300mA L.D.

O VOLTAGE REGULATOR TJ1117GSF

FEATURES
 Output Current up to 300mA
 MLCC, Aluminum electrolytic capacitor applicable
 Three Terminal Adjustable(ADJ) or Fixed 1.2V, 1.5V, 1.8V,
2.5V, 3.3V, 5.0V
 Line Regulation typically at 0.1% max. SOT-23 PKG
 Load Regulation typically at 0.2% max.
2
 Internal Current and Terminal Protection
 Surface Mount Package SOT-23 1
3
 Moisture Sensitivity Level 3

APPLICATION ORDERING INFORMATION

 Active SCSI Terminators Device Package
 Portable/ Plan Top/ Notebook Computers TJ1117GSF-ADJ
SOT-23-3L
TJ1117GSF-X.X
 High Efficiency Linear Regulators X.X = Output Voltage = 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V
 SMPS Post Regulators
 Mother B/D Clock Supplies
 Disk Drives
 Battery Chargers

DESCRIPTION
The TJ1117 is a low power positive-voltage regulator designed. This device is an excellent choice for use in
battery-powered applications, as active terminators for the SCSI bus, and portable computers. The TJ1117
features low quiescent current and low dropout voltage of 1.2V at a full load and lower as output current
decreases. TJ1117 is available as an adjustable or fixed 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, and 5.0V. The TJ1117 is
offered in a 3-pin surface mount package SOT-23. The output capacitor is needed for output stability of TJ1117 as
required by most of the other regulator circuits.

Absolute Maximum Ratings

(TA = 25℃, unless otherwise specified)
CHARACTERISTIC SYMBOL MIN. MAX. UNIT
DC Input Voltage VIN - 20 V
Lead Temperature (Soldering, 5 seconds) TSOL - 260 ℃
Operating Junction Temperature Range TOPR -40 125 ℃
Storage Temperature Range TSTG -65 150 ℃

Jul. 2015 R3.0 -1- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

Ordering Information
VOUT Package Order No. Supplied As Status
ADJ SOT-23 TJ1117GSF-ADJ Reel Active
1.2V SOT-23 TJ1117GSF-1.2 Reel Contact us
1.5V SOT-23 TJ1117GSF-1.5 Reel Contact us
1.8V SOT-23 TJ1117GSF-1.8 Reel Contact us
2.5V SOT-23 TJ1117GSF-2.5 Reel Contact us
3.3V SOT-23 TJ1117GSF-3.3 Reel Active
5.0V SOT-23 TJ1117GSF-5.0 Reel Contact us

TJ 1117

Output Voltage : ADJ / 1.2 / 1.5 / 1.8 / 2.5 /

3.3 / 5.0

Package Type SF : SOT-23

G : Halogen Free
Green Mode
Blank : Pb Free

Root Name

Product Code

Jul. 2015 R3.0 -2- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

PIN CONFIGURATION

VOUT
2

1 3

GND/ADJ VIN

SOT-23

PIN DESCRIPTION

SOT-23
Pin No.
Name Function

1 ADJ/GND Adjustable / Ground

2 VOUT Output Voltage

3 VIN Input Voltage

Typical Application Circuit

TJ1117-X.X
Vin VIN VOUT Vout

CIN COUT
10uF 10uF
GND

Jul. 2015 R3.0 -3- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF
ELECTRICAL CHARACTERISTICS

For ADJ Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VREF Reference Voltage VIN=5V, IO=10mA 1.238 1.250 1.262 V

IO = 10mA to 300mA, VIN - VREF = 1.5V

VREF Reference Voltage 1.219 1.281 V
to 13.75V (TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 10mA , VIN - VREF = 1.5V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 10mA to 300mA, VIN - VREF = 2 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

IADJ Adjustment pin Current VIN - VREF = 1.5V to 12V, IO = 100mA 35 120 uA

Adjustment Pin Current VIN - VREF = 1.5V to 12V,

ΔIADJ 0.5 5 uA
Change IO = 100mA to 300mA

IO(MIN) Minimum Load Current VIN=5V, VREF=0V 5 10 mA

IO Current Limit VIN - VREF = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 0.003 %

