FEATURE PRODUCTS

For high performance fire fighting equipment, visit www.protekfire.com.tw

IRCS Style 325

Integrated Remote Control System Multi-Mode Nozzle
(see page 76) (See page 11)

Style 355 Style 661

Low Pressure Selectable Gallonage Nozzle Industrial Monitor
(See page 24) (See page 63)

Style 542 Style 372-F

Multi-Purpose Wye Low Pressure Constant Gallonage Nozzle
(See page 82) (See page 23)
ABOUT PROTEK PROTEK MANUFACTURING CORP.

About Protek
 
Protek Manufacturing Corp. is a leader in providing high performance fire fighting equipment. Since 1972,
Protek has adhered to three operating principles of delivering high-quality products, creating value for
our customers and providing exceptional service.
 
Headquartered in Taichung, Taiwan, Protek has established manufacturing capability and management to
deliver quality, value and service to all our customers. From employing new technologies to testing each
and every product before shipment, Protek takes pride in its products as customers worldwide can attest.
 
Protek is constantly improving existing products and developing new products in order to meet the
challenges of the fire industry. From new-generation multi-mode nozzles to wireless remote controlled
monitors, we have continually developed products that are tailored to the evolving needs of our
customers.
 
Protek is committed to delivering products of the highest quality and value for our customers, exceptional
service and effective manufacturing processes. Protek strives to exceed customers’ expectations at all
times and continue its position as an industry leader.

Quality and Certifications

 
Protek is proud to be ISO 9001:2008 registered with the internationally recognised Underwriter
Laboratories Inc. (UL). This accomplishment reflects our relentless dedication to quality in our products,
excellence in our manufacturing processes and service for our customers.
 
Protek has received FM approvals for a wide range of our nozzles and monitors. Recognised and respected
across the globe, the FM approvals are a testament that our products have been objectively tested and
conform to the highest standards.In addition, Protek has received US Coast Guard approval for selected
marine nozzles.
 
Protek is committed to ensure NFPA 1964 compliance. All of Protek nozzles are designed and tested to
comply with NFPA 1964.In addition, we are EN 15182-2 Type 3 and DIN 14367 compliant across our
selected range of handline nozzles.
 
As part of Protek’s focus on quality, we are continually assessing our products and renewing our
certifications.
Customer Sales: [email protected]
Customer Service: [email protected]
Technical Support: [email protected]

Visit our official worldwide website!

www.protekfire.com.tw

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TABLE OF CONTENTS
TABLE OF CONTENTS

HANDLINE NOZZLES MONITORS

Selectable Gallonage Nozzles . . . . . . . . . . . . 2-7 Industrial Ground Monitors . . . . . . . . . . . . 57-63
EN Selectable Gallonage Nozzles . . . . . . . . . 8-9 Portable Ground Monitors . . . . . . . . . . . . . 64
Multi-Mode Nozzles . . . . . . . . . . . . . . . . . . . . . 10-11 Dual-Purpose Ground Monitors . . . . . . . . 65-67
Multi-Purpose Nozzles . . . . . . . . . . . . . . . . . . 12-13 Portable Oscillating Ground Monitors . . . 68
Automatic Nozzles . . . . . . . . . . . . . . . . . . . . . . . 14-17 Monitor Accessories . . . . . . . . . . . . . . . . . . . 69-70
Constant Gallonage Nozzles . . . . . . . . . . . . . . 18-21 Remote Control Monitor . . . . . . . . . . . . . . . 71-72
Low Pressure Nozzles . . . . . . . . . . . . . . . . . . . 22-24 Wireless Remote Control Monitors . . . . . 73-75
High Pressure Nozzles . . . . . . . . . . . . . . . . . . . 25-26 Integrated Remote Control System . . . . . 76-78
Shockless Nozzles . . . . . . . . . . . . . . . . . . . . . . . 27
Retractable Foam Nozzles . . . . . . . . . . . . . . . 28-30 FOAM EQUIPMENT
Self-Educting Handline Nozzles . . . . . . . . . . 31-32 Retractable Foam Nozzles . . . . . . . . . . . . . . 28-30
Dual-Flow Foam Nozzle . . . . . . . . . . . . . . . . . 32 Self-Educting Handline Nozzles . . . . . . . . . 31-32
Dual-Agent Nozzle . . . . . . . . . . . . . . . . . . . . . . . 33 Dual-Flow Foam Nozzle . . . . . . . . . . . . . . . . 32
Dry Chemical Nozzle . . . . . . . . . . . . . . . . . . . . . 33 Dual-Agent Nozzle . . . . . . . . . . . . . . . . . . . . . 33
Foam Aeration Tubes . . . . . . . . . . . . . . . . . . . . 34 Dry Chemical Nozzle . . . . . . . . . . . . . . . . . . . 33
Ball Shutoffs & Playpipes . . . . . . . . . . . . . . . . 35-36 Foam Aeration Tubes . . . . . . . . . . . . . . . . . . 34
Smooth Bore Tips . . . . . . . . . . . . . . . . . . . . . . . 37 Monitor Foam Aeration Tube . . . . . . . . . . . 56
Shutoff with Tips . . . . . . . . . . . . . . . . . . . . . . . . 38 Self-Educting Monitor Nozzles . . . . . . . . . . 54-56
Nozzle Accessories . . . . . . . . . . . . . . . . . . . . . . 39 In-Line Eductors . . . . . . . . . . . . . . . . . . . . . . . 79-80
Optional Nozzle Base & Teeth . . . . . . . . . . . . 40 Portable By-Pass Eductors . . . . . . . . . . . . . . 80
Pistol Grips & Handles . . . . . . . . . . . . . . . . . . 40
VALVES
SPECIALTY NOZZLES Forestry Wyes . . . . . . . . . . . . . . . . . . . . . . . . . 81
Wildland/Forestry Nozzles . . . . . . . . . . . . . . 41 Leader Line Wyes . . . . . . . . . . . . . . . . . . . . . . 81
Marine Nozzles . . . . . . . . . . . . . . . . . . . . . . . . . 42-43 Hydrant Wyes . . . . . . . . . . . . . . . . . . . . . . . . . . 81-82
Flashover Nozzle . . . . . . . . . . . . . . . . . . . . . . . . 44 Plain Wye . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Electric Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Water Thief . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Deicing Nozzle . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Suction Siamese . . . . . . . . . . . . . . . . . . . . . . . . 83
Piercing Applicators . . . . . . . . . . . . . . . . . . . . . 45 Clappered Valve Siamese . . . . . . . . . . . . . . . 83
Industrial Fog Nozzle . . . . . . . . . . . . . . . . . . . . 45 Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

MONITOR NOZZLES TECHNICAL DATA

Selectable Gallonage Monitor Nozzles . . . . 46-47 Service Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Adjustable Flow-Baffle Monitor Nozzles . . 48-50 Flow & Reach Data . . . . . . . . . . . . . . . . . . . . . 85-88
Automatic Monitor Nozzles . . . . . . . . . . . . . . 51 Compatibility Chart . . . . . . . . . . . . . . . . . . . . 89
Constant Gallonage Monitor Nozzles . . . . . 52 Eductor/Nozzle Performance Data . . . . . . 90
Electric Monitor Nozzles . . . . . . . . . . . . . . . . 53 Thread Information . . . . . . . . . . . . . . . . . . . . 91
Self-Educting Monitor Nozzles . . . . . . . . . . . 54-56 Metric Conversion . . . . . . . . . . . . . . . . . . . . . . 92
Monitor Nozzle Accessories . . . . . . . . . . . . . . 56 Style Number Index . . . . . . . . . . . . . . . . . . . . 93-94

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 1
HANDLINE NOZZLES SELECTABLE GALLONAGE NOZZLES

Protek’s Selectable Gallonage Nozzles are combination pattern nozzles with versatile multiple flow settings.
The unique stainless steel teeth produce a wide range of patterns from straight stream to full fog. Inlet size
is available in 1" (25mm), 1-1/2" (38mm) or 2-1/2" (65mm). Nozzles are available in either lightweight
hardcoat anodized aluminium or corrosion resistant brass construction. All nozzles are compatible
with Protek's foam aeration tubes. Nozzles are available in tip only configuration and shutoff/playpipe
combinations. All Protek nozzles are NFPA compliant.

Features:
• Superb wide fog pattern for optimum fire fighter protection
• Standard operating pressure at 100 psi (7bar), optional 85 psi (6 bar) or 75 psi (5 bar)
• Available in either lightweight hardcoat anodized aluminium or corrosion resistant brass construction
• Available in tip only and shutoff combinations
• Standard stainless steel spinning teeth or optional one-piece moulded fixed teeth
• Meets European standards
• Minimal maintenance reflected in robust design, precision machining and quality materials

FM PROTEK
Unique series number FM PROTEK
NFPA1964 Laser-etched anodized
APPROVED
COMPLIANT
etched for easy identi�ication APPROVED NFPA1964
label for excellent COMPLIANT

durability and visibility

New and improved
handle design
Raised lug for easier
pattern identi�ication
Reinforced metal pieces
improve durability
Flush without
changing pattern
or shutting down Stainless �ilter mesh
prevents blockage
caused by debris
Baf�le etched with
pressure (psi and bar)
Choice of 1", 1-1/2" or
2-1/2" swivel inlet

Style 366

Flow pattern detents

facilitate positive positioning
Stainless steel and smooth action
spinning teeth
Ergonomic design pistol grip Heavy-duty chrome plated
(available in various colours, see page 40) metal shutoff ball for
smooth action and long life

2 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SELECTABLE GALLONAGE NOZZLES

1” 360-Series Selectable Gallonage Nozzles

• 5-10-24-40 GPM (19-37-90-150 LPM)
• Optional 1-1/2” inlet size
• Flow setting at 100 psi (7 bar) operating pressure
• Can be used for high pressure applications up to 580 psi (40 bar)
• Compatible with Low and Medium Expansion Foam Tube
Style 210, 211 & 225 (see page 34)

360  1" Selectable Gallonage Nozzle with Pistol Grip Style 360 or 361
360-TO 1" Selectable Gallonage Nozzle Tip Only
• Twist shutoff optional
360-BA 1" Selectable Gallonage Breakapart Nozzle Style 360-TO or 361-TO
• Combination of Style 360-TO tip and Style 100 shutoff (see page 35)
360-BC 1" Selectable Gallonage Nozzle with Pistol Grip
• Brass construction
360-BCTO 1" Selectable Gallonage Nozzle Tip Only
• Brass construction

1" 361-Series Selectable Gallonage Nozzle

• 13-25-40-60 GPM (50-100-150-230 LPM) Style 360-BA
• Optional 1-1/2" inlet size
• Compatible with Low and Medium Expansion Foam Tube
Style 210 & 225 (see page 34)

361 1" Selectable Gallonage Nozzle with Pistol Grip Style 360-BC or 361-BC
361-TO 1" Selectable Gallonage Nozzle Tip Only
• Twist shutoff optional
361-BC 1" Selectable Gallonage Nozzle with Pistol Grip
• Brass construction
361-BCTO 1" Selectable Gallonage Nozzle Tip
FM Only PROTEK

• Brass construction APPROVED NFPA1964

COMPLIANT Style 360-BCTO or 361-BCTO
Inlet Weight Flow Settings
Style Length
Size Lbs(kg) GPM LPM
360 1” (25mm) 7.4” (190mm) 2.3 (1.1kg) 5-10-24-40 19-37-90-150
360-TO 1” (25mm) 5.5” (140mm) 1.6 (0.7kg) 5-10-24-40 19-37-90-150
360-BA 1” (25mm) 9.5” (242mm) 3.3 (1.5kg) 5-10-24-40 19-37-90-150
360-BC 1” (25mm) 7.4” (190mm) 5.3 (2.4kg) 5-10-24-40 19-37-90-150
360-BCTO 1” (25mm) 5.5” (140mm) 3.3 (1.5kg) 5-10-24-40 19-37-90-150
361 1” (25mm) 7.4” (190mm) 2.3 (1.1kg) 13-25-40-60 50-100-150-230
361-TO 1” (25mm) 5.5” (140mm) 1.6 (0.7kg) 13-25-40-60 50-100-150-230
361-BC 1” (25mm) 7.4” (190mm) 5.3 (2.4kg) 13-25-40-60 50-100-150-230
361-BCTO 1” (25mm) 5.5” (140mm) 3.3 (1.5kg) 13-25-40-60 50-100-150-230

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 3
HANDLINE NOZZLES SELECTABLE GALLONAGE NOZZLES

1" 362-Series Selectable Gallonage Nozzle

• 12-23-30 GPM (50-90-115 LPM)
• Optional 1-1/2" inlet size
• Compatible with Low and Medium Expansion Foam Tube
Style 210 & 225 (see page 34) Style 362
• Can be used for high pressure applications up to 580 psi (40 bar)
362 1" Selectable Gallonage Nozzle with Pistol Grip Style 362-TO
362-TO 1" Selectable Gallonage Nozzle Tip Only
• Twist shutoff optional
362-BC 1" Selectable Gallonage Nozzle with Pistol Grip
• Brass construction
362-BCTO 1" Selectable Gallonage Nozzle Tip Only Style 362-BC
• Brass construction Style 362-BCTO
Inlet Weight Flow Settings
Style Size Length Lbs(kg) GPM LPM
362 1” (25mm) 7.4” (190mm) 2.3 (1.1kg) 12-23-30 50-90-115
362-TO 1” (25mm) 5.5” (140mm) 1.6 (0.7kg) 12-23-30 50-90-115
362-BC 1” (25mm) 7.4” (190mm) 5.3 (2.4kg) 12-23-30 50-90-115
362-BCTO 1” (25mm) 5.5” (140mm) 3.3 (1.5kg) 12-23-30 50-90-115
1-1/2" 366-Series Selectable Gallonage Nozzles Style 366
•
30-60-95-125 GPM (115-230-360-475 LPM) PROTEK
FM
•
Optional 2-1/2” inlet size NFPA1964
APPROVED
•
100 psi (7 bar) standard, 75 psi (5 & 6 bar) optional COMPLIANT

•
Compatible with Low and Medium Expansion Foam Tube
Style 212, 213 & 226 (see page 34)
366 1-1/2" Selectable Gallonage Nozzle with Pistol Grip
366-TO 1-1/2" Selectable Gallonage Nozzle Tip Only
• Twist shutoff optional Style 366-BA
366-BA 1-1/2" Selectable Gallonage Breakapart Nozzle Style 366-TO
• Combination of Style 366-TO tip and Style 101 shutoff (see page 35)
366-BC 1-1/2" Selectable Gallonage Nozzle with Pistol Grip
• Brass construction
366-BCTO 1-1/2" Selectable Gallonage Nozzle with Pistol Grip
Style 366-BC
• Brass construction
Inlet Weight Flow Settings
Style Length
Size Lbs(kg) GPM LPM
366 1-1/2" (38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125 115-230-360-475
366-TO 1-1/2" (38mm) 6.3" (160mm) 2.2 (1kg) 30-60-95-125 115-230-360-475
366-BA 1-1/2" (38mm) 12.4" (315mm) 4.4 (2kg) 30-60-95-125 115-230-360-475
366-BC 1-1/2" (38mm) 9" (228mm) 8.3 (3.7kg) 30-60-95-125 115-230-360-475
366-BCTO 1-1/2" (38mm) 6.3" (160mm) 5.5 (2.5kg) 30-60-95-125 115-230-360-475

4 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SELECTABLE GALLONAGE NOZZLES

366-BI Selectable Gallonage Nozzle with Integrated 2-1/2" Inst. Male

• BIM inlet
366-K 1-1/2” Selectable Gallonage Nozzle
• Dual fixed and spinning teeth enhance quality and efficiency of fog pattern
366-L 1-1/2” Selectable Gallonage Nozzle
• Special fluorescent bumper enables night vision search

Style 366-BI Style 366-K Style 366-L

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
366-BI 2-1/2" (65mm) 12.6" (320mm) 4.4 (2kg) 30-60-95-125 115-230-360-475
366-K 1-1/2"(38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125 115-230-360-475
366-L 1-1/2"(38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125 115-230-360-475

Mid-Range 367-Series Selectable Gallonage Nozzles

• 95-125-150-200 GPM (360-475-550-750 LPM)
• Optional 2-1/2” inlet size
• 100 psi (7 bar) standard, 75 psi (5 bar) optional
FM PROTEK
• Compatible with Low and Medium Expansion Foam Tube NFPA1964
Style 367 APPROVED
Style 214, 215 & 226 (see page 34) COMPLIANT

367 Mid-Range Selectable Gallonage Nozzle with Pistol Grip

367-TO Mid-Range Selectable Gallonage Nozzle Tip Only
367-BA     Mid-Range Selectable Gallonage Breakapart Nozzle
• Combination of Style 367-TO tip and Style 102 shutoff (see page 35)
367-BC Mid-Range Selectable Gallonage Nozzle with Pistol Grip Style 367-BC
• Brass construction
367-BI Mid-Range Selectable Gallonage Nozzle with Integrated 2-1/2" Inst. Male
• BIM inlet

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
367 1-1/2" (38mm) 10.2" (260mm) 5.7 (2.6kg) 95-125-150-200 360-475-550-750
367-TO 1-1/2" (38mm) 7.1" (180mm) 3.3 (1.5kg) 95-125-150-200 360-475-550-750
367-BA 1-1/2" (38mm) 13.1" (332mm) 6.3 (2.9kg) 95-125-150-200 360-475-550-750
367-BC 1-1/2" (38mm) 10.2" (260mm) 12.7 (5.8kg) 95-125-150-200 360-475-550-750
367-BCTO 1-1/2" (38mm) 7.1" (180mm) 8.6 (3.9kg) 95-125-150-200 360-475-550-750
367-BI 2-1/2" (65mm) 13.8" (350mm) 6.3 (2.9kg) 95-125-150-200 360-475-550-750

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 5
HANDLINE NOZZLES SELECTABLE GALLONAGE NOZZLES

Wide-Range 369-Series Selectable Gallonage Nozzles

• 30-60-95-125-150-200 GPM (115-230-360-475-550-750 LPM)
• 100 psi (7 bar) standard, 75 psi (5 bar) optional
• Compatible with Low and Medium Expansion Foam Tube
Style 214, 215 & 227 (see page 34)
Style 369
369 Wide-Range Selectable Gallonage Nozzle with Pistol Grip

369-TO Wide-Range Selectable Gallonage Nozzle Tip Only FM PROTEK

APPROVED NFPA1964
369-BA     Wide-Range Selectable Gallonage Breakapart Nozzle COMPLIANT

• Combination of Style 369-TO tip and Style 102 shutoff (see page 35)

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
369 1-1/2" (38mm) 10.2" (260mm) 5.7 (2.6kg) 30-60-95-125-150-200 115-230-360-475-550-750
369-TO 1-1/2" (38mm) 7" (178mm) 3.3 (1.5kg) 30-60-95-125-150-200 115-230-360-475-550-750
369-BA 1-1/2" (38mm) 13" (330mm) 6.2 (2.8kg) 30-60-95-125-150-200 115-230-360-475-550-750

High-Range 368-Series Selectable Gallonage Nozzles FM PROTEK

APPROVED NFPA1964
• 95-125-150-200-250 GPM (360-475-550-750-950 LPM) COMPLIANT

• 100 psi (7 bar) standard, 75 psi (5 bar) optional

• Compatible with Low and Medium Expansion Foam Tube
Style 214, 215 & 227 (see page 34)
Style 368-TO Style 368
368 High-Range Selectable Gallonage Nozzle with Pistol Grip

368-TO   High-Range Selectable Gallonage Nozzle Tip Only

368-BA High-Range Selectable Gallonage Breakapart Nozzle

• Combination of Style 368-TO tip and Style 102 shutoff (see page 35)

368-BC High-Range Selectable Gallonage Nozzle with Pistol Grip

• Brass construction
Style 368-BA
368-BCTO High-Range Selectable Gallonage Nozzle Tip Only
Style 368-BC
• Brass construction

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
368 2-1/2" (65mm) 11" (280mm) 6.3 (2.8kg) 95-125-150-200-250 360-475-550-750-950
368-TO 1-1/2" (38mm) 7.1" (180mm) 3.2 (1.5kg) 95-125-150-200-250 360-475-550-750-950
368-BA 2-1/2" (65mm) 13" (330mm) 6.3 (2.8kg) 95-125-150-200-250 360-475-550-750-950
368-BC 2-1/2" (65mm) 11" (280mm) 14.7 (6.7kg) 95-125-150-200-250 360-475-550-750-950
368-BCTO 1-1/2" (38mm) 7.1" (180mm) 9.9 (4.5kg) 95-125-150-200-250 360-475-550-750-950

6 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SELECTABLE GALLONAGE NOZZLES

368-BI High-Range Selectable Gallonage Nozzle with Integrated 2-1/2" Inst. Male Style 368-TP
• BIM inlet

368-TP High-Range Selectable Gallonage Nozzle Tip with Playpipe

• Combination of Style 368-TO tip and Style 130 playpipe (see page 36)

368-BCTP High-Range Selectable Gallonage Nozzle Tip with Playpipe

• Brass construction Style 368-BCTP
• Combination of Style 368-BCTO tip and Style 130-BC playpipe (see page 36)

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
368-BI 2-1/2" (65mm) 9.9" (250mm) 6.4 (2.9kg) 95-125-150-200-250 360-475-550-750-950
368-TP 1-1/2" (38mm) 11.8" (300mm) 9.5 (4.3kg) 95-125-150-200-250 360-475-550-750-950
368-BCTP 2-1/2" (65mm) 11.8" (300mm) 21 (9.5kg) 95-125-150-200-250 360-475-550-750-950

High-Range 390-Series Selectable Gallonage Nozzle

• 160-200-240-280-320 GPM (600-750-900-1050-1200 LPM)
• 100 psi (7 bar) standard, 75 psi (5 bar) optional
• Compatible with Foam Tube Style 220 (see page 34)
Style 390
390 High-Range Selectable Gallonage Nozzle with Pistol Grip

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
390 2-1/2" (65mm) 11" (280mm) 5.5 (2.5kg) 160-200-240-280-320 600-750-900-1050-1200

396-Series Selectable Gallonage Nozzle with Trigger shutoff

• 30-60-95-125 GPM (115-230-360-475 LPM)
• Flow setting at 100 psi (7 bar) operating pressure
• Customised flow settings available on request
• Adjust flow by turning the flow selection ring
• Trigger shutoff automatically shuts off flows when released

396 High-Range Selectable Gallonage Nozzle with Pistol Grip Style 396

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
396 1-1/2" (38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125 115-230-360-475

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 7
HANDLINE NOZZLES EN SELECTABLE GALLONAGE NOZZLES

Protek’s EN Selectable Gallonage Nozzles are combination pattern nozzles with multiple flow settings at
lower operating pressure. The nozzles are designed to meet EN 15182-2 Type 3 and DIN 14367 compliance
requirements. Inlet size is available in 1” (25mm), 1-1/2” (38mm) or 2-1/2” (65mm). Nozzles are available
in lightweight hardcoat anodized aluminium construction. All nozzles are compatible with Protek’s foam
aeration tubes.

