Scribd
Upload
1K views2 pages

Metalworking Fluid for Machining

Vasco 6000 is a water-miscible metalworking fluid based on ester oil that is free of boron, formaldehyde and chlorine. It has been developed for demanding machining conditions and ensures extremely robust performance and the finest surfaces. It is suitable for general to heavy machining of various metals and maintains cleanliness. The fluid has high cutting performance through ester oil properties, low foam formation from 5°dH hardness onwards, and excellent rinsing behavior while being free of bactericides.

Uploaded by

Bruno Gomes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Metalworking Fluid for Machining

Vasco 6000 is a water-miscible metalworking fluid based on ester oil that is free of boron, formaldehyde and chlorine. It has been developed for demanding machining conditions and ensures extremely robust performance and the finest surfaces. It is suitable for general to heavy machining of various metals and maintains cleanliness. The fluid has high cutting performance through ester oil properties, low foam formation from 5°dH hardness onwards, and excellent rinsing behavior while being free of bactericides.

Uploaded by

Bruno Gomes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Art.No.

02860-02
Vasco 6000

Description Vasco 6000 is a water-miscible metalworking fluid based on ester oil, free of boron, formaldehyde and
chlorine. This modern universally applicable product with a high proportion of additives has been
specially developed for demanding conditions of general machining. The stability of this resilient
coolant ensures an extremely robust performance. Additionally, its specific lubricating properties
guarantee the finest surfaces, at the same time maintaining cleanliness of parts and machines.
Suitable for central systems as well as individually filled machines.

Range of application For general to heavy machining of titanium, nickel-based alloys, alloyed steel, steel, cast steel, cast
iron and cast aluminium alloys (AlSi 6/12)
A water hardness of 5° is recommended for optimal foam behavior.

Product properties Benefits


High cutting performance thanks to the High machining volume and best surface quality even

properties of ester oil for heavy operations and materials

Low foam formation from 5°dH (90 ppm) High pressure applications

onwards For soft and hard water
Clean parts and machines
Excellent rinsing behaviour 
Economical due to low consumption
Free of bactericides  Good human and skin compatibility

Concentrate Emulsion
Physical-chemical data

Colour light brown - orange milky


Mineral oil content n/a ester based
Density at 20°C 0.99 g/cm3
Viscosity at 40°C 42 mm2/s
Flash point 129°C
pH-value 8.9 – 9.5
Refractometer factor 1.5

The product does not contain:*


Note
Mineral oil, Chlorine, hard Metals, Boron, secondary Amines, Silicones, Bactericides, Formaldehyde,
Nitrosamines, Glycol ether.

*The substances listed here are not part of the formula, but trace amounts of these substances may be
present.

Recommended Antifoam: Additive A38 art. 29182-01.


Variable concentrations from 5% to max. 15%. (refractometer reading: 3.3 – 10.0%)
Concentration of use

- Best cutting performance machining: 8% - 15% (refractometer reading: 5.3 – 10.0%)


This product is limited suitable for grinding applications, please contact our customer service / sales
department.
For the first filling we recommend to use water with a minimum hardness of 5°dH (90 ppm),
to get an optimal foam behaviour.

Variable concentration of use


11
10
Refractometer reading (% brix)

9
8
7
6
5
4
3
2
1
5 6 7 8 9 10 11 12 13 14 15
Concentration of use (%)

Information contained in this data sheet is based upon the properties and applications of use as known to us. However, generally no
legal liability may be deducted from such information.
V04 // 05.07.2018

You might also like