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VREF = 3V, VRIPPLE = 1VPP

For 1.2V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 2.7V, IO = 10mA 1.176 1.200 1.224 V

VIN = 2.7V to 12V, IO = 0mA to 300mA

VO Output Voltage 1.152 1.248 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 2.7V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 10mA to 300mA, VIN = 3.2V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 0.003 %

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 1.5V, VRIPPLE = 1VPP

Jul. 2015 R3.0 -4- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF
For 1.5V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 3.0V , IO = 10mA 1.485 1.5 1.515 V

VIN = 3.0V to 12V, IO = 0mA to 300mA

VO Output Voltage 1.470 1.530 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 3.0V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 0mA to 300mA, VIN = 3.5 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 100 uV

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 3V, VRIPPLE = 1VPP

For 1.8V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 3.3V, IO = 10mA 1.782 1.8 1.818 V

VIN = 3.3V to 12V, IO = 0mA to 300mA

VO Output Voltage 1.764 1.836 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 3.3V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 0mA to 300mA, VIN = 3.8 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 100 uV

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 3V, VRIPPLE = 1VPP

Jul. 2015 R3.0 -5- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF
For 2.5V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 4.0V, IO = 10mA 2.475 2.5 2.525 V

VIN = 4.0V to 12V, IO = 0mA to 300mA

VO Output Voltage 2.450 2.550 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 4.0V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 0mA to 300mA, VIN = 4.5 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 100 uV

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 3V, VRIPPLE = 1VPP

For 3.3V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 4.8V, IO = 10mA 3.267 3.3 3.333 V

VIN = 4.8V to 12V, IO = 0mA to 300mA

VO Output Voltage 3.234 3.366 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 4.8V to 12V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 0mA to 300mA, VIN = 5.3 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 100 uV

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 3V, VRIPPLE = 1VPP

Jul. 2015 R3.0 -6- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF
For 5.0V Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VO Output Voltage VIN = 6.5V, IO = 10mA 4.950 5.0 5.050 V

VIN = 6.5V to 15V, IO = 0mA to 300mA

VO Output Voltage 4.900 5.100 V
(TJ = 0 ~ 125℃)

ΔVLINE Line Regulation IO = 0mA , VIN = 6.5V to 15V 0.1 0.2 %

ΔVLOAD Load Regulation IO = 0mA to 300mA, VIN = 7.0 V 0.2 0.4 %

VIN Operating Input Voltage 12 V

ID Quiescent Current VIN - VO = 5V 5 10 mA

IO Current Limit VIN - VO = 5V 1000 1250 1600 mA

EN Output Noise(%VO) B = 10Hz to 10kHz, TJ = 25℃ 100 uV

IO = 300mA, f = 120Hz,
SVR Supply Voltage Rejection 60 75 dB
VIN - VO = 3V, VRIPPLE = 1VPP

For All Output Voltage (TA=25℃, CIN = CO = 10uF unless otherwise specified)