Features:
• EN 15182-2 Type 3 and DIN 14367 compliant
• Combination pattern nozzle with multiple flow settings for operator flow control
• Easy to operate with a-quarter turn from straight stream to fog
• One-click turn of the moulded bumper ring to flashover pattern position
• Raised lug on the bumper for flashover fog pattern
• Maximum flow position touch button on the flow selection control ring
• Exceptionally lightweight and compact

Unique series number

Laser-etched anodized
etched for easy identi�ication
label for excellent
durability and visibility
New and improved
Flow pattern detents facilitate handle design
positive positioning and smooth
action
Reinforced metal pieces
Flush without
improve durability
changing pattern
or shutting down

Stainless �ilter mesh

Baf�le etched with prevents blockage
pressure (psi and bar) caused by debris

Choice of 1" or 1-1/2"

Style 2361

Raised lug for easier pattern

Stainless steel identi�ication with 120 � 120
spinning teeth turn from jet to fog

Ergonomic design pistol grip Heavy-duty chrome plated

(available in various colours, see page 40) metal shutoff ball for
smooth action and long life

8 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
EN SELECTABLE GALLONAGE NOZZLES

EN Selectable Gallonage Nozzles

2360 1" EN Selectable Gallonage Nozzle with Pistol Grip

• 20-40-100-150 LPM at 6 bar
• Compatible with Low and Medium Expansion Foam Tube
Style 210 & 225 (see page 34)
• Can be used for high pressure applications up to 580 psi (40 bar)
Style 2360 or 2361
2361     1" EN Selectable Gallonage Nozzle with Pistol Grip
• 50-100-150-230 LPM at 6 bar
• Compatible with Low and Medium Expansion Foam TubeStyle 210 & 225 (see page 34)

2365 1.5" EN Selectable Gallonage Nozzle with Pistol Grip

• 70-130-230-400 LPM at 6 bar
• Compatible with Low and Medium Expansion Foam Tube
Style 213 & 226 (see page 34)

2366 1.5" EN Selectable Gallonage Nozzle with Pistol Grip Style 2365 or 2366
• 100-250-350-500 LPM at 6 bar
• Compatible with Low and Medium Expansion Foam TubeStyle 213 & 226 (see page34)

2368 2.5" EN Selectable Gallonage Nozzle with Pistol Grip

• 285-500-600-800-950 LPM at 6 bar
• Compatible with Foam Tube Style 220 (see page 34)

2368-TP 2.5" EN Selectable Gallonage Nozzle Tip with Playpipe Style 2368
• 285-500-600-800-950 LPM at 6 bar
• Compatible with Foam Tube Style 220 (see page 34)

Style 2368-TP

Inlet Flow Settings

Style Length Weight
Size LPM Pressure
2360 1" BSP F 19 cm 1.2 kg 20-40-100-150 6 bar
2361 1" BSP F 19 cm 1.2 kg 50-100-150-230 6 bar
2365 1.5" BSP F 21.5 cm 1.6 kg 70-130-230-400 6 bar
1.5" BSP F
2366 22.8 cm 1.6 kg 100-250-350-500 6 bar
BS 336 Inst.
2.5" BSP F
2368 27.9 cm 2.5 kg 285-500-600-800-950 6 bar
BS 336 Inst.
2.5" BSP F
2368-TP 43.1 cm 4.2 kg 285-500-600-800-950 6 bar
BS 336 Inst.

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 9
HANDLINE NOZZLES MULTI-MODE NOZZLES

Protek’s new-generation Multi-Mode Nozzle is a dynamic nozzle with combined pulsing, selectable,
automatic and low-pressure modes. These versatile nozzles combine controlled stream quality, reduced
pressure on fire fighters and pump, optimum flow rate at regulated pressure and maximum selectable
flows. Change in the flow pattern can readily be achieved via an efficient 120˚ turn of the moulded bumper.
Enhanced positivity of the flow selection ring and ball-valve shut off delivers optimal stream performance
and effective operating control slide-valve design reduces turbulence and controls flow rate whilst
preserving quality stream. Inlet size is available in 1” (25mm), 1-1/2” (38mm) or 2-1/2” (65mm). All Protek
nozzles are NFPA compliant.

Features:
• Combination pattern nozzle with combined pulsing, selectable, automatic and low pressure modes
• Slide-valve design reduces turbulence and controls flow rate whilst preserving quality stream
• Efficient 120˚ turn of the moulded bumper from jet stream to fog pattern
• Shock absorber in the bumper for greater resilience
• Improved positivity of flow selection ring ensures optimal stream performance
• Large index ring with indicator allows easy flow, pressure or flush selections with a gloved hand
• Optimal straight stream and fog pattern performance are achieved at the selected flow setting

Laser-etched anodized
label for excellent Durable handle design for quick
durability and visibility open / close operation
Enhanced positivity of
�low selection ring

Flow pattern detents

facilitate positive positioning
and smooth action

Stainless �ilter mesh

prevents blockage
caused by debris

Optional �ixed moulded teeth or

stainless steel spinning teeth Reinforced metal piece
Slide valve design improves durability
minimises turbulence

Raised lug for easier pattern Style 326

identi�ication with 120 � 120
turn from jet to fog
Eronomic design pistol grip
(available in various colours, see page 40)

10 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
MULTI-MODE NOZZLES

1-1/2” 325 Multi-Mode Nozzle

• Pulsing 30 GPM @ 100 psi (115 LPM @ 7 bar), automatic 60 GPM @ 90 psi (230 LPM @ 6.5 bar)
and low pressure 80 GPM @ 85 psi (300 LPM @ 6 bar)
• Compatible with Foam Tube Style 208 (see page 34)
• Optional stainless steel spinning teeth

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
PULSING 30 GPM @ 100 psi PULSING 115 LPM @ 7 bar
1-1/2" 9.7" 3
325 AUTOMATIC 60 GPM @ 90 psi AUTOMATIC 230 LPM @ 6.5 bar
(38mm) (247mm) (1.4kg)
LOW PRESSURE 80 GPM @ 85 psi LOW PRESSURE 300 LPM @ 6 bar

FM PROTEK
NFPA1964
Style 325 APPROVED
COMPLIANT Style 326

1-1/2” 326 Multi-Mode Nozzle

• Pulsing 80 GPM @ 100 psi (300 LPM @ 7 bar), automatic 130 GPM @ 85 psi (500 LPM @ 6 bar)
and low pressure 170 GPM @ 75 psi (635 LPM @ 5 bar)
• Compatible with Foam Tube Style 209 (see page 34)
• Optional stainless steel spinning teeth

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) LPM Pressure
PULSING 80 GPM @ 100 psi PULSING 300 LPM @ 7 bar
1-1/2" 11.2" 5.4 AUTOMATIC 130 GPM @ 85 psi AUTOMATIC 500 LPM @ 6 bar
326
(38mm) (284mm) (2.5kg)
LOW PRESSURE 170 GPM @ 75 psi LOW PRESSURE 625 LPM @ 5 bar

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 11
HANDLINE NOZZLES MULTI-PURPOSE NOZZLES

Protek’s Multi-Purpose Nozzles are technologically advanced nozzles with synchronised solid bore and
fog stream capability. The nozzle offers the flexibility to flow both at the same time or independently.
Solid bore provides excellent reach and penetration at low pressure, whilst fog stream offers protection
and rapid cooling. Inlet size is available in either 1-1/2" (38mm) or 2-1/2" (65mm). Nozzles are capable
of operating efficiently at pressures as low as 50 psi to reduce fire fighter fatigue or up to 100 psi for
maximum flow. All Protek nozzles are NFPA compliant.

Features:
• Operates effectively from 50 psi (3.5 bar) to 100 psi (7 bar)
• Exceptionally lightweight and compact
• Suitable for use with CAFS systems
• Conforms to all aspects of NFPA 1964 (Spray, Nozzles, Shutoff and Tips)

FM PROTEK
APPROVED NFPA1964
COMPLIANT
Laser-etched anodized
label for excellent
Flush without durability and visibility Handle shutoff for
changing pattern solid stream control
or shutting down
Adjustable fog stream
Unique series number
with pattern detents Reinforced metal pieces
etched for easy identification
improve durability

Optional solid bore tip size: Stainless filter mesh

3/8", 1/2", 5/8"(For Style 332), prevents blockage
3/4", 7/8", 15/16" or 1" caused by debris

Twist shutoff for Choice of 1-1/2" or

fog stream control 2-1/2" swivel inlet

Style 333

Stainless steel
spinning teeth
Heavy-duty chrome plated
metal shutoff ball for
Change from solid Ergonomic design pistol grip smooth action and long life
stream to fog stream (available in various colours, see page 40)
without shutting down

12 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
MULTI-PURPOSE NOZZLES

Style 332 Flow Chart

Tip Inlet Solid Bore Fog Flow Combination
332-Series Multi-Purpose Nozzle Size Pressure(PSI) Flow(GPM) (GPM) Flow(GPM)
50 23 42 66
332 1-1/2" Multi-Purpose Nozzle with Pistol Grip 3/8" 75 30 50 75
• Optional solid bore tip size of 3/8", 1/2" or 5/8" 100 36 60 95
• Operating pressure up to 100 psi 50 45 42 86
1/2" 75 60 50 110
• Compatible with Foam Tube Style 212(see page34) 100 66 60 120
50 75 42 105
5/8" 75 95 50 135
100 100 60 155

Style 332

FOG SOLID BORE COMBINATION STREAMS

333-Series Multi-Purpose Nozzle
FM PROTEK
333 1-1/2" or 2-1/2" Multi-Purpose Nozzle with Pistol Grip NFPA1964
APPROVED
• Optional solid bore tip size of 3/4", 7/8", 15/16" or 1" COMPLIANT

• Operating pressure up to 100 psi

• Compatible with Foam Tube Style 214 (see page 34) Style 333 Flow Chart
Tip Inlet Solid Bore Fog Flow Combination
Size Pressure(PSI) Flow(GPM) (GPM) Flow(GPM)
50 115 95 199
3/4" 75 140 115 245
100 160 135 285
50 155 95 232
7/8" 75 195 115 295
100 220 135 340
50 180 95 250
15/16" 75 195 115 300
100 250 135 365
Style 333 50 205 95 270
1" 75 240 115 340
100 285 135 385
Inlet Weight Fog at 100PSI
Style Length Tip Options
Size Lbs(kg) GPM LPM
332 1-1/2" (38mm) 8.6" (218mm) 3.5 (1.6kg) 3/8", 1/2", 5/8" 60 230
333 1-1/2" or 2-1/2" 11" (280mm) 5.8 (2.6kg) 3/4", 7/8", 15/16", 1" 135 510

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 13
HANDLINE NOZZLES AUTOMATIC NOZZLES

Protek’s Automatic Nozzles by design adjust to fluctuating water flow to maintain effective pressure
and a consistent stream in all flow ranges. Nozzles are adjustable from straight stream to fog pattern.
Nozzles flush easily without shutting down and provide a constant flow in either fog or straight stream.
Inlet size is available in 1" (25mm), 1-1/2" (38mm) or 2-1/2" (65mm). All nozzles are compatible with
Protek’s foam aeration tubes. Nozzles are available in ball/slide valve configurations and shutoff/playpipe
combinations. All Protek nozzles are NFPA compliant.

Features:
• Extensive range of flow settings
• Exceptionally lightweight and compact
• Minimal maintenance reflected in robust design, precision machining and quality materials
• Conforms to all aspects of NFPA 1964 (Spray, Nozzles, Shutoff and Tips)
Slide Valve Control Ball Valve Control
FM PROTEK available in Style available in Style
APPROVED NFPA1964 321, 322 ,323, 324 310, 311, 312, 314
COMPLIANT

Laser-etched anodized
label for excellent
durability and visibility
Flow-rate control handle
Optional fixed moulded with multiple flows and
teeth or stainless steel closure (slide valve control)
spinning teeth
Choice of either ball
valve control or slide
valve control

Stainless filter mesh

Optional dual pressure prevents blockage
settings via adjustment caused by debris
of the baffle
Style 323-DP Choice of 1", 1-1/2" or
2-1/2" swivel inlet
Change from solid to
fog stream without
shutting down
Flow pattern detents
facilitate positive
positioning
and smooth action Spray angle lock Ergonomic design pistol grip
option available (available in various colours, see page 40)
in Style 322-SP

14 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
AUTOMATIC NOZZLES

1" and 1-1/2" Ball-Valve Automatic Nozzles

FM PROTEK
310 1" Automatic Nozzle with Pistol Grip
APPROVED NFPA1964
COMPLIANT
• 10-75 GPM (40-285 LPM)
• Ball valve control Style 310
• Spinning teeth
• Compatible with Foam Tube Style 212 (see page 34)

311    1-1/2" Automatic Nozzle with Pistol Grip

• 60-125 GPM (230-475 LPM)
• Ball valve control
• Spinning teeth
• Compatible with Foam Tube Style 212 (see page 34)
Style 311

1-1/2" Ball-Valve Automatic Nozzle

312 1-1/2" Automatic Nozzle with Pistol Grip

• 60-200 GPM (230-750 LPM)
• Ball valve control Style 312
• Spinning teeth
• Compatible with Foam Tube Style 214 (see page 34)

2-1/2" Ball-Valve Automatic Nozzles

• 75-350 GPM (280-1325 LPM)
• Ball valve control
Style 314
• Spinning teeth
• Compatible with Foam Tube Style 217 (see page 34)

314 2-1/2" Automatic Nozzle with Pistol Grip

314-TP 2-1/2" Automatic Nozzle with Playpipe Style 314-TP

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
310 1" (25mm) 9.1" (229mm) 3.7 (1.7kg) 10-75 40-285
311 1-1/2" (38mm) 9.2" (234mm) 3.7 (1.7kg) 60-125 230-475
312 1-1/2" (38mm) 10.6" (269mm) 5.6 (2.5kg) 60-200 230-750
314 2-1/2" (65mm) 12.2" (309mm) 8.0 (3.6kg) 75-350 280-1325
314-TP 2-1/2" (65mm) 17.1" (435mm) 9.9 (4.5kg) 75-350 280-1325

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 15
HANDLINE NOZZLES AUTOMATIC NOZZLES

1" and 1-1/2" Slide-Valve Automatic Nozzles

• 10-125 GPM (40-475 LPM)
• Slide valve control
• Fixed teeth
• Compatible with Foam Tube Style 216 (see page 34)

321 1" Automatic Nozzle with Pistol Grip

Style 321
322     1-1/2" Automatic Nozzle with Pistol Grip

322-SP 1-1/2" Automatic Nozzle with Pistol Grip

• Lockage spray angle of 40˚ that can be reset to 110˚

Style 322
FM PROTEK
APPROVED NFPA1964
COMPLIANT

Lockable spray
angle of 40˚
which can be
Style 322-SP reset to 110˚

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
321 1" (25mm) 8.6" (220mm) 3.1 (1.4kg) 10-125 40-475

322 1-1/2" (38mm) 9.0" (230mm) 3.2 (1.4kg) 10-125 40-475

322-SP 1-1/2" (38mm) 9.0" (230mm) 3.2 (1.4kg) 10-125 40-475

16 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
AUTOMATIC NOZZLES

Style 323
1-1/2" Slide-Valve Automatic Nozzles
• 70-200 GPM (265-750 LPM)
• Slide valve control
Style 323-DP
• Fixed teeth
• Compatible with Foam Tube Style 218 (see page 34)

323 1-1/2" Automatic Nozzle with Pistol Grip

323-DP   1-1/2" Dual Pressure Nozzle with Pistol Grip

  • Dual pressure setting offers the unique ability to change operating nozzle pressure
  • Pressure mode is interchangeable between rated pressure and low pressure, such
  as 100 psi and 75 psi
  • Switch between pressure modes via an easy twist of the knob on the end of the baffle
  • High operating pressure provides the ability to aggressively conduct a hard-hitting fire attack
  • Low operating pressure reduces the reaction torque at initial discharge
  • Conforms to all aspects of NFPA 1964 (Spray, Nozzles, Shutoff and Tips)

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
323 1-1/2" (38mm) 11" (280mm) 5.1 (2.3kg) 70-200 265-750
323-DP 1-1/2" (38mm) 11" (280mm) 5.1 (2.3kg) 70-200 265-750

2-1/2" Slide-Control Automatic Nozzles

• 50-350 GPM (190-1325 LPM) PROTEK
FM
• Slide valve control APPROVED NFPA1964
COMPLIANT

• Fixed teeth
• Compatible with Foam Tube Style 219 (see page 34) Style 324
324 2-1/2" Automatic Nozzle with Pistol Grip

324-TP 2-1/2" Automatic Nozzle with Playpipe

Style 324-TP

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
324 2-1/2" (65mm) 12.6" (320mm) 7.5 (3.4kg) 50-350 190-1325
324-TP 2-1/2" (65mm) 15" (381mm) 10.6 (4.8kg) 50-350 190-1325

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 17
HANDLINE NOZZLES CONSTANT GALLONAGE NOZZLES

Protek’s Constant Gallonage Nozzles effectively deliver a constant gallonage from straight stream to full fog.
The nozzle combines quality stream performance at various pressures with the simplicity of a fixed orifice.
Nozzles are affordably priced, easy to use and reliable in tough situations. Inlet size is available in 1" (25mm),
1-1/2" (38mm) or 2-1/2" (65mm). Nozzles are available in either lightweight hardcoat anodized aluminium
or corrosion resistant brass construction. All nozzles are compatible with Protek’s foam aeration tubes.
Nozzles are available in shutoff/playpipe combinations. All Protek nozzles are NFPA compliant.

Features:
• Constant single-flow nozzle delivered with a calibrated flow disc installed
• Superb wide fog pattern for optimum fire fighter protection
• Excellent performance at pressure as low as 50 psi (3.5 bar)
• Standard operating pressure at 100 psi (7bar), optional 85 psi (6 bar) or 75 psi (5 bar)
• Available in either lightweight hardcoat anodized aluminium or corrosion resistant brass construction
• Available in tip only and shutoff combinations
• Minimal maintenance reflected in robust design, precision machining and quality materials
• Custom flow and pressure combinations are available on request
FM PROTEK
FM PROTEK
NFPA1964
APPROVED
APPROVED NFPA1964
COMPLIANT

Flow pattern detents COMPLIANT

facilitate positive positioning Laser-etched anodized

and smooth action label for excellent
durability and visibility
Unique series number
Fixed moulded teeth for easy identification
or stainless steel New and improved
spinning teeth handle design

Stainless filter mesh

prevents blockage
Constant flow regardless caused by debris
of pattern change

Choice of 1", 1-1/2" or

2-1/2" swivel inlet
Custom flow and pressure
combinations are available with
flow rate etched on the baffle on Style 372-BC
request

Heavy-duty chrome plated

Ergonomic design pistol grip metal shutoff ball for
(available in various colours, see page 40) smooth action and long life

18 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
CONSTANT GALLONAGE NOZZLES

1" 371-Series Constant Gallonage Nozzle

371, 371-BC 1" Constant Gallonage Nozzle with Pistol Grip
    • 13, 25, 40 or 60 GPM (50, 100, 150 or 230 LPM)
  • Optional 1-1/2” inlet size
  • 100 psi (7 bar) standard, 85 psi (6 bar) optional
  • Compatible with Foam Tube Style 211 (see page 34)

371-TO 1" Constant Gallonage Nozzle Tip Only Style 371

371-BCTO 1" Constant Gallonage Nozzle Tip Only
    • Brass construction
Inlet Weight Flow Settings
Style Length
Size Lbs(kg) GPM LPM
371 1" (25mm) 7.1" (180mm) 2.1 (0.9kg) 13, 25, 40 or 60 50, 100, 150 or 230
371-BC 1" (25mm) 7.1" (180mm) 5.3 (2.4kg) 13, 25, 40 or 60 50, 100, 150 or 230

1-1/2" 372-Series Constant Gallonage Nozzles

  • 60, 95 or 125 GPM (230, 360 or 475 LPM)
  • Optional 2-1/2” inlet size
  • Flow setting at 100 psi (7 bar) operating pressure
  • Compatible with Foam Tube Style 212 (see page 34)

372 1-1/2" Constant Gallonage Nozzle with Pistol Grip

Style 372
372-TO 1-1/2" Constant Gallonage Nozzle Tip Only
372-BA 1-1/2" Constant Gallonage Breakapart Nozzle
• Combination of Style 372-TO tip and Style 101 shutoff (see page 35)
372-BC   1-1/2" Constant Gallonage Nozzle with Pistol Grip
• Industrial nozzle
• Brass construction
372-BCTO   1-1/2" Constant Gallonage Nozzle Tip Only PROTEK
FM
• Brass construction StyleNFPA1964
372-BC
APPROVED
COMPLIANT

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
372 1-1/2" (38mm) 8.5" (216mm) 3.6 (1.6kg) 60, 95 or 125 230, 360 or 475
372-TO 1-1/2" (38mm) 5.9" (150mm) 1.9 (0.8kg) 60, 95 or 125 230, 360 or 475
372-BA 1-1/2" (38mm) 12" (305mm) 4.2 (1.9kg) 60, 95 or 125 230, 360 or 475
372-BC 1-1/2" (38mm) 8.5" (216mm) 7.5 (3.4kg) 60, 95 or 125 230, 360 or 475
372-BCTO 1-1/2" (38mm) 5.9" (150mm) 5.1 (2.3kg) 60, 95 or 125 230, 360 or 475

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 19
HANDLINE NOZZLES CONSTANT GALLONAGE NOZZLES

1-1/2" 373-Series Constant Gallonage Nozzles

• 150, 175 or 200 GPM (550, 660 or 750 LPM)
• Flow setting at 100 psi (7 bar) operating pressure
• Compatible with Foam Tube Style 214 (see page 34)

373     1-1/2" Constant Gallonage Nozzle with Pistol Grip Style 373

373-TO     1-1/2" Constant Gallonage Nozzle Tip Only

373-BA  1-1/2" Constant Gallonage Breakapart Nozzle

• Combination of Style 373-TO tip and Style 102 shutoff (see page 35)

373-BC  1-1/2" Constant Gallonage Nozzle with Pistol Grip

• Industrial nozzle
• Brass construction Style 373-BC

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
373 1-1/2" (38mm) 10.2" (259mm) 5.7 (2.6kg) 150, 175 or 200 550, 660 or 750
373-TO 1-1/2" (38mm) 7.4" (188mm) 3.3 (1.5kg) 150, 175 or 200 550, 660 or 750
373-BA 1-1/2" (38mm) 12.8" (325mm) 6.4 (2.9kg) 150, 175 or 200 550, 660 or 750
373-BC 1-1/2" (38mm) 9.8" (249mm) 12.7 (5.8kg) 150, 175 or 200 550, 660 or 750

Mid-Range 374-Series Constant Gallonage Nozzles

• 150, 175, 200 or 250 GPM (550, 660, 750 or 950 LPM)
• Flow setting at 100 psi (7 bar) operating pressure
• Compatible with Foam Tube Style 214 (see page 34)
Style 374
374   Mid-Range Constant Gallonage Nozzle with Pistol Grip

374-BC  Mid-Range Constant Gallonage Nozzle with Pistol Grip

• Industrial nozzle
• Brass construction
FM PROTEK
APPROVED NFPA1964
COMPLIANT
Style 374-BC

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
374 2-1/2" (65mm) 11" (279mm) 6.2 (2.8kg) 150, 175, 200 or 250 550, 660, 750 or 950
374-BC 2-1/2" (65mm) 11" (279mm) 14.7 (6.7kg) 150, 175, 200 or 250 550, 660, 750 or 950

20 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
CONSTANT GALLONAGE NOZZLES

Mid-Range 374-Series Constant Gallonage Nozzles

374-TP    Mid-Range Constant Gallonage Nozzle with Playpipe

374-BCTP Mid-Range Constant Gallonage Nozzle with Playpipe

• Industrial nozzle
• Brass construction

FM PROTEK
APPROVED NFPA1964
COMPLIANT

Style 374-TP Style 374-BCTP

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
374-TP 2-1/2" (65mm) 16.7" (424mm) 9.5 (4.3kg) 150, 175, 200 or 250 550, 660, 750 or 950
374-BCTP 2-1/2" (65mm) 17" (432mm) 21 (9.5kg) 150, 175, 200 or 250 550, 660, 750 or 950

High-Range 375-Series Constant Gallonage Nozzle

375   High-Range Constant Gallonage Nozzle with Pistol Grip

• 200, 250, 300 or 350 GPM (750, 950, 1140 or 1325 LPM)
• Flow setting at 100 psi (7 bar) operating pressure
Style 375
• Compatible with Foam Tube Style 217 (see page 34)

375-TO High-Range Constant Gallonage Nozzle Tip Only

• Varying flow settings with an easy turn of the baffle
• Flow rates are etched on the baffle
• Optional 1-1/2" or 2-1/2" inlet size
• Can be used as an attachment to Protek monitors
Style 611, 600-1 and 600-2 Style 375-TO 1.5" inlet 2.5" inlet
Inlet Weight Flow Settings
Style Length
Size Lbs(kg) GPM LPM
375 2-1/2" (65mm) 11.8" (300mm) 7.5 (3.4kg) 200, 250, 300 or 350 750, 950, 1140 or 1325
1-1/2" (38mm) 8.8" (223mm) 5.1 (2.3kg)
375-TO 200, 250, 300 or 350 750, 950, 1140 or 1325
2-1/2" (65mm) 9.5" (240mm) 5.7 (2.6kg)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 21
HANDLINE NOZZLES LOW PRESSURE NOZZLES

Protek’s Low Pressure Nozzles are designed to produce versatile flow rates with combination pattern at
low operating pressures. These nozzles effectively minimise pressure on pumps and fire fighter fatigue
whilst delivering more water. Change in the flow pattern can readily be achieved via an efficient 120˚ turn of
the moulded bumper. Enhanced positivity of the flow selection ring and ball-valve shut off deliver optimal
stream performance and effective operating control. Inlet size is available in 1” (25mm), 1-1/2” (38mm) or
2-1/2” (65mm). All Protek nozzles are NFPA compliant.

