: 29 mm > Knuckle q: 38 mm

Material Finish Cat. No. Material Finish Cat. No.

Stainless steel Satin 927.02.503 Stainless steel Satin 927.02.703
Steel Nickel plated 927.02.571 Steel Nickel plated 927.02.771
Brass plated 927.02.580 Brass plated 927.02.780
Galvanized 927.02.590 Galvanized 927.02.790
Packing: 1 pair Packing: 1 pair

→ Size 200 mm, up to 70 kg → Size 300 mm, up to 145 kg

> Door weight: <70 kg > Door weight: <145 kg
> Door thickness: 45–50 mm > Door thickness: 60–75 mm
> Door height: 2,600 mm > Door height: 3,000 mm
> Door width: 985 mm > Door width: 1,235 mm
> Knuckle q: 34 mm > Knuckle q: 44 mm

Material Finish Cat. No. Material Finish Cat. No.

Stainless steel Satin 927.02.603 Stainless steel Satin 927.02.803
Steel Nickel plated 927.02.671 Steel Nickel plated 927.02.871
Brass plated 927.02.680 Brass plated 927.02.880
Galvanized 927.02.690 Galvanized 927.02.890
Packing: 1 pair Packing: 1 pair

New products and systems www.hafele.com AH 4.27

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

H2 Concealed mortice hinge H7 Concealed mortice hinge

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice. Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

f
h > Area of application: For wooden frames,

> Door weight:

for flush wooden interior doors
<45 kg with 2 door hinges,
> Area of application: For wooden frames,

> Door weight:

for flush wooden interior doors
<50 kg with 2 door hinges,
<60 kg with 3 door hinges <70 kg with 3 door hinges
> Opening angle: <180° > Opening angle: <180°
4 > Door width:
> Door height:
<900 mm
<2,000 mm
> Door width:
> Door height:
<900 mm
<2,100 mm
> Door thickness: >32 mm > Door thickness: >40 mm
> Size: 95 mm > Size: 111.5 mm
> Adjustment facility: Continuously 3D adjustable: > Adjustment facility: Continuously 3D adjustable:
Height: ±2.5 mm, Height: ±3 mm,
side: +3 / –2 mm and side: +3/-2 mm and
closing pressure: ±1 mm closing pressure: ±1 mm
> Hex key for adjustment supplied > Fixing material supplied
> Hex key for adjustment supplied

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Installation Installation

Routing pattern for

frame and door Routing pattern for
frame and door

Note Note
Different recess dimensions when using hinge pockets for Different recess dimensions when using hinge pockets for
lining frames. lining frames.
4 door hinges must be used for door height of 2,100 mm and above. 4 door hinges must be used for door heights of 2,400 mm and above.

Material Finish Cat. No. Material Finish Cat. No.

Zinc alloy Matt chrome plated 927.91.544 Zinc alloy Matt chrome plated 927.91.554
Matt nickel plated 927.91.546 Matt nickel plated 927.91.556
Polished gold coloured 927.91.548 Polished gold coloured 927.91.558

AH 4.28 New products and systems www.hafele.com

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

H12 Concealed mortice hinge, Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

size 120 mm
For flush doors up to 60 kg

f
4

Routing pattern for frame Routing pattern for door

Note
Fixing screws for wooden frame supplied.
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames, Material Finish Cat. No.
for flush wooden interior doors
> Door weight: <60 kg with 2 door hinges Steel Matt chrome plated 927.91.344
> Opening angle: <180°
Matt nickel plated 927.91.346
> Door width: <900 mm
> Door height: <2,100 mm Polished brass coloured 927.91.328
> Door thickness: With centred door hinge 38–45 mm Satin black 927.91.343
> Size: 120 mm
> Adjustment facility: Continuously 3D adjustable:
Height: ±3 mm, side: ±1 mm and
closing pressure: ±1 mm
Hex key for adjustment supplied

New products and systems www.hafele.com AH 4.29

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

H12 S Concealed mortice hinge, Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustable – / Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

size 110 mm
For flush doors up to 60 kg

Routing pattern for frame Routing pattern for door

Material Finish/colour Cat. No.

