1475XL

“EVO” TrenchIntel
DGPS guidance system:
Extra high precision 3D GPS system
Automatic depth and grade control
TrenchTronic 4.0
Electronic Control with:
Operator selectable digging
pressure and automatic operation
Re.M
Remote Control with:
Machine data remote monitoring
Fleet location management
Autosteering to a predefined path Fully automatic operation Troubleshooting information
Pass optimization and fleet control Remote diagnostic system Operating conditions
13 cm]]
[213
[2
+15°
7 15°
-1

TRENCHING FEATURES AND '-0"

DIMENSIONS APPLICATIONS
DOUBLE CHAIN High performance rock trencher for mid to big size pipelines, the 1475XL MODULAR
MACHINE
NARROW BOOM
EVO is the second largest Tesmec Chainsaw trencher. TrenchTronic 4.0
244-488 cm

equipped, this 630 hp powered unit can dig trenches for big-diameter
8’-16’

SAME TRACTOR FRAME

pipe up to 16’ (488 cm) deep in the toughest conditions. FOR DIFFERENT
ATTACHMENTS

30’’-48’’
DOUBLE CHAIN 76-122 cm
WIDE BOOM PIPELINE CONSTRUCTION
244-427 cm
8’-14’

UNDERGROUND POWERLINES UNDERGROUND CONNECTION

INSTALLATION NETWORKS INSTALLATION
42”-55’’
107-140 cm
LONG DISTANCE NETWORKS
INSTALLATION CHANNEL EXCAVATION

WATER AND SEWAGE NETWORKS

URBAN DRAINAGE WORKS INSTALLATION
 "B"
35'-6" Tractor W/Stabilizers
[1082cm]
17'-5"
[532cm]
13'-6"
[411cm]

[562cm] OPERATION
18'-5"
[369cm] TRANSPORT

[446cm]
14'-8"
[378cm]
'%
5/
r
he
nc

12'-1"

12'-5"
6'
Tre

[231cm]
7'-7"
17°
[71cm]
2'-4"
"A"

15'-6" 10'-7" 4'-11"

[473cm] [323cm] [151cm]

“A” “B”
8’ (244 cm) 42’-7’’ (1.298 cm)
Track 2'-6" [76cm]
10’ (305 cm) 45’ (1.372 cm)
Min 30" [76cm]
12’ (366 cm) 47’-7” (1.450 cm) Max 55" [140cm]

14’ (427 cm) 51’ (1.554 cm) 11'-6" [350cm]

16’ (488 cm) 52’-5’’ (1.597 cm)