Features:
• Versatile five multiple flow rate settings, up to 200 GPM (750 LPM) at 5 bar (75 psi)
• Effectively minimises pressure on pumps and fire fighter fatigue whilst delivering more water
• Shock absorber in the bumper for greater resilience
• Efficient 120˚ turn of the moulded bumper from jet stream to fog pattern
• Enhanced positivity of the flow selection ring and ball-valve shut off

label for excellent

Laser-etched anodized New and improved
durability and visibility handle design
Unique serial number
etched for easy identi�ication
Versatile �low settings at low
working pressure minimise Reinforced metal pieces
operator fatigue and pressure improve durability
on pumps

Flush without Choice of 1-1/2”NH inlet

changing pattern or 2-1/2” BIM inlet
or shutting down
Stainless �ilter mesh
prevents blockage
caused by debris
Style 366-F
Flow pattern detents
facilitate positive positioning
and smooth action
Eronomic design pistol grip
(available in various colours, see page 40)

FM PROTEK Raised lug for �lashover fog pattern with

APPROVED NFPA1964 quick 120˚
120 �turn of the moulded bumper
COMPLIANT

from jet stream to fog pattern

Available in stainless steel spinning teeth

22 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
LOW PRESSURE NOZZLES

361-F 1” Low-Pressure Selectable Gallonage Nozzle

• 13-25-40-60 GPM (50-100-150-230 LPM) @ 5 bar (75 psi)
• Exceptionally lightweight and compact
• Optional stainless steel spinning teeth
• Compatible with Low and Medium Expansion Foam Tube
Style 361-F
Style 210 & 225 (see page 34)

366-F 1-1/2” Low-Pressure Selectable Gallonage Nozzle

• 30-60-95-125-150 GPM (115-230-360-475-570 LPM) at 5 bar (75 psi)
• Exceptionally lightweight and compact
• Optional stainless steel spinning teeth Style 366-F
• Compatible with Low and Medium Expansion Foam Tube
Style 213 & 226 (see page 34)

372-F 1-1/2” Low-Pressure Constant Gallonage Nozzle

• 60, 95, 125 or 150 GPM (230, 360, 470 OR 570 LPM) @ 5 bar (75 psi)
• Exceptionally lightweight and compact
• Optional stainless steel spinning teeth
• Compatible with Low and Medium Expansion Foam Tube Style 372-F
Style 213 & 226 (see page 34)
Inlet Weight Flow Settings @ 5 bar (75 psi)
Style Length
Size Lbs(kg) GPM LPM
361-F 1" (25mm) 7.3" (186mm) 2.3 (1.1kg) 13-25-40-60 50-100-150-230
366-F 1-1/2" (38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125-150 115-230-360-475-570
372-F 1-1/2" (38mm) 8.5" (216mm) 3.5 (1.6kg) 60, 95, 125 or 150 230, 360, 470 or 570

350 1-1/2” Selectable Gallonage Nozzle

• 12-30-60-80 GPM (45-115-230-300 LPM) at 7 bar (100 psi)
• Slide valve control
• Optional stainless steel spinning teeth
• Compatible with Foam Tube Style 208 (see page 34)

352 1-1/2” Selectable Gallonage Nozzle

• 30-60-80 GPM (115-230-300 LPM) at 7 bar (100 psi) Style 350
• Slide valve control
• Optional stainless steel spinning teeth
• Compatible with Foam Tube Style 208 (see page 34) Style 352

Inlet Weight Flow Settings @ 5 bar (75 psi)

Style Length
Size Lbs(kg) GPM LPM
350 1-1/2” (38mm) 9.7" (247mm) 3 (1.4kg) 12-30-60-80 45-115-230-300
352 1-1/2" (38mm) 9.7" (247mm) 3 (1.4kg) 30-60-80 115-230-300

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 23
HANDLINE NOZZLES LOW PRESSURE NOZZLES

355 1-1/2” Low-Pressure Selectable Gallonage Nozzle

• 30-60-95-125-150 GPM (115-230-360-475-570 LPM) at 5 bar (75 psi)
• Slide valve control
• Optional stainless steel spinning teeth FM PROTEK

• Compatible with Foam Tube Style 209 (see page APPROVED

34) NFPA1964
COMPLIANT

356 1-1/2” Low-Pressure Selectable Gallonage Nozzle

• 30-60-95-125-150 GPM (115-230-360-475-570 LPM) at 5 bar (75 psi)
• Ball valve control
• Optional stainless steel spinning teeth
• Compatible with Foam Tube Style 209 (see page 34)

357 Mid-Range Low-Pressure Selectable Gallonage Nozzle

• 60-95-125-150-200 GPM (230-360-475-570-750 LPM) at 5 bar (75 psi)
• Ball valve control
• Optional stainless steel spinning teeth
• Compatible with Foam Tube Style 209 (see page 34)

Style 355 Style 356 Style 357

Inlet Weight Flow Settings @ 5 bar (75 psi)

Style Length
Size Lbs(kg) GPM LPM

355 1-1/2" (38mm) 11.2" (284mm) 5.3 (2.4kg) 30-60-95-125-150 115-230-360-475-570

356 1-1/2" (38mm) 10.5" (267mm) 5.3 (2.4kg) 30-60-95-125-150 115-230-360-475-570

1-1/2" or 2-1/2"
357 11.9" (302mm) 6.6 (3kg) 60-95-125-150-200 230-360-475-570-750
(38mm or 65mm)

24 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
HIGH PRESSURE NOZZLES

Protek's High Pressure Nozzles are designed to produce powerful streams at higher pressures. Nozzles are
adjustable from straight stream to fog pattern. The ergonomically designed trigger shutoff automatically shuts
off flow when released. In our Style 305 nozzle, the trigger can also be locked in five different positions to control
shutoff, protection fog and straight jet. Our high-pressure piercing applicator with trigger shutoff (Style 304)
provides quick and powerful penetration through masonry walls and hidden trouble spots. Nozzles are designed
for high pressure applications of up to 700 psi (48 bar). Various flow settings are available on request.

Features:
• For high pressure applications up to 700 psi (48 bar)
FM PROTEK
• High quality, harder hitting, straight stream performance
• Customised flow settings available on request APPROVED NFPA1964
COMPLIANT
• Flush without shutting down

Various choice of Breakapart model

selectable flow settings with Style 104 shutoff
Hardcoat anodized
Stainless steel alloy construction
spinning teeth for durability

Style 104 shutoff

Style 302
1" swivel inlet

Additional pistol grip for

excellent control and
reduced fire fighter fatigue

Automatically shuts off

flow when released
Operational
flow lock

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 25
HANDLINE NOZZLES HIGH PRESSURE NOZZLES

High Pressure Nozzles

• For high pressure applications up to 700 psi (48 bar)
• High quality, harder hitting, straight stream performance
• Lightweight and compact
• Trigger shutoff automatically shuts off flow when released Style 302
• 5-10-24-40 GPM (19-37-90-150 LPM)
• Customised flow settings available on request
• Compatible with Foam Tube Style 211 for enhanced foam application (see page 34)

302 High Pressure Nozzle with Trigger Shutoff and Pistol Grip
  • Additional pistol grip for excellent control at high working pressures

303 High Pressure Nozzle with Trigger Shutoff

High Pressure Piercing Applicator with Trigger Shutoff and Pistol Grip
Style 303
304 High Pressure Piercing Applicator with Trigger Shutoff and Pistol Grip
• Hardened tool steel point for driving through windows, crevice in concrete block and mobile homes
• Designed to get water into difficult hidden spots
• Produces impinging jets for a dense fog pattern
Style 304
High Pressure Nozzle with Adjustable Trigger Control
305 High Pressure Nozzle with Adjustable Trigger Control
• Suitable for single-hand operation
• Chrome-plated brass and stainless steel construction
Style 305
• For operating pressures between 10 bar to 50 bar
• Trigger can be locked in five different positions from shutoff to protecting fog to straight jet

High Pressure Trigger Shutoff and Pistol Grip

306 High Pressure Trigger Shutoff and Pistol Grip
• Capacity to flow 50 GPM (200 LPM) at 580 psi (40 bar)
• Quick connecting system, very easy to extend with foam unit
Style 306

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
302 1" (25mm) 19.7" (500mm) 4.6 (2.1kg) 5-10-24-40@100psi 19-37-90-150@7bar
303 1" (25mm) 13" (330mm) 3.7 (1.7kg) 5-10-24-40@100psi 19-37-90-150@7bar
304 1" (25mm) 38" (965mm) 7 (3.2kg) 15 @ 100 psi 55 @ 7 bar
305 1" (25mm) 16" (406mm) 5.5 (2.5kg) 17 or 30@145psi 65 or 115@10bar
306 1" (25mm) 16" (406mm) 4.4 (2kg) 50 @ 580 psi 200 @ 40 bar

26 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SHOCKLESS NOZZLES

Shockless Nozzles
• Constant flow nozzles with multiple pattern setting
• Tough, corrosion resistant design for harsh industrial and marine environment
• Twist shutoff control reduces the jet reaction force at initial discharge
• Simple operation via the following settings: Off - Fog - Jet - Fog - Off
• Wide 120˚ fog pattern provides optimum fire fighter protection
• Durable brass construction

387-BC Shockless Nozzle

• Standard 95 GPM (360 LPM)
• Other flows available on request
Style 387-BC
• 1-1/2" threaded or 2-1/2" BIM

388-BC Shockless Nozzle

• Standard 200 GPM (750 LPM)
• Other flows available on request
• 1-1/2", 2-1/2" threaded or 2-1/2" BIM
Style 388-BC

Protek Shockless Nozzle: Typical Nozzle:

Fog pattern at initial discharge significantly Jet stream pattern at initial
reduces fire fighter fatigue by reducing discharge creates reaction
reaction torque torque for fire fighter

FM PROTEK
APPROVED NFPA1964
COMPLIANT

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
1-1/2"(38mm) or
387-BC 8.6" (220mm) 6.8 (3.1kg) 95 360
2-1/2"(65mm)
1-1/2"(38mm) or
388-BC 10.6" (269mm) 12.1 (5.5kg) 200 750
2-1/2"(65mm)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 27
HANDLINE NOZZLES RETRACTABLE FOAM NOZZLES

Protek's Selectable Gallonage Foam Nozzle are combination pattern nozzles with versatile multiple flow settings
and retractable foam aspirating sleeve. The nozzle offers the flexibility to aspirate foam and flow stream and fog in
a single dynamic model. Available in either lightweight hardcoat anodized aluminium or corrosion resistant brass
construction. Nozzles are available in tip only configuration and shutoff combinations.

Features:
• Designed for water and foam applications with Class A, AFFF foam and other various foam types
• Dynamic nozzle with retractable foam aspiration sleeve
• Suitable for use with eductors and on-board foam proportioning systems
• Efficiently transforms from aspirated foam to wide protective fog pattern

Laser-etched anodized Unique serial number

label for excellent etched for easy New and improved
durability and visibility Large metal �low identi�ication handle design
selection ring for
Flush without enhanced grip
changing pattern
or shutting down Reinforced metal pieces
improve durability

Baf�le etched Stainless �ilter mesh

with pressure prevents blockage
(psi and bar) caused by debris

Choice of 1-1/2”NH inlet

or 2-1/2” BIM inlet

Style 366E-BC

Stainless steel
spinning teeth Heavy-duty chhrome
plated metal shutoff
ball for smooth action
Eronomic design pistol grip and long life
(available in various colours, see page 40)

To activate aspirating function, slide the outer sleeve forward and adjust to narrow
fog or stream pattern in order to control reach and aspiration.
If immediate wide fog pattern is required, the sleeve can be retracted instantly
to its water discharge position.
Inbuilt foam
aspirating sleeve

28 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
RETRACTABLE FOAM NOZZLES

366E-Series Selectable Gallonage Foam Nozzle

• Combination pattern nozzle with versatile multiple flow settings
• Ability to instantly aspirate foam by sliding inbuilt sleeve forward
• No foam aeration tube required for aspiration foam
• Stainless steel spinning teeth for superior fog pattern
• 30-60-95-125 GPM (115-230-360-475 LPM)
• Standard operating pressure at 100 psi (7 bar), optional 85 psi (6 bar) or 75 psi (5 bar)
• Optional 2-1/2” inlet size

366E 1-1/2" Selectable Gallonage Foam Nozzle

366E-TO 1-1/2" Selectable Gallonage Foam Nozzle Tip Only

366E-BC 1-1/2" Selectable Gallonage Foam Nozzle

  • Industrial nozzle
  • Brass construction

366E-BCTO 1-1/2" Selectable Gallonage Foam Nozzle Tip Only

  • Brass construction

Style 366E Style 366E-TO Style 366E-BC Style 366E-BCTO

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
10" to 12.5"
366E 1-1/2"(38mm) 4.6(2.1kg) 30-60-95-125 115-230-360-475
(256mm-316mm)
6.3" to 8.7"
366E-TO 1-1/2"(38mm) 3.1 (1.4kg) 30-60-95-125 115-230-360-475
(160mm-220mm)
10" to 12.5"
366E-BC 1-1/2"(38mm) 8.8(4kg) 30-60-95-125 115-230-360-475
(256mm-316mm)
6.3" to 8.7"
366E-BCTO 1-1/2"(38mm) 6.4(2.9kg) 30-60-95-125 115-230-360-475
(160mm-220mm)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 29
HANDLINE NOZZLES RETRACTABLE FOAM NOZZLES

372E-Series Constant Gallonage Foam Nozzle

• Combination pattern nozzle with versatile multiple flow settings
• Ability to instantly aspirate foam by sliding inbuilt sleeve forward
• No foam aeration tube required for aspiration foam
• Stainless steel spinning teeth for superior fog pattern
• 60, 95 or 125 GPM (230, 360 or 475 LPM)
• Standard operating pressure at 100 psi (7 bar), optional 85 psi (6 bar) or 75 psi (5 bar)
• Optional 2-1/2” inlet size

372E 1-1/2" Selectable Gallonage Foam Nozzle

372E-TO 1-1/2" Selectable Gallonage Foam Nozzle Tip Only

372E-BC 1-1/2" Selectable Gallonage Foam Nozzle

  • Industrial nozzle
  • Brass construction

372E-BCTO 1-1/2" Selectable Gallonage Foam Nozzle Tip Only

  • Brass construction

Style 372E Style 372E-TO Style 372E-BC Style 372E-BCTO

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM
8.3” to 11.4”
372E 1-1/2"(38mm) 4.4 (2kg) 60, 95 or 125 230, 360 or 475
(210mm-290mm)
5.5” to 8.8”
372E-TO 1-1/2"(38mm) 2.9 (1.3kg) 60, 95 or 125 230, 360 or 475
(140mm-225mm)
8.3” to 11.4”
372E-BC 1-1/2"(38mm) 8.8 (4kg) 60, 95 or 125 230, 360 or 475
(210mm-290mm)
5.5” to 8.8”
372E-BCTO 1-1/2"(38mm) 5.5 (2.5kg) 60, 95 or 125 230, 360 or 475
(140mm-225mm)

30 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SELF-EDUCTING HANDLINE NOZZLES

Self-Educting Nozzle
236 Self-Educting Nozzle
• Inbuilt eductor draws in foam concentrate as water passes through the nozzle
• Easy to use and quick to set up as any fire water stream becomes foam enhanced
• Can be operated efficiently by a single fire fighter, freeing up additional personnel
• Variable pattern control from straight stream to fog pattern
• Suitable for various foam types: AFFF, AR/AFFF, Class A and Haz Mat foams
• Operates effectively as low as 50 psi (3.5 bar)
• 95 GPM at 200 psi is the ideal setting for foam application
• Complete with 6-1/2’ pickup hose and 15” stainless steel tube
• Optional Style 212 foam tube

Style 236

Optional Style 212 foam tube

1. Water enters
3. Foam solution
the nozzle inlet
is generated and
discharged

2. Inbuilt eductor
draws in and processes
foam concentrate via
the pick up hose 6-1/2’ pickup hose and
15” stainless steel tube

Inlet Foam Effective Weight

Style Flow Rate
Size Proportioning Reach Lbs (kg)
1-1/2" (38mm) or
236 95GPM (360LPM) 3% 120 Feet (36m) 8.1 (3.7kg)
2-1/2" (65mm)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 31
HANDLINE NOZZLES FOAM NOZZLES

High Pressure Self-Educting Nozzle High pressure

trigger shutoff
204 High Pressure Self-Educting Nozzle Foam
• Self-educting for ease of use with foam application expansion
• Easy to use and quick to set up tube
• Additional pistol grip for excellent control
Foam
• Trigger shutoff automatically shuts off flow when released concentrate
• No more than 2 seconds to connect the foam unit to pistol container
• By changing only the reservoir, foam-unit can be used for
different purposes, e.g. cleaning up an oil trail Style 204
• 12 GPM at 100 psi working pressure is the ideal setting for foam application
• Foam application rate at the ideal setting is 1 litre per 45 seconds
• 2- litre foam concentrate container
• Combination of Style 306 and foam expansion tube with container

Inlet Foam Weight

Style Flow Rate
Size Proportioning Lbs (kg)
204 1"NST or BSP 12 GPM (45 LPM) 3% 7.4 (3.4 kg)

Dual-Flow Foam Nozzle

• Selectable dual-flow design with 60 GPM (230 LPM) and 125 GPM (475 LPM)
• Adjust flows by turning the flow selection ring
• Trigger shutoff automatically shuts off flow when released
(optional ball valve)
• Foam dispersion jaws enable change of foam application pattern
• Stainless steel air aspirating expansion tube and foam dispersion jaws
• Additional pistol grip for excellent control
Style 238
238  Dual-Flow Foam Nozzle
• Expansion rate of up to 15:1 with AFFF
• Optional 2-1/2" inlet

Inlet Weight Flow Settings

Style Length
Size Lbs(kg) GPM LPM

238 1-1/2" ( 38mm ) 22.8" (580mm) 9.5 (4.3kg) 60 and 125 230 and 475

Flow Rate Foam Flat Fan Spray Range

Pressure
(LPM) Expansion Rate Footprint (Meters)
230 LPM 7 BAR 1 : 15 10M � 5M 16
475 LPM 7 BAR 1 : 15 12M � 5M 16

32 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
FOAM NOZZLES

Dual-Agent Nozzles
• Designed to discharge water/AFFF and dry chemical extinguishing agent, separately or at the same time
• Adjacent nozzles mounted on a single pistol grip enhance flexibility and control
• The water/AFFF nozzle has a ball valve control with optional flows of 60 GPM or 95 GPM (both at 100 psi)
• The dry chemical nozzle is designed for an application rate of 5 lbs per second
• Hardcoat anodized aluminium construction for resistance to corrosion and wear and tear
• The discharge end of dry chemical nozzle is equipped with straightening fin for maximum reach

277 1" Dual-Agent Nozzle

• 60 GPM at 100 psi
• Optional 1" or 1-1/2" inlet size

279 1-1/2" Dual-Agent Nozzle

• 60, 95 or 125 GPM at 100 psi
• 1-1/2" inlet size

Style 277 or 279

Flow Range Water Dry Chemical Dry Chemical

Style (AFFF / Water) (AFFF / Water)
At 100 PSI At 100 PSI Inlet Inlet Discharge
277 60 GPM 105 Feet 1" or 1-1/2" 1" NPT 5 Lbs / Sec
279 60, 95 or 125 GPM 120 Feet 1-1/2" 1" NPT 5 Lbs / Sec

Dry Chemical Nozzle

280 Dry Chemical Nozzle

• Slide valve control
• 5 lbs per second application rate
• Effective reach of 20m (65 feet)
• Designed to withstand the abrasive
 impact of the dry chemical agent
• Optional 1" or 1-1/2" inlet size

Style 280

Inlet Weight Dry Chemical

Style Length
Size Lbs(kg) Discharge
280 1" or 1-1/2" 7.8" (200mm) 2.2 (1.0kg) 5 Lbs / Sec

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 33
HANDLINE NOZZLES FOAM AERATION TUBES

Foam Aeration Tubes

• Designed for quick and easy attachment to Protek's handline nozzles
• Enhanced foam quality and stability
• Compatible with many foam concentrates
• Expansion rates of up to 12:1
• Weight: 2.6 lbs (1.2 kg)
• Use the table below to determine the proper nozzle/foam tube configuration
Foam Compatible Handline Nozzles*
Aeration Selectable EN Multi- Multi- Constant High Self-
Tubes Gallonage Selectable Purpose Mode Automatic Gallonage Pressure Educting
Gallonage
208 350, 352 325
209 355, 356, 357 326
210 360, 360-BC, 361, 2360, 2361
361-F, 362
211 307, 360-BA 371 302, 303
212 366-BA 332 310, 311 372, 372-BC, 236
372-BA
320, 366, 366-BI, 366-BC,
213 366-F, 366-K, 366-L, 2365, 2366 372-F
379
373, 373-BC,
367-BA, 368-BA, 373-BA, 374,
214 369-BA, 368-TP, 333 312 374-BC, 374-TP,
368-BCTP
374-BCTP
215 367, 367-BC, 368,
368-BC, 369,
216 321, 322, 322-SP
217 314, 314-TP 375
218 323, 323-DP
219 324, 324-TP
220 390 2368,
2368-TP
* Abovementioned foam tubes are compatible with Protek nozzles only. Contact our Sales Department for foam tubes that are compatible with OEM nozzles.