Steel Matt chrome plated 927.91.074

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Note Matt nickel plated 927.91.076
Fixing material supplied. Polished chrome plated 927.91.072
Polished brass coloured 927.91.078
> Area of application: For wooden frames,
for flush wooden interior doors White 927.91.077
> Door weight: <60 kg with 2 door hinges Matt black 927.91.073
> Opening angle: <180° Bronze coloured 927.91.071
> Door width: <900 mm
> Door height: <2,100 mm Packing: 1 or 2 pieces
> Door thickness: > 32 mm
> Size: 110 mm
> Adjustment facility: Continuously 3D adjustable:
Height: ±2.5 mm, page: ±1 mm and
closing pressure: ±1.5 mm

AH 4.30 New products and systems www.hafele.com

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

Concealed mortice hinge Concealed mortice hinge

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice. Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames, > Area of application: For wooden frames,
f
> Opening angle:
> Door width:
> Door height:
for flush wooden interior doors
<180°
<1,000 mm
<2,000 mm
> Opening angle:
> Door width:
> Door height:
for flush wooden interior doors
<180°
<1,000 mm
<2,000 mm
g
> Door thickness: <40 mm > Door thickness: >40 mm
> Size: 95.0 mm > Size: 111.5 mm
> Adjustment facility: Continuous 3D adjustment:
Height ±1.5 mm,
> Adjustment facility: Continuously 3D adjustable:
Height ±1.5 mm,
4
side and closing pressure ±1 mm side and closing pressure ±1 mm

Mounting Installation
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Drilling pattern
Routing pattern for
frame and door

Weight table

! 4 hinges
" 3 hinges
§ 2 hinges
Number of Door width mm
hinges 600 700 800 900 1000
2 50 kg 46 kg 42 kg 40 kg 36 kg
3 56 kg 51 kg 48 kg 45 kg 40 kg
4 63 kg 57 kg 53 kg 50 kg 45 kg

Material Finish DIN left DIN right

Zinc alloy Matt nickel plated 927.32.036 927.32.046 Material Finish DIN left DIN right
Packing: 1 or 3 pieces Zinc alloy Matt nickel plated 927.32.006 927.32.016
Polished nickel plated 927.32.007 927.32.017
Polished gold coloured 927.32.008 927.32.018

30.01.2020
ID 2219

New products and systems www.hafele.com AH 4.31

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

Concealed mortice hinge Concealed mortice hinge

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction Concealed Mortice HingesFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction

h
4

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
> Area of application: For wooden frames, > Area of application: For wooden frames,
for flush wooden interior doors for flush wooden interior doors
> Door weight: <40 kg with 2 door hinges, > Door weight: <80 kg with 2 door hinges,
<50 kg with 3 door hinges <100 kg with 3 door hinges
> Size: 120 mm > Size: 160 mm
> Door thickness: >35 mm > Door thickness: >40 mm
> Opening angle: 180° > Opening angle: 180°
> Adjustment facility: Continuously 3D adjustable: > Adjustment facility: Continuously 3D adjustable:
Height and side ±2 mm, Height ±3 mm, side +3/-2 mm and
closing pressure ±1 mm closing pressure ±1 mm

Installation Installation

Material Finish Cat. No. Material Finish/colour Cat. No.

Zinc alloy Matt chrome plated 927.91.604 Zinc alloy Matt chrome plated 927.91.634
Matt nickel plated 927.91.606 Matt nickel plated 927.91.636
Polished brass coloured 927.91.638
Satin black 927.91.633

AH 4.32 New products and systems www.hafele.com

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

CDH 40 Concealed mortice hinge Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction

Material Finish Cat. No.

Zinc alloy Matt nickel plated 927.91.666

4
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames,

for flush wooden interior doors
> Door weight: <40 kg with 2 door hinges,
<52 kg with 3 door hinges
> Door thickness: >35 mm
> Opening angle: 180°
> Adjustment facility: Continuously 3D adjustable:
Height ±2.5 mm,
side ±1 mm and closing pressure +3/–1.5 mm

17.10.2019
ID 2168

New products and systems www.hafele.com AH 4.33

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

Concealed mortice hinge Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction

Doors close automatically by means of the self closing

mechanism

f
h Material Finish Cat. No.
Zinc alloy Matt chrome plated 927.91.614
Matt nickel plated 927.91.616
4