Symbol Parameters Condition Min. Typ. Max. Unit

VD Dropout Voltage IO = 300mA 1.3 V

Temperature Stability 0.5 %

Long Term Stability 1000 hrs, TJ = 125℃ 0.3 %

Thermal Regulation TA = 25℃ 30ms Pulse 0.003 %/W

Jul. 2015 R3.0 -7- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

APPLICATION CIRCUIT

TJ1117

Fig.1 300mA Current Output

TJ1117-
ADJ

Fig.2 Typical Adjustable Regulator

TJ1117-
5.0

Fig.3 Negative Supply

Jul. 2015 R3.0 -8- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

TJ1117-
1.5

Fig.4 Active Terminator for SCSI-2BUS

TJ1117-
5.0

Fig.5 Voltage Regulator with Reference

TJ1117
-5.0

TJ1117
-5.0

Fig.6 Battery Backed-up Regulated Supply

Jul. 2015 R3.0 -9- HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

TYPICAL OPERATING CHARACTERISTICS

OUTPUT VOLTAGE CHANGE vs. TEMPERATURE DROPOUT VOLTAGE vs. OUTPUT CURRENT

ADJ PIN CURRENT vs. AMBIENT TEMPERATURE QUIESCENT CURRENT CHANGE vs. AMBIENT TEMPERATURE

Jul. 2015 R3.0 - 10 - HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

VOUT = 3.3V VOUT = 3.3V

QUIESCENT CURRENT vs. INPUT VOLTAGE QUIESCENT CURRENT vs. OUTPUT CURRENT

VOUT = 3.3V VIN = 4.6V, VOUT = 3.3V

OUTPUT VOLTAGE vs. INPUT VOLTAGE OUTPUT VOLTAGE vs. OUTPUT CURRENT

Jul. 2015 R3.0 - 11 - HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

APPLICATION INFORMATION

Maximum Output Current Capability

The TJ1117 can deliver a continuous current of 300mA over the full operating junction temperature range.
However, the output current is limited by the restriction of power dissipation which differs from packages. A heat
sink may be required depending on the maximum power dissipation and maximum ambient temperature of
application. With respect to the applied package, the maximum output current of 300mA may be still
undeliverable due to the restriction of the power dissipation of TJ1117. Under all possible conditions, the
junction temperature must be within the range specified under operating conditions. The temperatures over the
device are given by:

TC = TA + PD X θCA / TJ = TC + PD X θJC / TJ = TA + PD X θJA

where TJ is the junction temperature, TC is the case temperature, TA is the ambient temperature, PD is the
total power dissipation of the device, θCA is the thermal resistance of case-to-ambient, θJC is the thermal
resistance of junction-to-case, and θJA is the thermal resistance of junction to ambient. The total power
dissipation of the device is given by:

PD = PIN – POUT = (VIN X IIN)–(VOUT X IOUT)

= (VIN X (IOUT+IGND)) – (VOUT X IOUT) = (VIN - VOUT) X IOUT + VIN X IGND

where IGND is the operating ground current of the device which is specified at the Electrical Characteristics.
The maximum allowable temperature rise (TRmax) depends on the maximum ambient temperature (TAmax) of
the application, and the maximum allowable junction temperature (TJmax):

TRmax = TJmax – TAmax

The maximum allowable value for junction-to-ambient thermal resistance, θJA, can be calculated using the
formula:

θJA = TRmax / PD = (TJmax – TAmax) / PD

TJ1117 is available in SOT23 package. The thermal resistance depends on amount of copper area or heat sink,
and on air flow. If the maximum allowable value of θJA calculated above is over 300°C/W for SOT-23 package,
no heat sink is needed since the package can dissipate enough heat to satisfy these requirements. If the value
for allowable θJA falls near or below these limits, a heat sink or proper area of copper plane is required. In
summary, the absolute maximum ratings of thermal resistances are as follow:

Absolute Maximum Ratings of Thermal Resistance

Characteristic Symbol Rating Unit

Thermal Resistance Junction-To-Ambient / SOT-23 θJA-SOT-23 300 °C/W
2
No heat sink / No air flow / No adjacent heat source / 0.066 inch copper area. (TA=25°C)

Jul. 2015 R3.0 - 12 - HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

In case that there is no cooling solution and no heat sink / minimum copper plane area for heat sink, the
maximum allowable power dissipation of each package is as follow;

Characteristic Symbol Rating Unit

Maximum Allowable Power Dissipation at TA=25°C / SOT-23 PDMax-SOT-23 0.333 W

- Please note that above maximum allowable power dissipation is based on the minimum copper
plane area which does not exceed the proper footprint of the package. And the ambient
temperature is 25°C.

If proper cooling solution such as heat sink, copper plane area, air flow is applied, the maximum allowable
power dissipation could be increased. However, if the ambient temperature is increased, the allowable
power dissipation would be decreased.

Jul. 2015 R3.0 - 13 - HTC

300mA L.D.O VOLTAGE REGULATOR TJ1117GSF

REVISION NOTICE

The description in this data sheet can be revised without any notice to describe its electrical characteristics
properly.

Jul. 2015 R3.0 - 14 - HTC