Scribd
Upload
711 views2 pages

Shell Risella X 420: Specifications, Approvals & Recommendations

Shell Risella X 420 is a hydrocarbon fluid based on Shell Gas-to-Liquid Technology. It is highly saturated with a high degree of iso paraffinic structures and is almost odourless and very stable in color. It has a viscosity index of 130, flashpoint of 230°C, and pour point of -36°C. Shell Risella X 420 meets FDA purity requirements for technical white oil and is unlikely to present health or safety hazards when properly used, though skin contact should be avoided and good hygiene practices followed.

Uploaded by

HUM CIREBON DFLTS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
711 views2 pages

Shell Risella X 420: Specifications, Approvals & Recommendations

Shell Risella X 420 is a hydrocarbon fluid based on Shell Gas-to-Liquid Technology. It is highly saturated with a high degree of iso paraffinic structures and is almost odourless and very stable in color. It has a viscosity index of 130, flashpoint of 230°C, and pour point of -36°C. Shell Risella X 420 meets FDA purity requirements for technical white oil and is unlikely to present health or safety hazards when properly used, though skin contact should be avoided and good hygiene practices followed.

Uploaded by

HUM CIREBON DFLTS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Shell Risella X 420


GtL Technical White Oil

Shell Risella X 420 is a hydocarbon fluid based on Shell Gas-to-Liquid Technology. It´s highly saturated with a
high degree of iso paraffinic structures and is almost odourless and very stable in colour.

Specifications, Approvals & Recommendations


For a full listing of equipment approvals and
recommendations, please consult your local Shell
Technical Helpdesk.

Typical Physical Characteristics

Properties Method Shell Risella X 420


Colour (Saybolt) ASTM D156 +30

Density @ 150C kg/m3 ISO 12185 816

Refractive Index 0
@ 20 C ASTM D1218 1.454

Viscosity Index ISO 2909 130

Flashpoint COC 0
C ISO 2592 230

Pour Point 0
C ISO 3016 -36

Kinematic Viscosity 0
@ 20 C mm /s2 ISO 3104 40

Kinematic Viscosity 0
@ 40 C mm /s2 ISO 3104 18.0

Kinematic Viscosity @ 100 C 0


mm /s2 ISO 3104 4.1

Aniline Point 0
C ISO 2977 120

Sulphur mg/kg ISO 14596 <5

Evaporation Loss 22h/107 C 0


%m ASTM D972 0.12

Noack Volatility 1h/250 C 0


%m ASTM D5800 12

Purity Requirements for Technical White Oil FDA 178.3620 (b) Pass

These characteristics are typical of current production. Whilst future production will conform to Shell's specification,
variations in these characteristics may occur.

Health, Safety & Environment

· Health and Safety

Shell Risella X 420 is unlikely to present any significant health or safety hazard when properly used in the recommended
application and good standards of personal hygiene are maintained.

Avoid contact with skin. Use impervious gloves with used oil. After skin contact, wash immediately with soap and water.

Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from your
Shell representative.

· Protect the Environment

Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Page 1 of 2 Risella X 420 , v 2.2 08.07.2015.14.09


Additional Information

· Advice
Advice on applications not covered here may be obtained from your Shell representative.

Page 2 of 2 Risella X 420 , v 2.2 08.07.2015.14.09

You might also like