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames,

for flush wooden interior doors
> Door weight: <60 kg with 3 door hinges
> Size: 160 mm
> Door thickness: >40 mm
> Opening angle: 180°
> Adjustment facility: Continuously 3D adjustable:
Height ±3 mm,
side +3/-2 mm and closing pressure ±1 mm,
closing force with 3 settings

AH 4.34 New products and systems www.hafele.com

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

Concealed mortice hinge Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction

Material Finish Cat. No.

h
Zinc alloy Matt chrome plated 927.91.624
Matt nickel plated 927.91.626
4
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames,

for flush wooden interior doors
> Door weight: <120 kg with 2 door hinges,
<140 kg with 3 door hinges
> Size: 200 mm
> Door thickness: >40 mm
> Opening angle: 180°
> Adjustment facility: Continuously 3D adjustable:
Height ±3 mm,
side +3/-2 mm and closing pressure ±1 mm

New products and systems www.hafele.com AH 4.35

 Concealed Mortice Hinges – Startec
For interior doors – 3D adjustable

Concealed mortice hinge Installation

Concealed Mortice Hinges – StartecFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.Planning and Construction

h
Material Finish Cat. No.
Zinc alloy Matt chrome plated 927.91.644
4 Matt nickel plated 927.91.646

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames,

for flush wooden interior doors
> Door weight: <200 kg with 2 door hinges
> Door thickness: >40 mm
> Opening angle: 180°
> Adjustment facility: Continuously 3D adjustable:
Height ±3 mm,
side +3.5/1.5 mm
and closing pressure ±1.0/-1.0 mm

AH 4.36 New products and systems www.hafele.com

 Concealed Mortice Hinges
For interior doors – Startec

Concealed mortice hinge Concealed mortice hinge

Concealed Mortice Hinges For interior doors – StartecPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice. Concealed Mortice Hinges – StartecFor interior doors Planning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

g
4
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden frames, > Area of application: For wooden frames,
for flush wooden interior doors for flush wooden interior doors
> Door weight: <45 kg with 2 door hinges > Door weight: <70 kg with 2 door hinges,
> Door thickness: >25 mm <85 kg with 3 door hinges
> Opening angle: <180° > Door thickness: >40 mm
> Material: Zinc alloy > Opening angle: <180°
> Mounting: For DIN left and DIN right hand use > Material: Zinc alloy
> Mounting: For DIN left and DIN right hand use

Finish Cat. No. Finish Cat. No.

Matt chrome 927.97.000 Matt chrome 927.97.010
Polished chrome 927.97.002 Polished chrome 927.97.012
Packing: 1 or 40 pieces Packing: 1 or 40 pieces

New products and systems www.hafele.com AH 4.37

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 240 3D N
Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Installation
Concealed mortice hinge,
size 155 mm
For flush doors up to 60 kg

On wooden block frames With mounting plate on

wooden lining frames

f
g
With receiver on steel frames

> Area of application: For wooden, steel or aluminium frames,

for flush doors
> Door weight: <60 kg
> Size: 155 mm
> Door thickness: >25 mm
> Opening angle: <180°
> Router bit q: 16 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Side and height ±3 mm,
closing pressure: ±1.5 mm
> Bearing: Maintenance-free friction bearing Routing pattern for Routing pattern for
technology
wooden block frame, frame wooden block frame, door
> Mounting: For DIN left and DIN right hand use

Note
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.

Routing pattern for

block frame, frame

Material Finish Cat. No.

Covers: Steel, Stainless steel design 924.18.904
powder coated, Silver coloured 924.18.921
link: Aluminium New silver coloured 924.18.922

Mounting plate AH 4.47

Receiver AH 4.48

AH 4.38 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 340 3D Installation

Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and Construction

Concealed mortice hinge,

size 160 mm

On wooden block frames With mounting plate on

wooden lining frames

f
g
With receiver on steel frames

> Area of application: For wooden, steel or aluminium frames,

for flush doors
> Door weight: <80 kg
> Size: 160 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Adjustment facility: Continuously 3D adjustable:

Side and height ±3 mm,
closing pressure: ±1 mm
> Mounting: For DIN left and DIN right hand use
Routing pattern for Routing pattern for
Note wooden block frame, frame wooden block frame, door
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.