1475XL “EVO” CHAINSAW

TECHNICAL SPECIFICATIONS
Fuel consumption.....34 gal/hr (128.8 l/hr) at full load
Standard Features Cooling rating adequate for 130° F (54.4° C) ambient air Hydraulic Transmission
Pressurized, elevating ROPS and FOPS cab with air temperature Pressure and flow compensated (load sensing)
conditioning, heating, sound suppression Air cleaner: dry type, centrifugal precleaner with primary Pump flow maximum........................45 gpm (170 l/min)
Battery box and toolbox with locking door and secondary filters Pressure setting..................................2.500 psi (172 bar)
Fuel and hydraulic tank: aircraft quality locking caps Oil tank capacity........................................191 gal (723 l)
Flywheel gearbox and hydraulic tanks: pressurized with 5 Operating and Transport Weight
psi (0.3 bar) filtered breathers Weight................204,369-240,305 lbs (92.700-109.000 kg) Cross Conveyor
Flywheel gearbox: shaved, helical gearing, case hardened Ground pressure..........18.7-22.04 psi (1.31-1.54 kg/cm2) Hydrostatic: one pump and two motors
for extreme shock load Note: dependent on configuration and options Reversible and shiftable
Vibration isolator mount: used on engine, radiator, oil cooler,
and exhaust silencer Trencher Drive Belt speed infinitely variable.....0-900 fpm (0-275 m/min)
Stabilizers / dirt drags (chainsaw only): automatically adjust Discharge direction: right or left
to terrain changes Hydrostatic: four pumps and two motors capable of Conveyor belt width................................2’ 12” (91.4 cm)
transmitting full engine horsepower Conveyor length........................................14’ 9” (450 cm)
Lights: 24 V forward facing Flywheel gearboxes, shaved, helical gearing, case hardened
Digging chain boom top roller for extreme shock load Discharge height..........................................7’ 7” (231 cm)
Hydraulic digging chain adjustment 5 operator selectable digging speed ranges:
Hydraulic cooler externally mounted Transport Dimensions
.................................................0-154 fpm (0-47 m/min)
Electrical system: 24 V ...................................................0-265 fpm (0-80 m/min) Length with crumbshoe.....8 ft boom: 42’ 7” (1.298 cm)
..................................................0-325 fpm (0-99 m/min) ................................................10 ft boom: 45’ (1.372 cm)
Trenching Dimensions .................................................0-395 fpm (0-120 m/min) ...........................................12 ft boom: 47’ 7” (1.450 cm)
DOUBLE CHAIN NARROW BOOM .................................................0-443 fpm (0-135 m/min) ................................................14 ft boom: 51’ (1.554 cm)
• Max depth...................................................16’ (488 cm) Tailwheel diameter..........................................4’ (122 cm) ............................................16 ft boom: 52’ 5” (1.597 cm)
• Widths range................................30”-48” (76-122 cm) Cutters: rotary carbide tipped 1 ½” (3.81 cm) shank Length without boom:
DOUBLE CHAIN WIDE BOOM diameter only tractor with stabilizers..................35’ 6” (1.082 cm)
• Max depth..................................................14’ (427 cm) Digging chain: D9L Width with digging motors............................13’ 6” (411 cm)
• Widths range..............................42”-55” (107-140 cm) Width without digging motors....................11’ 6” (350 cm)
Note: dependent on configuration and options Crawler Drive Height with cab........................................12’ 5” (378 cm)
Dual path, hydrostatic drive, planetary transmissions Height with cab elevated........................14’ 8” (446 cm)
Engine capable of full counter rotation with single lever steering,
single lever direction Main Available Devices
HIGHLY REGULATED COUNTRIES (EU, USA) Infinitely variable speed: forward and reverse: ALL001 Air compressor
Model...................CAT C18 ACERT Tier 4 final/Stage IV • High range..........................0-1.54 mph (0-2.47 km/hr) ALL003 Side mounted truck loading conveyor - not foldable
Max horsepower....................................630 hp (470 kW) • Low range..........................0-0.77 mph (0-1.24 km/hr) and within transport dimension
Max no load rpm..............................................2.000 rpm Integral parking and service brake: spring applied, hydraulic ALL010 Automatic greasing
Fuel tank capacity.....................................420 gal (1.590 l) release, wet disc brake ALL012 Safety devices
Urea tank capacity........................................25 gal (94.6 l) ALL015 Pneumatic greasing
Fuel consumption.....32.5 gal/hr (122.9 l/hr) at full load Tracks OPT002 Fuel pump
Estimated max urea consumption at full load.............. Overall track length.......................................15’ 6” (473 cm) OPT005 Laser automatic system for depth control
................................................3,5% of fuel consumption Track pad type: double demi-grouser (single grouser OPT008 Rubber track pads
Cooling rating adequate for 130° F (54.4° C) ambient air available as option)
temperature OPT011 Subscription for the Remote Asset Management
Track chain type: Caterpillar 365/374 (1” 1/8 bolts) (monitoring via GPRS) per year
Air cleaner: dry type, centrifugal precleaner with primary Track pad width..................................................2’ 6” (76 cm)
and secondary filters OPT012 Work light package
OPT014 Video Camera
LESSER-REGULATED COUNTRIES OPT015 3DGPS System for automatic machine guidance
Model...............................................CAT C18 ACERT Tier 3 OPT023 Remote control for maintenance
Max horsepower.....................................630 hp (470 kW) OPT025 Oil pump
Max no load rpm...............................................2.000 rpm
For a complete devices list see the Available Devices chart
Fuel tank capacity...................................420 gal (1.590 l)
Keep you updated on: www.tesmec.com
04/18 PICTURES & DRAWINGS CAN BE DIFFERENT ACCORDING TO TECHNICAL SPECIFICATIONS - UPDATING PROGRAMME VARIATIONS WITHOUT NOTICE ARE POSSIBLE