Medium Expansion Foam Aeration Tubes

• Compact, lightweight and rugged design
• Stainless steel construction for long-lasting service life
• Designed for quick and easy attachment to Protek's handline nozzles
• Produces a thick foam blanket with the nozzle pattern in a wide fog position
• Produces a higher expansion foam for better reach with a straight stream pattern
• Wide expansion ratios of up to 50:1
• Maximum flow: 250 GPM (950 LPM) Style 225, 226, 227
• Maximum pressure: 100 psi (7 bar)
• Weight: 3 lbs (1.5 kg) Shown with Style 366 nozzle
• Length: 9"; Diameter: 6"
Foam Compatible Handline Nozzles
Aeration Selectable En Selectable Constant
Tubes Gallonage Gallonage Gallonage
225 360, 360-BC, 360-BA, 361, 361-F, 362 2360, 2361
226 366, 366-BI, 366-BC, 366-F, 366-K, 366-L, 379 2365, 2366 372-F
227 367, 367-BC, 367-BA, 368, 368-BC, 368-BA, 369, 369-BA 2368
* Abovementioned foam tubes are compatible with Protek nozzles only. Contact our Sales Department for foam tubes that are compatible with OEM nozzles.

34 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
BALL SHUTOFFS & PLAYPIPES

Ball Shutoffs & Playpipes

• Provides versatile combination with Protek's nozzle tips and various smooth bore tips
• Designed and constructed for rugged use and reliable performance
• Lightweight alloy or brass construction
• Available inlet size for shutoff: 1" (25 mm), 1-1/2" (38 mm) or 2-1/2" (65 mm)
• Waterway for shutoff are available in 3/4" (19 mm), 1" (25 mm), 1-3/8" (35 mm) or 1-1/2" (38 mm)
• Pistol grip mounted below the valve of ball shutoff
• Playpipe is available with or without shutoff

100 Ball Shutoff

• Lightweight alloy
Style 100
• 3/4" (19 mm) waterway
• 1" (25 mm) swivel female inlet x 1" (25 mm) male outlet

101 Ball Shutoff Style 101

• Lightweight alloy
• 1" (25 mm) waterway
• 1-1/2" (38 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

101-BC Ball Shutoff

• Brass construction Style 101-BC
• 1" (25 mm) waterway
• 1-1/2" (38 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

102 Ball Shutoff

• Lightweight alloy Style 102
• 1-3/8" (35 mm) waterway
• 1-1/2" (38 mm) or 2-1/2" (65 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

Weight Threads Waterway Pistol

Style Length
Lbs(kg) Inlet Female Outlet Male Size Grip
100 5.1" (130mm) 1.5 (0.7kg) 1" (25mm) 1" (25mm) 3/4" (19mm) YES
101 6.7" (170mm) 2.2 (1kg) 1-1/2" (38mm) 1-1/2" (38mm) 1" (25mm) YES
101-BC 6.7" (170mm) 4.8 (2.2kg) 1-1/2" (38mm) 1-1/2" (38mm) 1" (25mm) YES
1-1/2" or 2-1/2"
102 6.7" (170mm) 3 (1.4kg) 1-1/2" (38mm) 1-3/8" (25mm) YES
(38mm or 65mm)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 35
HANDLINE NOZZLES BALL SHUTOFFS & PLAYPIPES

102-BC Ball Shutoff

• Brass construction
• 1-3/8" (35 mm) waterway
• 1-1/2" (38 mm) or 2-1/2" (65 mm) swivel female inlet x 1-1/2" (38 mm) male outlet
Style 102-BC
103  Ball Shutoff
• Lightweight alloy
• 1-1/2" (38 mm) waterway
• 2-1/2" (65 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

104  Trigger Shutoff

• Lightweight alloy
Style 103
• 1" (25mm) swivel female inlet x 1" (25mm) male outlet Style 104

Weight Threads Waterway Pistol

Style Length
Lbs (kg)
Inlet Female Outlet Male Size Grip
1-1/2" or 2-1/2"
102-BC 6.7" (170mm) 6.4 (2.9kg) 1-1/2" (38mm) 1-3/8" (35mm) YES
(38mm or 65mm)
103 7.8" (200mm) 4.2 (1.9kg) 2-1/2" (65mm) 1-1/2" (38mm) 1-1/2" (38mm) YES
104 8.3" (210mm) 2.6 (1.2kg) 1" (25mm) 1" (25mm) n/a YES

130   Playpipe
Style 130
• Lightweight alloy
• 1-3/8" (35 mm) shutoff waterway
• 2-1/2" (65 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

130-BC  Playpipe
• Brass construction

132   Playpipe
Style 130-BC
• Lightweight alloy
• No shutoff
• 2-1/2" (65 mm) swivel female inlet x 1-1/2" (38 mm) male outlet

Style 132

Weight Threads Waterway

Style Length
Lbs (kg) Inlet Female Outlet Male Size
130 10.2" (260mm)   6.1" (2.8kg) 2-1/2" (65mm) 1-1/2" (38mm) 1-3/8" (35mm)
130-BC 10.2" (260mm) 12.5" (5.6kg) 2-1/2" (65mm) 1-1/2" (38mm) 1-3/8" (35mm)
132 10.2" (259mm)  4.4" (2kg) 2-1/2" (65mm) 1-1/2" (38mm) 1-3/8" (35mm)

36 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
SMOOTH BORE TIPS

Smooth Bore Tips

• Protek's smooth bore tips produce concentrated water flow for maximum reach
• Compatible with Protek's handline nozzles and monitors
• Wide range of discharge sizes to suit all needs
• Lightweight hardcoat anodized aluminium
• Stacked tips provide up to four orifices for customised smooth bore
• Easy-to-read discharge sizes that are laser engraved on the tips
105 Handline Tip
• 1-1/2" base thread x 1-1/2" outlet thread
106 Plain Tip
• 1-1/2" inlet
112 Dual Stacked Tips
• 1-1/2" inlet
115 Triple Stacked Tips
• 1-1/2" inlet Style 105 Style 106 Style 112
117 Plain Deluge Tip
• 2-1/2" inlet
118 Quad Stacked Tips
• 2-1/2" inlet
120 Quad Stacked Tips
• 2-1/2" inlet
121 Quad Stacked Tips
• Stream shaper
• 3-1/2" inlet
Style 115 Style 117 Style 118, 120 Style 121
Weight Orifices Thread Sizes
Style Length
Lbs(kg) Standard Optional Base Middle Tip
3" 0.7 7/8" 1/2", 5/8", 3/4", 15/16", 1-1/2" 1-1/2"
105 1", 1-1/8"
(76mm) (0.3) (22mm) (13, 16, 19, 24, 25, 28mm) (38mm) (38mm)
5" 0.7 1-3/8" 3/4", 7/8", 1", 1-1/8", 1-1/4" 1-1/2"
106
(127mm) (0.3) (35mm) (19, 22, 25, 28, 32mm) (38mm)
6.5" 0.7 15/16"� 1/2" or 1-1/8"� 1/2" 1-1/2" 1"
112
(165mm) (0.3) (23�13 or 28�13mm) (38mm) (25mm)
8" 0.7 1"�1-1/8"�1-1/4" 1-1/2" 1-1/2" 1-1/4"
115
(203mm) (0.3) (25�28�32mm) (38mm) (38mm) (32mm)
1-1/4", 1-3/8", 1-3/4",
9" 1.3 1-1/2" 2-1/2"
117 2", 2-1/4"
(229mm) (0.6) (38mm) (65mm)
(32, 35, 44, 51, 57mm)
12.8" 1.7 1"�1-1/8"�1-1/4"�1-1/2" 2-1/2" 2" 1-1/2"
118
(325mm) (0.8) (25�28�32�38mm) (65mm) (50mm) (38mm)
12.8" 1.7 1-3/8"�1-1/2"�1-3/4"�2" 2-1/2" 2" 1-1/2"
120
(325mm) (0.8) (35�38�44�50mm) (65mm) (50mm) (38mm)
17.3"~21.7" 1.7 3-1/2" 2-3/4" 2-1/8"
121 (440mm~ 2-1/8" X 2-1/2" X 2-3/4" X 3"
(0.8) (53 x 65 x 69 x 75mm) (90mm) (69mm) (53mm)
551mm)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 37
HANDLINE NOZZLES SHUTOFFS WITH TIPS

Shutoff with Tips

155 Shutoff with Tip
• Combination of Style 105 handline tip and Style 102 shutoff (see page 35)
• Shutoff waterway: 1-3/8"
• Orifice size: standard 7/8" and optional 1/2", 3/4", 15/16", 1" or 1-1/8"
• 1-1/2" female inlet x 1-1/2" male outlet

162 Shutoff with Dual Stacked Tip Style 155

• Combination of Style 112 dual stacked tips
and Style 101 shutoff (see page 35)
• Shutoff waterway: 1"
• Orifice size: 15/16" x 1/2"
Style 162
• 1-1/2" inlet

176 Shutoff with Tip

• Combination of Style 106 plain tip and
Style 102 shutoff (see page 35)
• Shutoff waterway: 1-3/8" Style 176
• Orifice size: 1-3/8"
• 1-1/2" or 2-1/2" inlet

178 Playpipe with Stacked Tip

• Combination of Style 115 triple stacked tips
and Style 130 playpipe (see page 36)
• Shutoff waterway: 1-3/8"
• Orifice size: 1" x 1-1/8" x 1-1/4"
• 2-1/2" inlet

182 Playpipe with Stacked Tip Style 178

• Combination of Style 115 tips, Style 102 shutoff (no pistol grip)
and Style 132 playpipe (see page 36)
• Shutoff waterway: 1-3/8"
• Orifice size: 1" x 1-1/8" x 1-1/4"
• 2-1/2" inlet Style 182

Weight Shutoff
Style Length Orifices Inlet Size
Lbs(kg) Waterway Size
7/8" (standard)
155 9.8" (249mm) 3.7 (1.7kg) 1-1/2" (38mm) 1-3/8" (35mm)
(22mm)
15/16"� 1/2"
162 11.4" (290mm) 3.7 (1.7kg) 1-1/2" (38mm) 1" (25mm)
(24�13mm)
1-3/8" 1-1/2" or 2-1/2"
176 10.2" (259mm) 3.5 (1.6kg) 1-3/8" (35mm)
(35mm) (38mm or 65mm)
1"�1-1/8"�1-1/4"
178 13.4" (340mm) 7 (3.2kg) 2-1/2" (65mm) 1-3/8" (35mm)
(25�28�32mm)
1"� 1-1/8"�1-1/4"
182 23.6" (599mm) 8.4 (3.8kg) 2-1/2" (65mm) 1-3/8" (35mm)
(25�28�32mm)

38 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 HANDLINE NOZZLES
NOZZLE ACCESSORIES

Nozzle Accessories
111 Stream Shaper for Handline Nozzles
• Inbuilt vanes keep flow laminar
• Improves reach and straight jet performance
• 1-1/2" female inlet x 1-1/2" male outlet

129 Pistol Grip Adapter

• 1-1/2" inlet x 1-1/2" outlet

191 Folding Coupling Spanner

• Lightweight and compact Style 111 Style 129
• Fits Storz, rocker/lug pin coupling

135 British Instantaneous Adapter

• BI male (1-1/2") x 1-1/2" male thread
• Hardcoat anodized lightweight alloy
• Internally profiled for reduced turbulence

133 British Instantaneous Adapter

• BI male (2-1/2") x 1-1/2" male thread Style 191
• Hardcoat anodized lightweight alloy Style 133
• Internally profiled for reduced turbulence

133-BC British Instantaneous Adapter

• BI male (2-1/2") x 1-1/2" male thread
• Brass construction
• Internally profiled for reduced turbulence

137 British Instantaneous Adapter

• BI male (2-1/2") x 2-1/2" male thread
• Hardcoat anodized lightweight alloy Style 139
• Internally profiled for reduced turbulence

139 Machino Adapter

Style 150
• 1-1/2", 2" or 2-1/2" Machino x 1-1/2" or 2-1/2" male thread
150 Flexible Joint Style Inlet Outlet
• Improves nozzle handling 111 1-1/2" Female 1-1/2" Male
• Easy to move from stiff hose line 129 1-1/2" Female 1-1/2" Male
• 1-1/2" inlet x 1-1/2" outlet 135 1-1/2" Male 1-1/2" Male
133 2-1/2" Male 1-1/2" Male
133-BC 2-1/2" Male 1-1/2" Male
FM PROTEK
137 2-1/2" Male 2-1/2" Male
APPROVED NFPA1964
COMPLIANT 1-1/2" Female 1-1/2" Male
139 2" Female 1-1/2" Male
2-1/2" Female 2-1/2" Male
150 1-1/2" Female 1-1/2" Male

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 39
HANDLINE NOZZLES NOZZLE BASE & TEETH, PISTOL GRIPS & HANDLES

Optional Nozzle Base & Teeth

• A range of optional nozzle base are available on request
• Standard NST swivel base in 1" (25 mm), 1-1/2" (38 mm) and 2-1/2" (65 mm)
• British Instantaneous connector in 1-1/2" (38 mm) and 2-1/2" (65 mm)
• BSP threaded male or female Storz adapter in 1-1/2" (38 mm) and 2-1/2" (65 mm)
• Japanese Machino adapters
• Optional nozzle teeth are available on request
• Stainless steel spinning teeth with retaining ring across most models
• Optional one-piece moulded fixed teeth ring

British Instantaneous Storz Machino Spinning or fixed teeth

Pistol Grips & Handles

• Colour code your nozzles
• Eight colours are available for shutoff handles and pistol grips on most Protek nozzles at no extra charge
• Simply specify your colour preference at the time of ordering or order separately for easy retrofitting
• Available colours are: blue, green, white, black, orange, red, grey and yellow
• Unless specified at the time of ordering, nozzles will be shipped with black handles and pistol grips

Available
colours:
• Blue
• Orange
• Green
• Red
• White
• Gray
• Black
• Yellow

Unless specified at the time of ordering, nozzles will be shipped with black handles and pistol grips

40 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 SPECIALITY NOZZLES
WILDLAND / FORESTRY NOZZLES

Wildland/Forestry Nozzles
Protek’s Wildland/Forestry Nozzles are designed for the rugged simplicity required in wildland/forestry
applications. These are combination pattern nozzles with selectable flow settings, ensuring reliable
performance in the open environment. Nozzles are small, lightweight and very easy to operate.

307 Wildland/Forestry Nozzle

• Combination pattern nozzle with variable flow setting: 8-15-30 GPM (30-60-115 LPM)
• Easy to operate with a-quarter turn from straight stream to fog at any flow setting
• Simple twist action controls flow setting and shut off
• NFPA compliant
Style 307

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
307 1" (25mm) 5.5" (140mm) 1.5 (0.7kg) 8-15-30 30-60-115

309 Wildland/Forestry Nozzle

• Easy to use and rugged design
• Combination pattern nozzle with adjustable dual flow setting: 10-30 GPM (37-115 LPM)
• Simple twist operation enables the following settings:
1. Off
2. Low-flow straight stream
3. Low-flow narrow fog
4. High-flow straight stream
5. High-flow fog

FM PROTEK
APPROVED NFPA1964
COMPLIANT Style 309

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
309 1" (25mm) 3.5" (89mm) 0.7 (0.3kg) 10-30 37-115

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 41
SPECIALITY NOZZLES MARINE NOZZLES

Marine Nozzles
Protek’s Marine Nozzles are specifically designed and manufactured for fire fighting in the harsh
corrosive marine environment. These nozzles meets the stringent performance requirements of the US
Coast Guard. Nozzles are also suitable for use in the shipping industry, refineries, chemical complexes
and offshore drilling/production rigs. All Protek Marine Nozzles are ideal for AFFF applications.

366-BC Shipboard Selectable Gallonage Nozzle FM PR

• Rugged, corrosion resistant, brass construction APPROVED NFP
COM
• 30-60-95-125 GPM (115-230-360-475 LPM)
• Optional 2-1/2" inlet
• 100 psi (7 bar) standard, 75 psi (5 & 6 bar) optional
• Compatible with Foam Tube Style 213 (see page 24) Style 366-BC

366-BCSP Shipboard Selectable Gallonage Nozzle

• 366-BC nozzle with lockable flow rate functionality

Style 366-BCSP
372-BC 1-1/2" Shipboard Constant Gallonage Nozzle Lockable flow Rate
• Rugged, corrosion resistant, brass construction
• 60, 95 or 125 GPM (230, 360 or 475 LPM)
• Optional 2-1/2" inlet
• Flow setting at 100 psi (7 bar) operating pressure FM PRO
APPROVED NFPA
• Compatible with Foam Tube Style 212 (see page 24) COMP

374-BC 2-1/2" Shipboard Constant Gallonage Nozzle

Style 372-BC
• Rugged, corrosion resistant, brass construction
• 150, 175, 200 or 250 GPM (550, 660, 750 or 950 LPM)
• Optional 1-1/2" inlet
• Flow setting at 100 psi (7 bar) operating pressure
• Compatible with Foam Tube Style 214 (see page 24)
Style 374-BC

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
366-BC 1-1/2" (38mm) 9" (228mm) 8.3 (3.7kg) 30-60-95-125 115-230-360-475
366-BCSP 1-1/2" (38mm) 9" (228mm) 8.3 (3.7kg) 30-60-95-125 115-230-360-475
372-BC 1-1/2" (38mm) 8.5" (216mm) 7.5 (3.4kg) 60, 95 or 125 230, 360 or 475
374-BC 2-1/2" (65mm) 11" (279mm) 14.7 (6.7kg) 150, 175, 200 or 250 550, 660, 750 or 950

42 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 SPECIALITY NOZZLES
MARINE NOZZLES

Marine Nozzles

382 Coast Guard Nozzle with Fog Tip

• Brass construction for corrosion resistance
• Meets US Coast Guard specifications for fighting fires with drafted water
• US Coast Guard Approval Number: 162.027/18/0
• Combination of fog and straight stream
• 50 GPM (210 LPM) at orifice size of 5/8"
• Non-clogging design

385 4' Coast Guard Applicator with Fog Heads

• 4' long with 60˚ bend Style 382
• Meets Coast Guard specifications

386 6' Coast Guard Applicator with Fog Heads

• 6' long with 60˚ bend
• Meets Coast Guard specifications Style 386

Inlet Weight Flow Settings

Style Length Orifice
Size Lbs (kg) GPM LPM
382 1-1/2" (38mm) 9.4" (239mm) 7.9 (3.5kg) 5/8" 55 208
385 Quick Connection 4' (1219mm) 5 (2.2kg) n/a 54 204
386 Quick Connection 6' (1828mm) 6 (2.7kg) n/a 54 204

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 43
SPECIALITY NOZZLES SPECIALITY NOZZLES

Flashover Nozzle
320 Flashover Nozzle
• Designed for flashover operation
• Durable valve design suitable for quick continuous open/close operation
• One click to flashover position
• Raised lug on the bumper for flashover fog pattern identification
• Combination pattern nozzle with multiple flow settings
• 30-60-95-125 GPM (115-230-360-475 LPM)
• Compatible with Foam Tube Style 213 (see page 34) Style 320

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
320 1-1/2" (38mm) 9.3" (236mm) 3.5 (1.6kg) 30-60-95-125 115-230-360-475

Electric Nozzle
379 Electric Nozzle
• Designed for use in Class C Hazards
• Safe to use at a distance greater than 10' from electrical equipment
• Designed to produce either wide or narrow fog settings only
• Multiple flow settings
• 30-60-95-125 GPM (115-230-360-475 LPM) Style 379
• Compatible with Foam Tube Style 213 (see page 34)

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
379 1-1/2" (38mm) 9" (228mm) 3.9 (1.7kg) 30-60-95-125 115-230-360-475

Deicing Nozzle
392 Deicing Nozzle
• Metal ball and heat resistant EPDM seats
• Suitable for Type 1 and Type 4 deicing fluids
• Low turbulence design
• Flushing capability
• 13-25-40-60 GPM (50-100-150-230 LPM)
Style 392

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
392 1" (25mm) 7.4" (190mm) 2.3 (1.1kg) 13-25-40-60 50-100-150-230

44 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 SPECIALITY NOZZLES
SPECIALITY NOZZLES

Piercing Applicators

308-3, 308-6 Piercing Applicators

• Designed to efficiently extinguish fire in confined and hard-to-reach areas,
 such as storage facilities, attics, basements and mobile homes
• Quick penetration of glass, crevice in masonry walls, concrete blocks, metal sheets
and plywood
• Provides rapid attack on hidden trouble spots
• Hardened tool steel point Style 308-3
• Impinging jets for a dense fog pattern
• 125 GPM (475 LPM)
• Compatible with Class A and Class B foam application
• Available in 3' or 6' lengths

Style 308-6

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
308-3 1-1/2" (38mm) 37" (940mm) 10.1 (4.6kg) 125 475
308-6 1-1/2" (38mm) 72.4" (1838mm) 15.8 (7.2kg) 125 475

Industrial Fog Nozzle

814 Industrial Fog Nozzle

• Heavy-duty inexpensive combination pattern nozzle
• Suitable for industrial settings, such as refineries,
chemical plants and office complexes
• Twist shutoff
• 95 GPM (360 LPM)
FM PROTEK
APPROVED NFPA1964 Style 814
COMPLIANT

Inlet Weight Flow Settings

Style Length
Size Lbs (kg) GPM LPM
814 1-1/2" (38mm) 3.3" (84mm) 1.6 (0.7kg) 95 360

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 45
MONITOR NOZZLES SELECTABLE GALLONAGE MONITOR NOZZLES

Protek’s Selectable Gallonage Monitor Nozzles are combination pattern, master stream nozzles with four distinct,
calibrated and selectable flow settings. The nozzles allow fire fighters to switch from smooth bore reach and
penetration to fog stream cooling and protection without having to shutdown the water flow to switch tips.
The versatile flow setting reduces the risk of injury from manually changing tips on the deck. All nozzles are
compatible with Protek's wide range of monitors.