Routing pattern for

block frame, frame

Calculation of routing dimensions:

A = frame rebate depth to sealing level
B = door thickness or 1. door rebate
A – B + 4 = dim. X
The result must be a dimension between 3 mm and max. 7 mm
(steel frame: X = 5 mm).

Material Finish Cat. No.

Cover plates: Steel, Stainless steel design 924.17.104

powder coated, Silver coloured 924.17.121
link: Aluminium New silver coloured 924.17.122

Mounting plate AH 4.47

Receiver AH 4.48

New products and systems www.hafele.com AH 4.39

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable

TECTUS TE 526 3D Installation

Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge,

size 155 mm
For flush doors up to 100 kg

On wooden block frames With mounting plate on

wooden lining frames

f With receiver on steel frames

g
4

> Area of application: For wooden, steel or aluminium frames,

for flush doors
> Door weight: <100 kg
> Standard: certified in compliance with
DIN EN 1935:2002
> Size: 155 mm
> Door thickness: >35 mm

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
> Opening angle: <180
> Router bit q: 24 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:
Side and height ±3 mm,
closing pressure ±1 mm
> Bearing: Maintenance-free friction bearing Routing pattern for block frame, frame (left) and block frame,
technology door (right)
> Mounting: For DIN left and DIN right hand use

Note
Material Finish Cat. No.
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available. Stainless steel Satin 924.16.803
Packing: 1 or 2 pieces

TE 526 3D mounting plate AH 4.47

TE 526 3D receiver AH 4.48

AH 4.40 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 540 3D
Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Installation
Concealed mortice hinge,
size 200 mm
For flush doors up to 120 kg

On wooden block frames With mounting plate on

wooden lining frames

With receiver on steel frames

4
> Area of application: For wooden, steel or aluminium frames,
for flush doors
> Door weight: <120 kg
> Size: 200 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Side and height ±3 mm,

closing pressure: ±1 mm
> Mounting: For DIN left and DIN right hand use
Routing pattern for Routing pattern for
Note wooden block frame, frame wooden block frame, door
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.
A = frame rebate depth to
sealing level
B = door thickness or 1. door
rebate

Routing pattern for block frame,

cross section

Calculation of routing dimensions:

The following applies for wooden block frames and wooden
lining frames: X = A – B + 4
Prerequisite for X: 4 mm < X < 6 mm
The following applies for steel frames: X = 5 mm

Material Finish Cat. No.

Covers: Steel, Stainless steel design 924.17.225
powder coated, Silver coloured 924.17.223
link: Aluminium New silver coloured 924.17.224
Packing: 1 or 2 pieces

Mounting plate AH 4.47

Receiver AH 4.48

New products and systems www.hafele.com AH 4.41

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 540 3D A8
Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Installation
Concealed mortice hinge,
size 200 mm
For flush doors up to 100 kg with doubling elements

On wooden block frames With mounting plate on

wooden lining frames

4 With receiver on steel frames

> Area of application: For wooden, steel or aluminium frames,

for doors with doubling elements
up to 8 mm
> Door weight: <100 kg
> Size: 200 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
> Adjustment facility: Continuously 3D adjustable:
Side and height ±3 mm,
closing pressure: ±1 mm
> Mounting: For DIN left and DIN right hand use

Note
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.
Routing pattern for Routing pattern for
wooden block frame, frame wooden block frame, door

Routing pattern for

block frame, cross section

Material Finish Cat. No.

Covers: Steel, Stainless steel design 924.17.325
powder coated, Silver coloured 924.17.323
link: Aluminium New silver coloured 924.17.324
Packing: 1 or 2 pieces

Mounting plate AH 4.47

Receiver AH 4.48

AH 4.42 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 640 3 D
iyConcealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Installation
Concealed mortice hinge,
size 240 mm
For flush doors up to 200 kg

On wooden block frames With mounting plate on

wooden lining frames

With receiver on steel frames

4

> Area of application: For wooden, steel or aluminium frames,

for flush doors
> Door weight: <200 kg
> Size: 240 mm
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Door thickness: >40 mm

> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:
Side and height ±3 mm,
closing pressure: ±1 mm
> Mounting: For DIN left and DIN right hand use Routing pattern for Routing pattern for
wooden block frame, frame wooden block frame, door
Note
"Energy" version for permanent and invisible energy transmission A = frame rebate depth to
from the door frame to the door leaf optionally available. sealing level
B = door thickness or 1. door
rebate
Routing pattern for
block frame, cross section

Calculation of routing dimensions:

The following applies for wooden block frames and wooden
lining frames: A – B + 4
Prerequisite for X: 4 mm < X < 6 mm
The following applies for steel frames: X = 5 mm

Material Finish Cat. No.

Covers: Steel, Stainless steel design 924.17.425
powder coated, Silver coloured 924.17.423
link: Aluminium New silver coloured 924.17.424
Packing: 1 or 2 pieces

Mounting plate AH 4.47

Receiver AH 4.48

New products and systems www.hafele.com AH 4.43

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 640 3D A8
Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Installation
Concealed mortice hinge,
size 240 mm
For flush doors up to 160 kg, with doubling elements

On wooden block frames With mounting plate on

wooden lining frames

4 With receiver on steel frames

> Area of application: For wooden, steel or aluminium frames,

for doors with doubling elements
up to 8 mm
> Door weight: <160 kg

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
> Size: 240 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:
Side and height ±3 mm,
closing pressure: ±1 mm
> Mounting: For DIN left and DIN right hand use
Routing pattern for Routing pattern for
Note wooden block frame, frame wooden block frame, door
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.

Routing pattern for

block frame, cross section

Material Finish Cat. No.

Covers: Steel, Stainless steel design 924.17.525
powder coated, Silver coloured 924.17.523
link: Aluminium New silver coloured 924.17.524
Packing: 1 or 2 pieces

Mounting plate AH 4.47

Receiver AH 4.48

AH 4.44 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable

TECTUS TE 645 3D Installation

Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge,

size 280 mm
For flush doors up to 300 kg

On wooden block frames

With receiver
on steel frames
f
g
4
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For wooden, steel or aluminium frames,

for flush doors
> Door weight: <300 kg
> Size: 280 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm
> Seal ring q: 30 mm
> Adjustment facility: Continuously 3D adjustable:
Side and height ±3 mm, Routing pattern for Routing pattern for
closing pressure: ±1 mm block frame, frame block frame, door
> Mounting: For DIN left and DIN right hand use

Material Finish Cat. No.

Covers: Steel, powder Silver coloured 924.19.004
coated link: Aluminium Stainless steel design 924.19.000

Note
"Energy" version for permanent and invisible energy transmission
from the door frame to the door leaf optionally available.

Mounting plate AH 4.47

Receiver AH 4.48

New products and systems www.hafele.com AH 4.45

 Concealed Mortice Hinges – Simonswerk
For interior doors – 3D adjustable

TECTUS TE 541 3D FVZ Installation

Concealed Mortice Hinges – SimonswerkFor interior doors – 3D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge,

size 185 mm
For flush doors up to 100 kg,
with recessed frame facing

Recessed frame facing

f
g
4

Routing pattern for Routing pattern for

> Area of application: For wooden, steel or aluminium frames, block frame, frame block frame, door

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
for flush doors with recessed frame facing
> Door weight: <100 kg
> Size: 185 mm
> Door thickness: >40 mm
> Opening angle: <180°
> Router bit q: 24 mm Material Finish Cat. No.
> Seal ring q: 30 mm Covers: Steel, Stainless steel design 924.19.010
> Adjustment facility: Continuously 3D adjustable: powder coated
Side and height ±3 mm, Silver coloured 924.19.019
closing pressure: ±1 mm link: aluminium
> Mounting: For DIN left and DIN right hand use Packing: 1 or 2 pieces

Mounting plate AH 4.47

Receiver AH 4.48

AH 4.46 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
Receivers and accessories
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 240/340/526/540/541/640 3D FZ/1 Mounting plate

Concealed Mortice Hinges – SimonswerkReceivers and accessoriesPlanning and Construction

f
g
4

TECTUS TECTUS TECTUS TECTUS TECTUS TECTUS

TE 240 3D FZ/1 TE 340 3D FZ TE 526 3D FZ/1 TE 540 3D FZ/1 TE 640 3D FZ/1 TE 541 3D FVZ FZ/1
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For TECTUS TE 240/340/526/540/640 3D/3D A8/541 3D FVZ concealed mortice hinges,
for wooden lining frames
> Material: Steel
> Finish: Galvanized
> Mounting: For DIN left and DIN right hand use

Supplied with
1 mounting plate
2 spacer plates each of 0.5, 1, 2, 3 mm
TE 526 without 0.5 mm spacer plates

Model Cat. No.

