Gas

G65 and G100

Diaphragm Meters
The diaphragm meters G65 and G100 are designed for industrial applications.
The design is based on high measuring accuracy and a long lifetime and are maintenance free.
This performance is made possible through the principle of two measuring chambers, which are driven by
the pressure of the gas. The measured volume is displayed on a numeric totalizer.

Features
Measuring Range G65 Qmin 0.65 m3/h
Qmax 100 m3/h
G100 Qmin 1.00 m3/h
Qmax 160 m3/h
European Metrological Approval Approval achieved by the Dutch NMI
(71/318/EEC) Approval N° NL79 E53
(04/22/EC) Approval N° T10100
Temperature Range -5°C to +35°C (-10°C to +40°C accordant with MID)
Maximum Operating Pressure 500 mbar
High Temperature Loading (HTL) The meter can be delivered, as an option, with a HTL version PN0.1
Connections Double and single flange connections, DN80 for G65 and DN100 for G100
All according to DIN2642 or DIN2576 (G100 single pipe)
Coupling / Index box Stuffing box with Sardine Index box or Magnet Coupling with RF1 Index box
8-digit index with IP 54 protection
UV resistant cover
> Single Pipe Fitted with a reflecting disc in the first drum to facilitate preiodical checks
welded type Reverse flow device The meter is equippped with a device which prevents registration of reverse flow
Housings Welded (G65 & G100) or Drawn (G65) with powder coating
Colour RAL 7032 or RAL 7035

Technical design
Totaliser Measuring unit
A direct or indirect driven register, depending on the The measuring unit consists of two chambers with
type of coupling between the measuring unit and synthetic and gas-tight diaphragms, which is
the index box, indicates the passed volume of gas. moved by the differential between the inlet and
Both index box-constructions are designed in such outlet pressure. A transmission gear and a
> Double Pipe a way that it’s almost impossible to access the magnetic coupling / stuffing box transfer the
welded type
registers without damaging them. reciprocating motion to the mechanical index.
The unit is built in a robust steel coated casing,
either drawn or welded.

> Sardine-Indexbox

> Double Pipe drawn type

> Long term accuracy and

reliability
> Robust, maintenance free meter
> MID approved
> RF1-Indexbox > Measuring unit
> Wide measuring range
> Low pressure loss

w w w . i t r o n . c o m
 Gas

Technical design (cont’d)

Accuracy
In accordance with the EC and OIML standards.
In line with EC standards, the tolerance of acceptation is +/-3 % from Qmin to 0.2 Qmax and +/-1.5%
from 0.2 Qmax to Qmax.

Typical error curve

Error in %
4
3
2
1
0
-1
-2
-3
-4
0 10 20 30 40 50 60 70 80 90 100
EC Accuracy Error in % % Flow rate (m3/h)

Every meter undergoes a 100% inspection for function, accuracy and safety.
All meters are EN1359 compliant and have DVGW approval.

LF pulse-emitter
Meter versions with the sardine index box are standard equipped with a LF pulse-emitter.
1 pulse is 0.1m3 (G65) or 1 m3 (G100).
The 4 pins male-connector is fixed in a “D”-hole in the index box. The female contra- connector is supplied
with each meter.
The RF1 index box is available with a permanent magnet in one of the index drums as standard and can be
refitted with a pulse transmitter (reed switch).

G65-G100 vertical version

Dimensions and Technical Data
d b
c a Type Nozzle type Q min Qmax Vol. Pmax Flange a b c d h Weight
m3/h m3/h dm3 bar DN mm mm mm mm mm kg
G65 Welded 0.65 100 55 0.5 80 500 700 216 436 721 65
G65 Welded 0.65 100 55 0.5 80 640 840 216 436 805 69
G65 Drawn 0.65 100 55 0.5 80 500 700 217 445 687 48
G65 Drawn 0.65 100 55 0.5 80 640 840 216 445 790 52
h

G65 Welded - EP 0.65 100 55 0.5 80 N/A 700 216 436 737 71
G100 Welded 1 160 123 0.5 100 675 894 257 532 885 105
G100 Welded 1 160 123 0.5 100 710 894 257 532 885 105
G100 Welded– EP 1 160 123 0.5 100 N/A 894 257 532 920 113
EP = Single nozzle.
> Double Pipe Welded (500)

d b d b
d b c a
c
c a
h
h
h

> Double Pipe Drawn (500) > Single Pipe Welded > Double Pipe Welded (640)
G65 horizontal version
This version, which has also the same G65 internal parts as the other G65 meters, is standard equipped
with magnet coupling and RF1-Index box.
d a
c b
Dimensions and Technical Data
Type Nozzle type Q min Qmax Vol. Pmax Flange a b c d hl h Weight
m3/h m3/h dm3 bar DN mm mm mm mm mm mm kg
G65 Welded 0.65 100 55 0.5 80 680 654 212 432 400 626 69

h
h1
Options
On request the following options are possible

> Thermowell
> Other flange dimensions
> Backrun stop to prevent reverse-flow
> LF pulse-emitter with Binder connector (normal or anti-fraude) on the sardine index box versions
> Retrofit pulse-emitter on the RF1 index box versions
> Counter flanges for both Double and Single Pipe versions

> G65 horizontal version

Information to be
specified when ordering
- Nature of gas
- Size of meter (G65 or G100)
- Coupling index box type
- Maximum working pressure
- Version (horizontal or vertical)
- Connections type
- Accessories and options
About Itron Inc.
Itron Inc. is a leading technology provider to the global energy and water industries. Our company is the world’s leading provider of metering, data collection and utility software solutions,
with nearly 8,000 utilities worldwide relying on our technology to optimize the delivery and use of energy and water. Our products include electricity, gas and water meters, data collection
and communication systems, including automated meter reading (AMR) and advanced metering infrastructure (AMI); meter data management and related software applications; as well
as project management, installation, and consulting services. To know more, start here: www.itron.com

For more information, contact your local sales representative or agency.

Itron GmbH
Hardeckstrasse 2
D-76185 Karlsruhe
Germany
Phone: + 49-721 5981 0
Fax: + 49-721 5981 189
www.itron.com

© Copyright 2009, Itron. All Rights Reserved. - Itron reserves the right to change these specifications without prior notice. Publication: GA-G65-G100-EN-V1.0-2009.07