Features:
• Selectable flow rate, changeable even during flowing conditions
• Combination of straight stream and variable fog patterns
• Spinning teeth produce dense, wide, fully adjustable fog pattern
• Heavy-duty protective rubber bumper
• Low maintenance components

Spinning teeth for

wide, dense fog pattern Protective rubber bumper

Change pattern from

straight stream to fog
via easy turn of the
control bar

Clear labels for precise

Select flow flow rate and pattern
setting without adjustment
shutting down

Attached to monitor
Style 649, see page 51

Choice of lightweight alloy

or brass construction

Style 847-BC

2-1/2" inlet

46 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITOR NOZZLES
SELECTABLE GALLONAGE MONITOR NOZZLES

846-Series Selectable Gallonage Monitor Nozzles

846, 846-BC Selectable Gallonage Monitor Nozzles
• 250-400-550-750 GPM (950-1600-2000-2900 LPM)
• Optional 500-1000-1500-2000 LPM
• Change flow setting without shutting down Style 846 Style 846-BC
• Available in lightweight alloy or brass construction

847-Series Selectable Gallonage Monitor Nozzles

847, 847-BC Selectable Gallonage Monitor Nozzles
• 300-400-500-600 GPM (1200-1600-2000-2400 LPM)
• Change flow setting without shutting down
Style 847 Style 847-BC
• Available in lightweight alloy or brass construction

848-Series Selectable Gallonage Monitor Nozzles

848, 848-BC Selectable Gallonage Monitor Nozzles
• 500-750-1000-1250 GPM (1900-2900-3800-4800 LPM)
• Change flow setting without shutting down
• Available in lightweight alloy or brass construction Style 848 Style 848-BC

849-Series Selectable Gallonage Monitor Nozzles

849, 849-BC Selectable Gallonage Monitor Nozzles
• 350-500-750-1000 GPM (1325-1900-2900-3800 LPM)
• Change flow setting without shutting down
• Available in lightweight alloy or brass construction
Style 849 Style 849-BC
Flow @ 100 PSI (7 BAR) Weight
Style Material Inlet Teeth Length
GPM LPM Lbs(kg)
2-1/2" 9.3" 6.6
846 Alloy 250-400-550-750 500-1000-1500-2000* Spinning
(65mm) (236mm) (3)
2-1/2" 8.3" 16
846-BC Brass 250-400-550-750 500-1000-1500-2000* Spinning
(65mm) (211mm) (7.3)
2-1/2" 8.3" 6.6
847 Alloy 300-400-500-600 1200-1600-2000-2400 Spinning
(65mm) (211mm) (3)
2-1/2" 8.3" 16
847-BC Brass 300-400-500-600 1200-1600-2000-2400 Spinning
(65mm) (211mm) (7.3)
2-1/2" 9.3" 8.5
848 Alloy 500-750-1000-1250 1900-2900-3800-4800 Spinning
(65mm) (236mm) (3.9)
2-1/2" 9.3" 22
848-BC Brass 500-750-1000-1250 1900-2900-3800-4800 Spinning
(65mm) (236mm) (10)
2-1/2" 9.3" 8.5
849 Alloy 350-500-750-1000 1325-1900-2900-3800 Spinning
(65mm) (236mm) (3.9)
2-1/2" 9.3" 22
849-BC Brass 350-500-750-1000 1325-1900-2900-3800 Spinning
(65mm) (236mm) (10)
* Flow setting of 950-1600-2000-2900 LPM is available on request

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 47
MONITOR NOZZLES ADJUSTABLE FLOW-BAFFLE MONITOR NOZZLES

Protek’s Adjustable Flow-Baffle Monitor Nozzles are combination pattern, master stream nozzles with
selectable flow settings. Flow is adjusted by a simple press-turn motion of the outer spring loaded baffle
and rotating to the laser etched position for the desired flow. Nozzles must be shut down to change
settings. The nozzles have excellent straight stream performance and a wide, dense, fully adjustable fog
pattern. All nozzles are compatible with Protek's wide range of monitors.

Features:
• Spring loaded baffle enables flow rate selection
• Combination of straight stream and variable fog patterns
• Straight stream is clean and far-reaching
• Fog pattern is wide, dense and fully adjustable
• Flow and pressure are laser engraved on the baffle
• Low maintenance, high quality components

Spring loaded baffle

for easy flow selection Change pattern from
straight stream to fog
via an easy turn of the
control bar

Choice of lightweight
FM
alloy or brass construction APPROVED N

Style 823-BC

2-1/2" inlet
(1-1/2" inlet size available in Style 818,
818-BC, 819, 819-BC, 820, 820-BC)

48 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITOR NOZZLES
ADJUSTABLE FLOW-BAFFLE MONITOR NOZZLES

818- and 819-Series Adjustable Flow-Baffle Monitor Nozzles

• Varying flow settings with an easy turn of the baffle
• Spinning teeth
• Optional 2-1/2" inlet size
• Available in lightweight alloy or brass construction

818, 818-BC Adjustable Flow-Baffle Monitor Nozzles

• 15, 30, 45 GPM (56, 115, 170 LPM) Style 818
Style 819
819, 819-BC Adjustable Flow-Baffle Monitor Nozzles Style 820
• 60, 95, 125 GPM (230, 360, 475 LPM)

820-Series Adjustable Flow-Baffle Monitor Nozzles

• Varying flow settings with an easy turn of the baffle
• Spinning teeth
• Optional 2-1/2" inlet size
• Available in lightweight alloy or brass construction

820, 820-BC Selectable Gallonage Monitor Nozzles

• 200, 250, 350 GPM (750, 950, 1325 LPM) Style 818-BC
Style 819-BC
Style 820-BC

Flow @ 100 PSI (7 BAR) Weight

Style Material Inlet Teeth Length
GPM LPM Lbs(kg)
1-1/2" 5.5" 2.6
818 Alloy 15, 30, 45 56, 115, 170 Spinning
(38 mm) (140mm) (0.2)
1-1/2" 5.5" 7.3
818-BC Brass 15, 30, 45 56, 115, 170 Spinning
(38 mm) (140mm) (3.3)
1-1/2" 5.5" 2.6
819 Alloy 60, 95, 125 230, 360, 475 Spinning
(38 mm) (140mm) (1.2)
1-1/2" 5.5" 7.3
819-BC Brass 60, 95, 125 230, 360, 475 Spinning
(38 mm) (140mm) (3.3)
1-1/2" 5.5" 2.6
820 Alloy 200, 250, 350 750, 950, 1325 Spinning
(38 mm) (140mm) (1.2)
1-1/2" 5.5" 7.3
820-BC Brass 200, 250, 350 750, 950, 1325 Spinning
(38 mm) (140mm) (3.3)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 49
MONITOR NOZZLES ADJUSTABLE FLOW-BAFFLE MONITOR NOZZLES

2-1/2" Adjustable Flow-Baffle Monitor Nozzles

• Varying flow settings with an easy turn of the baffle
• Fixed or spinning teeth
• Available in lightweight alloy or brass construction

822, 822-BC Adjustable Flow-Baffle Monitor Nozzles

• 250, 350, 500 GPM (950, 1325, 1900 LPM) Style 822
• Fixed teeth Style 823
• Inbuilt Stream Shaper for maximum reach PROTEK
FM
APPROVED NFPA1964
823, 823-BC Adjustable Flow-Baffle Monitor Nozzles COMPLIANT

Style 822-BC
• 300, 500, 700 GPM (1140, 1900, 2660 LPM) Style 823-BC
• Fixed teeth
• Inbuilt Stream Shaper for maximum reach
• FM approved (Style 823-BC)
Style 824
824, 824-BC Adjustable Flow-Baffle Monitor Nozzles
• 250, 350, 500 GPM (950, 1325, 1900 LPM)
• Spinning teeth

845, 845-BC Adjustable Flow-Baffle Monitor Nozzles Style 845

• 300, 500, 800, 1000 GPM (1140, 1900, 3030, 3800 LPM)
• Spinning teeth
Style 845-BC

Flow @ 100psi (7 bar) Weight

Style Material Inlet Teeth Length
GPM LPM Lbs(kg)
2-1/2" 6.7" 4.4
822 Alloy 250, 350, 500 950, 1325, 1900 Fixed
(65 mm) (170mm) (2)
2-1/2" 6.7" 12.8
822-BC Brass 250, 350, 500 950, 1325, 1900 Fixed
(65 mm) (170mm) (5.8)
2-1/2" 6.7" 4.4
823 Alloy 300, 500, 700 1140, 1900, 2660 Fixed
(65 mm) (170mm) (2)
2-1/2" 6.7" 12.8
823-BC Brass 300, 500, 700 1140, 1900, 2660 Fixed
(65 mm) (170mm) (5.8)
2-1/2" 5.9" 3.5
824 Alloy 250, 375, 500 950, 1420, 1900 Spinning
(65 mm) (150mm) (1.6)
2-1/2" 5.9" 10
824-BC Brass 250, 375, 500 950, 1420, 1900 Spinning
(65 mm) (150mm) (4.6)
2-1/2" 7.8" 7.9
845 Alloy 300, 500, 800, 1000 1140, 1900, 3030, 3800 Spinning
(65 mm) (198mm) (3.6)
2-1/2" 7.8" 18
845-BC Brass 300, 500, 800, 1000 1140, 1900, 3030, 3800 Spinning
(65 mm) (198mm) (8.2)

50 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITOR NOZZLES
AUTOMATIC MONITOR NOZZLES

830-Series Automatic Monitor Nozzles

• Automatically adjusts to maintain effective stream and maximum reach at variable or reduced flows
• Maintain constant operating pressure over a wide range of flows
• Pattern easily changed from straight stream to fog pattern with large control handle
• Compatible with Protek's wide range of monitors
Style 830
830 Automatic Monitor Nozzle
• 300-1000 GPM (1140-3800 LPM)
• Lightweight alloy

832-Series Automatic Monitor Nozzles

• Automatically adjusts to changes in flow and pressure
• Maintain constant operating pressure over a wide range of flows
• Pattern easily changed from straight stream to fog pattern with large control handle
• Compatible with Protek's wide range of monitors

832 Automatic Monitor Nozzle Style 832

• 300-1000 GPM (1140-3800 LPM)
• Lightweight alloy

833-Series Automatic Monitor Nozzles

• Automatically adjusts to changes in flow and pressure
• Maintain constant operating pressure over a wide range of flows
• Pattern easily changed from straight stream to fog pattern with large control handle
• Compatible with Protek's wide range of monitors

833 Automatic Monitor Nozzle

Style 833
• 300-1250 GPM (1140-4750 LPM)
• Lightweight alloy
• Compatible with Stream Shaper 109
FM PROTEK
APPROVED NFPA1964
COMPLIANT

Flow Range Weight

Style Material Inlet Teeth Length
GPM LPM Lbs(kg)
2-1/2" 8.2" 9.9
830 Alloy 300-1000 1140-3800 Fixed
(65 mm) (208mm) (4.5kg)
2-1/2" 8.2" 9.9
832 Alloy 300-1000 1140-3800 Fixed
(65 mm) (208mm) (4.5kg)
3-1/2" 8.4" 11
833 Alloy 300-1250 1140-4750 Fixed
(89 mm) (212mm) (5kg)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 51
MONITOR NOZZLES CONSTANT GALLONAGE MONITOR NOZZLES

Protek’s Constant Gallonage Monitor Nozzles are combination pattern, master stream nozzles with a fixed
constant flow. The flow rate is factory preset to customers' specifications. Nozzles have built-in stream
shaper designed for maximum reach (Style 825 and 825-BC). Nozzles are adjustable from straight stream
to a dense fog pattern. All nozzles are compatible with Protek's wide range of monitors.

• Simple, rugged nozzle with superior stream quality and reach

• Large handle enables easy stream pattern management
• Available in lightweight alloy or corrosion resistant brass construction

825-Series Constant Gallonage Monitor Nozzles

• Twist shutoff
• Inbuilt Stream Shaper for maximum reach

825, 825-BC Constant Gallonage Monitor Nozzles

• 500, 750, 1000, 1250 GPM (1900, 2900, 3800, 4800 LPM)
• 750 GPM is standard Style 825 Style 825-BC
835-Series Constant Gallonage Monitor Nozzles
• Fixed teeth

835, 835-BC Constant Gallonage Monitor Nozzles

• 750, 1000 GPM (2900, 3800 LPM)
• Single fixed gallonage

837-Series Constant Gallonage Monitor Nozzles Style 835 Style 835-BC

837-BC Constant Gallonage Monitor Nozzles
• Flows up to 2000 GPM (7600 LPM)
• Single fixed gallonage
• Optional flows of between 1000-2000 GPM
in 100 GPM increments
• Compatible with Stream Shaper 109
Style 837-BC

Flow @ 100 psi (7 bar) Weight

Style Material Inlet Length
GPM LPM Lbs(kg)
2-1/2" 9" 13
825 Alloy 500, 750, 1000, 1250 1900, 2900, 3800, 4800
(65 mm) (229mm) (6)
2-1/2" 9" 23
825-BC Brass 500, 750, 1000, 1250 1900, 2900, 3800, 4800
(65 mm) (229mm) (10)
2-1/2" 7" 4.8
835 Alloy 750, 1000 2900, 3800
(65 mm) (178mm) (2.2)
2-1/2" 7" 12.5
835-BC Brass 750, 1000 2900, 3800
(65 mm) (178mm) (5.7)
3-1/2" 11" 35
837-BC Brass 2000 7600
(89 mm) (279mm) (16)

52 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITOR NOZZLES
ELECTRIC MONITOR NOZZLES

Electric Monitor Nozzles

• Electrically operated pattern control for use in remote control applications
• Easily change from solid bore to fog flow streams with a flick of the switch
• Switch from solid bore to fog without shutting down
• Available in either automatic or fixed flow nozzle type
• Spring loaded baffle enables flow rate selection
• Motor (standard 24V or 12V DC on request) totally enclosed and sealed
• Standard manual override when electrical power fails
• Hardcoat anodized aluminium for maximum resistance to corrosion and wear
• Used in conjunction with Protek's remote controlled monitors
• Available in either spinning teeth or fixed teeth

818E Electric Adjustable Flow-Baffle Monitor Nozzle

• 15, 30, 45 GPM (60, 115, 170 LPM)
• 1-1/2" (38 mm) inlet size

819E Electric Adjustable Flow-Baffle Monitor Nozzle

• 60, 95, 125 GPM (230, 360, 475 LPM)
• 1-1/2" (38 mm) inlet size Style 818E, 819E, 820E

820E Electric Adjustable Flow-Baffle Monitor Nozzle

• 200, 250, 350 GPM (750, 950, 1325 LPM)
• 1-1/2" (38 mm) inlet size

817E Electric Adjustable Flow-Baffle Monitor Nozzle Style 817E

• 250, 400, 550, 750 GPM (950, 1525, 2100, 2900 LPM)
• 2-1/2" (65 mm) inlet size

855E Electric Automatic Monitor Nozzle

• 300-1250 GPM (1140-4800 LPM)
• 2-1/2" (65 mm) inlet size
Style 855E

Pattern Flow @ 100 psi(7 bar) Weight

Style Material Teeth Inlet
Control GPM LPM Lbs(kg)
1-1/2" 7
818E Alloy Electric 15, 30, 45 60, 115, 170 Spinning
(38mm) (3.2)
1-1/2" 7
819E Alloy Electric 60, 95, 125 230, 360, 475 Spinning
(38mm) (3.2)
1-1/2" 7
820E Alloy Electric 200, 250, 350 750, 950, 1325 Spinning
(38mm) (3.2)
2-1/2" 8.5
817E Alloy Electric 250, 400, 550, 750 950, 1525, 2100, 2900 Fixed
(65mm) (3.8)
2-1/2" 12
855E Alloy Electric 300-1250 1140-4800 Fixed
(65mm) (5.5)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 53
MONITOR NOZZLES SELF-EDUCTING MONITOR NOZZLES

Self-Educting Monitor Nozzles

• Educt foam at a wide range of flow rates up to 1000 GPM (3800 LPM)
• Transform a water monitor into a foam station without additional equipment
• Designed for use with Class A and B foam
• Combination of straight stream and variable fog patterns
• Interchangeable foam orifice inserts enable variable foam proportioning
• Available in durable lightweight alloy or heavy-duty brass construction
• Optional drum pick up kit comes with 1m rigid PVC tube with shutoff capability and
8’ or 9'pickup hose
• Optional isolation valve for shutoff capability

881-Series Self-Educting Monitor Nozzles

• 150 GPM (550 LPM)
• Optional 2-1/2" inlet size
• Metering capability of 3% or 6%
• 9' pickup hose and 15" stainless steel tube Style 881 Style 881-BC
• Available in lightweight alloy or brass construction

881, 881-BC Self-Educting Monitor Nozzles

883-Series Self-Educting Monitor Nozzles

• 225 GPM (850 LPM)
• Optional 2-1/2" inlet size Style 883 Style 883-BC
• Metering rate of 3% or 6%
• 9' pickup hose and 15" stainless steel tube
• Available in lightweight alloy or brass construction
883, 883-BC Self-Educting Monitor Nozzles

9' pickup hose and 15" stainless steel tube

Flow @ 100 psi Weight
Style Material Water Inlet Foam Inlet Proportioning Length
(7 bar) Lbs(kg)
150GPM 1-1/2" 6.3" 6.6
881 Alloy Quick Connection 3%, 6%
(550LPM) (38 mm) (160mm) (3kg)
150GPM 1-1/2" 6.3" 9.9
881-BC Brass Quick Connection 3%, 6%
(550LPM) (38 mm) (160mm) (4.5kg)
225GPM 1-1/2" 6.3" 6.6
883 Alloy Quick Connection 3%, 6%
(850LPM) (38 mm) (160mm) (3kg)
225GPM 1-1/2" 6.3" 9.9
883-BC Brass Quick Connection 3%, 6%
(850LPM) (38 mm) (160mm) (4.5kg)

54 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITOR NOZZLES
SELF-EDUCTING MONITOR NOZZLES

886-Series Self-Educting Monitor Nozzles

• 350 GPM (1325 LPM)
• 2-1/2" inlet size
• Metering capability of 3% or 6%
• 9' pickup hose and 15" stainless steel tube
• Available in lightweight alloy or brass construction
Style 886 Style 886-BC
886, 886-BC Self-Educting Monitor Nozzles

887-Series Self-Educting Monitor Nozzles

• 500 GPM (1900 LPM)
• 2-1/2" inlet size
• Metering capability of 1% or 3%
• 9' pickup hose and 15" stainless steel tube Style 887 Style 887-BC
• Available in lightweight alloy or brass construction

887, 887-BC Self-Educting Monitor Nozzles

888-Series Self-Educting Monitor Nozzles

• 350, 500, 750 GPM (1325, 1900, 2900 LPM)
• 2-1/2" inlet size Style 888 Style 888-BC
• Interchangeable orifice plates for various induction rates
• Metering capability of 1/2%, 1%, 3% or 6%
• 8' pickup hose

888, 888-BC Self-Educting Monitor Nozzles

Orifice Plates for Style 888 and 888-BC

Water Weight
Style Material Flow @ 100psi (7 bar) Foam Inlet Proportioning Length
Inlet Lbs(kg)
350 GPM 2-1/2" 7.1" 7.9
886 Alloy Quick Connection 3%, 6%
(1325 LPM) (65mm) (180mm) (3.6)
350 GPM 2-1/2" 7.1" 15
886-BC Brass Quick Connection 3%, 6%
(1325 LPM) (65mm) (180mm) (6.8)
500 GPM 2-1/2" 7.1" 7.9
887 Alloy Quick Connection 1%, 3%
(1900 LPM) (65mm) (180mm) (3.6)
500 GPM 2-1/2" 7.1" 15
887-BC Brass Quick Connection 1%, 3%
(1900 LPM) (65mm) (180mm) (6.8)
350, 500, 750 2-1/2" 1/2%, 1%, 5.7" 13.2
888 Alloy Quick Connection
(1325, 1900, 2900) (65mm) 3%, 6% (145mm) (6)
350, 500, 750 2-1/2" 1/2%, 1%, 5.7" 21.5
888-BC Brass Quick Connection
(1325, 1900, 2900) (65mm) 3%, 6% (145mm) (9.8)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 55
MONITOR NOZZLES SELF-EDUCTING MONITOR NOZZLES & ACCESSORIES

889-Series Self-Educting Monitor Nozzles

• 1000 GPM (3800 LPM)
FM PROTEK
• 2-1/2" inlet size APPROVED NFPA1964
COMPLIANT
• Metering capability of 1% or 3%
• 8' pickup hose
• Available in lightweight alloy or brass construction
889, 889-BC Self-Educting Monitor Nozzles Style 889 Style 889-BC

Style Material Flow(7@bar)

100 psi Water Inlet Foam Inlet Weight
Proportioning Length Lbs(kg)

889 Alloy 1000GPM 2-1/2" Quick Connection 1%, 3% 9.5" 11.8

(3800LPM) (65mm) (241mm) (5.4)
889-BC Brass 1000GPM 2-1/2" Quick Connection 1%, 3% 9.5" 18.7
(3800LPM) (65mm) (241mm) (8.5)

Isolation Valve And Drum Pickup Kit

• Isolation valve comes with 3/4” orifice size for Style 886, 886-BC, 887
and 887-BC or 1-1/4” orifice size for Style 888, 888-BC, 889 and 889-BC
• Drum pickup kit comes with 1 metre rigid PVC tube with shutoff capability
a nd 8’ or 9' pickup hose with quick connection coupling
Drum Pickup Kit Isolation Valve

Monitor Foam Aeration Tube

221 Monitor Foam Aeration Tube
• Designed for quick and easy attachment
• Enhances foam quality and stability
• Compatible with Style 822, 822-BC, 823, 823-BC,
886, 886-BC, 887 and 887-BC monitor nozzles
Shown with Style 221
Style 887 nozzle

Stream Shaper
• Used to strengthen water flow
• Features replaceable vanes for easy repair
109 Stream Shaper
• 3-1/2" female inlet x 3-1/2" male outlet
119, 119-BC Stream Shaper
• 2-1/2" female inlet x 2-1/2" male outlet
Weight Style 109
Style Material Inlet Outlet Length
Lbs(kg)
3-1/2" 3-1/2" 4.9" 2.6
109 Alloy
(90mm) (90mm) (125mm) (1.2)
2-1/2" 2-1/2" 4.2" 2.2
119 Alloy
(65mm) (65mm) (107mm) (1)
2-1/2" 2-1/2" 4.2" 4.4
119-BC Brass
(65mm) (65mm) (107mm) (2) Style 119 Style 119-BC

56 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
MONITORS

Protek manufactures a wide selection of Monitors that suit every fire ground need from manual to electric
monitors. Protek's rugged, lightweight monitors optimise advanced computer aided design and testing
technology, offering features such as cast-in vanes for high flow efficiency and minimised flow turbulence.
Protek Industrial Monitors are highly manoeuvrable and easy to operate. With performance of up to 2000
GPM (7570 LPM), Protek Monitors offer optimal coverage in industrial, mining and marine environments.
Monitors are compatible with Protek diverse range of master stream nozzles.