TECTUS TE 240 3D FZ/1 924.17.098
TECTUS TE 340 3D FZ 924.17.192
TECTUS TE 526 3D FZ/1 924.04.983
TECTUS TE 540 3D FZ/1 924.17.298
TECTUS TE 640 3D FZ/1 924.17.498
TECTUS TE 541 3D FVZ FZ/1 924.19.027

TECTUS TE 240 3D door hinge AH 4.38

TECTUS TE 340 3D door hinge AH 4.39
TECTUS TE 526 3D door hinge AH 4.40
TECTUS TE 540 3D door hinge AH 4.41
TECTUS TE 540 3D A8 door hinge AH 4.42
TECTUS TE 640 3D door hinge AH 4.43
TECTUS TE 640 3D A8 door hinge AH 4.44
TECTUS TE 541 3D FVZ door hinge AH 4.46

New products and systems www.hafele.com AH 4.47

 Concealed Mortice Hinges – Simonswerk
Receivers and accessories
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 240/340/526/540/541/640/645 3D (A8) SZ (SZ/1) Receiver

Concealed Mortice Hinges – SimonswerkReceivers and accessoriesPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

> Area of application: For TECTUS TE 240/340/525/526/540/541/

640/645 3D (A8)
concealed mortice hinge for steel frames
> Material: Steel
> Finish: Galvanized
> Mounting: For DIN left and DIN right hand use

Model Dim. A Dim. B Cat. No.

mm mm
TECTUS TE 240 3D SZ 205 26 924.17.099
TECTUS TE 340 3D SZ/1 225 35.5 924.17.199
TECTUS TE 526 3D SZ 205 35.5 924.05.083
TECTUS TE 540 3D SZ 248 38 924.17.299
TECTUS TE 640 3D SZ 288 38 924.17.499

f TECTUS TE 540 3D A8 SZ
TECTUS TE 640 3D A8 SZ
TECTUS TE 645 3D SZ
250
290
328
43
43
42.5
924.17.799
924.17.899
924.19.029
g TECTUS TE 541 3D FVZ SZ 235 34.5 924.19.028

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE TECTUS TE TECTUS TE TECTUS TE TECTUS TE TECTUS TE TECTUS TE TECTUS TE TECTUS TE

240 3D SZ 340 3D SZ 526 3D SZ 540 3D SZ 540 3D A8 SZ 640 3D SZ 640 3D A8 SZ 645 3D SZ 541 3D FVZ SZ

TECTUS TE 240 3D door hinge AH 4.38

TECTUS TE 526 3D door hinge AH 4.40
TECTUS TE 540 3D door hinge AH 4.41
TECTUS TE 540 3D A8 door hinge AH 4.42
TECTUS TE 640 3D door hinge AH 4.43
TECTUS TE 640 3D A8 door hinge AH 4.44
TECTUS TE 645 3D door hinge AH 4.45
TECTUS TE 541 3D FVZ door hinge AH 4.46

AH 4.48 New products and systems www.hafele.com

 Concealed Mortice Hinges – Simonswerk
Mounting aids for concealed mortice hinges
Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 240/340/526/540/640 3D and TECTUS TE 540/640 3D A8 Routing template

Concealed Mortice Hinges – SimonswerkMounting aids for concealed mortice hingesPlanning and Construction

> Area of application: For routing the hinge recesses for

TECTUS TE 240/340/526/540/640 3D,
TECTUS TE 540/640 3D A8 concealed mortice hinges
> Router bit q: 24 mm, with TE 240: 16
> Seal ring q: 30 mm

Suitable for Version Cat. No.