Features:
• Corrosion resistant brass construction
• Ideal for marine, offshore, industrial and other corrosive environment
• Cast-in turning vanes for efficient flow and minimal friction loss
• Operating pressure of 200 psi (14 bar)
• Double-row stainless steel ball bearings in all rotational joints
• Compact design and low-profile

Fully enclosed worm gear

protected from the elements Style 611 monitor shown
with Style 848-BC nozzle

Full 3" waterway

Vertical travel 360˚ continuous

controlled by hand horizontal rotation
wheel with worm gear

Double row stainless

steel ball bearings at all
rotational joints
Style 611

Horizontal twist lock

FM PROTEK Compatible with Style 911 Oscillating

APPROVED NFPA1964 Flange (page 69)

Readily transforms a manual monitor
COMPLIANT into an oscillating monitor

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 57
MONITORS INDUSTRIAL MONITORS

Industrial Monitors
• Ideal for marine, offshore, industrial and other corrosive environments
• Corrosion resistant cast brass construction
• Rugged, lightweight and flow-efficient monitors with high reliability and minimal maintenance
• Selection of tiller bar, single hand-wheel and dual hand-wheel monitor controls
• Wide range of monitors with capacity from 500 GPM (1900 LPM), 750 GPM (2900 LPM),
1250 GPM (4800 LPM) to 2000 GPM( 7570 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss for selected models
• Optional stream shaper (Style 119, 119-BC and 109) improves reach and straight jet performance
• Standard unit painted red

605 Industrial Monitor

• Full 2-1/4" waterway for flow rate of up to 500 GPM (1900 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 140˚ from 80˚ above and 60˚ below horizontal
• Positive friction locks with brass knob for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control

Style 605 monitor shown

with Style 367-BCTO nozzle
Style 605

Max. GPM (LPM) 500 (1900)

Size 2" 2-1/2" 3"
Inlet
Type Female Thread Flange
Style 605 Outlet 1-1/2"
Control Tiller Bar
Material Brass
Finish Red Powder Coating
28 psi at 500 gpm
Friction Loss
15 psi at 350 gpm
140° Vertical
Travel
360° Rotation
Weight 19 lbs. (9kg)

58 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
INDUSTRIAL MONITORS

611 Industrial Monitor

• Full 3" waterway for flow rate of up to 1250 GPM (4800 LPM) PROT
• Full 360˚ rotation FM
• Vertical travel of 140˚ from 85˚ above to 55˚ below horizontal APPROVED NFPA1
COMPL
• Vertical travel is controlled by hand wheel with worm gear
• Fully enclosed worm gear is protected from the elements
• Double-row stainless steel ball bearings in all rotational joints
• Compact design and low-profile
• FM approved
Style 611
Max. GPM (LPM) 1250 (4800)
Size 3" 4" 3"
Style 611 Inlet
Type Flange Female Thread
Outlet 2-1/2"
Control Single Hand-Wheel
Material Brass
Finish Red Powder Coating
26 psi at 1250 gpm
Friction Loss
18 psi at 1000 gpm
Style 611 monitor 140° Vertical
Travel
shown with Style 360° Rotation
848-BC nozzle Weight 56 lbs. (26kg)
Certification FM
612 Industrial Monitor
• Full 3" waterway for flow rate of up to 1250 GPM (4800 LPM) FM PROTEK
• Full 360˚ rotation APPROVED NFPA1964
COMPLIANT
• Vertical travel of 140˚ from 85˚ above to 55˚ below horizontal
• Vertical and horizontal travel are controlled by hand wheels with worm gears
• Fully enclosed worm gears are protected from the elements
• Double-row stainless steel ball bearings in all rotational joints
• Compact design and low profile
Style 612
Max. GPM (LPM) 1250 (4800)
Style 612 Size 3" 4" 3"
Inlet
Type Flange Female Thread
Outlet 2-1/2"
Control Dual Hand-Wheel
Material Brass
Finish Red Powder Coating
26 psi at 1250 gpm
Friction Loss
Style 612 monitor 18 psi at 1000 gpm
shown with Style 140° Vertical
Travel
848-BC nozzle 360° Rotation
Weight 60 lbs. (27kg)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 59
MONITORS INDUSTRIAL MONITORS

636 Industrial Monitor

• Full 2-1/2" waterway for flow rate of up to 750 GPM (2900 LPM)
• Full 360˚ rotation
• Vertical travel of 135˚ from 75˚ above to 60˚ below horizontal
• Positive friction locks for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control
• FM approved
Style 636
Max. GPM (LPM) 750 (2900)
Style 636 Size 3" 4" 6" 2-1/2"
Inlet
Type Flange Female Thread
Outlet 2-1/2"
FM PROTEK Control Tiller Bar
APPROVED NFPA1964 Material Brass
COMPLIANT Finish Red Powder Coating
35 psi at 750 gpm
Friction Loss
18 psi at 500 gpm
Style 636 monitor 135° Vertical
Travel
shown with Style 360° Rotation
823-BC nozzle Weight 44 lbs. (20kg)
Certification FM

648 Industrial Monitor

• Full 3-1/4”waterway for flow rate of up to 1250 GPM (4800 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 135˚ from 90˚ above and 45˚ below horizontal
• Positive friction locks with brass knob for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control

Style 648
Max. GPM (LPM) 1250 (4800)
Style 648
Size 3" 4"
Inlet
FM PROTEK Type Flange
NFPA1964 Outlet 2-1/2"
APPROVED
COMPLIANT Control Tiller Bar
Material Brass
Finish Red Powder Coating
13 psi at 1000 gpm
Style 648 monitor Friction Loss
20 psi at 1250 gpm
shown with Style
135° Vertical
835-BC nozzle Travel
360° Rotation
Weight 52 lbs. (23.5 kg)

60 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
INDUSTRIAL MONITORS

649 Industrial Monitor

• Full 3" waterway for flow rate of up to 1250 GPM (4800 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 150˚ from 90˚ above and 60˚ below horizontal
• Positive friction locks with brass knob for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control
• FM approved
Style 649
Style 649 Max. GPM (LPM) 1250 (4800)
Size 3" 4" 3"
Inlet
Type Flange Female Thread
PROTEK Outlet 2-1/2"
FM Control Tiller Bar
APPROVED NFPA1964 Material Brass
COMPLIANT
Finish Red Powder Coating
Style 649 monitor
shown with Style 18 psi at 1250 gpm
Friction Loss
848-BC nozzle 15 psi at 1000 gpm
150° Vertical
Travel
360° Rotation
Weight 56 lbs. (25kg)
Certification FM
736 Industrial Monitor
• Smooth internal waterway for efficient flow
• Seamless brass 2.5" waterway for flow rate of up to 1250 GPM (4800 LPM)
• Full 360˚ rotation
• Vertical travel of 135˚ from 90˚ above and 45˚ below cast brass swivel joints
• Stainless steel balls in all swivels
• Positive friction locks for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control
• FM approved
Style 736
Max. GPM (LPM) 1250 (4800)
Style 736 Size 3" 4" 6" 3"
Inlet
Type Flange Female Thread
Outlet 2-1/2"
Control Tiller Bar
Material Brass
Finish Red Powder Coating
24 psi at 1250 gpm
Friction Loss
FM PROTEK 20 psi at 1000 gpm
APPROVED NFPA1964
Travel
135° Vertical
COMPLIANT 360° Rotation
Style 736 monitor shown with
Weight 44 lbs. (20kg)
Style 823-BC nozzle
Certification FM

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 61
MONITORS INDUSTRIAL MONITORS

633 Industrial Monitor

• Full 2-3/4” waterway for flow rate of up to 750 GPM (2900 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 145˚ from 90˚ above to 55˚ below horizontal
• Operating pressure of 200 psi (14 bar)
• Vertical and horizontal travel are controlled by hand wheels with worm gears
• Standard unit painted red
Style 633
Max. GPM (LPM) 750 (2900)
Style 633 Size 3" 4" 3"
Inlet
Type Flange Female Thread
Outlet 2-1/2"
Control
PROTEK Dual Hand-Wheel
FM
Material Alloy
APPROVED NFPA1964
Finish
COMPLIANT Red Powder Coating
6 psi at 500 gpm
Friction Loss
13 psi at 750 gpm
Style 633 monitor
145° Vertical
shown with Travel
Style 847 nozzle 360° Rotation
Weight 28 lbs. (13kg)

655 Industrial Monitor

• Full 3-1/4” waterway for flow rate of up to 1250 GPM (4800 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 135˚ from 90˚ above and 45˚ below horizontal
• Operating pressure of 200 psi (14 bar)
• Vertical and horizontal travel are controlled by hand wheels with worm gears

Style 655
Style 655 Max. GPM (LPM) 1250 (4800)
Size 3" 4"
Inlet
Type Flange
Outlet 2-1/2"
Control Dual Hand-Wheel
FM PROTEK Material Alloy
APPROVED NFPA1964 Finish Red Powder Coating
COMPLIANT
13 psi at 1000 gpm
Style 655 monitor Friction Loss
20 psi at 1250 gpm
shown with
135° Vertical
Style 845 nozzle Travel
360° Rotation
Weight 28 lbs. (13kg)

62 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
INDUSTRIAL MONITORS

660 Industrial Monitor

• Full 4-1/4" waterway for flow rate of up to 2000 GPM (7570 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 135˚ from 90˚ above and 45˚ below horizontal
• Positive friction locks with brass knob for both horizontal and vertical travel to hold desired position
• Operating pressure of 200 psi (14 bar)
• Stainless steel lever for durability and easy control

Style 660 monitor Style 660

shown with Style 109 Max. GPM (LPM) 2000 (7570)
stream shaaper and 121 Size 4" 6"
quad stacked tips Inlet
Type Flange
Outlet 3-1/2"
Control Tiller Bar
Material Brass
Finish Red Powder Coating
38 psi at 2000 gpm
Friction Loss
15 psi at 1200 gpm
135° Vertical
Travel
Style 660 360° Rotation
Weight 97 lbs. (44kg) to 110 lbs. (50kg)

661 Industrial Monitor

• Full 4-1/4" waterway for flow rate of up to 2000 GPM (7570 LPM)
• Cast-in turning vanes for efficient flow and minimal friction loss
• Full 360˚ rotation
• Vertical travel of 135˚ from 90˚ above to 45˚ below horizontal
• Vertical and horizontal travel are controlled by hand wheels with worm gears
• Fully enclosed worm gears are protected from the elements
• Double-row stainless steel ball bearings in all rotational joints
• Compact design and low profile
Style 661
Style 661 monitor Max. GPM (LPM) 2000 (7570)
shown with Style Size 4" 6"
Inlet
837-BC nozzle Type Flange
Outlet 3-1/2"
Control Dual Hand-Wheel
Material Brass
Finish Red Powder Coating
38 psi at 2000 gpm
Friction Loss
15 psi at 1200 gpm
135° Vertical
Travel
360° Rotation
Style 661 Weight 106 lbs. (48kg) to 119 lbs. (54kg)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 63
MONITORS PORTABLE GROUND MONITORS

Protek's Portable Ground Monitors are highly manoeuvrable, operating like handline nozzles while delivering
much more water. These monitors are compact and lightweight with a low-profile design for stable operation.
They are simple to set up for quick attack operations, and can be left unmanned at the fire scene to conserve
manpower. The monitor body is constructed in hardcoat anodized aluminium with tough powder coating.
Available in either single-inlet (Style 600-1) or dual-inlet (Style 600-2) models .

Features:
• Flow rate of up to 500 GPM (1900 LPM)
• Horizontal rotation is adjustable 20˚ each side of centre
• Elevation is adjustable from 30˚ to 60˚ unmanned , and down to 20˚ when manned
• Ball shutoff with locking handle
• Carbide-tipped spikes at the base is resistant to long-term wear and provide excellent ground stability
• Large handle for excellent portability
600-1 Single-Inlet Portable Ground Monitor
600-2 Dual-Inlet Portable Ground Monitor
2-1/2" single swivel inlet Anchors safety strap Ergonomic carrying
for quick tie down handle
2-1/2" (x2) dual inlet

Carbide-tipped
Spring-loaded
ground spikes

Compact folding Ball shutoff with

Style 600-1 Style 600-2
legs for easy storage locking handle

Compatible Protek nozzle Style 600-1 Style 600-2

and accessories
Max. GPM (LPM) 500 (1900) 500 (1900)
Size 2-1/2" 2-1/2" (x2)
Inlet
Type Female Thread Female Thread
Outlet 2-1/2" 2-1/2"
Control Manual Manual
Material Alloy Alloy
Finish Red Powder Coating Red Powder Coating
Style 824 Style 117 10 psi at 500 gpm 10 psi at 500 gpm
Friction Loss
Monitor Nozzle 6 psi at 350 gpm 6 psi at 350 gpm
30° - 60° 30° - 60°
(unmanned) (unmanned)
Vertical
Down to 20° Down to 20°
Travel (manned) (manned)
20° 20°
Style 196 Horizontal Either Side Either Side
Monitor Bracket Weight 14 lbs. (7 kg) 22 lbs. (10 kg)
Style 119
(For Style 600-1)

64 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
DUAL-PURPOSE GROUND MONITORS

Protek's Dual-Purpose Ground Monitors are suitable for use as a portable monitor or a deck gun with features
to meet the changing demands of the fire service. These monitors are compatible with a wide range of Protek
nozzles. Available in either portable (Style 620 , 622-1 and 622-2) or deck-mount (Style 622-3) models.

Features:
• Full 3" waterway for flow rate of up to 1250 GPM (4800 LPM)
• Full 360˚ rotation in the deck model(Style 622-3) , 180˚ in the portable models (Style 620 , 622-1 and 622-2)
• Vertical travel of 63˚ from 12˚ to 75˚ above with inbuilt 37˚ safety stop from 18˚ to 55˚ above
• Carbide-tipped spikes for extended resistance to wear
• Large handle for excellent portability
• Fully enclosed worm gear is protected from the elements
• Dual integrated ball shut off enables shut off at both monitor inlet for enhanced control and flexibility
• Compatible with a wide range of Protek nozzles and accessories

622-1 Single-Inlet Dual-Purpose Portable Ground Monitors Style 622-1 and 622-2 monitor shown
622-2 Twin-Inlet Dual-Purpose Portable Ground Monitors with Style 847 nozzle

Liquid-filled Fully enclosed

pressure gauge 3" waterway worm gear

Dual spring-loaded lock

pins for quick and easy
breakapart

Style 622-1 Style 622-2

Spring-loaded forged 2-1/2" (x2) dual swivel inlet

aluminium folding legs
Single swivel inlet
Carbide-tipped spike
(available in 2-1/2" to 5")
for extended wear
resistance

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 65
MONITORS DUAL-PURPOSE GROUND MONITORS

620 Dual-Purpose Portable Ground Monitors

622-3 Deck-Mount Dual-Purpose Portable Ground Monitors

Style 620 monitor shown with Style 120 quad staked Style 622-3 Deck-Mount Ground Monitor
Shown with Style 847 nozzle

Liquid-filled
Dual intergrated pressure qauge
ball shutoff Fully enclosed
worm gear
3" waterway
2-1/2" (x2) dual
swivel inlet

Style 620

Spring-loaded forged
aluminium folding legs
Dual spring-loaded lock
pins for quick and easy
breakapart Style 622-3

Optional 3" or 4" flange

Style 622-1 Style 622-2 Style 620 Style 622-3

Max. GPM (LPM) 1000 (3800)* 800 (3030) 1250 (4800)
Size 2-1/2" to 5" 2-1/2" (x2) 3" 4" 3"
Inlet
Type Thread Thread Flange Thread
Outlet 2-1/2" 2-1/2" 2-1/2"
Control Single Hand-Wheel Single Hand-Wheel Single Hand-Wheel
Material Alloy Alloy Alloy
Finish Red Powder Coating Red Powder Coating Red Powder Coating
18 psi at 1000 gpm 15 psi at 800 gpm 24 psi at 1250 gpm
Frition Loss
12 psi at 700 gpm 12 psi at 750 gpm 18 psi at 1000 gpm
12° to 75° Vertical 12° to 75° Vertical 12° to 75° Vertical
Travel
180° Rotation 180° Rotation 360° Rotation
Weight 32 lbs. (15 kg) 32 lbs. (15 kg) 37 lbs. (17 kg) 27 lbs. (12 kg)
* Maximum flow rate is subject to selection of inlet size.

66 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
DUAL-PURPOSE GROUND MONITORS

Protek's Dual-Purpose Ground Monitors are compatible with a wide selection of Protek nozzles
and accessories (see page 70)

Style 656 shown with Style 190 Style 120 Style 119
Style 622 monitor liftoff Direct Mount Flange Quad Stacked Tips Stream Shaper

Style 847 Style 887 Style 888

Monitor Nozzle Self-Educting Nozzle (500GPM) Self-Educting Nozzle (750GPM)

Style 622 Monitor Liftoff

Style 656 Style 622 Shown with Style 120
Pipe Monitor Base Quad Stacked Tips

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 67
MONITORS PORTABLE OSCILLATING GROUND MONITORS

Protek's Portable Oscillating Ground Monitors have an effective sweeping water stream, designed for attack,
cooling, protection and haz-mat situations. They are powered by a water-driven turbine that sweeps the outlet
back and forth in a smooth and powerful motion while unmanned. As these monitors can be left unmanned,
resources can be conserved for deployment in other areas. Available in either single-inlet (Style 625-1) or
dual-inlet models (Style 625-2).
Features:
• The water-driven turbine induces the nozzle to oscillate at adjustable 12.5˚, 15˚ , 20˚ or 25˚either side of the
centre
• The on/off knob can be activated to stop oscillation at any point
• The oscillating mechanism can be disengaged to enable manual horizontal rotation
• Elevation is adjustable between 20˚ and 60˚ unmanned
• Carbide tipped spikes at the base is resistant to long-term wear and provide excellent ground stability
• Large handle for excellent portability
• Inbuilt pressure gauge
• Powder coating provides additional resistance to corrosion and wear
625-1 Single-Inlet Portable Ground Monitor
625-2 Dual-Inlet Portable Ground Monitor Inbuilt pressure gauge

Controls oscillating motion

Elevation is
Large handle
adjustable for
for excellent
Anchors safety Style 625-1 unmanned
portability
strap for quick operation
tie down Ball shutoff for
efficient flow Style 625-2
control
Adjustable
Low profile for sweeping range
excellent ground
stability 2-1/2" single swivel inlet
2-1/2" (x2) dual swivel inlet
Carbide tipped spikes
for extended Style 625-1 Style 625-2
resistance to wear Max. GPM (LPM) 500 (1900) 500 (1900)
Style 625-1 monitor shown with Size 2-1/2" 2-1/2" (x2)
Style 824 nozzle Inlet
Type FemaleThread FemaleThread
Style 625-2 monitor shown with Outlet 2-1/2" 2-1/2"
Style 822 nozzle
Control Manual Manual
Oscillating speed (with straight bore tip) Material Alloy Alloy
Cycles Per Flow @ 100 PSI Finish Red Powder Coating Red Powder Coating
Minute (7 BAR) Travel 40° Vertical 40° Vertical
8 175 GPM (660 LPM) 12.5˚, 15˚ , 20˚, 25˚ 12.5˚, 15˚ , 20˚, 25˚
Oscillating Degree
11 225 GPM (850 LPM) Either Side Either Side
22 350 GPM (1325 LPM) Min.Oscillating 50 psi (3.5 bar) 50 psi (3.5 bar)
Pressure
25 500 GPM (1900 LPM) Weight 28 lbs. (13 kg) 35 lbs. (16 kg)

68 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
MONITOR ACCESSORIES

Oscillating Flange
• Protek's Oscillating Flange readily transforms a manual monitor into an oscillating monitor
• Very easy to set up by unbolting the existing monitor and inserting either the Style 911
or 916 conversion kit between the flanges
• All oscillating flange components are constructed of high-grade brass for superior resistance
to corrosion and wear
• Oscillating movement is generated through a pelton wheel driven by water power
• Designed for refineries, process plants, tank farms, tank loading areas, offshore installation
and other high-risk areas
• Totally water-powered (no electric connections)
• Heavy-duty low friction loss brass waterway
• Style 918 Oscillating Monitor is the combination of Style 911 Oscillating Flange and Style
611 Industrial Monitor

911, 916 Oscillating Flange

Style 918
Style 911 flange shown
with Style 611 monitor and
848-BC nozzle
Style 911 Style 916

Style 911 Style 916

Max. GPM (LPM) 1250 (4800) 1250 (4800)
Inlet Flange 3" or 4" ANSI 3" or 4" ANSI
Outlet Flange 3" or 4" ANSI 3" or 4" ANSI
Waterway 3" 3"
Min. 50 psi (3.5 bar) Min. 50 psi (3.5 bar)
Operating Pressure
Max. 200 psi (14 bar) Max. 200 psi (14 bar)
Adjustable from Adjustable by 4 points
Oscillation Angle
30° to 330° 45°, 65°, 85°, 110°
6 cycles / min 8 cycles / min
Oscillation Speed*
@100 psi @100 psi
Flow Rate through 16 gpm 12 gpm
Water Drive Wheel @100 psi (7 bar) @100 psi (7 bar)
Test Connection 3/4" Garden hose 3/4" Garden hose
Brass Valve Brass Valve
Speed Control
(Externally accessible) (Externally accessible)
Weight 90 lbs (41 kg) 85 lbs (38 kg)
* Rated speed at 120° for Style 911 and at all oscillation angles for Style 916.

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 69
MONITORS MONITOR ACCESSORIES

Monitor Accessories
140 Drain Boss
• 1/2” NPT or BSP
• Brass construction
• Compatible with Style 611, 612, 649, 660, 661 monitors Style 140
and Style 911 oscillating flange

560 Monitor Ball-Valve Shutoff

• High quality brass body
• Accomodates a wide range of Protek monitors
• Improved sealing and increased gating ability

Style 560
Style 560
Max. GPM (LPM) 1800 GPM (6800)
Inlet Flange 3", 4" ANSI or 3" NPT
Outlet Flange 3", 4" ANSI or 3" NPT
Waterway 3"
Min. 50 psi (3.5 bar)
Operating Pressure
Max. 250 psi (17 bar)
Style 560 valve
Weight 54 lbs. (24.5 kg) shown with
Style 649 monitor

699 Hydrant Mount

• Allows a fixed site monitor to be mounted to a 2-1/2" (65 mm) hydrant port
• Height adjustment from the ground to centre of the hydrant discharge is
17-1/2" (445 mm) to 28" (712 mm)
• Length is 9-1/2" from the swivel to the middle of the flange
• 2-1/2" swivel inlet
• 3" or 4" ANSI outlet flange
• Maximum operating pressure 100 psi (7 bar)
• Maximum flow 1200 gpm (4500 lpm)

Style Weight Inlet Outlet

40 lbs. 2-1/2" 3" or 4"

699
(18.1 kg) swivel Flange
Style 699

70 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
REMOTE CONTROL MONITOR

Protek's Remote Control Monitor offers a rugged and durable design, suitable across various operations,
including wildland fire fighting, deicing, fixed site facility, dust control and front bumper turret. This compact,
lightweight, alloy-constructed monitor features a fully sealed integrated electrical control system with waterproof
locking connectors, power and control connections to withstand harsh environments. The monitor is designed
for water, foam and CAF applications. Compatible with Protek Electric Monitor Nozzles.
Features:
• 2-1/4" waterway for flow rate of up to 400 GPM (1525 LPM)
• Vertical travel of 135˚ from 90˚ above and 45˚ below horizontal
• Electric drives and circuit box are waterproof
• Gear motors totally enclosed and sealed to withstand harsh environments
• Current limit switch for pattern control, horizontal and vertical travel and open/close of electric valve
• Electronic controls with manual override
• Optional 180° or 300° horizontal rotation
• Automatic power off function during inactivity for enhanced performance and safety
• Programmable automatic oscillation and stow position
• Standard 24V with optional 12V or DC power supply

Durable, lightweight Adjustable �low-baf�le

alloy construction

Control system
components sealed
Style 818E, 819E, or 820E
Electric Monitor Nozzle

Water proof motor

and gear actuator
Style 922

Connection Cables
Wire joystick control

Control module

Style 922 monitor shown with standard accessories:

Electric nozzle, control module, connection cables, cable joystick control

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 71
MONITORS REMOTE CONTROL MONITOR

Style 922
Max. GPM (LPM) 400 (1525 LPM) Finish Red Powder Coating
Size 2" (50mm) 2-1/2" (65mm) 15 psi at 400 gpm
Inlet Friction Loss
Type Female Thread Flange 12 psi at 350 gpm
Outlet 1-1/2" (38mm) 135° Vertical
Travel
Control Electric 180° or 300° Rotation
Material Alloy Weight 15 lbs. (7 kg)

Protek’s Remote Control Monitors are compatible with a wide selection of optional accessories which
broadens the application of your monitors.

Style 922 2" Electric Valve Quick Connection

With Yellow Finish

Style 883
DC Power Supply 2.5” Flange Self-educting Monitor Nozzle

Style 111 Style 115

Terminal Board
Stream Shaper Smooth Bore Tips

72 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
WIRELESS REMOTE CONTROL MONITOR

Protek's Wireless Remote Control Monitors are technologically advanced electric deck monitors.
Wireless remote control facilitates effective use of personnel and lowers the potential risk of injury from
manual operations. There are no control cables between the joystick/transmitter and the monitor which
significantly reduce installation costs. The monitors provide easy programming of oscillation for exposure
protection or hazardous material suppression. Available in flows of up to 750 GPM (Style 933) or 1250 GPM
(Style 935, 955). Compatible with Protek Electric Control Monitor Nozzles.
Features:
• Allows operator to control the stream from as far as 200 metres* away from the monitor for safety and efficiency
• 2-3/4" waterway for flow rate of up to 750 GPM for Style 933
• 3-1/4" waterway for flow rate of up to 1250 GPM for Style 935 and 955
• Cast-in turning vanes for efficient flow and minimal friction loss
• Optional 180° (Style 933, 935), 300° (Style 933, 935) and 360° (Style 955) horizontal rotation
• Vertical travel 90° above and 45° below horizontal
• Choice of adjustable flow-baffle or automatic electric nozzle (see page 53)
• Electronic controls with manual override
• Brushless electric motor designed to eliminate sparks and reduce risk of ignition
• Automatic power off function during inactivity for enhanced performance and safety
• Programmable automatic oscillation and stow position
• Standard 24V with optional integrated AC-110V or AC-220V
• Optional 12V or DC power supply
Style 933 Adjustable Flow Baf�le
for Various Flows
Durable, Lightweight
Style 817E Electric
Alloy Construction
Monitor Nozzle

Motor Protection Via Remote control

Current Limiting monitor and nozzle

Manual Overide
Hexagon Screw
Water Proof Motor
Adjustable Stops on
and Gearbox
Horizontal Travel

Connection Cables

Control Module

Wireless Handheld
Transmitter
Panel Mount Primary
handheld Transmitter

Style 933 monitor shown with standard accessories: Style 817E nozzle, control
module, connection cables, primary transmitter and wireless transmitter

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 73
MONITORS WIRELESS REMOTE CONTROL MONITOR

Style 935 Style 955

Compatible with
Style 855E Nozzle Style 955 monitor shown with standard
accessories: Style 855E nozzle, monitor
mount control module and wireless
handheld transmitter

Monitor Mount Control Module

3-1/4" Waterway with

3-1/4" Waterway with
Cast-In Turning Vane
Cast-In Turning Vane

Control Module

Primary Handheld
Transmitter Manual Overide
Hexagon Screw

Wireless Handheld
Transmitter

Thread Leads for

connection to Power Supply

Style 935 monitor shown with standard

accessories: Style 855E nozzle,
control module, connection cables, Wireless Handheld
panel mount primary transmitter and wireless Transmmitter
handheld transmitter 3" Flange or 4" Flange
Style 933 Style 935 Style 955
Max. GPM (LPM) 750 (2900) 1250 (4800) 1250 (4800)
Size 3" 3" 4" 3" 4" 3" 4"
Inlet
Type Thread Flange Flange Flange
Outlet 2-1/2" 2-1/2" 2-1/2"
Control Electric Electric Electric
Material Alloy Alloy Alloy
Finish Red Powder Coating Red Powder Coating Red Powder Coating
15 psi at 750 gpm 16 psi at 1250 gpm 16 psi at 1250 gpm
Friction Loss
12 psi at 500 gpm 12 psi at 1000 gpm 12 psi at 1000 gpm
135° Vertical 135° Vertical 135° Vertical
Travel
180° or 300° Rotation 180° or 300° Rotation 360° Rotation
Weight 26 lbs. (12 kgs) 33 lbs. (15 kgs) 33 lbs. (15 kgs)
* Remote control distance is subject to free transmission obstructions and battery discharge.

74 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
WIRELESS REMOTE CONTROL MONITOR

Protek’s Remote Control Monitors are compatible with a wide selection of optional accessories
which broadens the application of your monitors.

IRCS Style 933 Style 887 Style 888

with Yellow Finish Self-educting Monitor Nozzle Self-educting Monitor Nozzle

Style 117, 118 and 120 Style 119 Touch Screen 2.5" or 3"
Smooth Bore Tips Stream Shaper Control Panel Electric Valve

Wire or Wireless DC Power Supply Terminal Board 3" or 4" Flange for
Joystick Control Style 933

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 75
MONITORS INTEGRATED REMOTE CONTROL SYSTEM

Intergrated Remote Control System

Protek’s Integrated Remote Control System (IRCS) is designed to protect important assets and properties from
dangerous fires from a remote location. Suitable for diverse applications from industrial complexes, refineries,
chemical plants, loading docks to railroad yards. The IRCS enables the operators to effectively control multiple
monitors that are strategically positioned to protect the asset from a safe distance.

The IRCS comprises hardware (remote control monitors, electric nozzles and valves), electrical capabilities
(master control touch panel and communication cables) and programming which are preset to your
requirements. Protek customizes all aspects of the IRCS to deliver a system that is suited to your needs and
integrated within your facilities.

Features:
• Effectively protects and monitors multiple designated locations or from a remote central station
• Effectively controls up to 16 monitors with an easy-to-use operating touch interface
• Offers alarm sensor with temperature deviation during activation
• Achieve more focused cost control and realize on-time delivery and installation
• Provides a tailored and scalable system to your specific requirements
• Provides build-in safety redundancy and reliability through back-up communications
• Delivers maximum performance and reliability whilst maintaining required project budget
• Provides flexible power supply options to accommodate the needs for most regions

Master control touch panel

Communication cable
IRCS shown with
Style 933 Remote Remote control
Control Monitor Set monitor and nozzle

Control module

Wire hub
Terminal board (optional 4 pin, 8 pin or 16 pin)

Connection cable
Primary and wireless transmitters

76 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 MONITORS
INTEGRATED REMOTE CONTROL SYSTEM

General Specifications
Available Flow (per monitor) 750-1250 GPM (2900-4800 LPM)
Number of Monitors in System Up to 16 standard and as required
Material Alloy
Control Electric
Communication Electric (discrete cable)
Power Supply AC-110V or AC-220V
Note: The above noted options are only a sample of the available options.

Key Controls
The IRCS can be activated from a remote location with the master control touch panel that enables the
operator to turn on the water supply, direct monitors vertically or horizontally, oscillate automatically,
and change the stream pattern of the nozzle all from a safe distance. The monitors can also be remote
controlled individually with wireless transmitters. Key standard control options include:

Screen 1
Master Control Touch Panel (Screen 1)
Home Page

Master Control Touch Panel (Screen 2)

1 Network Connection On/Off Switch
2 Power Connection On/Off Switch
3 Deployed Stations (station 4-8 or 16)
Screen 2
Master Control Touch Panel (Screen 3)
1 Stop stow or oscillating mode
2 Return to stow position
3 Enable oscillation
4 Inlet ball valve On/Off switch
5 Straight Stream
Screen 3 6 Upward vertical travel
7 Fog pattern
8 Right horizontal travel
9 Downward vertical travel
10 Left horizontal travel
11 Stream pattern panel
12 Vertical travel panel
13 Horizontal travel panel

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 77
MONITORS INTEGRATED REMOTE CONTROL SYSTEM

Application
Below is an example of custom-designed system/site lay-out. Each System lay-out carefully assesses
application function, site constraints and risk for optimal design.

78 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 FOAM EQUIPMENT
FOAM EDUCTORS

Protek's Foam Eductors range offers the In-Line Eductors and the Portable By-Pass Eductors. The eductors
feature a removable metering valve, and a large and easy-to-read removable metering dial with adjustable
settings of between 0% to 6%. Compatible with most foam concentrates.

Features:
• Eductors are rated for optimum flow at 200 psi (14 bar) inlet pressure
• Works well with nozzles rated at 75 psi (5 bar) and 100 psi (7 bar)
• Ball check valve prevents back flow into foam concentrate
• Supplied with clear foam pick up tube

In-Line Eductors
• 1-1/2" or 2-1/2" swivel inlet x 1-1/2" male
• 6-1/2' pickup hose and 15" stainless steel tube
• Pickup rate may be set at any position between 0% to 6% with detentes at
1/4, 1/2, 1, 3, and 6%

201-60 In-Line Eductor Style 201

• Brass construction
• 60 GPM ( 230 LPM)

201-95 In-Line Eductor

• Brass construction
• 95 GPM ( 360 LPM)

203-60 In-Line Eductor

• Lightweight alloy
• 60 GPM ( 230 LPM)

203-95 In-Line Eductor Style 203

• Lightweight alloy
• 95 GPM ( 360 LPM)

203-125 In-Line Eductor

• Lightweight alloy
• 125 GPM ( 475 LPM)

Flow Weight
Style Material Inlet Outlet Length
GPM LPM Lbs. (kg)
201-60 Brass 1-1/2"or 2-1/2"(38 or 65mm) 1-1/2"(38mm) 60 230 10.5"(276mm) 9.2(4.2kg)
201-95 Brass 1-1/2"or 2-1/2"(38 or 65mm) 1-1/2"(38mm) 95 360 10.5"(267mm) 9.2(4.2kg)
203-60 Alloy 1-1/2"or 2-1/2"(38 or 65mm) 1-1/2"(38mm) 60 230 8.6"(218mm) 3.5(1.6kg)
203-95 Alloy 1-1/2"or 2-1/2"(38 or 65mm) 1-1/2"(38mm) 95 360 8.6"(218mm) 3.5(1.6kg)
203-125 Alloy 1-1/2"or 2-1/2"(38 or 65mm) 1-1/2"(38mm) 125 475 8.6"(218mm) 3.5(1.6kg)

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 79
FOAM EQUIPMENT FOAM EDUCTORS

In-Line Eductor

205-250 In-Line Eductor

• Lightweight alloy
• 2-1/2" swivel x 2-1/2" male
• 250 GPM (950 LPM)
• 9' pickup hose and 15" stainless steel tube
• Pickup rate may be set at any position between
0% to 6% with detentes at 1/4, 1/2, 1, 3, and 6%
Style 205

Flow Weight
Style Material Inlet Outlet Length
GPM LPM Lbs(kg)
2-1/2" 2-1/2" 12" 8
205-250 Alloy 250 950
(65mm) (65mm) (305mm) (3.6kg)

Portable By-Pass Eductors

• Brass Construction
• 1-1/2" or 2-1/2" swivel inlet x 1-1/2" male
• Allows the operator to easily change from water to foam without shutting down
• Easy to change into water line use
• 6-1/2' pickup hose and 15" stainless steel tube
• Pickup rate may be set at any position between 0% to 6% with detentes at 1/4, 1/2, 1, 3, and 6%

222-60 Portable By-Pass Eductor

• 60 GPM (230 LPM)

222-95 Portable By-Pass Eductor

• 95 GPM (360 LPM)

222-125 Portable By-Pass Eductor

• 125 GPM (475 LPM) Style 222

Flow Weight
Style Material Inlet Outlet Length
GPM LPM Lbs(kg)
1-1/2"or 2-1/2" 1-1/2" 17" 22
222-60 Brass 60 230
(38 or 65mm) (38mm) (432mm) (10kg)
1-1/2"or 2-1/2" 1-1/2" 17" 22
222-95 Brass 95 360
(38 or 65mm) (38mm) (432mm) (10kg)
1-1/2"or 2-1/2" 1-1/2" 17" 22
222-125 Brass 125 475
(38 or 65mm) (38mm) (432mm) (10kg)

80 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 VALVES
GATED WYES, WATER THIEF & SIAMESE

Protek offers a wide selection of valves, including wyes, water thief and siamese. Wyes are used to divide
a single flow, allowing fire fighters to extend attack lines when pre-connects do not reach. Both 2-way and
3-way wye options are available. Water Thief allows fire fighters to extend attack lines from a main supply
line. Siamese is used to combine several hose lines into one. Both dual-inlet and trio-inlet siamese options
are available.

Wyes
• Available in lightweight alloy or brass construction
• Working pressure up to 200 psi (14 bar)
• Easy operation even at high flows
• Minimal friction loss
• Used to divide a single flow Style 505

505 Forestry Wye

• Male adapters are easily removed for seat adjustment
• 1" female inlet x two 1" male outlets
Style 506
506 Forestry Wye
• 1-1/2" female inlet x two 1" or 1-1/2" male outlets

520, 520-BC Leader Line Wye

• 2-1/2" female inlet x two 1-1/2" male outlets
Style 520

530 Leader Line Wye

• Self-locking handle for positive handle positioning
• 2-1/2" female inlet x two 1-1/2" male outlets

540, 540-BC Hydrant Wye Style 520-BC

• 2-1/2" to 6" female inlet x two 2-1/2" male outlets
• Self-locking handle for positive handle positioning

Weight
Style Material Inlet Outlet Lbs(kg)
1" F 1"M (×2) 2.2
505 Alloy (25mm) (25mm) (1kg)
Style 530
1-1/2" F 1" or 1-1/2"M (×2) 2.2
506 Alloy (38mm) (25 or 38mm) (1kg)
2-1/2" F 1-1/2"M (×2) 4
520 Alloy (65mm) (38mm) (1.8kg)
2-1/2" F 1-1/2"M (×2) 9
520-BC Brass (65mm) (38mm) (4.1kg)
2-1/2" F 1-1/2"M (×2) 6.4 Style 540
530 Alloy (65mm) (38mm) (2.9kg)
2-1/2" to 6" F 2-1/2"M (×2) 14.3
540 Alloy (65-150mm) (65mm) (6.4kg)
2-1/2" to 6" F 2-1/2"M (×2) 33
540-BC Brass (65-150mm) (65mm) (15kg)

Style 540-BC

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 81
VALVES GATED WYES, WATER THIEF & SIAMESE

541 Hydrant Wye

• 2-1/2" female inlet x two 2-1/2" male outlets

Style 541
542 Multi-Purpose Wye
• Flexibility of combining two hose lines in to one or dividing single flow into two way discharge
• Two 2-1/2" male or female inlets x 3" male or female outlet
• Optional outlet size from 2-1/2" to 6" male or female thread

550 3-Way Hydrant Wye

• Self-locking handle for positive handle positioning
• 2-1/2" to 6" female inlet x three 2-1/2" male outlets
Style 542

587 Plain Wye

• 2-1/2" female inlet x two 2-1/2" male outlets

Style 550
Weight
Style Material Inlet Outlet Lbs(kg)
2-1/2" F 2-1/2"M (×2) 8.8
541 Alloy (65mm) (65mm) (4kg)
2-1/2" M or F 3" M or F 12
542 Alloy (x2)(65mm) (75mm) (5.5 kg)
2-1/2" to 6" F 2-1/2"M (×3) 20
550 Alloy (65-150mm) (65mm) (9.2kg)
2-1/2" F 2-1/2"M (×2) 3.7
587 Alloy (65mm) (65mm) (1.7kg)
Style 587

Water Thief
• Lightweight alloy
• Self-locking handle for positive handle positioning
• Used for laying, extending or adding 1-1/2" or 2-1/2" lines without interfering with
operation of other lines
• 2-1/2" female inlet x one 2-1/2" and two 1-1/2" male outlets
510 Water Thief

Style Material Inlet Outlet Weight

Lbs. (kg)
510 Alloy 2-1/2"F 1-1/2"M (×2) & 2-1/2"M (×1) 13.5
(65mm) (38 & 65mm) (6.1kg) Style 510

82 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 VALVES
GATED WYES, WATER THIEF & SIAMESE

Siamese
• Available in lightweight alloy or brass construction
• Used to combine several hose lines into one
• Clappers allow additional lines to be added without interrupting flow
545, 545-BC Suction Siamese
• Used as suction inlet collection for pumpers
• Self-locking handle for positive handle positioning
• 2-1/2" swivel inlets come with strainers
• Two 2-1/2" female inlets x 2-1/2" to 6" female
555 3-Way Suction Siamese
• Used as suction inlet collection for pumpers
• Self-locking handle for positive handle positioning Style 545
• 2-1/2" swivel inlets come with strainers
• Three 2-1/2" female inlets x 2-1/2" to 6" female outlet
585 Clappered Valve Siamese
• Clappers allow additional lines to be added without interrupting flow
• Two 2-1/2" female inlet x 2-1/2" male outlet
• Come with drain valve

Style Material Inlet Outlet Weight

Lbs. (kg)
545 Alloy 2-1/2"F (×2) 2-1/2" to 6"F 15.8
(65mm) (65-150mm) (7.2kg)
545-BC Brass 2-1/2"F (×2) 2-1/2" to 6"F 36 Style 555
(65mm) (65-150mm) (16.5kg)
555 Alloy 2-1/2"F (×3) 2-1/2" to 6"F 21.3
(65mm) (65-150mm) (9.7kg)
585 Alloy 2-1/2"F (×2) 2-1/2"M 7
(65mm) (65mm) (3.2kg)

Valves
595 2-1/2" Hydrant Valve Style 585
• Lightweight alloy
• 2-1/2" full flow waterway
• Self-locking handle for positive handle positioning
• Adapter easily removed for seat adjustment
• 2-1/2" female inlet x 2-1/2" male outlet
596 2-1/2" Gate Valve
• Lightweight alloy Style 595
• Wedge seat gate valve
• Non-rising stem design
• Crank handle for easier operation
• 2-1/2" female inlet x 2-1/2" male outlet

Style Material Inlet Outlet Weight

Lbs. (kg)
595 Alloy 2-1/2"F 2-1/2"M 7.3
(65mm) (65mm) (3.3kg)
596 Alloy 2-1/2"F 2-1/2"M 4.6
(65mm) (65mm) (2.1kg) Style 596

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 83
TECHNICAL DATA SERVICE KITS

Handline Nozzles Monitors

Style Service Kit Style Service Kit
236 1236 600 1600 Protek has tailored service kits
238 1238 605 1605 for all of our product lines.
277 1277 611 1611
279 1001 612 1611 Each kit contains the most
280 1010 622 1622 frequently replaced parts.
302 1302 636 1636
303 1302 649 1649 Complete parts listing and
310 1007 736 1736
drawing are provided with each
311 1007 Monitor Nozzles service kit.
312 1008 Style Service Kit
314 1009
818 1818
314-TP 1009-TP
818-BC 1818-BC
321 1010
819 1818
322 1010
819-BC 1818-BC
323 1011
324 1012 820 1818
324-TP 1012-TP 820-BC 1818-BC
332 1032 822 1822
333 1033 822-BC 1822-BC
360 1000 823 1822
361 1000 823-BC 1822-BC
361F 1000 824 1826
362 1000 824-BC 1826-BC
366 1001 If you require service kits or
825-BC 1825-BC
366-BC 1001-BC 830 1830
have other technical queries,
366E 1001
835 1835 please contact us on:
366E-BC 1001-BC [email protected]
835-BC 1835-BC
366-F 1366-F
837-BC 1837-BC
367 1002
367-BC 1002-BC 845 1845
368 1002 845-BC 1845-BC Valves
Foam Eductors
368-TP 1002-TP 846 1846 Style Service Kit Style Service Kit
368-BC 1002-BC 847 1846-BC 201-60 1201 505 1505
369 1002 847-BC 1846-BC 201-95 1201 506 1505
371 1000 848 1848 510 1510
203-60 1203
372 1001 848-BC 1848-BC 520 1520
203-95 1203
372-BC 1001-BC 849 1848 520-BC 1520-BC
203-125 1203
372E 1001 849-BC 1848-BC
205-250 1205 530 1530
372E-BC 1001-BC 881-BC 1881-BC
222-60 1222 540 1540
372-F 1372F 883-BC 1881-BC
222-95 1222 540-BC 1540-BC
373 1002
886 1886 541 1541
373-BC 1002-BC 222-125 1222
886-BC 1886-BC 545 1540
374 1002
887 1886 545-BC 1540-BC
374-BC 1002-BC
375 1003 887-BC 1886-BC 550 1550
379 1001 888 1888 555 1550
396 1396 888-BC 1888-BC 585 1585
889 1889 587 1587
889-BC 1889-BC 595 1595
596 1596

84 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TECHNICAL DATA
FLOW & REACH DATA

The flow and reach data provides you with key information on our handline nozzle capabilities. The
following table outlines the flow setting and the straight stream reach for our handline nozzles at various
pressures. The data is compiled and updated by our Engineering & Testing departments.

Selectable Gallonage Handline Nozzles

Straight Stream Reach
Nozzle Pressure Flow Setting Actual Flow
Style Effective Overall
PSI BAR GPM LPM GPM LPM Feet Meters Feet Meters
5 19 4 15 45 13 55 16
10 37 9 34 45 13 55 16
75 5
24 90 21 79 65 19 75 22
40 150 35 132 75 22 85 26
5 19 5 19 50 15 60 18
360 10 37 10 37 50 15 60 18
100 7
(page 3) 24 90 24 90 70 21 80 24
40 150 40 150 90 27 100 30
5 19 6 22 55 16 65 20
10 37 11 42 55 16 65 20
125 8.5
24 90 27 102 70 21 80 18
40 150 45 170 90 29 105 32
13 50 11 42 50 15 60 18
25 100 22 83 60 18 70 21
75 5
40 150 35 132 75 22 85 25
60 230 52 197 95 29 105 32
13 50 13 50 55 16 65 20
361 25 100 25 100 60 18 70 21
100 7
(page 3) 40 150 40 150 90 27 100 30
60 230 60 230 105 32 115 35
13 50 15 57 55 16 65 19
25 100 28 106 65 19 75 23
125 8.5
40 150 45 170 95 29 105 32
60 230 67 254 110 34 120 36
12 50 10 38 50 15 60 18
75 5 23 90 20 76 65 19 75 22
30 115 26 98 70 21 80 24
12 50 12 50 55 16 65 19
362
100 7 23 90 23 90 70 21 80 24
(page 3)
30 115 30 115 75 22 85 26
12 50 13 49 60 18 70 21
125 8.5 23 90 26 98 70 21 80 24
30 115 34 129 80 24 90 27
Notes
Reach figures are measured with nozzle at 32° above horizontal. Overall reach is considered where the
furthest droplets of water fall, in still conditions. Effective reach is considered the furthest portion of
the water droplet foot print where fire fighting can be accomplished, in still conditions. These tests are
conducted in still conditions, so the actual results will vary depending upon conditions.

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 85
TECHNICAL DATA FLOW & REACH DATA

The flow and reach data provides you with key information on our handline nozzle capabilities. The
following table outlines the flow setting and the straight stream reach for our handline nozzles at various
pressures. The data is compiled and updated by our Engineering & Testing departments.

Selectable Gallonage Handline Nozzles

Straight Stream Reach
Nozzle Pressure Flow Setting Actual Flow
Style Effective Overall
PSI BAR GPM LPM GPM LPM Feet Meters Feet Meters
30 115 26 98 80 24 90 27
60 230 52 197 100 30 110 34
75 5
95 360 82 310 120 36 130 39
125 475 108 409 130 40 140 42
30 115 30 115 85 26 95 29
366 60 230 60 230 105 30 115 35
100 7
(page 4) 95 360 95 360 125 38 135 41
125 475 125 475 140 42 150 45
30 115 34 129 90 27 100 30
60 230 67 254 110 34 120 36
125 8.5
95 360 107 401 125 38 130 41
125 475 140 530 135 41 145 44
95 360 82 310 115 35 125 38
125 475 108 409 125 38 135 41
75 5 150 550 130 492 145 44 155 47
200 750 173 654 155 47 165 50
250 950 217 821 160 48 170 51
95 360 95 360 140 42 150 45
125 475 125 475 150 45 160 68
367, 368
100 7 150 550 150 550 160 48 170 51
(page 5-6)
200 750 200 750 170 51 180 54
250 950 250 950 175 53 185 56
95 360 106 401 115 44 155 47
125 475 140 530 145 47 165 50
125 8.5 150 550 168 636 160 48 170 51
200 750 224 848 175 53 185 56
250 950 280 1060 185 56 195 59

Notes
Reach figures are measured with nozzle at 32° above horizontal. Overall reach is considered where the
furthest droplets of water fall, in still conditions. Effective reach is considered the furthest portion of
the water droplet foot print where fire fighting can be accomplished, in still conditions. These tests are
conducted in still conditions, so the actual results will vary depending upon conditions.