TECTUS TE 240 3D Wing part 924.17.600
Frame part 924.17.601
TECTUS TE 340 3D Wing and frame part, step 1 924.17.611
Wing and frame part, step 2 924.17.612
TECTUS TE 526 3D Wing and frame part 924.02.320
TECTUS TE 540 3D Wing and frame part, step 1 924.17.621
tECTUS TE 540 3D A8 Wing and frame part, step 2 924.17.622
TECTUS TE 540 3D A8 Wing and frame part, step 3 924.17.623
tECTUS TE 640 3D Wing and frame part, step 1 924.08.701
tECTUS TE 640 3D A8
TECTUS TE 640 3D A8
Wing and frame part, step 2
Wing and frame part, step 3
924.17.632
924.17.633 f
Note
Following versions are required for each hinge:

Door hinge Routing template version 4

TECTUS TE 240 3D Wing and frame part
TECTUS TE 340 3D Step 1 and 2
TECTUS TE 526 3D Wing and frame part
TECTUS TE 540 3D Step 1 and 2
TECTUS TE 540 3D A8 Step 1, 2 and 3
TECTUS TE 640 3D Step 1 and 2
TECTUS TE 640 3D A8 Step 1, 2 and 3
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

TECTUS TE 526 3D Drilling jig

Concealed Mortice Hinges – SimonswerkMounting aidsPlanning and Construction

> Area of application: For drilling the fixing holes of TECTUS TE 526 3D
concealed mortice hinge

Supplied with
1 drilling jig
1 drill bit q 3 mm

Suitable for Cat. No.

TECTUS TE 526 3D 924.02.330

TECTUS TE 240 3D door hinge AH 4.38

TECTUS TE 340 3D door hinge AH 4.39
TECTUS TE 526 3D door hinge AH 4.40
TECTUS TE 540 3D door hinge AH 4.41
TECTUS TE 540 3D A8 door hinge AH 4.42
TECTUS TE 640 3D door hinge AH 4.43
TECTUS TE 640 3D A8 door hinge AH 4.44

New products and systems www.hafele.com AH 4.49

 Concealed Mortice Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge, Concealed mortice hinge,

Concealed Mortice HingesFor interior doorsPlanning and Construction Door hinges – StartecFor interior doorsPlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

size 90 mm size 89 mm
For flush doors up to 50 kg, polyamide housing For flush doors up to 40/60 kg, polyamide housing

f
g > Area of application: For wooden frames, > Area of application: For wooden frames,
for flush wooden interior doors for flush wooden interior doors
> Door weight: <50 kg with 2 door hinges > Door weight: <40 kg with 2 door hinges,
4 > Door thickness:
> Opening angle:
>35 mm
<180° > Door thickness:
<60 kg with 3 door hinges
>35 mm
> Material: Housing: Polyamide, link and > Opening angle: <180°
screw-on plate: Stainless steel > Material: Housing: Polyamide, link and
> Mounting: For DIN left and DIN right hand use screw-on plate: Stainless steel
> Mounting: For DIN left and DIN right hand use

Installation Installation

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Routing pattern for frame and
door Routing pattern for frame and
door

Material Cat. No. Material Cat. No.

Polyamide/stainless steel 927.51.003 Polyamide/stainless steel 921.07.400

AH 4.50 New products and systems www.hafele.com

 Concealed Mortice Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge,

Concealed Mortice HingesFor interior doorsPlanning and Construction

size 90 mm
For flush doors, zinc alloy housing
Drilling pattern → Without fire protection
> Material: Housing: Zinc alloy,
link: Steel

Door Version Brass Nickel

thickness plated plated
mm
28–34 Without plastic slide plates 341.07.554 341.07.754
35–38 Without plastic slide plates 341.07.563 341.07.763
41–45 With plastic slide plates 341.07.572 341.07.772