86 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TECHNICAL DATA
FLOW & REACH DATA

The flow and reach data provides you with key information on our handline nozzle capabilities. The
following table outlines the flow setting and the straight stream reach for our handline nozzles at various
pressures. The data is compiled and updated by our Engineering & Testing departments.

Multi-Purpose Handline Nozzles

Straight Stream Reach
Nozzle Pressure Smooth Bore Flow
Orifice Size Effective Overall
PSI BAR GPM LPM Feet Meters Feet Meters
50 3.5 23 87 55 17 65 20
3/8"
75 5 50 114 65 20 75 23
50 3.5 45 170 65 20 75 23
1/2"
75 5 60 227 85 26 95 29
50 3.5 75 284 85 26 95 29
5/8"
75 5 95 360 105 32 115 35
50 3.5 108 409 105 32 115 35
3/4"
75 5 135 571 115 35 125 38
50 3.5 155 587 135 41 145 44
7/8"
75 5 190 719 155 47 165 50
50 3.5 187 708 135 41 145 44
15/16"
75 5 229 867 155 47 165 50
50 3.5 216 818 140 43 150 46
1"
75 5 266 1007 160 48 170 52

Combination Flows Fog Flows

Inlet Pressure Flow
Style Tip Size Inlet Pressure Flow
PSI BAR GPM LPM Style
50 3.5 66 250 PSI BAR GPM LPM
3/8"
75 5 78 295 50 3.5 42 160
332 50 3.5 88 333
1/2"
(page 9) 75 5 107 405 332 70 5 52 197
50 3.5 108 409
5/8" 100 7 60 226
75 5 136 515
50 3.5 199 753
3/4" 50 3.5 95 360
75 5 247 935
50 3.5 232 878
7/8" 333 75 5 118 445
333 75 5 289 1094
(page 9) 50 3.5 250 946 100 7 135 510
15/16"
75 5 313 1185
50 3.5 270 1022
1"
75 5 334 1264

Notes
Reach figures are measured with nozzle at 32° above horizontal. Overall reach is considered where the
furthest droplets of water fall, in still conditions. Effective reach is considered the furthest portion of
the water droplet foot print where fire fighting can be accomplished, in still conditions. These tests are
conducted in still conditions, so the actual results will vary depending upon conditions.

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 87
TECHNICAL DATA FLOW & REACH DATA

The flow and reach data provides you with key information on our handline nozzle capabilities. The
following table outlines the flow setting and the straight stream reach for our handline nozzles at different
pressures. The data is compiled and updated by our Engineering & Testing departments.

Constant Gallonage Handline Nozzles

Straight Stream Reach
100 psi Actual Flow
Effective Overall
Style Flow
75 psi 100 psi 125 psi 75 psi 100 psi 125 psi 75 psi 100 psi 125 psi
Setting
5 bar 7 bar 8.5 bar 5 bar 7 bar 8.5 bar 5 bar 7 bar 8.5 bar
13 11 13 15 GPM 55 65 75 65 75 85 Feet
50 42 49 57 LPM 16 20 23 20 23 26 Meters
25 22 25 28 GPM 70 75 85 80 85 95 Feet
371 100 83 100 106 LPM 21 23 26 24 26 29 Meters
(page 15) 40 35 40 45 GPM 75 85 95 85 95 105 Feet
150 132 150 170 LPM 23 26 29 26 29 32 Meters
60 52 60 67 GPM 85 95 105 95 105 115 Feet
230 197 230 254 LPM 26 29 32 29 32 35 Meters
60 52 60 67 GPM 85 95 105 95 105 115 Feet
230 197 230 254 LPM 26 29 32 29 32 35 Meters
372 95 82 95 106 GPM 90 115 125 100 125 135 Feet
(page 15) 360 310 360 401 LPM 27 35 38 30 38 41 Meters
125 108 125 140 GPM 115 125 135 125 135 145 Feet
475 409 475 530 LPM 35 38 41 38 41 44 Meters
150 130 150 168 GPM 135 145 160 140 155 165 Feet
550 492 550 636 LPM 41 44 47 44 47 50 Meters
373 200 173 200 224 GPM 130 145 160 140 155 170 Feet
(page 16) 750 655 750 848 LPM 40 44 49 42 47 52 Meters
250 217 250 280 GPM 150 160 170 160 170 180 Feet
950 821 950 1060 LPM 45 49 52 49 52 55 Meters
200 173 200 224 GPM 140 160 170 150 170 180 Feet
750 655 750 848 LPM 42 49 52 45 52 55 Meters
374 250 217 250 280 GPM 160 170 185 170 180 195 Feet
(page 16) 950 821 950 1060 LPM 49 52 56 52 55 59 Meters
300 260 300 335 GPM 170 190 200 180 200 210 Feet
1140 984 1140 1268 LPM 52 58 61 55 61 64 Meters

Notes
Reach figures are measured with nozzle at 32° above horizontal. Overall reach is considered where the
furthest droplets of water fall, in still conditions. Effective reach is considered the furthest portion of
the water droplet foot print where fire fighting can be accomplished, in still conditions. These tests are
conducted in still conditions, so the actual results will vary depending upon conditions.

88 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TECHNICAL DATA
COMPATIBILITY CHART

These charts are designed to help you determine Monitors Accessories

the compatibility of Protek monitors with its wide Industrial Monitors
selection of nozzles and available accessories. It will 605 111-BC
assist you in choosing the suitable nozzle(s) for your 611 119-BC 140 560 699 911 916
new monitor as well as the accessories that you may 612 119-BC 140 560 699 911 916
like to add in order to broaden the application of your 633 119 560 699 911 916
monitor. 636 119-BC 560 699 911 916
648 119-BC 560 699 911 916
649 119-BC 140 560 699 911 916
655 119 560 699 911 916
660 109 140
661 109 140
736 119-BC 560 699 911 916
Portable Ground Monitors
600-1 119 196
600-2 119
Portable Dual Purpose Ground Monitors
620 119 190
622-1 119 190
622-2 119 190
622-3 119 656 699
Combination of Style 911 Combination of Remote Controlled Monitors
oscillating flange, Style 649 monitor 922 Electric Valve, Quick Connection, Stream Shaper
Style 611 monitor and and Style 848-BC Wireless Remote Controlled Monitors
Style 847-BC monitor nozzle monitor nozzle 933 Touch Screen Control Panel, Wire or Wireless
935,955 Joystick Control, Electric Valve, IRCS, Stream Shaper
Monitors Nozzles (Handline / Monitors / Self-Educting) & Smooth Bore Tips
Industrial Monitors
605 366-BCTO 367-BCTO 372-BCTO 373-BCTO 818-BC 819-BC 820-BC 881-BC 883-BC
611 823-BC 825-BC 830 832 835-BC 845-BC 847-BC 848-BC 887-BC 888-BC 889-BC
612 823-BC 825-BC 830 832 835-BC 845-BC 847-BC 848-BC 887-BC 888-BC 889-BC
633 823 825 830 832 835 845 847 848 887 888 889
636 823-BC 847-BC 887-BC 888-BC
648 823-BC 825-BC 830 832 835-BC 845-BC 847-BC 848-BC 887-BC 888-BC 889-BC
649 823-BC 825-BC 830 832 835-BC 845-BC 847-BC 848-BC 887-BC 888-BC 889-BC
655 823 825 830 832 835 845 847 848 887 888 889
660 121 833 837-BC
661 121 833 837-BC
736 823-BC 825-BC 830 832 835-BC 845-BC 847-BC 848-BC 887-BC 888-BC 889-BC
Portable Ground Monitors
600-1 117 118 314-TO 368-TO 375-TO 822 824 881 883 886 887
600-2 117 118 314-TO 368-TO 375-TO 822 824 881 883 886 887
Portable Dual Purpose Ground Monitors
620 120 822 823 835 847 887 888
622-1 120 822 823 825 830 832 835 845 847 887 888
622-2 120 822 823 835 847 887 888
622-3 120 822 823 825 830 832 835 845 847 848 887 888 889
Portable Oscillating Ground Monitors
625-1 118 822 824 883 886 887
625-2 118 822 824 883 886 887
Remote Controlled Monitors
922 818E 819E 820E 881 883
Wireless Remote Controlled Monitors
933 817E 887 888
935,955 855E 887 888 889

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 89
TECHNICAL DATA EDUCTOR/NOZZLE PERFORMANCE DATA

This chart is designed to help you better understand the performance of our foam eductors at various
operating pressures. It will also help you choose a nozzle that is compatible with your eductor.

All of our eductors achieve their rated flow at an inlet pressure of 200 psi. At lower pressures the water
flow is less, but the flow of foam concentrate will remain the same. Consequently, the foam solution will
be a richer mixture than the metering valve indicates. In addition, at lower pressures (flows) the effective
reach of the nozzles decreases. Please take this into account when making your initial attack.

Foam Eductors
Flow Rate* Maximum Nozzle Effective
Eductor Recommanded Nozzles Inlet
Hose Lay^ Pressure Reach#
(pages 61-62) For Use With Eductor Pressure
GPM LPM (feet) (psi) (feet)

200 60 231 100 100 85

201-60 366, 372, 366-BC,
203-60 372-BC, 366E, 372E, 120 52 197 100 75 75
222-60 366E-BC, 372E-BC
100 42 156 100 50 65
200 95 360 150 100 95
150 82 310 150 75 90
366, 367, 368, 369, 372,
201-95 100 67 254 150 50 75
366-BC, 372-BC, 373-BC,
203-95
374-BC, 366E, 372E, 200 95 360 250 100 95
222-95
366E-BC, 372E-BC
150 82 310 250 75 90
100 67 254 250 50 75
200 125 475 150 100 100
150 108 408 150 75 90
366, 367, 368, 369, 372,
203-125 366-BC, 372-BC, 373-BC, 100 88 333 150 50 75
222-125 374-BC , 366E, 372E, 200 125 475 300 100 100
366E-BC, 372E-BC
150 108 408 300 75 90
100 88 333 300 50 75
200 250 950 200 100 120
368, 374, 368-BC,
205-250 150 217 821 200 75 110
374-BC
100 177 670 150 50 80

Notes
* Total flow when picking up 6% foam concentrate through metering valve.
^ Maximum hose lay from eductor discharge to nozzle.
# These figures are with foam solution flowing and the nozzle set on straight stream.

90 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TECHNICAL DATA
THREAD INFORMATION

These tables outline the most commonly used threads. However, Protek has the ability to cut many other
threads required by the fire service. Generally, there is no extra charge for these unique threads.

National Straight New York New York Pacific Chicago British

Standard Iron Pipe FD Corp Coast Fire Dept. Standard
Style (NH) (NPSH) (FDNY) (NYC) (PCT) (CFD) (BSP)
ODM TPI ODM TPI ODM TPI ODM TPI ODM TPI ODM TPI ODM TPI
3/4" 1.375 8 1.0353 14 1.0625 11 1.041 14
1" 1.375 8 1.295 11.5 1.66 8 1.3125 11.5 1.309 11
1-1/2" 1.99 9 1.8788 11.5 2.1 8 2.093 11 2.1 11 1.933 11.5 1.882 11
2" 2.515 8 2.3528 11.5 2.561 11 2.55 10 2.347 11
2-1/2" 3.068 7.5 2.841 8 3.03 8 3 8 3.046 7.5 2.99 7.5 2.96 11
3" 3.6239 6 3.47 8 3.46 11
3-1/2" 4.2439 6 3.97 8 4.052 8
4" 5.0109 4 4.47 8 5.011 4 4.45 11
4-1/4" 5.7609 4 4.97 8 5.761 4 4.95 11
5" 6.26 4 5.53 8 6.26 4 5.45 11
6" 7.025 4 6.59 8 6.45 11

ABBREVIATION DEFINITIONS
Canadian Standard 2-1/2" Hose Threads ODM – outside diameter of male
Code Description ODM TPI TPI – threads per inch
AMA Albert Mutual Aid 2.99 8
THREAD DESIGNATIONS
BCT British Columbia 3 8 National Hose – NH or NHT;
also called National Standard Thread (NST)
CSA Canadian Standards Association - Ontario 3.125 5
National Pipe Straight Hose – NPSH;
QST Province of Quebec Standard 3.031 7 also called Straight Iron Pipe Thread (SIPT)
National Pipe Thread – NPT;
WCT Western Canada Fire Underwriters 3.25 6 also called Tapered Iron Pipe Thread (TIPT)
NDC Nova Scotia - Zones 1 3.234 5 British Standard Parallel Pipe – BSPP
British Standard Pipe Taper – BSP

Flange Specifications
2-1/2" ANSI 3" ANSI 150# 4" ANSI 150#
DN80 PN16 DN100 PN16
150# DN80 PN20 DN100 PN20
Outside 7.5" 9"
7" 200mm 220mm
Diameter 190.5mm 230mm
0.75" 0.94"
Thickness 0.75" 22mm 22mm
20mm 23mm
Bolt Hole 6" 7.5"
5.5" 160mm 180mm
Circle 152.5mm 190.5mm
Number of
4 4 8 8 8
Bolts
Size of Bolts 5/8" 5/8" 5/8" 16mm 16mm

Please contact us on [email protected] to check availability of a specific thread on your product.

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 91
TECHNICAL DATA METRIC CONVERSION

Liquid Volume Tip Sizes

To Convert Into Multiply By   3/4" Tip = 19 mm   1-1/2" Tip = 38 mm
Ounces (oz) Mililiters (ml) 29.57   7/8" Tip = 22 mm   1-3/4" Tip = 45 mm
Pints (pt) Liters (l) 0.4732  1" Tip = 25 mm  2" Tip = 50 mm
Quarts (qt) Liters (l) 0.9464 1-1/8" Tip = 28 mm 2-1/4" Tip = 57 mm
Gallons (gal) Liters (l) 3.785 1-1/4" Tip = 32 mm 2-1/2" Tip = 64 mm
Mililiters (ml) Ounces (oz) 0.0338 1-3/8" Tip = 35 mm 3" Tip = 76 mm
Liters (l) Pints (pt) 2.113 Hose Sizes
Liters (l) Quarts (qt) 1.057 1" Hose = 25.4 mm  4" Storz =    100mm
Liters (l) Gallons (gal) 0.2642  1.5" Hose = 38.1 mm  4" Storz = 101.60mm
Solid Volume - Weight 1.75" Hose = 44.5 mm 4.5" Storz = 114.30mm
To Convert Into Multiply By 2" Hose = 63.5 mm  5" Storz = 125.00mm
Ounces (oz) Grams (g) 28.3495   2.5" Hose = 63.5 mm  5" Storz = 127.00mm
Pounds (lb) Kilograms (kg) 0.4536  3" Hose = 76.2 mm  6" Storz = 152.40mm
Grams (g) Ounces (oz) 0.035 3.5" Hose = 88.9 mm
Kilograms (kg) Pounds (lb) 2.205 Flow Rate
Pressure 12 gpm = 45.42 lpm = 45 lpm
To Convert Into Multiply By 13 gpm = 49.20 lpm = 50 lpm
Pounds per Square inch (psi) Kilopascals (kPa) 6.895 20 gpm = 75.70 lpm = 75 lpm
Pounds per Square inch (psi) bar 0.06895 23 gpm = 87.06 lpm = 90 lpm
Kilopascals (kPa) Pounds per Square inch (psi) 0.145 25 gpm = 94.62 lpm = 95 lpm
Kilopascals (kPa) bar 0.01
30 gpm =   113.55 lpm =   115 lpm
bar Pounds per Square inch (psi) 14.503
40 gpm =   151.40 lpm =   150 lpm
bar Kilopascals (kPa) 100
50 gpm =   189.25 lpm =   190 lpm
Length
55 gpm =   208.18 lpm =   210 lpm
To Convert Into Multiply By
inches (in) Milimeters (mm) 25.4 60 gpm =   227.10 lpm =   230 lpm
inches (in) Centimeters (cm) 2.54 70 gpm =   264.95 lpm =   265 lpm
Feet (ft) Centimeters (cm) 30.48 75 gpm =   283.88 lpm =   285 lpm
Yards (yd) Meters (m) 0.914 85 gpm =   321.73 lpm =   320 lpm
Miles (mi) Kilometers (km) 1.609 95 gpm =   359.58 lpm =   360 lpm
Milimeters (mm) inches (in) 0.039   100 gpm =   378.50 lpm =   380 lpm
Centimeters (cm) inches (in) 0.394   120 gpm =   454.20 lpm =   460 lpm
Meters (m) Yards (yd) 0.094   125 gpm =   473.13 lpm =   475 lpm
Kilometers (km) Miles (mi) 0.6214   150 gpm =   567.75 lpm =   550 lpm
Area   175 gpm =   662.38 lpm =   660 lpm
To Convert Into Multiply By
  200 gpm =   757.00 lpm =   750 lpm
Square inches (sq in) Square Centimeters (cm²) 6.425
  250 gpm =   946.25 lpm =   950 lpm
Square feet (sq ft) Square Meters (m²) 0.093
  300 gpm = 1135.50 lpm =    1140 lpm
Square Yards (sq yd) Square Meters (m²) 0.836
  350 gpm = 1324.75 lpm =    1325 lpm
Square Miles (sq mi) Square Kilometers (km²) 2.59
Square Centimeters (cm²) Square inches (sq in) 0.155   375 gpm = 1419.38 lpm =    1420 lpm
Square Meters (m²) Square feet (sq ft) 1.196   400 gpm = 1514.00 lpm =    1525 lpm
Square Kilometers (km²) Square Yards (sq yd) 0.386   450 gpm = 1703.25 lpm =    1700 lpm
Pressures   500 gpm = 1892.50 lpm =    1900 lpm
 50 psi = 345 kPa =  3.45 bar 300 psi = 2069 kPa = 20.69 bar   700 gpm = 2649.50 lpm =    2660 lpm
 60 psi = 414 kPa =   4.14 bar 350 psi = 2413 kPa = 24.13 bar   750 gpm = 2838.75 lpm =    2900 lpm
 70 psi = 488 kPa =  4.88 bar 400 psi = 2758 kPa = 27.58 bar   800 gpm = 3028.00 lpm =    3030 lpm
 75 psi = 517 kPa =   5.17 bar 450 psi = 3103 kPa = 31.03 bar 1000 gpm = 3785.00 lpm = 3800 lpm
 80 psi =  552 kPa =  5.52 bar 500 psi = 3448 kPa = 34.48 bar 1200 gpm = 4542.00 lpm = 4500 lpm
 90 psi =  621 kPa =  6.21 bar 550 psi = 3792 kPa = 37.92 bar 1250 gpm = 4731.25 lpm = 4800 lpm
100 psi =   690 kPa =     6.9 bar 600 psi = 4137 kPa = 41.37 bar 1500 gpm = 5677.50 lpm = 6000 lpm
150 psi = 1034 kPa = 10.34 bar 650 psi = 4482 kPa = 44.82 bar
2000 gpm = 7570.00 lpm = 7600 lpm
200 psi = 1379 kPa = 13.79 bar 700 psi = 4827 kPa = 48.27 bar
250 psi = 1723 kPa = 17.23 bar

92 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw
 TECHNICAL DATA
STYLE NUMBER INDEX

Style Page Style Page Style Page Style Page

100 35 203-95 79 314 15 366E 29
101 35 203-125 79 314-TP 15 366E-TO 29
101-BC 35 204 32 320 44 366E-BC 29
102 35 205-250 80 321 16 366E-BCTO 29
102-BC 36 208 34 322 16 366-F 23
103 36 209 34 322-SP 16 366-K 5
104 36 210 34 323 17 366-L 5
105 37 211 34 323-DP 17 367 5
106 37 212 37 324 17 367-TO 5
109 56 213 34 324-TP 17 367-BA 5
111 39 214 34 325 11 367-BC 5
112 37 215 34 326 11 367-BI 5
115 37 216 34 332 13 368 6
117 37 217 34 333 13 368-TO 6
118 37 218 34 350 23 368-BA 6
119 56 219 34 352 23 368-BC 6
119-BC 56 220 34 355 24 368-BCTO 6
120 37 221 56 356 24 368-BCTP 7
121 37 222-60 80 357 24 368-BI 7
129 39 222-95 80 360 3 368-TP 7
130 36 222-125 80 360-TO 3 369 6
130-BC 36 225 34 360-BA 3 369-TO 6
132 36 226 34 360-BC 3 369-BA 6
133 39 227 34 360-BCTO 3 371 19
133-BC 39 236 31 361 3 371-TO 19
135 39 238 32 361-TO 3 371-BC 19
137 39 277 33 361-BC 3 371-BCTO 19
139 39 279 33 361-BCTO 3 372 19
140 70 280 33 361-F 23 372-TO 19
150 39 302 26 362 4 372-BA 19
155 38 303 26 362-TO 4 372-BC 19
162 38 304 26 362-BC 4 372-BC 42
176 38 305 26 362-BCTO 4 372-BCTO 19
178 38 306 26 366 4 372E 30
182 38 307 41 366-TO 4 372E-TO 30
190 67 308-3 45 366-BA 4 372E-BC 30
191 39 308-6 45 366-BC 4 372E-BCTO 30
196 64 309 41 366-BC 42 372-F 23
201-60 79 310 15 366-BCTO 4 373 20
201-95 79 311 15 366-BCSP 42 373-TO 20
203-60 79 312 15 366-BI 5 373-BA 20

Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw 93
TECHNICAL DATA STYLE NUMBER INDEX

Style Page Style Page Style Page Style Page

373-BC 20 611 59 833 51 887 55
374 20 612 59 835 52 887-BC 55
374-BC 20 620 66 835-BC 52 888 55
374-BC 42 622-1 65 837-BC 52 888-BC 55
374-TP 21 622-2 65 845 50 889 56
374-BCTP 21 622-3 66 845-BC 50 889-BC 56
375 21 625-1 68 846 47 911 69
375-TO 21 625-2 68 846-BC 47 916 69
379 44 633 62 847 47 918 69
382 43 636 60 847-BC 47 922 71
385 43 648 60 848 47 933 73
386 43 649 61 848-BC 47 935 74
387-BC 27 655 62 849 47 955 74
388-BC 27 656 67 849-BC 47 IRCS 76
390 7 660 63 855E 53 2360 9
392 44 661 63 881 54 2361 9
396 7 699 70 881-BC 54 2365 9
505 81 736 61 883 54 2366 9
506 81 814 45 883-BC 54 2368 9
510 82 817E 53 886 55 2368-TP 9
520 81 818 49 886-BC 55
520-BC 81 818-BC 49
Accessories Page
530 81 818E 53
DC Power Supply 72, 75
540 81 819 49 Drum Pickup Kit 56
540-BC 81 819-BC 49 Electric Valve 72, 75
541 82 819E 53 Pistol Grips & Handles 40
542 82 820 49 Isolation Valve 56
545 83 820-BC 49 Nozzle Base & Teeth 40
545-BC 83 820E 53 Quick Connection 72
550 82 822 50 Terminal Board 72, 75
555 83 822-BC 50 Touch Screen Control Panel 75
560 70 823 50 Wire or Wireless Joystick Control 75
585 83 823-BC 50 Technical Data Page
587 82 824 50 Compatibility Chart 89
595 83 824-BC 50 Eductor/Nozzle Performance Data 90
596 83 825 52 Flow & Reach Data 85-88
600-1 64 825-BC 52 Metric Conversion 92
600-2 64 830 51 Service Kits 84
605 58 832 51 Thread Information 91

94 Protek Manufacturing Corp. Tel: +886-4-2567-2111 Fax: +886-4-2567-0098 www.protekfire.com.tw Email: sales@protekfire.com.tw