Version with plastic slide plates

48–51 With plastic slide plates 341.07.581 341.07.781
f
> Area of application: For wooden frames,
for flush wooden or metal interior doors
g
> Version: Link with or without plastic slide plates
> Opening angle: <180°
> Mounting: For DIN left and DIN right hand use
4
Application and planning dimensions
→ With fire protection
For door thickness mm 28–34 35–38 41–45 48–51
Dim. A mm 19.4 25.6 28.5 35.6
Dim. B mm 95.0 117.0 117.5 139.1
> Material: Steel
Dim. C mm 53.0 66.0 78.0 78.0 > Standard: The use on fire resistant and smoke control doors
Dim. C1 mm 20.0 26.0 31.0 37.0 in compliance with BS 476, Part 22:1987 is
Dim. D mm 9.5 12.0 10.0 11.9 permitted
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Dim. E mm 29.0 39.0 43.0 52.0

Gap F mm 32.6 43.7 50.9 62.0 Door Version Brass Nickel
thickness plated plated
Gap G mm 4.8 6.4 6.4 7.5
mm
Gap H mm 4.0 5.5 9.5 8.0
41–45 Without plastic slide plates 927.50.505 927.50.507
Gap I mm 1.2 1.6 1.2 1.6
Order reference
Fixing material supplied.

Reference table for calculating the number of required hinges

Example:
A door 700 mm wide that weighs
45 kg and has a thickness of 41 mm
would require 3 concealed hinges
No. 341.07.572 or 341.07.772

! Door thickness in mm
" Door width in mm
§ Door weight in kg
$ Number of hinges

New products and systems www.hafele.com AH 4.51

 Concealed Mortice Hinges
For interior doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge

Concealed Mortice HingesFor interior doorsPlanning and Construction

> Area of application: For wooden or metal frames,

for flush wooden or metal interior doors
> Door weight: <25 kg, with 3 hinges
> Door height: <2,200 mm
> Door width: <900 mm
> Door thickness: >41.3 mm
> Size: 117 mm
> Opening angle: <180°
> Version: With door closer function
> Material: Steel
> Mounting: For DIN left and DIN right hand use
> Standard: The use on fire resistant and smoke control
doors in compliance with BS 476,
Part 22:1987 is permitted

Installation

g
4

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
Finish Cat. No.
Nickel plated 927.50.207

AH 4.52 New products and systems www.hafele.com

 Concealed Mortice Hinges – SFS
For interior doors – 2D adjustable
Dimensional data not binding. We reserve the right to alter specifications without notice.

CIR Concealed mortice hinge

Concealed Mortice Hinges – SFSFor interior doors – 2D adjustablePlanning and ConstructionDimensional data not binding. We reserve the right to alter specifications without notice.

For flush doors

> Area of application: For concealed mounting of flush doors

> Version: With maintenance-free bearing
> Door weight: <70 kg
> Adjustment facility: Lateral inclination each side ±3 mm,
closing pressure each ±1.5 mm
> Mounting: For DIN left and DIN right hand use

Installation

f
g
4
DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.

Material Finish Cat. No.

Steel Galvanized 927.54.090
Packing: 1 or 6 sets

Cover cap Routing jig

For CIR mortice hinge For CIR mortice hinge

> Area of application: For CIR concealed mortice hinge > Area of application: For CIR concealed mortice hinge

Material Finish Cat. No. Material Cat. No.

Plastic Matt chrome plated 927.54.141 Steel 927.54.200
Brass plated 927.54.180

New products and systems www.hafele.com AH 4.53

 Concealed Mortice Hinges
For architectural doors
Dimensional data not binding. We reserve the right to alter specifications without notice.

Concealed mortice hinge

Concealed Mortice HingesFor architectural doorsPlanning and Construction

Installation

g
4
> Area of application: For installation in wall recesses,
for flush wooden or metal doors
> Door height: <2,150 mm
> Door width: <1,200 mm
> Door thickness: 45 mm
> Size: 159 mm
> Material: Steel
> Mounting: For DIN left and DIN right hand use
> Standard: Certified for fire resistant and smoke

DGH-B-INT 2019, HDE-en, 12/18; Dimensional data not binding. We reserve the right to alter specifications without notice.
control doors in compliance with
ANSI 156.1 and NFPA 80

Note
The number of required hinges depends on the door size and door
weight.
Max. door size Max. door weight Number of
mm mm hinges
900 x 2150 68 2
900 x 2150 113 3
1200 x 2150 158 4

! DIN L
" DIN R

Finish Cat. No.

Matt chrome plated 921.07.116

AH 4.54 New products and systems www.hafele.com